February 2009 - U-Boot

[U-Boot] [PATCH 07/12] 83xx: add missing TIMING_CFG1_CASLAT_* defines
by Heiko Schocher 17 Feb '09

17 Feb '09

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/mpc83xx.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 191488a..a004e7b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -887,6 +887,8 @@ #define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 3.0 */ #define TIMING_CFG1_CASLAT_35 0x00060000 /* CAS latency = 3.5 */ #define TIMING_CFG1_CASLAT_40 0x00070000 /* CAS latency = 4.0 */ +#define TIMING_CFG1_CASLAT_45 0x00080000 /* CAS latency = 4.5 */ +#define TIMING_CFG1_CASLAT_50 0x00090000 /* CAS latency = 5.0 */ /* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2 */ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
by Valeriy Glushkov 17 Feb '09

17 Feb '09

This patch allows using of SATA devices connected to the onboard PCI SIL1334 SATA controller. Signed-off-by: Valeriy Glushkov <gvv(a)lstec.com> --- include/configs/MPC8349ITX.h | 23 +++++++++++++++++++++-- 1 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index f1b5566..38a7386 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -78,6 +78,7 @@ #ifdef CONFIG_MPC8349ITX #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ #endif #define CONFIG_PCI @@ -142,7 +143,16 @@ #define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ -#define CONFIG_DOS_PARTITION +#endif + +/* + * SATA + */ +#ifdef CONFIG_SATA_SIL3114 + +#define CONFIG_SYS_SATA_MAX_DEVICE 4 +#define CONFIG_LIBATA +#define CONFIG_LBA48 #endif @@ -454,9 +464,18 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM +#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) + #define CONFIG_DOS_PARTITION + #define CONFIG_CMD_FAT +#endif + #ifdef CONFIG_COMPACT_FLASH #define CONFIG_CMD_IDE - #define CONFIG_CMD_FAT +#endif + +#ifdef CONFIG_SATA_SIL3114 + #define CONFIG_CMD_SATA + #define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_PCI -- 1.5.2.5

2 1

[U-Boot] Please pull mmc_framework from u-boot-mpc85xx.git
by Andy Fleming 17 Feb '09

17 Feb '09

are available in the git repository at: git://www.denx.de/git/u-boot-mpc85xx.git mmc_framework These are all of the MMC patches, gathered together in one place Andy Fleming (7): Eliminate support for using MMC as memory Convert mmc_init to mmc_legacy_init Eliminated arch-specific mmc header requirement Add MMC Framework Add support for the Freescale eSDHC found on 8379 and 8536 SoCs 85xx: Add eSDHC support for 8536 DS 83xx: Add eSDHC support on 8379 EMDS board board/freescale/mpc837xemds/mpc837xemds.c | 23 +- board/freescale/mpc8536ds/mpc8536ds.c | 14 + common/cmd_mem.c | 43 -- common/cmd_mmc.c | 134 ++++- cpu/arm720t/lpc2292/mmc.c | 30 +- cpu/mpc83xx/cpu.c | 14 + cpu/mpc85xx/cpu.c | 15 + cpu/pxa/mmc.c | 18 +- {include/asm-arm/arch-pxa => cpu/pxa}/mmc.h | 0 drivers/mmc/Makefile | 2 + drivers/mmc/atmel_mci.c | 17 +- drivers/mmc/fsl_esdhc.c | 348 ++++++++++ drivers/mmc/mmc.c | 930 +++++++++++++++++++++++++++ include/asm-arm/arch-lpc2292/mmc.h | 22 - include/asm-avr32/arch-at32ap700x/mmc.h | 77 --- include/asm-ppc/immap_83xx.h | 2 + include/asm-ppc/immap_85xx.h | 3 + include/configs/MPC837XEMDS.h | 15 + include/configs/MPC8536DS.h | 14 + include/fsl_esdhc.h | 145 +++++ include/mmc.h | 244 +++++++- include/mpc83xx.h | 3 + lib_ppc/board.c | 9 + 23 files changed, 1904 insertions(+), 218 deletions(-) rename {include/asm-arm/arch-pxa => cpu/pxa}/mmc.h (100%) create mode 100644 drivers/mmc/fsl_esdhc.c create mode 100644 drivers/mmc/mmc.c delete mode 100644 include/asm-arm/arch-lpc2292/mmc.h delete mode 100644 include/asm-avr32/arch-at32ap700x/mmc.h create mode 100644 include/fsl_esdhc.h

2 1

[U-Boot] Please pull u-boot-mpc85xx.git
by Andy Fleming 17 Feb '09

17 Feb '09

are available in the git repository at: git://www.denx.de/git/u-boot-mpc85xx.git master Andy Fleming (4): Add eth_get_dev_by_index Make some minor whitespace changes to eliminate line-wrapping Fixup SGMII PHY ids in the device tree TQM85xx: Fix a couple warnings in TQM8548 build Kumar Gala (7): 85xx: Format cpu freq printing to handle 8 cores fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller 85xx: Fix how we map DDR memory 85xx: Fix address map for 36-bit config of MPC8572DS 85xx: Fix bug in device tree setup in 36-bit physical confg 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS fsl-ddr: Allow system to boot if we have more than 4G of memory Peter Tyser (3): 86xx: Reset update 86xx: Update Global Utilities structure 86xx: Update CPU info output on bootup Poonam_Aggrwal-b10812 (1): 32bit BUg fix for DDR2 on 8572 Srikanth Srinivasan (1): mpc85xx: Add support for the P2020 Wolfgang Grandegger (8): MPC85xx: TQM85xx: fix flash protection for boot loader MPC85xx: TQM85xx: make standard PCI/PCI-X configurable MPC85xx: TQM8548: add support for the TQM8548_BE module MPC85xx: TQM8548: add support for the TQM8548_AG module MPC85xx: TQM8548: fix SDRAM timing for 533 MHz MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration MPC85xx: TQM8548: use cache for AG and BE variants MPC85xx: TQM8548: workaround for erratum DDR 19 and 20 MAKEALL | 2 + Makefile | 12 ++- board/freescale/common/sgmii_riser.c | 65 ++++++++++++ board/freescale/common/sgmii_riser.h | 1 + board/freescale/mpc8536ds/mpc8536ds.c | 5 + board/freescale/mpc8544ds/mpc8544ds.c | 3 + board/freescale/mpc8572ds/mpc8572ds.c | 22 +++- board/freescale/mpc8610hpcd/mpc8610hpcd.c | 8 ++ board/freescale/mpc8641hpcn/mpc8641hpcn.c | 8 ++ board/sbc8641d/sbc8641d.c | 29 +++++ board/tqc/tqm85xx/config.mk | 6 +- board/tqc/tqm85xx/law.c | 2 +- board/tqc/tqm85xx/nand.c | 6 +- board/tqc/tqm85xx/sdram.c | 141 ++++++++++++++++++++++--- board/tqc/tqm85xx/tlb.c | 19 +++- board/tqc/tqm85xx/tqm85xx.c | 15 ++-- cpu/mpc85xx/Makefile | 1 + cpu/mpc85xx/cpu.c | 10 ++- cpu/mpc85xx/ddr-gen3.c | 9 ++- cpu/mpc85xx/tlb.c | 74 +++++--------- cpu/mpc86xx/cpu.c | 162 +++++++++++------------------ cpu/mpc8xxx/ddr/main.c | 2 +- cpu/mpc8xxx/ddr/options.c | 4 + drivers/misc/fsl_law.c | 3 +- include/asm-ppc/config.h | 2 +- include/asm-ppc/fsl_ddr_sdram.h | 17 +++ include/asm-ppc/fsl_law.h | 4 +- include/asm-ppc/immap_85xx.h | 25 ++++- include/asm-ppc/immap_86xx.h | 29 ++++-- include/asm-ppc/processor.h | 12 ++- include/configs/MPC8572DS.h | 10 ++- include/configs/MPC8610HPCD.h | 2 - include/configs/MPC8641HPCN.h | 2 - include/configs/TQM85xx.h | 28 ++++- include/net.h | 31 +++--- net/eth.c | 22 ++++ 36 files changed, 556 insertions(+), 237 deletions(-)

2 1

[U-Boot] proper file encoding
by Mike Frysinger 16 Feb '09

16 Feb '09

is there any statements that i cannot find dictating the proper encoding of files ? considering git itself whines when things are not proper utf8 encoded, i'd expect that this would carry over to the files in u-boot itself. for example, the MAINTAINERS and the CREDITS files are both using iso-8859-1 encoding. this can readily be seen with people who have umlauts in their names, although some places have been avoided by using the ASCII form of "oe" and "ue" rather than ö and ü. i'd certainly prefer if we take a hard stance on documentation and similar files by requiring unicode encoding. i'd prefer all files be unicode, but i wouldnt care nearly as much with source code (comments and such). at any rate, it's easy enough to fix: iconv -f iso-8859-1 -t utf8 MAINTAINERS > f && mv f MAINTAINERS iconv -f iso-8859-1 -t utf8 CREDITS > f && mv f CREDITS ... and probably some more files ... as for why i care: it's a lot easier to copy & paste contact information from these files when creating commit messages if i didnt have to manually fix the broken encoding ... -mike

2 1

[U-Boot] Cant Create FIT uImage
by hendrik 16 Feb '09

16 Feb '09

Hi all I would like to boot using the new style FDT kernel booting. I have been using the guidelines in "u-boot-2009/doc/uImage.FIT/how to" and I have the latests dtc (v1.2) . But I am unable to compile the FIT image. I get a syntax error for line 1: #u-boot/tools/mkimage -f /work/kernel_fdt.its /work/kernel_fdt.itb FIT format handling Trying to execute "dtc -I dts -O dtb -p 500 /work/kernel_fdt.its > /work/kernel_fdt.itb.tmp" DTC: dts->dtb on file "/work/kernel_fdt.its" Error: /work/kernel_fdt.its 1:0 syntax error FATAL ERROR: Unable to parse input tree usr/src/u-boot/tools/mkimage: Can't read /work/kernel_fdt.itb.tmp: Invalid argument # Can anyone pleas help me to get the FIT image to compile? My kernel_fdt.its looks as follows: ( taken tron the example given in u-boot-2009/doc/uImage.FIT/kernel_fdt.its ) / { #address-cells = <1>; description = "Simple image with single Linux kernel and FDT blob"; images { kernel@1 { description = "Linux kernel"; data = /incbin/("/work/build/target/linux/vmlinux.bin.gz"); type = "kernel"; arch = "ppc"; os = "linux"; compression = "gzip"; load = <00000000>; entry = <00000000>; hash@1 { algo = "crc32"; }; hash@2 { algo = "sha1"; }; }; fdt@1 { description = "Flattened Device Tree blob"; data = /incbin/("/work/build/target/boot/equus.dtb"); type = "flat_dt"; arch = "ppc"; compression = "none"; hash@1 { algo = "crc32"; }; hash@2 { algo = "sha1"; }; }; }; configurations { default = "conf@1"; conf@1 { description = "Boot Linux kernel with FDT blob"; kernel = "kernel@1"; fdt = "fdt@1"; }; }; }; Thanks Hendik

2 1

[U-Boot] Atmel AT91 USB Device Controller Driver
by Fabio Porcedda 16 Feb '09

16 Feb '09

Hi all, I would like to use an USB Console with an AT91SAM9260 microcontroller, so I've read that the usb device driver and the serial over usb driver should be enabled: #define CONFIG_USB_DEVICE #define CONFIG_USB_TTY #define CFG_CONSOLE_IS_IN_ENV the support for the Serial over USB is already present (/drivers/serial/usbtty.c), but i need the USB Device Controller Driver for the Atmel AT91 family, a sort of /drivers/usb/usbdcore_at91.c... Before starting to write (or to port from linux) the driver on my own, I ask you if someone has already done this kind of work. Thanks in advance -- Fabio Porcedda

2 3

[U-Boot] BDI 2000 strangeness on MPC8548 v2
by hendrik 16 Feb '09

16 Feb '09

Hi all this is probably a beginers question, but I am finding strange things when booting with the BDI2000 on my mpc8548 CPU v2 board. I am using the bdi config for rev2 silicon as shown below: Am i missing something? ;bdiGDB configuration file for SDH/SONET Gateway (MPC8548) ; based on configuration file for CDS8548 Rev.2 silicon ;--------------------------------------------------- ; Move the L2SRAM to the initial MMU page (MPC8548 rev2 silicon) WM32 0xFF720E44 0x0000001C ;L2ERRDIS: disable parity error WM32 0xFF720000 0x60010000 ;L2CTL WM32 0xFF720100 0xFFF80000 ;L2SRBAR0 (rev.2): map to 0x0_FFF80000 WM32 0xFF720104 0x00000000 ;L2SRBAREA0 (Rev.2) WM32 0xFF720000 0xA0010000 ;L2CTL [TARGET] CPUTYPE 8548 ;the CPU type JTAGCLOCK 0 ;use 16 MHz JTAG clock POWERUP 5000 ;start delay after power-up detected in ms WAKEUP 500 ;give reset time to complete STARTUP HALT ;LOOP, HALT, STOP or RUN BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint STEPMODE HWBP ;JTAG or HWBP, HWBP uses a hardware breakpoint REGLIST E500 ;STD, FPR or E500, E500: send E500 register set [HOST] IP 172.16.63.230 FILE $u-boot.bin FORMAT BIN LOAD MANUAL ;load code MANUAL or AUTO after reset PROMPT BDI> DUMP $e500.bin [REGS] FILE $reg8548.def Things look fine until the phys are initialized, then in stead of printing the phy name rubbish id printed. in this case in stead of "eTSEC" u-boot prints "invalid reserved". When I inspect the memory which is supposed to contain the phy device name with the BDI, on the CPU rev1 board I find the correct string in memory but on the rev2 board I find arbitrary string. Net: miiphy_register: added 'invalid reserved', read=0x1ffb2eac, write=0x1ffb2e44 debug: dev name addr = 0x1ff90124 debug: phy id = 0xFC4B invalid reserved: PHY is Vitesse VSC8211 (fc4b1) This also results in meaningless info when running mii dump: UBoot=> mii dump 0. (1140) -- er -- (fffb:1140) 0. 1- 0 = 4416 (fffb:1140) 0.129- 0 = 4416 <a[ (fffb:1140) 0. 1- 0 = 4416 �A� (fffb:1140) 0. 1- 0 = 4416 (fffb:1140) 0. 1- 0 = 4416 ��x��aH (fffb:1140) 0. 1- 0 = 4416 (fffb:1140) 0. 1- 0 = 4416 �| (fffb:1140) 0. 1- 0 = 4416 ��1。 O (fffb:1140) 0.63- 0 = 4416 ��_a(�� ? (fffb:1140) 0. 1- 0 = 4416 Is this purely related to using the BDI or is the problem related to other configuration items or simply CPU silicon related? thanks for any input Hendrik

1 0

[U-Boot] Fwd: [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548
by arun sharma 16 Feb '09

16 Feb '09

>* Index: u-boot/drivers/mtd/nand/fsl_upm.c *>* =================================================================== *>* --- u-boot.orig/drivers/mtd/nand/fsl_upm.c *>* +++ u-boot/drivers/mtd/nand/fsl_upm.c *>* @@ -90,8 +90,11 @@ static void fun_cmd_ctrl(struct mtd_info *>* mar = cmd << (32 - fun->width); *>* io_addr = fun->upm.io_addr; *>* #if CONFIG_SYS_NAND_MAX_CHIPS > 1 *>* - if (fun->chip_nr > 0) *>* + if (fun->chip_nr > 0) { *>* io_addr += fun->chip_offset * fun->chip_nr; *>* + if (fun->upm_mar_chip_offset) *>* + mar |= fun->upm_mar_chip_offset * fun->chip_nr; *>* + } * above patch is not suitable for 832x becuase mar register has only 26 bit (6 bit are resrved) what should be done On Sat, Feb 14, 2009 at 2:28 AM, Scott Wood <scottwood(a)freescale.com> wrote: > On Wed, Feb 11, 2009 at 06:38:19PM +0100, Wolfgang Grandegger wrote: > > The following patch series intends to support the Micron multi-chip > > NAND device MT29F8G08FAB on the TQM8548 modules from TQ-Components. > > To offer this multi-chip device as one single device to the user, > > multi-chip device has been added to the MTD NAND layer and the > > FSL-UPM-NAND driver. > > > > The TQM8548 support is based on the following patch series sent > > a few minutes ago: > > > > [PATCH 0/8] MPC85xx: Support for TQM8548-AG and TQM8548-BE > > > > Wolfgang. > > Applied 1-5 to u-boot-nand-flash/next, thanks! > > -Scott > _______________________________________________ > U-Boot mailing list > U-Boot(a)lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >

2 1

[U-Boot] zmodem support
by 钟武文 16 Feb '09

16 Feb '09

Hi, I want to load file by serial,but the kermit file transfer protocol is slow.Can I use the zmodem protocol? Best Regards

2 1