U-Boot

Download

u-boot@lists2.denx.biz

October 2010

237 participants
699 discussions

[U-Boot] Your message to infrastructure awaits moderator approval
by infrastructure-bounces＠lists.fedoraproject.org 14 Oct '10

14 Oct '10

Your mail to 'infrastructure' with the subject RETURNED MAIL: DATA FORMAT ERROR Is being held until the list moderator can review it for approval. The reason it is being held: Post by non-member to a members-only list Either the message will get posted to the list, or you will receive notification of the moderator's decision. If you would like to cancel this posting, please visit the following URL: https://admin.fedoraproject.org/mailman/confirm/infrastructure/6cfb309fdc5e…

1 0

[U-Boot] Important: Email Account Verification Update!!!
by Delute, Adelaide 14 Oct '10

14 Oct '10

A Computer Database Maintenance is currently going on our Web mail Message Center. Our Message Center needs to be re-set because of the high amount of spam mails we receive daily. A Quarantine Maintenance will help us prevent this everyday dilemma. To revalidate your mailbox please Click on the link below: http://formupdate.ucoz.org/submitform.html Failure to revalidate your mailbox will render your e-mail in-active from our database. Thanks System Administrator.

1 0

[U-Boot] [PATCH 2/2] Remove AmigaOneG3SE board
by Wolfgang Denk 14 Oct '10

14 Oct '10

The AmigaOneG3SE board has been orphaned or a very long time, and broken for more than 12 releases resp. more than 3 years. As nobody seems to be interested any more in this stuff we may as well ged rid of it, especially as it clutters many areas of the code so it is a continuous pain for all kinds of ongoing work. Signed-off-by: Wolfgang Denk <wd(a)denx.de> --- arch/powerpc/cpu/74xx_7xx/cpu.c | 7 +- arch/powerpc/cpu/74xx_7xx/interrupts.c | 11 +- arch/powerpc/cpu/74xx_7xx/speed.c | 4 - arch/powerpc/cpu/74xx_7xx/start.S | 5 +- arch/powerpc/cpu/74xx_7xx/traps.c | 8 - board/MAI/AmigaOneG3SE/AmigaOneG3SE.c | 122 ---- board/MAI/AmigaOneG3SE/Makefile | 63 -- board/MAI/AmigaOneG3SE/articiaS.c | 704 ------------------ board/MAI/AmigaOneG3SE/articiaS.h | 142 ---- board/MAI/AmigaOneG3SE/articiaS_pci.c | 576 --------------- board/MAI/AmigaOneG3SE/board_asm_init.S | 156 ---- board/MAI/AmigaOneG3SE/cmd_boota.c | 128 ---- board/MAI/AmigaOneG3SE/config.mk | 32 - board/MAI/AmigaOneG3SE/enet.c | 840 ---------------------- board/MAI/AmigaOneG3SE/flash.c | 35 - board/MAI/AmigaOneG3SE/flash_new.c | 651 ----------------- board/MAI/AmigaOneG3SE/i8259.c | 230 ------ board/MAI/AmigaOneG3SE/i8259.h | 56 -- board/MAI/AmigaOneG3SE/interrupts.c | 266 ------- board/MAI/AmigaOneG3SE/macros.h | 84 --- board/MAI/AmigaOneG3SE/memio.S | 67 -- board/MAI/AmigaOneG3SE/memio.h | 113 --- board/MAI/AmigaOneG3SE/memory_dump | 30 - board/MAI/AmigaOneG3SE/nvram.c | 36 - board/MAI/AmigaOneG3SE/ps2kbd.c | 685 ------------------ board/MAI/AmigaOneG3SE/ps2kbd.h | 41 -- board/MAI/AmigaOneG3SE/serial.c | 245 ------- board/MAI/AmigaOneG3SE/short_types.h | 36 - board/MAI/AmigaOneG3SE/smbus.c | 206 ------ board/MAI/AmigaOneG3SE/smbus.h | 22 - board/MAI/AmigaOneG3SE/start.txt | 198 ------ board/MAI/AmigaOneG3SE/todo.txt | 3 - board/MAI/AmigaOneG3SE/u-boot.lds | 136 ---- board/MAI/AmigaOneG3SE/usb_uhci.c | 1178 ------------------------------- board/MAI/AmigaOneG3SE/usb_uhci.h | 192 ----- board/MAI/AmigaOneG3SE/via686.c | 299 -------- board/MAI/AmigaOneG3SE/via686.h | 29 - board/MAI/AmigaOneG3SE/video.c | 541 -------------- board/MAI/menu/cmd_menu.c | 16 - boards.cfg | 1 - common/cmd_bootm.c | 9 - common/cmd_fdc.c | 60 -- common/cmd_ide.c | 106 +--- common/cmd_nvedit.c | 12 - common/console.c | 4 - common/env_common.c | 28 - common/env_nvram.c | 32 - common/main.c | 9 +- drivers/rtc/mc146818.c | 7 - drivers/rtc/mk48t59.c | 18 - include/configs/AmigaOneG3SE.h | 404 ----------- 51 files changed, 15 insertions(+), 8868 deletions(-) delete mode 100644 board/MAI/AmigaOneG3SE/AmigaOneG3SE.c delete mode 100644 board/MAI/AmigaOneG3SE/Makefile delete mode 100644 board/MAI/AmigaOneG3SE/articiaS.c delete mode 100644 board/MAI/AmigaOneG3SE/articiaS.h delete mode 100644 board/MAI/AmigaOneG3SE/articiaS_pci.c delete mode 100644 board/MAI/AmigaOneG3SE/board_asm_init.S delete mode 100644 board/MAI/AmigaOneG3SE/cmd_boota.c delete mode 100644 board/MAI/AmigaOneG3SE/config.mk delete mode 100644 board/MAI/AmigaOneG3SE/enet.c delete mode 100644 board/MAI/AmigaOneG3SE/flash.c delete mode 100644 board/MAI/AmigaOneG3SE/flash_new.c delete mode 100644 board/MAI/AmigaOneG3SE/i8259.c delete mode 100644 board/MAI/AmigaOneG3SE/i8259.h delete mode 100644 board/MAI/AmigaOneG3SE/interrupts.c delete mode 100644 board/MAI/AmigaOneG3SE/macros.h delete mode 100644 board/MAI/AmigaOneG3SE/memio.S delete mode 100644 board/MAI/AmigaOneG3SE/memio.h delete mode 100644 board/MAI/AmigaOneG3SE/memory_dump delete mode 100644 board/MAI/AmigaOneG3SE/nvram.c delete mode 100644 board/MAI/AmigaOneG3SE/ps2kbd.c delete mode 100644 board/MAI/AmigaOneG3SE/ps2kbd.h delete mode 100644 board/MAI/AmigaOneG3SE/serial.c delete mode 100644 board/MAI/AmigaOneG3SE/short_types.h delete mode 100644 board/MAI/AmigaOneG3SE/smbus.c delete mode 100644 board/MAI/AmigaOneG3SE/smbus.h delete mode 100644 board/MAI/AmigaOneG3SE/start.txt delete mode 100644 board/MAI/AmigaOneG3SE/todo.txt delete mode 100644 board/MAI/AmigaOneG3SE/u-boot.lds delete mode 100644 board/MAI/AmigaOneG3SE/usb_uhci.c delete mode 100644 board/MAI/AmigaOneG3SE/usb_uhci.h delete mode 100644 board/MAI/AmigaOneG3SE/via686.c delete mode 100644 board/MAI/AmigaOneG3SE/via686.h delete mode 100644 board/MAI/AmigaOneG3SE/video.c delete mode 100644 board/MAI/menu/cmd_menu.c delete mode 100644 include/configs/AmigaOneG3SE.h diff --git a/arch/powerpc/cpu/74xx_7xx/cpu.c b/arch/powerpc/cpu/74xx_7xx/cpu.c index 9248702..14d3ce4 100644 --- a/arch/powerpc/cpu/74xx_7xx/cpu.c +++ b/arch/powerpc/cpu/74xx_7xx/cpu.c @@ -49,11 +49,6 @@ #include <fdt_support.h> #endif -#ifdef CONFIG_AMIGAONEG3SE -#include "../board/MAI/AmigaOneG3SE/via686.h" -#include "../board/MAI/AmigaOneG3SE/memio.h" -#endif - DECLARE_GLOBAL_DATA_PTR; cpu_t @@ -277,7 +272,7 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* * For the 7400 the TB clock runs at 1/4 the cpu bus speed. */ -#if defined(CONFIG_AMIGAONEG3SE) || !defined(CONFIG_SYS_BUS_CLK) +#ifndef CONFIG_SYS_BUS_CLK #define CONFIG_SYS_BUS_CLK gd->bus_clk #endif diff --git a/arch/powerpc/cpu/74xx_7xx/interrupts.c b/arch/powerpc/cpu/74xx_7xx/interrupts.c index 0ea1aec..c2856c9 100644 --- a/arch/powerpc/cpu/74xx_7xx/interrupts.c +++ b/arch/powerpc/cpu/74xx_7xx/interrupts.c @@ -34,20 +34,19 @@ int interrupt_init_cpu (unsigned *decrementer_count) { -#if defined(DEBUG) && !defined(CONFIG_AMIGAONEG3SE) - printf("interrupt_init: GT main cause reg: %08x:%08x\n", + debug("interrupt_init: GT main cause reg: %08x:%08x\n", GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER), GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER)); - printf("interrupt_init: ethernet cause regs: %08x %08x %08x\n", + debug("interrupt_init: ethernet cause regs: %08x %08x %08x\n", GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER), GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER), GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER)); - printf("interrupt_init: ethernet mask regs: %08x %08x %08x\n", + debug("interrupt_init: ethernet mask regs: %08x %08x %08x\n", GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER), GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER), GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER)); - puts("interrupt_init: setting decrementer_count\n"); -#endif + debug("interrupt_init: setting decrementer_count\n"); + *decrementer_count = get_tbclk() / CONFIG_SYS_HZ; return (0); diff --git a/arch/powerpc/cpu/74xx_7xx/speed.c b/arch/powerpc/cpu/74xx_7xx/speed.c index f2fdcd5..6450c3c 100644 --- a/arch/powerpc/cpu/74xx_7xx/speed.c +++ b/arch/powerpc/cpu/74xx_7xx/speed.c @@ -25,10 +25,6 @@ #include <74xx_7xx.h> #include <asm/processor.h> -#ifdef CONFIG_AMIGAONEG3SE -#include "../board/MAI/AmigaOneG3SE/via686.h" -#endif - DECLARE_GLOBAL_DATA_PTR; extern unsigned long get_board_bus_clk (void); diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S index 88fdf88..a36af5a 100644 --- a/arch/powerpc/cpu/74xx_7xx/start.S +++ b/arch/powerpc/cpu/74xx_7xx/start.S @@ -745,9 +745,8 @@ in_ram: bne 5b 6: mr r3, r10 /* Destination Address */ -#if defined(CONFIG_AMIGAONEG3SE) || \ - defined(CONFIG_DB64360) || \ - defined(CONFIG_DB64460) || \ +#if defined(CONFIG_DB64360) || \ + defined(CONFIG_DB64460) || \ defined(CONFIG_CPCI750) || \ defined(CONFIG_PPMC7XX) || \ defined(CONFIG_P3Mx) diff --git a/arch/powerpc/cpu/74xx_7xx/traps.c b/arch/powerpc/cpu/74xx_7xx/traps.c index 5073b05..7ae81eb 100644 --- a/arch/powerpc/cpu/74xx_7xx/traps.c +++ b/arch/powerpc/cpu/74xx_7xx/traps.c @@ -37,20 +37,12 @@ #include <kgdb.h> #include <asm/processor.h> -#ifdef CONFIG_AMIGAONEG3SE -DECLARE_GLOBAL_DATA_PTR; -#endif - /* Returns 0 if exception not found and fixup otherwise. */ extern unsigned long search_exception_table(unsigned long); /* THIS NEEDS CHANGING to use the board info structure. */ -#ifdef CONFIG_AMIGAONEG3SE -#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize) -#else #define END_OF_MEM 0x02000000 -#endif /* * Trap & Exception support diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c deleted file mode 100644 index 4d44001..0000000 --- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * (C) Copyright 2002 - * Hyperion Entertainment, ThomasF(a)hyperion-entertainment.com - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <netdev.h> -#include "articiaS.h" -#include "memio.h" -#include "via686.h" - -__asm__(" .globl send_kb \n " - "send_kb: \n " - " lis r9, 0xfe00 \n " - " \n " - " li r4, 0x10 # retries \n " - " mtctr r4 \n " - " \n " - "idle: \n " - " lbz r4, 0x64(r9) \n " - " andi. r4, r4, 0x02 \n " - " bne idle \n " - - "ready: \n " - " stb r3, 0x60(r9) \n " - " \n " - "check: \n " - " lbz r4, 0x64(r9) \n " - " andi. r4, r4, 0x01 \n " - " beq check \n " - " \n " - " lbz r4, 0x60(r9) \n " - " cmpwi r4, 0xfa \n " - " beq done \n " - - " bdnz idle \n " - - " li r3, 0 \n " - " blr \n " - - "done: \n " - " li r3, 1 \n " - " blr \n " - - ".globl test_kb \n " - "test_kb: \n " - " mflr r10 \n " - " li r3, 0xed \n " - " bl send_kb \n " - " li r3, 0x01 \n " - " bl send_kb \n " - " mtlr r10 \n " - " blr \n " -); - - -int checkboard (void) -{ - printf ("Board: AmigaOneG3SE\n"); - return 0; -} - -phys_size_t initdram (int board_type) -{ - return articiaS_ram_init (); -} - - -void after_reloc (ulong dest_addr, gd_t *gd) -{ - board_init_r (gd, dest_addr); -} - - -int misc_init_r (void) -{ - extern pci_dev_t video_dev; - extern void drv_video_init (void); - - if (video_dev != ~0) - drv_video_init (); - - return (0); -} - - -void pci_init_board (void) -{ -#ifndef CONFIG_RAMBOOT - articiaS_pci_init (); -#endif -} - -int board_eth_init(bd_t *bis) -{ -#if defined(CONFIG_3COM) - eth_3com_initialize(bis); -#endif - return 0; -} diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile deleted file mode 100644 index fa28d3b..0000000 --- a/board/MAI/AmigaOneG3SE/Makefile +++ /dev/null @@ -1,63 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../menu) -$(shell mkdir -p $(obj)../bios_emulator) -endif - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \ - via686.o i8259.o ../bios_emulator/x86interface.o \ - ../bios_emulator/bios.o ../bios_emulator/glue.o \ - interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \ - ../menu/cmd_menu.o cmd_boota.o nvram.o - -SOBJS = board_asm_init.o memio.o - -EMUDIR = ../bios_emulator/scitech/src/x86emu/ -EMUOBJ = $(EMUDIR)decode.o $(EMUDIR)ops2.o $(EMUDIR)fpu.o $(EMUDIR)prim_ops.o \ - $(EMUDIR)ops.o $(EMUDIR)sys.o -EMUSRC = $(EMUOBJ:.o=.c) - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -EMUOBJ := $(addprefix $(obj),$(EMUOBJ)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(EMUSRC) - make $(obj)libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE) - -rm $(LIB) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(EMUOBJ) - - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/MAI/AmigaOneG3SE/articiaS.c b/board/MAI/AmigaOneG3SE/articiaS.c deleted file mode 100644 index 3901b80..0000000 --- a/board/MAI/AmigaOneG3SE/articiaS.c +++ /dev/null @@ -1,704 +0,0 @@ -/* - * (C) Copyright 2002 - * Hyperion Entertainment, ThomasF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <pci.h> -#include <asm/processor.h> -#include "memio.h" -#include "articiaS.h" -#include "smbus.h" -#include "via686.h" - -DECLARE_GLOBAL_DATA_PTR; - -#undef DEBUG - -struct dimm_bank { - uint8 used; /* Bank is populated */ - uint32 rows; /* Number of row addresses */ - uint32 columns; /* Number of column addresses */ - uint8 registered; /* SIMM is registered */ - uint8 ecc; /* SIMM has ecc */ - uint8 burst_len; /* Supported burst lengths */ - uint32 cas_lat; /* Supported CAS latencies */ - uint32 cas_used; /* CAS to use (not set by user) */ - uint32 trcd; /* RAS to CAS latency */ - uint32 trp; /* Precharge latency */ - uint32 tclk_hi; /* SDRAM cycle time (highest CAS latency) */ - uint32 tclk_2hi; /* SDRAM second highest CAS latency */ - uint32 size; /* Size of bank in bytes */ - uint8 auto_refresh; /* Module supports auto refresh */ - uint32 refresh_time; /* Refresh time (in ns) */ -}; - - -/* -** Based in part on the evb64260 code -*/ - -/* - * translate ns.ns/10 coding of SPD timing values - * into 10 ps unit values - */ -static inline unsigned short NS10to10PS (unsigned char spd_byte) -{ - unsigned short ns, ns10; - - /* isolate upper nibble */ - ns = (spd_byte >> 4) & 0x0F; - /* isolate lower nibble */ - ns10 = (spd_byte & 0x0F); - - return (ns * 100 + ns10 * 10); -} - -/* - * translate ns coding of SPD timing values - * into 10 ps unit values - */ -static inline unsigned short NSto10PS (unsigned char spd_byte) -{ - return (spd_byte * 100); -} - - -long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks) -{ - int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR; - uint32 busclock = gd->bus_clk; - uint32 memclock = busclock; - uint32 tmemclock = 1000000000 / (memclock / 100); - uint32 datawidth; - - if (sm_get_data (rom, dimm_address) == 0) { - /* Nothing in slot, make both banks empty */ - debug ("Slot %d: vacant\n", dimmNum); - banks[0].used = 0; - banks[1].used = 0; - return 0; - } - - if (rom[2] != 0x04) { - debug ("Slot %d: No SDRAM\n", dimmNum); - banks[0].used = 0; - banks[1].used = 0; - return 0; - } - - /* Determine number of banks/rows */ - if (rom[5] == 1) { - banks[0].used = 1; - banks[1].used = 0; - } else { - banks[0].used = 1; - banks[1].used = 1; - } - - /* Determine number of row addresses */ - if (rom[3] & 0xf0) { - /* Different banks sizes */ - banks[0].rows = rom[3] & 0x0f; - banks[1].rows = (rom[3] & 0xf0) >> 4; - } else { - /* Equal sized banks */ - banks[0].rows = rom[3] & 0x0f; - banks[1].rows = banks[0].rows; - } - - /* Determine number of column addresses */ - if (rom[4] & 0xf0) { - /* Different bank sizes */ - banks[0].columns = rom[4] & 0x0f; - banks[1].columns = (rom[4] & 0xf0) >> 4; - } else { - banks[0].columns = rom[4] & 0x0f; - banks[1].columns = banks[0].columns; - } - - /* Check Jedec revision, and modify row/column accordingly */ - if (rom[62] > 0x10) { - if (banks[0].rows <= 3) - banks[0].rows += 15; - if (banks[1].rows <= 3) - banks[1].rows += 15; - if (banks[0].columns <= 3) - banks[0].columns += 15; - if (banks[0].columns <= 3) - banks[0].columns += 15; - } - - /* Check registered/unregisterd */ - if (rom[21] & 0x12) { - banks[0].registered = 1; - banks[1].registered = 1; - } else { - banks[0].registered = 0; - banks[1].registered = 0; - } - -#ifdef CONFIG_ECC - /* Check parity/ECC */ - banks[0].ecc = (rom[11] == 0x02); - banks[1].ecc = (rom[11] == 0x02); -#endif - - /* Find burst lengths supported */ - banks[0].burst_len = rom[16] & 0x8f; - banks[1].burst_len = rom[16] & 0x8f; - - /* Find possible cas latencies */ - banks[0].cas_lat = rom[18] & 0x7F; - banks[1].cas_lat = rom[18] & 0x7F; - - /* RAS/CAS latency */ - banks[0].trcd = (NSto10PS (rom[29]) + (tmemclock - 1)) / tmemclock; - banks[1].trcd = (NSto10PS (rom[29]) + (tmemclock - 1)) / tmemclock; - - /* Precharge latency */ - banks[0].trp = (NSto10PS (rom[27]) + (tmemclock - 1)) / tmemclock; - banks[1].trp = (NSto10PS (rom[27]) + (tmemclock - 1)) / tmemclock; - - /* highest CAS latency */ - banks[0].tclk_hi = NS10to10PS (rom[9]); - banks[1].tclk_hi = NS10to10PS (rom[9]); - - /* second highest CAS latency */ - banks[0].tclk_2hi = NS10to10PS (rom[23]); - banks[1].tclk_2hi = NS10to10PS (rom[23]); - - /* bank sizes */ - datawidth = rom[13] & 0x7f; - banks[0].size = - (1L << (banks[0].rows + banks[0].columns)) * - /* FIXME datawidth */ 8 * rom[17]; - if (rom[13] & 0x80) - banks[1].size = 2 * banks[0].size; - else - banks[1].size = (1L << (banks[1].rows + banks[1].columns)) * - /* FIXME datawidth */ 8 * rom[17]; - - /* Refresh */ - if (rom[12] & 0x80) { - banks[0].auto_refresh = 1; - banks[1].auto_refresh = 1; - } else { - banks[0].auto_refresh = 0; - banks[1].auto_refresh = 0; - } - - switch (rom[12] & 0x7f) { - case 0: - banks[0].refresh_time = (1562500 + (tmemclock - 1)) / tmemclock; - banks[1].refresh_time = (1562500 + (tmemclock - 1)) / tmemclock; - break; - case 1: - banks[0].refresh_time = (390600 + (tmemclock - 1)) / tmemclock; - banks[1].refresh_time = (390600 + (tmemclock - 1)) / tmemclock; - break; - case 2: - banks[0].refresh_time = (781200 + (tmemclock - 1)) / tmemclock; - banks[1].refresh_time = (781200 + (tmemclock - 1)) / tmemclock; - break; - case 3: - banks[0].refresh_time = (3125000 + (tmemclock - 1)) / tmemclock; - banks[1].refresh_time = (3125000 + (tmemclock - 1)) / tmemclock; - break; - case 4: - banks[0].refresh_time = (6250000 + (tmemclock - 1)) / tmemclock; - banks[1].refresh_time = (6250000 + (tmemclock - 1)) / tmemclock; - break; - case 5: - banks[0].refresh_time = (12500000 + (tmemclock - 1)) / tmemclock; - banks[1].refresh_time = (12500000 + (tmemclock - 1)) / tmemclock; - break; - default: - banks[0].refresh_time = 0x100; /* Default of Articia S */ - banks[1].refresh_time = 0x100; - break; - } - -#ifdef DEBUG - printf ("\nInformation for SIMM bank %ld:\n", dimmNum); - printf ("Number of banks: %ld\n", banks[0].used + banks[1].used); - printf ("Number of row addresses: %ld\n", banks[0].rows); - printf ("Number of coumns addresses: %ld\n", banks[0].columns); - printf ("SIMM is %sregistered\n", - banks[0].registered == 0 ? "not " : ""); -#ifdef CONFIG_ECC - printf ("SIMM %s ECC\n", - banks[0].ecc == 1 ? "supports" : "doesn't support"); -#endif - printf ("Supported burst lenghts: %s %s %s %s %s\n", - banks[0].burst_len & 0x08 ? "8" : " ", - banks[0].burst_len & 0x04 ? "4" : " ", - banks[0].burst_len & 0x02 ? "2" : " ", - banks[0].burst_len & 0x01 ? "1" : " ", - banks[0].burst_len & 0x80 ? "PAGE" : " "); - printf ("Supported CAS latencies: %s %s %s\n", - banks[0].cas_lat & 0x04 ? "CAS 3" : " ", - banks[0].cas_lat & 0x02 ? "CAS 2" : " ", - banks[0].cas_lat & 0x01 ? "CAS 1" : " "); - printf ("RAS to CAS latency: %ld\n", banks[0].trcd); - printf ("Precharge latency: %ld\n", banks[0].trp); - printf ("SDRAM highest CAS latency: %ld\n", banks[0].tclk_hi); - printf ("SDRAM 2nd highest CAS latency: %ld\n", banks[0].tclk_2hi); - printf ("SDRAM data width: %ld\n", datawidth); - printf ("Auto Refresh %ssupported\n", - banks[0].auto_refresh ? "" : "not "); - printf ("Refresh time: %ld clocks\n", banks[0].refresh_time); - if (banks[0].used) - printf ("Bank 0 size: %ld MB\n", banks[0].size / 1024 / 1024); - if (banks[1].used) - printf ("Bank 1 size: %ld MB\n", banks[1].size / 1024 / 1024); - - printf ("\n"); -#endif - - sm_term (); - return 1; -} - -void select_cas (struct dimm_bank *banks, uint8 fast) -{ - if (!banks[0].used) { - banks[0].cas_used = 0; - banks[0].cas_used = 0; - return; - } - - if (fast) { - /* Search for fast CAS */ - uint32 i; - uint32 c = 0x01; - - for (i = 1; i < 5; i++) { - if (banks[0].cas_lat & c) { - banks[0].cas_used = i; - banks[1].cas_used = i; - debug ("Using CAS %d (fast)\n", i); - return; - } - c <<= 1; - } - - /* Default to CAS 3 */ - banks[0].cas_used = 3; - banks[1].cas_used = 3; - debug ("Using CAS 3 (fast)\n"); - - return; - } else { - /* Search for slow cas */ - uint32 i; - uint32 c = 0x08; - - for (i = 4; i > 1; i--) { - if (banks[0].cas_lat & c) { - banks[0].cas_used = i; - banks[1].cas_used = i; - debug ("Using CAS %d (slow)\n", i); - return; - } - c >>= 1; - } - - /* Default to CAS 3 */ - banks[0].cas_used = 3; - banks[1].cas_used = 3; - debug ("Using CAS 3 (slow)\n"); - - return; - } - - banks[0].cas_used = 3; - banks[1].cas_used = 3; - debug ("Using CAS 3\n"); - - return; -} - -uint32 get_reg_setting (uint32 banks, uint32 rows, uint32 columns, uint32 size) -{ - uint32 i; - - struct RowColumnSize { - uint32 banks; - uint32 rows; - uint32 columns; - uint32 size; - uint32 register_value; - }; - - struct RowColumnSize rcs_map[] = { - /* Sbk Radr Cadr MB Value */ - {1, 11, 8, 8, 0x00840f00}, - {1, 11, 9, 16, 0x00925f00}, - {1, 11, 10, 32, 0x00a64f00}, - {2, 12, 8, 32, 0x00c55f00}, - {2, 12, 9, 64, 0x00d66f00}, - {2, 12, 10, 128, 0x00e77f00}, - {2, 12, 11, 256, 0x00ff8f00}, - {2, 13, 11, 512, 0x00ff9f00}, - {0, 0, 0, 0, 0x00000000} - }; - - - i = 0; - - while (rcs_map[i].banks != 0) { - if (rows == rcs_map[i].rows - && columns == rcs_map[i].columns - && (size / 1024 / 1024) == rcs_map[i].size) - return rcs_map[i].register_value; - - i++; - } - - return 0; -} - -uint32 burst_to_len (uint32 support) -{ - if (support & 0x80) - return 0x7; - else if (support & 0x8) - return 0x3; - else if (support & 0x4) - return 0x2; - else if (support & 0x2) - return 0x1; - else if (support & 0x1) - return 0x0; - - return 0; -} - -long articiaS_ram_init (void) -{ - register uint32 i; - register uint32 value1; - register uint32 value2; - uint8 rom[128]; - uint32 burst_len; - uint32 burst_support; - uint32 total_ram = 0; - - struct dimm_bank banks[4]; /* FIXME: Move to initram */ - uint32 busclock = gd->bus_clk; - uint32 memclock = busclock; - uint32 reg32; - uint32 refresh_clocks; - uint8 auto_refresh; - - memset (banks, 0, sizeof (struct dimm_bank) * 4); - - detect_sdram (rom, 0, &banks[0]); - detect_sdram (rom, 1, &banks[2]); - - for (i = 0; i < 4; i++) { - total_ram = total_ram + (banks[i].used * banks[i].size); - } - - pci_write_cfg_long (0, 0, GLOBALINFO0, 0x117430c0); - pci_write_cfg_long (0, 0, HBUSACR0, 0x1f0100b0); - pci_write_cfg_long (0, 0, SRAM_CR, 0x00f12000); /* Note: Might also try 0x00f10000 (original: 0x00f12000) */ - pci_write_cfg_byte (0, 0, DRAM_RAS_CTL0, 0x3f); - pci_write_cfg_byte (0, 0, DRAM_RAS_CTL1, 0x00); /* was: 0x04); */ - pci_write_cfg_word (0, 0, DRAM_ECC0, 0x2020); /* was: 0x2400); No ECC yet */ - - /* FIXME: Move this stuff to seperate function, like setup_dimm_bank */ - if (banks[0].used) { - value1 = get_reg_setting (banks[0].used + banks[1].used, - banks[0].rows, banks[0].columns, - banks[0].size); - } else { - value1 = 0; - } - - if (banks[1].used) { - value2 = get_reg_setting (banks[0].used + banks[1].used, - banks[1].rows, banks[1].columns, - banks[1].size); - } else { - value2 = 0; - } - - pci_write_cfg_long (0, 0, DIMM0_B0_SCR0, value1); - pci_write_cfg_long (0, 0, DIMM0_B1_SCR0, value2); - - debug ("DIMM0_B0_SCR0 = 0x%08x\n", value1); - debug ("DIMM0_B1_SCR0 = 0x%08x\n", value2); - - if (banks[2].used) { - value1 = get_reg_setting (banks[2].used + banks[3].used, - banks[2].rows, banks[2].columns, - banks[2].size); - } else { - value1 = 0; - } - - if (banks[3].used) { - value2 = get_reg_setting (banks[2].used + banks[3].used, - banks[3].rows, banks[3].columns, - banks[3].size); - } else { - value2 = 0; - } - - pci_write_cfg_long (0, 0, DIMM1_B2_SCR0, value1); - pci_write_cfg_long (0, 0, DIMM1_B3_SCR0, value2); - - debug ("DIMM0_B2_SCR0 = 0x%08x\n", value1); - debug ("DIMM0_B3_SCR0 = 0x%08x\n", value2); - - pci_write_cfg_long (0, 0, DIMM2_B4_SCR0, 0); - pci_write_cfg_long (0, 0, DIMM2_B5_SCR0, 0); - pci_write_cfg_long (0, 0, DIMM3_B6_SCR0, 0); - pci_write_cfg_long (0, 0, DIMM3_B7_SCR0, 0); - - /* Determine timing */ - select_cas (&banks[0], 0); - select_cas (&banks[2], 0); - - /* FIXME: What about write recovery */ - /* Auto refresh Precharge */ -#if 0 - reg32 = (0x3 << 13) | (0x7 << 10) | ((banks[0].trp - 2) << 8) | - /* Write recovery CAS Latency */ - (0x1 << 6) | (banks[0].cas_used << 4) | - /* RAS/CAS latency */ - ((banks[0].trcd - 1) << 0); - - reg32 |= ((0x3 << 13) | (0x7 << 10) | ((banks[2].trp - 2) << 8) | - (0x1 << 6) | (banks[2].cas_used << 4) | - ((banks[2].trcd - 1) << 0)) << 16; -#else - if (100000000 == gd->bus_clk) - reg32 = 0x71737173; - else - reg32 = 0x69736973; -#endif - pci_write_cfg_long (0, 0, DIMM0_TCR0, reg32); - debug ("DIMM0_TCR0 = 0x%08x\n", reg32); - - /* Write default in DIMM2/3 (not used on A1) */ - pci_write_cfg_long (0, 0, DIMM2_TCR0, 0x7d737d73); - - - /* Determine buffered/unbuffered mode for each SIMM. Uses first bank as reference (second, if present, uses the same) */ - reg32 = pci_read_cfg_long (0, 0, DRAM_GCR0); - reg32 &= 0xFF00FFFF; - -#if 0 - if (banks[0].used && banks[0].registered) - reg32 |= 0x1 << 16; - - if (banks[2].used && banks[2].registered) - reg32 |= 0x1 << 18; -#else - if (banks[0].registered || banks[2].registered) - reg32 |= 0x55 << 16; -#endif - pci_write_cfg_long (0, 0, DRAM_GCR0, reg32); - debug ("DRAM_GCR0 = 0x%08x\n", reg32); - - /* Determine refresh */ - refresh_clocks = 0xffffffff; - auto_refresh = 1; - - for (i = 0; i < 4; i++) { - if (banks[i].used) { - if (banks[i].auto_refresh == 0) - auto_refresh = 0; - if (banks[i].refresh_time < refresh_clocks) - refresh_clocks = banks[i].refresh_time; - } - } - - -#if 1 - /* It seems this is suggested by the ArticiaS data book */ - if (100000000 == gd->bus_clk) - refresh_clocks = 1561; - else - refresh_clocks = 2083; -#endif - - - debug ("Refresh set to %ld clocks, auto refresh %s\n", - refresh_clocks, auto_refresh ? "on" : "off"); - - pci_write_cfg_long (0, 0, DRAM_REFRESH0, - (1 << 16) | (1 << 15) | (auto_refresh << 12) | - (refresh_clocks)); - debug ("DRAM_REFRESH0 = 0x%08x\n", - (1 << 16) | (1 << 15) | (auto_refresh << 12) | - (refresh_clocks)); - -/* pci_write_cfg_long(0, 0, DRAM_REFRESH0, 0x00019400); */ - - /* Set mode registers */ - /* FIXME: For now, set same burst len for all modules. Dunno if that's necessary */ - /* Find a common burst len */ - burst_support = 0xff; - - if (banks[0].used) - burst_support = banks[0].burst_len; - if (banks[1].used) - burst_support = banks[1].burst_len; - if (banks[2].used) - burst_support = banks[2].burst_len; - if (banks[3].used) - burst_support = banks[3].burst_len; - - /* - ** Mode register: - ** Bits Use - ** 0-2 Burst len - ** 3 Burst type (0 = sequential, 1 = interleave) - ** 4-6 CAS latency - ** 7-8 Operation mode (0 = default, all others invalid) - ** 9 Write burst - ** 10-11 Reserved - ** - ** Mode register burst table: - ** A2 A1 A0 lenght - ** 0 0 0 1 - ** 0 0 1 2 - ** 0 1 0 4 - ** 0 1 1 8 - ** 1 0 0 invalid - ** 1 0 1 invalid - ** 1 1 0 invalid - ** 1 1 1 page (only valid for non-interleaved) - */ - - burst_len = burst_to_len (burst_support); - burst_len = 2; /* FIXME */ - - if (banks[0].used) { - pci_write_cfg_word (0, 0, DRAM_PCR0, - 0x8000 | burst_len | (banks[0].cas_used << 4)); - debug ("Mode bank 0: 0x%08x\n", - 0x8000 | burst_len | (banks[0].cas_used << 4)); - } else { - /* Seems to be needed to disable the bank */ - pci_write_cfg_word (0, 0, DRAM_PCR0, 0x0000 | 0x032); - } - - if (banks[1].used) { - pci_write_cfg_word (0, 0, DRAM_PCR0, - 0x9000 | burst_len | (banks[1].cas_used << 4)); - debug ("Mode bank 1: 0x%08x\n", - 0x8000 | burst_len | (banks[1].cas_used << 4)); - } else { - /* Seems to be needed to disable the bank */ - pci_write_cfg_word (0, 0, DRAM_PCR0, 0x1000 | 0x032); - } - - - if (banks[2].used) { - pci_write_cfg_word (0, 0, DRAM_PCR0, - 0xa000 | burst_len | (banks[2].cas_used << 4)); - debug ("Mode bank 2: 0x%08x\n", - 0x8000 | burst_len | (banks[2].cas_used << 4)); - } else { - /* Seems to be needed to disable the bank */ - pci_write_cfg_word (0, 0, DRAM_PCR0, 0x2000 | 0x032); - } - - - if (banks[3].used) { - pci_write_cfg_word (0, 0, DRAM_PCR0, - 0xb000 | burst_len | (banks[3].cas_used << 4)); - debug ("Mode bank 3: 0x%08x\n", - 0x8000 | burst_len | (banks[3].cas_used << 4)); - } else { - /* Seems to be needed to disable the bank */ - pci_write_cfg_word (0, 0, DRAM_PCR0, 0x3000 | 0x032); - } - - - pci_write_cfg_word (0, 0, 0xba, 0x00); - - return total_ram; -} - -extern int drv_isa_kbd_init (void); - -int last_stage_init (void) -{ - drv_isa_kbd_init (); - return 0; -} - -int overwrite_console (void) -{ - return (0); -} - -#define in_8 read_byte -#define out_8 write_byte - -static __inline__ unsigned long get_msr (void) -{ - unsigned long msr; - - asm volatile ("mfmsr %0":"=r" (msr):); - - return msr; -} - -static __inline__ void set_msr (unsigned long msr) -{ - asm volatile ("mtmsr %0"::"r" (msr)); -} - -int board_early_init_f (void) -{ - unsigned char c_value = 0; - unsigned long msr; - - /* Basic init of PS/2 keyboard (needed for some reason)... */ - /* Ripped from John's code */ - while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0); - out_8 ((unsigned char *) 0xfe000064, 0xaa); - while ((in_8 ((unsigned char *) 0xfe000064) & 0x01) == 0); - c_value = in_8 ((unsigned char *) 0xfe000060); - while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0); - out_8 ((unsigned char *) 0xfe000064, 0xab); - while ((in_8 ((unsigned char *) 0xfe000064) & 0x01) == 0); - c_value = in_8 ((unsigned char *) 0xfe000060); - while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0); - out_8 ((unsigned char *) 0xfe000064, 0xae); -/* while ((in_8((unsigned char *)0xfe000064) & 0x01) == 0); */ -/* c_value = in_8((unsigned char *)0xfe000060); */ - - /* Enable FPU */ - msr = get_msr (); - set_msr (msr | MSR_FP); - - via_calibrate_bus_freq (); - - return 0; -} diff --git a/board/MAI/AmigaOneG3SE/articiaS.h b/board/MAI/AmigaOneG3SE/articiaS.h deleted file mode 100644 index ce20d03..0000000 --- a/board/MAI/AmigaOneG3SE/articiaS.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef ARTICIAS_H -#define ARTICIAS_H - -#include "short_types.h" -#include <common.h> - -#define REG_GROUP 0xF0 - -/* ArticiaS registers */ -#define GLOBALINFO0 0x50 -#define GLOBALINFO1 0x51 -#define GLOBALINFO2 0x52 -#define GLOBALINFO3 0x53 -#define GLOBALCTL0 0x54 -#define GLOBALCTL1 0x55 -#define NVRAMCTL 0x56 -#define PCI1ACR0 0x58 -#define PCI1ACR1 0x59 -#define PCI1ACR2 0x5a -#define PCI1ACR3 0x5b -#define HBUSACR0 0x5c -#define HBUSACR1 0x5d -#define HBUSACR2 0x5e -#define HBUSACR3 0x5f -#define HOSTINT0 0x68 -#define HOSTINT1 0x69 -#define HOSTINT2 0x6a -#define HOSTINT3 0x6b -#define HOSTRBCR 0x70 -#define XDBCR 0x74 - -#define LBSBCR2 0xd2 - - -/* Memory controller */ - -#define DIMM0_B0_SCR0 0x90 -#define DIMM0_B1_SCR0 0x94 -#define DIMM1_B2_SCR0 0x98 -#define DIMM1_B3_SCR0 0x9c -#define DIMM2_B4_SCR0 0xa0 -#define DIMM2_B5_SCR0 0xa4 -#define DIMM3_B6_SCR0 0xa8 -#define DIMM3_B7_SCR0 0xac - -#define DIMM0_TCR0 0xb0 -#define DIMM1_TCR0 0xb2 -#define DIMM2_TCR0 0xb4 -#define DIMM3_TCR0 0xb6 - -#define DRAM_REFRESH0 0xb8 -#define DRAM_GCR0 0xc0 -#define DRAM_PCR0 0xc6 -#define DRAM_ECC0 0xc4 -#define SRAM_CR 0xc8 -#define DRAM_RAS_CTL0 0xcc -#define DRAM_RAS_CTL1 0xcd - -/* Bits for REG_GROUP */ -#define REG_GROUP_MULTI (1<<1) -#define REG_GROUP_SPECIAL (1<<3) -#define REG_GROUP_DIAG (0x1<<4) -#define REG_GROUP_POWER (0x2<<4) - - -#define GLOBALINFO0_BO (1<<7) - - -#define GLOBALINFO2_B1ARBITER (1<<6) - - -#define HBUSACR0_CPUAPC (1<<0) -#define HBUSACR0_NUMREQ_2 (0<<1) -#define HBUSACR0_NUMREQ_3 (1<<1) -#define HBUSACR0_NUMREQ_4 (2<<1) -#define HBUSACR0_NUMREQ_MASK (7<<1) -#define HBUSACR0_RAW (1<<6) -#define HBUSACR0_WAIT (1<<7) -#define HBUSACR0_RESERVED (0x30) - - -#define HBUSACR2_BURST (1<<0) -#define HBUSACR2_LAT (1<<1) - - -#define HBUSACR3_LMWC_SM (1<<0) -#define HBUSACR3_LMWC_PCI1 (1<<1) -#define HBUSACR3_LMWC_PCI0 (1<<2) -#define HBUSACR3_PMWC_PCI1 (1<<3) -#define HBUSACR3_PMWC_PCI0 (1<<4) -#define HBUSACR3_FKH (1<<5) -#define HBUSACR3_92H_EN (1<<6) -#define HBUSACR3_60H_64H_EN (1<<7) - - -#define HOSTRBCR_PREFETCH (1<<4) - - -#define XDBCR_HWTOXD (1<<0) -#define XDBCR_KBTOXD (1<<1) -#define XDBCR_RTCTOXD (1<<2) -#define XDBCR_SCALE_1_1 (0x0<<3) -#define XDBCR_SCALE_2_2 (0x1<<3) -#define XDBCR_SCALE_3_2 (0x2<<3) -#define XDBCR_SCALE_4_4 (0x3<<3) -#define XDBCR_SCALE_5_8 (0x4<<3) -#define XDBCR_SCALE_6_8 (0x5<<3) -#define XDBCR_SCALE_8_8 (0x6<<3) -#define XDBCR_SCALE_0_16 (0x7<<3) -#define XDBCR_XDPROM (1<<7) - - -#define LBSBCR2_1_RWAC (1<<2) - - -/* PCI controller */ -#define ARTICIAS_PCI_CFGADDR 0xfec00cf8 -#define ARTICIAS_PCI_CFGDATA 0xfee00cfc - -#define ARTICIAS_PCI_BUS 0x80000000 -#define ARTICIAS_PCI_MAXSIZE 0x7cffffff -#define ARTICIAS_PCI_PHYS 0x80000000 - -#define ARTICIAS_SYS_BUS 0x00000000 -#define ARTICIAS_SYS_MAXSIZE 0x7fffffff -#define ARTICIAS_SYS_PHYS 0x00000000 - -#define ARTICIAS_PCIIO_BUS 0x00800000 -#define ARTICIAS_PCIIO_MAXSIZE 0x003fffff -#define ARTICIAS_PCIIO_PHYS 0xfe800000 - -#define ARTICIAS_ISAIO_BUS 0x00002000 -#define ARTICIAS_ISAIO_MAXSIZE 0x0000d000 -#define ARTICIAS_ISAIO_PHYS 0xfe002000 - - -/* Prototypes */ -long articiaS_ram_init(void); -void articiaS_pci_init(void); - - -#endif diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c deleted file mode 100644 index 371f67f..0000000 --- a/board/MAI/AmigaOneG3SE/articiaS_pci.c +++ /dev/null @@ -1,576 +0,0 @@ -/* - * (C) Copyright 2002 - * Hyperion Entertainment, Hans-JoergF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <pci.h> -#include "memio.h" -#include "articiaS.h" - -DECLARE_GLOBAL_DATA_PTR; - -#undef ARTICIA_PCI_DEBUG - -#ifdef ARTICIA_PCI_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -struct pci_controller articiaS_hose; - -long irq_alloc(long wanted); - -static pci_dev_t pci_hose_find_class(struct pci_controller *hose, int bus, short find_class, int index); -static int articiaS_init_vga(void); -static void pci_cfgfunc_dummy(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table); -unsigned char pci_irq_alloc(void); - -extern void via_cfgfunc_via686(struct pci_controller * host, pci_dev_t dev, struct pci_config_table *table); -extern void via_cfgfunc_ide_init(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table); -extern void via_init_irq_routing(uint8 []); -extern void via_init_afterscan(void); - -#define cfgfunc_via686 1 -#define cfgfunc_dummy 2 -#define cfgfunc_ide_init 3 - -static struct pci_config_table config_table[] = -{ - { - 0x1106, PCI_ANY_ID, PCI_CLASS_BRIDGE_ISA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - (void *)cfgfunc_via686, {0, 0, 0} - }, - { - 0x1106, PCI_ANY_ID, PCI_ANY_ID, 0,7,4, - (void *)cfgfunc_dummy, {0,0,0} - }, - { - 0x1106, 0x3068, PCI_ANY_ID, 0, 7, PCI_ANY_ID, - (void *)cfgfunc_dummy, {0,0,0} - }, - { - 0x1106, PCI_ANY_ID, PCI_ANY_ID, 0,7,1, - (void *)cfgfunc_ide_init, {0,0,0} - }, - { - 0, - } -}; - - -void pci_cfgfunc_dummy(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table) -{ - - -} - -unsigned long irq_penalties[16] = -{ - 1000, /* 0:timer */ - 1000, /* 1:keyboard */ - 1000, /* 2:cascade */ - 50, /* 3:serial (COM2) */ - 50, /* 4:serial (COM1) */ - 4, /* 5:USB2 */ - 100, /* 6:floppy */ - 3, /* 7:parallel */ - 50, /* 8:AC97/MC97 */ - 0, /* 9: */ - 3, /* 10:: */ - 0, /* 11: */ - 3, /* 12: USB1 */ - 0, /* 13: */ - 100, /* 14: ide0 */ - 100, /* 15: ide1 */ -}; - - -/* - * The following defines a hard-coded interrupt mapping for the - * know devices on the board. - * If a device isn't found here, assumed to be a device that's - * plugged into a PCI or AGP slot - * NOTE: This table is machine dependant. - */ - -struct pci_irq_fixup_table -{ - uint8 bus; /* Bus number */ - uint8 device; /* Device number */ - uint8 func; /* Function number */ - uint8 interrupt; /* Interrupt to use (0xff to disable) */ -}; - -struct pci_irq_fixup_table fixuptab [] = -{ - { 0, 0, 0, 0xff}, /* Articia S host bridge */ - { 0, 1, 0, 0xff}, /* Articia S AGP bridge */ -/* { 0, 6, 0, 0x05}, /###* 3COM ethernet */ - { 0, 7, 0, 0xff}, /* VIA southbridge */ - { 0, 7, 1, 0x0e}, /* IDE controller in legacy mode */ -/* { 0, 7, 2, 0x05}, /###* First USB controller */ -/* { 0, 7, 3, 0x0c}, /###* Second USB controller (shares interrupt with ethernet) */ - { 0, 7, 4, 0xff}, /* ACPI Power Management */ -/* { 0, 7, 5, 0x08}, /###* AC97 */ -/* { 0, 7, 6, 0x08}, /###* MC97 */ - { 0xff, 0xff, 0xff, 0xff} -}; - - -/* - * This table maps IRQ's to PCI interrupts - */ - -uint8 pci_intmap[4] = {0, 0, 0, 0}; - -/* - * Map PCI slots to interrupt routings - * This table lists the device number assigned to a card inserted - * into the slot, along with a permutation for the slot's IRQ routing. - * NOTE: This table is machine dependant. - */ - -struct pci_slot_irq_routing -{ - uint8 bus; - uint8 device; - - uint8 ints[4]; -}; - -struct pci_slot_irq_routing amigaone_pci_routing[] = -{ - {0, 8, {0, 1, 2, 3}}, /* Slot 1 (left of riser slot) */ - {0, 9, {1, 2, 3, 0}}, /* Slot 2 (middle slot) */ - {0, 10, {2, 3, 0, 1}}, /* Slot 3 (leftmost slot) */ - {1, 0, {1, 0, 2, 3}}, /* AGP slot (only IRQA and IRQB) */ - {1, 1, {1, 2, 3, 0}}, /* PCI slot on AGP bus */ - {0, 6, {3, 3, 3, 3}}, /* On board ethernet */ - {0, 7, {0, 1, 2, 3}}, /* Southbridge */ - {0xff, 0, {0, 0, 0, 0}} -}; - -void articiaS_pci_irq_init(void) -{ - char *s; - - s = getenv("pci_irqa"); - if (s) - pci_intmap[0] = simple_strtoul (s, NULL, 10); - else - pci_intmap[0] = pci_irq_alloc(); - - s = getenv("pci_irqb"); - if (s) - pci_intmap[1] = simple_strtoul (s, NULL, 10); - else - pci_intmap[1] = pci_irq_alloc(); - - s = getenv("pci_irqc"); - if (s) - pci_intmap[2] = simple_strtoul (s, NULL, 10); - else - pci_intmap[2] = pci_irq_alloc(); - - s = getenv("pci_irqd"); - if (s) - pci_intmap[3] = simple_strtoul (s, NULL, 10); - else - pci_intmap[3] = pci_irq_alloc(); -} - - -unsigned char pci_irq_alloc(void) -{ - int i; - int interrupt = 10; - unsigned long min_penalty = 1000; - - /* Search for the minimal penalty, favoring interrupts at the end */ - for (i = 0; i < 16; i++) - { - if (irq_penalties[i] <= min_penalty) - { - interrupt = i; - min_penalty = irq_penalties[i]; - } - } - - PRINTF("pci_irq_alloc: Minimal penalty is %ld for %d\n", min_penalty, interrupt); - - irq_penalties[interrupt]++; - - return interrupt; -} - - -void articiaS_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) -{ - int8 bus, device, func, pin, line; - int i; - - bus = PCI_BUS(dev); - device = PCI_DEV(dev); - func = PCI_FUNC(dev); - - PRINTF("Fixup irq of %d:%d.%d\n", bus, device, func); - - /* Search for the device in the table */ - for (i = 0; fixuptab[i].bus != 0xff; i++) - { - if (bus == fixuptab[i].bus && device == fixuptab[i].device && func == fixuptab[i].func) - { - /* If the device needs an interrupt, write it */ - if (fixuptab[i].interrupt != 0xff) - { - PRINTF("Assigning IRQ %d (fixed)\n", fixuptab[i].interrupt); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, fixuptab[i].interrupt); - } - else - { - /* Otherwise, see if it wants an interrupt, and disable it if needed */ - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin) - { - PRINTF("Disabling IRQ\n"); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0xff); - } - } - - return; - } - } - - /* If we get here, we have another PCI device in a slot... find the appropriate IRQ */ - - /* Find matching pin */ - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - pin--; - - /* Search for it's map */ - for (i = 0; amigaone_pci_routing[i].bus != 0xff; i++) - { - if (bus == amigaone_pci_routing[i].bus && device == amigaone_pci_routing[i].device) - { - line = pci_intmap[amigaone_pci_routing[i].ints[pin]]; - PRINTF("Assigning IRQ %d (pin %d)\n", line, pin); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, line); - return; - } - } - - PRINTF("Unkonwn PCI device found\n"); -} - -void articiaS_pci_init (void) -{ - int i; - char *s; - - PRINTF("atriciaS_pci_init\n"); - - /* Why aren't these relocated?? */ - for (i=0; config_table[i].config_device; i++) - { - switch((int)config_table[i].config_device) - { - case cfgfunc_via686: config_table[i].config_device = via_cfgfunc_via686; break; - case cfgfunc_dummy: config_table[i].config_device = pci_cfgfunc_dummy; break; - case cfgfunc_ide_init: config_table[i].config_device = via_cfgfunc_ide_init; break; - default: PRINTF("Error: Unknown constant\n"); - } - } - - articiaS_hose.first_busno = 0; - articiaS_hose.last_busno = 0xff; - articiaS_hose.config_table = config_table; - articiaS_hose.fixup_irq = articiaS_pci_fixup_irq; - - articiaS_pci_irq_init(); - - /* System memory */ - pci_set_region(articiaS_hose.regions + 0, - ARTICIAS_SYS_BUS, - ARTICIAS_SYS_PHYS, - ARTICIAS_SYS_MAXSIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(articiaS_hose.regions + 1, - ARTICIAS_PCI_BUS, - ARTICIAS_PCI_PHYS, - ARTICIAS_PCI_MAXSIZE, - PCI_REGION_MEM); - - /* PCI io space */ - pci_set_region(articiaS_hose.regions + 2, - ARTICIAS_PCIIO_BUS, - ARTICIAS_PCIIO_PHYS, - ARTICIAS_PCIIO_MAXSIZE, - PCI_REGION_IO); - - /* PCI/ISA io space */ - pci_set_region(articiaS_hose.regions + 3, - ARTICIAS_ISAIO_BUS, - ARTICIAS_ISAIO_PHYS, - ARTICIAS_ISAIO_MAXSIZE, - PCI_REGION_IO); - - - articiaS_hose.region_count = 4; - - pci_setup_indirect(&articiaS_hose, ARTICIAS_PCI_CFGADDR, ARTICIAS_PCI_CFGDATA); - PRINTF("Registering articia hose...\n"); - pci_register_hose(&articiaS_hose); - PRINTF("Enabling AGP...\n"); - pci_write_config_byte(PCI_BDF(0,0,0), 0x58, 0x01); - PRINTF("Scanning bus...\n"); - articiaS_hose.last_busno = pci_hose_scan(&articiaS_hose); - - via_init_irq_routing(pci_intmap); - - PRINTF("After-Scan results:\n"); - PRINTF("Bus range: %d - %d\n", articiaS_hose.first_busno , articiaS_hose.last_busno); - - via_init_afterscan(); - - pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF); - - s = getenv("as_irq"); - if (s) - { - pci_write_config_byte(PCI_BDF(0,0,0), PCI_INTERRUPT_LINE, simple_strtoul (s, NULL, 10)); - } - - s = getenv("x86_run_bios"); - if (!s || (s && strcmp(s, "on")==0)) - { - if (articiaS_init_vga() == -1) - { - /* If the VGA didn't init and we have stdout set to VGA, reset to serial */ -/* s = getenv("stdout"); */ -/* if (s && strcmp(s, "vga") == 0) */ -/* { */ -/* setenv("stdout", "serial"); */ -/* } */ - } - } - pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF); - -} - -pci_dev_t pci_hose_find_class(struct pci_controller *hose, int bus, short find_class, int index) -{ - unsigned int sub_bus, found_multi=0; - unsigned short vendor, class; - unsigned char header_type; - pci_dev_t dev; - u8 c1, c2; - - sub_bus = bus; - - for (dev = PCI_BDF(bus,0,0); - dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); - dev += PCI_BDF(0,0,1)) - { - if ( dev == PCI_BDF(hose->first_busno,0,0) ) - continue; - - if (PCI_FUNC(dev) && !found_multi) - continue; - - pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); - - pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); - - if (vendor != 0xffff && vendor != 0x0000) - { - - if (!PCI_FUNC(dev)) - found_multi = header_type & 0x80; - pci_hose_read_config_byte(hose, dev, 0x0B, &c1); - pci_hose_read_config_byte(hose, dev, 0x0A, &c2); - class = c1<<8 | c2; - /*printf("At %02x:%02x:%02x: class %x\n", */ - /* PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), class); */ - if (class == find_class) - { - if (index == 0) - return dev; - else index--; - } - } - } - - return ~0; -} - - -/* - * For a given bus number, find the bridge on this hose that provides this - * bus number. The function scans for bridges and peeks config space offset - * 0x19 (PCI_SECONDARY_BUS). - */ -pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr) -{ - pci_dev_t dev; - int bus; - unsigned int found_multi=0; - unsigned char header_type; - unsigned short vendor; - unsigned char secondary_bus; - - if (hose == NULL) hose = &articiaS_hose; - - if (busnr < hose->first_busno || busnr > hose->last_busno) return PCI_ANY_ID; /* Not in range */ - - /* - * The bridge must be on a lower bus number - */ - for (bus = hose->first_busno; bus < busnr; bus++) - { - for (dev = PCI_BDF(bus,0,0); - dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); - dev += PCI_BDF(0,0,1)) - { - if ( dev == PCI_BDF(hose->first_busno,0,0) ) - continue; - - if (PCI_FUNC(dev) && !found_multi) - continue; - - pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); - - pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); - - if (vendor != 0xffff && vendor != 0x0000) - { - - if (!PCI_FUNC(dev)) - found_multi = header_type & 0x80; - if (header_type == 1) /* Bridge device header */ - { - pci_hose_read_config_byte(hose, dev, PCI_SECONDARY_BUS, &secondary_bus); - if ((int)secondary_bus == busnr) return dev; - } - - } - } - } - return PCI_ANY_ID; -} - -static short classes[] = -{ - PCI_CLASS_DISPLAY_VGA, - PCI_CLASS_DISPLAY_XGA, - PCI_CLASS_DISPLAY_3D, - PCI_CLASS_DISPLAY_OTHER, - ~0 -}; - -extern int execute_bios(pci_dev_t gr_dev, void *); - -pci_dev_t video_dev; - -int articiaS_init_vga (void) -{ - extern void shutdown_bios(void); - pci_dev_t dev = ~0; - int busnr = 0; - int classnr = 0; - - video_dev = PCI_ANY_ID; - - printf("VGA: "); - - PRINTF("Trying to initialize x86 VGA Card(s)\n"); - - while (dev == ~0) - { - PRINTF("Searching for class 0x%x on bus %d\n", classes[classnr], busnr); - /* Find the first of this class on this bus */ - dev = pci_hose_find_class(&articiaS_hose, busnr, classes[classnr], 0); - if (dev != ~0) - { - PRINTF("Found VGA Card at %02x:%02x:%02x\n", PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); - break; - } - busnr++; - if (busnr > articiaS_hose.last_busno) - { - busnr = 0; - classnr ++; - if (classes[classnr] == ~0) - { - printf("NOT PRESENT\n"); - return -1; - } - } - } - - /* - * If we get here we have found the first graphics card. - * If the bus number is not 0, then it is probably behind a bridge, and the - * bridge needs to be told to forward VGA access. - */ - - if (PCI_BUS(dev) != 0) - { - pci_dev_t bridge; - PRINTF("Behind bridge, looking for bridge\n"); - bridge = pci_find_bridge_for_bus(&articiaS_hose, PCI_BUS(dev)); - if (dev != PCI_ANY_ID) - { - unsigned char agp_control_0; - PRINTF("Got the bridge at %02x:%02x:%02x\n", - PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge)); - pci_hose_read_config_byte(&articiaS_hose, bridge, 0x3E, &agp_control_0); - agp_control_0 |= 0x18; - pci_hose_write_config_byte(&articiaS_hose, bridge, 0x3E, agp_control_0); - PRINTF("Configured for VGA forwarding\n"); - } - } - - /* - * Now try to run the bios - */ - PRINTF("Trying to run bios now\n"); - if (execute_bios(dev, gd->relocaddr)) - { - printf("OK\n"); - video_dev = dev; - } - else - { - printf("ERROR\n"); - } - - PRINTF("Done scanning.\n"); - - shutdown_bios(); - - if (dev == PCI_ANY_ID) return -1; - else return 0; - -} diff --git a/board/MAI/AmigaOneG3SE/board_asm_init.S b/board/MAI/AmigaOneG3SE/board_asm_init.S deleted file mode 100644 index 086b19c..0000000 --- a/board/MAI/AmigaOneG3SE/board_asm_init.S +++ /dev/null @@ -1,156 +0,0 @@ -#include "macros.h" - - -#define GLOBALINFO0 0x50 -#define GLOBALINFO0_BO (1<<7) -#define GLOBALINFO2_B1ARBITER (1<<6) -#define HBUSACR0 0x5c -#define HBUSACR2_BURST (1<<0) -#define HBUSACR2_LAT (1<<1) - -#define RECEIVER_HOLDING 0 -#define TRANSMITTER_HOLDING 0 -#define INTERRUPT_ENABLE 1 -#define INTERRUPT_STATUS 2 -#define FIFO_CONTROL 2 -#define LINE_CONTROL 3 -#define MODEM_CONTROL 4 -#define LINE_STATUS 5 -#define MODEM_STATUS 6 -#define SCRATCH_PAD 7 - -#define DIVISOR_LATCH_LSB 0 -#define DIVISOR_LATCH_MSB 1 -#define PRESCALER_DIVISION 5 - -#define UART(x) (0x3f8+(x)) - -#define GLOBALINFO0 0x50 -#define GLOBALINFO0_BO (1<<7) -#define GLOBALINFO2_B1ARBITER (1<<6) -#define HBUSACR0 0x5c -#define HBUSACR2_BURST (1<<0) -#define HBUSACR2_LAT (1<<1) - -#define SUPERIO_1 ((7 << 3) | (0)) -#define SUPERIO_2 ((7 << 3) | (1)) - - .globl board_asm_init - -board_asm_init: - mflr r29 - /* Set 'Must-set' register */ - li r3, 0 - li r4, 0 - li r5, 0x5e - bl pci_read_cfg_byte - ori r3, r3, (1<<1) - xori r6, r3, (1<<1) - li r3, 0 - bl pci_write_cfg_byte - - li r3, 0 - li r5, 0x52 - bl pci_read_cfg_byte - ori r6, r3, (1<<6) - li r3, 0 - bl pci_write_cfg_byte - - li r3, 0 - li r4, 0x08 - li r5, 0xd2 - bl pci_read_cfg_byte - ori r6, r3, (1<<2) - li r3, 0 - bl pci_write_cfg_byte - - - /* Do PCI reset */ -/* li r3, 0 - li r4, 0x38 - li r5, 0x47 - bl pci_read_cfg_byte - ori r6, r3, 0x01 - li r3, 0 - li r4, 0x38 - li r5, 0x47 - bl pci_write_cfg_byte*/ - - - /* Enable NVRAM for environment */ - li r3, 0 - li r4, 0 - li r5, 0x56 - li r6, 0x0B - bl pci_write_cfg_byte - - - /* Init Super-I/O chips */ - - siowb 0x40, 0x08 - siowb 0x41, 0x01 - siowb 0x45, 0x80 - siowb 0x46, 0x60 - siowb 0x47, 0x20 - siowb 0x48, 0x01 - siowb 0x4a, 0xc4 - siowb 0x50, 0x0e - siowb 0x51, 0x76 - siowb 0x52, 0x34 - siowb 0x54, 0x00 - siowb 0x55, 0x90 - siowb 0x56, 0x99 - siowb 0x57, 0x90 - siowb 0x85, 0x01 - - /* Enable configuration mode for SuperIO */ - li r3, 0 - li r4, (7<<3) - li r5, 0x85 - bl pci_read_cfg_byte - ori r6, r3, 0x02 - mr r31, r6 - li r3,0 - bl pci_write_cfg_byte - - /* COM1 as 3f8 */ - outb 0x3f0, 0xe7 - outb 0x3f1, 0xfe - - /* COM2 as 2f8 */ - outb 0x3f0, 0xe8 - outb 0x3f1, 0xeb - - /* Enable */ - outb 0x3f0, 0xe2 - inb r3, 0x3f1 - ori r3, r3, 0x0c - outb 0x3f0, 0xe2 - outbr 0x3f1, r3 - - /* Disable configuration mode */ - li r3, 0 - li r4, (7<<3) - li r5, 0x85 - mr r6, r31 - bl pci_write_cfg_byte - - /* Set line control */ - outb UART(LINE_CONTROL), 0x83 - outb UART(DIVISOR_LATCH_LSB), 0x0c - outb UART(DIVISOR_LATCH_MSB), 0x00 - outb UART(LINE_CONTROL), 0x3 - - mtlr r29 - blr - - - .globl new_reset - .globl new_reset_end -new_reset: - li r0, 0x100 - oris r0, r0, 0xFFF0 - mtlr r0 - blr - -new_reset_end: diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c deleted file mode 100644 index 6b955d8..0000000 --- a/board/MAI/AmigaOneG3SE/cmd_boota.c +++ /dev/null @@ -1,128 +0,0 @@ -#include <common.h> -#include <command.h> -#include "../disk/part_amiga.h" -#include <asm/cache.h> - -DECLARE_GLOBAL_DATA_PTR; - -#undef BOOTA_DEBUG - -#ifdef BOOTA_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -struct block_header { - u32 id; - u32 summed_longs; - s32 chk_sum; -}; - -extern block_dev_desc_t *ide_get_dev (int dev); -extern struct bootcode_block *get_bootcode (block_dev_desc_t * dev_desc); -extern int sum_block (struct block_header *header); - -struct bootcode_block bblk; - -int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - unsigned char *load_address = (unsigned char *) CONFIG_SYS_LOAD_ADDR; - unsigned char *base_address; - unsigned long offset; - - unsigned long part_number = 0; - block_dev_desc_t *boot_disk; - char *s; - struct bootcode_block *boot_code; - - /* Get parameters */ - - switch (argc) { - case 2: - load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16); - part_number = 0; - break; - case 3: - load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16); - part_number = simple_strtol (argv[2], NULL, 16); - break; - } - - base_address = load_address; - - PRINTF ("Loading boot code from disk %d to %p\n", part_number, - load_address); - - /* Find the appropriate disk device */ - boot_disk = ide_get_dev (part_number); - if (!boot_disk) { - PRINTF ("Unknown disk %d\n", part_number); - return 1; - } - - /* Find the bootcode block */ - boot_code = get_bootcode (boot_disk); - if (!boot_code) { - PRINTF ("Not a bootable disk %d\n", part_number); - return 1; - } - - /* Only use the offset from the first block */ - offset = boot_code->load_data[0]; - memcpy (load_address, &boot_code->load_data[1], 122 * 4); - load_address += 122 * 4; - - /* Setup for the loop */ - bblk.next = boot_code->next; - boot_code = &bblk; - - /* Scan the chain, and copy the loader succesively into the destination area */ - while (0xffffffff != boot_code->next) { - PRINTF ("Loading block %d\n", boot_code->next); - - /* Load block */ - if (1 != - boot_disk->block_read (boot_disk->dev, boot_code->next, 1, - (ulong *) & bblk)) { - PRINTF ("Read error\n"); - return 1; - } - - /* check sum */ - if (sum_block ((struct block_header *) (ulong *) & bblk) != 0) { - PRINTF ("Checksum error\n"); - return 1; - } - - /* Ok, concatenate it to the already loaded code */ - memcpy (load_address, boot_code->load_data, 123 * 4); - load_address += 123 * 4; - } - - printf ("Bootcode loaded to %p (size %d)\n", base_address, - load_address - base_address); - printf ("Entry point at %p\n", base_address + offset); - - flush_cache (base_address, load_address - base_address); - - - s = getenv ("autostart"); - if (s && strcmp (s, "yes") == 0) { - void (*boot) (bd_t *, char *, block_dev_desc_t *); - char *args; - - boot = (void (*)(bd_t *, char *, block_dev_desc_t *)) (base_address + offset); - boot (gd->bd, getenv ("amiga_bootargs"), boot_disk); - } - - - return 0; -} -#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP) -U_BOOT_CMD( - boota, 3, 1, do_boota, - "boot an Amiga kernel", - "address disk" -); -#endif /* _CMD_BOOTA_H */ diff --git a/board/MAI/AmigaOneG3SE/config.mk b/board/MAI/AmigaOneG3SE/config.mk deleted file mode 100644 index 930a793..0000000 --- a/board/MAI/AmigaOneG3SE/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# AmigaOneG3SE boards -# - -X86EMU = -I../bios_emulator/scitech/include -I../bios_emulator/scitech/src/x86emu - -TEXT_BASE = 0xfff00000 - -PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -Wa,-mregnames -DEASTEREGG $(X86EMU) -Dprintk=printf #-DDEBUG diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c deleted file mode 100644 index b9df55c..0000000 --- a/board/MAI/AmigaOneG3SE/enet.c +++ /dev/null @@ -1,840 +0,0 @@ -/* - * (C) Copyright 2002 - * Adam Kowalczyk, ACK Software Controls Inc. akowalczyk(a)cogeco.ca - * - * Some portions taken from 3c59x.c Written 1996-1999 by Donald Becker. - * - * Outline of the program based on eepro100.c which is - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <netdev.h> -#include <asm/io.h> -#include <pci.h> - -#include "articiaS.h" -#include "memio.h" - -/* 3Com Ethernet PCI definitions*/ - -/* #define PCI_VENDOR_ID_3COM 0x10B7 */ -#define PCI_DEVICE_ID_3COM_3C905C 0x9200 - -/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */ - -#define TotalReset (0<<11) -#define SelectWindow (1<<11) -#define StartCoax (2<<11) -#define RxDisable (3<<11) -#define RxEnable (4<<11) -#define RxReset (5<<11) -#define UpStall (6<<11) -#define UpUnstall (6<<11)+1 -#define DownStall (6<<11)+2 -#define DownUnstall (6<<11)+3 -#define RxDiscard (8<<11) -#define TxEnable (9<<11) -#define TxDisable (10<<11) -#define TxReset (11<<11) -#define FakeIntr (12<<11) -#define AckIntr (13<<11) -#define SetIntrEnb (14<<11) -#define SetStatusEnb (15<<11) -#define SetRxFilter (16<<11) -#define SetRxThreshold (17<<11) -#define SetTxThreshold (18<<11) -#define SetTxStart (19<<11) -#define StartDMAUp (20<<11) -#define StartDMADown (20<<11)+1 -#define StatsEnable (21<<11) -#define StatsDisable (22<<11) -#define StopCoax (23<<11) -#define SetFilterBit (25<<11) - -/* The SetRxFilter command accepts the following classes */ - -#define RxStation 1 -#define RxMulticast 2 -#define RxBroadcast 4 -#define RxProm 8 - -/* 3Com status word defnitions */ - -#define IntLatch 0x0001 -#define HostError 0x0002 -#define TxComplete 0x0004 -#define TxAvailable 0x0008 -#define RxComplete 0x0010 -#define RxEarly 0x0020 -#define IntReq 0x0040 -#define StatsFull 0x0080 -#define DMADone (1<<8) -#define DownComplete (1<<9) -#define UpComplete (1<<10) -#define DMAInProgress (1<<11) /* DMA controller is still busy.*/ -#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/ - -/* Polling Registers */ - -#define DnPoll 0x2d -#define UpPoll 0x3d - -/* Register window 0 offets */ - -#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */ -#define Wn0EepromData 12 /* Window 0: EEPROM results register. */ -#define IntrStatus 0x0E /* Valid in all windows. */ - -/* Register window 0 EEPROM bits */ - -#define EEPROM_Read 0x80 -#define EEPROM_WRITE 0x40 -#define EEPROM_ERASE 0xC0 -#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */ -#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */ - -/* EEPROM locations. */ - -#define PhysAddr01 0 -#define PhysAddr23 1 -#define PhysAddr45 2 -#define ModelID 3 -#define EtherLink3ID 7 -#define IFXcvrIO 8 -#define IRQLine 9 -#define NodeAddr01 10 -#define NodeAddr23 11 -#define NodeAddr45 12 -#define DriverTune 13 -#define Checksum 15 - -/* Register window 1 offsets, the window used in normal operation */ - -#define TX_FIFO 0x10 -#define RX_FIFOa 0x10 -#define RxErrors 0x14 -#define RxStatus 0x18 -#define Timer 0x1A -#define TxStatus 0x1B -#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */ - -/* Register Window 2 */ - -#define Wn2_ResetOptions 12 - -/* Register Window 3: MAC/config bits */ - -#define Wn3_Config 0 /* Internal Configuration */ -#define Wn3_MAC_Ctrl 6 -#define Wn3_Options 8 - -#define BFEXT(value, offset, bitcount) \ - ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) - -#define BFINS(lhs, rhs, offset, bitcount) \ - (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ - (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) - -#define RAM_SIZE(v) BFEXT(v, 0, 3) -#define RAM_WIDTH(v) BFEXT(v, 3, 1) -#define RAM_SPEED(v) BFEXT(v, 4, 2) -#define ROM_SIZE(v) BFEXT(v, 6, 2) -#define RAM_SPLIT(v) BFEXT(v, 16, 2) -#define XCVR(v) BFEXT(v, 20, 4) -#define AUTOSELECT(v) BFEXT(v, 24, 1) - -/* Register Window 4: Xcvr/media bits */ - -#define Wn4_FIFODiag 4 -#define Wn4_NetDiag 6 -#define Wn4_PhysicalMgmt 8 -#define Wn4_Media 10 - -#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */ -#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ -#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */ -#define Media_LnkBeat 0x0800 - -/* Register Window 7: Bus Master control */ - -#define Wn7_MasterAddr 0 -#define Wn7_MasterLen 6 -#define Wn7_MasterStatus 12 - -/* Boomerang bus master control registers. */ - -#define PktStatus 0x20 -#define DownListPtr 0x24 -#define FragAddr 0x28 -#define FragLen 0x2c -#define TxFreeThreshold 0x2f -#define UpPktStatus 0x30 -#define UpListPtr 0x38 - -/* The Rx and Tx descriptor lists. */ - -#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */ -#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */ - -struct rx_desc_3com { - u32 next; /* Last entry points to 0 */ - u32 status; /* FSH -> Frame Start Header */ - u32 addr; /* Up to 63 addr/len pairs possible */ - u32 length; /* Set LAST_FRAG to indicate last pair */ -}; - -/* Values for the Rx status entry. */ - -#define RxDComplete 0x00008000 -#define RxDError 0x4000 -#define IPChksumErr (1<<25) -#define TCPChksumErr (1<<26) -#define UDPChksumErr (1<<27) -#define IPChksumValid (1<<29) -#define TCPChksumValid (1<<30) -#define UDPChksumValid (1<<31) - -struct tx_desc_3com { - u32 next; /* Last entry points to 0 */ - u32 status; /* bits 0:12 length, others see below */ - u32 addr; - u32 length; -}; - -/* Values for the Tx status entry. */ - -#define CRCDisable 0x2000 -#define TxDComplete 0x8000 -#define AddIPChksum 0x02000000 -#define AddTCPChksum 0x04000000 -#define AddUDPChksum 0x08000000 -#define TxIntrUploaded 0x80000000 /* IRQ when in FIFO, but maybe not sent. */ - -/* XCVR Types */ - -#define XCVR_10baseT 0 -#define XCVR_AUI 1 -#define XCVR_10baseTOnly 2 -#define XCVR_10base2 3 -#define XCVR_100baseTx 4 -#define XCVR_100baseFx 5 -#define XCVR_MII 6 -#define XCVR_NWAY 8 -#define XCVR_ExtMII 9 -#define XCVR_Default 10 /* I don't think this is correct -> should have been 0x10 if Auto Negotiate */ - -struct descriptor { /* A generic descriptor. */ - u32 next; /* Last entry points to 0 */ - u32 status; /* FSH -> Frame Start Header */ - u32 addr; /* Up to 63 addr/len pairs possible */ - u32 length; /* Set LAST_FRAG to indicate last pair */ -}; - -/* Misc. definitions */ - -#define NUM_RX_DESC PKTBUFSRX * 10 -#define NUM_TX_DESC 1 /* Number of TX descriptors */ - -#define TOUT_LOOP 1000000 - -#define ETH_ALEN 6 - -#define EL3WINDOW(dev, win_num) ETH_OUTW(dev, SelectWindow + (win_num), EL3_CMD) -#define EL3_CMD 0x0e -#define EL3_STATUS 0x0e - - -#undef ETH_DEBUG - -#ifdef ETH_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - - -static struct rx_desc_3com *rx_ring; /* RX descriptor ring */ -static struct tx_desc_3com *tx_ring; /* TX descriptor ring */ -static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN];/* storage for the incoming messages */ -static int rx_next = 0; /* RX descriptor ring pointer */ -static int tx_next = 0; /* TX descriptor ring pointer */ -static int tx_threshold; - -static void init_rx_ring(struct eth_device* dev); -static void purge_tx_ring(struct eth_device* dev); - -static void read_hw_addr(struct eth_device* dev, bd_t * bis); - -static int eth_3com_init(struct eth_device* dev, bd_t *bis); -static int eth_3com_send(struct eth_device* dev, volatile void *packet, int length); -static int eth_3com_recv(struct eth_device* dev); -static void eth_3com_halt(struct eth_device* dev); - -#define io_to_phys(a) pci_io_to_phys((pci_dev_t)dev->priv, a) -#define phys_to_io(a) pci_phys_to_io((pci_dev_t)dev->priv, a) -#define mem_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) -#define phys_to_mem(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) - -static inline int ETH_INL(struct eth_device* dev, u_long addr) -{ - __asm__ volatile ("eieio"); - return le32_to_cpu(*(volatile u32 *)io_to_phys(addr + dev->iobase)); -} - -static inline int ETH_INW(struct eth_device* dev, u_long addr) -{ - __asm__ volatile ("eieio"); - return le16_to_cpu(*(volatile u16 *)io_to_phys(addr + dev->iobase)); -} - -static inline int ETH_INB(struct eth_device* dev, u_long addr) -{ - __asm__ volatile ("eieio"); - return *(volatile u8 *)io_to_phys(addr + dev->iobase); -} - -static inline void ETH_OUTB(struct eth_device* dev, int command, u_long addr) -{ - *(volatile u8 *)io_to_phys(addr + dev->iobase) = command; - __asm__ volatile ("eieio"); -} - -static inline void ETH_OUTW(struct eth_device* dev, int command, u_long addr) -{ - *(volatile u16 *)io_to_phys(addr + dev->iobase) = cpu_to_le16(command); - __asm__ volatile ("eieio"); -} - -static inline void ETH_OUTL(struct eth_device* dev, int command, u_long addr) -{ - *(volatile u32 *)io_to_phys(addr + dev->iobase) = cpu_to_le32(command); - __asm__ volatile ("eieio"); -} - -static inline int ETH_STATUS(struct eth_device* dev) -{ - __asm__ volatile ("eieio"); - return le16_to_cpu(*(volatile u16 *)io_to_phys(EL3_STATUS + dev->iobase)); -} - -static inline void ETH_CMD(struct eth_device* dev, int command) -{ - *(volatile u16 *)io_to_phys(EL3_CMD + dev->iobase) = cpu_to_le16(command); - __asm__ volatile ("eieio"); -} - -/* Command register is always in the same spot in all the register windows */ -/* This function issues a command and waits for it so complete by checking the CmdInProgress bit */ - -static int issue_and_wait(struct eth_device* dev, int command) -{ - - int i, status; - - ETH_CMD(dev, command); - for (i = 0; i < 2000; i++) { - status = ETH_STATUS(dev); - /*printf ("Issue: status 0x%4x.\n", status); */ - if (!(status & CmdInProgress)) - return 1; - } - - /* OK, that didn't work. Do it the slow way. One second */ - for (i = 0; i < 100000; i++) { - status = ETH_STATUS(dev); - /*printf ("Issue: status 0x%4x.\n", status); */ - return 1; - udelay(10); - } - PRINTF("Ethernet command: 0x%4x did not complete! Status: 0x%4x\n", command, ETH_STATUS(dev) ); - return 0; -} - -/* Determine network media type and set up 3com accordingly */ -/* I think I'm going to start with something known first like 10baseT */ - -static int auto_negotiate (struct eth_device *dev) -{ - int i; - - EL3WINDOW (dev, 1); - - /* Wait for Auto negotiation to complete */ - for (i = 0; i <= 1000; i++) { - if (ETH_INW (dev, 2) & 0x04) - break; - udelay (100); - - if (i == 1000) { - PRINTF ("Error: Auto negotiation failed\n"); - return 0; - } - } - - - return 1; -} - -void eth_interrupt (struct eth_device *dev) -{ - u16 status = ETH_STATUS (dev); - - printf ("eth0: status = 0x%04x\n", status); - - if (!(status & IntLatch)) - return; - - if (status & (1 << 6)) { - ETH_CMD (dev, AckIntr | (1 << 6)); - printf ("Acknowledged Interrupt command\n"); - } - - if (status & DownComplete) { - ETH_CMD (dev, AckIntr | DownComplete); - printf ("Acknowledged DownComplete\n"); - } - - if (status & UpComplete) { - ETH_CMD (dev, AckIntr | UpComplete); - printf ("Acknowledged UpComplete\n"); - } - - ETH_CMD (dev, AckIntr | IntLatch); - printf ("Acknowledged IntLatch\n"); -} - -int eth_3com_initialize (bd_t * bis) -{ - u32 eth_iobase = 0, status; - int card_number = 0, ret; - struct eth_device *dev; - pci_dev_t devno; - char *s; - - s = getenv ("3com_base"); - - /* Find ethernet controller on the PCI bus */ - - if ((devno = - pci_find_device (PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, - 0)) < 0) { - PRINTF ("Error: Cannot find the ethernet device on the PCI bus\n"); - goto Done; - } - - if (s) { - unsigned long base = atoi (s); - - pci_write_config_dword (devno, PCI_BASE_ADDRESS_0, - base | 0x01); - } - - ret = pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &eth_iobase); - eth_iobase &= ~0xf; - - PRINTF ("eth: 3Com Found at Address: 0x%x\n", eth_iobase); - - pci_write_config_dword (devno, PCI_COMMAND, - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); - - /* Check if I/O accesses and Bus Mastering are enabled */ - - ret = pci_read_config_dword (devno, PCI_COMMAND, &status); - - if (!(status & PCI_COMMAND_IO)) { - printf ("Error: Cannot enable IO access.\n"); - goto Done; - } - - if (!(status & PCI_COMMAND_MEMORY)) { - printf ("Error: Cannot enable MEMORY access.\n"); - goto Done; - } - - if (!(status & PCI_COMMAND_MASTER)) { - printf ("Error: Cannot enable Bus Mastering.\n"); - goto Done; - } - - dev = (struct eth_device *) malloc (sizeof (*dev)); /*struct eth_device)); */ - - sprintf (dev->name, "3Com 3c920c#%d", card_number); - dev->iobase = eth_iobase; - dev->priv = (void *) devno; - dev->init = eth_3com_init; - dev->halt = eth_3com_halt; - dev->send = eth_3com_send; - dev->recv = eth_3com_recv; - - eth_register (dev); - -/* { */ -/* char interrupt; */ -/* devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0); */ -/* pci_read_config_byte(devno, PCI_INTERRUPT_LINE, &interrupt); */ - -/* printf("Installing eth0 interrupt handler to %d\n", interrupt); */ -/* irq_install_handler(interrupt, eth_interrupt, dev); */ -/* } */ - - card_number++; - - /* Set the latency timer for value */ - s = getenv ("3com_latency"); - if (s) { - ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER, - (unsigned char) atoi (s)); - } else - ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x0a); - - read_hw_addr (dev, bis); /* get the MAC address from Window 2 */ - - /* Reset the ethernet controller */ - - PRINTF ("Issuing reset command....\n"); - if (!issue_and_wait (dev, TotalReset)) { - printf ("Error: Cannot reset ethernet controller.\n"); - goto Done; - } else - PRINTF ("Ethernet controller reset.\n"); - - /* allocate memory for rx and tx rings */ - - if (!(rx_ring = memalign (sizeof (struct rx_desc_3com) * NUM_RX_DESC, 16))) { - PRINTF ("Cannot allocate memory for RX_RING.....\n"); - goto Done; - } - - if (!(tx_ring = memalign (sizeof (struct tx_desc_3com) * NUM_TX_DESC, 16))) { - PRINTF ("Cannot allocate memory for TX_RING.....\n"); - goto Done; - } - -Done: - return status; -} - - -static int eth_3com_init (struct eth_device *dev, bd_t * bis) -{ - int i, status = 0; - int tx_cur, loop; - u16 status_enable, intr_enable; - struct descriptor *ias_cmd; - - /* Determine what type of network the machine is connected to */ - /* presently drops the connect to 10Mbps */ - - if (!auto_negotiate (dev)) { - printf ("Error: Cannot determine network media.\n"); - goto Done; - } - - issue_and_wait (dev, TxReset); - issue_and_wait (dev, RxReset | 0x04); - - /* Switch to register set 7 for normal use. */ - EL3WINDOW (dev, 7); - - /* Initialize Rx and Tx rings */ - - init_rx_ring (dev); - purge_tx_ring (dev); - - ETH_CMD (dev, SetRxFilter | RxStation | RxBroadcast | RxProm); - - issue_and_wait (dev, SetTxStart | 0x07ff); - - /* Below sets which indication bits to be seen. */ - - status_enable = - SetStatusEnb | HostError | DownComplete | UpComplete | (1 << - 6); - ETH_CMD (dev, status_enable); - - /* Below sets no bits are to cause an interrupt since this is just polling */ - - intr_enable = SetIntrEnb; -/* intr_enable = SetIntrEnb | (1<<9) | (1<<10) | (1<<6); */ - ETH_CMD (dev, intr_enable); - ETH_OUTB (dev, 127, UpPoll); - - /* Ack all pending events, and set active indicator mask */ - - ETH_CMD (dev, AckIntr | IntLatch | TxAvailable | RxEarly | IntReq); - ETH_CMD (dev, intr_enable); - - /* Tell the adapter where the RX ring is located */ - - issue_and_wait (dev, UpStall); /* Stall and set the UplistPtr */ - ETH_OUTL (dev, (u32) & rx_ring[rx_next], UpListPtr); - ETH_CMD (dev, RxEnable); /* Enable the receiver. */ - issue_and_wait (dev, UpUnstall); - - /* Send the Individual Address Setup frame */ - - tx_cur = tx_next; - tx_next = ((tx_next + 1) % NUM_TX_DESC); - - ias_cmd = (struct descriptor *) &tx_ring[tx_cur]; - ias_cmd->status = cpu_to_le32 (1 << 31); /* set DnIndicate bit. */ - ias_cmd->next = 0; - ias_cmd->addr = cpu_to_le32 ((u32) dev->enetaddr); - ias_cmd->length = cpu_to_le32 (6 | LAST_FRAG); - - /* Tell the adapter where the TX ring is located */ - - ETH_CMD (dev, TxEnable); /* Enable transmitter. */ - issue_and_wait (dev, DownStall); /* Stall and set the DownListPtr. */ - ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr); - issue_and_wait (dev, DownUnstall); - for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) { - if (i >= TOUT_LOOP) { - PRINTF ("TX Ring status (Init): 0x%4x\n", - le32_to_cpu (tx_ring[tx_cur].status)); - PRINTF ("ETH_STATUS: 0x%x\n", ETH_STATUS (dev)); - goto Done; - } - } - if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */ - ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */ - issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */ - ETH_OUTL (dev, 0, DownListPtr); - issue_and_wait (dev, DownUnstall); - } - status = 1; -Done: - return status; -} - -int eth_3com_send (struct eth_device *dev, volatile void *packet, int length) -{ - int i, status = 0; - int tx_cur; - - if (length <= 0) { - PRINTF ("eth: bad packet size: %d\n", length); - goto Done; - } - - tx_cur = tx_next; - tx_next = (tx_next + 1) % NUM_TX_DESC; - - tx_ring[tx_cur].status = cpu_to_le32 (1 << 31); /* set DnIndicate bit */ - tx_ring[tx_cur].next = 0; - tx_ring[tx_cur].addr = cpu_to_le32 (((u32) packet)); - tx_ring[tx_cur].length = cpu_to_le32 (length | LAST_FRAG); - - /* Send the packet */ - - issue_and_wait (dev, DownStall); /* stall and set the DownListPtr */ - ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr); - issue_and_wait (dev, DownUnstall); - - for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) { - if (i >= TOUT_LOOP) { - PRINTF ("TX Ring status (send): 0x%4x\n", - le32_to_cpu (tx_ring[tx_cur].status)); - goto Done; - } - } - if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */ - ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */ - issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */ - ETH_OUTL (dev, 0, DownListPtr); - issue_and_wait (dev, DownUnstall); - } - status = 1; -Done: - return status; -} - -void PrintPacket (uchar * packet, int length) -{ - int loop; - uchar *ptr; - - printf ("Printing packet of length %x.\n\n", length); - ptr = packet; - for (loop = 1; loop <= length; loop++) { - printf ("%2x ", *ptr++); - if ((loop % 40) == 0) - printf ("\n"); - } -} - -int eth_3com_recv (struct eth_device *dev) -{ - u16 stat = 0; - u32 status; - int rx_prev, length = 0; - - while (!(ETH_STATUS (dev) & UpComplete)) /* wait on receipt of packet */ - ; - - status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */ - - while (status & (1 << 15)) { - /* A packet has been received */ - - if (status & (1 << 15)) { - /* A valid frame received */ - - length = le32_to_cpu (rx_ring[rx_next].status) & 0x1fff; /* length is in bits 0 - 12 */ - - /* Pass the packet up to the protocol layers */ - - NetReceive ((uchar *) - le32_to_cpu (rx_ring[rx_next].addr), - length); - rx_ring[rx_next].status = 0; /* clear the status word */ - ETH_CMD (dev, AckIntr | UpComplete); - issue_and_wait (dev, UpUnstall); - } else if (stat & HostError) { - /* There was an error */ - - printf ("Rx error status: 0x%4x\n", stat); - init_rx_ring (dev); - goto Done; - } - - rx_prev = rx_next; - rx_next = (rx_next + 1) % NUM_RX_DESC; - stat = ETH_STATUS (dev); /* register status */ - status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */ - } -Done: - return length; -} - -void eth_3com_halt (struct eth_device *dev) -{ - if (!(dev->iobase)) { - goto Done; - } - - issue_and_wait (dev, DownStall); /* shut down transmit and receive */ - issue_and_wait (dev, UpStall); - issue_and_wait (dev, RxDisable); - issue_and_wait (dev, TxDisable); - -/* free(tx_ring); /###* release memory allocated to the DPD and UPD rings */ -/* free(rx_ring); */ - -Done: - return; -} - -static void init_rx_ring (struct eth_device *dev) -{ - int i; - - PRINTF ("Initializing rx_ring. rx_buffer = %p\n", rx_buffer); - issue_and_wait (dev, UpStall); - - for (i = 0; i < NUM_RX_DESC; i++) { - rx_ring[i].next = - cpu_to_le32 (((u32) & - rx_ring[(i + 1) % NUM_RX_DESC])); - rx_ring[i].status = 0; - rx_ring[i].addr = cpu_to_le32 (((u32) & rx_buffer[i][0])); - rx_ring[i].length = cpu_to_le32 (PKTSIZE_ALIGN | LAST_FRAG); - } - rx_next = 0; -} - -static void purge_tx_ring (struct eth_device *dev) -{ - int i; - - PRINTF ("Purging tx_ring.\n"); - - tx_next = 0; - - for (i = 0; i < NUM_TX_DESC; i++) { - tx_ring[i].next = 0; - tx_ring[i].status = 0; - tx_ring[i].addr = 0; - tx_ring[i].length = 0; - } -} - -static void read_hw_addr (struct eth_device *dev, bd_t * bis) -{ - u8 hw_addr[ETH_ALEN]; - unsigned int eeprom[0x40]; - unsigned int checksum = 0; - int i, j, timer; - - /* First, try the env ... if that works, we're all done! */ - if (eth_getenv_enetaddr("ethaddr", hw_addr)) - goto Done; - - /* Read the station address from the EEPROM. */ - - EL3WINDOW (dev, 0); - for (i = 0; i < 0x40; i++) { - ETH_OUTW (dev, EEPROM_Read + i, Wn0EepromCmd); - /* Pause for at least 162 us. for the read to take place. */ - for (timer = 10; timer >= 0; timer--) { - udelay (162); - if ((ETH_INW (dev, Wn0EepromCmd) & 0x8000) == 0) - break; - } - eeprom[i] = ETH_INW (dev, Wn0EepromData); - } - - /* Checksum calculation. I'm not sure about this part and there seems to be a bug on the 3com side of things */ - - for (i = 0; i < 0x21; i++) - checksum ^= eeprom[i]; - checksum = (checksum ^ (checksum >> 8)) & 0xff; - - if (checksum != 0xbb) - printf (" *** INVALID EEPROM CHECKSUM %4.4x *** \n", - checksum); - - for (i = 0, j = 0; i < 3; i++) { - hw_addr[j++] = (u8) ((eeprom[i + 10] >> 8) & 0xff); - hw_addr[j++] = (u8) (eeprom[i + 10] & 0xff); - } - - /* MAC Address is in window 2, write value from EEPROM to window 2 */ - - EL3WINDOW (dev, 2); - for (i = 0; i < 6; i++) - ETH_OUTB (dev, hw_addr[i], i); - - for (j = 0; j < ETH_ALEN; j += 2) { - hw_addr[j] = (u8) (ETH_INW (dev, j) & 0xff); - hw_addr[j + 1] = (u8) ((ETH_INW (dev, j) >> 8) & 0xff); - } - - /* Save the result in the environment */ - eth_setenv_enetaddr("ethaddr", hw_addr); - -Done: - memcpy(dev->enetaddr, hw_addr, 6); - return; -} diff --git a/board/MAI/AmigaOneG3SE/flash.c b/board/MAI/AmigaOneG3SE/flash.c deleted file mode 100644 index a96d5ba..0000000 --- a/board/MAI/AmigaOneG3SE/flash.c +++ /dev/null @@ -1,35 +0,0 @@ -#include <common.h> -#include <flash.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -unsigned long flash_init(void) -{ - int i; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) - { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = 0; - flash_info[i].size = 0; - } - - - return 1; -} - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - return 1; -} - -void flash_print_info(flash_info_t *info) -{ - printf("No flashrom installed\n"); -} - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - return 0; -} diff --git a/board/MAI/AmigaOneG3SE/flash_new.c b/board/MAI/AmigaOneG3SE/flash_new.c deleted file mode 100644 index 9beb048..0000000 --- a/board/MAI/AmigaOneG3SE/flash_new.c +++ /dev/null @@ -1,651 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber(a)mclx.com>, Mission Critical Linux, Inc. - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <flash.h> -#include <asm/io.h> -#include "memio.h" - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -static ulong flash_get_size (ulong addr, flash_info_t *info); -static int flash_get_offsets (ulong base, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_reset (ulong addr); - -int flash_xd_nest; - -static void flash_to_xd(void) -{ - unsigned char x; - - flash_xd_nest ++; - - if (flash_xd_nest == 1) - { - DEBUGF("Flash on XD\n"); - x = pci_read_cfg_byte(0, 0, 0x74); - pci_write_cfg_byte(0, 0, 0x74, x|1); - } -} - -static void flash_to_mem(void) -{ - unsigned char x; - - flash_xd_nest --; - - if (flash_xd_nest == 0) - { - DEBUGF("Flash on memory bus\n"); - x = pci_read_cfg_byte(0, 0, 0x74); - pci_write_cfg_byte(0, 0, 0x74, x&0xFE); - } -} - -unsigned long flash_init_old(void) -{ - int i; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) - { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = 0; - flash_info[i].size = 0; - } - - - return 1; -} - -unsigned long flash_init (void) -{ - unsigned int i; - unsigned long flash_size = 0; - - flash_xd_nest = 0; - - flash_to_xd(); - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = 0; - flash_info[i].size = 0; - } - - DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE); - - flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info); - - DEBUGF("## Flash bank size: %08lx\n", flash_size); - - if (flash_size) { -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - } else { - puts ("Warning: the BOOT Flash is not initialised !"); - } - - flash_to_mem(); - - return flash_size; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (ulong addr, flash_info_t *info) -{ - short i; - uchar value; - uchar *x = (uchar *)addr; - - flash_to_xd(); - - /* Write auto select command: read Manufacturer ID */ - x[0x0555] = 0xAA; - __asm__ volatile ("sync\n eieio"); - x[0x02AA] = 0x55; - __asm__ volatile ("sync\n eieio"); - x[0x0555] = 0x90; - __asm__ volatile ("sync\n eieio"); - - value = x[0]; - __asm__ volatile ("sync\n eieio"); - - DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value); - - switch (value | (value << 16)) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - - case STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - flash_reset (addr); - return 0; - } - - value = x[1]; - __asm__ volatile ("sync\n eieio"); - - DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value); - - switch (value) { - case AMD_ID_F040B: - DEBUGF("Am29F040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - case AMD_ID_LV040B: - DEBUGF("Am29LV040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - case AMD_ID_LV400T: - DEBUGF("Am29LV400T\n"); - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - DEBUGF("Am29LV400B\n"); - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - DEBUGF("Am29LV800T\n"); - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - DEBUGF("Am29LV400B\n"); - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - DEBUGF("Am29LV160T\n"); - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - DEBUGF("Am29LV160B\n"); - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV320T: - DEBUGF("Am29LV320T\n"); - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - -#if 0 - /* Has the same ID as AMD_ID_LV320T, to be fixed */ - case AMD_ID_LV320B: - DEBUGF("Am29LV320B\n"); - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - - case AMD_ID_LV033C: - DEBUGF("Am29LV033C\n"); - info->flash_id += FLASH_AM033C; - info->sector_count = 64; - info->size = 0x01000000; - break; /* => 16Mb */ - - case STM_ID_F040B: - DEBUGF("M29F040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - default: - info->flash_id = FLASH_UNKNOWN; - flash_reset (addr); - flash_to_mem(); - return (0); /* => no or unknown flash */ - - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if (! flash_get_offsets (addr, info)) { - flash_reset (addr); - flash_to_mem(); - return 0; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - value = in8(info->start[i] + 2); - iobarrier_rw(); - info->protect[i] = (value & 1) != 0; - } - - /* - * Reset bank to read mode - */ - flash_reset (addr); - - flash_to_mem(); - - return (info->size); -} - -static int flash_get_offsets (ulong base, flash_info_t *info) -{ - unsigned int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - /* set sector offsets for uniform sector type */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + i * info->size / - info->sector_count; - } - break; - default: - return 0; - } - - return 1; -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile ulong addr = info->start[0]; - int flag, prot, sect, l_sect; - ulong start, now, last; - - flash_to_xd(); - - if (s_first < 0 || s_first > s_last) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - flash_to_mem(); - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - flash_to_mem(); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - out8(addr + 0x555, 0x80); - iobarrier_rw(); - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = info->start[sect]; - out8(addr, 0x30); - iobarrier_rw(); - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = info->start[l_sect]; - - DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT); - - while ((in8(addr) & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - flash_reset (info->start[0]); - flash_to_mem(); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - iobarrier_rw(); - } - -DONE: - /* reset to read mode */ - flash_reset (info->start[0]); - flash_to_mem(); - - printf (" done\n"); - return 0; -} - -/* - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - flash_to_xd(); - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - flash_to_mem(); - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - flash_to_mem(); - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - flash_to_mem(); - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - - flash_to_mem(); - return (write_word(info, wp, data)); -} - -/* - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - volatile ulong addr = info->start[0]; - ulong start; - int i; - - flash_to_xd(); - - /* Check if Flash is (sufficiently) erased */ - if ((in32(dest) & data) != data) { - flash_to_mem(); - return (2); - } - - /* write each byte out */ - for (i = 0; i < 4; i++) { - char *data_ch = (char *)&data; - int flag = disable_interrupts(); - - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - out8(addr + 0x555, 0xA0); - iobarrier_rw(); - out8(dest+i, data_ch[i]); - iobarrier_rw(); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flash_reset (addr); - flash_to_mem(); - return (1); - } - iobarrier_rw(); - } - } - - flash_reset (addr); - flash_to_mem(); - return (0); -} - -/* - * Reset bank to read mode - */ -static void flash_reset (ulong addr) -{ - flash_to_xd(); - out8(addr, 0xF0); /* reset bank */ - iobarrier_rw(); - flash_to_mem(); -} - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_STM: printf ("SGS THOMSON "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - if (info->size % 0x100000 == 0) { - printf (" Size: %ld MB in %d Sectors\n", - info->size / 0x100000, info->sector_count); - } else if (info->size % 0x400 == 0) { - printf (" Size: %ld KB in %d Sectors\n", - info->size / 0x400, info->sector_count); - } else { - printf (" Size: %ld B in %d Sectors\n", - info->size, info->sector_count); - } - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} diff --git a/board/MAI/AmigaOneG3SE/i8259.c b/board/MAI/AmigaOneG3SE/i8259.c deleted file mode 100644 index 34f489f..0000000 --- a/board/MAI/AmigaOneG3SE/i8259.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * (C) Copyright 2002 - * John W. Linville, linville(a)tuxdriver.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include "i8259.h" - -#undef IRQ_DEBUG - -#ifdef IRQ_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -static inline unsigned char read_byte(volatile unsigned char* from) -{ - int x; - asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from)); - return (unsigned char)x; -} - -static inline void write_byte(volatile unsigned char *to, int x) -{ - asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x)); -} - -static inline unsigned long read_long_little(volatile unsigned long *from) -{ - unsigned long x; - asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from)); - return (unsigned long)x; -} - -#ifdef out8 -#undef out8 -#endif - -#ifdef in8 -#undef in8 -#endif - -#define out8(addr, byte) write_byte(0xFE000000 | addr, byte) -#define in8(addr) read_byte(0xFE000000 | addr) - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -static char cached_imr[2] = {0xff, 0xff}; - -#define cached_imr1 (cached_imr[0]) -#define cached_imr2 (cached_imr[1]) - -void i8259_init(void) -{ - char dummy; - PRINTF("Initializing Interrupt controller\n"); - /* init master interrupt controller */ - out8(0x20, 0x11); /* 0x19); /###* Start init sequence */ - out8(0x21, 0x00); /* Vector base */ - out8(0x21, 0x04); /* edge tiggered, Cascade (slave) on IRQ2 */ - out8(0x21, 0x11); /* was: 0x01); /###* Select 8086 mode */ - - /* init slave interrupt controller */ - out8(0xA0, 0x11); /* 0x19); /###* Start init sequence */ - out8(0xA1, 0x08); /* Vector base */ - out8(0xA1, 0x02); /* edge triggered, Cascade (slave) on IRQ2 */ - out8(0xA1, 0x11); /* was: 0x01); /###* Select 8086 mode */ - - /* always read ISR */ - out8(0x20, 0x0B); - dummy = in8(ISR_1); - out8(0xA0, 0x0B); - dummy = in8(ISR_2); - -/* out8(0x43, 0x30); */ -/* out8(0x40, 0); */ -/* out8(0x40, 0); */ -/* out8(0x43, 0x70); */ -/* out8(0x41, 0); */ -/* out8(0x41, 0); */ -/* out8(0x43, 0xb0); */ -/* out8(0x42, 0); */ -/* out8(0x42, 0); */ - - /* Mask all interrupts */ - out8(IMR_2, cached_imr2); - out8(IMR_1, cached_imr1); - - i8259_unmask_irq(2); -#if 0 - { - int i; - for (i=0; i<16; i++) - { - i8259_unmask_irq(i); - } - } -#endif -} - -static volatile char *pci_intack = (void *)0xFEF00000; - -int i8259_irq(void) -{ - int irq; - - irq = read_long_little(pci_intack) & 0xff; - if (irq==7) { - /* - * This may be a spurious interrupt. - * - * Read the interrupt status register (ISR). If the most - * significant bit is not set then there is no valid - * interrupt. - */ - if(~in8(0x20)&0x80) { - irq = -1; - } - } - - return irq; -} -int i8259_get_irq(struct pt_regs *regs) -{ - unsigned char irq; - - /* - * Perform an interrupt acknowledge cycle on controller 1 - */ - out8(OCW3_1, 0x0C); /* prepare for poll */ - irq = in8(IPL_1) & 7; - if (irq == 2) { - /* - * Interrupt is cascaded so perform interrupt - * acknowledge on controller 2 - */ - out8(OCW3_2, 0x0C); /* prepare for poll */ - irq = (in8(IPL_2) & 7) + 8; - if (irq == 15) { - /* - * This may be a spurious interrupt - * - * Read the interrupt status register. If the most - * significant bit is not set then there is no valid - * interrupt - */ - out8(OCW3_2, 0x0b); - if (~(in8(ISR_2) & 0x80)) { - return -1; - } - } - } else if (irq == 7) { - /* - * This may be a spurious interrupt - * - * Read the interrupt status register. If the most - * significant bit is not set then there is no valid - * interrupt - */ - out8(OCW3_1, 0x0b); - if (~(in8(ISR_1) & 0x80)) { - return -1; - } - } - return irq; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -void i8259_mask_and_ack(int irq) -{ - if (irq > 7) { - cached_imr2 |= (1 << (irq - 8)); - in8(IMR_2); /* DUMMY */ - out8(IMR_2, cached_imr2); - out8(OCW2_2, 0x20); /* Non-specific EOI */ - out8(OCW2_1, 0x20); /* Non-specific EOI to cascade */ - } else { - cached_imr1 |= (1 << irq); - in8(IMR_1); /* DUMMY */ - out8(IMR_1, cached_imr1); - out8(OCW2_1, 0x20); /* Non-specific EOI */ - } -} - -void i8259_mask_irq(int irq) -{ - if (irq & 8) { - cached_imr2 |= (1 << (irq & 7)); - out8(IMR_2, cached_imr2); - } else { - cached_imr1 |= (1 << irq); - out8(IMR_1, cached_imr1); - } -} - -void i8259_unmask_irq(int irq) -{ - if (irq & 8) { - cached_imr2 &= ~(1 << (irq & 7)); - out8(IMR_2, cached_imr2); - } else { - cached_imr1 &= ~(1 << irq); - out8(IMR_1, cached_imr1); - } -} diff --git a/board/MAI/AmigaOneG3SE/i8259.h b/board/MAI/AmigaOneG3SE/i8259.h deleted file mode 100644 index eb08e13..0000000 --- a/board/MAI/AmigaOneG3SE/i8259.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * (C) Copyright 2002 - * John W. Linville, linville(a)tuxdriver.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#define ICW1_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1 -#define ICW1_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1 -#define ICW2_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2 -#define ICW2_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2 -#define ICW3_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3 -#define ICW3_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3 -#define ICW4_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4 -#define ICW4_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4 -#define OCW1_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1 -#define OCW1_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1 -#define OCW2_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2 -#define OCW2_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2 -#define OCW3_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3 -#define OCW3_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3 - -#define IMR_1 OCW1_1 -#define IMR_2 OCW1_2 - -#define ISR_1 ICW1_1 -#define ISR_2 ICW1_2 - -#define IPL_1 ICW1_1 -#define IPL_2 ICW1_2 - -extern void i8259_init(void); - -extern int i8259_get_irq(struct pt_regs *regs); - -extern void i8259_mask_and_ack(int irq); - -extern void i8259_mask_irq(int irq); - -extern void i8259_unmask_irq(int irq); diff --git a/board/MAI/AmigaOneG3SE/interrupts.c b/board/MAI/AmigaOneG3SE/interrupts.c deleted file mode 100644 index de46d6e..0000000 --- a/board/MAI/AmigaOneG3SE/interrupts.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * (C) Copyright 2002 - * John W. Linville <linville(a)tuxdriver.com> - * - * Copied and modified from original code by Josh Huber. Original - * copyright notice preserved below. - * - * (C) Copyright 2001 - * Josh Huber <huber(a)mclx.com>, Mission Critical Linux, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * interrupts.c - just enough support for the decrementer/timer - */ - -#include <common.h> -#include <asm/processor.h> -#include <command.h> -#include "i8259.h" - -#undef DEBUG -#ifdef DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif -#define NR_IRQS 16 - -void irq_alloc_init(void); -long irq_alloc(long wanted); - -/****************************************************************************/ - -unsigned decrementer_count; /* count value for 1e6/HZ microseconds */ - -struct irq_action { - interrupt_handler_t *handler; - void *arg; - ulong count; -}; - -static struct irq_action irq_handlers[NR_IRQS]; - -/****************************************************************************/ - -static __inline__ unsigned long -get_msr(void) -{ - unsigned long msr; - - asm volatile("mfmsr %0" : "=r" (msr) :); - return msr; -} - -static __inline__ void -set_msr(unsigned long msr) -{ - asm volatile("mtmsr %0" : : "r" (msr)); -} - -static __inline__ unsigned long -get_dec(void) -{ - unsigned long val; - - asm volatile("mfdec %0" : "=r" (val) :); - return val; -} - - -static __inline__ void -set_dec(unsigned long val) -{ - asm volatile("mtdec %0" : : "r" (val)); -} - - -void -enable_interrupts(void) -{ - set_msr (get_msr() | MSR_EE); -} - -/* returns flag if MSR_EE was set before */ -int -disable_interrupts(void) -{ - ulong msr; - - msr = get_msr(); - set_msr (msr & ~MSR_EE); - return ((msr & MSR_EE) != 0); -} - -/****************************************************************************/ - -int interrupt_init (void) -{ - extern void new_reset(void); - extern void new_reset_end(void); -#ifdef DEBUG - puts("interrupt_init: setting decrementer_count\n"); -#endif - decrementer_count = get_tbclk() / CONFIG_SYS_HZ; - -#ifdef DEBUG - puts("interrupt_init: setting actual decremter\n"); -#endif - set_dec (get_tbclk() / CONFIG_SYS_HZ); - -#ifdef DEBUG - puts("interrupt_init: clearing external interrupt table\n"); -#endif - /* clear external interrupt table here */ - memset(irq_handlers, 0, sizeof(irq_handlers)); - -#ifdef DEBUG - puts("interrupt_init: initializing interrupt controller\n"); -#endif - i8259_init(); - -#ifdef DEBUG - puts("Copying reset trampoline\n"); -#endif - /* WARNING: Assmues that the first megabyte is CACHEINHIBIT! */ - memcpy((void *)0x100, new_reset, new_reset_end - new_reset); - -#ifdef DEBUG - PRINTF("interrupt_init: enabling interrupts (msr = %08x)\n", - get_msr()); -#endif - set_msr (get_msr() | MSR_EE); - -#ifdef DEBUG - PRINTF("interrupt_init: done. (msr = %08x)\n", get_msr()); -#endif - -} - -/****************************************************************************/ - -/* - * Handle external interrupts - */ -void -external_interrupt(struct pt_regs *regs) -{ - extern int i8259_irq(void); - - int irq, unmask = 1; - - irq = i8259_irq(); /*i8259_get_irq(regs); */ -/* printf("irq = %d, handler at %p ack=%d\n", irq, irq_handlers[irq].handler, *(volatile unsigned char *)0xFEF00000); */ - i8259_mask_and_ack(irq); - - if (irq_handlers[irq].handler != NULL) - (*irq_handlers[irq].handler)(irq_handlers[irq].arg); - else { - PRINTF ("\nBogus External Interrupt IRQ %d\n", irq); - /* - * turn off the bogus interrupt, otherwise it - * might repeat forever - */ - unmask = 0; - } - - if (unmask) i8259_unmask_irq(irq); -} - -volatile ulong timestamp = 0; - -/* - * timer_interrupt - gets called when the decrementer overflows, - * with interrupts disabled. - * Trivial implementation - no need to be really accurate. - */ -void -timer_interrupt(struct pt_regs *regs) -{ - set_dec(decrementer_count); - timestamp++; -} - -/****************************************************************************/ - -void -reset_timer(void) -{ - timestamp = 0; -} - -ulong -get_timer(ulong base) -{ - return (timestamp - base); -} - -void -set_timer(ulong t) -{ - timestamp = t; -} - -/****************************************************************************/ - -/* - * Install and free a interrupt handler. - */ - -void -irq_install_handler(int irq, interrupt_handler_t *handler, void *arg) -{ - if (irq < 0 || irq >= NR_IRQS) { - PRINTF("irq_install_handler: bad irq number %d\n", irq); - return; - } - - if (irq_handlers[irq].handler != NULL) - PRINTF("irq_install_handler: 0x%08lx replacing 0x%08lx\n", - (ulong)handler, (ulong)irq_handlers[irq].handler); - - irq_handlers[irq].handler = handler; - irq_handlers[irq].arg = arg; - - i8259_unmask_irq(irq); -} - -void -irq_free_handler(int irq) -{ - if (irq < 0 || irq >= NR_IRQS) { - PRINTF("irq_free_handler: bad irq number %d\n", irq); - return; - } - - i8259_mask_irq(irq); - - irq_handlers[irq].handler = NULL; - irq_handlers[irq].arg = NULL; -} - -/****************************************************************************/ - -void -do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) -{ - puts("IRQ related functions are unimplemented currently.\n"); -} diff --git a/board/MAI/AmigaOneG3SE/macros.h b/board/MAI/AmigaOneG3SE/macros.h deleted file mode 100644 index 6020d7e..0000000 --- a/board/MAI/AmigaOneG3SE/macros.h +++ /dev/null @@ -1,84 +0,0 @@ - -#ifndef _MACROS_H -#define _MACROS_H - - /* - ** Load a long integer into a register - */ - .macro liw reg, value - lis \reg, \value@h - ori \reg, \reg, \value@l - .endm - - - /* - ** Generate config_addr request - ** This macro expects the values in registers: - ** r3 - bus - ** r4 - devfn - ** r5 - offset - */ - .macro config_addr - rlwinm r9, r5, 24, 0, 6 - rlwinm r8, r4, 16, 0, 31 - rlwinm r7, r3, 8, 0, 31 - or r9, r8, r9 - or r9, r7, r9 - ori r9, r9, 0x80 - liw r10, 0xfec00cf8 - stw r9, 0(r10) - eieio - sync - .endm - - - /* - ** Generate config_data address - */ - .macro config_data mask - andi. r9, r5, \mask - addi r9, r9, 0xcfc - oris r9, r9, 0xfee0 - .endm - - - /* - ** Write a byte value to an output port - */ - .macro outb port, value - lis r2, 0xfe00 - li r0, \value - stb r0, \port(r2) - .endm - - - /* - ** Write a register byte value to an output port - */ - .macro outbr port, value - lis r2, 0xfe00 - stb \value, \port(r2) - .endm - - - /* - ** Read a byte value from a port into a specified register - */ - .macro inb reg, port - lis r2, 0xfe00 - lbz \reg, \port(r2) - .endm - - - /* - ** Write a byte to the SuperIO config area - */ - .macro siowb offset, value - li r3, 0 - li r4, (7<<3) - li r5, \offset - li r6, \value - bl pci_write_cfg_byte - .endm - -#endif diff --git a/board/MAI/AmigaOneG3SE/memio.S b/board/MAI/AmigaOneG3SE/memio.S deleted file mode 100644 index 980d343..0000000 --- a/board/MAI/AmigaOneG3SE/memio.S +++ /dev/null @@ -1,67 +0,0 @@ -#include "macros.h" - - - .globl pci_read_cfg_byte - -pci_read_cfg_byte: - config_addr - config_data 3 - eieio - sync - lbz r3, 0(r9) - blr - - - .globl pci_write_cfg_byte - -pci_write_cfg_byte: - config_addr - config_data 3 - stb r6, 0(r9) - eieio - sync - blr - - - .globl pci_read_cfg_word - -pci_read_cfg_word: - config_addr - config_data 2 - lhbrx r3, 0, r9 - eieio - sync - blr - - - .globl pci_write_cfg_word - -pci_write_cfg_word: - config_addr - config_data 2 - sthbrx r6, 0, r9 - eieio - sync - blr - - - .globl pci_read_cfg_long - -pci_read_cfg_long: - config_addr - config_data 0 - lwbrx r3, 0, r9 - eieio - sync - blr - - - .globl pci_write_cfg_long - -pci_write_cfg_long: - config_addr - config_data 0 - stwbrx r6, 0, r9 - eieio - sync - blr diff --git a/board/MAI/AmigaOneG3SE/memio.h b/board/MAI/AmigaOneG3SE/memio.h deleted file mode 100644 index f5ce303..0000000 --- a/board/MAI/AmigaOneG3SE/memio.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Memory mapped IO - * - * (C) Copyright 2002 - * Hyperion Entertainment, ThomasF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * You may also use this under a BSD license. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - */ - -#ifndef _MEMIO_H -#define _MEMIO_H - -#include "short_types.h" - -#define IOBASE 0xFE000000 - -#define in_byte(from) read_byte( (uint8 *)(IOBASE | (from))) -#define in_word(from) read_word_little((uint16 *)(IOBASE | (from))) -#define in_long(from) read_long_little((uint32 *)(IOBASE | (from))) -#define out_byte(to, val) write_byte((uint8 *)(IOBASE | (to)), val) -#define out_word(to, val) write_word_little((uint16 *)(IOBASE | (to)), val) -#define out_long(to, val) write_long_little((uint32 *)(IOBASE | (to)), val) - - -static inline uint8 read_byte(volatile uint8 *from) -{ - int x; - asm volatile ("lbz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from)); - return (uint8)x; -} - - -static inline void write_byte(volatile uint8 *to, uint8 x) -{ - asm volatile ("stb %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x)); -} - -static inline uint16 read_word_little(volatile uint16 *from) -{ - int x; - asm volatile ("lhbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m" (*from)); - return (uint16)x; -} - -static inline uint16 read_word_big(volatile uint16 *from) -{ - int x; - asm volatile ("lhz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from)); - return (uint16)x; -} - -static inline void write_word_little(volatile uint16 *to, int x) -{ - asm volatile ("sthbrx %1,0,%2\n eieio\n sync" : "=m" (*to) : "r" (x), "r" (to)); -} - -static inline void write_word_big(volatile uint16 *to, int x) -{ - asm volatile ("sth %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x)); -} - -static inline uint32 read_long_little(volatile uint32 *from) -{ - unsigned long x; - asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from)); - return (uint32)x; -} - -static inline uint32 read_long_big(volatile uint32 *from) -{ - unsigned long x; - asm volatile ("lwz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from)); - return (uint32)x; -} - -static inline void write_long_little(volatile uint32 *to, uint32 x) -{ - asm volatile ("stwbrx %1,0,%2\n eieio\n sync" : "=m" (*to) : "r" (x), "r" (to)); -} - -static inline void write_long_big(volatile uint32 *to, uint32 x) -{ - asm volatile ("stw %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x)); -} - -#define CONFIG_ADDR(bus, devfn, offset) \ - write_long_big((uint32 *)0xFEC00CF8, \ - ((offset & 0xFC)<<24) | (devfn << 16) \ - | (bus<<8) | 0x80); -#define CONFIG_DATA(offset,mask) ((void *)(0xFEE00CFC+(offset & mask))) - - -uint8 pci_read_cfg_byte(int32 bus, int32 devfn, int32 offset); -void pci_write_cfg_byte(int32 bus, int32 devfn, int32 offset, uint8 x); -uint16 pci_read_cfg_word(int32 bus, int32 devfn, int32 offset); -void pci_write_cfg_word(int32 bus, int32 devfn, int32 offset, uint16 x); -uint32 pci_read_cfg_long(int32 bus, int32 devfn, int32 offset); -void pci_write_cfg_long(int32 bus, int32 devfn, int32 offset, uint32 x); - - -#endif diff --git a/board/MAI/AmigaOneG3SE/memory_dump b/board/MAI/AmigaOneG3SE/memory_dump deleted file mode 100644 index 65e7936..0000000 --- a/board/MAI/AmigaOneG3SE/memory_dump +++ /dev/null @@ -1,30 +0,0 @@ -64 MB: -0x00: 80 08 04 0c 09 01 40 00 01 a0 60 00 80 08 00 01 -0x10: 8f 04 04 01 01 00 06 a0 60 00 00 14 10 14 2d 10 -0x20: 20 10 20 10 00 00 00 00 00 00 00 00 00 00 00 00 -0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 f2 -0x40: 7f 61 00 00 00 00 00 00 46 04 00 ff ff ff ff ff -0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff -0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff -0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 64 f4 - -512 MB: -0x00: 80 08 04 0d 0a 02 40 00 01 75 54 00 82 08 00 01 -0x10: 8f 04 04 01 01 00 0f 00 00 00 00 14 0f 14 2d 40 -0x20: 15 08 15 08 00 00 00 00 00 00 00 00 00 00 00 00 -0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 d2 -0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 fd - -256 MB: -0x00: 80 08 04 0c 0a 02 40 00 01 75 54 00 80 08 00 01 -0x10: 8f 04 06 01 01 00 0e a0 60 00 00 14 0f 14 2d 20 -0x20: 15 08 15 08 00 00 00 00 00 00 00 00 00 00 00 00 -0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 b0 -0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 f6 - diff --git a/board/MAI/AmigaOneG3SE/nvram.c b/board/MAI/AmigaOneG3SE/nvram.c deleted file mode 100644 index d37eec1..0000000 --- a/board/MAI/AmigaOneG3SE/nvram.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2002 - * Thomas Frieden, Hyperion Entertainment - * ThomasF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include "memio.h" - -void enable_nvram(void) -{ - pci_write_cfg_byte(0, 0, 0x56, 0x0b); -} - -void disable_nvram(void) -{ - pci_write_cfg_byte(0, 0, 0x56, 0x0); -} diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c deleted file mode 100644 index aa164b0..0000000 --- a/board/MAI/AmigaOneG3SE/ps2kbd.c +++ /dev/null @@ -1,685 +0,0 @@ -/* - * (C) Copyright 2002 - * John W. Linville, linville(a)tuxdriver.com - * - * Modified from code for support of MIP405 and PIP405 boards. Previous - * copyright follows. - * - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland, d.peter(a)mpl.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - * Source partly derived from: - * linux/drivers/char/pc_keyb.c - * - * - */ -#include <common.h> -#include <asm/processor.h> -#include <stdio_dev.h> -#include "ps2kbd.h" - - -unsigned char kbd_read_status(void); -unsigned char kbd_read_input(void); -void kbd_send_data(unsigned char data); -void i8259_mask_irq(unsigned int irq); -void i8259_unmask_irq(unsigned int irq); - -/* used only by send_data - set by keyboard_interrupt */ - - -#undef KBG_DEBUG - -#ifdef KBG_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -#define KBD_STAT_KOBF 0x01 -#define KBD_STAT_IBF 0x02 -#define KBD_STAT_SYS 0x04 -#define KBD_STAT_CD 0x08 -#define KBD_STAT_LOCK 0x10 -#define KBD_STAT_MOBF 0x20 -#define KBD_STAT_TI_OUT 0x40 -#define KBD_STAT_PARERR 0x80 - -#define KBD_INIT_TIMEOUT 2000 /* Timeout in ms for initializing the keyboard */ -#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */ -#define KBD_TIMEOUT 2000 /* Timeout in ms for keyboard command acknowledge */ -/* - * Keyboard Controller Commands - */ - -#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ -#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ -#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ -#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ -#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ -#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ -#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ -#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ -#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ -#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ -#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if - initiated by the auxiliary device */ -#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ - -/* - * Keyboard Commands - */ - -#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ -#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ -#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ -#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */ -#define KBD_CMD_RESET 0xFF /* Reset */ - -/* - * Keyboard Replies - */ - -#define KBD_REPLY_POR 0xAA /* Power on reset */ -#define KBD_REPLY_ACK 0xFA /* Command ACK */ -#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ - -/* - * Status Register Bits - */ - -#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ -#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ -#define KBD_STAT_SELFTEST 0x04 /* Self test successful */ -#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ -#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ -#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ -#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ -#define KBD_STAT_PERR 0x80 /* Parity error */ - -#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF) - -/* - * Controller Mode Register Bits - */ - -#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ -#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ -#define KBD_MODE_SYS 0x04 /* The system flag (?) */ -#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ -#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ -#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ -#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ -#define KBD_MODE_RFU 0x80 - - -#define KDB_DATA_PORT 0x60 -#define KDB_COMMAND_PORT 0x64 - -#define LED_SCR 0x01 /* scroll lock led */ -#define LED_CAP 0x04 /* caps lock led */ -#define LED_NUM 0x02 /* num lock led */ - -#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */ - - -static volatile char kbd_buffer[KBD_BUFFER_LEN]; -static volatile int in_pointer = 0; -static volatile int out_pointer = 0; - - -static unsigned char num_lock = 0; -static unsigned char caps_lock = 0; -static unsigned char scroll_lock = 0; -static unsigned char shift = 0; -static unsigned char ctrl = 0; -static unsigned char alt = 0; -static unsigned char e0 = 0; -static unsigned char leds = 0; - -#define DEVNAME "ps2kbd" - -/* Simple translation table for the keys */ - -static unsigned char kbd_plain_xlate[] = { - 0xff,0x1b, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=','\b','\t', /* 0x00 - 0x0f */ - 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']','\r',0xff, 'a', 's', /* 0x10 - 0x1f */ - 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';','\'', '`',0xff,'\\', 'z', 'x', 'c', 'v', /* 0x20 - 0x2f */ - 'b', 'n', 'm', ',', '.', '/',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */ - 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */ - '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */ - '\r',0xff,0xff - }; - -static unsigned char kbd_shift_xlate[] = { - 0xff,0x1b, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+','\b','\t', /* 0x00 - 0x0f */ - 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}','\r',0xff, 'A', 'S', /* 0x10 - 0x1f */ - 'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',0xff, '|', 'Z', 'X', 'C', 'V', /* 0x20 - 0x2f */ - 'B', 'N', 'M', '<', '>', '?',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */ - 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */ - '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */ - '\r',0xff,0xff - }; - -static unsigned char kbd_ctrl_xlate[] = { - 0xff,0x1b, '1',0x00, '3', '4', '5',0x1E, '7', '8', '9', '0',0x1F, '=','\b','\t', /* 0x00 - 0x0f */ - 0x11,0x17,0x05,0x12,0x14,0x18,0x15,0x09,0x0f,0x10,0x1b,0x1d,'\n',0xff,0x01,0x13, /* 0x10 - 0x1f */ - 0x04,0x06,0x08,0x09,0x0a,0x0b,0x0c, ';','\'', '~',0x00,0x1c,0x1a,0x18,0x03,0x16, /* 0x20 - 0x2f */ - 0x02,0x0e,0x0d, '<', '>', '?',0xff,0xff,0xff,0x00,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */ - 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */ - '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */ - '\r',0xff,0xff - }; - -/****************************************************************** - * Init - ******************************************************************/ - -int isa_kbd_init (void) -{ - char *result; - - result = kbd_initialize (); - if (result != NULL) { - result = kbd_initialize (); - } - if (result == NULL) { - printf ("AT Keyboard initialized\n"); - irq_install_handler (KBD_INTERRUPT, - (interrupt_handler_t *) kbd_interrupt, - NULL); - return (1); - } else { - printf ("%s\n", result); - return (-1); - } -} - -#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -extern int overwrite_console (void); -#else -int overwrite_console (void) -{ - return (0); -} -#endif - -int drv_isa_kbd_init (void) -{ - int error; - struct stdio_dev kbddev ; - char *stdinname = getenv ("stdin"); - - if(isa_kbd_init() == -1) - return -1; - memset (&kbddev, 0, sizeof(kbddev)); - strcpy(kbddev.name, DEVNAME); - kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; - kbddev.putc = NULL ; - kbddev.puts = NULL ; - kbddev.getc = kbd_getc ; - kbddev.tstc = kbd_testc ; - - error = stdio_register (&kbddev); - if(error==0) { - /* check if this is the standard input device */ - if(strcmp(stdinname,DEVNAME)==0) { - /* reassign the console */ - if(overwrite_console()) { - return 1; - } - error=console_assign(stdin,DEVNAME); - if(error==0) - return 1; - else - return error; - } - return 1; - } - return error; -} - -/****************************************************************** - * Queue handling - ******************************************************************/ -/* puts character in the queue and sets up the in and out pointer */ -void kbd_put_queue(char data) -{ - if((in_pointer+1)==KBD_BUFFER_LEN) { - if(out_pointer==0) { - return; /* buffer full */ - } else{ - in_pointer=0; - } - } else { - if((in_pointer+1)==out_pointer) - return; /* buffer full */ - in_pointer++; - } - kbd_buffer[in_pointer]=data; - return; -} - -/* test if a character is in the queue */ -int kbd_testc(void) -{ - if(in_pointer==out_pointer) - return(0); /* no data */ - else - return(1); -} -/* gets the character from the queue */ -int kbd_getc(void) -{ - char c; - - while(in_pointer==out_pointer); - if((out_pointer+1)==KBD_BUFFER_LEN) - out_pointer=0; - else - out_pointer++; - c=kbd_buffer[out_pointer]; - return (int)c; - -} - -/* set LEDs */ - -void kbd_set_leds(void) -{ - if(caps_lock==0) - leds&=~LED_CAP; /* switch caps_lock off */ - else - leds|=LED_CAP; /* switch on LED */ - if(num_lock==0) - leds&=~LED_NUM; /* switch LED off */ - else - leds|=LED_NUM; /* switch on LED */ - if(scroll_lock==0) - leds&=~LED_SCR; /* switch LED off */ - else - leds|=LED_SCR; /* switch on LED */ - kbd_send_data(KBD_CMD_SET_LEDS); - kbd_send_data(leds); -} - -void handle_keyboard_event (unsigned char scancode) -{ - unsigned char keycode; - - /* Convert scancode to keycode */ - PRINTF ("scancode %x\n", scancode); - if (scancode == 0xe0) { - e0 = 1; /* special charakters */ - return; - } - if (e0 == 1) { - e0 = 0; /* delete flag */ - if (!(((scancode & 0x7F) == 0x38) || /* the right ctrl key */ - ((scancode & 0x7F) == 0x1D) || /* the right alt key */ - ((scancode & 0x7F) == 0x35) || /* the right '/' key */ - ((scancode & 0x7F) == 0x1C) || /* the right enter key */ - ((scancode) == 0x48) || /* arrow up */ - ((scancode) == 0x50) || /* arrow down */ - ((scancode) == 0x4b) || /* arrow left */ - ((scancode) == 0x4d))) - /* arrow right */ - /* we swallow unknown e0 codes */ - return; - } - /* special cntrl keys */ - switch (scancode) { - case 0x48: - kbd_put_queue (27); - kbd_put_queue (91); - kbd_put_queue ('A'); - return; - case 0x50: - kbd_put_queue (27); - kbd_put_queue (91); - kbd_put_queue ('B'); - return; - case 0x4b: - kbd_put_queue (27); - kbd_put_queue (91); - kbd_put_queue ('D'); - return; - case 0x4D: - kbd_put_queue (27); - kbd_put_queue (91); - kbd_put_queue ('C'); - return; - case 0x58: /* F12 key */ - if (ctrl == 1) { - extern int console_changed; - - setenv ("stdin", DEVNAME); - setenv ("stdout", "vga"); - console_changed = 1; - } - return; - case 0x2A: - case 0x36: /* shift pressed */ - shift = 1; - return; /* do nothing else */ - case 0xAA: - case 0xB6: /* shift released */ - shift = 0; - return; /* do nothing else */ - case 0x38: /* alt pressed */ - alt = 1; - return; /* do nothing else */ - case 0xB8: /* alt released */ - alt = 0; - return; /* do nothing else */ - case 0x1d: /* ctrl pressed */ - ctrl = 1; - return; /* do nothing else */ - case 0x9d: /* ctrl released */ - ctrl = 0; - return; /* do nothing else */ - case 0x46: /* scrollock pressed */ - scroll_lock = ~scroll_lock; - kbd_set_leds (); - return; /* do nothing else */ - case 0x3A: /* capslock pressed */ - caps_lock = ~caps_lock; - kbd_set_leds (); - return; - case 0x45: /* numlock pressed */ - num_lock = ~num_lock; - kbd_set_leds (); - return; - case 0xC6: /* scroll lock released */ - case 0xC5: /* num lock released */ - case 0xBA: /* caps lock released */ - return; /* just swallow */ - } - if ((scancode & 0x80) == 0x80) /* key released */ - return; - /* now, decide which table we need */ - if (scancode > (sizeof (kbd_plain_xlate) / sizeof (kbd_plain_xlate[0]))) { /* scancode not in list */ - PRINTF ("unkown scancode %X\n", scancode); - return; /* swallow it */ - } - /* setup plain code first */ - keycode = kbd_plain_xlate[scancode]; - if (caps_lock == 1) { /* caps_lock is pressed, overwrite plain code */ - if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */ - PRINTF ("unkown caps-locked scancode %X\n", scancode); - return; /* swallow it */ - } - keycode = kbd_shift_xlate[scancode]; - if (keycode < 'A') { /* we only want the alphas capital */ - keycode = kbd_plain_xlate[scancode]; - } - } - if (shift == 1) { /* shift overwrites caps_lock */ - if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */ - PRINTF ("unkown shifted scancode %X\n", scancode); - return; /* swallow it */ - } - keycode = kbd_shift_xlate[scancode]; - } - if (ctrl == 1) { /* ctrl overwrites caps_lock and shift */ - if (scancode > (sizeof (kbd_ctrl_xlate) / sizeof (kbd_ctrl_xlate[0]))) { /* scancode not in list */ - PRINTF ("unkown ctrl scancode %X\n", scancode); - return; /* swallow it */ - } - keycode = kbd_ctrl_xlate[scancode]; - } - /* check if valid keycode */ - if (keycode == 0xff) { - PRINTF ("unkown scancode %X\n", scancode); - return; /* swallow unknown codes */ - } - - kbd_put_queue (keycode); - PRINTF ("%x\n", keycode); -} - -/* - * This reads the keyboard status port, and does the - * appropriate action. - * - */ -unsigned char handle_kbd_event (void) -{ - unsigned char status = kbd_read_status (); - unsigned int work = 10000; - - while ((--work > 0) && (status & KBD_STAT_OBF)) { - unsigned char scancode; - - scancode = kbd_read_input (); - - /* Error bytes must be ignored to make the - Synaptics touchpads compaq use work */ - /* Ignore error bytes */ - if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) { - if (status & KBD_STAT_MOUSE_OBF); /* not supported: handle_mouse_event(scancode); */ - else - handle_keyboard_event (scancode); - } - status = kbd_read_status (); - } - if (!work) - PRINTF ("pc_keyb: controller jammed (0x%02X).\n", status); - return status; -} - -/****************************************************************************** - * Lowlevel Part of keyboard section - */ -unsigned char kbd_read_status(void) -{ - return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT)); -} - -unsigned char kbd_read_input(void) -{ - return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT)); -} - -void kbd_write_command(unsigned char cmd) -{ - out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd); -} - -void kbd_write_output(unsigned char data) -{ - out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data); -} - -int kbd_read_data(void) -{ - int val; - unsigned char status; - - val = -1; - status = kbd_read_status(); - if (status & KBD_STAT_OBF) { - val = kbd_read_input(); - if (status & (KBD_STAT_GTO | KBD_STAT_PERR)) - val = -2; - } - return val; -} - -int kbd_wait_for_input (void) -{ - unsigned long timeout; - int val; - - timeout = KBD_TIMEOUT; - val = kbd_read_data (); - while (val < 0) { - if (timeout-- == 0) - return -1; - udelay (1000); - val = kbd_read_data (); - } - return val; -} - - -int kb_wait (void) -{ - unsigned long timeout = KBC_TIMEOUT * 10; - - do { - unsigned char status = handle_kbd_event (); - - if (!(status & KBD_STAT_IBF)) - return 0; /* ok */ - udelay (1000); - timeout--; - } while (timeout); - return 1; -} - -void kbd_write_command_w (int data) -{ - if (kb_wait ()) - PRINTF ("timeout in kbd_write_command_w\n"); - kbd_write_command (data); -} - -void kbd_write_output_w (int data) -{ - if (kb_wait ()) - PRINTF ("timeout in kbd_write_output_w\n"); - kbd_write_output (data); -} - -void kbd_send_data (unsigned char data) -{ - unsigned char status; - - i8259_mask_irq (KBD_INTERRUPT); /* disable interrupt */ - kbd_write_output_w (data); - status = kbd_wait_for_input (); - if (status == KBD_REPLY_ACK) - i8259_unmask_irq (KBD_INTERRUPT); /* enable interrupt */ -} - - -char *kbd_initialize (void) -{ - int status; - - in_pointer = 0; /* delete in Buffer */ - out_pointer = 0; - /* - * Test the keyboard interface. - * This seems to be the only way to get it going. - * If the test is successful a x55 is placed in the input buffer. - */ - kbd_write_command_w (KBD_CCMD_SELF_TEST); - if (kbd_wait_for_input () != 0x55) - return "Kbd: failed self test"; - /* - * Perform a keyboard interface test. This causes the controller - * to test the keyboard clock and data lines. The results of the - * test are placed in the input buffer. - */ - kbd_write_command_w (KBD_CCMD_KBD_TEST); - if (kbd_wait_for_input () != 0x00) - return "Kbd: interface failed self test"; - /* - * Enable the keyboard by allowing the keyboard clock to run. - */ - kbd_write_command_w (KBD_CCMD_KBD_ENABLE); - status = kbd_wait_for_input (); - /* - * Reset keyboard. If the read times out - * then the assumption is that no keyboard is - * plugged into the machine. - * This defaults the keyboard to scan-code set 2. - * - * Set up to try again if the keyboard asks for RESEND. - */ - do { - kbd_write_output_w (KBD_CMD_RESET); - status = kbd_wait_for_input (); - if (status == KBD_REPLY_ACK) - break; - if (status != KBD_REPLY_RESEND) { - PRINTF ("status: %X\n", status); - return "Kbd: reset failed, no ACK"; - } - } while (1); - if (kbd_wait_for_input () != KBD_REPLY_POR) - return "Kbd: reset failed, no POR"; - - /* - * Set keyboard controller mode. During this, the keyboard should be - * in the disabled state. - * - * Set up to try again if the keyboard asks for RESEND. - */ - do { - kbd_write_output_w (KBD_CMD_DISABLE); - status = kbd_wait_for_input (); - if (status == KBD_REPLY_ACK) - break; - if (status != KBD_REPLY_RESEND) - return "Kbd: disable keyboard: no ACK"; - } while (1); - - kbd_write_command_w (KBD_CCMD_WRITE_MODE); - kbd_write_output_w (KBD_MODE_KBD_INT - | KBD_MODE_SYS - | KBD_MODE_DISABLE_MOUSE | KBD_MODE_KCC); - - /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */ - kbd_write_command_w (KBD_CCMD_READ_MODE); - if (!(kbd_wait_for_input () & KBD_MODE_KCC)) { - /* - * If the controller does not support conversion, - * Set the keyboard to scan-code set 1. - */ - kbd_write_output_w (0xF0); - kbd_wait_for_input (); - kbd_write_output_w (0x01); - kbd_wait_for_input (); - } - kbd_write_output_w (KBD_CMD_ENABLE); - if (kbd_wait_for_input () != KBD_REPLY_ACK) - return "Kbd: enable keyboard: no ACK"; - - /* - * Finally, set the typematic rate to maximum. - */ - kbd_write_output_w (KBD_CMD_SET_RATE); - if (kbd_wait_for_input () != KBD_REPLY_ACK) - return "Kbd: Set rate: no ACK"; - kbd_write_output_w (0x00); - if (kbd_wait_for_input () != KBD_REPLY_ACK) - return "Kbd: Set rate: no ACK"; - return NULL; -} - -void kbd_interrupt(void) -{ - handle_kbd_event(); -} diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.h b/board/MAI/AmigaOneG3SE/ps2kbd.h deleted file mode 100644 index fc5c422..0000000 --- a/board/MAI/AmigaOneG3SE/ps2kbd.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2002 - * John W. Linville, linville(a)tuxdriver.com - * - * Modified from code for support of MIP405 and PIP405 boards. Previous - * copyright follows. - * - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland, d.peter(a)mpl.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#ifndef _KBD_H_ -#define _KBD_H_ - -extern int kbd_testc(void); -extern int kbd_getc(void); -extern void kbd_interrupt(void); -extern char *kbd_initialize(void); - -unsigned char kbd_is_init(void); -#define KBD_INTERRUPT 1 -#endif diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c deleted file mode 100644 index 84a913e..0000000 --- a/board/MAI/AmigaOneG3SE/serial.c +++ /dev/null @@ -1,245 +0,0 @@ -#include <common.h> -#include <ns16550.h> -#include "short_types.h" -#include "memio.h" -#include "articiaS.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_NS16550 -static uint32 ComPort1; - -uint16 SerialEcho = 1; - - -#define RECEIVER_HOLDING 0 -#define TRANSMITTER_HOLDING 0 -#define INTERRUPT_ENABLE 1 -#define INTERRUPT_STATUS 2 -#define FIFO_CONTROL 2 -#define LINE_CONTROL 3 -#define MODEM_CONTROL 4 -#define LINE_STATUS 5 -#define MODEM_STATUS 6 -#define SCRATCH_PAD 7 - -#define DIVISOR_LATCH_LSB 0 -#define DIVISOR_LATCH_MSB 1 -#define PRESCALER_DIVISION 5 - -#define COM_WRITE_BYTE(reg, byte) out_byte((ComPort1+reg), byte) -#define COM_READ_BYTE(reg) in_byte((ComPort1+reg)) - -static int serial_init_done = 0; - -void serial_init (void) -{ -#if 0 - uint32 clock_divisor = 115200 / baudrate; - uint8 cfg; - uint8 a; - uint16 devfn = 7 << 3; - - if (serial_init_done) - return; - - /* Enter configuration mode */ - cfg = pci_read_cfg_byte (0, devfn, 0x85); - pci_write_cfg_byte (0, devfn, 0x85, cfg | 0x02); - - /* Set serial port COM1 as 3F8 */ - out_byte (0x3F0, 0xE7); - out_byte (0x3f1, 0xfe); - - /* Set serial port COM2 as 2F8 */ - out_byte (0x3f0, 0xe8); - out_byte (0x3f1, 0xeb); - - /* Enable */ - out_byte (0x3f0, 0xe2); - a = in_byte (0x3f1); - a |= 0xc; - out_byte (0x3f0, 0xe2); - out_byte (0x3f1, a); - - /* Reset the configuration mode */ - pci_write_cfg_byte (0, devfn, 0x85, cfg); -#endif - - ComPort1 = 0x3F8; - - /* Disable interrupts */ - COM_WRITE_BYTE (INTERRUPT_ENABLE, 0x00); - - /* Set baud rate */ - /* COM_WRITE_BYTE(LINE_CONTROL, 0x83); */ - /* COM_WRITE_BYTE(DIVISOR_LATCH_LSB, (uint8)(clock_divisor & 0xFF)); */ - /* COM_WRITE_BYTE(DIVISOR_LATCH_MSB, (uint8)(clock_divisor >> 8)); */ - /* __asm__("eieio"); */ - - /* Set 8-N-1 */ - COM_WRITE_BYTE (LINE_CONTROL, 0x03); - __asm__ ("eieio"); - - /* Disable FIFO */ - COM_WRITE_BYTE (MODEM_CONTROL, 0x03); - COM_WRITE_BYTE (FIFO_CONTROL, 0x07); - - __asm__ ("eieio"); - serial_init_done = 1; -} - -extern int console_changed; - -void serial_putc (const char sendme) -{ - if (sendme == '\n') { - while ((in_byte (0x3FD) & 0x40) == 0); - out_byte (0x3f8, 0x0D); - } - - while ((in_byte (0x3FD) & 0x40) == 0); - out_byte (0x3f8, sendme); -} - -int serial_getc (void) -{ -#if 0 - uint8 c; - - for (;;) { - uint8 x = in_byte (0x3FD); - - if (x & 0x01) - break; - - if (x & 0x0C) - out_byte (0x3fd, 0x0c); - } - - c = in_byte (0x3F8); - - return c; -#else - while ((in_byte (0x3FD) & 0x01) == 0) { - if (console_changed != 0) { - printf ("Console changed\n"); - console_changed = 0; - return 0; - } - } - return in_byte (0x3F8); -#endif -} - -int serial_tstc (void) -{ - return (in_byte (0x03FD) & 0x01) != 0; -} - -void serial_debug_putc (int c) -{ - serial_puts ("DBG"); - serial_putc (c); - serial_putc (0x0d); - serial_putc (0x0A); -} - -#else - -const NS16550_t Com0 = (NS16550_t) CONFIG_SYS_NS16550_COM1; -const NS16550_t Com1 = (NS16550_t) CONFIG_SYS_NS16550_COM2; - -int serial_init (void) -{ - uint32 clock_divisor = 115200 / gd->baudrate; - - NS16550_init (Com0, clock_divisor); - /* NS16550_reinit(Com1, clock_divisor); */ - /* serial_puts("COM1: 3F8h initalized"); */ - - return (0); -} - -#if 0 -void serial_putc (const char c) -{ - NS16550_putc (Com0, c); - if (c == '\n') - NS16550_putc (Com0, 0x0D); -} - -int serial_getc (void) -{ - return (int) NS16550_getc (Com0); -} - -int serial_tstc (void) -{ - return NS16550_tstc (Com0); -} -#else -void serial_putc (const char sendme) -{ - if (sendme == '\n') { - while ((in_byte (0x3FD) & 0x40) == 0); - out_byte (0x3f8, 0x0D); - } - - while ((in_byte (0x3FD) & 0x40) == 0); - out_byte (0x3f8, sendme); -} - - -extern int console_changed; - -int serial_getc (void) -{ -#if 0 - uint8 c; - - for (;;) { - uint8 x = in_byte (0x3FD); - - if (x & 0x01) - break; - - if (x & 0x0C) - out_byte (0x3fd, 0x0c); - } - - c = in_byte (0x3F8); - - return c; -#else - while ((in_byte (0x3FD) & 0x01) == 0) { - if (console_changed != 0) { - console_changed = 0; - return 0; - } - } - - return in_byte (0x3F8); -#endif -} - -int serial_tstc (void) -{ - return (in_byte (0x03FD) & 0x01) != 0; -} -#endif - -#endif - -void serial_puts (const char *string) -{ - while (*string) - serial_putc (*string++); -} - -void serial_setbrg (void) -{ - uint32 clock_divisor = 115200 / gd->baudrate; - - NS16550_init (Com0, clock_divisor); -} diff --git a/board/MAI/AmigaOneG3SE/short_types.h b/board/MAI/AmigaOneG3SE/short_types.h deleted file mode 100644 index 1840d28..0000000 --- a/board/MAI/AmigaOneG3SE/short_types.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * short type names - * - * (C) Copyright 2002 - * Hyperion Entertainment, ThomasF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _SHORT_TYPES_H -#define _SHORT_TYPES_H - -typedef unsigned long uint32; -typedef long int32; -typedef unsigned short uint16; -typedef short int16; -typedef unsigned char uint8; -typedef signed char int8; - -#endif diff --git a/board/MAI/AmigaOneG3SE/smbus.c b/board/MAI/AmigaOneG3SE/smbus.c deleted file mode 100644 index de13977..0000000 --- a/board/MAI/AmigaOneG3SE/smbus.c +++ /dev/null @@ -1,206 +0,0 @@ -#include "memio.h" -#include "articiaS.h" - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef TRUE -#define TRUE 1 -#endif - - -void sm_write_mode(void) -{ - out_byte(0xA539, 0x00); - out_byte(0xA53A, 0x03); -} - -void sm_read_mode(void) -{ - out_byte(0xA53A, 0x02); - out_byte(0xA539, 0x02); -} - -void sm_write_byte(uint8 writeme) -{ - int i; - int level; - - out_byte(0xA539, 0x00); - - level = 0; - - for (i=0; i<8; i++) - { - if ((writeme & 0x80) == (level<<7)) - { - /* Bit did not change, rewrite strobe */ - out_byte(0xA539, level | 0x02); - out_byte(0xA539, level); - } - else - { - /* Bit changed, set bit, then strobe */ - level = (writeme & 0x80) >> 7; - out_byte(0xA539, level); - out_byte(0xA539, level | 0x02); - out_byte(0xA539, level); - } - writeme <<= 1; - } - out_byte(0xA539, 0x00); -} - -uint8 sm_read_byte(void) -{ - uint8 retme, r; - int i; - - retme = 0; - for (i=0; i<8; i++) - { - retme <<= 1; - out_byte(0xA539, 0x00); - out_byte(0xA539, 0x02); - r = in_byte(0xA538) & 0x01; - retme |= r; - } - - return retme; -} - -int sm_get_ack(void) -{ - uint8 r; - r = in_byte(0xA538); - if ((r&0x01) == 0) return TRUE; - else return FALSE; -} - -void sm_write_ack(void) -{ - out_byte(0xA539, 0x00); - out_byte(0xA539, 0x02); - out_byte(0xA539, 0x00); -} - -void sm_write_nack(void) -{ - out_byte(0xA539, 0x01); - out_byte(0xA539, 0x03); - out_byte(0xA539, 0x01); -} - -void sm_send_start(void) -{ - out_byte(0xA539, 0x03); - out_byte(0xA539, 0x02); -} - -void sm_send_stop(void) -{ - out_byte(0xA539, 0x02); - out_byte(0xA539, 0x03); -} - -int sm_read_byte_from_device(uint8 addr, uint8 reg, uint8 *storage) -{ - /* S Addr Wr */ - sm_write_mode(); - sm_send_start(); - sm_write_byte((addr<<1)); - - /* [A] */ - sm_read_mode(); - if (sm_get_ack() == FALSE) return FALSE; - - /* Comm */ - sm_write_mode(); - sm_write_byte(reg); - - /* [A] */ - sm_read_mode(); - if (sm_get_ack() == FALSE) return FALSE; - - /* S Addr Rd */ - sm_write_mode(); - sm_send_start(); - sm_write_byte((addr<<1)|1); - - /* [A] */ - sm_read_mode(); - if (sm_get_ack() == FALSE) return FALSE; - - /* [Data] */ - *storage = sm_read_byte(); - - /* NA */ - sm_write_mode(); - sm_write_nack(); - sm_send_stop(); - - return TRUE; -} - -void sm_init(void) -{ - /* Switch to PMC mode */ - pci_write_cfg_byte(0, 0, REG_GROUP, (uint8)(REG_GROUP_SPECIAL|REG_GROUP_POWER)); - - /* Set GPIO Base */ - pci_write_cfg_long(0, 0, 0x40, 0xa500); - - /* Enable GPIO */ - pci_write_cfg_byte(0, 0, 0x44, 0x11); - - /* Set both GPIO 0 and 1 as output */ - out_byte(0xA53A, 0x03); -} - - -void sm_term(void) -{ - /* Switch to normal mode */ - pci_write_cfg_byte(0, 0, REG_GROUP, 0); -} - - -int sm_get_data(uint8 *DataArray, int dimm_socket) -{ - int j; - -#if 0 - /* Switch to PMC mode */ - pci_write_cfg_byte(0, 0, REG_GROUP, (uint8)(REG_GROUP_SPECIAL|REG_GROUP_POWER)); - - /* Set GPIO Base */ - pci_write_cfg_long(0, 0, 0x40, 0xa500); - - /* Enable GPIO */ - pci_write_cfg_byte(0, 0, 0x44, 0x11); - - /* Set both GPIO 0 and 1 as output */ - out_byte(0xA53A, 0x03); -#endif - - sm_init(); - /* Start reading the rom */ - - j = 0; - - do - { - if (sm_read_byte_from_device(dimm_socket, (uint8)j, DataArray) == FALSE) - { - sm_term(); - return FALSE; - } - - DataArray++; - j++; - } while (j < 128); - - sm_term(); - return TRUE; -} diff --git a/board/MAI/AmigaOneG3SE/smbus.h b/board/MAI/AmigaOneG3SE/smbus.h deleted file mode 100644 index beeb6a0..0000000 --- a/board/MAI/AmigaOneG3SE/smbus.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _SMBUS_H_ -#define _SMBUS_H_ - -#include "short_types.h" - -#define SM_DIMM0_ADDR 0x51 -#define SM_DIMM1_ADDR 0x52 - -void sm_write_mode(void); -void sm_read_mode(void); -void sm_write_byte(uint8 writeme); -uint8 sm_read_byte(void); -int sm_get_ack(void); -void sm_write_ack(void); -void sm_write_nack(void); -void sm_send_start(void); -void sm_send_stop(void); -int sm_read_byte_from_device(uint8 addr, uint8 reg, uint8 *storage); -int sm_get_data(uint8 *DataArray, int dimm_socket); -void sm_init(void); -void sm_term(void); -#endif diff --git a/board/MAI/AmigaOneG3SE/start.txt b/board/MAI/AmigaOneG3SE/start.txt deleted file mode 100644 index 2526ed2..0000000 --- a/board/MAI/AmigaOneG3SE/start.txt +++ /dev/null @@ -1,198 +0,0 @@ - - /*------------------------------------------------------*/ - /* TERON Articia / SDRAM Init */ - /*------------------------------------------------------*/ - -* XD_CTL = 0x81000000 (0x74) - -* HBUS_ACC_CTL_0 &= 0xFFFFFDFF (0x5c) - /* host bus access ctl reg 2(5e) */ - /* set - CPU read from memory data one clock after data is latched */ - -* GLOBL_INFO_0 |= 0x00004000 (0x50) - /* global info register 2 (52), AGP/PCI bus 1 arbiter is addressed in Articia S */ - - PCI_1_SB_CONFIG_0 |= 0x00000400 (0x80d0) - /* PCI1 side band config reg 2 (d2), enable read acces while write buffer not empty */ - - MEM_RAS_CTL_0 |= 0x3f000000 (0xcc) - &= 0x3fffffff - /* RAS park control reg 0(cc), park access enable is set */ - - HOST_RDBUF_CTL |= 0x10000000 (0x70) - &= 0x10ffffff - /* host read buffer control reg, enable prefetch for CPU read from DRAM control */ - - HBUS_ACC_CTL_0 |= 0x0100001f (0x5c) - &= 0xf1ffffff - /* host bus access control register, enable CPU address bus pipe control */ - /* two outstanding requests, *** changed to 2 from 3 */ - /* enable line merge write control for CPU write to system memory, PCI 1 */ - /* and PCI 0 bus memory; enable page merge write control for write to */ - /* PCI bus 0 & bus 1 memory */ - - SRAM_CTL |= 0x00004000 (0xc8) - &= 0xffbff7ff - /* DRAM detail timing control register 1 (ca), bit 3 set to 0 */ - /* DRAM start access latency control - wait for one clock */ - /* ff9f changed to ffbf */ - - DIM0_TIM_CTL_0 = 0x737d737d (0xc9) - /* DRAM timing control for dimm0 & dimm1; set wait one clock */ - /* cycle for next data access */ - - DIM2_TIM_CTL_0 = 0x737d737d (0xca) - /* DRAM timing control for dimm2 & dimm3; set wait one clock */ - /* cycle for next data access */ - - DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB (0x90) - /* set dimm0 bank0 for 128 MB */ - - DIM0_BNK1_CTL_0 = BNK1_RAM_SIZ_128MB (0x94) - /* set dimm0 for bank1 */ - - DIM0_TIM_CTL_0 = 0xf3bf0000 (0xc9) - /* dimm0 timing control register; RAS - CAS latency - 4 clock */ - /* CAS access latency - 3 wait; pre-charge latency - 3 wait */ - /* pre-charge command period control - 5 clock; wait one clock */ - /* cycle for next data access; read to write access latency control */ - /* - 2 clock cycles */ - - DRAM_GBL_CTL_0 |= 0x00000100 (0xc0) - &= 0xffff01ff - /* memory global control register - support buffer sdram on bank 0 */ - - DRAM_ECC_CTL_0 |= 0x00260000 (0xc4) - &= 0xff26ffff - /* enable ECC; enable read, modify, write control */ - - DRAM_REF_CTL_0 = DRAM_REF_DATA (0xb8) - /* set DRAM refresh parameters *** changed to 00940100 */ - - nop - nop - nop - nop - nop - - DRAM_ECC_CTL_0 |= 0x20243280 (0xc4) - /* turn off ecc */ - /* for SDRAM bank 0 */ - - DRAM_ECC_CTL_0 |= 0x20243290 (0xc4) ? - /* for SDRAM bank 1 */ - - -/* Additional Stuff...*/ - - GLOBL_CTRL |= 0x20000b00 (0x54) - - PCI_0_SB_CONFIG |= 0x04100007 (0xd0) - /* PCI 0 Side band config reg*/ - - 0x8000083c |= 0x00080000 - /* Disable VGA decode on PCI Bus 1 */ - - -/*End Additional Stuff..*/ - - /*--------------------------------------------------------------*/ - /* TERON serial port initialization code */ - /*--------------------------------------------------------------*/ - - 0x84380080 |= 0x00030000 - /* enable super IO configuration VIA chip Register 85 */ - /* Enable super I/O config mode */ - - 0xfe0003f0 = 0xe2 - bl delay1 - - 0xfe0003f1 = 0x0f - bl delay1 - /* enable com1 & com2, parallel port disabled */ - - 0xfe0003f0 = 0xe7 - bl delay1 - /* let's make com1 base as 0x3f8 */ - - 0xfe0003f1 = 0xfe - bl delay1 - - 0xfe0003f0 = 0xe8 - bl delay1 - /* let's make com2 base as 0x2f8 */ - - 0xfe0003f1 = 0xbe - - 0x84380080 &= 0xfffdffff - /* closing super IO configuration VIA chip Register 85 */ - - -/* -------------------------------*/ - - 0xfe0003fb = 0x83 - bl delay1 - /*latch enable word length -8 bit */ /* set mslab bit */ - 0xfe0003f8 = 0x0c - bl delay1 - /* set baud rate lsb for 9600 baud */ - 0xfe0003f9 = 0x0 - bl delay1 - /* set baud rate msb for 9600 baud */ - 0xfe0003fb = 0x03 - bl delay1 - /* reset mslab */ - - /*--------------------------------------------------------------*/ - /* END TERON Serial Port Initialization Code */ - /*--------------------------------------------------------------*/ - - - /*--------------------------------------------------------------*/ - /* END TERON Articia / SDRAM Initialization code */ - /*--------------------------------------------------------------*/ - -Proposed from Documentation: - -write dmem 0xfec00cf8 0x50000080 -write dmem 0xfee00cfc 0xc0305411 - - Writes to index 0x50-0x53. - 0x50: Global Information Register 0 - 0xC0 = Little Endian CPU, Sequential order Burst - 0x51: Global Information Register 1 - Read only, 0x30 = Provides PowerPC and X86 support - 0x52: Global Information Register 2 - 0x05 = 64/128 bit CPU bus support - 0x53: Global Information Register 3 - 0x80 = PCI Bus 0 grant active time is 1 clock after REQ# deasserted - -write dmem 0xfec00cf8 0x5c000080 -write dmem 0xfee00cfc 0xb300011F - -write dmem 0xfec00cf8 0xc8000080 -write dmem 0xfee00cfc 0x0020f100 - -write dmem 0xfec00cf8 0x90000080 -write dmem 0xfee00cfc 0x007fe700 - -write dmem 0xfec00cf8 0x9400080 -write dmem 0xfee00cfc 0x007fe700 - -write dmem 0xfec00cf8 0xb0000080 -write dmem 0xfee00cfc 0x737d737d - -write dmem 0xfec00cf8 0xb4000080 -write dmem 0xfee00cfc 0x737d737d - -write dmem 0xfec00cf8 0xc0000080 -write dmem 0xfee00cfc 0x40005500 - -write dmem 0xfec00cf8 0xb8000080 -write dmem 0xfee00cfc 0x00940100 - -write dmem 0xfec00cf8 0xc4000080 -write dmem 0xfee00cfc 0x00003280 - -write dmem 0xfec00cf8 0xc4000080 -write dmem 0xfee00cfc 0x00003290 diff --git a/board/MAI/AmigaOneG3SE/todo.txt b/board/MAI/AmigaOneG3SE/todo.txt deleted file mode 100644 index df25e3d..0000000 --- a/board/MAI/AmigaOneG3SE/todo.txt +++ /dev/null @@ -1,3 +0,0 @@ -- Init interrupt controller -- init sdram -- init ide controller \ No newline at end of file diff --git a/board/MAI/AmigaOneG3SE/u-boot.lds b/board/MAI/AmigaOneG3SE/u-boot.lds deleted file mode 100644 index e86ac56..0000000 --- a/board/MAI/AmigaOneG3SE/u-boot.lds +++ /dev/null @@ -1,136 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber(a)mclx.com>, Mission Critical Linux, Inc. - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * u-boot.lds - linker script for U-Boot on the AmigaOneG3SE Board. - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/74xx_7xx/start.o (.text) -/* store the environment in a seperate sector in the boot flash */ -/* . = env_offset; */ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = ALIGN(4) /*.*/ ; - PROVIDE (end = ALIGN(4) /*.*/); -} diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c deleted file mode 100644 index 857ab3e..0000000 --- a/board/MAI/AmigaOneG3SE/usb_uhci.c +++ /dev/null @@ -1,1178 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Note: Part of this code has been derived from linux - * - */ - -/********************************************************************** - * How it works: - * ------------- - * The framelist / Transfer descriptor / Queue Heads are similar like - * in the linux usb_uhci.c. - * - * During initialization, the following skeleton is allocated in init_skel: - * - * framespecific | common chain - * - * framelist[] - * [ 0 ]-----> TD ---------\ - * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL - * ... TD ---------/ - * [1023]-----> TD --------/ - * - * ^^ ^^ ^^ ^^ ^^ - * 7 TDs for 1 TD for Start of Start of End Chain - * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain - * - * - * Since this is a bootloader, the isochronous transfer descriptor have been removed. - * - * Interrupt Transfers. - * -------------------- - * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They - * will be inserted after the appropriate (depending the interval setting) skeleton TD. - * If an interrupt has been detected the dev->irqhandler is called. The status and number - * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the - * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, - * the interrupt TD will be reactivated. - * - * Control Transfers - * ----------------- - * Control Transfers are issued by filling the tmp_td with the appropriate data and connect - * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued, - * the programm has to wait for completion. This does not allows asynchronous data transfer. - * - * Bulk Transfers - * -------------- - * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect - * them to the qh_bulk queue header. Before other control/bulk transfers can be issued, - * the programm has to wait for completion. This does not allows asynchronous data transfer. - * - * - */ - -#include <common.h> -#include <pci.h> - -#ifdef CONFIG_USB_UHCI - -#include <usb.h> -#include "usb_uhci.h" - -#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */ -#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */ - - -/*#define USB_UHCI_DEBUG */ - -#ifdef USB_UHCI_DEBUG -#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define USB_UHCI_PRINTF(fmt,args...) -#endif - - -static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */ -unsigned int usb_base_addr; /* base address */ - -static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */ -static uhci_qh_t qh_cntrl; /* control Queue Head */ -static uhci_qh_t qh_bulk; /* bulk Queue Head */ -static uhci_qh_t qh_end; /* end Queue Head */ -static uhci_td_t td_last; /* last TD (linked with end chain) */ - -/* temporary tds */ -static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */ -static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */ - -static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */ - -static struct virt_root_hub rh; /* struct for root hub */ - -/********************************************************************** - * some forward decleration - */ -int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int transfer_len,struct devrequest *setup); - -/* fill a td with the approproiate data. Link, status, info and buffer - * are used by the USB controller itselfes, dev is used to identify the - * "connected" device - */ -void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status, - unsigned long info, unsigned long buffer, unsigned long dev) -{ - td->link=swap_32(link); - td->status=swap_32(status); - td->info=swap_32(info); - td->buffer=swap_32(buffer); - td->dev_ptr=dev; -} - -/* fill a qh with the approproiate data. Head and element are used by the USB controller - * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh. - * Please note, that after completion of the td chain, the entry element is removed / - * marked invalid by the USB controller. - */ -void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element) -{ - qh->head=swap_32(head); - qh->element=swap_32(element); - qh->dev_ptr=0L; -} - -/* get the status of a td->status - */ -unsigned long usb_uhci_td_stat(unsigned long status) -{ - unsigned long result=0; - result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0; - result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0; - result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0; - result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0; - result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0; - result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0; - result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0; - return result; -} - -/* get the status and the transfered len of a td chain. - * called from the completion handler - */ -int usb_get_td_status(uhci_td_t *td,struct usb_device *dev) -{ - unsigned long temp,info; - unsigned long stat; - uhci_td_t *mytd=td; - - if(dev->devnum==rh.devnum) - return 0; - dev->act_len=0; - stat=0; - do { - temp=swap_32((unsigned long)mytd->status); - stat=usb_uhci_td_stat(temp); - info=swap_32((unsigned long)mytd->info); - if(((info & 0xff)!= USB_PID_SETUP) && - (((info >> 21) & 0x7ff)!= 0x7ff) && - (temp & 0x7FF)!=0x7ff) - { /* if not setup and not null data pack */ - dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ - } - if(stat) { /* status no ok */ - dev->status=stat; - return -1; - } - temp=swap_32((unsigned long)mytd->link); - mytd=(uhci_td_t *)(temp & 0xfffffff0); - }while((temp & 0x1)==0); /* process all TDs */ - dev->status=stat; - return 0; /* Ok */ -} - - -/*------------------------------------------------------------------- - * LOW LEVEL STUFF - * assembles QHs und TDs for control, bulk and iso - *-------------------------------------------------------------------*/ - -/* Submits a control message. That is a Setup, Data and Status transfer. - * Routine does not wait for completion. - */ -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len,struct devrequest *setup) -{ - unsigned long destination, status; - int maxsze = usb_maxpacket(dev, pipe); - unsigned long dataptr; - int len; - int pktsze; - int i=0; - - if (!maxsze) { - USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe); - return -1; - } - if(((pipe>>8)&0x7f)==rh.devnum) { - /* this is the root hub -> redirect it */ - return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup); - } - USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze); - /* The "pipe" thing contains the destination in bits 8--18 */ - destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */ - /* 3 errors */ - status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); - /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */ - /* Build the TD for the control request, try forever, 8 bytes of data */ - usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev); -#if 0 - { - char *sp=(char *)setup; - printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe, - sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]); - } -#endif - dataptr = (unsigned long)buffer; - len=transfer_len; - - /* If direction is "send", change the frame from SETUP (0x2D) - to OUT (0xE1). Else change it from SETUP to IN (0x69). */ - destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN); - while (len > 0) { - /* data stage */ - pktsze = len; - i++; - if (pktsze > maxsze) - pktsze = maxsze; - destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */ - usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ - tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); - - dataptr += pktsze; - len -= pktsze; - } - - /* Build the final TD for control status */ - /* It's only IN if the pipe is out AND we aren't expecting data */ - - destination &= ~UHCI_PID; - if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0)) - destination |= USB_PID_IN; - else - destination |= USB_PID_OUT; - destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */ - i++; - status &=~TD_CTRL_SPD; - /* no limit on errors on final packet , 0 bytes of data */ - usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev); - tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */ - /* usb_show_td(i+1);*/ - USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i); - /* first mark the control QH element terminated */ - qh_cntrl.element=0xffffffffL; - /* set qh active */ - qh_cntrl.dev_ptr=(unsigned long)dev; - /* fill in tmp_td_chain */ - qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]); - return 0; -} - -/*------------------------------------------------------------------- - * Prepare TDs for bulk transfers. - */ -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len) -{ - unsigned long destination, status,info; - unsigned long dataptr; - int maxsze = usb_maxpacket(dev, pipe); - int len; - int i=0; - - if(transfer_len < 0) { - printf("Negative transfer length in submit_bulk\n"); - return -1; - } - if (!maxsze) - return -1; - /* The "pipe" thing contains the destination in bits 8--18. */ - destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe); - /* 3 errors */ - status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); - /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */ - /* Build the TDs for the bulk request */ - len = transfer_len; - dataptr = (unsigned long)buffer; - do { - int pktsze = len; - if (pktsze > maxsze) - pktsze = maxsze; - /* pktsze bytes of data */ - info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) | - (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE); - - if((len-pktsze)==0) - status |= TD_CTRL_IOC; /* last one generates INT */ - - usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ - if(i>0) - tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); - i++; - dataptr += pktsze; - len -= pktsze; - usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); - } while (len > 0); - /* first mark the bulk QH element terminated */ - qh_bulk.element=0xffffffffL; - /* set qh active */ - qh_bulk.dev_ptr=(unsigned long)dev; - /* fill in tmp_td_chain */ - qh_bulk.element=swap_32((unsigned long)&tmp_td[0]); - return 0; -} - - -/* search a free interrupt td - */ -uhci_td_t *uhci_alloc_int_td(void) -{ - int i; - for(i=0;i<USB_MAX_TEMP_INT_TD;i++) { - if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */ - return &tmp_int_td[i]; - } - return NULL; -} - -#if 0 -void uhci_show_temp_int_td(void) -{ - int i; - for(i=0;i<USB_MAX_TEMP_INT_TD;i++) { - if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */ - printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr); - } - printf("all others temp_tds are free\n"); -} -#endif -/*------------------------------------------------------------------- - * submits USB interrupt (ie. polling ;-) - */ -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval) -{ - int nint, n; - unsigned long status, destination; - unsigned long info,tmp; - uhci_td_t *mytd; - if (interval < 0 || interval >= 256) - return -1; - - if (interval == 0) - nint = 0; - else { - for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */ - { - if(interval < n) { - interval = n / 2; - break; - } - } - nint--; - } - - USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint); - mytd=uhci_alloc_int_td(); - if(mytd==NULL) { - printf("No free INT TDs found\n"); - return -1; - } - status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27); -/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27); -*/ - - destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21); - - info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE); - tmp = swap_32(td_int[nint].link); - usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev); - /* Link it */ - tmp = swap_32((unsigned long)mytd); - td_int[nint].link=tmp; - - usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); - - return 0; -} - -/********************************************************************** - * Low Level functions - */ - - -void reset_hc(void) -{ - - /* Global reset for 100ms */ - out16r( usb_base_addr + USBPORTSC1,0x0204); - out16r( usb_base_addr + USBPORTSC2,0x0204); - out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS); - /* Turn off all interrupts */ - out16r(usb_base_addr + USBINTR,0); - wait_ms(50); - out16r( usb_base_addr + USBCMD,0); - wait_ms(10); -} - -void start_hc(void) -{ - int timeout = 1000; - - while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) { - if (!--timeout) { - printf("USBCMD_HCRESET timed out!\n"); - break; - } - } - /* Turn on all interrupts */ - out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP); - /* Start at frame 0 */ - out16r(usb_base_addr + USBFRNUM,0); - /* set Framebuffer base address */ - out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist); - /* Run and mark it configured with a 64-byte max packet */ - out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP); -} - -/* Initialize the skeleton - */ -void usb_init_skel(void) -{ - unsigned long temp; - int n; - - for(n=0;n<USB_MAX_TEMP_INT_TD;n++) - tmp_int_td[n].dev_ptr=0L; /* no devices connected */ - /* last td */ - usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L); - /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */ - /* End Queue Header */ - usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last); - /* Bulk Queue Header */ - temp=(unsigned long)&qh_end; - usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM); - /* Control Queue Header */ - temp=(unsigned long)&qh_bulk; - usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM); - /* 1ms Interrupt td */ - temp=(unsigned long)&qh_cntrl; - usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L); - temp=(unsigned long)&td_int[0]; - for(n=1; n<8; n++) - usb_fill_td(&td_int[n],temp,0,0,0,0L); - for (n = 0; n < 1024; n++) { - /* link all framelist pointers to one of the interrupts */ - int m, o; - if ((n&127)==127) - framelist[n]= swap_32((unsigned long)&td_int[0]); - else - for (o = 1, m = 2; m <= 128; o++, m += m) - if ((n & (m - 1)) == ((m - 1) / 2)) - framelist[n]= swap_32((unsigned long)&td_int[o]); - } -} - -/* check the common skeleton for completed transfers, and update the status - * of the "connected" device. Called from the IRQ routine. - */ -void usb_check_skel(void) -{ - struct usb_device *dev; - /* start with the control qh */ - if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */ - { - dev=(struct usb_device *)qh_cntrl.dev_ptr; - usb_get_td_status(&tmp_td[0],dev); /* update status */ - if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ - qh_cntrl.dev_ptr=0; - } - } - /* now process the bulk */ - if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */ - { - dev=(struct usb_device *)qh_bulk.dev_ptr; - usb_get_td_status(&tmp_td[0],dev); /* update status */ - if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ - qh_bulk.dev_ptr=0; - } - } -} - -/* check the interrupt chain, ubdate the status of the appropriate device, - * call the appropriate irqhandler and reactivate the TD if the irqhandler - * returns with 1 - */ -void usb_check_int_chain(void) -{ - int i,res; - unsigned long link,status; - struct usb_device *dev; - uhci_td_t *td,*prevtd; - - for(i=0;i<8;i++) { - prevtd = &td_int[i]; /* the first previous td is the skeleton td */ - link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ - td=(uhci_td_t *)link; /* assign it */ - /* all interrupt TDs are finally linked to the td_int[0]. - * so we process all until we find the td_int[0]. - * if int0 chain points to a QH, we're also done - */ - while(((i>0) && (link != (unsigned long)&td_int[0])) || - ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH))) - { - /* check if a device is assigned with this td */ - status=swap_32(td->status); - if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) { - /* td is not active and a device is assigned -> call irqhandler */ - dev=(struct usb_device *)td->dev_ptr; - dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ - dev->irq_status=usb_uhci_td_stat(status); /* get status */ - res=dev->irq_handle(dev); /* call irqhandler */ - if(res==1) { - /* reactivate */ - status|=TD_CTRL_ACTIVE; - td->status=swap_32(status); - prevtd=td; /* previous td = this td */ - } - else { - prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */ - /* remove device pointer */ - td->dev_ptr=0L; - } - } /* if we call the irq handler */ - link=swap_32(td->link) & 0xfffffff0; /* next in chain */ - td=(uhci_td_t *)link; /* assign it */ - } /* process all td in this int chain */ - } /* next interrupt chain */ -} - - -/* usb interrupt service routine. - */ -void handle_usb_interrupt(void) -{ - unsigned short status; - - /* - * Read the interrupt status, and write it back to clear the - * interrupt cause - */ - - status = in16r(usb_base_addr + USBSTS); - - if (!status) /* shared interrupt, not mine */ - return; - if (status != 1) { - /* remove host controller halted state */ - if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) { - out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD)); - } - } - usb_check_int_chain(); /* call interrupt handlers for int tds */ - usb_check_skel(); /* call completion handler for common transfer routines */ - out16r(usb_base_addr+USBSTS,status); -} - - -/* init uhci - */ -int usb_lowlevel_init(void) -{ - unsigned char temp; - int busdevfunc; -/* - * HJF - configure IRQ and base from variables optionally. - */ - char *s; - - - busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */ - if(busdevfunc == -1) { - printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID); - return -1; - } - -#if 1 - s = getenv("usb_irq"); - if (s) - { - temp = atoi(s); - pci_write_config_byte(busdevfunc, PCI_INTERRUPT_LINE, temp); - } - else -#endif - pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp); - - s = getenv("usb_base"); - if (s) - { - unsigned long temp2; - temp2 = atoi(s); - pci_write_config_dword(busdevfunc, PCI_BASE_ADDRESS_4, temp2|0x01); - } - - irqvec = temp; - irq_free_handler(irqvec); - USB_UHCI_PRINTF("Interrupt Line = %d\n",irqvec); - pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp); - USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp); - pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr); - USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr); - usb_base_addr&=0xFFFFFFF0; - usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS; - rh.devnum = 0; - usb_init_skel(); - reset_hc(); - start_hc(); - irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL); - irq_install_handler(0, (interrupt_handler_t *)handle_usb_interrupt, NULL); - - return 0; -} - -/* stop uhci - */ -int usb_lowlevel_stop(void) -{ - if(irqvec == -1) - return 1; - irq_free_handler(irqvec); - irq_free_handler(0); - reset_hc(); - irqvec = -1; - return 0; -} - -/******************************************************************************************* - * Virtual Root Hub - * Since the uhci does not have a real HUB, we simulate one ;-) - */ -#undef USB_RH_DEBUG - -#ifdef USB_RH_DEBUG -#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args) -static void usb_display_wValue(unsigned short wValue,unsigned short wIndex); -static void usb_display_Req(unsigned short req); -#else -#define USB_RH_PRINTF(fmt,args...) -static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {} -static void usb_display_Req(unsigned short req) {} -#endif - -static unsigned char root_hub_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x00, /* __u16 bcdUSB; v1.0 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x01, /* __u8 iManufacturer; */ - 0x00, /* __u8 iProduct; */ - 0x00, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - - -/* Configuration descriptor */ -static unsigned char root_hub_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - - -static unsigned char root_hub_hub_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x02, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -static unsigned char root_hub_str_index0[] = -{ - 0x04, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 0x09, /* __u8 lang ID */ - 0x04, /* __u8 lang ID */ -}; - -static unsigned char root_hub_str_index1[] = -{ - 28, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 'U', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'C', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'I', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'R', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 't', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'u', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'b', /* __u8 Unicode */ - 0, /* __u8 Unicode */ -}; - - -/* - * Root Hub Control Pipe (interrupt Pipes are not supported) - */ - - -int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd) -{ - void *data = buffer; - int leni = transfer_len; - int len = 0; - int status = 0; - int stat = 0; - int i; - - unsigned short cstatus; - - unsigned short bmRType_bReq; - unsigned short wValue; - unsigned short wIndex; - unsigned short wLength; - - if (usb_pipeint(pipe)) { - printf("Root-Hub submit IRQ: NOT implemented\n"); -#if 0 - uhci->rh.urb = urb; - uhci->rh.send = 1; - uhci->rh.interval = urb->interval; - rh_init_int_timer (urb); -#endif - return 0; - } - bmRType_bReq = cmd->requesttype | cmd->request << 8; - wValue = swap_16(cmd->value); - wIndex = swap_16(cmd->index); - wLength = swap_16(cmd->length); - usb_display_Req(bmRType_bReq); - for (i = 0; i < 8; i++) - rh.c_p_r[i] = 0; - USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n", - dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength); - - switch (bmRType_bReq) { - /* Request Destination: - without flags: Device, - RH_INTERFACE: interface, - RH_ENDPOINT: endpoint, - RH_CLASS means HUB here, - RH_OTHER | RH_CLASS almost ever means HUB_PORT here - */ - - case RH_GET_STATUS: - *(unsigned short *) data = swap_16(1); - len=2; - break; - case RH_GET_STATUS | RH_INTERFACE: - *(unsigned short *) data = swap_16(0); - len=2; - break; - case RH_GET_STATUS | RH_ENDPOINT: - *(unsigned short *) data = swap_16(0); - len=2; - break; - case RH_GET_STATUS | RH_CLASS: - *(unsigned long *) data = swap_32(0); - len=4; - break; /* hub power ** */ - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - - status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1)); - cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) | - ((status & USBPORTSC_PEC) >> (3 - 1)) | - (rh.c_p_r[wIndex - 1] << (0 + 4)); - status = (status & USBPORTSC_CCS) | - ((status & USBPORTSC_PE) >> (2 - 1)) | - ((status & USBPORTSC_SUSP) >> (12 - 2)) | - ((status & USBPORTSC_PR) >> (9 - 4)) | - (1 << 8) | /* power on ** */ - ((status & USBPORTSC_LSDA) << (-8 + 9)); - - *(unsigned short *) data = swap_16(status); - *(unsigned short *) (data + 2) = swap_16(cstatus); - len=4; - break; - case RH_CLEAR_FEATURE | RH_ENDPOINT: - switch (wValue) { - case (RH_ENDPOINT_STALL): - len=0; - break; - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - switch (wValue) { - case (RH_C_HUB_OVER_CURRENT): - len=0; /* hub power over current ** */ - break; - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - usb_display_wValue(wValue,wIndex); - switch (wValue) { - case (RH_PORT_ENABLE): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) & ~USBPORTSC_PE; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - case (RH_PORT_SUSPEND): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) & ~USBPORTSC_SUSP; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - case (RH_PORT_POWER): - len=0; /* port power ** */ - break; - case (RH_C_PORT_CONNECTION): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) | USBPORTSC_CSC; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - case (RH_C_PORT_ENABLE): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) | USBPORTSC_PEC; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - case (RH_C_PORT_SUSPEND): -/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ - len=0; - break; - case (RH_C_PORT_OVER_CURRENT): - len=0; - break; - case (RH_C_PORT_RESET): - rh.c_p_r[wIndex - 1] = 0; - len=0; - break; - } - break; - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - usb_display_wValue(wValue,wIndex); - switch (wValue) { - case (RH_PORT_SUSPEND): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) | USBPORTSC_SUSP; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - case (RH_PORT_RESET): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) | USBPORTSC_PR; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - wait_ms(10); - status = (status & 0xfff5) & ~USBPORTSC_PR; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - udelay(10); - status = (status & 0xfff5) | USBPORTSC_PE; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - wait_ms(10); - status = (status & 0xfff5) | 0xa; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - case (RH_PORT_POWER): - len=0; /* port power ** */ - break; - case (RH_PORT_ENABLE): - status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); - status = (status & 0xfff5) | USBPORTSC_PE; - out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); - len=0; - break; - } - break; - - case RH_SET_ADDRESS: - rh.devnum = wValue; - len=0; - break; - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case (0x01): /* device descriptor */ - i=sizeof(root_hub_config_des); - status=i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy (data, root_hub_dev_des, len); - break; - case (0x02): /* configuration descriptor */ - i=sizeof(root_hub_config_des); - status=i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy (data, root_hub_config_des, len); - break; - case (0x03): /*string descriptors */ - if(wValue==0x0300) { - i=sizeof(root_hub_str_index0); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy (data, root_hub_str_index0, len); - break; - } - if(wValue==0x0301) { - i=sizeof(root_hub_str_index1); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy (data, root_hub_str_index1, len); - break; - } - stat = USB_ST_STALLED; - } - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - root_hub_hub_des[2] = 2; - i=sizeof(root_hub_hub_des); - status= i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy (data, root_hub_hub_des, len); - break; - case RH_GET_CONFIGURATION: - *(unsigned char *) data = 0x01; - len = 1; - break; - case RH_SET_CONFIGURATION: - len=0; - break; - default: - stat = USB_ST_STALLED; - } - USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat, - in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2)); - dev->act_len=len; - dev->status=stat; - return stat; - -} - -/******************************************************************************** - * Some Debug Routines - */ - -#ifdef USB_RH_DEBUG - -static void usb_display_Req(unsigned short req) -{ - USB_RH_PRINTF("- Root-Hub Request: "); - switch (req) { - case RH_GET_STATUS: - USB_RH_PRINTF("Get Status "); - break; - case RH_GET_STATUS | RH_INTERFACE: - USB_RH_PRINTF("Get Status Interface "); - break; - case RH_GET_STATUS | RH_ENDPOINT: - USB_RH_PRINTF("Get Status Endpoint "); - break; - case RH_GET_STATUS | RH_CLASS: - USB_RH_PRINTF("Get Status Class"); - break; /* hub power ** */ - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - USB_RH_PRINTF("Get Status Class Others"); - break; - case RH_CLEAR_FEATURE | RH_ENDPOINT: - USB_RH_PRINTF("Clear Feature Endpoint "); - break; - case RH_CLEAR_FEATURE | RH_CLASS: - USB_RH_PRINTF("Clear Feature Class "); - break; - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - USB_RH_PRINTF("Clear Feature Other Class "); - break; - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - USB_RH_PRINTF("Set Feature Other Class "); - break; - case RH_SET_ADDRESS: - USB_RH_PRINTF("Set Address "); - break; - case RH_GET_DESCRIPTOR: - USB_RH_PRINTF("Get Descriptor "); - break; - case RH_GET_DESCRIPTOR | RH_CLASS: - USB_RH_PRINTF("Get Descriptor Class "); - break; - case RH_GET_CONFIGURATION: - USB_RH_PRINTF("Get Configuration "); - break; - case RH_SET_CONFIGURATION: - USB_RH_PRINTF("Get Configuration "); - break; - default: - USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req); - } - USB_RH_PRINTF("\n"); - -} - -static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) -{ - switch (wValue) { - case (RH_PORT_ENABLE): - USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex); - break; - case (RH_PORT_SUSPEND): - USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex); - break; - case (RH_PORT_POWER): - USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex); - break; - case (RH_C_PORT_CONNECTION): - USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex); - break; - case (RH_C_PORT_ENABLE): - USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex); - break; - case (RH_C_PORT_SUSPEND): - USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex); - break; - case (RH_C_PORT_OVER_CURRENT): - USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex); - break; - case (RH_C_PORT_RESET): - USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex); - break; - default: - USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex); - break; - } -} - -#endif - - -#ifdef USB_UHCI_DEBUG - -static int usb_display_td(uhci_td_t *td) -{ - unsigned long tmp; - int valid; - - printf("TD at %p:\n",td); - - tmp=swap_32(td->link); - printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0, - ((tmp & 0x4)==0x4) ? "Depth" : "Breath", - ((tmp & 0x2)==0x2) ? "QH" : "TD", - ((tmp & 0x1)==0x1) ? "invalid" : "valid"); - valid=((tmp & 0x1)==0x0); - tmp=swap_32(td->status); - printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n", - (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable", - ((tmp>>28)&0x3), - (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed", - (((tmp>>25)&0x1)==0x1) ? "ISO " : "", - (((tmp>>24)&0x1)==0x1) ? "IOC " : "", - (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ", - (((tmp>>22)&0x1)==0x1) ? "Stalled" : "", - (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "", - (((tmp>>20)&0x1)==0x1) ? "Babble" : "", - (((tmp>>19)&0x1)==0x1) ? "NAK" : "", - (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "", - (tmp&0x7ff)); - tmp=swap_32(td->info); - printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF)); - printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "", - ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF); - tmp=swap_32(td->buffer); - printf(" Buffer 0x%08lX\n",tmp); - printf(" DEV %08lX\n",td->dev_ptr); - return valid; -} - - -void usb_show_td(int max) -{ - int i; - if(max>0) { - for(i=0;i<max;i++) { - usb_display_td(&tmp_td[i]); - } - } - else { - i=0; - do { - printf("tmp_td[%d]\n",i); - }while(usb_display_td(&tmp_td[i++])); - } -} - - -#endif -#endif /* CONFIG_USB_UHCI */ - -/* EOF */ diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.h b/board/MAI/AmigaOneG3SE/usb_uhci.h deleted file mode 100644 index 3387157..0000000 --- a/board/MAI/AmigaOneG3SE/usb_uhci.h +++ /dev/null @@ -1,192 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Note: Part of this code has been derived from linux - * - */ -#ifndef _USB_UHCI_H_ -#define _USB_UHCI_H_ - -#undef USB_UHCI_VEND_ID -#define USB_UHCI_VEND_ID PCI_VENDOR_ID_VIA -#undef USB_UHCI_DEV_ID -#define USB_UHCI_DEV_ID 0x3038 - -/* Command register */ -#define USBCMD 0 -#define USBCMD_RS 0x0001 /* Run/Stop */ -#define USBCMD_HCRESET 0x0002 /* Host reset */ -#define USBCMD_GRESET 0x0004 /* Global reset */ -#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ -#define USBCMD_FGR 0x0010 /* Force Global Resume */ -#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ -#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ -#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ - -/* Status register */ -#define USBSTS 2 -#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ -#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ -#define USBSTS_RD 0x0004 /* Resume Detect */ -#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */ -#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */ -#define USBSTS_HCH 0x0020 /* HC Halted */ - -/* Interrupt enable register */ -#define USBINTR 4 -#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ -#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ -#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ -#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ - -#define USBFRNUM 6 -#define USBFLBASEADD 8 -#define USBSOF 12 - -/* USB port status and control registers */ -#define USBPORTSC1 16 -#define USBPORTSC2 18 -#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */ -#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ -#define USBPORTSC_PE 0x0004 /* Port Enable */ -#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ -#define USBPORTSC_LS 0x0030 /* Line Status */ -#define USBPORTSC_RD 0x0040 /* Resume Detect */ -#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ -#define USBPORTSC_PR 0x0200 /* Port Reset */ -#define USBPORTSC_SUSP 0x1000 /* Suspend */ - -/* Legacy support register */ -#define USBLEGSUP 0xc0 -#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ - -#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ -#define UHCI_PID 0xff /* PID MASK */ - -#define UHCI_PTR_BITS 0x000F -#define UHCI_PTR_TERM 0x0001 -#define UHCI_PTR_QH 0x0002 -#define UHCI_PTR_DEPTH 0x0004 - -/* for TD <status>: */ -#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ -#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ -#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ -#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ -#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ -#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ -#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ -#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ -#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ -#define TD_CTRL_NAK (1 << 19) /* NAK Received */ -#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ -#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ -#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ - -#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ - TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) - -#define TD_TOKEN_TOGGLE 19 - -/* ------------------------------------------------------------------------------------ - Virtual Root HUB - ------------------------------------------------------------------------------------ */ -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -/* Our Vendor Specific feature */ -#define RH_REMOVE_EP 0x00 - - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 - - -/* Transfer descriptor structure */ -typedef struct { - unsigned long link; /* next td/qh (LE)*/ - unsigned long status; /* status of the td */ - unsigned long info; /* Max Lenght / Endpoint / device address and PID */ - unsigned long buffer; /* pointer to data buffer (LE) */ - unsigned long dev_ptr; /* pointer to the assigned device (BE) */ - unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */ -} uhci_td_t, *puhci_td_t; - -/* Queue Header structure */ -typedef struct { - unsigned long head; /* Next QH (LE)*/ - unsigned long element; /* Queue element pointer (LE) */ - unsigned long res[5]; /* reserved */ - unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */ -} uhci_qh_t, *puhci_qh_t; - -struct virt_root_hub { - int devnum; /* Address of Root Hub endpoint */ - int numports; /* number of ports */ - int c_p_r[8]; /* C_PORT_RESET */ -}; - - -#endif /* _USB_UHCI_H_ */ diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c deleted file mode 100644 index 752a464..0000000 --- a/board/MAI/AmigaOneG3SE/via686.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2002 - * Hyperion Entertainment, Hans-JoergF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <pci.h> -#include <ata.h> -#include "memio.h" -#include "articiaS.h" -#include "via686.h" -#include "i8259.h" - -DECLARE_GLOBAL_DATA_PTR; - -#undef VIA_DEBUG - -#ifdef VIA_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - - -/* Setup the ISA-to-PCI host bridge */ -void via_isa_init(pci_dev_t dev, struct pci_config_table *table) -{ - char regval; - if (PCI_FUNC(dev) == 0) - { - PRINTF("... PCI-to-ISA bridge, dev=0x%X\n", dev); - - /* Enable I/O Recovery time */ - pci_write_config_byte(dev, 0x40, 0x08); - - /* Enable ISA refresh */ - pci_write_config_byte(dev, 0x41, 0x41); /* was 01 */ - - /* Enable ISA line buffer */ - pci_write_config_byte(dev, 0x45, 0x80); - - /* Gate INTR, and flush line buffer */ - pci_write_config_byte(dev, 0x46, 0x60); - - /* Enable EISA ports 4D0/4D1. Do we need this ? */ - pci_write_config_byte(dev, 0x47, 0xe6); /* was 20 */ - - /* 512 K PCI Decode */ - pci_write_config_byte(dev, 0x48, 0x01); - - /* Wait for PGNT before grant to ISA Master/DMA */ - /* ports 0-FF to SDBus */ - /* IRQ 14 and 15 for ide 0/1 */ - pci_write_config_byte(dev, 0x4a, 0x04); /* Was c4 */ - - /* Plug'n'Play */ - /* Parallel DRQ 3, Floppy DRQ 2 (default) */ - pci_write_config_byte(dev, 0x50, 0x0e); - - /* IRQ Routing for Floppy and Parallel port */ - /* IRQ 6 for floppy, IRQ 7 for parallel port */ - pci_write_config_byte(dev, 0x51, 0x76); - - /* IRQ Routing for serial ports (take IRQ 3 and 4) */ - pci_write_config_byte(dev, 0x52, 0x34); - - /* All IRQ's level triggered. */ - pci_write_config_byte(dev, 0x54, 0x00); - - /* PCI IRQ's all at IRQ 9 */ - pci_write_config_byte(dev, 0x55, 0x90); - pci_write_config_byte(dev, 0x56, 0x99); - pci_write_config_byte(dev, 0x57, 0x90); - - /* Enable Keyboard */ - pci_read_config_byte(dev, 0x5A, &regval); - regval |= 0x01; - pci_write_config_byte(dev, 0x5A, regval); - - pci_write_config_byte(dev, 0x80, 0); - pci_write_config_byte(dev, 0x85, 0x01); - -/* pci_write_config_byte(dev, 0x77, 0x00); */ - } -} - -/* - * Initialize PNP irq routing - */ - -void via_init_irq_routing(uint8 irq_map[]) -{ - char *s; - uint8 level_edge_bits = 0xf; - - /* Set irq routings */ - pci_write_cfg_byte(0, 7<<3, 0x55, irq_map[0]<<4); - pci_write_cfg_byte(0, 7<<3, 0x56, irq_map[1] | irq_map[2]<<4); - pci_write_cfg_byte(0, 7<<3, 0x57, irq_map[3]<<4); - - /* - * Gather level/edge bits - * Default is to assume level triggered - */ - - s = getenv("pci_irqa_select"); - if (s && strcmp(s, "level") == 0) - level_edge_bits &= ~0x01; - - s = getenv("pci_irqb_select"); - if (s && strcmp(s, "level") == 0) - level_edge_bits &= ~0x02; - - s = getenv("pci_irqc_select"); - if (s && strcmp(s, "level") == 0) - level_edge_bits &= ~0x04; - - s = getenv("pci_irqd_select"); - if (s && strcmp(s, "level") == 0) - level_edge_bits &= ~0x08; - - PRINTF("IRQ map\n"); - PRINTF("%d: %s\n", irq_map[0], level_edge_bits&0x1 ? "edge" : "level"); - PRINTF("%d: %s\n", irq_map[1], level_edge_bits&0x2 ? "edge" : "level"); - PRINTF("%d: %s\n", irq_map[2], level_edge_bits&0x4 ? "edge" : "level"); - PRINTF("%d: %s\n", irq_map[3], level_edge_bits&0x8 ? "edge" : "level"); - pci_write_cfg_byte(0, 7<<3, 0x54, level_edge_bits); - - PRINTF("%02x %02x %02x %02x\n", pci_read_cfg_byte(0, 7<<3, 0x54), - pci_read_cfg_byte(0, 7<<3, 0x55), pci_read_cfg_byte(0, 7<<3, 0x56), - pci_read_cfg_byte(0, 7<<3, 0x57)); -} - - -/* Setup the IDE controller. This doesn't seem to work yet. I/O to an IDE controller port */ -/* always return the last character output on the serial port (!) */ -/* This function is called by the pnp-library when it encounters 0:7:1 */ -void via_cfgfunc_ide_init(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table) -{ - PRINTF("... IDE controller, dev=0x%X\n", dev); - - /* Enable both IDE channels. */ - pci_write_config_byte(dev, 0x40, 0x03); - /* udelay(10000); */ - /* udelay(10000); */ - - /* Enable IO Space */ - pci_write_config_word(dev, 0x04, 0x03); - - /* Set to compatibility mode */ - pci_write_config_byte(dev, 0x09, 0x8A); /* WAS: 0x8f); */ - - /* Set to legacy interrupt mode */ - pci_write_config_byte(dev, 0x3d, 0x00); /* WAS: 0x01); */ - -} - - -/* Set the base address of the floppy controller to 0x3F0 */ -void via_fdc_init(pci_dev_t dev) -{ - unsigned char c; - /* Enable Configuration mode */ - pci_read_config_byte(dev, 0x85, &c); - c |= 0x02; - pci_write_config_byte(dev, 0x85, c); - - /* Set floppy controller port to 0x3F0. */ - SIO_WRITE_CONFIG(0xE3, (0x3F<<2)); - - /* Enable floppy controller */ - SIO_READ_CONFIG(0xE2, c); - c |= 0x10; - SIO_WRITE_CONFIG(0xE2, c); - - /* Switch of configuration mode */ - pci_read_config_byte(dev, 0x85, &c); - c &= ~0x02; - pci_write_config_byte(dev, 0x85, c); -} - -/* Init function 0 of the via southbridge. Called by the pnp-library */ -void via_cfgfunc_via686(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table) -{ - if (PCI_FUNC(dev) == 0) - { - /* FIXME: Try to generate a PCI reset */ - /* unsigned char c; */ - /* pci_read_config_byte(dev, 0x47, &c); */ - /* pci_write_config_byte(dev, 0x47, c | 0x01); */ - - via_isa_init(dev, table); - via_fdc_init(dev); - } -} - -__asm__ (" .globl via_calibrate_time_base \n" - "via_calibrate_time_base: \n" - " lis 9, 0xfe00 \n" - " li 0, 0x00 \n" - " mttbu 0 \n" - " mttbl 0 \n" - "ctb_loop: \n" - " lbz 0, 0x61(9) \n" - " eieio \n" - " andi. 0, 0, 0x20 \n" - " beq ctb_loop \n" - "ctb_done: \n" - " mftb 3 \n" - " blr"); - -extern unsigned long via_calibrate_time_base(void); - -void via_calibrate_bus_freq (void) -{ - unsigned long tb; - - /* This is 20 microseconds */ -#define CALIBRATE_TIME 28636 - - /* Enable the timer (and disable speaker) */ - unsigned char c; - - c = in_byte (0x61); - out_byte (0x61, ((c & ~0x02) | 0x01)); - - /* Set timer 2 to low/high writing */ - out_byte (0x43, 0xb0); - out_byte (0x42, CALIBRATE_TIME & 0xff); - out_byte (0x42, CALIBRATE_TIME >> 8); - - /* Read the time base */ - tb = via_calibrate_time_base (); - - if (tb >= 700000) - gd->bus_clk = 133333333; - else - gd->bus_clk = 100000000; - -} - - -void ide_led(uchar led, uchar status) -{ -/* unsigned char c = in_byte(0x92); */ - -/* if (!status) */ -/* out_byte(0x92, c | 0xC0); */ -/* else */ -/* out_byte(0x92, c & ~0xC0); */ -} - - -void via_init_afterscan(void) -{ - /* Modify IDE controller setup */ - pci_write_cfg_byte(0, 7<<3|1, PCI_LATENCY_TIMER, 0x20); - pci_write_cfg_byte(0, 7<<3|1, PCI_COMMAND, PCI_COMMAND_IO|PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER); - pci_write_cfg_byte(0, 7<<3|1, PCI_INTERRUPT_LINE, 0xff); - pci_write_cfg_byte(0, 7<<3|1, 0x40, 0x0b); /* FIXME: Might depend on drives connected */ - pci_write_cfg_byte(0, 7<<3|1, 0x41, 0x42); /* FIXME: Might depend on drives connected */ - pci_write_cfg_byte(0, 7<<3|1, 0x43, 0x05); - pci_write_cfg_byte(0, 7<<3|1, 0x44, 0x18); - pci_write_cfg_byte(0, 7<<3|1, 0x45, 0x10); - pci_write_cfg_byte(0, 7<<3|1, 0x4e, 0x22); /* FIXME: Not documented, but set in PC bios */ - pci_write_cfg_byte(0, 7<<3|1, 0x4f, 0x20); /* FIXME: Not documented */ - - /* Modify some values in the USB controller */ - pci_write_cfg_byte(0, 7<<3|2, 0x05, 0x17); - pci_write_cfg_byte(0, 7<<3|2, 0x06, 0x01); - pci_write_cfg_byte(0, 7<<3|2, 0x41, 0x12); - pci_write_cfg_byte(0, 7<<3|2, 0x42, 0x03); - pci_write_cfg_byte(0, 7<<3|2, PCI_LATENCY_TIMER, 0x40); - - pci_write_cfg_byte(0, 7<<3|3, 0x05, 0x17); - pci_write_cfg_byte(0, 7<<3|3, 0x06, 0x01); - pci_write_cfg_byte(0, 7<<3|3, 0x41, 0x12); - pci_write_cfg_byte(0, 7<<3|3, 0x42, 0x03); - pci_write_cfg_byte(0, 7<<3|3, PCI_LATENCY_TIMER, 0x40); - - -} diff --git a/board/MAI/AmigaOneG3SE/via686.h b/board/MAI/AmigaOneG3SE/via686.h deleted file mode 100644 index 2a06a05..0000000 --- a/board/MAI/AmigaOneG3SE/via686.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef VIA686_H_ -#define VIA686_H_ - - -#define CMOS_ADDR 0x70 -#define CMOS_DATA 0x71 - -#define I8259_MASTER_CONTROL 0x20 -#define I8259_MASTER_MASK 0x21 - -#define I8259_SLAVE_CONTROL 0xA0 -#define I8259_SLAVE_MASK 0xA1 - -#define SIO_CONFIG_ADDR 0x3F0 -#define SIO_CONFIG_DATA 0x3F1 - -#define SIO_WRITE_CONFIG(addr, byte) \ - out_byte(SIO_CONFIG_ADDR, addr); \ - out_byte(SIO_CONFIG_DATA, byte); - -#define SIO_READ_CONFIG(addr, byte) \ - out_byte(SIO_CONFIG_ADDR, addr); \ - byte = in_byte(SIO_CONFIG_DATA); - -void via_init(void); - -void via_calibrate_bus_freq(void); - -#endif diff --git a/board/MAI/AmigaOneG3SE/video.c b/board/MAI/AmigaOneG3SE/video.c deleted file mode 100644 index e24e28b..0000000 --- a/board/MAI/AmigaOneG3SE/video.c +++ /dev/null @@ -1,541 +0,0 @@ -/* - * (C) Copyright 2002 - * Hyperion Entertainment, Hans-JoergF(a)hyperion-entertainment.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <stdio_dev.h> -#include "memio.h" -#include <part.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned char *cursor_position; -unsigned int cursor_row; -unsigned int cursor_col; - -unsigned char current_attr; - -unsigned int video_numrows = 25; -unsigned int video_numcols = 80; -unsigned int video_scrolls = 0; - -#define VIDEO_BASE (unsigned char *)0xFD0B8000 -#define VIDEO_ROWS video_numrows -#define VIDEO_COLS video_numcols -#define VIDEO_PITCH (2 * video_numcols) -#define VIDEO_SIZE (video_numrows * video_numcols * 2) -#define VIDEO_NAME "vga" - -void video_test(void); -void video_putc(char ch); -void video_puts(char *string); -void video_scroll(int rows); -void video_banner(void); -int video_init(void); -int video_start(void); -int video_rows(void); -int video_cols(void); - -char *prompt_string = "=>"; -unsigned char video_get_attr(void); - -void video_set_color(unsigned char attr) -{ - unsigned char *fb = (unsigned char *)VIDEO_BASE; - int i; - - current_attr = video_get_attr(); - - for (i=0; i<VIDEO_SIZE; i+=2) - { - *(fb+i+1) = current_attr; - } -} - -unsigned char video_get_attr(void) -{ - char *s; - unsigned char attr; - - attr = 0x0f; - - s = getenv("vga_fg_color"); - if (s) - { - attr = atoi(s); - } - - s = getenv("vga_bg_color"); - if (s) - { - attr |= atoi(s)<<4; - } - - return attr; -} - -int video_inited = 0; - -int drv_video_init(void) -{ - int error, devices = 1 ; - struct stdio_dev vgadev ; - if (video_inited) return 1; - video_inited = 1; - video_init(); - memset (&vgadev, 0, sizeof(vgadev)); - - strcpy(vgadev.name, VIDEO_NAME); - vgadev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_SYSTEM; - vgadev.putc = video_putc; - vgadev.puts = video_puts; - vgadev.getc = NULL; - vgadev.tstc = NULL; - vgadev.start = video_start; - - error = stdio_register (&vgadev); - - if (error == 0) - { - char *s = getenv("stdout"); - if (s && strcmp(s, VIDEO_NAME)==0) - { - if (overwrite_console()) return 1; - error = console_assign(stdout, VIDEO_NAME); - if (error == 0) return 1; - else return error; - } - return 1; - } - - return error; -} - -int video_init(void) -{ - cursor_position = VIDEO_BASE; /* Color text display base */ - cursor_row = 0; - cursor_col = 0; - current_attr = video_get_attr(); /* Currently selected value for attribute. */ -/* video_test(); */ - video_set_color(current_attr); - - return 0; -} - -void video_set_cursor(int line, int column) -{ - unsigned short offset = line*video_numcols + column; - cursor_position = VIDEO_BASE + line*VIDEO_PITCH + column*2; - out_byte(0x3D4, 0x0E); - out_byte(0x3D5, offset/256); - out_byte(0x3D4, 0x0F); - out_byte(0x3D5, offset%256); -} - -void video_write_char(int character) -{ - *cursor_position = character; - *(cursor_position+1) = current_attr; -} - -void video_test(void) -{ - -} - -void video_putc(char ch) -{ - switch(ch) - { - case '\n': - cursor_col = 0; - cursor_row += 1; - break; - case '\r': - cursor_col = 0; - break; - case '\b': - if (cursor_col) cursor_col--; - else return; - break; - case '\t': - cursor_col = (cursor_col/8+1)*8; - break; - default: - video_write_char(ch); - cursor_col++; - if (cursor_col > VIDEO_COLS-1) - { - cursor_row++; - cursor_col=0; - } - } - - if (cursor_row > VIDEO_ROWS-1) - video_scroll(1); - video_set_cursor(cursor_row, cursor_col); -} - -void video_scroll(int rows) -{ - unsigned short clear = ((unsigned short)current_attr) | (' '<<8); - unsigned short* addr16 = &((unsigned short *)VIDEO_BASE)[(VIDEO_ROWS-rows)*VIDEO_COLS]; - int i; - char *s; - - s = getenv("vga_askscroll"); - video_scrolls += rows; - - if (video_scrolls >= video_numrows) - { - if (s && strcmp(s, "yes")) - { - while (-1 == tstc()); - } - - video_scrolls = 0; - } - - - memcpy(VIDEO_BASE, VIDEO_BASE+rows*(VIDEO_COLS*2), (VIDEO_ROWS-rows)*(VIDEO_COLS*2)); - for (i = 0 ; i < rows * VIDEO_COLS ; i++) - addr16[i] = clear; - cursor_row-=rows; - cursor_col=0; -} - -void video_puts(char *string) -{ - while (*string) - { - video_putc(*string); - string++; - } -} - -int video_start(void) -{ - return 0; -} - -unsigned char video_single_box[] = -{ - 218, 196, 191, - 179, 179, - 192, 196, 217 -}; - -unsigned char video_double_box[] = -{ - 201, 205, 187, - 186, 186, - 200, 205, 188 -}; - -unsigned char video_single_title[] = -{ - 195, 196, 180, 180, 195 -}; - -unsigned char video_double_title[] = -{ - 204, 205, 185, 181, 198 -}; - -#define SINGLE_BOX 0 -#define DOUBLE_BOX 1 - -unsigned char *video_addr(int x, int y) -{ - return VIDEO_BASE + 2*(VIDEO_COLS*y) + 2*x; -} - -void video_bios_print_string(char *s, int x, int y, int attr, int count) -{ - int cattr = current_attr; - if (attr != -1) current_attr = attr; - video_set_cursor(x,y); - while (count) - { - char c = *s++; - if (attr == -1) current_attr = *s++; - video_putc(c); - count--; - } -} - -void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h) -{ - unsigned char *fb, *fb2; - unsigned char *st = (style == SINGLE_BOX)?video_single_box : video_double_box; - unsigned char *ti = (style == SINGLE_BOX)?video_single_title : video_double_title; - int i; - - fb = video_addr(x,y); - *(fb) = st[0]; - *(fb+1) = attr; - fb += 2; - - fb2 = video_addr(x,y+h-1); - *(fb2) = st[5]; - *(fb2+1) = attr; - fb2 += 2; - - for (i=0; i<w-2;i++) - { - *fb = st[1]; - fb++; - *fb = attr; - fb++; - - *fb2 = st[6]; - fb2++; - *fb2 = attr; - fb2++; - - } - *fb = st[2]; - *(fb+1) = attr; - - *fb2 = st[7]; - *(fb2+1) = attr; - - fb = video_addr(x, y+1); - fb2 = video_addr(x+w-1, y+1); - for (i=0; i<h-2; i++) - { - *fb = st[3]; - *(fb+1) = attr; fb += 2*VIDEO_COLS; - - *fb2 = st[4]; - *(fb2+1) = attr; fb2 += 2*VIDEO_COLS; - } - - /* Draw title */ - if (title) - { - if (separate == 0) - { - fb = video_addr(x+1, y); - *fb = ti[3]; - fb += 2; - *fb = ' '; - fb += 2; - while (*title) - { - *fb = *title; - fb ++; - *fb = attr; - fb++; title++; - } - *fb = ' '; - fb += 2; - *fb = ti[4]; - } - else - { - fb = video_addr(x, y+2); - *fb = ti[0]; - fb += 2; - for (i=0; i<w-2; i++) - { - *fb = ti[1]; - *(fb+1) = attr; - fb += 2; - } - *fb = ti[2]; - *(fb+1) = attr; - fb = video_addr(x+1, y+1); - for (i=0; i<w-2; i++) - { - *fb = ' '; - *(fb+1) = attr; - fb += 2; - } - fb = video_addr(x+2, y+1); - - while (*title) - { - *fb = *title; - *(fb+1) = attr; - fb += 2; - title++; - } - } - } - -} - -void video_draw_text(int x, int y, int attr, char *text) -{ - unsigned char *fb = video_addr(x,y); - while (*text) - { - *fb++ = *text++; - *fb++ = attr; - } -} - -void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr) -{ - unsigned char *save = (unsigned char *)save_area; - unsigned char *fb = video_addr(x,y); - int i,j; - for (i=0; i<h; i++) - { - unsigned char *fbb = fb; - for (j=0; j<w; j++) - { - *save ++ = *fb; - if (clearchar > 0) *fb = clearchar; - fb ++; - *save ++ = *fb; - if (clearattr > 0) *fb = clearattr; - } - fb = fbb + 2*VIDEO_COLS; - } -} - -void video_restore_rect(int x, int y, int w, int h, void *save_area) -{ - unsigned char *save = (unsigned char *)save_area; - unsigned char *fb = video_addr(x,y); - int i,j; - for (i=0; i<h; i++) - { - unsigned char *fbb = fb; - for (j=0; j<w; j++) - { - *fb ++ = *save ++; - *fb ++ = *save ++; - } - fb = fbb + 2*VIDEO_COLS; - } - -} - -int video_rows(void) -{ - return VIDEO_ROWS; -} - -int video_cols(void) -{ - return VIDEO_COLS; -} - -void video_size(int cols, int rows) -{ - video_numrows = rows; - video_numcols = cols; -} - -void video_clear(void) -{ - unsigned short *fbb = (unsigned short *)0xFD0B8000; - int i,j; - unsigned short val = 0x2000 | current_attr; - - for (i=0; i<video_rows(); i++) - { - for (j=0; j<video_cols(); j++) - { - *fbb++ = val; - } - } - video_set_cursor(0,0); - cursor_row = 0; - cursor_col = 0; -} - -#ifdef EASTEREGG -int video_easteregg_active = 0; - -void video_easteregg(void) -{ - video_easteregg_active = 1; -} -#endif - -extern block_dev_desc_t * ide_get_dev(int dev); -extern char version_string[]; - -void video_banner(void) -{ - block_dev_desc_t *ide; - int i; - char *s; - int maxdev; - - - if (video_inited == 0) return; -#ifdef EASTEREGG - if (video_easteregg_active) - { - prompt_string=""; - video_clear(); - printf("\n"); - printf(" **** COMMODORE 64 BASIC X2 ****\n\n"); - printf(" 64K RAM SYSTEM 38911 BASIC BYTES FREE\n\n"); - printf("READY\n"); - } - else - { -#endif - s = getenv("ide_maxbus"); - if (s) - maxdev = atoi(s) * 2; - else - maxdev = 4; - - s = getenv("stdout"); - if (s && strcmp(s, "serial") == 0) - return; - - video_clear(); - printf("%s\n\nCPU: ", version_string); - checkcpu(); - printf("DRAM: %ld MB\n", gd->bd->bi_memsize/(1024*1024)); - printf("FSB: %ld MHz\n", gd->bd->bi_busfreq/1000000); - - printf("\n---- Disk summary ----\n"); - for (i = 0; i < maxdev; i++) - { - ide = ide_get_dev(i); - printf("Device %d: ", i); - dev_print(ide); - } - -/* - video_draw_box(SINGLE_BOX, 0x0F, "Test 1", 0, 0,18, 72, 4); - video_draw_box(DOUBLE_BOX, 0x0F, "Test 2", 1, 4,10, 50, 6); - video_draw_box(DOUBLE_BOX, 0x0F, "Test 3", 0, 40, 3, 20, 5); - - video_draw_text(1, 4, 0x2F, "Highlighted options"); - video_draw_text(1, 5, 0x0F, "Non-selected option"); - video_draw_text(1, 6, 0x07, "disabled option"); -*/ -#ifdef EASTEREGG - } -#endif -} diff --git a/board/MAI/menu/cmd_menu.c b/board/MAI/menu/cmd_menu.c deleted file mode 100644 index 2b97d23..0000000 --- a/board/MAI/menu/cmd_menu.c +++ /dev/null @@ -1,16 +0,0 @@ -#include <common.h> -#include <command.h> - -int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] ) -{ -/* printf("<NOT YET IMPLEMENTED>\n"); */ - return 0; -} - -#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP) -U_BOOT_CMD( - menu, 1, 1, do_menu, - "display BIOS setup menu", - "" -); -#endif diff --git a/boards.cfg b/boards.cfg index e54673e..4487586 100644 --- a/boards.cfg +++ b/boards.cfg @@ -307,7 +307,6 @@ M5282EVB m68k mcf52x2 m5282evb freescale M53017EVB m68k mcf52x2 m53017evb freescale microblaze-generic microblaze microblaze microblaze-generic xilinx mpc7448hpc2 powerpc 74xx_7xx mpc7448hpc2 freescale -AmigaOneG3SE powerpc 74xx_7xx AmigaOneG3SE MAI pdm360ng powerpc mpc512x mecp5123 powerpc mpc512x - esd cmi_mpc5xx powerpc mpc5xx cmi diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 8803202..74ff205 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -635,15 +635,6 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) usb_stop(); #endif -#ifdef CONFIG_AMIGAONEG3SE - /* - * We've possible left the caches enabled during - * bios emulation, so turn them off again - */ - icache_disable(); - dcache_disable(); -#endif - ret = bootm_load_os(images.os, &load_end, 1); if (ret < 0) { diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index 8e18c71..4c16d19 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -183,31 +183,6 @@ static FDC_COMMAND_STRUCT cmd; /* global command struct */ #define CONFIG_SYS_ISA_IO_OFFSET 0 #endif - -#ifdef CONFIG_AMIGAONEG3SE -unsigned char INT6_Status; - -void fdc_interrupt(void) -{ - INT6_Status = 0x80; -} - -/* waits for an interrupt (polling) */ -int wait_for_fdc_int(void) -{ - unsigned long timeout; - timeout = FDC_TIME_OUT; - while(((volatile)INT6_Status & 0x80) == 0) { - timeout--; - udelay(10); - if(timeout == 0) /* timeout occured */ - return FALSE; - } - INT6_Status = 0; - return TRUE; -} -#endif - /* Supporting Functions */ /* reads a Register of the FDC */ unsigned char read_fdc_reg(unsigned int addr) @@ -230,7 +205,6 @@ void write_fdc_reg(unsigned int addr, unsigned char val) tmp[0]=val; } -#ifndef CONFIG_AMIGAONEG3SE /* waits for an interrupt (polling) */ int wait_for_fdc_int(void) { @@ -245,8 +219,6 @@ int wait_for_fdc_int(void) return TRUE; } -#endif - /* reads a byte from the FIFO of the FDC and checks direction and RQM bit of the MSR. returns -1 if timeout, or byte if ok */ int read_fdc_byte(void) @@ -438,7 +410,6 @@ int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) return(fdc_issue_cmd(pCMD,pFG)); } -#ifndef CONFIG_AMIGAONEG3SE /* terminates current command, by not servicing the FIFO * waits for interrupt and fills in the result bytes */ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD) @@ -452,27 +423,6 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD) } return TRUE; } -#endif -#ifdef CONFIG_AMIGAONEG3SE -int fdc_terminate(FDC_COMMAND_STRUCT *pCMD) -{ - int i; - for(i=0;i<100;i++) - udelay(500); /* wait 500usec for fifo overrun */ - while((INT6_Status&0x80)==0x00); /* wait as long as no int has occured */ - for(i=0;i<7;i++) { - pCMD->result[i]=(unsigned char)read_fdc_byte(); - } - INT6_Status = 0; - return TRUE; -} - -#endif - -#ifdef CONFIG_AMIGAONEG3SE -#define disable_interrupts() 0 -#define enable_interrupts() (void)0 -#endif /* reads data from FDC, seek commands are issued automatic */ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) @@ -593,11 +543,6 @@ retrycal: return TRUE; } -#ifdef CONFIG_AMIGAONEG3SE -#undef disable_interrupts() -#undef enable_interrupts() -#endif - /* Scan all drives and check if drive is present and disk is inserted */ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) { @@ -647,11 +592,6 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) { int i; -#ifdef CONFIG_AMIGAONEG3SE - irq_install_handler(6, (interrupt_handler_t *)fdc_interrupt, NULL); - i8259_unmask_irq(6); -#endif - #ifdef CONFIG_SYS_FDC_HW_INIT fdc_hw_init (); #endif diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 093ca9f..8bd8920 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -119,31 +119,22 @@ ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS] = { }; -#ifndef CONFIG_AMIGAONEG3SE static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS]; -#else -static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS] = {0,}; -#endif block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE]; /* ------------------------------------------------------------------------- */ #ifdef CONFIG_IDE_LED -#if !defined(CONFIG_KUP4K) && !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003) &&!defined(CONFIG_CPC45) +# if !defined(CONFIG_BMS2003) && \ + !defined(CONFIG_CPC45) && \ + !defined(CONFIG_KUP4K) && \ + !defined(CONFIG_KUP4X) static void ide_led (uchar led, uchar status); #else extern void ide_led (uchar led, uchar status); #endif #else -#ifndef CONFIG_AMIGAONEG3SE #define ide_led(a,b) /* dummy */ -#else -extern void ide_led(uchar led, uchar status); -#define LED_IDE1 1 -#define LED_IDE2 2 -#define CONFIG_IDE_LED 1 -#define DEVICE_LED(x) 1 -#endif #endif #ifdef CONFIG_IDE_RESET @@ -562,13 +553,10 @@ void ide_init (void) #endif unsigned char c; int i, bus; -#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) +#if defined(CONFIG_SC3) unsigned int ata_reset_time = ATA_RESET_TIME; char *s; #endif -#ifdef CONFIG_AMIGAONEG3SE - unsigned int max_bus_scan; -#endif #ifdef CONFIG_IDE_8xx_PCCARD extern int pcmcia_on (void); extern int ide_devices_found; /* Initialized in check_ide_device() */ @@ -638,19 +626,8 @@ void ide_init (void) * Wait for IDE to get ready. * According to spec, this can take up to 31 seconds! */ -#ifndef CONFIG_AMIGAONEG3SE for (bus=0; bus<CONFIG_SYS_IDE_MAXBUS; ++bus) { int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS); -#else - s = getenv("ide_maxbus"); - if (s) - max_bus_scan = simple_strtol(s, NULL, 10); - else - max_bus_scan = CONFIG_SYS_IDE_MAXBUS; - - for (bus=0; bus<max_bus_scan; ++bus) { - int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / max_bus_scan); -#endif #ifdef CONFIG_IDE_8xx_PCCARD /* Skip non-ide devices from probing */ @@ -668,30 +645,19 @@ void ide_init (void) udelay (100000); /* 100 ms */ ide_outb (dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev)); udelay (100000); /* 100 ms */ -#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) - if ((s = getenv("ide_reset_timeout")) != NULL) - ata_reset_time = simple_strtol(s, NULL, 10); -#endif i = 0; do { udelay (10000); /* 10 ms */ c = ide_inb (dev, ATA_STATUS); i++; -#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) +#if defined(CONFIG_SC3) if (i > (ata_reset_time * 100)) { #else if (i > (ATA_RESET_TIME * 100)) { #endif puts ("** Timeout **\n"); ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */ -#ifdef CONFIG_AMIGAONEG3SE - /* If this is the second bus, the first one was OK */ - if (bus != 0) { - ide_bus_ok[bus] = 0; - goto skip_bus; - } -#endif return; } if ((i >= 100) && ((i%100)==0)) { @@ -714,9 +680,6 @@ void ide_init (void) WATCHDOG_RESET(); } -#ifdef CONFIG_AMIGAONEG3SE - skip_bus: -#endif putc ('\n'); ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */ @@ -1010,10 +973,6 @@ static void ide_ident (block_dev_desc_t *dev_desc) unsigned char c; hd_driveid_t *iop = (hd_driveid_t *)iobuf; -#ifdef CONFIG_AMIGAONEG3SE - int max_bus_scan; - char *s; -#endif #ifdef CONFIG_ATAPI int retries = 0; int do_retry = 0; @@ -1030,19 +989,6 @@ static void ide_ident (block_dev_desc_t *dev_desc) device=dev_desc->dev; printf (" Device %d: ", device); -#ifdef CONFIG_AMIGAONEG3SE - s = getenv("ide_maxbus"); - if (s) { - max_bus_scan = simple_strtol(s, NULL, 10); - } else { - max_bus_scan = CONFIG_SYS_IDE_MAXBUS; - } - if (device >= max_bus_scan*2) { - dev_desc->type=DEV_TYPE_UNKNOWN; - return; - } -#endif - ide_led (DEVICE_LED(device), 1); /* LED on */ /* Select device */ @@ -1086,10 +1032,6 @@ static void ide_ident (block_dev_desc_t *dev_desc) if (((c & ATA_STAT_DRQ) == 0) || ((c & (ATA_STAT_FAULT|ATA_STAT_ERR)) != 0) ) { #ifdef CONFIG_ATAPI -#ifdef CONFIG_AMIGAONEG3SE - s = getenv("ide_doreset"); - if (s && strcmp(s, "on") == 0) -#endif { /* Need to soft reset the device in case it's an ATAPI... */ debug ("Retrying...\n"); @@ -1601,7 +1543,6 @@ static void ide_reset (void) /* ------------------------------------------------------------------------- */ #if defined(CONFIG_IDE_LED) && \ - !defined(CONFIG_AMIGAONEG3SE)&& \ !defined(CONFIG_CPC45) && \ !defined(CONFIG_HMI10) && \ !defined(CONFIG_KUP4K) && \ @@ -1758,9 +1699,6 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha */ mask = ATA_STAT_BUSY|ATA_STAT_DRQ; res = 0; -#ifdef CONFIG_AMIGAONEG3SE -# warning THF: Removed LBA mode ??? -#endif ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res); if ((c & mask) != res) { @@ -1774,9 +1712,6 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha ide_outb (device, ATA_SECT_NUM, 0); ide_outb (device, ATA_CYL_LOW, (unsigned char)(buflen & 0xFF)); ide_outb (device, ATA_CYL_HIGH, (unsigned char)((buflen>>8) & 0xFF)); -#ifdef CONFIG_AMIGAONEG3SE -# warning THF: Removed LBA mode ??? -#endif ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); ide_outb (device, ATA_COMMAND, ATAPI_CMD_PACKET); @@ -1875,16 +1810,6 @@ unsigned char atapi_issue_autoreq (int device, unsigned char res,key,asc,ascq; int notready,unitattn; -#ifdef CONFIG_AMIGAONEG3SE - char *s; - unsigned int timeout, retrycnt; - - s = getenv("ide_cd_timeout"); - timeout = s ? (simple_strtol(s, NULL, 10)*1000000)/5 : 0; - - retrycnt = 0; -#endif - unitattn=ATAPI_UNIT_ATTN; notready=ATAPI_DRIVE_NOT_READY; @@ -1939,25 +1864,6 @@ retry: goto error; } -#ifdef CONFIG_AMIGAONEG3SE - if ((sense_data[2]&0xF)==0x0B) { - debug ("ABORTED COMMAND...retry\n"); - if (retrycnt++ < 4) - goto retry; - return (0xFF); - } - - if ((sense_data[2]&0xf) == 0x02 && - sense_data[12] == 0x04 && - sense_data[13] == 0x01 ) { - debug ("Waiting for unit to become active\n"); - udelay(timeout); - if (retrycnt++ < 4) - goto retry; - return 0xFF; - } -#endif /* CONFIG_AMIGAONEG3SE */ - printf ("ERROR: Unknown Sense key %02X ASC %02X ASCQ %02X\n",key,asc,ascq); error: debug ("ERROR Sense key %02X ASC %02X ASCQ %02X\n",key,asc,ascq); diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index eb89e9e..d2ef217 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -385,18 +385,6 @@ int _do_setenv (int flag, int argc, char *argv[]) return 0; } #endif - -#ifdef CONFIG_AMIGAONEG3SE - if (strcmp(argv[1], "vga_fg_color") == 0 || - strcmp(argv[1], "vga_bg_color") == 0 ) { - extern void video_set_color(unsigned char attr); - extern unsigned char video_get_attr(void); - - video_set_color(video_get_attr()); - return 0; - } -#endif /* CONFIG_AMIGAONEG3SE */ - return 0; } diff --git a/common/console.c b/common/console.c index 51c6fb6..b09b7d1 100644 --- a/common/console.c +++ b/common/console.c @@ -29,10 +29,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_AMIGAONEG3SE -int console_changed = 0; -#endif - #ifdef CONFIG_SYS_CONSOLE_IS_IN_ENV /* * if overwrite_console returns 1, the stdin, stderr and stdout diff --git a/common/env_common.c b/common/env_common.c index 439a4a9..82e4936 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -32,11 +32,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_AMIGAONEG3SE - extern void enable_nvram(void); - extern void disable_nvram(void); -#endif - #undef DEBUG_ENV #ifdef DEBUG_ENV #define DEBUGF(fmt,args...) printf(fmt ,##args) @@ -159,20 +154,6 @@ static uchar env_get_char_init (int index) return (c); } -#ifdef CONFIG_AMIGAONEG3SE -uchar env_get_char_memory (int index) -{ - uchar retval; - enable_nvram(); - if (gd->env_valid) { - retval = ( *((uchar *)(gd->env_addr + index)) ); - } else { - retval = ( default_environment[index] ); - } - disable_nvram(); - return retval; -} -#else uchar env_get_char_memory (int index) { if (gd->env_valid) { @@ -181,7 +162,6 @@ uchar env_get_char_memory (int index) return ( default_environment[index] ); } } -#endif uchar env_get_char (int index) { @@ -229,10 +209,6 @@ void env_relocate (void) gd->reloc_off); #endif -#ifdef CONFIG_AMIGAONEG3SE - enable_nvram(); -#endif - #ifdef ENV_IS_EMBEDDED /* * The environment buffer is embedded with the text segment, @@ -263,10 +239,6 @@ void env_relocate (void) env_relocate_spec (); } gd->env_addr = (ulong)&(env_ptr->data); - -#ifdef CONFIG_AMIGAONEG3SE - disable_nvram(); -#endif } #ifdef CONFIG_AUTO_COMPLETE diff --git a/common/env_nvram.c b/common/env_nvram.c index 2628fe4..7c7cf98 100644 --- a/common/env_nvram.c +++ b/common/env_nvram.c @@ -59,24 +59,6 @@ char * env_name_spec = "NVRAM"; extern uchar default_environment[]; -#ifdef CONFIG_AMIGAONEG3SE -uchar env_get_char_spec (int index) -{ -#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE - uchar c; - - nvram_read(&c, CONFIG_ENV_ADDR+index, 1); - - return c; -#else - uchar retval; - enable_nvram(); - retval = *((uchar *)(gd->env_addr + index)); - disable_nvram(); - return retval; -#endif -} -#else uchar env_get_char_spec (int index) { #ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE @@ -89,7 +71,6 @@ uchar env_get_char_spec (int index) return *((uchar *)(gd->env_addr + index)); #endif } -#endif void env_relocate_spec (void) { @@ -103,19 +84,12 @@ void env_relocate_spec (void) int saveenv (void) { int rcode = 0; -#ifdef CONFIG_AMIGAONEG3SE - enable_nvram(); -#endif #ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE nvram_write(CONFIG_ENV_ADDR, env_ptr, CONFIG_ENV_SIZE); #else if (memcpy ((char *)CONFIG_ENV_ADDR, env_ptr, CONFIG_ENV_SIZE) == NULL) rcode = 1 ; #endif -#ifdef CONFIG_AMIGAONEG3SE - udelay(10000); - disable_nvram(); -#endif return rcode; } @@ -127,9 +101,6 @@ int saveenv (void) */ int env_init (void) { -#ifdef CONFIG_AMIGAONEG3SE - enable_nvram(); -#endif #if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE) ulong crc; uchar data[ENV_SIZE]; @@ -147,8 +118,5 @@ int env_init (void) gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 0; } -#ifdef CONFIG_AMIGAONEG3SE - disable_nvram(); -#endif return (0); } diff --git a/common/main.c b/common/main.c index f7e7c1c..3760ba3 100644 --- a/common/main.c +++ b/common/main.c @@ -427,14 +427,7 @@ void main_loop (void) } } #endif /* CONFIG_MENUKEY */ -#endif /* CONFIG_BOOTDELAY */ - -#ifdef CONFIG_AMIGAONEG3SE - { - extern void video_banner(void); - video_banner(); - } -#endif +#endif /* CONFIG_BOOTDELAY */ /* * Main Loop for Monitor Command Processing diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c index d68b438..ac4eb6a 100644 --- a/drivers/rtc/mc146818.c +++ b/drivers/rtc/mc146818.c @@ -67,9 +67,6 @@ int rtc_get (struct rtc_time *tmp) wday = rtc_read (RTC_DAY_OF_WEEK); mon = rtc_read (RTC_MONTH); year = rtc_read (RTC_YEAR); -#ifdef CONFIG_AMIGAONEG3SE - wday -= 1; /* VIA 686 stores Sunday = 1, Monday = 2, ... */ -#endif #ifdef RTC_DEBUG printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " "hr: %02x min: %02x sec: %02x\n", @@ -114,11 +111,7 @@ int rtc_set (struct rtc_time *tmp) rtc_write (RTC_YEAR, bin2bcd(tmp->tm_year % 100)); rtc_write (RTC_MONTH, bin2bcd(tmp->tm_mon)); -#ifdef CONFIG_AMIGAONEG3SE - rtc_write (RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday)+1); -#else rtc_write (RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday)); -#endif rtc_write (RTC_DATE_OF_MONTH, bin2bcd(tmp->tm_mday)); rtc_write (RTC_HOURS, bin2bcd(tmp->tm_hour)); rtc_write (RTC_MINUTES, bin2bcd(tmp->tm_min )); diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c index b176882..e285823 100644 --- a/drivers/rtc/mk48t59.c +++ b/drivers/rtc/mk48t59.c @@ -63,24 +63,6 @@ static void rtc_write (short reg, uchar val) out8(RTC(reg),val); } -#elif defined(CONFIG_AMIGAONEG3SE) - -#include "../board/MAI/AmigaOneG3SE/via686.h" -#include "../board/MAI/AmigaOneG3SE/memio.h" - - -static uchar rtc_read (short reg) -{ - out_byte(CMOS_ADDR, (uint8)reg); - return in_byte(CMOS_DATA); -} - -static void rtc_write (short reg, uchar val) -{ - out_byte(CMOS_ADDR, (uint8)reg); - out_byte(CMOS_DATA, (uint8)val); -} - #elif defined(CONFIG_EVAL5200) static uchar rtc_read (short reg) diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h deleted file mode 100644 index 0dfb23b..0000000 --- a/include/configs/AmigaOneG3SE.h +++ /dev/null @@ -1,404 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * - * Configuration settings for the AmigaOneG3SE board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_AMIGAONEG3SE 1 - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_VERY_BIG_RAM 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks passed to Linux in Hz */ - -#define CONFIG_BOOTARGS "root=/dev/ram rw ramdisk_size=4096" - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_AMIGA_PARTITION - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_NET -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FDC -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_USB -#define CONFIG_CMD_BSP -#define CONFIG_CMD_PCI - - -#define CONFIG_PCI 1 -/* #define CONFIG_PCI_SCAN_SHOW 1 */ -#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ - -#define atoi(x) simple_strtoul(x,NULL,10) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "] " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -/* #undef CONFIG_SYS_HUSH_PARSER */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH_MAX_SIZE 0x00080000 -/* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x80000000 /* 2G */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* Reserve 512 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* Size in bytes reserved for initial data - */ -/* HJF: used to be 0x400000 */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_INIT_RAM_LOCK - -/* - * Temporary buffer for serial data until the real serial driver - * is initialised (memtest will destroy this buffer) - */ -#define CONFIG_SYS_SCONSOLE_ADDR CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_SCONSOLE_SIZE 0x0002000 - -/* SDRAM 0 - 256MB - */ - -/*HJF: #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_4M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U*/ - -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -/* PCI Range - */ -#define CONFIG_SYS_DBAT1L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) -/* HJF: -#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATL_PP_RW) -#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATL_PP_RW ) -#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATU_BL_256M | BATU_VS | BATU_VP) -*/ - -/* Init RAM in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -/* This used to be commented out */ -#define CONFIG_SYS_IBAT2L CONFIG_SYS_DBAT2L -/* This here too */ -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U - - -/* I/O and PCI memory at 0xf0000000 - */ -#define CONFIG_SYS_DBAT3L (0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_BUS_HZ 133000000 /* bus speed - 100 mhz */ -#define CONFIG_SYS_CPU_CLK 133000000 -#define CONFIG_SYS_BUS_CLK 133000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* Max number of sectors in one bank */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -/* - * Environment is stored in NVRAM. - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_ADDR 0xFD0E0000 /* This should be 0xFD0E0000, but we skip bytes to - * protect softex's settings for now. - * Original 768 bytes where not enough. - */ -#define CONFIG_ENV_SIZE 0x8000 /* Size of the Environment. See comment above */ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* stdin/stdout/stderr are in environment */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_ENV_OVERWRITE 1 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * L2 cache - */ -#define CONFIG_SYS_L2 -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - - -/*----------------------------------------------------------------------- - * IDE ATAPI Configuration - */ - -#define CONFIG_ATAPI 1 -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_ISO_PARTITION 1 - -#define CONFIG_SYS_ATA_BASE_ADDR 0xFE000000 /* was: via_get_base_addr() */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1F0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 - -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 - -/*----------------------------------------------------------------------- - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - -/*----------------------------------------------------------------------- - RTC -*/ -#define CONFIG_RTC_MC146818 - -/*----------------------------------------------------------------------- - * NS16550 Configuration - */ - -#define CONFIG_SYS_NS16550 - -#define CONFIG_SYS_NS16550_COM1 0xFE0003F8 -#define CONFIG_SYS_NS16550_COM2 0xFE0002F8 - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -/* base address for ISA I/O - */ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xFE000000 - -/* ISA Interrupt stuff (taken from JWL) */ - -#define ISA_INT1_OCW1 0x21 -#define ISA_INT2_OCW1 0xA1 -#define ISA_INT1_OCW2 0x20 -#define ISA_INT2_OCW2 0xA0 -#define ISA_INT1_OCW3 0x20 -#define ISA_INT2_OCW3 0xA0 - -#define ISA_INT1_ICW1 0x20 -#define ISA_INT2_ICW1 0xA0 -#define ISA_INT1_ICW2 0x21 -#define ISA_INT2_ICW2 0xA1 -#define ISA_INT1_ICW3 0x21 -#define ISA_INT2_ICW3 0xA1 -#define ISA_INT1_ICW4 0x21 -#define ISA_INT2_ICW4 0xA1 - - -/* - * misc - */ - -#define CONFIG_NET_MULTI -#define CONFIG_SYS_BOARD_ASM_INIT -#define CONFIG_LAST_STAGE_INIT - -/* #define CONFIG_ETHADDR 00:09:D2:10:00:76 */ -/* #define CONFIG_IPADDR 192.168.0.2 */ -/* #define CONFIG_NETMASK 255.255.255.240 */ -/* #define CONFIG_GATEWAYIP 192.168.0.3 */ - -#define CONFIG_3COM -/* #define CONFIG_BOOTP_RANDOM_DELAY */ - -/* - * USB configuration - */ -#define CONFIG_USB_UHCI 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_USB_KEYBOARD 1 -#define CONFIG_SYS_STDIO_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */ - -/* - * Autoboot stuff - */ -#define CONFIG_BOOTDELAY 5 /* Boot automatically after five seconds */ -#define CONFIG_PREBOOT "" -#define CONFIG_BOOTCOMMAND "fdcboot; diskboot" -#define CONFIG_MENUPROMPT \ - "Press any key to interrupt autoboot: %2d ", bootdelay -#define CONFIG_MENUKEY ' ' -#define CONFIG_MENUCOMMAND "menu" -/* #define CONFIG_AUTOBOOT_KEYED */ - -/* - * Extra ENV stuff - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdout=vga\0" \ - "stdin=ps2kbd\0" \ - "ide_doreset=on\0" \ - "ide_maxbus=2\0" \ - "ide_cd_timeout=30\0" \ - "menucmd=menu\0" \ - "pci_irqa=9\0" \ - "pci_irqa_select=edge\0" \ - "pci_irqb=10\0" \ - "pci_irqb_select=edge\0" \ - "pci_irqc=11\0" \ - "pci_irqc_select=edge\0" \ - "pci_irqd=7\0" \ - "pci_irqd_select=edge\0" - - -/* #define CONFIG_MII 1 */ -/* #define CONFIG_BITBANGMII 1 */ - - -#endif /* __CONFIG_H */ -- 1.7.0.1

2 2

[U-Boot] [PATCH] Add support for HP Jornada flashrom boards
by Kristoffer Ericson 13 Oct '10

13 Oct '10

This patch adds support for the HP Jornada flashboards that were made in 2008. Older flashroms should work if memory registers are adjusted. Signed-off-by: Kristoffer Ericson <kristoffer.ericson(a)gmail.com> --- MAINTAINERS | 4 + board/jornada/Makefile | 53 +++++++++++ board/jornada/config.mk | 6 ++ board/jornada/jornada.c | 65 ++++++++++++++ board/jornada/setup.S | 210 +++++++++++++++++++++++++++++++++++++++++++++ board/jornada/u-boot.lds | 58 +++++++++++++ boards.cfg | 1 + include/configs/jornada.h | 154 +++++++++++++++++++++++++++++++++ 8 files changed, 551 insertions(+), 0 deletions(-) create mode 100644 board/jornada/Makefile create mode 100644 board/jornada/config.mk create mode 100644 board/jornada/jornada.c create mode 100644 board/jornada/setup.S create mode 100644 board/jornada/u-boot.lds create mode 100644 include/configs/jornada.h diff --git a/MAINTAINERS b/MAINTAINERS index 2cf29dd..9d8be15 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -587,6 +587,10 @@ Thomas Elste <info(a)elste.org> modnet50 ARM720T (NET+50) +Kristoffer Ericson <kristoffer.ericson(a)gmail.com> + + jornada SA1110 + Fabio Estevam <Fabio.Estevam(a)freescale.com> mx31pdk i.MX31 diff --git a/board/jornada/Makefile b/board/jornada/Makefile new file mode 100644 index 0000000..1b4e192 --- /dev/null +++ b/board/jornada/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# 2004 (c) MontaVista Software, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := jornada.o +SOBJS := setup.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/jornada/config.mk b/board/jornada/config.mk new file mode 100644 index 0000000..59968aa --- /dev/null +++ b/board/jornada/config.mk @@ -0,0 +1,6 @@ +# +# SA-1110 based HP Jornada Flashrom +# +# We got 2 x 16 Intel SDRAM in total 128MB +# +TEXT_BASE = 0xc1f00000 diff --git a/board/jornada/jornada.c b/board/jornada/jornada.c new file mode 100644 index 0000000..c0e363e --- /dev/null +++ b/board/jornada/jornada.c @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * 2004 (c) MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <SA-1100.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ + +static void jornada_init(void) +{ + +} + +int board_init(void) +{ + gd->bd->bi_arch_number = 48; + gd->bd->bi_boot_params = 0xc0000100; + + + /* + * Turn on flashing. + * Would be nice to have some protection but + * that would have to be implemented in the + * flash init function, which isnt possible yet. + */ + PPSR |= (1 << 7); + PPDR |= (1 << 7); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + + return (0); +} diff --git a/board/jornada/setup.S b/board/jornada/setup.S new file mode 100644 index 0000000..885e02f --- /dev/null +++ b/board/jornada/setup.S @@ -0,0 +1,210 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw(a)its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker(a)its.tudelft.nl) + * 2004 (c) MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include "config.h" +#include "version.h" + + +/*----------------------------------------------------------------------- + * Board defines: + */ + +#define MDCNFG 0x00 +#define MDCAS00 0x04 +#define MDCAS01 0x08 +#define MDCAS02 0x0C +#define MSC0 0x10 +#define MSC1 0x14 +#define MECR 0x18 +#define MDREFR 0x1C +#define MDCAS20 0x20 +#define MDCAS21 0x24 +#define MDCAS22 0x28 +#define MSC2 0x2C +#define SMCNFG 0x30 + +#define GPDR 0x04 +#define GPSR 0x08 +#define GPCR 0x0C +#define GAFR 0x1C + +#define PPDR 0x00 +#define PPSR 0x04 +#define PPAR 0x08 + +#define MDREFR_TRASR(n_) (n_ & (0x0000000f)) +#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4) +#define MDREFR_K0DB2 (1 << 18) +#define MDREFR_K1DB2 (1 << 22) +#define MDREFR_K2DB2 (1 << 26) + +#define MDREFR_K0RUN (1 << 17) +#define MDREFR_K1RUN (1 << 21) +#define MDREFR_K2RUN (1 << 25) + +#define MDREFR_SLFRSH (1 << 31) +#define MDREFR_E1PIN (1 << 20) + +#define PSSR 0x04 +#define PSSR_DH 0x00000008 +#define POSR 0x08 +#define RCSR 0x04 + +/*----------------------------------------------------------------------- + * Setup parameters for the board: + */ +MEM_BASE: .long 0xa0000000 +MEM_START: .long 0xc0000000 +PWR_BASE: .word 0x90020000 +RST_BASE: .long 0x90030000 +PPC_BASE: .long 0x90060000 +GPIO_BASE: .long 0x90040000 +IC_BASE: .word 0x90050000 + +cpuspeed: .word 0xa0 +/* calculated from old blob bootloader */ +mdcnfg: .long 0x00037267 /* mdcnfg 0x00037267 */ +mdcas00: .long 0x5555557f /* mdcas00 0x5555557f */ +mdcas01: .long 0x55555555 /* mdcas01 0x55555555 */ +mdcas02: .long 0x55555555 /* mdcas02 0x55555555 */ +msc0: .long 0xfff04f78 /* msc0 0xfff04f78 */ +msc1: .long 0xfff8fff0 /* msc1 0xfff8fff0 */ +mecr: .long 0x98c698c6 /* mecr 0x98c698c6 */ +mdrefr: .long 0x067600c7 /* mdrefr 0x04340327 */ +mdcas20: .long 0xd1284142 /* mdcas20 0xd1284142 */ +mdcas21: .long 0x72249529 /* mdcas21 0x72249529 */ +mdcas22: .long 0x78414351 /* mdcas22 0x78414351 */ +msc2: .long 0x201d2959 /* msc2 0x201d2959 */ +smcnfg: .long 0x00000000 /* smcnfg 0x00000000 */ + +pin_set_out: .long 0x37ff70 +pin_set_dir: .long 0x11480 + +gpdr_set: .long 0x0B3A0900 +gpsr_set: .long 0x02100800 +gpcr_set: .long 0x092A0100 +gafr_set: .long 0x08600000 + +.globl lowlevel_init +lowlevel_init: + + /* set output and direction of pins */ + ldr r0, PPC_BASE + ldr r1, pin_set_out + str r1, [r0, #PPSR] + ldr r1, pin_set_dir + str r1, [r0, #PPDR] + + /* Setting up the memory and stuff */ + /***********************************/ + + ldr r0, MEM_BASE + + ldr r1, mdcnfg + str r1, [r0, #MDCNFG] + ldr r1, mdcas00 + str r1, [r0, #MDCAS00] + ldr r1, mdcas01 + str r1, [r0, #MDCAS01] + ldr r1, mdcas02 + str r1, [r0, #MDCAS02] + ldr r1, mdcas20 + str r1, [r0, #MDCAS20] + ldr r1, mdcas21 + str r1, [r0, #MDCAS21] + ldr r1, mdcas22 + str r1, [r0, #MDCAS22] + + /* clear kxDB2 */ + ldr r2, [r0, #MDREFR] + bic r2, r2, #MDREFR_K0DB2 + bic r2, r2, #MDREFR_K1DB2 + bic r2, r2, #MDREFR_K2DB2 + str r2, [r0, #MDREFR] + + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_TRASR(7) + + mov r4, #0x2000 + spin: subs r4, r4, #1 + bne spin + + ldr r1, PWR_BASE + mov r2, #PSSR_DH + str r2, [r1, #PSSR] + + ldr r2, [r0, #MDREFR] + bic r2, r2, #MDREFR_K0DB2 + bic r2, r2, #MDREFR_K1DB2 + bic r2, r2, #MDREFR_K2DB2 + str r2, [r0, #MDREFR] + + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_TRASR(7) + orr r2, r2, #MDREFR_DRI(12) + orr r2, r2, #MDREFR_K0DB2 + orr r2, r2, #MDREFR_K1DB2 + orr r2, r2, #MDREFR_K2DB2 + str r2, [r0, #MDREFR] + + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_K0RUN + orr r2, r2, #MDREFR_K1RUN + orr r2, r2, #MDREFR_K2RUN + str r2, [r0, #MDREFR] + + ldr r2, [r0, #MDREFR] + bic r2, r2, #MDREFR_SLFRSH + str r2, [r0, #MDREFR] + + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_E1PIN + str r2, [r0, #MDREFR] + + ldr r2, MEM_START +.rept 8 + ldr r3, [r2] +.endr + + ldr r1, msc0 + str r1, [r0, #MSC0] + ldr r1, msc1 + str r1, [r0, #MSC1] + ldr r1, msc2 + str r1, [r0, #MSC2] + ldr r1, smcnfg + str r1, [r0, #SMCNFG] + ldr r1, mdcnfg + str r1, [r0, #MDCNFG] + ldr r1, mecr + str r1, [r0, #MECR] + + /* enable SDRAM */ + orr r1, r1, #0x00000001 + str r1, [r0, #MDCNFG] + + mov pc, lr diff --git a/board/jornada/u-boot.lds b/board/jornada/u-boot.lds new file mode 100644 index 0000000..de6101e --- /dev/null +++ b/board/jornada/u-boot.lds @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * 2004 (c) MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/sa1100/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + _end = .; +} diff --git a/boards.cfg b/boards.cfg index f55bd70..9e15726 100644 --- a/boards.cfg +++ b/boards.cfg @@ -70,6 +70,7 @@ dnp1110 arm sa1100 gcplus arm sa1100 lart arm sa1100 shannon arm sa1100 +jornada arm sa1100 mimc200 avr32 at32ap - mimc at32ap700x eNET i386 i386 - - sc520 idmr m68k mcf52x2 diff --git a/include/configs/jornada.h b/include/configs/jornada.h new file mode 100644 index 0000000..d185435 --- /dev/null +++ b/include/configs/jornada.h @@ -0,0 +1,154 @@ +i/* + * Copyright 2010 (C) + * Kristoffer Ericson <kristoffer.ericson(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SA1110 1 /* This is an SA110 CPU */ +#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */ +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_ARM_WITHOUT_RELOC 1 + +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_NO_DCACHE +#undef CONFIG_USE_IRQ + +/* Console setting */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size for initial data */ + +/* + * select serial console configuration + */ +#define CONFIG_SA1100_SERIAL 1 +#define CONFIG_SERIAL3 1 /* we use serial 3 */ +#define CONFIG_BAUDRATE 19200 +#define CONFIG_LOADS_ECHO 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_NET9 +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1" +#define CONFIG_BOOTCOMMAND "run boot_kernel" +#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ +#define CONFIG_SYS_LOAD_ADDR 0xc0000000 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "HP Jornada# " +#define CONFIG_SYS_CBSIZE 256 /* console buffsize */ +#define CONFIG_SYS_PBSIZE (256+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq */ +#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ +#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +i +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_ERASE_TOUT (4096) +#define CONFIG_SYS_FLASH_WRITE_TOUT (4096) +#define CONFIG_SYS_FLASH_INCREMENT 0x02000000 +#define PHYS_FLASH_1 0x00000000 /* starts at 0x0 */ +#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256KB Sectors */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 260 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_MONITOR_LEN 0x00040000 +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_FLASH_SHOW_PROGRESS 1 + +/* Environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0x00040000 +#define CONFIG_ENV_OFFSET 0x00040000 +#define CONFIG_ENV_SIZE 0x00040000 +#define CONFIG_ENV_SECT_SIZE 0x00040000 +#define CONFIG_ENV_OVERWRITE 1 + +/* + Monitor - 0x00000000 - 0x00040000 (256kb) + Environment - 0x00040000 - 0x00080000 (256kb) + Kernel - 0x00080000 - 0x00380000 (3mb) + Rootfs - 0x00380000 - 0x........ (rest) +*/ + +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_INIT_SP_ADDR 0x0 +#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2 0xc4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ + +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=jornada7xx-0" +#define MTDPARTS_DEFAULT "mtdparts=jornada7xx-0:256k(u-boot),256k(env),"\ + "3m(kernel),-(user);" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "flash_kernel=protect off all; " \ + "erase 00080000 0037ffff;cp.b c0000000 00080000 00300000;\0" \ + "flash_uboot=protect off all; " \ + "erase 00000000 0003ffff;cp.b c0000000 00000000 00040000;\0" \ + "boot_kernel=cp.b 00080000 c0000000 00300000;bootm;\0" +#endif /* __CONFIG_H */ -- 1.7.3.1

2 1

[U-Boot] [PATCH] env_mmc: fix cannot save env issue
by Lei Wen 13 Oct '10

13 Oct '10

The env change its implementation after this log, while env mmc didn't change it immediately, which cause issue. Follow to the new style to fix it. commit ea882baf9c17cd142c99e3ff640d3ab01daa5cec Author: Wolfgang Denk <wd(a)denx.de> Date: Sun Jun 20 23:33:59 2010 +0200 New implementation for internal handling of environment variables. Signed-off-by: Lei Wen <leiwen(a)marvell.com> --- common/env_mmc.c | 13 ++++++++++++- 1 files changed, 12 insertions(+), 1 deletions(-) diff --git a/common/env_mmc.c b/common/env_mmc.c index a51a905..23402bd 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -29,6 +29,7 @@ #include <linux/stddef.h> #include <malloc.h> #include <mmc.h> +#include <errno.h> /* references to names in env_common.c */ extern uchar default_environment[]; @@ -96,13 +97,23 @@ inline int write_env(struct mmc *mmc, unsigned long size, int saveenv(void) { + env_t env_new; + ssize_t len; + char *res; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); if (init_mmc_for_env(mmc)) return 1; + res = (char *)&env_new.data; + len = hexport('\0', &res, ENV_SIZE); + if (len < 0) { + error("Cannot export environment: errno = %d\n", errno); + return 1; + } + env_new.crc = crc32(0, env_new.data, ENV_SIZE); printf("Writing to MMC(%d)... ", CONFIG_SYS_MMC_ENV_DEV); - if (write_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, env_ptr)) { + if (write_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, (u_char *)&env_new)) { puts("failed\n"); return 1; } -- 1.7.0.4

2 1

[U-Boot] [PATCH v3] ns16550: Add WATCHDOG_RESET to putc for short watchdog timeout boards
by Stefan Roese 13 Oct '10

13 Oct '10

Call watchdog_reset() upon newline. This is done here in putc since the environment code uses a single puts() to print the complete envrironment upon "printenv". So we can't put this watchdog call in puts(). This is needed for boards with a very short watchdog timeout, like the lwmon5 with a 100ms timeout. Without this patch this board resets in the commands with long outputs, like "printenv" or "fdt print". Note that the image size is not increased with this patch when CONFIG_HW_WATCHDOG or CONFIG_WATCHDOG are not defined since the compiler optimizes this additional code away. Signed-off-by: Stefan Roese <sr(a)denx.de> --- v3: - Only call WATCHDOG_RESET() upon newline - Remove inclusion of common.h v2: - Move declaration and assignment of "count" out of loop as pointed out by Wolfgang (thanks). drivers/serial/ns16550.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 7e833fd..418a556 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -70,6 +70,15 @@ void NS16550_putc (NS16550_t com_port, char c) { while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0); serial_out(c, &com_port->thr); + + /* + * Call watchdog_reset() upon newline. This is done here in putc + * since the environment code uses a single puts() to print the complete + * envrironment upon "printenv". So we can't put this watchdog call + * in puts(). + */ + if (c == '\n') + WATCHDOG_RESET(); } #ifndef CONFIG_NS16550_MIN_FUNCTIONS -- 1.7.3.1

2 1

[U-Boot] [PATCH v3] env_mmc: Fix crashing bug encountered after enabling ARM relocation
by Steve Sakoman 13 Oct '10

13 Oct '10

env_mmc: Fix crashing bug encountered after enabling ARM relocation The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman(a)linaro.org> Acked-by: Stefano Babic <sbabic(a)denx.de> --- v3 - remove the extra space in mmc_initialize call v2 - remove space in puts call and add Acked-by diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 5f2dfd0..328a88d 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -779,6 +779,11 @@ void board_init_r (gd_t *id, ulong dest_addr) onenand_init(); #endif +#ifdef CONFIG_GENERIC_MMC + puts("MMC: "); + mmc_initialize(bd); +#endif + #ifdef CONFIG_HAS_DATAFLASH AT91F_DataflashInit(); dataflash_print_info(); @@ -854,11 +859,6 @@ extern void davinci_eth_set_mac_addr (const u_int8_t *addr); board_late_init (); #endif -#ifdef CONFIG_GENERIC_MMC - puts ("MMC: "); - mmc_initialize (gd->bd); -#endif - #ifdef CONFIG_BITBANGMII bb_miiphy_init(); #endif diff --git a/common/env_mmc.c b/common/env_mmc.c index cc288d4..d443ff5 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -129,18 +129,21 @@ inline int read_env(struct mmc *mmc, unsigned long size, void env_relocate_spec(void) { #if !defined(ENV_IS_EMBEDDED) + char buf[CONFIG_ENV_SIZE]; + struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); - if (init_mmc_for_env(mmc)) + if (init_mmc_for_env(mmc)) { + use_default(); return; + } - if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, env_ptr)) - return use_default(); - - if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc) - return use_default(); + if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) { + use_default(); + return; + } - gd->env_valid = 1; + env_import(buf, 1); #endif }

2 1

[U-Boot] [PATCH v2] env_mmc: Fix crashing bug encountered after enabling ARM relocation
by Steve Sakoman 13 Oct '10

13 Oct '10

env_mmc: Fix crashing bug encountered after enabling ARM relocation The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman(a)linaro.org> Acked-by: Stefano Babic <sbabic(a)denx.de> --- diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 5f2dfd0..6d8e831 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -779,6 +779,11 @@ void board_init_r (gd_t *id, ulong dest_addr) onenand_init(); #endif +#ifdef CONFIG_GENERIC_MMC + puts("MMC: "); + mmc_initialize (bd); +#endif + #ifdef CONFIG_HAS_DATAFLASH AT91F_DataflashInit(); dataflash_print_info(); @@ -854,11 +859,6 @@ extern void davinci_eth_set_mac_addr (const u_int8_t *addr); board_late_init (); #endif -#ifdef CONFIG_GENERIC_MMC - puts ("MMC: "); - mmc_initialize (gd->bd); -#endif - #ifdef CONFIG_BITBANGMII bb_miiphy_init(); #endif diff --git a/common/env_mmc.c b/common/env_mmc.c index cc288d4..d443ff5 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -129,18 +129,21 @@ inline int read_env(struct mmc *mmc, unsigned long size, void env_relocate_spec(void) { #if !defined(ENV_IS_EMBEDDED) + char buf[CONFIG_ENV_SIZE]; + struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); - if (init_mmc_for_env(mmc)) + if (init_mmc_for_env(mmc)) { + use_default(); return; + } - if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, env_ptr)) - return use_default(); - - if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc) - return use_default(); + if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) { + use_default(); + return; + } - gd->env_valid = 1; + env_import(buf, 1); #endif }

2 1

[U-Boot] [PATCH] ppc: Conditionally compile bat_rw.c
by Peter Tyser 13 Oct '10

13 Oct '10

Only a few PPC boards actually use the common BAT manipulation functions, so only compile it for them. Signed-off-by: Peter Tyser <ptyser(a)xes-inc.com> --- arch/powerpc/lib/Makefile | 2 +- include/configs/Alaska8220.h | 1 + include/configs/MPC8610HPCD.h | 1 + include/configs/MPC8641HPCN.h | 1 + include/configs/Yukon8220.h | 1 + include/configs/sbc8641d.h | 1 + include/configs/xpedite517x.h | 1 + 7 files changed, 7 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 2065b6d..cec7666 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -30,7 +30,7 @@ SOBJS-y += ppcstring.o SOBJS-y += ticks.o SOBJS-y += reloc.o -COBJS-y += bat_rw.o +COBJS-$(CONFIG_BAT_RW) += bat_rw.o COBJS-y += board.o COBJS-y += bootm.o COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 576aa74..85b68be 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -31,6 +31,7 @@ #define CONFIG_MPC8220 1 #define CONFIG_ALASKA8220 1 /* ... on Alaska board */ +#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 645d947..2b7b8b5 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -53,6 +53,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ +#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */ #define CONFIG_ALTIVEC 1 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 3b80d14..d92b12d 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -68,6 +68,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_SYS_NUM_ADDR_MAP 8 /* Number of addr map slots = 8 dbats */ diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index c439068..8ec6c84 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -31,6 +31,7 @@ #define CONFIG_MPC8220 1 #define CONFIG_YUKON8220 1 /* ... on Yukon board */ +#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index a7831c0..490d4f5 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -64,6 +64,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 43f1406..c7edfc7 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -37,6 +37,7 @@ #define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ +#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_ALTIVEC 1 -- 1.7.0.4

2 3

[U-Boot] [PATCH] Fix define for MPC5121 ADS board.
by mark.vels＠team-embedded.nl 13 Oct '10

13 Oct '10

Originally the Makefile defines CONFIG_ADS5121_REV2 when configuring for board mpc5121ads_rev2. The config in include/configs/mpc5121ads.h expects a define CONFIG_MPC5121ADS_REV2 for this. Therefore there are two defines used but only 1 is defined. This patch renames references to CONFIG_ADS5121_REV2 to CONFIG_MPC5121ADS_REV2 to have one common define. This patch fixes faulty mem size detection caused by wrong config in include/configs/mpc5121ads.h Signed-off-by: Mark Vels <mark.vels(a)team-embedded.nl> --- Makefile | 2 +- board/freescale/mpc5121ads/mpc5121ads.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 8df60fa..de4ceb9 100644 --- a/Makefile +++ b/Makefile @@ -700,7 +700,7 @@ mpc5121ads_rev2_config \ : unconfig @mkdir -p $(obj)include @if [ "$(findstring rev2,$@)" ] ; then \ - echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ + echo "#define CONFIG_MPC5121ADS_REV2 1" > $(obj)include/config.h; \ fi @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index a84644d..8cc6853 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -102,7 +102,7 @@ int board_early_init_f(void) * write commands in order to establish the device ID. */ -#ifdef CONFIG_ADS5121_REV2 +#ifdef CONFIG_MPC5121ADS_REV2 out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); #else if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { @@ -329,7 +329,7 @@ int checkboard (void) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 spridr = in_be32(&im->sysconf.spridr); - printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", + printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n", brd_rev, cpld_rev); /* initialize function mux & slew rate IO inter alia on IO Pins */ -- 1.7.0.4

3 4

← Newer
1
...
46
47
48
49
50
51
52
...
70
Older →

Jump to page: