January 2011 - U-Boot

[U-Boot] [STATUS] Merge window closed
by Wolfgang Denk 17 Jan '11

17 Jan '11

Hi all, as you may be aware, the merge window ended last weekend. That means we're in review and bug fixing mode now. I'm sorry, but I have to admit tht I have a huge backlog - I did not even find a fraction of the time I'd have needed. I'll try to catch up now, but I need your help. Custodians: Please help me and take some of the load of sorting and processing open patches. An easy way to help me is to go through the open patches list in Patchwork. If you find patches that all into your field of activity, then please "grab" them, i. e. assign them to you. If you think I (or some other custodian) should handle a patch, assign it to me (or him). If you find a patch incorrectly assigned to you, don't complain - just reassign as appropriate. Oh, and every now and then check your todo list in Patchwork, and handle the patches on your list. Thanks in advance! Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de It is impractical for the standard to attempt to constrain the behavior of code that does not obey the constraints of the standard. - Doug Gwyn

1 0

[U-Boot] Please pull u-boot-mpc85xx.git
by Kumar Gala 17 Jan '11

17 Jan '11

The following changes since commit c6b734f5aea2ba75caaa1929f7e649ecda8d2f31: Merge branch 'master' of git://git.denx.de/u-boot-sh (2011-01-12 23:59:53 +0100) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx master Becky Bruce (9): socrates: rename sdram_setup fixed_sdram() mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition MPC8568/MPC8569: Remove CONFIG_DDR_DLL define tqm85xx: create fixed_sdram() to do sdram setup mpc85xx/tlb.c: Allow platforms to specify wimge bits mpc85xx boards: initdram() cleanup/bugfix mpc85xx: rename sdram_init() lbc_sdram_init() 85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN MPC8xxx DDR: align informational prints Chenhui Zhao (1): fsl_esdhc: Fix esdhc disabled problem on some platforms Jerry Huang (1): fsl_esdhc: Add the workaround for erratum ESDHC111 (enable on P4080) Kumar Gala (46): powerpc/85xx: Removed support for ATUM8548 board powerpc/85xx: Removed support for MPC8540EVAL board powerpc/85xx: Remove support for PM854/PM856 boards powerpc/85xx: Add support for booting from NAND on MPC8572DS powerpc/85xx: Replace CONFIG_SYS_HAS_SERDES with a weak function powerpc/85xx: Create a SERDES section in Makefile powerpc/86xx: Add SERDES support on MPC8641 & MPC8610 powerpc/85xx: Add is_serdes_configured() support for P2020 SERDES powerpc/85xx: Add is_serdes_configured() support for MPC8572 SERDES powerpc/85xx: Add is_serdes_configured() support for MPC8548 SERDES powerpc/85xx: Add is_serdes_configured() support for MPC8568 SERDES powerpc/85xx: Add is_serdes_configured() support for MPC8569 SERDES powerpc/85xx: Add is_serdes_configured() support for MPC8544 SERDES powerpc/85xx: Add is_serdes_configured() support for P1021 SERDES powerpc/8xxx: Replace is_fsl_pci_cfg with is_serdes_configured powerpc/85xx: Cleanup SGMII detection and reporting powerpc/85xx: Fix bug in dcache_disable powerpc/fsl-pci: Determine pci_controller based on cfg addr for dts fixup powerpc/fsl-pci: Add generic code to setup PCIe controllers powerpc/85xx: Rework MPC8572DS pci_init_board to use common FSL PCIe code powerpc/85xx: Rework P2020DS pci_init_board to use common FSL PCIe code powerpc/85xx: Rework MPC8544DS pci_init_board to use common FSL PCIe code powerpc/85xx: Rework MPC8536DS pci_init_board to use common FSL PCIe code powerpc/86xx: Rework MPC8641HPCN pci_init_board to use common FSL PCIe code powerpc/85xx: Rework MPC8548CDS pci_init_board to use common FSL PCIe code powerpc/8xxx: Rework XES boards pci_init_board to use common FSL PCIe code powerpc/85xx: Rework TQM boards pci_init_board to use common FSL PCIe code powerpc/85xx: Rework MPC8568MDS pci_init_board to use common FSL PCIe code powerpc/85xx: Rework MPC8569MDS pci_init_board to use common FSL PCIe code powerpc/85xx: Rework P1_P2_RDB pci_init_board to use common FSL PCIe code powerpc/86xx: Rework MPC8610HPCD pci_init_board to use common FSL PCIe code powerpc/86xx: Rework SBC8641 pci_init_board to use common FSL PCIe code powerpc/85xx: Rework SBC8548 pci_init_board to use common FSL PCIe code powerpc/85xx: Rework corenet_ds pci_init_board to use common FSL PCIe code powerpc/8xxx: Refactor SRIO initialization into common code powerpc/85xx: Convert MPC8548CDS to use common SRIO init code powerpc/85xx: Convert MPC8568MDS to use common SRIO init code powerpc/85xx: Convert MPC8569MDS to use common SRIO init code powerpc/86xx: Enable common SRIO init code powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code powerpc/86xx: Convert SBC8641 to use common SRIO init code powerpc/8xxx: Move fsl_is_spd() into generic 8xxx ddr code powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards powerpc/85xx: Add the workaround for erratum CPC-A002 (enable on P4080) powerpc/85xx: Add the workaround for erratum CPC-A003 (enable on P4080) powerpc/85xx: Add the workaround for erratum ELBC-A001 (enable on P4080) Li Yang (1): powerpc/85xx: Add SRIO support to P2020DS Paul Gortmaker (1): MPC8xxx: Update maintainer entry for Wind River sbc8xxx boards Peter Tyser (1): fsl_pci: Update PCIe boot ouput Piergiorgio Beruto (1): powerpc/85xx: Fix wrong SVR value for MPC8567 and MPC8567E processors Roy Zang (2): fsl_esdhc: Add the workaround for erratum ESDHC135 (enable on P4080) fsl_esdhc: Add the workaround for erratum ESDHC136 (enable on P4080) MAINTAINERS | 17 +- README | 18 + arch/powerpc/cpu/mpc85xx/Makefile | 18 +- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 24 +- arch/powerpc/cpu/mpc85xx/cpu.c | 52 ++ arch/powerpc/cpu/mpc85xx/cpu_init.c | 29 +- arch/powerpc/cpu/mpc85xx/fdt.c | 7 +- arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 95 +++ arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 65 ++ arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c | 65 ++ arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c | 74 ++ arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c | 81 +++ arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 64 ++ arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 73 ++ arch/powerpc/cpu/mpc85xx/start.S | 4 +- arch/powerpc/cpu/mpc85xx/tlb.c | 6 +- arch/powerpc/cpu/mpc86xx/Makefile | 2 + arch/powerpc/cpu/mpc86xx/cpu_init.c | 11 +- arch/powerpc/cpu/mpc86xx/fdt.c | 7 +- arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c | 85 +++ arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c | 94 +++ arch/powerpc/cpu/mpc8xxx/Makefile | 2 +- arch/powerpc/cpu/mpc8xxx/ddr/main.c | 5 +- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 22 +- arch/powerpc/cpu/mpc8xxx/fdt.c | 23 +- arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 17 +- arch/powerpc/cpu/mpc8xxx/pci_cfg.c | 204 ------ arch/powerpc/cpu/mpc8xxx/srio.c | 86 +++ arch/powerpc/include/asm/fsl_ddr_sdram.h | 16 +- arch/powerpc/include/asm/fsl_law.h | 1 + arch/powerpc/include/asm/fsl_lbc.h | 8 +- arch/powerpc/include/asm/fsl_pci.h | 57 +-- arch/powerpc/include/asm/immap_85xx.h | 4 +- arch/powerpc/include/asm/immap_86xx.h | 4 +- arch/powerpc/include/asm/processor.h | 4 +- board/atum8548/Makefile | 57 -- board/atum8548/atum8548.c | 297 -------- board/atum8548/ddr.c | 83 --- board/atum8548/law.c | 61 -- board/atum8548/tlb.c | 90 --- board/freescale/corenet_ds/corenet_ds.c | 44 -- board/freescale/corenet_ds/ddr.c | 18 +- board/freescale/corenet_ds/pci.c | 118 +--- board/freescale/mpc8536ds/mpc8536ds.c | 160 +---- board/freescale/mpc8540ads/mpc8540ads.c | 61 +-- board/freescale/mpc8540ads/tlb.c | 19 - board/freescale/mpc8541cds/mpc8541cds.c | 52 +-- board/freescale/mpc8544ds/law.c | 10 +- board/freescale/mpc8544ds/mpc8544ds.c | 139 +--- board/freescale/mpc8548cds/law.c | 13 +- board/freescale/mpc8548cds/mpc8548cds.c | 91 +-- board/freescale/mpc8548cds/tlb.c | 9 +- board/freescale/mpc8555cds/mpc8555cds.c | 54 +-- board/freescale/mpc8560ads/mpc8560ads.c | 61 +-- board/freescale/mpc8560ads/tlb.c | 19 - board/freescale/mpc8568mds/law.c | 7 +- board/freescale/mpc8568mds/mpc8568mds.c | 95 +-- board/freescale/mpc8569mds/law.c | 5 +- board/freescale/mpc8569mds/mpc8569mds.c | 76 +-- board/freescale/mpc8572ds/config.mk | 8 +- board/freescale/mpc8572ds/law.c | 8 +- board/freescale/mpc8572ds/mpc8572ds.c | 143 +---- board/freescale/mpc8572ds/tlb.c | 14 +- board/freescale/mpc8610hpcd/law.c | 8 +- board/freescale/mpc8610hpcd/mpc8610hpcd.c | 79 +-- board/freescale/mpc8641hpcn/law.c | 10 +- board/freescale/mpc8641hpcn/mpc8641hpcn.c | 51 +-- board/freescale/p1022ds/p1022ds.c | 80 +-- board/freescale/p1_p2_rdb/ddr.c | 15 +- board/freescale/p1_p2_rdb/law.c | 6 +- board/freescale/p1_p2_rdb/p1_p2_rdb.c | 8 +- board/freescale/p1_p2_rdb/pci.c | 65 +-- board/freescale/p2020ds/law.c | 8 +- board/freescale/p2020ds/p2020ds.c | 154 +---- board/mpc8540eval/Makefile | 54 -- board/mpc8540eval/ddr.c | 73 -- board/mpc8540eval/flash.c | 894 ------------------------ board/mpc8540eval/law.c | 54 -- board/mpc8540eval/mpc8540eval.c | 230 ------ board/mpc8540eval/tlb.c | 78 -- board/pm854/Makefile | 53 -- board/pm854/ddr.c | 73 -- board/pm854/law.c | 58 -- board/pm854/pm854.c | 298 -------- board/pm854/tlb.c | 117 --- board/pm856/Makefile | 53 -- board/pm856/ddr.c | 73 -- board/pm856/law.c | 58 -- board/pm856/pm856.c | 453 ------------ board/pm856/tlb.c | 117 --- board/sbc8548/law.c | 8 - board/sbc8548/sbc8548.c | 99 +--- board/sbc8548/tlb.c | 34 +- board/sbc8560/sbc8560.c | 93 +--- board/sbc8641d/law.c | 5 - board/sbc8641d/sbc8641d.c | 66 +-- board/socrates/sdram.c | 15 +- board/stx/stxgp3/stxgp3.c | 32 - board/stx/stxssa/stxssa.c | 33 - board/tqc/tqm85xx/law.c | 9 +- board/tqc/tqm85xx/sdram.c | 70 +-- board/tqc/tqm85xx/tlb.c | 47 -- board/tqc/tqm85xx/tqm85xx.c | 44 +- board/xes/common/Makefile | 2 - board/xes/common/fsl_8xxx_ddr.c | 46 -- board/xes/common/fsl_8xxx_pci.c | 113 +--- board/xes/xpedite517x/law.c | 8 - board/xes/xpedite517x/xpedite517x.c | 13 + board/xes/xpedite520x/law.c | 8 - board/xes/xpedite537x/law.c | 12 - board/xes/xpedite550x/law.c | 12 - boards.cfg | 9 +- doc/README.atum8548 | 29 - doc/README.mpc85xxads | 4 +- drivers/mmc/fsl_esdhc.c | 29 +- drivers/pci/fsl_pci_init.c | 183 +++++- drivers/pci/pci.c | 12 + include/configs/ATUM8548.h | 443 ------------ include/configs/MPC837XEMDS.h | 1 + include/configs/MPC837XERDB.h | 1 + include/configs/MPC8536DS.h | 8 +- include/configs/MPC8540ADS.h | 3 +- include/configs/MPC8540EVAL.h | 362 ---------- include/configs/MPC8541CDS.h | 3 +- include/configs/MPC8544DS.h | 6 +- include/configs/MPC8548CDS.h | 19 +- include/configs/MPC8555CDS.h | 3 +- include/configs/MPC8560ADS.h | 3 +- include/configs/MPC8568MDS.h | 15 +- include/configs/MPC8569MDS.h | 25 +- include/configs/MPC8572DS.h | 122 +++- include/configs/MPC8610HPCD.h | 4 +- include/configs/MPC8641HPCN.h | 31 +- include/configs/P1022DS.h | 4 +- include/configs/P1_P2_RDB.h | 6 +- include/configs/P2020DS.h | 28 +- include/configs/P4080DS.h | 9 +- include/configs/PM854.h | 426 ----------- include/configs/PM856.h | 429 ------------ include/configs/SBC8540.h | 2 +- include/configs/TQM85xx.h | 6 +- include/configs/corenet_ds.h | 21 +- include/configs/sbc8560.h | 2 +- include/configs/sbc8641d.h | 15 +- include/configs/stxgp3.h | 2 +- include/configs/stxssa.h | 1 - include/pci.h | 1 + nand_spl/board/freescale/mpc8572ds/Makefile | 133 ++++ nand_spl/board/freescale/mpc8572ds/nand_boot.c | 82 +++ 149 files changed, 2041 insertions(+), 7586 deletions(-) create mode 100644 arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/p1021_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/p2020_serdes.c create mode 100644 arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c create mode 100644 arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c delete mode 100644 arch/powerpc/cpu/mpc8xxx/pci_cfg.c create mode 100644 arch/powerpc/cpu/mpc8xxx/srio.c delete mode 100644 board/atum8548/Makefile delete mode 100644 board/atum8548/atum8548.c delete mode 100644 board/atum8548/ddr.c delete mode 100644 board/atum8548/law.c delete mode 100644 board/atum8548/tlb.c delete mode 100644 board/mpc8540eval/Makefile delete mode 100644 board/mpc8540eval/ddr.c delete mode 100644 board/mpc8540eval/flash.c delete mode 100644 board/mpc8540eval/law.c delete mode 100644 board/mpc8540eval/mpc8540eval.c delete mode 100644 board/mpc8540eval/tlb.c delete mode 100644 board/pm854/Makefile delete mode 100644 board/pm854/ddr.c delete mode 100644 board/pm854/law.c delete mode 100644 board/pm854/pm854.c delete mode 100644 board/pm854/tlb.c delete mode 100644 board/pm856/Makefile delete mode 100644 board/pm856/ddr.c delete mode 100644 board/pm856/law.c delete mode 100644 board/pm856/pm856.c delete mode 100644 board/pm856/tlb.c delete mode 100644 board/xes/common/fsl_8xxx_ddr.c delete mode 100644 doc/README.atum8548 delete mode 100644 include/configs/ATUM8548.h delete mode 100644 include/configs/MPC8540EVAL.h delete mode 100644 include/configs/PM854.h delete mode 100644 include/configs/PM856.h create mode 100644 nand_spl/board/freescale/mpc8572ds/Makefile create mode 100644 nand_spl/board/freescale/mpc8572ds/nand_boot.c

2 1

[U-Boot] [GIT PULL] Pull request: u-boot-imx
by Stefano Babic 17 Jan '11

17 Jan '11

Hi Wolfgang, The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59: Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master Liu Hui-R64343 (9): MX51EVK: UART does not print out the early information MX5: Add initial support for MX53 processor fec_mxc: add support for MX53 processor serial_mxc: add support for MX53 processor mxc_gpio: add support for MX53 processor mxc_i2c: add support for MX53 processor fsl_pmic: add I2C interface support imximage: Add MX53 boot image support MX5:MX53: add initial support for MX53EVK board MAINTAINERS | 4 + arch/arm/cpu/armv7/mx5/iomux.c | 30 ++- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++--- arch/arm/cpu/armv7/mx5/soc.c | 22 +- arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 + arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++--- arch/arm/include/asm/arch-mx5/iomux.h | 102 ------ arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469 ++++++++++++++++++++++++++- board/freescale/mx51evk/mx51evk.c | 11 +- board/freescale/mx53evk/Makefile | 48 +++ board/freescale/mx53evk/config.mk | 24 ++ board/freescale/mx53evk/imximage.cfg | 112 +++++++ board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++++++++++ boards.cfg | 1 + doc/README.imximage | 12 +- drivers/gpio/mxc_gpio.c | 9 +- drivers/i2c/mxc_i2c.c | 21 +- drivers/misc/fsl_pmic.c | 45 +++- drivers/net/fec_mxc.c | 2 +- drivers/net/fec_mxc.h | 4 +- drivers/serial/serial_mxc.c | 6 + include/configs/mx51evk.h | 5 +- include/configs/mx53evk.h | 193 +++++++++++ include/configs/vision2.h | 3 +- include/mc13892.h | 5 + tools/imximage.c | 421 +++++++++++++++++++----- tools/imximage.h | 110 +++++-- 27 files changed, 1900 insertions(+), 334 deletions(-) mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h create mode 100755 board/freescale/mx53evk/Makefile create mode 100755 board/freescale/mx53evk/config.mk create mode 100644 board/freescale/mx53evk/imximage.cfg create mode 100755 board/freescale/mx53evk/mx53evk.c mode change 100644 => 100755 drivers/i2c/mxc_i2c.c mode change 100644 => 100755 include/configs/mx51evk.h create mode 100755 include/configs/mx53evk.h -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office(a)denx.de =====================================================================

3 5

[U-Boot] [GIT PULL] Pull request: u-boot-i2c
by Heiko Schocher 17 Jan '11

17 Jan '11

Hello Wolfgang, The following changes since commit 89c95f0cd3f8140f3b8a82a22a6a144c148d09c6: asm-offsets: generate bd_t size (2011-01-09 18:08:20 +0100) are available in the git repository at: git://git.denx.de/u-boot-i2c.git master Chris Packham (1): pca953x: support 16-pin devices README | 4 ++ drivers/gpio/pca953x.c | 114 ++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 95 insertions(+), 23 deletions(-) bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] Pull request: nand flash
by Scott Wood 17 Jan '11

17 Jan '11

The following changes since commit c6b734f5aea2ba75caaa1929f7e649ecda8d2f31: Wolfgang Denk (1): Merge branch 'master' of git://git.denx.de/u-boot-sh are available in the git repository at: git://git.denx.de/u-boot-nand-flash.git master Alexander Holler (1): nand: fix bug with multiple NAND devices if CONFIG_MTD_DEVICE is defined. Lei Wen (2): NAND: add the ability to directly write yaffs image mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident() common/cmd_nand.c | 15 +++++++++- drivers/mtd/nand/atmel_nand.c | 2 +- drivers/mtd/nand/nand.c | 2 +- drivers/mtd/nand/nand_base.c | 29 ++++++++++--------- drivers/mtd/nand/nand_util.c | 63 +++++++++++++++++++++++++++++++++++----- include/linux/mtd/nand.h | 4 ++- include/nand.h | 2 +- 7 files changed, 90 insertions(+), 27 deletions(-)

2 1

[U-Boot] Problem using CodeSourcery 2010.9-50 ARM GDB to debug U-boot w/BDI
by Peter Barada 17 Jan '11

17 Jan '11

I'm using the latest ARM GDB from CodeSourcery with a BDI to debug U-Boot 2010.12-rc3 on my hardware and I have a problem trying to access symbols in .bss after loading the symbol table to the relocated address. Apparenlty GDB is translating symbols in .text but not symbols in .bss: Current directory is /home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-20101216/rpm/BUILD/u-boot-svn/board/ti/logic/ GNU gdb (Sourcery G++ Lite 2010.09-50) 7.2.50.20100908-cvs Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-none-linux-gnueabi". For bug reporting instructions, please see: <https://support.codesourcery.com/GNUToolchain/>. (gdb) pwd Working directory /home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-20101216/rpm/BUILD/u-boot-svn. (gdb) add-symbol-file u-boot 0x8ff74000 add symbol table from file "u-boot" at .text_addr = 0x8ff74000 (y or n) y Reading symbols from /home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-20101216/rpm/BUILD/u-boot-svn/u-boot...done. (gdb) p &NS16550_getc $1 = (char (*)(NS16550_t)) 0x8ff91de0 <NS16550_getc> (gdb) p &htab $2 = (struct hsearch_data *) 0x804783fc (gdb) tar remote abatron:2001 Remote debugging using abatron:2001 0x8ff91de4 in NS16550_getc (com_port=0x4806a000) at ns16550.c:87 (gdb) info file Remote serial target in gdb-specific protocol: Debugging a target over a serial line. (gdb) p/x ((gd_t*)$r8)->reloc_off $3 = 0xfb74000 (gdb) p/x ((gd_t*)$r8)->relocaddr $4 = 0x8ff74000 My version of u-boot is linked at 0x80400000, and the relevant addresses from the u-boot ELF file are: 8041dde0 T NS16550_getc 804783fc b htab NS16650_getc has been properly translated from 0x8041dde0 by 0xfb74000 (as the symbol table is loaded at address 0x8ff74000 instead of 0x80400000), but htab has not been translated. Has anyone seen this type of problem before? Any suggestions? Thanks in advance! -- Peter Barada peter.barada(a)logicpd.com

1 0

[U-Boot] U-Boot mpc8603 support
by Murat Artun 17 Jan '11

17 Jan '11

Is there anyone who has an experience on this CPU with U-Boot? -- M u r at A r t u n, MSc. Design Engineer "be conservative in what you do, be liberal in what you accept from others"

2 2

[U-Boot] GREETINGS
by veralove10＠hotmail.com 17 Jan '11

17 Jan '11

Hello Dear, How are you today i hope every thing is well with you.I'm miss Vera by name,single,caring and loving girl,is a pleasure to contact you,i want us to hold a good relationship. I will appreciate if you can write me back for easiest communication and to know more about each other so that i will explain myself to you and also send my picture to you.Take care and have a nice day. I await hearing from you soonest. Yours truly Vera.

1 0

[U-Boot] Uboot with at91sam9G20ek
by Abhishek Ashtekar 17 Jan '11

17 Jan '11

Hello, I have spent now more than 2 weeks with U - boot and want the network interface to work so that tftpboot works but my current state seems not very encouraging. A) I am using the AT91SAM9G20EK board. I downloaded tried the U-Boot.2010.12. I have the following results (issues) when I try to build. 1) make at91sam9g20ek_nandflash_config make CROSS_COMPILE=arm-linux- Error 1: You need to define CONFIG_AT91FAMILY in your board config Action: Defined CONFIG_AT91FAMILY in the file /include/configs/at91sam9260ek.h Also defined CONFIG_AT91SAM9G20EK in the same file 2) Error 2: board.c:233: CONFIG_SYS_SDRAM_BASE undeclared Error 3: board.c:279: CONFIG_SYS_INIT_SP_ADDR undeclared Error 4: board.c:312: CONFIG_SYS_SDRAM_BASE undeclared In the file board.c, #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - GENERATED_GBL_DATA_SIZE) 3) Error 5: Undefined reference to 'CONFIG_SYS_INIT_SP_ADDR' in file /arc/arm/cpu/arm926ejs/start.S Cannot find a work around Error 6: /drivers/spi/atmel_dataflash_spi.c:161: undefined reference to 'reset_timer_masked' Error 7: /drivers/spi/atmel_dataflash_spi.c:161: undefined reference to 'get_timer_masked' Why are these definitions removed in the 2010.12 build? B) Initially I was trying the u-boot-2010.09. I want to use the MII interface instead of RMII. so #undef ed RMII and #defined CONFIG_MII and CONFIG_CMD_MII The Ping to self as well as host does not function at all despite of correct settings. I tried with putting debug outputs in various functions called. Actually no data is sentout TXD0 - TXD3 and no activity on the TX_EN or EX_ER. At the end, I get ping failed; host xx.xx.xx.xx is not alive. Can anyone guide me regarding the further line of efforts. Thanks a lot in advance. Regards, Abhishek

1 0

[U-Boot] [PATCH][v1] Fix wrong CONFIG_SYS_MPC85xx_SERDES1_ADDR
by Prabhakar 17 Jan '11

17 Jan '11

CONFIG_SYS_MPC85xx_SERDES1_ADDR was defined wrong as CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET. It should be as CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES1_OFFSET. Signed-off-by: Prabhakar <prabhakar(a)freescale.com> --- Based of http://git.denx.de/u-boot.git (branch master) Top commit: commit c6b734f5aea2ba75caaa1929f7e649ecda8d2f31 Merge: 072f412 a972089 Author: Wolfgang Denk <wd(a)denx.de> Date: Wed Jan 12 23:59:53 2011 +0100 Merge branch 'master' of git://git.denx.de/u-boot-sh Changes for v1: Incorporated Wolfgang Denk's comments - Fixed header length to 74 - Rebased to http://git.denx.de/u-boot.git (branch master) arch/powerpc/include/asm/immap_85xx.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 30c64eb..6a2daf2 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2307,7 +2307,7 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_CPM_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET) #define CONFIG_SYS_MPC85xx_SERDES1_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES1_OFFSET) #define CONFIG_SYS_MPC85xx_SERDES2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) #define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \ -- 1.6.3.1

2 1