October 2010 - U-Boot

[U-Boot] [PATCH v6 0/10] PPC LBC/TLB cleanups; reginfo command for 85xx
by Becky Bruce 26 Oct '10

26 Oct '10

This somewhat random patch series got its start when I was asked to create a reginfo command for 85xx by one of the internal teams here at FSL to dump the BR/ORs, LAWs, and the TLBCAM entries. As I started doing that, I began to notice that there was a lot of duplicated and inconsistent code for manipulating the TLBs and LBC registers, which, in some cases, would have caused me to have to write extra code to make reginfo useful on multiple platforms. So I decided to clean this up. The bulk of these patches are just merges of duplicated code and renames of things to get to a consistent naming scheme. These really need to be picked up by a single maintainer, as there's a definite dependency chain here; I'll let Kumar and Wolfgang decide who wants it. Changes from last rev: Fix whitespace, missing signoff, added Kim's Acks. Diffstat below. Cheers, Becky MAKEALL | 2 + Makefile | 1 + arch/powerpc/cpu/mpc83xx/cpu.c | 66 ------------ arch/powerpc/cpu/mpc83xx/cpu_init.c | 53 ++-------- arch/powerpc/cpu/mpc83xx/nand_init.c | 4 +- arch/powerpc/cpu/mpc83xx/speed.c | 2 +- arch/powerpc/cpu/mpc85xx/cpu.c | 78 +++------------ arch/powerpc/cpu/mpc85xx/cpu_init.c | 58 +---------- arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 6 +- arch/powerpc/cpu/mpc85xx/speed.c | 5 +- arch/powerpc/cpu/mpc85xx/tlb.c | 70 ++++++++----- arch/powerpc/cpu/mpc86xx/cpu.c | 15 +--- arch/powerpc/cpu/mpc86xx/cpu_init.c | 55 +---------- arch/powerpc/cpu/mpc86xx/speed.c | 5 +- arch/powerpc/cpu/mpc8xxx/Makefile | 3 + arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 134 ++++++++++++++++++++++++ arch/powerpc/include/asm/config.h | 6 + arch/powerpc/include/asm/fsl_law.h | 1 + arch/powerpc/include/asm/fsl_lbc.h | 112 ++++++++++++-------- arch/powerpc/include/asm/immap_83xx.h | 13 ++- arch/powerpc/include/asm/immap_85xx.h | 46 +-------- arch/powerpc/include/asm/immap_86xx.h | 49 +-------- arch/powerpc/include/asm/mmu.h | 2 + board/atum8548/atum8548.c | 2 +- board/esd/vme8349/vme8349.c | 2 +- board/freescale/mpc8313erdb/sdram.c | 2 +- board/freescale/mpc8349emds/mpc8349emds.c | 2 +- board/freescale/mpc8349itx/mpc8349itx.c | 7 +- board/freescale/mpc8360emds/mpc8360emds.c | 6 +- board/freescale/mpc8360erdk/nand.c | 6 +- board/freescale/mpc8540ads/mpc8540ads.c | 8 +- board/freescale/mpc8541cds/mpc8541cds.c | 13 +-- board/freescale/mpc8544ds/mpc8544ds.c | 2 +- board/freescale/mpc8548cds/mpc8548cds.c | 13 +-- board/freescale/mpc8555cds/mpc8555cds.c | 12 +-- board/freescale/mpc8560ads/mpc8560ads.c | 8 +- board/freescale/mpc8568mds/mpc8568mds.c | 11 +-- board/freescale/mpc8569mds/mpc8569mds.c | 2 +- board/mpc8540eval/mpc8540eval.c | 6 +- board/pm854/pm854.c | 2 +- board/pm856/pm856.c | 2 +- board/sbc8349/sbc8349.c | 2 +- board/sbc8548/sbc8548.c | 20 +--- board/sbc8560/sbc8560.c | 6 +- board/sheldon/simpc8313/sdram.c | 2 +- board/sheldon/simpc8313/simpc8313.c | 2 +- board/socrates/socrates.c | 31 +++--- board/tqc/tqm834x/tqm834x.c | 8 +- board/tqc/tqm85xx/nand.c | 12 +- board/tqc/tqm85xx/tqm85xx.c | 35 +++--- board/xes/xpedite5170/xpedite5170.c | 10 +- board/xes/xpedite5200/xpedite5200.c | 11 +- board/xes/xpedite5370/xpedite5370.c | 9 +- common/cmd_reginfo.c | 5 + drivers/misc/fsl_law.c | 131 ++++++++++-------------- drivers/mtd/nand/fsl_elbc_nand.c | 18 ++-- drivers/usb/host/ohci-hcd.c | 11 -- drivers/usb/host/ohci.h | 13 +++ include/configs/MPC8313ERDB.h | 1 + include/configs/MPC8315ERDB.h | 1 + include/configs/MPC837XEMDS.h | 1 + include/configs/MPC837XERDB.h | 1 + include/configs/MPC8536DS.h | 1 + include/configs/MPC8540EVAL.h | 1 + include/configs/MPC8541CDS.h | 1 + include/configs/MPC8544DS.h | 1 + include/configs/MPC8548CDS.h | 1 + include/configs/MPC8555CDS.h | 1 + include/configs/MPC8560ADS.h | 1 + include/configs/MPC8568MDS.h | 1 + include/configs/MPC8569MDS.h | 1 + include/configs/MPC8572DS.h | 1 + include/configs/P1_P2_RDB.h | 1 + include/configs/P2020DS.h | 1 + include/configs/PM854.h | 1 + include/configs/PM856.h | 1 + include/configs/SBC8540.h | 1 + include/configs/SIMPC8313.h | 1 + include/configs/TQM85xx.h | 1 + include/configs/XPEDITE5200.h | 1 + include/configs/XPEDITE5370.h | 2 + include/configs/sbc8548.h | 1 + include/configs/sbc8560.h | 1 + include/configs/socrates.h | 1 + include/configs/stxgp3.h | 1 + include/configs/stxssa.h | 1 + include/mpc85xx.h | 2 - nand_spl/board/freescale/mpc8536ds/nand_boot.c | 5 +- nand_spl/nand_boot_fsl_elbc.c | 4 +- 89 files changed, 527 insertions(+), 731 deletions(-)

5 26

[U-Boot] [PATCH] ARM: use the same branch insn on all architectures
by Wolfgang Denk 26 Oct '10

26 Oct '10

For the "fixloop" implementation in start.S a number of different instructions was used. Unify code so all architectures use "blo" here because it is more robust in case of incorrect alignments. Signed-off-by: Wolfgang Denk <wd(a)denx.de> Cc: Albert ARIBAUD <albert.aribaud(a)free.fr> Cc: Minkyu Kang <mk7.kang(a)samsung.com> Cc: Sandeep Paulraj <s-paulraj(a)ti.com> Cc: Prafulla Wadaskar <prafulla(a)marvell.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Marek Vasut <marek.vasut(a)gmail.com> --- arch/arm/cpu/arm1136/start.S | 2 +- arch/arm/cpu/arm1176/start.S | 2 +- arch/arm/cpu/arm720t/start.S | 2 +- arch/arm/cpu/arm920t/start.S | 2 +- arch/arm/cpu/arm925t/start.S | 2 +- arch/arm/cpu/arm946es/start.S | 2 +- arch/arm/cpu/arm_intcm/start.S | 2 +- arch/arm/cpu/ixp/start.S | 2 +- arch/arm/cpu/lh7a40x/start.S | 2 +- arch/arm/cpu/s3c44b0/start.S | 2 +- arch/arm/cpu/sa1100/start.S | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 29ed065..e30e398 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -262,7 +262,7 @@ fixnext: str r1, [r0] add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - ble fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 24e5bf4..8b2117b 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -305,7 +305,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index d93911f..1f52d58 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -222,7 +222,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 343a760..af7cc59 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -267,7 +267,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index cf18a01..ef876e0 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -259,7 +259,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 077886f..1bc5306 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -228,7 +228,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 07356cb..5fc4a69 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -226,7 +226,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 836c33b..4e169e2 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -351,7 +351,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index d944860..77c96bd 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -240,7 +240,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 20091b2..21550fc 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -212,7 +212,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif /* now copy to sram the interrupt vector diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 8eabb66..6bb84c8 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -216,7 +216,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ -- 1.7.2.3

2 2

[U-Boot] [PATCH] Remove config.mk for da8xxevm based boards.
by Sughosh Ganu 26 Oct '10

26 Oct '10

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file. Signed-off-by: Sughosh Ganu <urwithsughosh(a)gmail.com> --- board/davinci/da8xxevm/config.mk | 43 -------------------------------------- include/configs/da830evm.h | 1 + include/configs/da850evm.h | 1 + 3 files changed, 2 insertions(+), 43 deletions(-) delete mode 100644 board/davinci/da8xxevm/config.mk diff --git a/board/davinci/da8xxevm/config.mk b/board/davinci/da8xxevm/config.mk deleted file mode 100644 index e176f7d..0000000 --- a/board/davinci/da8xxevm/config.mk +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ -# -# Copyright (C) 2007 Sergey Kubushyn <ksi(a)koi8.net> -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> -# David Mueller, ELSOFT AG, <d.mueller(a)elsoft.ch> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Texas Instruments DA8xx EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips). -# Physical Address: -# C000'0000 to C400'0000 -# -# Linux-Kernel is expected to be at C000'8000, entry C000'8000 -# (mem base + reserved) -# -# we load ourself to C108 '0000 - - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0xC1080000 diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 160ece2..4d93482 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -42,6 +42,7 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CONFIG_SYS_TEXT_BASE 0xc1080000 /* * Memory Info diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 7bf6336..523002d 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0xc1080000 /* * Memory Info -- 1.7.0.4

3 2

[U-Boot] [PATCH] arm, bootm: Fix compile warning
by Heiko Schocher 26 Oct '10

26 Oct '10

Fix warning: bootm.c: In function 'bootm_linux_fdt': bootm.c:181: warning: unused variable 's' bootm.c:180: warning: unused variable 'bd' Signed-off-by: Heiko Schocher <hs(a)denx.de> --- arch/arm/lib/bootm.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 2e7b2e1..a1649ee 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -177,8 +177,6 @@ static int fixup_memory_node(void *blob) static int bootm_linux_fdt(int machid, bootm_headers_t *images) { ulong rd_len; - bd_t *bd = gd->bd; - char *s; void (*kernel_entry)(int zero, int dt_machid, void *dtblob); ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; -- 1.7.2.3

2 1

[U-Boot] [PATCH v2] arm1176: fix relocation
by Darius Augulis 26 Oct '10

26 Oct '10

Fix relocation code for arm1176, do it like other ARM CPU's are doing. Tested only with CONFIG_SKIP_RELOCATE_UBOOT defined and using nand_spl (booting from nand). Test done on s3c6410 based board (not yet supported in main line). Signed-off-by: Darius Augulis <augulis.darius(a)gmail.com> --- Changes since v1: - Heiko comments fixed arch/arm/cpu/arm1176/start.S | 143 +++++++++++++++++++++++---------------- arch/arm/cpu/arm1176/u-boot.lds | 15 +++- 2 files changed, 97 insertions(+), 61 deletions(-) diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 24e5bf4..afdc77b 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -115,44 +115,52 @@ _armboot_start: /* * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. */ -.globl _bss_start -_bss_start: - .word __bss_start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start -.globl _datarel_start -_datarel_start: - .word __datarel_start +.globl _datarel_start_ofs +_datarel_start_ofs: + .word __datarel_start - _start -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start +.globl _datarelrolocal_start_ofs +_datarelrolocal_start_ofs: + .word __datarelrolocal_start - _start -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start +.globl _datarellocal_start_ofs +_datarellocal_start_ofs: + .word __datarellocal_start - _start -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start +.globl _datarelro_start_ofs +_datarelro_start_ofs: + .word __datarelro_start - _start -.globl _got_start -_got_start: - .word __got_start +.globl _rel_dyn_start_ofs +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start -.globl _got_end -_got_end: - .word __got_end +.globl _rel_dyn_end_ofs +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start + +.globl _dynsym_start_ofs +_dynsym_start_ofs: + .word __dynsym_start - _start + +#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de /* * the actual reset code @@ -274,9 +282,8 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss @@ -288,24 +295,44 @@ copy_loop: blo copy_loop #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE /* Text base */ - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ @@ -349,13 +376,11 @@ skip_hw_init: clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -377,18 +402,20 @@ clbss_l:str r2, [r0] /* clear loop... */ _nand_boot: .word nand_boot #else - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r +_board_init_r_ofs: + .word board_init_r - _start #endif #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ diff --git a/arch/arm/cpu/arm1176/u-boot.lds b/arch/arm/cpu/arm1176/u-boot.lds index fa640ee..d9ed954 100644 --- a/arch/arm/cpu/arm1176/u-boot.lds +++ b/arch/arm/cpu/arm1176/u-boot.lds @@ -51,11 +51,14 @@ SECTIONS *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } - __got_end = .; . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } @@ -65,4 +68,10 @@ SECTIONS __bss_start = .; .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } _end = .; + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } }

2 1

[U-Boot] [PATCH] ARM: fix address setup in start.S
by Darius Augulis 26 Oct '10

26 Oct '10

Fix address setup bug for ARM. This bug stops u-boot booting if CONFIG_SKIP_RELOCATE_UBOOT is defined. Signed-off-by: Darius Augulis <augulis.darius(a)gmail.com> --- arch/arm/cpu/arm1136/start.S | 6 ++++-- arch/arm/cpu/arm926ejs/start.S | 6 ++++-- arch/arm/cpu/armv7/start.S | 6 ++++-- arch/arm/cpu/pxa/start.S | 6 ++++-- 4 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 29ed065..6a82310 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -296,8 +296,10 @@ _nand_boot_ofs jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 863de3b..e7e985a 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -286,8 +286,10 @@ _nand_boot_ofs: #else ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 64c86e9..91e0523 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -274,8 +274,10 @@ clbss_l:str r2, [r0] /* clear loop... */ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 3c5bd84..73166c8 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -330,8 +330,10 @@ _start_oneboot_ofs #else ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */

2 1

[U-Boot] [PATCH 2/2] Add board support for hawkboard
by Sughosh Ganu 26 Oct '10

26 Oct '10

The patch adds basic board support for TI's OMAP-L138 based Hawkboard. This board is pretty similar to the da850 EVM. Support for nand and network access is added in this version. The following bootup procedure is used. At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand controllers and copies the second stage bootloader(nand_spl) to RAM. The secondary bootloader then copies u-boot from a predefined location in the nand flash to the RAM, and passes control to the u-boot image. Three config options are supported * hawkboard_config - Used to create the u-boot.bin. Tftp the u-boot.bin image to the RAM from u-boot, and flash to the nand flash at address 0xe0000. * hawkboard_nand_config - Used to generate the secondary bootloader(nand_spl) image. This creates an elf file u-boot-spl under nand_spl/. Create an AIS signed image using this file, and flash it to the nand flash at address 0x20000. The ais file should fit in one block. * hawkboard_uart_config - This is same as the first image, but with the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS Signed bin, as use the normal UART boot procedure to boot the image. Signed-off-by: Sughosh Ganu <urwithsughosh(a)gmail.com> --- Makefile | 17 +++ arch/arm/cpu/arm926ejs/davinci/cpu.c | 2 + arch/arm/include/asm/arch-davinci/hardware.h | 5 +- board/davinci/common/misc.c | 2 + board/davinci/da8xxevm/Makefile | 1 + board/davinci/da8xxevm/config.mk | 3 + board/davinci/da8xxevm/hawkboard.c | 201 ++++++++++++++++++++++++++ drivers/mtd/nand/davinci_nand.c | 1 + include/configs/hawkboard.h | 200 +++++++++++++++++++++++++ nand_spl/board/davinci/da8xxevm/Makefile | 141 ++++++++++++++++++ nand_spl/board/davinci/da8xxevm/config.mk | 40 +++++ nand_spl/board/davinci/da8xxevm/u-boot.lds | 75 ++++++++++ nand_spl/nand_boot.c | 3 +- 13 files changed, 689 insertions(+), 2 deletions(-) create mode 100644 board/davinci/da8xxevm/hawkboard.c create mode 100644 include/configs/hawkboard.h create mode 100644 nand_spl/board/davinci/da8xxevm/Makefile create mode 100644 nand_spl/board/davinci/da8xxevm/config.mk create mode 100644 nand_spl/board/davinci/da8xxevm/u-boot.lds diff --git a/Makefile b/Makefile index 06c71a2..7b8152c 100644 --- a/Makefile +++ b/Makefile @@ -911,6 +911,23 @@ cp922_XA10_config \ cp1026_config: unconfig @board/armltd/integrator/split_by_variant.sh cp $@ +hawkboard_config \ +hawkboard_uart_config \ +hawkboard_nand_config : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/davinci/da8xxevm + @if [ -n "$(findstring _nand_,$@)" ]; then \ + echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ + echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk; \ + echo "CONFIG_SYS_TEXT_BASE = 0xc1080000" >$(obj)board/davinci/da8xxevm/config.tmp; \ + elif [ -n "$(findstring _uart_,$@)" ]; then \ + echo "CONFIG_SYS_TEXT_BASE = 0xc1080000" >$(obj)board/davinci/da8xxevm/config.tmp; \ + else \ + echo "CONFIG_SYS_TEXT_BASE = 0xc1180000" >$(obj)board/davinci/da8xxevm/config.tmp; \ + fi + + @$(MKCONFIG) -n $@ -a hawkboard arm arm926ejs da8xxevm davinci davinci + nhk8815_config \ nhk8815_onenand_config: unconfig @mkdir -p $(obj)include diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c index fc3551c..b4a7382 100644 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c @@ -109,6 +109,7 @@ out: } #endif /* CONFIG_SOC_DA8XX */ +#if !defined(CONFIG_NAND_SPL) #ifdef CONFIG_DISPLAY_CPUINFO static unsigned pll_div(volatile void *pllbase, unsigned offset) @@ -189,3 +190,4 @@ int cpu_eth_init(bd_t *bis) #endif return 0; } +#endif /* !CONFIG_NAND_SPL */ diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 3520cf8..d006ac1 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -379,7 +379,10 @@ int clk_get(enum davinci_clk_ids id); /* Boot config */ struct davinci_syscfg_regs { dv_reg revid; - dv_reg rsvd[71]; + dv_reg rsvd[13]; + dv_reg kick0; + dv_reg kick1; + dv_reg rsvd1[56]; dv_reg pinmux[20]; dv_reg suspsrc; dv_reg chipsig; diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 28750b1..546fd93 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -33,6 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; +#if !defined(CONFIG_NAND_SPL) #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int dram_init(void) { @@ -105,6 +106,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) } #endif /* DAVINCI_EMAC */ +#endif /* !CONFIG_NAND_SPL */ /* * Change the setting of a pin multiplexer field. diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile index 17cbe86..1a67351 100644 --- a/board/davinci/da8xxevm/Makefile +++ b/board/davinci/da8xxevm/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += common.o COBJS-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o COBJS-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o +COBJS-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o COBJS := $(COBJS-y) diff --git a/board/davinci/da8xxevm/config.mk b/board/davinci/da8xxevm/config.mk index e176f7d..9fc7ad9 100644 --- a/board/davinci/da8xxevm/config.mk +++ b/board/davinci/da8xxevm/config.mk @@ -38,6 +38,9 @@ # # we load ourself to C108 '0000 +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp #Provide at least 16MB spacing between us and the Linux Kernel image +ifndef CONFIG_SYS_TEXT_BASE CONFIG_SYS_TEXT_BASE = 0xC1080000 +endif diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c new file mode 100644 index 0000000..904741f --- /dev/null +++ b/board/davinci/da8xxevm/hawkboard.c @@ -0,0 +1,201 @@ +/* + * Modified for Hawkboard - Syed Mohammed Khasim <khasim(a)beagleboard.org> + * + * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. <nsekhar(a)ti.com> + * Copyright (C) 2007 Sergey Kubushyn <ksi(a)koi8.net> + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emac_defs.h> +#include <asm/io.h> +#include <davinci_misc.h> +#include <ns16550.h> +#include <da8xx_common.h> +DECLARE_GLOBAL_DATA_PTR; + +#define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) +#define HAWKBOARD_KICK0_UNLOCK 0x83e70b13 +#define HAWKBOARD_KICK1_UNLOCK 0x95a4f1e0 + +static const struct pinmux_config mii_pins[] = { + { pinmux(2), 8, 1 }, + { pinmux(2), 8, 2 }, + { pinmux(2), 8, 3 }, + { pinmux(2), 8, 4 }, + { pinmux(2), 8, 5 }, + { pinmux(2), 8, 6 }, + { pinmux(2), 8, 7 } +}; + +static const struct pinmux_config mdio_pins[] = { + { pinmux(4), 8, 0 }, + { pinmux(4), 8, 1 } +}; + +static const struct pinmux_config nand_pins[] = { + { pinmux(7), 1, 1 }, + { pinmux(7), 1, 2 }, + { pinmux(7), 1, 4 }, + { pinmux(7), 1, 5 }, + { pinmux(9), 1, 0 }, + { pinmux(9), 1, 1 }, + { pinmux(9), 1, 2 }, + { pinmux(9), 1, 3 }, + { pinmux(9), 1, 4 }, + { pinmux(9), 1, 5 }, + { pinmux(9), 1, 6 }, + { pinmux(9), 1, 7 }, + { pinmux(12),1, 5 }, + { pinmux(12),1, 6 } +}; + +static const struct pinmux_config uart2_pins[] = { + { pinmux(0), 4, 6 }, + { pinmux(0), 4, 7 }, + { pinmux(4), 2, 4 }, + { pinmux(4), 2, 5 } +}; + +static const struct pinmux_config i2c_pins[] = { + { pinmux(4), 2, 4 }, + { pinmux(4), 2, 5 } +}; + +static const struct pinmux_resource pinmuxes[] = { + PINMUX_ITEM(mii_pins), + PINMUX_ITEM(mdio_pins), + PINMUX_ITEM(i2c_pins), + PINMUX_ITEM(nand_pins), + PINMUX_ITEM(uart2_pins), +}; + +static const struct lpsc_resource lpsc[] = { + { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ + { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ + { DAVINCI_LPSC_EMAC }, /* image download */ + { DAVINCI_LPSC_UART2 }, /* console */ + { DAVINCI_LPSC_GPIO }, +}; + +#if !defined(CONFIG_NAND_SPL) +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_HAWKBOARD; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + return 0; +} + +int board_early_init_f(void) +{ + /* + * Kick Registers need to be set to allow access to Pin Mux registers + */ + writel(HAWKBOARD_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); + writel(HAWKBOARD_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); + + /* set cfgchip3 to select mii */ + writel(readl(&davinci_syscfg_regs->cfgchip3) & + ~(1 << 8), &davinci_syscfg_regs->cfgchip3); + + return(0); +} + +int misc_init_r (void) +{ + printf ("ARM Clock : %d Hz\n", clk_get(DAVINCI_ARM_CLKID)); + + return(0); +} +#else /* !defined CONFIG_NAND_SPL */ +void board_init_f (ulong bootflag) +{ + unsigned int chipcfg3; + /* + * Kick Registers need to be set to allow access to Pin Mux registers + */ + writel(HAWKBOARD_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); + writel(HAWKBOARD_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); + + /* setup the SUSPSRC for ARM to control emulation suspend */ + writel(readl(&davinci_syscfg_regs->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART2), &davinci_syscfg_regs->suspsrc); + + /* Power on required peripherals + * ARM does not have acess by default to PSC0 and PSC1 + * assuming here that the DSP bootloader has set the IOPU + * such that PSC access is available to ARM + */ + da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)); + + /* configure pinmux settings */ + davinci_configure_pin_mux_items(pinmuxes, + ARRAY_SIZE(pinmuxes)); + + writel(readl(&davinci_uart2_ctrl_regs->pwremu_mgmt) | + (DAVINCI_UART_PWREMU_MGMT_FREE) | + (DAVINCI_UART_PWREMU_MGMT_URRST) | + (DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart2_ctrl_regs->pwremu_mgmt); + + NS16550_init((NS16550_t)(DAVINCI_UART2_BASE), + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + + puts("Nand boot...\n"); + + relocate_code (CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, + CONFIG_SYS_NAND_U_BOOT_DST); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + nand_boot(); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} + +void putc(char c) +{ + if (gd->flags & GD_FLG_SILENT) + return; + + if (c == '\n') + NS16550_putc((NS16550_t)(DAVINCI_UART2_BASE), '\r'); + + NS16550_putc((NS16550_t)(DAVINCI_UART2_BASE), c); +} + +void hang (void) +{ + puts ("### ERROR ### Please RESET the board ###\n"); + for (;;); +} +#endif diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index d41579c..ad70dd9 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -635,6 +635,7 @@ void davinci_nand_init(struct nand_chip *nand) nand->write_buf = nand_davinci_write_buf; nand->dev_ready = nand_davinci_dev_ready; + nand->select_chip = NULL; nand_flash_init(); } diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h new file mode 100644 index 0000000..c50d404 --- /dev/null +++ b/include/configs/hawkboard.h @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi(a)koi8.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_SYS_USE_NAND 1 + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_HAWK +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#if defined CONFIG_NAND_SPL +#define CONFIG_SKIP_RELOCATE_UBOOT /* no code relocation needed for nand boot */ +#endif +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ + CONFIG_SYS_GBL_DATA_SIZE) + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Network & Ethernet Configuration + */ +#define CONFIG_EMAC_MDIO_PHY_NUM 0x7 +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI + +/* + * Nand Flash + */ +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_CLE_MASK 0x10 +#define CONFIG_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CFG_DAVINCI_STD_NAND_LAYOUT +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE_LIST {0x62000000, } +#define NAND_MAX_CHIPS 1 +/* Block 0--not used by bootcode */ +#define CONFIG_ENV_OFFSET 0x0 + +#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ + CONFIG_SYS_NAND_U_BOOT_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE/ CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS) + +#endif + +/* + * U-Boot general configuration + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,4M ip=static" +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifdef CONFIG_SYS_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#endif + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#endif /* __CONFIG_H */ diff --git a/nand_spl/board/davinci/da8xxevm/Makefile b/nand_spl/board/davinci/da8xxevm/Makefile new file mode 100644 index 0000000..529fef5 --- /dev/null +++ b/nand_spl/board/davinci/da8xxevm/Makefile @@ -0,0 +1,141 @@ +# +# (C) Copyright 2006-2007 +# Stefan Roese, DENX Software Engineering, sr(a)denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg(a)denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +CONFIG_NAND_SPL = y + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL + +SOBJS = start.o _udivsi3.o _divsi3.o +COBJS = cpu.o davinci_nand.o ns16550.o div0.o misc.o psc.o common.o hawkboard.o nand_boot.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin \ + $(nandobj)u-boot-spl-16k.bin + +all: $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds + cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + +# create symbolic links for common files + +# from board directory +$(obj)misc.c: + @rm -f $@ + @ln -s $(TOPDIR)/board/davinci/common/misc.c $@ + +# from drivers/mtd/nand directory +$(obj)davinci_nand.c: + @rm -f $@ + @ln -s $(TOPDIR)/drivers/mtd/nand/davinci_nand.c $@ + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $@ + @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@ + +# from drivers/serial directory +$(obj)ns16550.c: + @rm -f $@ + @ln -sf $(TOPDIR)/drivers/serial/ns16550.c $@ + +# from cpu directory +$(obj)start.S: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/start.S $@ + +# from lib directory +$(obj)_udivsi3.S: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/lib/_udivsi3.S $@ + +# from lib directory +$(obj)_divsi3.S: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/lib/_divsi3.S $@ + +# from lib directory +$(obj)div0.c: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/lib/div0.c $@ + +# from SoC directory +$(obj)cpu.c: + @rm -f $@ + @ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/davinci/cpu.c $@ + +# from board directory +$(obj)hawkboard.c: + @rm -f $@ + ln -s $(TOPDIR)/board/davinci/da8xxevm/hawkboard.c $@ + +# from board directory +$(obj)common.c: + @rm -f $@ + ln -s $(TOPDIR)/board/davinci/da8xxevm/common.c $@ + +$(obj)psc.c: + @rm -f $@ + ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/davinci/psc.c $@ + + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/davinci/da8xxevm/config.mk b/nand_spl/board/davinci/da8xxevm/config.mk new file mode 100644 index 0000000..ea071eb --- /dev/null +++ b/nand_spl/board/davinci/da8xxevm/config.mk @@ -0,0 +1,40 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, sr(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# TI OMAP-L138 based Hawkboard + +# TEXT_BASE for SPL: +# +# On hawkboard the SPL is located in SRAM at 0xc1080000. +# +# TEXT_BASE = 0xc1080000 + +include $(TOPDIR)/board/$(BOARDDIR)/config.mk + +# PAD_TO used to generate a 4kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 4096 +PAD_TO := $(shell expr $$[$(CONFIG_SYS_TEXT_BASE) + 4096]) + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff --git a/nand_spl/board/davinci/da8xxevm/u-boot.lds b/nand_spl/board/davinci/da8xxevm/u-boot.lds new file mode 100644 index 0000000..f6ccf08 --- /dev/null +++ b/nand_spl/board/davinci/da8xxevm/u-boot.lds @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj(a)denx.de> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg(a)denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0xc1080000; + + . = ALIGN(4); + .text : + { + start.o (.text) + cpu.o (.text) + nand_boot.o (.text) + + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { + *(.data) + __datarel_start = .; + *(.data.rel) + __datarelrolocal_start = .; + *(.data.rel.ro.local) + __datarellocal_start = .; + *(.data.rel.local) + __datarelro_start = .; + *(.data.rel.ro) + } + + . = ALIGN(4); + __rel_dyn_start = .; + __rel_dyn_end = .; + __dynsym_start = .; + + __got_start = .; + . = ALIGN(4); + .got : { *(.got) } + + __got_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index ccd0af2..3cda41c 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -222,11 +222,12 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs, } #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -void board_init_f (ulong bootflag) +void __board_init_f (ulong bootflag) { relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, CONFIG_SYS_TEXT_BASE); } +void board_init_f (ulong bootflag)__attribute__((weak, alias("__board_init_f"))); #endif /* -- 1.7.0.4

4 7

[U-Boot] u-boot text console
by Kallol Biswas 26 Oct '10

26 Oct '10

Hi, I have a customer request to build BIOS like user interface(UI) for u-boot over serial port? Something like text console with tabs on the top. Each tab will have sub-items just like BIOS. This is for a PPC platform. Is there any existing software/code base that can be used? Regards, Kallol

2 1

[U-Boot] Pull request u-boot-blackfin.git
by Mike Frysinger 26 Oct '10

26 Oct '10

The following changes since commit c163f4478ca72f51b28b55f74addc8fe029d7b83: Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-10-25 08:06:52 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master Mike Frysinger (2): Blackfin: bf527-ezkit-v2: move to boards.cfg Blackfin: adi boards: set compiled size limits MAKEALL | 4 +--- Makefile | 8 -------- boards.cfg | 1 + include/configs/bf548-ezkit.h | 1 + include/configs/bfin_adi_common.h | 3 +++ 5 files changed, 6 insertions(+), 11 deletions(-)

2 1

[U-Boot] Please pull u-boot-ppc4xx/master
by Stefan Roese 26 Oct '10

26 Oct '10

The following changes since commit c163f4478ca72f51b28b55f74addc8fe029d7b83: Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-10-25 08:06:52 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master Dirk Eibach (1): ppc4xx: Add Io and IoCon 405EP board support MAINTAINERS | 2 + board/gdsys/405ep/405ep.c | 93 +++++++++++++++ board/gdsys/405ep/Makefile | 54 +++++++++ board/gdsys/405ep/io.c | 181 +++++++++++++++++++++++++++++ board/gdsys/405ep/iocon.c | 236 ++++++++++++++++++++++++++++++++++++++ board/gdsys/common/Makefile | 58 ++++++++++ board/gdsys/common/fpga.h | 37 ++++++ board/gdsys/common/miiphybb.c | 102 +++++++++++++++++ board/gdsys/common/osd.c | 247 ++++++++++++++++++++++++++++++++++++++++ board/gdsys/common/osd.h | 29 +++++ boards.cfg | 2 + include/configs/io.h | 251 ++++++++++++++++++++++++++++++++++++++++ include/configs/iocon.h | 252 +++++++++++++++++++++++++++++++++++++++++ 13 files changed, 1544 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/405ep/405ep.c create mode 100644 board/gdsys/405ep/Makefile create mode 100644 board/gdsys/405ep/io.c create mode 100644 board/gdsys/405ep/iocon.c create mode 100644 board/gdsys/common/Makefile create mode 100644 board/gdsys/common/fpga.h create mode 100644 board/gdsys/common/miiphybb.c create mode 100644 board/gdsys/common/osd.c create mode 100644 board/gdsys/common/osd.h create mode 100644 include/configs/io.h create mode 100644 include/configs/iocon.h

2 1