October 2010 - U-Boot

[U-Boot] [RFC PATCH 0/3] Add device tree support for ARM to U-Boot
by John Rigby 27 Oct '10

27 Oct '10

These patches add device tree support to the bootm command in u-boot for the ARM. I'm sending the patches to this list first for comments before sending it to the wider audience on the u-boot list. The only testing so far has shown that this patch does not break non-dt booting. I don't have a dt enabled beagle kernel so I have not tried that yet. John Rigby (3): FDT: Add fixup support of multiple banks of memory ARM: WIP: add flat device tree support ARM: add config for beagle with fdt enabled MAKEALL | 1 + arch/arm/include/asm/config.h | 1 + arch/arm/lib/bootm.c | 128 ++++++++++++++- boards.cfg | 1 + common/cmd_bootm.c | 5 +- common/fdt_support.c | 86 +++++----- common/image.c | 7 +- include/configs/omap3_beagle_dt.h | 344 +++++++++++++++++++++++++++++++++++++ include/fdt_support.h | 1 + include/image.h | 2 +- 10 files changed, 531 insertions(+), 45 deletions(-) create mode 100644 include/configs/omap3_beagle_dt.h

12 39

[U-Boot] Your Mail ID Has Won £1,000,000.00. in The BT PROMO.Send
by sharon-sharp＠sbcglobal.net 27 Oct '10

27 Oct '10

Name:Country

1 0

[U-Boot] [PATCH 1/6] GRETH: removed unneccesary register write and one clean up.
by Daniel Hellstrom 27 Oct '10

27 Oct '10

Signed-off-by: Daniel Hellstrom <daniel(a)gaisler.com> --- drivers/net/greth.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 79bc4d9..4f1973c 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -45,7 +45,7 @@ /* ByPass Cache when reading regs */ #define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr) /* Write-through cache ==> no bypassing needed on writes */ -#define GRETH_REGSAVE(addr,data) (*(unsigned int *)(addr) = (data)) +#define GRETH_REGSAVE(addr,data) (*(volatile unsigned int *)(addr) = (data)) #define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data) #define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data) @@ -146,8 +146,6 @@ int greth_init(struct eth_device *dev, bd_t * bis) printf("greth_init\n"); #endif - GRETH_REGSAVE(&regs->control, 0); - if (!greth->rxbd_base) { /* allocate descriptors */ -- 1.5.4

1 5

[U-Boot] current ARM development head
by Alexander Stein 27 Oct '10

27 Oct '10

Hello, I noticed that there is a lot of changes in ARM part of u-boot. Especially the new relocation is a bit tricky. So I'm wondering what and where is the current ARM development head, especially the at91 part. Is it u-boot master branch or some other repository/branch? Best regards, Alexander

3 2

[U-Boot] [PATCH] sparc: add asm/unaligned.h
by Mike Frysinger 27 Oct '10

27 Oct '10

It isn't possible to build any sparc boards without this ... Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- arch/sparc/include/asm/unaligned.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) create mode 100644 arch/sparc/include/asm/unaligned.h diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h new file mode 100644 index 0000000..6cecbbb --- /dev/null +++ b/arch/sparc/include/asm/unaligned.h @@ -0,0 +1 @@ +#include <asm-generic/unaligned.h> -- 1.7.3.1

3 3

[U-Boot] [PATCH 2/3 V3] Make board_init_f under nand_boot.c a weak function
by Sughosh Ganu 27 Oct '10

27 Oct '10

Enable board_init_f to be overridden with a board specific function. Signed-off-by: Sughosh Ganu <urwithsughosh(a)gmail.com> --- Changes since V2: * Fix the checkpatch warnings nand_spl/nand_boot.c | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-) diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index ccd0af2..01ff3e3 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -222,11 +222,13 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs, } #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -void board_init_f (ulong bootflag) +void __board_init_f(ulong bootflag) { - relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, - CONFIG_SYS_TEXT_BASE); + relocate_code(CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, + CONFIG_SYS_TEXT_BASE); } +void board_init_f(ulong bootflag)__attribute__((weak, + alias("__board_init_f"))); #endif /* -- 1.7.0.4

2 2

[U-Boot] Medical Equipment Suppliers - 167, 425 total records with 6, 940 emails and 5, 812 fax numbers
by Eduardo heyday 27 Oct '10

27 Oct '10

This week only I can sell you ANY individual list below for just $99 or 3 for $249: ( HEALTHCARE ) - Doctors (34 different specialties) - Chiropractors - Alternative Medicine - Dentists - Veterinarians - Hospitals - National Health Service Corp Clinics - Nursing Homes - Pharmaceutical Companies - Physical Therapists - Oncology Doctors - US Surgery Centers - Massage Therapists - Acupuncturists - Medical Equipment Suppliers - Mental Health Counselors - Visiting Nurses & RN's - Optometrists - Psychologists ( BUSINESS LISTS ) - Hotels - Real Estate Agents - American Business Email List - US New Business Database - Manufacturers Database - Financial Planners Database - Finance and Money Professionals Database ( CONSUMER LISTS ) - American Consumer Database - Credit Inquiries Database - American Homeowners ( PROFESSIONALS LISTS ) - USA Lawyers Database - Police and Sheriff Services - Criminal Attorneys - 142,906 email me here for counts & samples: maximumresults(a)gmx.us you must press here to stop the mail please send an email to purgefile(a)gmx.com

1 0

[U-Boot] American Consumer email lists
by von Price 27 Oct '10

27 Oct '10

Order this week and save. Take any individual list for $99 or 3 for $249: HEALTHCARE > Doctors (34 different specialties) > Chiropractors > Alternative Medicine > Dentists > Veterinarians > Hospitals > Pharmaceutical Companies > Physical Therapists > Oncology Doctors > US Surgery Centers > Massage Therapists > Acupuncturists > Medical Equipment Suppliers > Mental Health Counselors > Psychologists BUSINESS LISTS > Real Estate Agents > US New Business Database > Financial Planners Database > Finance and Money Professionals Database PROFESSIONALS LISTS > USA Lawyers Database > Criminal Attorneys - 142,906 Send me an email here for samples and stats: maximumresults(a)gmx.us Forward email to purgefile(a)gmx.com to purge you from our records

1 0

[U-Boot] Detailed data with many fields for businesses, healthcare and more
by Chelsea Stein 27 Oct '10

27 Oct '10

Save on advertising list costs until this Friday: ANY 2 lists below for just $199 ANY 7 lists below for just $499 [ HEALTHCARE ] > Complete US Physicians Database > Chiropractic Doctors in the USA > American Holistic Medicine Providers/Clinics > General Dentists in the USA > American Veterinarians & Veterinary Clinics > US Hospitals > Nursing Homes int the US > Pharmaceutical Company Employees > Physical/Occupational Therapy Clinics and Therapists in the US > Oncology Physicians in the US > US Surgery Centers > Massage Therapists/Therapy Clinics in America > Acupuncturists/clinics in the US > Medical Equipment Suppliers(USA) > Mental Health Counselors (USA) > Optometrists/Clinics (USA) > Psychologists (USA) [ BUSINESS LISTS ] > Hotels in the USA > Realtors in the USA > USA Business Database > Manufacturer Database (USA) > Financial Planner Database (USA) > Finance & Professionals Database (USA) [ CONSUMER LISTS ] > USA Consumer Database > Credit Inquiries Database (USA) > American Homeowners [ PROFESSIONALS LISTS ] > USA Lawyers Database > Criminal Attorneys in the US Email me for counts, breakdowns and sample spreadsheets: maximumresults(a)gmx.us To invoke no further correspondence status please send an email to purgefile(a)gmx.com

1 0

[U-Boot] [PATCH] cmd_net: drop spurious comma in U_BOOT_CMD
by Mike Frysinger 27 Oct '10

27 Oct '10

Building for boards that have CONFIG_CMD_CDP enabled fail with: cmd_net.c:301: error: expected expression before ',' token Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- common/cmd_net.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/cmd_net.c b/common/cmd_net.c index 44d17db..b131006 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -297,7 +297,7 @@ int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( cdp, 1, 1, do_cdp, - "Perform CDP network configuration", + "Perform CDP network configuration" ); #endif -- 1.7.3.1

2 3