July 2009 - U-Boot

[U-Boot] how to add mmc/sd support in 6410 u-boot?
by Michael Lin 30 Jul '09

30 Jul '09

hello, everyone. Has somebody ported U-boot to s3c6410? I want add mmc/sd reading and writing in 6410 u-boot. Can somebody give me some hints? Thanks in advance. -------------- Michael L. Jul 30, 2009

2 1

Re: [U-Boot] U-boot hangs in mtest in MPC8280 Board
by Heiko Schocher 30 Jul '09

30 Jul '09

Hello GurumurthyGowdar, GurumurthyGowdar wrote: > On Thu, 30 Jul 2009 12:54:31 +0530 wrote >> Hello GurumurthyGowdar, >> >> GurumurthyGowdar wrote: >>> i am using MPC8280 in our board which has 512MB of SDRAM i.e. from micron. >> Is this board in mainline, so I can look in the Source Code? > yes this board is in mainline.only one board. And which board is it? As I saw in your log, it uses the "normal" mtest. Try to use CONFIG_SYS_ALT_MEMTEST instead. (Hopefully, this is available in 1.3.1 ...) >> Which u-boot version? > U-boot version is 1.3.1. Hmm.. this is very old ... >> Which SDRAMs? > SDRAM is MT48LC32M16A2 from Micron. >>> when i give command mtest only for 1MB to check memory test from U-boot, machine check and program exception is coming after 40 - 60mins later it hangs giving program check exception >> Hmm... maybe problems with your SDRAMs? > if it is SDRAM problem it should not work for 1hour also i think. Why not? >> Is this error shown always after 40-60 mins, not sometimes also earlier? > maximum i am able to run mtest for 1hr 30 mins. sometimes it hangs with 45mins also. Not earlier? Hmm... >> Can you boot a Linux Kernel for example? > No. our job is to only give the board with U-boot boot loader, Linux booting is done by our client. But you can try it ... This would help here, to stress more the SDRAMs ... also you can do better memtests there/with it. >>> i have checked the SDRAM configuration settings everything is fine as per the device datasheet. >>> >>> please i want to know where is the problem, what is the cause for this exception. why memory test fails after 40-60mins. >>> >>> error output is as attached:- >>> >>> MPC8260 Reset Status: Check Stop, External Soft, External Hard >>> >>> MPC8260 Clock Configuration >>> - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 >>> - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 >>> - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 >>> - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 >>> >>> CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz >>> Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. >>> I2C: ready >>> DRAM: 512 MB >>> FLASH: 256.5 MB If this is one chip, are there really 256,5 MB ? >>> *** Warning - bad CRC, using default environment >>> >>> NIP: 1FFE8A30 XER: 00000000 LR: 1FFE899CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 >>> MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 >>> >>> GPR00: 446BA781 1FFA1EE0 EFFFFFFF 3A858DD6 1FFA9F3C 000080C4 1FFA201D 3D313135 >>> GPR08: 1FFF0314 NIP: 1FFE9648 XER: 20000000 LR: 1FFE93DC REGS: 1ffa1a68 TRAP: 0700 DAR: 00000000 >>> MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 >>> >>> GPR00: 00000030 1FFA1B58 EFFFFFFF 1FFA1C1C 00000000 00000010 FFFFFFFF 00000030 >>> GPR08: 00000041 00000000 00000000 00000002 1FFA1B60 FFF7FEFF 1FFFE000 DFFD2000 >>> GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 00003002 1FFA1DE0 1FFF47F8 1FFA1BD0 >>> GPR24: 1FFA1C14 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFF$EBBC FFFFFFFF >>> Call backtraace: >>> Program Check Exception >> I cannot see here in this log, where you typed mtest ... > > please see the attachment in this mail.i have captured the log file from hyper terminal. Hmm.. I looked in the log. Is this right, that if you get this error u-boot never returns to the shell prompt? Also from your log: Pattern 0000158A Writing... Reading... Mem error @ 0x0071E65C: found 00008F3F, expected 00008F21 ^^ ^^ Pattern FFFFEA75 Writing... Reading... Mem error @ 0x00723684: found FFFF5CB6, expected FFFF5CD4 ^^ ^^ always the last byte seems broken Is there getting something hot and the board, and maybe disturb this datalines? bye Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

Re: [U-Boot] U-boot hangs in mtest in MPC8280 Board
by GurumurthyGowdar 30 Jul '09

30 Jul '09

On Thu, 30 Jul 2009 15:19:13 +0530 wrote > > >On Thu, 30 Jul 2009 14:41:13 +0530 wrote >> >> >> >> >>On Thu, 30 Jul 2009 12:54:31 +0530 wrote >>>Hello GurumurthyGowdar, >>> >>>GurumurthyGowdar wrote: >>>> i am using MPC8280 in our board which has 512MB of SDRAM i.e. from micron. >>> >>>Is this board in mainline, so I can look in the Source Code? >>yes this board is in mainline.only one board. >> >>>Which u-boot version? >>U-boot version is 1.3.1. >> >>>Which SDRAMs? >>SDRAM is MT48LC32M16A2 from Micron. >>> >>>> when i give command mtest only for 1MB to check memory test from U-boot, machine check and program exception is coming after 40 - 60mins later it hangs giving program check exception >>> >>>Hmm... maybe problems with your SDRAMs? >>if it is SDRAM problem it should not work for 1hour also i think. >> >>>Is this error shown always after 40-60 mins, not sometimes also earlier? >>maximum i am able to run mtest for 1hr 30 mins. sometimes it hangs with 45mins also. >> >>>Can you boot a Linux Kernel for example? >>No. our job is to only give the board with U-boot boot loader, Linux booting is done by our client. >>> >>>> i have checked the SDRAM configuration settings everything is fine as per the device datasheet. >>>> >>>> please i want to know where is the problem, what is the cause for this exception. why memory test fails after 40-60mins. >>>> >>>> error output is as attached:- >>>> >U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) > >MPC8260 Reset Status: External Soft, External Hard > >MPC8260 Clock Configuration > - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 > - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 > - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 > - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 > >CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz >Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. >I2C: ready >DRAM: 512 MB >FLASH: 256.5 MB >*** Warning - bad CRC, using default environment > >In: serial >Out: serial >Err: serial >Net: FCC2 ETHERNET >RIO->mtest 0x00700000 0x00800000 > > >Pattern 00000000 Writing... Reading... >Pattern FFFFFFFF Writing... Reading... >Mem error @ 0x0071E65C: found 00008F3F, expected 00008F21 > >Pattern FFFFEA75 Writing... Reading... >Mem error @ 0x00723684: found FFFF5CB6, expected FFFF5CD4 > >Pattern 0000158B Writing... Reading... >Pattern FFFFEA74 Writing... Reading... >Pattern 0000158C Writing... Reading... >Pattern FFFFEA73 Writing... NIP: 1FFA1F70 XER: 20000000 LR: 1FFA1F6C REGS: 1ffa1cf8 TRAP: 0700 DAR: 00000000 >MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 > >GPR00: 1FFA1F6C 1FFA1DE8 EFFFFFFF 00000000 00000000 00000010 1FFF6E08 00000000 >GPR08: 00000000 FFFFFFD0 00000000 00000000 1FFA1B78 FFF7FEFF 1FFFE000 1FFF44B8 >GPR16: 1FFF6E08 00000000 00000000 00000000 1FFF32D0 1FFF32F8 1FFF32FC 1FFF3308 >GPR24: FFFFFFFF 00000000 00000000 00000000 1FFB2228 00000000 00000000 00000000 >Call backtrace: >Program Check Exception > > >U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) > >MPC8260 Reset Status: Check Stop, External Soft, External Hard > >MPC8260 Clock Configuration > - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 > - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 > - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 > - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 > >CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz >Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. >I2C: ready >DRAM: 512 MB >FLASH: 256.5 MB >*** Warning - bad CRC, using default environment > >In: serial >Out: serial >Err: serial >Net: FCC2 ETHERNET >RIO->NIP: 1FFD5834 XER: 00000000 LR: 1FFD5834 REGS: 1fed8cbe TRAP: 0600 DAR: 1FED8DB6 >MSR: 00003002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 > >GPR00: 1FFD5098 1FED8DAE EFFFFFFF 1FED8DD6 1FED8ECE 00005F81 1FFD5000 1FFF7208 >GPR08: 1FFF7278 F0000080 NIP: 1FFA1DCC XER: 20000000 LR: 1FFA1DCC REGS: 1fed897c TRAP: 0700 DAR: 1FED8DB6 >MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 > >GPR00: 1FFA1DCC 1FED8A6C EFFFFFFF 00000000 1FED8AA0 00000010 FFFFFFFF 00000030 >GPR08: 00000041 F0000088 00000000 F0000091 1FED89EC FFF7FEFF 1FFFE000 1FFF44B8 >GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FED8CAE 00000000 1FFD5098 >GPR24: 1FFD5828 1FFA1DCC 1FFF094C 1FFF0958 1FED8AA0 1FFA1F6C 1FFFE994 1FED8CBE >Call backtrace: >Program Check Exception > > this same thing repeats and hangs , if i press hardware reset also it hangs here.....please help me out to solve this i am not able to identify where is the problem with regards, gurumurthy

1 0

Re: [U-Boot] U-boot hangs in mtest in MPC8280 Board
by GurumurthyGowdar 30 Jul '09

30 Jul '09

On Thu, 30 Jul 2009 14:41:13 +0530 wrote > > > > >On Thu, 30 Jul 2009 12:54:31 +0530 wrote >>Hello GurumurthyGowdar, >> >>GurumurthyGowdar wrote: >>> i am using MPC8280 in our board which has 512MB of SDRAM i.e. from micron. >> >>Is this board in mainline, so I can look in the Source Code? >yes this board is in mainline.only one board. > >>Which u-boot version? >U-boot version is 1.3.1. > >>Which SDRAMs? >SDRAM is MT48LC32M16A2 from Micron. >> >>> when i give command mtest only for 1MB to check memory test from U-boot, machine check and program exception is coming after 40 - 60mins later it hangs giving program check exception >> >>Hmm... maybe problems with your SDRAMs? >if it is SDRAM problem it should not work for 1hour also i think. > >>Is this error shown always after 40-60 mins, not sometimes also earlier? >maximum i am able to run mtest for 1hr 30 mins. sometimes it hangs with 45mins also. > >>Can you boot a Linux Kernel for example? >No. our job is to only give the board with U-boot boot loader, Linux booting is done by our client. >> >>> i have checked the SDRAM configuration settings everything is fine as per the device datasheet. >>> >>> please i want to know where is the problem, what is the cause for this exception. why memory test fails after 40-60mins. >>> >>> error output is as attached:- >>> U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->mtest 0x00700000 0x00800000 Pattern 00000000 Writing... Reading... Pattern FFFFFFFF Writing... Reading... Mem error @ 0x0071E65C: found 00008F3F, expected 00008F21 Pattern FFFFEA75 Writing... Reading... Mem error @ 0x00723684: found FFFF5CB6, expected FFFF5CD4 Pattern 0000158B Writing... Reading... Pattern FFFFEA74 Writing... Reading... Pattern 0000158C Writing... Reading... Pattern FFFFEA73 Writing... NIP: 1FFA1F70 XER: 20000000 LR: 1FFA1F6C REGS: 1ffa1cf8 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFA1F6C 1FFA1DE8 EFFFFFFF 00000000 00000000 00000010 1FFF6E08 00000000 GPR08: 00000000 FFFFFFD0 00000000 00000000 1FFA1B78 FFF7FEFF 1FFFE000 1FFF44B8 GPR16: 1FFF6E08 00000000 00000000 00000000 1FFF32D0 1FFF32F8 1FFF32FC 1FFF3308 GPR24: FFFFFFFF 00000000 00000000 00000000 1FFB2228 00000000 00000000 00000000 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->NIP: 1FFD5834 XER: 00000000 LR: 1FFD5834 REGS: 1fed8cbe TRAP: 0600 DAR: 1FED8DB6 MSR: 00003002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFD5098 1FED8DAE EFFFFFFF 1FED8DD6 1FED8ECE 00005F81 1FFD5000 1FFF7208 GPR08: 1FFF7278 F0000080 NIP: 1FFA1DCC XER: 20000000 LR: 1FFA1DCC REGS: 1fed897c TRAP: 0700 DAR: 1FED8DB6 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFA1DCC 1FED8A6C EFFFFFFF 00000000 1FED8AA0 00000010 FFFFFFFF 00000030 GPR08: 00000041 F0000088 00000000 F0000091 1FED89EC FFF7FEFF 1FFFE000 1FFF44B8 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FED8CAE 00000000 1FFD5098 GPR24: 1FFD5828 1FFA1DCC 1FFF094C 1FFF0958 1FED8AA0 1FFA1F6C 1FFFE994 1FED8CBE Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8A30 XMSR: 83002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 6A43C291 1FFA1EEE0 %lX 5B125912 1FFA96DC 000089924 1FFA201D 3D313135 GPR08: 1FFF0314 00000000 005B1259 00000000 1FFA1CB0 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFD57D4 1FFA1DCC 1FFA1F20 NIP: 1FFE9648 XER: 20000000 LR: 1FFE93DC REGS: 1ffa1a68 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000030 1FFA1B58 EFFFFFFF 1FFA1C1C 00000000 00000010 FFFFFFFF 00000030 GPR08: 00000041 00000000 00000000 00000002 1FFA1B60 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FFdA1DE0 1FFF47F8 1FFA1BD0 GPR24: 1FFA1C14 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFFEBBC FFFFFFFF Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment Machine check in kernel mode. Caused by (from msr): regs 1ffa1df0 Unknown values in msr NIPMSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000000 1FFA1EE0 EFFFFFFF 7FBF7FFF 0000003D 0000000C 1FFA201D GPR08: 1FFF0314 1FFA200C 008639FF 1FFF0314 1FFA1CB0 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 1FFA1FB4 1FFB2010 00000010 3FF92CD0 GPR24: 1FFF7154 0000000C 7FBF7FFF 0000FFFF 00000000 1FFA1FF6C 41B8E8D8 10080000 Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8A58 XER: 00000000 LRR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 007F45CB 1FFA1EE0 EFFFFFFF 37656FÿEC 1FFA8D64 0000929C 3D313135 GPR08: 1FFF0314 00000000 0037656F 7F6A0DBB 1FFA1CBB FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFD587C 0000000C 1FFA1F20 00000000 1FFA2008 1FFA1F6C 1FFFEB88 1FFF715C Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8AA8 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 0x1 ME: 1 IR/DR: 00 GPR00: FB67CEE5 1FFA1EE0 EFFFFFFF C667A66C 1FFA7D2C 0000A2DC 1FFA201D 3D313135 GPR08: 1FFF0314 00000000 00C667A6 FBD44C65 1FFA1CB0 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFD5700 0000000C 1FFA1F20 00000000 1FFA2008 1FFA1F6C 1FFFEB88 %lX Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment Machine check in kernel mode. Caused by (from msr): regs 1ffa1df0 Unknown values in msr NIP: 1FFE8A40 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 0000A237 1FFA1EE0 EFFFFFFF 1D1527B7 1FFA35BC 0000EA4C 1FFA201D 3D313135 GPR08: 1FFF0314 1DB71064 001D1527 C23E7D6B 1FFA1CB0 FFF7FEFF 1FFFE000 cDFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFD57D4 0000000C 1FFA1F20 00000000 1FFA2008 1FFA1F6C 1FFdFEB88 1FFF715C Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE0E78 XER: 00000000 LR: 1FFE1174 REGS: 1ffa1dd8 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE115C 1FFA1EC8 EFFFFFFF 1FFF0CE0 00000010 00000000 00000000 00A7880D GPR08: 1FFD6E8C 1FFA200C 00000000 05309770 28000048 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFF7154 1FFF7154 1FFF0CE0 0000FFFF 00000010 1FFdA1F6C 1FFFE8D8 0000001C Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8A30 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 MSR: %ú¨þ)$ GPR00: DB7AB85A 1FFA1EE0 EFFFFFFF 1091813E 1FFA8F4C 000090B4 1FFA201D 3D313135 GPR08: 1FFF0314 00000000 00109181 00000000 1FFA1CB0 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF6DD0 0000B002 00000001 00000000 1FFD5098 GPR24: 1FFD57D4 1FFF7154 1FFA1F20 00000000 1FFA2008 1FFA1F6C 1FFFEB88 1FFF715C Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: NIP: 1FFE1158 XER: 00000000 LR: 1FFE115C REGS: 1ffa1d80 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE41E4 1FFA1E70 EFFFFFFF 0000003E 0000002B 0000000D 1FFB2220 1FFF7298 GPR08: 1FFF7280 1FFA200C 00000DE1 1FFB2220 1FFA1D60 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E041FFF447C 1FFF6DD0 1FFF84A8 00000001 00000000 1FFD5098 GPR24: 1FFF7154 1FFF7154 1FFF11F0 0000FFFF 00000039 1FFA1F6C 1FFFE8D8 0000003E Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE1238 XER: 00000000 LR: 1FFE1238 REGS: 1ffa1d98 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE1238 1FFA1E88 EFFFFFFF 1FFA200C 00000003 1FFA1ED8 1FFB2168 FFFFFFFF GPR08: 1FFF0314 00B2B178 00DDBA75 1FFF0314 28000048 FFF7FEFF 1FFFE000DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C Machine check in kernel mode. Caused by (from msr): regs 1ffa1a98 Unknown values in msr NIP: FFFFFFFC XER: 20000000 LR: 1FFE254C REGS: 1ffa1a98 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000004 1FFA1B88 EFFFFF2E 11FFA1BBC 1FFA1BBC 00000010 FFFFFFFF 00000030 GPR08: 00000041 FFFFFFFF 00000000 00000009 1FFA1B08 FFFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FFA1D88 00000000 1FFD5098 GPR24: 1FFD57D4 1FFA1ED8 1FFF094C 1FFF0958 1FFA1BBC 1FFA1F6C 1FFFE994 1FFA1D98 Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE41F0 XER: 00000000 LR: 1FFE41F0 REGS: 1ffa1df0 TRAP: 0600 DAR: 1FFA1F86 MSR: 0000b002 EE: 1 PR: ÿ FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE115C 1FFA1EE0 EFFFFFFF 00000028 00000010 00000000 00000000 00A78817 GPR08: 1FFD6E8C 1FFA200C 00000000 05309770 28000048 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFF7154 1FFF7154 1FFF0CD4 0000FFFF 0000001D 1FFA1F6C 1FFFE8D8 00000028 Call backtrace: Alignment Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->NIP: 1FFD7018 XER: 00000000 LR: 1FFD7014 REGS: 1ffa1b90 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFD5098 1FFA1C80 EFFFFFFF 1FFA1CA0 1FFF447C 00000000 1FFF8F18 1FFFF7268 GPR08: 1FFF7278 F0000080 00000002 F0000090 42000088 FFF7FEFF 1FFFE000 1FFF44B8 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FFA1C90 00000000 1FFD5098 GPR24: 1FFD7008 1FFA1DCC 1FFA1DC8 00000005 1FFFD658 1FFA1F6C 1FFFE994 1FFF447C Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNETNIP: 1FFE1158 XER: 00000000 LR: 1FFE115C REGS: 1ffa1d80 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE41E4 1FFA1E70 EFFFFFFF 00000002 1FFEFF91 00000006 1FFA1EA9 FFFFFFFF GPR08: 1FFF7280 1FFA200C FFFFFFFF F0000091 1FFA1D60 FFF7FEFF 1FFFE000 1FFF0CC4 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 1FFF84A8 1FFF84A8 1FFEFF8C 1FFA1EAA GPR24: 1FFF7154 1FFF7154 1FFF11D4 0000FFFF 00000000 1FFA1F6C 1FFFE8D8 00000002 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->NIP: 1FFD7018 XER: 00000000 LR: 1FFD014 REGS: 1ffa1b90 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFD5098 1FFA1C80 EFFFFFFF 1FFA1CA0 1FFF4420 00000000 1FFF8F18 1FFF7268 GPR08: 1FFF7278 F0000080 00000002 F0000090 42000088 FFF7FEFF 1FFFE000 1FFF44B8 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFFF6DD0 00003002 1FFA1C90 00000000 1FFD5098 GPR24: 1FFD7008 1FFA1DCC 1FFA1DC8 00000005 1FFFD658 1FFA1F6C 1FFFE994 1FFF447C Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->NIP: 1FFD7018 XER: 00000000 LR: 1FFD7014 REGS: 1ffa1b90 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFdD5098 1FFA1C80 EFFFFFFF 1FFA1CA0 1FFF$4420 00000000 1FFF8F18 1FFF7268 GPR08: 1FFF7278 F00ÿ00080 00000002 F0000090 42e000088 FFF7FEFF 1FFFE000 1FFF44B8 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FFA1C90 00000000 1FFD5098 GPR24: 1FFD7008 1FFA1DCC 1FFA1DC8 00000005 1FFdFD658 1FFA1F6C 1FFFE994 00000000 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE8AA8 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1d70 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: D5E8E58F 1FFA1E60 EFFFFFFF 0CAD0496 1FFA413C 0000DECC 1FFB2168 FFFFFFFF GPR08: 1FFF0314 00000000 000CAD04 D56041E4 28000048 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 1FFA1FB4 00000003 1FFA1EDC GPR24: 1FFA1EE0 1FFA1ED8 1FFF3B9A 00000003 1FFA2008 1FFA1F6C NIP: 1FFA1EE4 XER: 20000000 LR: 1FFA1ED8 REGS: 1ffa1a70 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFA1ED8 1FFA1B60 EFFFFFFF 00000000 1FFA1B94 00000010 FFFFFFFF 00000030 GPR08: 00000041 F0000088 00000000 F0000091 1FFA1AE0 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FFA1D60 00000000 1FFD5098 GPR24: 1FFD57D4 1FFA1ED8 1FFF094C 1FFF0958 1FFA"1B94 1FFA1F6C 1FFFE99CE0CE8100 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - baad CRC, using default environment Machine check in kernel mode. Caused by (from msr): regs 1ffa1df0 Unknown values in msr NIP: 1FFE8A40 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: 0 FP: %x MEE: 1 IR/DR: 10 GPR00: 00008140 1FFA1EE0 EFFFFFFF 455E1CD9 1FFA30A4 0000EF64 1FFA201D 3D313135 GPR08: 1FFF0314 45DF5C75 04455E1C 6B402E54 1FFA1CB0 FFF7EFF 1FFFE000 DFFD2000 GPR16:1FFF2AB0 %X 1FFF6DD0 00003002 00000001 00000000 1FFD5098 GPR24: 1FFD57D4 1FFA1ED 1FFA1F20 00000000 1FFA2008 1FFA1F6C 1FFFEB88 1FFF715C Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE41F0 XER: 00000000 LR: 1FFE41F0 REGS: 1ffa1df0 TRAP: 0600 DAR: 1FFA1F86 MSR: 0000b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 000 GPR00: 1FFE115C 1FFA1EE0 EFFFFFFF 0000001B 00000000 00000000 00000000 00A7880C GPR08: 1FFD6E8C 1FFA200C 00000000 05309770 28000048 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000010 1FLFD5098 GPR24: 1FFF7154 1FFF7154 1FFF0CD4 0000FFFF 00000010 1FFA1F6C %lX 0000001B Call backtrace: Alignment Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERN®TNIP: 1FFE1158 XER: 00000000 LR: 1FFE115C REGS: 1ffa1d80 TRAP: 0700 DAR: 00000000 NIP: 00000034 XER: 20000000 LR: 1FFE93DC REGS: 1ffba19f8 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000000 1FFA1AE8 EFFFFFFF 1FFA1BC8 00000001 00000010 00000001 00000030 GPR08: 00000001 Machine check in kernel mode. Caused by (from msr): regs 1ffa16f8 Unknown values in msr NIP: FFFFFFFC XER: 20000000 LR: 1FFE254C REGS: 1ffa16f8 TRAP: 0200 DAR: 00000000 MSR: 0000b000 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000004 1FFA17E8 EFFFFFFF 1FFA181C 1FFA181C 00000010 FFFFFFFF 00000030 GPR08: 00000041 FFFFFFFF 00000000 00000003 1FFA1768 FFF7FEFF 1FFFE000 1FFF0CC4 GPR16: 1FFF1240 1FFF1214 NIP: 00000000 XER: 20000000 LR: 00000001 REGS: 1ffa1400 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000001 1FFA"14F0 EFFFFFFF 00000000 1FFA1524 00000010 FFFFFFFF 00000030 GPR08: 00000041 F0000088 00000000 F0000091 1FFA1470 NIP: 1FFE2548 XER: 20000000 LR: 1FFE2518 REGS: 1ffa1100 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000004 1FFA11F0 EFFFFFFF 1FFA1224 1FFA1224 00000010 FFFFFFFF 00000030 GPR08: 00000041 1FFEDA08 00000000 00000009 1FFA1170 FFF7FEFF 1FFFE000 1FFF0CC4 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 00003002 1FFA13F0 00000000 1FFD5098 GPR24: 1FFD57D4 00000001 1FFF094C 1FFF0958 1FFA1224 1FFA1F6C 1FFFE994 1FFA1400 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8A30 XER: 00000000 LR: 1FFE899CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 446BA781 1FFA1EE0 EFFFFFFF 3A858DD6 1FFA9F3C 000080C4 1FFA201D 3D313135 GPR08: 1FFF0314 NIP: 1FFE9648 XER: 20000000 LR: 1FFE93DC REGS: 1ffa1a68 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000030 1FFA1B58 EFFFFFFF 1FFA1C1C 00000000 00000010 FFFFFFFF 00000030 GPR08: 00000041 00000000 00000000 00000002 1FFA1B60 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 00003002 1FFA1DE0 1FFF47F8 1FFA1BD0 GPR24: 1FFA1C14 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFF$EBBC FFFFFFFF Call backtraace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNETNIP: 1FFE41F0 XER: 00000000 LR: 1FFE41F0 REGS: 1ffa1d70 TRAP: 0600 DAR: 1FFA1F06 MSR: 0000b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE115C 1FFA1E60 EFFFFFFF 0000004D 0000002B 00000006 FFFFFFFFF GPR08: 1FFF7280 1FFA200C FFFFFFFF F0000091 1FFA1D60 FFF7FEFF 1FFFE000 1FFF0CC4 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 1FFF84A8 1FFF84A8 1FFEFF8C 1FFA1EAA GPR24: 1FFF7154 1FFF7154 1FFF11D4 0000FFFF 00000039 NIP: 00000000 XER: 20000000 LR: 1FFE93DC REGS: 1ffa19e8 TRAP: 0700 DAR: 1FFA1F06 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000000 1FFA1AD8 EFFFFFFF 1FFA1B94 00000000 00000010 00000000 00000030 GPR08: 00000041 00000008 00000000 00000008 1FFA1AE0 FFF7FEFF 1FFFE000 1FFF0CC4 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 0000B002 1FFA1D60 1FFF47F8 1FFA1B50 GPR24: 1FFA1B94 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFFEBBC FFFFFFFF Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE1158 XER: 00000000 LR: 1FFE115C REGS: 1ffa1e00 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE41E4 1FFA1EF0 EFFFFFFF 00000023 00000010 00000000 00000000 00A7881C GPR08: 1FFD6E8C 1FFA200C 00000000 05309770 28000048 FFF7FEFF 1FFFE02E DFFD2000 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 0000B002 00000001 00000000 GPR24: 1FFF7154 1FFF7154 1FFF0CE0 0000FFFF 0000001D 1FFA1F6C 1FFFE8D8 00000023 Call backtrace: U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->NIP: 1FFD5834 XER: 00000000 LR: 1FFD5834 REGS: 1ff391ee TRAP: 0600 DAR: 1FF392E6 MSR: 00003002 EE: PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFD5098 1FF392DE EFFFFFFF 1FF39306 1FF393FE 00005F81 1FFD5000 1FFF7268 GPR08: 1FFF7278 F0000080 00000002 F0000090 42000080 0028EE00 1FFFE000 1FFF44B8 NIP: 1FFA1F70 XER: 20000000 LR: 1FFA1F6C REGS: 1ff38ebc TRAP: 0700 DAR: 1FF392FC MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFA1F6C 1FF38FAC EFFFFFFF 00000000 1FF38FD0 00000010 FFFFFFFF FFFFFFF U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: Machine check in kernel mode. Caused by (from msr): regs 1ffa1c38 Unknown values in msr NIP: 1FFE2544 XER: 00000000 LR: 1FFE2518 REGS: 1ffa1c38 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000004 1FFA1D28 EFFFFFFF 1FFA1D5C 1FFA1D5C 1FFA1D50 1FFB2168 FFFFFFFF GPR08: 1FFEDA08 00247D29 FFFFFFFF 00000006 28000048 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 80000022 00000001 00000000 00003002 GPR24: 1FF38CE0 1FFF80A8 00000001 1FFB2058 1FFA1D5C 1FFA1F6C 1FFFE994 1FFB2058 Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNETNIP: 1FFE0E78 XER: 00000000 LR: 1FFE1174 REGS: 1ffa1d58 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE115C 1FFA1E48 EFFFFFFF 1FFA1EAA 00000039 1FFA1E28 1FFB2220 FFFFFFFF GPR08: 1FFF7280 1FFA200C FFFFFFFF F0000091 1FFA1D60 0028EE00 1FFFE000 1FFF0CC4 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 1FFF84A8 1FFF84A8 1FFEFF8C 1FFA1EAA GPR24: 1FFF7154 1FFF7154 1FFA1EAA 0000FFFF 00000039 1FFA1F6C 1FFFE8D8 0000004D Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Machine check in kernel mode. Caused by (from msr): regs 1ffa1df0 Unknown values in msr NIP: 1FFE4224 XER: 00000000 LR: 1FFE41F0 REGS: 1ffa1df0 TRAP: 0200 DAR: 00000000 MSR: 0000b000 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE0ED8 1FFA1EE0 EFFFFFFF 000000BB 00000010 00000000 00000000 00A78827 GPR08: 1FFD6E8C 1FFA200C 00000000 05309770 28000048 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 0000B002 00000001 00000000 1FFD5098 GPR24: 1FFF7154 1FFF7154 1FFF7199 1FFF7198 000000FF 1FFA1F6C 1FFFE9F0 0000001C Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FCC2 ETHERNET RIO->NIP: 1FFD5834 XER: 00000000 LR: 1FFD5834 REGS: 1fce8076 TRAP: 0600 DAR: 1FCE816E MSR: 00003002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFD5098 1FCE8166 EFFFFFFF NIP: 00000000 XER: 20000000 LR: 1FFE93DC REGS: 1fce7cac TRAP: 0700 DAR: 1FCE816E MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000000 1FCE7D9C EFFFFFFF 1FCE7E58 00000000 00000010 00000000 00000030 GPR08: 00000041 00000008 00000000 00000008 1FCE7DA4 0028EE00 1FFFE000 1FFF44B8 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FCE8066 1FFF47F8 1FCE7E14 GPR24: 1FCE7E58 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFFEBBC FFFFFFFF Call backtrace: NIP: 1FFE2548 XER: 00000000 LR: 1FFE2518 REGS: 1fce79bc TRAP: 7700 DAR: 1FCE816E MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000004 1FCE7AAC EFFFFFFF 1FCE7AD4 1FCE7AD4 1FCE7C0C FFFFFFFF 00000030 GPR08: 00000041 1FFEDA08 00000000 F0000091 1FCE7A1C 0028EE00 1FFFE000 1FFF44B8 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 1FCE7C9C 00000000 1FFD5098 GPR24: 1FFD57D4 00000041 1FFF094C 00000000 1FCE7AD4 1FFA1F6C 1FFFE994 FFFFFFFF Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial NIP: 1FFE0F18 XER: 00000000 LR: 1FFE0F08 REGS: 1ffa1dd8 TRAP: 0700 DAR: 00000000 MSR: 0008b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 1FFE1174 1FFA1EC8 EFFFFFFF 00000073 0000002B 00000000 00000000 00A78817 GPR08: 1FFD6E8C 1FFA200C 00000000 05309770 28000048 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000_}Õ7ï¿ïW÷_]UÕû³ë½ûÿÿï¾/¸º/ÿöþÙÝ]W¿wÝ7W¯ÿï01 00000000 1FFD5098 GPR24: 1FFF7154 1FFE41E4 FFFFFFFF 0000002B 00000000 1FFFA1F6C 1FFFE8D8 1FFFB199 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Machine check in kernel mode. Caused by (from msr): regs 1ffa1d70 Unknown values in msr NIP: 1FFE8A40 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1d70 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00008E93 1FFA1E60 EFFFFFFF FB5ADF2A 1FFA5D14 0000C2F4 1FFB2168 FFFFFFFF GPR08: 1FFF0314 FBD44C65 00FB5ADF 00C23E7D 28000048 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 1FFA1FB4 00000003 1FFA1EDC 1FFA200C GPR24: 1FFA1EE0 1FFA1ED8 1FFF3BAB 00000003 1FFA2008 1FFA1F6C 1FFFEB88 1FFA2044 Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: Machine check in kernel mode. Caused by (from msr): regs 1ffa1c38 Unknown values in msr NIP: 1FFE2544 XER: 00000000 LR: 1FFE2518 REGS: 1ffa1c38 TRAP: 0200 DAR: 00000000 MSR: 00003000 EEE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000004 1FFA1D28 EFFFFFFF 1FFA1D5C 1FFA1D5C 1FFA1D50 1FFB2168 FFFFFFFF GPR08: 1FFEDA08 00247D29 FFFFFFFF 00000006 28000048 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 11FFD5098 GPR24: 1FFD587C 1FFF80A8 00000001 1FFB2058 1FFdA1D5C 1FFA1F6C 1FFFE994 1FFB2058 Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment Machine check in kernel mode. Caused by (from msr): reegs 1ffa1df0 Unknown values in msr NIP: 1FFE8A40 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0200 DAR: 00000000 MSR: 00003000 E GPPR00: _}Õ7ï¿ïW÷_]UÕû³ë½ûÿÿï¾/¸º/ÿöþÙÝ]W¿wÝ7W¯ÿï42464420 00303030 20450052 3A203030 30303030 3030204C 523A2031 GPR08: 46464538 39434320 52454753 66613164 66302054 5241503A 20303230 GPR16: 30204441 523A2030 30303030 3030300A 00EE001F FFE000DF FD20001F FF2AB01F GPR24: FF8E041F FF447C1F FFF6DD000 00300200 00000100 0000001F FD50981F FD587C1F Call backtrace: machhine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8AA8 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 GPR00: E3A3E210 1FFA1EE0 EFFFFFFF 7FB5CF66 1FFA6094 0000BF74 1FFA201D 3D313135 GPR08: 1FFF0314 00000000 007FB5CF E3630B12 1FFA1CB0 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000000 1FFDÿ5098 GPR24: 1FFD5800 1FFF80A8 1FFA1F20 00000000 1FFA202E 1FFA1F6C 1FFFEB2E 1FFF715C Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Machine check in kernel mode. Caused by (from msr): regs 1ffa1d70 Unknown values in msr NIP: 1FFE8A40 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1d70 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00006F65 1FFA1E60 EFFFFFFF B5BFAA53 1FFAF55C 00002AAC1FFB2168 FFFFFFFF GPR08: 1FFF0314 B5D0CF31 00B5BFAA 00C23E7D 28000048 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E041FFF447C 1FFF6DD0 1FFA1FB4 00000003 1FFA1EDC 1FFA200C GPR24: 1FFA1EE0 1FFA1ED8 1FFF3B9A 00000003 1FFA2008 1FFA1F6C 1FFFEB88 1FFA2028 Call backtrace: machine check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment Machine check in kernel mode. Caused by (from msr): regs 1ffa1df0 Unknown values in msr NIP: 1FFE8A40 XER: 00000000 LR: 1FFE89CC REGS: 1ffa1df0 TRAP: 0200 DAR: 00000000 MSR: 00003000 EE: 0 PR: GPR00: 0000A712 1FFA1EE0 EFFFFFFF 181w05544 1FFA7304 0000AD04 1FFA201D 3D313135 GPR08: 1FFF0314 18B74777 00181055 00C23E7D 1FFA1CB0 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 00000010 1FFD5098 GPR24: 1FFD58000 1FFA1ED8 1FFA1F20 00000000 1FFA2008 1FFA1F6C 1FFFEB88 1FFF$715C Call backtrace: machinne check U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: NIP: 1FLFE97F8 XER: 00000000 LR: 1FFE973C REGS: 1ffa1c28 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000002 1FFA1D18 EFFFFFFF 1FFA1D64 1FFF4788 1FFdA1D58 00000000 006558038 GPR08: 1FFD6E8C 00000032 1FFF4789 00100000 F0003CD8 0028EE00 1FFFE000 DFFD2000 GPR16: 1FFF2AB0 1FFF8E04 1FFF447C 1FFF6DD0 00003002 00000001 1FFFF47F8 1FFA1D20 GPR24: 1FFA1D64 00000000 1FFA1F20 0000004D 1FFA1D64 1FFA1F6C 1FFFEBBC 1FFA1D58 Call backtrace: Program Check Exception U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB U-Boot 1.3.1 (Jul 29 2009 - 22:41:55) MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB >>> >>> i am stuck here, dont know where to check if it hangs after 40-60mins. >> >>Maybe a temperature problem? >not able to identify what is the exact problem tll now >> >>> do help me out in this regard, >> >>If I can ... share more informations, and maybe I can. > >please help me out if you can, let me know if any more informations required. >> >>bye >>Heiko >>-- >>DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel >>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany >>

1 0

[U-Boot] Problem wit MPC8548 TSEC ethernet and Marvell 88E1145 PHY
by Alex Dubov 30 Jul '09

30 Jul '09

I'm trying to setup a new u-boot on an old STx AMC8548 board. I discovered the reason for instability I reported earlier, namely DDR's twoT_en option was not set. However, now I have a different problem. Attempt to access the network always fails with "Got error 4" message. I can see ARP requests being broadcast to the network but nothing else happening. The link speed is 100Mb. STxAMC8548=> mii info PHY 0x10: OUI = 0x5043, Model = 0x0D, Rev = 0x04, 100baseT, FDX PHY 0x11: OUI = 0x5043, Model = 0x0D, Rev = 0x04, 10baseT, HDX PHY 0x12: OUI = 0x5043, Model = 0x0D, Rev = 0x04, 10baseT, HDX PHY 0x1F: OUI = 0x0000, Model = 0x00, Rev = 0x00, 1000baseX, HDX STxAMC8548=> mii dump 0x10 0-5 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset (4000:0000) 0.14 = 0 loopback (2040:0040) 0. 6,13 = b10 speed selection = 1000 Mbps (1000:1000) 0.12 = 1 A/N enable (0800:0000) 0.11 = 0 power-down (0400:0000) 0.10 = 0 isolate (0200:0000) 0. 9 = 0 restart A/N (0100:0100) 0. 8 = 1 duplex = full (0080:0000) 0. 7 = 0 collision test enable (003f:0000) 0. 5- 0 = 0 (reserved) 1. (7969) -- PHY status register -- (8000:0000) 1.15 = 0 100BASE-T4 able (4000:4000) 1.14 = 1 100BASE-X full duplex able (2000:2000) 1.13 = 1 100BASE-X half duplex able (1000:1000) 1.12 = 1 10 Mbps full duplex able (0800:0800) 1.11 = 1 10 Mbps half duplex able (0400:0000) 1.10 = 0 100BASE-T2 full duplex able (0200:0000) 1. 9 = 0 100BASE-T2 half duplex able (0100:0100) 1. 8 = 1 extended status (0080:0000) 1. 7 = 0 (reserved) (0040:0040) 1. 6 = 1 MF preamble suppression (0020:0020) 1. 5 = 1 A/N complete (0010:0000) 1. 4 = 0 remote fault (0008:0008) 1. 3 = 1 A/N able (0004:0000) 1. 2 = 0 link status (0002:0000) 1. 1 = 0 jabber detect (0001:0001) 1. 0 = 1 extended capabilities 2. (0141) -- PHY ID 1 register -- (ffff:0141) 2.15- 0 = 321 OUI portion 3. (0cd4) -- PHY ID 2 register -- (fc00:0c00) 3.15-10 = 3 OUI portion (03f0:00d0) 3. 9- 4 = 13 manufacturer part number (000f:0004) 3. 3- 0 = 4 manufacturer rev. number 4. (01e1) -- Autonegotiation advertisement register -- (8000:0000) 4.15 = 0 next page able (4000:0000) 4.14 = 0 reserved (2000:0000) 4.13 = 0 remote fault (1000:0000) 4.12 = 0 reserved (0800:0000) 4.11 = 0 asymmetric pause (0400:0000) 4.10 = 0 pause enable (0200:0000) 4. 9 = 0 100BASE-T4 able (0100:0100) 4. 8 = 1 100BASE-TX full duplex able (0080:0080) 4. 7 = 1 100BASE-TX able (0040:0040) 4. 6 = 1 10BASE-T full duplex able (0020:0020) 4. 5 = 1 10BASE-T able (001f:0001) 4. 4- 0 = 1 selector = IEEE 802.3 5. (45e1) -- Autonegotiation partner abilities register -- (8000:0000) 5.15 = 0 next page able (4000:4000) 5.14 = 1 acknowledge (2000:0000) 5.13 = 0 remote fault (1000:0000) 5.12 = 0 (reserved) (0800:0000) 5.11 = 0 asymmetric pause able (0400:0400) 5.10 = 1 pause able (0200:0000) 5. 9 = 0 100BASE-T4 able (0100:0100) 5. 8 = 1 100BASE-X full duplex able (0080:0080) 5. 7 = 1 100BASE-TX able (0040:0040) 5. 6 = 1 10BASE-T full duplex able (0020:0020) 5. 5 = 1 10BASE-T able (001f:0001) 5. 4- 0 = 1 selector = IEEE 802.3

1 0

[U-Boot] [PATCH 2/3 V2] tftp: get tftpblocksize from cfg file and env
by Alessandro Rubini 30 Jul '09

30 Jul '09

Raising the block size is useful if CONFIG_IP_DEFRAG is used. Howerver, the last fragments in a burst may overflow the receiving ethernet, so the default is left at 1468, with thre new CONFIG_TFTP_BLOCKSIZE for config files. Further, "tftpblocksize" can be set in the environment. Signed-off-by: Alessandro Rubini <rubini(a)gnudd.com> --- V2: fixed a damned typo in CONFIG_ names Also, I shortened the first line. Sorry for this bad V1. net/tftp.c | 13 +++++++++++-- 1 files changed, 11 insertions(+), 2 deletions(-) diff --git a/net/tftp.c b/net/tftp.c index b0f1cca..34b79c4 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -86,8 +86,14 @@ extern flash_info_t flash_info[]; /* 512 is poor choice for ethernet, MTU is typically 1500. * Minus eth.hdrs thats 1468. Can get 2x better throughput with * almost-MTU block sizes. At least try... fall back to 512 if need be. + * (but those using CONFIG_IP_DEFRAG may want to set a larger block in cfg file) */ +#ifdef CONFIG_TFTP_BLOCKSIZE +#define TFTP_MTU_BLOCKSIZE CONFIG_TFTP_BLOCKSIZE +#else #define TFTP_MTU_BLOCKSIZE 1468 +#endif + static unsigned short TftpBlkSize=TFTP_BLOCK_SIZE; static unsigned short TftpBlkSizeOption=TFTP_MTU_BLOCKSIZE; @@ -475,9 +481,12 @@ TftpTimeout (void) void TftpStart (void) { -#ifdef CONFIG_TFTP_PORT char *ep; /* Environment pointer */ -#endif + + /* Allow the user to choose tftpblocksize */ + if ((ep = getenv("tftpblocksize")) != NULL) + TftpBlkSizeOption = simple_strtol(ep, NULL, 10); + debug("tftp block size is %i\n", TftpBlkSizeOption); TftpServerIP = NetServerIP; if (BootFile[0] == '\0') { -- 1.6.0.2

1 0

[U-Boot] [PATCH 0/3] Defragment IP packets
by Alessandro Rubini 30 Jul '09

30 Jul '09

This patch-set implements the defragment code. PAtch 3 is just for me, to enable it. It may also be a good thing to have, so people can look for actual users and find one. If needed, I'll add another patch for documentation. I've done as RFC815 says although an unlikely insane fragment is not handled (see code and patch comment). Robin's suggestions have been include by two: - ports are not checked (tftp code doesn't check either), only ID - the ckeck is done in an inline function, not in the main function: I agree call/ret is worse than if, but there is no call here. (I split the function in two to make it clear, but it's most likely not even needed). Ben asked: 1. Configurable block size (via a well-named CONFIG). Choose a good default value. Done. The default is as before, as our polling ether may discard pacjets if the burst is too fast. Mine receives only 4-5 fragments, so 8192 is not viable for me (4k works quite good). I suspect some may just cache 1 packet, so even two fragments won't work for them, thus the unchanged default. 2. Handle out-of-order fragments, and some test results showing that it works. This the end of a transfer with 4096 block size: frag 1480 - 1480 frag 0 - 1480 frag 2960 - 1148 ---- done, len 4108 frag 2960 - 1148 frag 0 - 1480 frag 1480 - 1480 ---- done, len 4108 frag 1480 - 1480 frag 0 - 1480 frag 2960 - 1148 ---- done, len 4108 frag 0 - 1480 frag 1480 - 664 ---- done, len 2144 The image, written over zeroed memory, crc'd and booted correctly. Then I removed the prints. 3. Make the feature configurable CONFIG_IP_DEFRAG 4. Test with a TFTP server that doesn't have blksize feature enabled Done. Actually, my code is not called in this case. /alessandro Alessandro Rubini (3): net: defragment IP packets tftp: get the tftp block size from config file and from the environment arm nomadik: select defrag and 4k tftp block size include/configs/nhk8815.h | 3 + net/net.c | 172 +++++++++++++++++++++++++++++++++++++++++++-- net/tftp.c | 13 +++- 3 files changed, 181 insertions(+), 7 deletions(-)

1 3

[U-Boot] U-boot hangs in mtest in MPC8280 Board
by GurumurthyGowdar 30 Jul '09

30 Jul '09

Dear Sir, i am using MPC8280 in our board which has 512MB of SDRAM i.e. from micron. when i give command mtest only for 1MB to check memory test from U-boot, machine check and program exception is coming after 40 - 60mins later it hangs giving program check exception i have checked the SDRAM configuration settings everything is fine as per the device datasheet. please i want to know where is the problem, what is the cause for this exception. why memory test fails after 40-60mins. error output is as attached:- MPC8260 Reset Status: Check Stop, External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300 - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3 - vco_out 528000000, scc_clk 132000000, brg_clk 33000000 - cpu_clk 330000000, cpm_clk 264000000, bus_clk 66000000 CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd. I2C: ready DRAM: 512 MB FLASH: 256.5 MB *** Warning - bad CRC, using default environment NIP: 1FFE8A30 XER: 00000000 LR: 1FFE899CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 446BA781 1FFA1EE0 EFFFFFFF 3A858DD6 1FFA9F3C 000080C4 1FFA201D 3D313135 GPR08: 1FFF0314 NIP: 1FFE9648 XER: 20000000 LR: 1FFE93DC REGS: 1ffa1a68 TRAP: 0700 DAR: 00000000 MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00 GPR00: 00000030 1FFA1B58 EFFFFFFF 1FFA1C1C 00000000 00000010 FFFFFFFF 00000030 GPR08: 00000041 00000000 00000000 00000002 1FFA1B60 FFF7FEFF 1FFFE000 DFFD2000 GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 00003002 1FFA1DE0 1FFF47F8 1FFA1BD0 GPR24: 1FFA1C14 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFF$EBBC FFFFFFFF Call backtraace: Program Check Exception i am stuck here, dont know where to check if it hangs after 40-60mins. do help me out in this regard, Thanks in advance gurumurthy

2 1

[U-Boot] [PATCH] ppc4xx: Support PPC460EX rev B on gdsys CompactCenter
by Dirk Eibach 30 Jul '09

30 Jul '09

This patch is based on a patch for canyonlands by Stefan Roese. Signed-off-by: Dirk Eibach <eibach(a)gdsys.de> --- board/gdsys/compactcenter/compactcenter.c | 16 ++++++++++++---- 1 files changed, 12 insertions(+), 4 deletions(-) diff --git a/board/gdsys/compactcenter/compactcenter.c b/board/gdsys/compactcenter/compactcenter.c index 477ef70..4861cc8 100644 --- a/board/gdsys/compactcenter/compactcenter.c +++ b/board/gdsys/compactcenter/compactcenter.c @@ -39,10 +39,19 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_SYS_BCSR3_PCIE 0x10 -int board_early_init_f(void) +static int pvr_460ex(void) { u32 pvr = get_pvr(); + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) || + (pvr == PVR_460EX_RB)) + return 1; + + return 0; +} + +int board_early_init_f(void) +{ /* * Setup the interrupt controller polarities, triggers, etc. */ @@ -95,7 +104,7 @@ int board_early_init_f(void) mtdcr(AHB_TOP, 0x8000004B); mtdcr(AHB_BOT, 0x8000004B); - if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) { + if (pvr_460ex()) { /* * Configure USB-STP pins as alternate and not GPIO * It seems to be neccessary to configure the STP pins as GPIO @@ -250,7 +259,6 @@ int misc_init_r(void) { u32 sdr0_srst1 = 0; u32 eth_cfg; - u32 pvr = get_pvr(); /* * Set EMAC mode/configuration (GMII, SGMII, RGMII...). @@ -264,7 +272,7 @@ int misc_init_r(void) /* Set the for 2 RGMII mode */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) + if (pvr_460ex()) eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; else eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL; -- 1.5.6.5

2 1

[U-Boot] There is no need to pay thousands for a good medical marketing list
by contrabass 30 Jul '09

30 Jul '09

The Medical Doctor list has contact data for all 50 states and in 34 different specialties. This week it can be purchased at half price. For a datacard reply here Odessa(a)list4discount.net contact rembox(a)list4discount.net for record exclusion.

1 0