Supports most types that support Read-Id and the FM25H20.
Signed-off-by: Reinhard Meyer <u-boot(a)emk-elektronik.de>
---
changes since V5: rebased on current MASTER
drivers/mtd/spi/Makefile | 1 +
drivers/mtd/spi/ramtron.c | 319 ++++++++++++++++++++++++++++++++++
drivers/mtd/spi/spi_flash.c | 8 +
drivers/mtd/spi/spi_flash_internal.h | 1 +
4 files changed, 329 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/spi/ramtron.c
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 4f11b36..a082ca7 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o
COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o
COBJS-$(CONFIG_SPI_FLASH_STMICRO) += stmicro.o
COBJS-$(CONFIG_SPI_FLASH_WINBOND) += winbond.o
+COBJS-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o
COBJS-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
COBJS := $(COBJS-y)
diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c
new file mode 100644
index 0000000..171390d
--- /dev/null
+++ b/drivers/mtd/spi/ramtron.c
@@ -0,0 +1,319 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer(a)emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Note: RAMTRON SPI FRAMs are ferroelectric, nonvolatile RAMs
+ * with an interface identical to SPI flash devices.
+ * However since they behave like RAM there are no delays or
+ * busy polls required. They can sustain read or write at the
+ * allowed SPI bus speed, which can be 40 MHz for some devices.
+ *
+ * Unfortunately some RAMTRON devices do not have a means of
+ * identifying them. They will leave the SO line undriven when
+ * the READ-ID command is issued. It is therefore mandatory
+ * that the MISO line has a proper pull-up, so that READ-ID
+ * will return a row of 0xff. This 0xff pseudo-id will cause
+ * probes by all vendor specific functions that are designed
+ * to handle it. If the MISO line is not pulled up, READ-ID
+ * could return any random noise, even mimicking another
+ * device.
+ *
+ * We use CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ * to define which device will be assumed after a simple status
+ * register verify. This method is prone to false positive
+ * detection and should therefore be the last to be tried.
+ * Enter it in the last position in the table in spi_flash.c!
+ *
+ * The define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC both activates
+ * compilation of the special handler and defines the device
+ * to assume.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+#include "spi_flash_internal.h"
+
+/* RAMTRON commands common to all devices */
+#define CMD_RAMTRON_WREN 0x06 /* Write Enable */
+#define CMD_RAMTRON_WRDI 0x04 /* Write Disable */
+#define CMD_RAMTRON_RDSR 0x05 /* Read Status Register */
+#define CMD_RAMTRON_WRSR 0x01 /* Write Status Register */
+#define CMD_RAMTRON_READ 0x03 /* Read Data Bytes */
+#define CMD_RAMTRON_WRITE 0x02 /* Write Data Bytes */
+/* not all have those: */
+#define CMD_RAMTRON_FSTRD 0x0b /* Fast Read (for compatibility - not used here) */
+#define CMD_RAMTRON_SLEEP 0xb9 /* Enter Sleep Mode */
+#define CMD_RAMTRON_RDID 0x9f /* Read ID */
+#define CMD_RAMTRON_SNR 0xc3 /* Read Serial Number */
+
+/*
+ * Properties of supported FRAMs
+ * Note: speed is currently not used because we have no method to deliver that
+ * value to the upper layers
+ */
+struct ramtron_spi_fram_params {
+ u32 size; /* size in bytes */
+ u8 addr_len; /* number of address bytes */
+ u8 merge_cmd; /* some address bits are in the command byte */
+ u8 id1; /* device ID 1 (family, density) */
+ u8 id2; /* device ID 2 (sub, rev, rsvd) */
+ u32 speed; /* max. SPI clock in Hz */
+ const char *name; /* name for display and/or matching */
+};
+
+struct ramtron_spi_fram {
+ struct spi_flash flash;
+ const struct ramtron_spi_fram_params *params;
+};
+
+static inline struct ramtron_spi_fram *to_ramtron_spi_fram(struct spi_flash
+ *flash)
+{
+ return container_of(flash, struct ramtron_spi_fram, flash);
+}
+
+/*
+ * table describing supported FRAM chips:
+ * chips without RDID command must have the values 0xff for id1 and id2
+ */
+static const struct ramtron_spi_fram_params ramtron_spi_fram_table[] = {
+ {
+ .size = 32*1024,
+ .addr_len = 2,
+ .merge_cmd = 0,
+ .id1 = 0x22,
+ .id2 = 0x00,
+ .speed = 40000000,
+ .name = "FM25V02",
+ },
+ {
+ .size = 32*1024,
+ .addr_len = 2,
+ .merge_cmd = 0,
+ .id1 = 0x22,
+ .id2 = 0x01,
+ .speed = 40000000,
+ .name = "FM25VN02",
+ },
+ {
+ .size = 64*1024,
+ .addr_len = 2,
+ .merge_cmd = 0,
+ .id1 = 0x23,
+ .id2 = 0x00,
+ .speed = 40000000,
+ .name = "FM25V05",
+ },
+ {
+ .size = 64*1024,
+ .addr_len = 2,
+ .merge_cmd = 0,
+ .id1 = 0x23,
+ .id2 = 0x01,
+ .speed = 40000000,
+ .name = "FM25VN05",
+ },
+ {
+ .size = 128*1024,
+ .addr_len = 3,
+ .merge_cmd = 0,
+ .id1 = 0x24,
+ .id2 = 0x00,
+ .speed = 40000000,
+ .name = "FM25V10",
+ },
+ {
+ .size = 128*1024,
+ .addr_len = 3,
+ .merge_cmd = 0,
+ .id1 = 0x24,
+ .id2 = 0x01,
+ .speed = 40000000,
+ .name = "FM25VN10",
+ },
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ {
+ .size = 256*1024,
+ .addr_len = 3,
+ .merge_cmd = 0,
+ .id1 = 0xff,
+ .id2 = 0xff,
+ .speed = 40000000,
+ .name = "FM25H20",
+ },
+#endif
+};
+
+static int ramtron_common(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf, u8 command)
+{
+ struct ramtron_spi_fram *sn = to_ramtron_spi_fram(flash);
+ u8 cmd[4];
+ int cmd_len;
+ int ret;
+
+ if (sn->params->addr_len == 3 && sn->params->merge_cmd == 0) {
+ cmd[0] = command;
+ cmd[1] = offset >> 16;
+ cmd[2] = offset >> 8;
+ cmd[3] = offset;
+ cmd_len = 4;
+ } else if (sn->params->addr_len == 2 && sn->params->merge_cmd == 0) {
+ cmd[0] = command;
+ cmd[1] = offset >> 8;
+ cmd[2] = offset;
+ cmd_len = 3;
+ } else {
+ printf("SF: unsupported addr_len or merge_cmd\n");
+ return -1;
+ }
+
+ /* claim the bus */
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ if (command == CMD_RAMTRON_WRITE) {
+ /* send WREN */
+ ret = spi_flash_cmd(flash->spi, CMD_RAMTRON_WREN, NULL, 0);
+ if (ret < 0) {
+ debug("SF: Enabling Write failed\n");
+ goto releasebus;
+ }
+ }
+
+ /* do the transaction */
+ if (command == CMD_RAMTRON_WRITE)
+ ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, buf, len);
+ else
+ ret = spi_flash_cmd_read(flash->spi, cmd, cmd_len, buf, len);
+ if (ret < 0)
+ debug("SF: Transaction failed\n");
+
+releasebus:
+ /* release the bus */
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+static int ramtron_read(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf)
+{
+ return ramtron_common(flash, offset, len, buf,
+ CMD_RAMTRON_READ);
+}
+
+static int ramtron_write(struct spi_flash *flash,
+ u32 offset, size_t len, const void *buf)
+{
+ return ramtron_common(flash, offset, len, (void *)buf,
+ CMD_RAMTRON_WRITE);
+}
+
+int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+ debug("SF: Erase of RAMTRON FRAMs is pointless\n");
+ return -1;
+}
+
+/*
+ * nore: we are called here with idcode pointing to the first non-0x7f byte
+ * already!
+ */
+struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode)
+{
+ const struct ramtron_spi_fram_params *params;
+ struct ramtron_spi_fram *sn;
+ unsigned int i;
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ int ret;
+ u8 sr;
+#endif
+
+ /* NOTE: the bus has been claimed before this function is called! */
+ switch (idcode[0]) {
+ case 0xc2:
+ /* JEDEC conformant RAMTRON id */
+ for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
+ params = &ramtron_spi_fram_table[i];
+ if (idcode[1] == params->id1 && idcode[2] == params->id2)
+ goto found;
+ }
+ break;
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ case 0xff:
+ /*
+ * probably open MISO line, pulled up.
+ * We COULD have a non JEDEC conformant FRAM here,
+ * read the status register to verify
+ */
+ ret = spi_flash_cmd(spi, CMD_RAMTRON_RDSR, &sr, 1);
+ if (ret)
+ return NULL;
+
+ /* Bits 5,4,0 are fixed 0 for all devices */
+ if ((sr & 0x31) != 0x00)
+ return NULL;
+ /* now find the device */
+ for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
+ params = &ramtron_spi_fram_table[i];
+ if (!strcmp(params->name, CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC))
+ goto found;
+ }
+ debug("SF: Unsupported non-JEDEC RAMTRON device "
+ CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC "\n");
+ break;
+#endif
+ default:
+ break;
+ }
+
+ /* arriving here means no method has found a device we can handle */
+ debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n",
+ idcode[0], idcode[1], idcode[2]);
+ return NULL;
+
+found:
+ sn = malloc(sizeof(*sn));
+ if (!sn) {
+ debug("SF: Failed to allocate memory\n");
+ return NULL;
+ }
+
+ sn->params = params;
+ sn->flash.spi = spi;
+ sn->flash.name = params->name;
+
+ sn->flash.write = ramtron_write;
+ sn->flash.read = ramtron_read;
+ sn->flash.erase = ramtron_erase;
+ sn->flash.size = params->size;
+
+ printf("SF: Detected %s with size ", params->name);
+ print_size(sn->flash.size, "\n");
+
+ return &sn->flash;
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index b4ba1dd..ab02ef3 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -146,10 +146,18 @@ static const struct {
#ifdef CONFIG_SPI_FLASH_WINBOND
{ 0, 0xef, spi_flash_probe_winbond, },
#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON
+ { 6, 0xc2, spi_fram_probe_ramtron, },
+# undef IDCODE_CONT_LEN
+# define IDCODE_CONT_LEN 6
+#endif
/* Keep it sorted by best detection */
#ifdef CONFIG_SPI_FLASH_STMICRO
{ 0, 0xff, spi_flash_probe_stmicro, },
#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ { 0, 0xff, spi_fram_probe_ramtron, },
+#endif
};
#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 08546fb..9bc43dd 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -50,3 +50,4 @@ struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
--
1.5.6.5
