December 2009 - U-Boot

[U-Boot] [PATCH] ppc/p4080: Fix reporting of PME & FM clock frequencies
by Kumar Gala 10 Dec '09

10 Dec '09

We incorrectly had the sense of PME_CLK_SEL, FM1_CLK_SEL, FM2_CLK_SEL backwards so we report the wrong frequency. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- cpu/mpc85xx/speed.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 7959082..2103e2e 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -103,21 +103,21 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME if (rcw_tmp & PME_CLK_SEL) - sysInfo->freqPME = freqCC_PLL[2] / 2; - else sysInfo->freqPME = sysInfo->freqSystemBus / 2; + else + sysInfo->freqPME = freqCC_PLL[2] / 2; #endif #ifdef CONFIG_SYS_DPAA_FMAN if (rcw_tmp & FM1_CLK_SEL) - sysInfo->freqFMan[0] = freqCC_PLL[2] / 2; - else sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + else + sysInfo->freqFMan[0] = freqCC_PLL[2] / 2; #if (CONFIG_SYS_NUM_FMAN) == 2 if (rcw_tmp & FM2_CLK_SEL) - sysInfo->freqFMan[1] = freqCC_PLL[2] / 2; - else sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + else + sysInfo->freqFMan[1] = freqCC_PLL[2] / 2; #endif #endif -- 1.6.0.6

1 1

[U-Boot] [PATCH] da830evm: Use table driven pin mux configuration
by Nick Thompson 10 Dec '09

10 Dec '09

da830evm: Use table driven pin mux configuration Tidyup the pin muxer configuration using the Davinci table driven pinmux configuration function and data tables. Signed-off-by: Nick Thompson <nick.thompson(a)ge.com> --- Applies to: u-boot-ti This patch depends on "Davinci: Table driven pinmux configuration" posted on Nov 16, 2009. board/davinci/da830evm/da830evm.c | 27 +++++++++++++-------------- 1 files changed, 13 insertions(+), 14 deletions(-) diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c index bb8cc3c..80fd627 100644 --- a/board/davinci/da830evm/da830evm.c +++ b/board/davinci/da830evm/da830evm.c @@ -42,29 +42,35 @@ DECLARE_GLOBAL_DATA_PTR; #define pinmux &davinci_syscfg_regs->pinmux -#ifdef CONFIG_SPI_FLASH /* SPI0 pin muxer settings */ -const struct pinmux_config spi0_pins[] = { +static const struct pinmux_config spi0_pins[] = { { pinmux[7], 1, 3 }, { pinmux[7], 1, 4 }, { pinmux[7], 1, 5 }, { pinmux[7], 1, 6 }, { pinmux[7], 1, 7 } }; -#endif /* UART pin muxer settings */ -const struct pinmux_config uart_pins[] = { +static const struct pinmux_config uart_pins[] = { { pinmux[8], 2, 7 }, { pinmux[9], 2, 0 } }; /* I2C pin muxer settings */ -const struct pinmux_config i2c_pins[] = { +static const struct pinmux_config i2c_pins[] = { { pinmux[9], 2, 3 }, { pinmux[9], 2, 4 } }; +static const struct pinmux_resource pinmuxes[] = { +#ifdef CONFIG_SPI_FLASH + PINMUX_ITEM(spi0_pins), +#endif + PINMUX_ITEM(uart_pins), + PINMUX_ITEM(i2c_pins), +}; + int board_init(void) { #ifndef CONFIG_USE_IRQ @@ -107,15 +113,8 @@ int board_init(void) DAVINCI_SYSCFG_SUSPSRC_UART2), &davinci_syscfg_regs->suspsrc); -#ifdef CONFIG_SPI_FLASH - if (davinci_configure_pin_mux(spi0_pins, ARRAY_SIZE(spi0_pins)) != 0) - return 1; -#endif - - if (davinci_configure_pin_mux(uart_pins, ARRAY_SIZE(uart_pins)) != 0) - return 1; - - if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0) + /* configure pinmux settings */ + if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) return 1; /* enable the console UART */ -- 1.6.3.3

1 0

[U-Boot] [GIT PULL] Please pull u-boot-mpc83xx.git master (boottime performance regression)
by Kim Phillips 09 Dec '09

09 Dec '09

Wolfgang Denk, Please pull a fix that almost halves u-boot's boot time on most 83xx boards: The following changes since commit 386118a896554b13f14ad0f82356276988f7de82: Michal Simek (1): microblaze: Correct ffs regression for Microblaze are available in the git repository at: git://git.denx.de/u-boot-mpc83xx.git master Peter Korsgaard (1): mpc83xx: boot time regression, move LCRR setup back to cpu_init_f cpu/mpc83xx/cpu_init.c | 61 ++++++++++++++++++++++------------------------- 1 files changed, 29 insertions(+), 32 deletions(-) Thanks, Kim

2 1

[U-Boot] [PATCH] mpc83xx: boot time regression, move LCRR setup back to cpu_init_f
by Peter Korsgaard 09 Dec '09

09 Dec '09

Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields) moved the LCRR assignment to after relocation to RAM because of the potential problem with changing the local bus clock while executing from flash. This change unfortunately adversely affects the boot time, as running all code up to cpu_init_r can cause significant slowdown. E.G. on a 8347 board a bootup time increase of ~600ms has been observed: 0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz 0.168 RS: 232 0.172 I2C: ready 0.176 DRAM: 64 MB 1.236 FLASH: 32 MB Versus: 0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz 0.092 RS: 232 0.092 I2C: ready 0.096 DRAM: 64 MB 0.644 FLASH: 32 MB So far no boards have needed the late LCRR setup, so simply revert it for now - If it is needed at a later time, those boards can either do their own final LCRR setup in board code (E.G. in board_early_init_r), or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do the setup in cpu_init_r. Signed-off-by: Peter Korsgaard <jacmet(a)sunsite.dk> --- cpu/mpc83xx/cpu_init.c | 61 ++++++++++++++++++++++------------------------- 1 files changed, 29 insertions(+), 32 deletions(-) diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 031e8d5..0d6a5fe 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -171,6 +171,28 @@ void cpu_init_f (volatile immap_t * im) (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | #endif 0; + __be32 lcrr_mask = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ + LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + LCRR_CLKDIV | +#endif + 0; + __be32 lcrr_val = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + CONFIG_SYS_LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC + CONFIG_SYS_LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + CONFIG_SYS_LCRR_CLKDIV | +#endif + 0; /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -199,6 +221,13 @@ void cpu_init_f (volatile immap_t * im) */ __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr); + /* LCRR - Clock Ratio Register (10.3.1.16) + * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description + */ + clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->lbus.lcrr); + isync(); + /* Enable Time Base & Decrementer ( so we will have udelay() )*/ setbits_be32(&im->sysconf.spcr, SPCR_TBEN); @@ -331,41 +360,9 @@ void cpu_init_f (volatile immap_t * im) int cpu_init_r (void) { - volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; #ifdef CONFIG_QE uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */ -#endif - __be32 lcrr_mask = -#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ - LCRR_DBYP | -#endif -#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ - LCRR_EADC | -#endif -#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ - LCRR_CLKDIV | -#endif - 0; - __be32 lcrr_val = -#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ - CONFIG_SYS_LCRR_DBYP | -#endif -#ifdef CONFIG_SYS_LCRR_EADC - CONFIG_SYS_LCRR_EADC | -#endif -#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ - CONFIG_SYS_LCRR_CLKDIV | -#endif - 0; - /* LCRR - Clock Ratio Register (10.3.1.16) - * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description - */ - clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); - __raw_readl(&im->lbus.lcrr); - isync(); - -#ifdef CONFIG_QE qe_init(qe_base); qe_reset(); #endif -- 1.6.5

2 1

[U-Boot] [PATCH RFC] add include/asm-m68k/unaligned.h
by Wolfgang Wegner 09 Dec '09

09 Dec '09

lib_generic/zlib.c needs include/asm/unaligned.h since commit cd514aeb996e2f7aefbe1f78481965d9d074aed4, which broke compilation for Coldfire/M68K. This patch adds the missing header for these architectures. Signed-off-by: Wolfgang Wegner <w.wegner(a)astro-kom.de> --- I tried to get an idea on how this works from the two existing unaligned.h and the linux kernel headers. Any comments and corrections welcome. include/asm-m68k/unaligned.h | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) create mode 100644 include/asm-m68k/unaligned.h diff --git a/include/asm-m68k/unaligned.h b/include/asm-m68k/unaligned.h new file mode 100644 index 0000000..328aa0c --- /dev/null +++ b/include/asm-m68k/unaligned.h @@ -0,0 +1,15 @@ +#ifndef _ASM_M68K_UNALIGNED_H +#define _ASM_M68K_UNALIGNED_H + +#ifdef CONFIG_COLDFIRE +#include <linux/unaligned/be_byteshift.h> +#else +#include <linux/unaligned/access_ok.h> +#endif + +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_M68K_UNALIGNED_H */ -- 1.5.6.5

1 0

[U-Boot] (no subject)
by 星杨 09 Dec '09

09 Dec '09

1 0

[U-Boot] early delay from C (before stack setup)
by Matthias Kaehlcke 08 Dec '09

08 Dec '09

hi, i'm writing low-level setup code in C that is executed before the stack is initialized. this code needs to delay execution at several points. it seems to me that the use of udelay() is out of question cause there is no stack to pass the parameter, besides the timer subsystem udelay() depends on is not set up at this point. could someone please enlighten me and tell me what is the U-Boot way to perform this kind of delay? -- Matthias Kaehlcke Embedded Linux Developer Barcelona Nationalism is an infantile disease. It is the measles of mankind (Albert Einstein) .''`. using free software / Debian GNU/Linux | http://debian.org : :' : `. `'` gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-

1 0

[U-Boot] [PATCH] Remove superfluous uses of V_PROMPT macro.
by Robert P. J. Day 08 Dec '09

08 Dec '09

A number of config files define the V_PROMPT macro for the command-line prompt, only to immediately use that macro to define CONFIG_SYS_PROMPT, making V_PROMPT entirely superfluous. Signed-off-by: Robert P. J. Day <rpjday(a)crashcourse.ca> --- i think this takes care of all of them. include/configs/apollon.h | 4 +--- include/configs/omap2420h4.h | 8 +++----- include/configs/omap3_beagle.h | 4 +--- include/configs/omap3_evm.h | 4 +--- include/configs/omap3_overo.h | 4 +--- include/configs/omap3_pandora.h | 4 +--- include/configs/omap3_sdp3430.h | 3 +-- include/configs/omap3_zoom1.h | 4 +--- 8 files changed, 10 insertions(+), 25 deletions(-) diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 575f60e..891b3ab 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -183,10 +183,8 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "Apollon # " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "Apollon # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 9c18842..9c6b6e5 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -163,14 +163,12 @@ /* * Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #ifdef CONFIG_APTIX -#define V_PROMPT "OMAP2420 Aptix # " +# define CONFIG_SYS_PROMPT "OMAP2420 Aptix # " #else -#define V_PROMPT "OMAP242x H4 # " +# define CONFIG_SYS_PROMPT "OMAP242x H4 # " #endif - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT V_PROMPT #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 19a5ec9..7fad93b 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -213,12 +213,10 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "OMAP3 beagleboard.org # " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index a5514ae..c181852 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -194,12 +194,10 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "OMAP3_EVM # " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "OMAP3_EVM # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index ffb515d..745d418 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -199,12 +199,10 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "Overo # " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "Overo # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 6f21af3..d2786c0 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -191,12 +191,10 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "Pandora # " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "Pandora # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 229dc5e..35298c2 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -263,12 +263,11 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "OMAP34XX SDP # " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "OMAP34XX SDP # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index da4b677..02a486e 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -199,12 +199,10 @@ /* * Miscellaneous configurable options */ -#define V_PROMPT "OMAP3 Zoom1# " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ rday -- ======================================================================== Robert P. J. Day Waterloo, Ontario, CANADA Linux Consulting, Training and Kernel Pedantry. Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday ========================================================================

2 1

[U-Boot] copy to flash: Flash not Erased
by Howard Wang 08 Dec '09

08 Dec '09

Hi, I have some problems with using u-boot writing to flash: ( arm 920 processor ) first I use tftp to download the kernel to memory and was successful: >tftp 0x800000 mImage > OK then I try to erase part of the flash, seems ok: > erase 0x1c040000 0x1c8FFFFF > erased 124 sectors then I use cp.b command, failed with the "Flash not Erased" message cp.b ${fileaddr} 0x1c040000 ${filesize} > copy to Flash...-Flash not Erased. and no detailed error message was given. any idea what could be wrong ? Thanks for the help in advance. Howard

2 1

[U-Boot] [PATCH][RFC][for next] common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
by Heiko Schocher 08 Dec '09

08 Dec '09

There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- based against git://git.denx.de/u-boot.git next README | 9 +-------- common/cmd_fdt.c | 14 ++------------ common/cmd_ide.c | 4 ++-- common/cmd_onenand.c | 4 ---- common/image.c | 4 ---- cpu/mpc85xx/mp.c | 4 ---- disk/part.c | 2 +- drivers/mtd/nand/nand_util.c | 4 ---- fs/ubifs/ubifs.c | 4 ---- include/common.h | 2 -- include/configs/ASH405.h | 2 -- include/configs/CMS700.h | 2 -- include/configs/HH405.h | 2 -- include/configs/HUB405.h | 2 -- include/configs/IDS8247.h | 2 -- include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 3 --- include/configs/MPC837XERDB.h | 3 --- include/configs/MPC8536DS.h | 4 ---- include/configs/MPC8540ADS.h | 3 --- include/configs/MPC8541CDS.h | 3 --- include/configs/MPC8544DS.h | 3 --- include/configs/MPC8548CDS.h | 3 --- include/configs/MPC8555CDS.h | 3 --- include/configs/MPC8560ADS.h | 3 --- include/configs/MPC8568MDS.h | 3 --- include/configs/MPC8569MDS.h | 3 --- include/configs/MPC8572DS.h | 3 --- include/configs/MPC8610HPCD.h | 3 --- include/configs/MPC8641HPCN.h | 4 ---- include/configs/P1_P2_RDB.h | 3 --- include/configs/P2020DS.h | 3 --- include/configs/PLU405.h | 2 -- include/configs/PPChameleonEVB.h | 2 -- include/configs/SIMPC8313.h | 1 - include/configs/TQM8272.h | 2 -- include/configs/TQM85xx.h | 2 -- include/configs/VOH405.h | 2 -- include/configs/WUH405.h | 2 -- include/configs/XPEDITE5170.h | 3 --- include/configs/XPEDITE5200.h | 3 --- include/configs/XPEDITE5370.h | 3 --- include/configs/acadia.h | 2 -- include/configs/afeb9260.h | 1 - include/configs/apollon.h | 2 -- include/configs/aria.h | 2 -- include/configs/at91cap9adk.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 2 -- include/configs/at91sam9rlek.h | 1 - include/configs/bfin_adi_common.h | 3 --- include/configs/cpu9260.h | 1 - include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/delta.h | 2 -- include/configs/devkit8000.h | 2 -- include/configs/keymile-common.h | 2 -- include/configs/kilauea.h | 2 -- include/configs/mecp5123.h | 2 -- include/configs/meesc.h | 1 - include/configs/mpc5121ads.h | 2 -- include/configs/netstar.h | 2 -- include/configs/nhk8815.h | 1 - include/configs/omap3_beagle.h | 2 -- include/configs/omap3_evm.h | 2 -- include/configs/omap3_overo.h | 2 -- include/configs/omap3_pandora.h | 3 --- include/configs/omap3_zoom1.h | 3 --- include/configs/omap3_zoom2.h | 2 -- include/configs/openrd_base.h | 1 - include/configs/pdnb3.h | 1 - include/configs/pm9261.h | 3 --- include/configs/pm9263.h | 1 - include/configs/quad100hd.h | 1 - include/configs/rd6281a.h | 1 - include/configs/sbc35_a9g20.h | 1 - include/configs/sbc8641d.h | 3 --- include/configs/sc3.h | 2 -- include/configs/sheevaplug.h | 1 - include/configs/smdk6400.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/socrates.h | 2 -- include/configs/tny_a9260.h | 1 - include/configs/vct.h | 6 ------ include/configs/zylonite.h | 2 -- include/ppc4xx.h | 6 ------ lib_generic/vsprintf.c | 18 +----------------- 97 files changed, 7 insertions(+), 239 deletions(-) diff --git a/README b/README index 2c77687..e462d75 100644 --- a/README +++ b/README @@ -773,7 +773,7 @@ The following options need to be configured: CONFIG_LBA48 Set this to enable support for disks larger than 137GB - Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL + Also look at CONFIG_SYS_64BIT_LBA. Whithout these , LBA48 support uses 32bit variables and will 'only' support disks up to 2.1TB. @@ -2520,13 +2520,6 @@ use the "saveenv" command to store a valid environment. - CONFIG_SYS_FAULT_MII_ADDR: MII address of the PHY to check for the Ethernet link state. -- CONFIG_SYS_64BIT_VSPRINTF: - Makes vsprintf (and all *printf functions) support printing - of 64bit values by using the L quantifier - -- CONFIG_SYS_64BIT_STRTOUL: - Adds simple_strtoull that returns a 64bit value - - CONFIG_NS16550_MIN_FUNCTIONS: Define this if you desire to only have use of the NS16550_init and NS16550_putc functions for the serial driver located at diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 919a0bf..5df79ae 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -364,13 +364,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } else if (strncmp(argv[1], "me", 2) == 0) { uint64_t addr, size; int err; -#ifdef CONFIG_SYS_64BIT_STRTOUL - addr = simple_strtoull(argv[2], NULL, 16); - size = simple_strtoull(argv[3], NULL, 16); -#else - addr = simple_strtoul(argv[2], NULL, 16); - size = simple_strtoul(argv[3], NULL, 16); -#endif + addr = simple_strtoull(argv[2], NULL, 16); + size = simple_strtoull(argv[3], NULL, 16); err = fdt_fixup_memory(working_fdt, addr, size); if (err < 0) return err; @@ -402,13 +397,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } else if (argv[2][0] == 'a') { uint64_t addr, size; int err; -#ifdef CONFIG_SYS_64BIT_STRTOUL addr = simple_strtoull(argv[3], NULL, 16); size = simple_strtoull(argv[4], NULL, 16); -#else - addr = simple_strtoul(argv[3], NULL, 16); - size = simple_strtoul(argv[4], NULL, 16); -#endif err = fdt_add_mem_rsv(working_fdt, addr, size); if (err < 0) { diff --git a/common/cmd_ide.c b/common/cmd_ide.c index ec9a1df..093ca9f 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -1354,7 +1354,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) } if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF) +#if defined(CONFIG_SYS_64BIT_LBA) printf ("Error (no IRQ) dev %d blk %Ld: status 0x%02x\n", device, blknr, c); #else @@ -1444,7 +1444,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer) c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */ if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF) +#if defined(CONFIG_SYS_64BIT_LBA) printf ("Error (no IRQ) dev %d blk %Ld: status 0x%02x\n", device, blknr, c); #else diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 9090940..565257c 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -19,10 +19,6 @@ #include <asm/io.h> -#if !defined(CONFIG_SYS_64BIT_VSPRINTF) -#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! -#endif - static struct mtd_info *mtd; static loff_t next_ofs; diff --git a/common/image.c b/common/image.c index 6eaf41e..edd1ea7 100644 --- a/common/image.c +++ b/common/image.c @@ -435,11 +435,7 @@ phys_size_t getenv_bootm_size(void) char *s = getenv ("bootm_size"); if (s) { phys_size_t tmp; -#ifdef CONFIG_SYS_64BIT_STRTOUL tmp = (phys_size_t)simple_strtoull (s, NULL, 16); -#else - tmp = (phys_size_t)simple_strtoul (s, NULL, 16); -#endif return tmp; } diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c index 00b6450..7626eb8 100644 --- a/cpu/mpc85xx/mp.c +++ b/cpu/mpc85xx/mp.c @@ -90,11 +90,7 @@ int cpu_release(int nr, int argc, char *argv[]) return 1; } -#ifdef CONFIG_SYS_64BIT_STRTOUL boot_addr = simple_strtoull(argv[0], NULL, 16); -#else - boot_addr = simple_strtoul(argv[0], NULL, 16); -#endif /* handle pir, r3, r6 */ for (i = 1; i < 4; i++) { diff --git a/disk/part.c b/disk/part.c index 9ced452..b6bae17 100644 --- a/disk/part.c +++ b/disk/part.c @@ -196,7 +196,7 @@ void dev_print (block_dev_desc_t *dev_desc) if (dev_desc->lba48) printf (" Supports 48-bit addressing\n"); #endif -#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF) +#if defined(CONFIG_SYS_64BIT_LBA) printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n", mb_quot, mb_rem, gb_quot, gb_rem, diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index bec9277..78539ea 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -41,10 +41,6 @@ #include <nand.h> #include <jffs2/jffs2.h> -#if !defined(CONFIG_SYS_64BIT_VSPRINTF) -#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! -#endif - typedef struct erase_info erase_info_t; typedef struct mtd_info mtd_info_t; diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index 82f1c54..3fc7990 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -26,10 +26,6 @@ #include "ubifs.h" #include <u-boot/zlib.h> -#if !defined(CONFIG_SYS_64BIT_VSPRINTF) -#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! -#endif - DECLARE_GLOBAL_DATA_PTR; /* compress.c */ diff --git a/include/common.h b/include/common.h index 30a4b7a..2f8601c 100644 --- a/include/common.h +++ b/include/common.h @@ -614,9 +614,7 @@ int init_timebase (void); /* lib_generic/vsprintf.c */ ulong simple_strtoul(const char *cp,char **endp,unsigned int base); -#ifdef CONFIG_SYS_64BIT_VSPRINTF unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base); -#endif long simple_strtol(const char *cp,char **endp,unsigned int base); void panic(const char *fmt, ...) __attribute__ ((format (__printf__, 1, 2))); diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 694a87b..5cb0f1e 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -160,8 +160,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 2384925..ae8494d 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -165,8 +165,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 1a2266f..9233523 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -219,8 +219,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 518d94d..ea502d4 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -160,8 +160,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 147a8b2..71bb7b4 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -263,8 +263,6 @@ #define CONFIG_SYS_NAND0_BASE 0xE1000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #endif /* CONFIG_CMD_NAND */ /*----------------------------------------------------------------------- diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 5927e76..0a4ba29 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -236,7 +236,6 @@ #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 8eaff5d..79376b3 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -228,7 +228,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 6cee78a..1d1f94f 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -213,7 +213,6 @@ #define CONFIG_NAND_FSL_UPM 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index abeb6a2..63f1d85 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -321,9 +321,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 7ef92f7..913184c 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -343,9 +343,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index a847275..8f5e55c 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -440,10 +440,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - - /* * I2C */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 4af599b..78bb74b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -260,9 +260,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index a8f206f..e24dec6 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -293,9 +293,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 0caf456..f761dc4 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -249,9 +249,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index e69ba90..7bb65ca 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -316,9 +316,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 94952dc..41e0938 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -291,9 +291,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index df59aca..4a4a9ed 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -253,9 +253,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 7b8c6c7..b105687 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -277,9 +277,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 17ea3bb..3ff0c28 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -254,9 +254,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 000f8f6..1f4b957 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -374,9 +374,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* new uImage format support */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 7cb4ccd..1d2d659 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -251,9 +251,6 @@ /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index a46f7c8..12a8f60 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -301,10 +301,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index e2930c1..ddfe7aa 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -310,9 +310,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* new uImage format support */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index b48c199..6e6cc8a 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -408,9 +408,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* new uImage format support */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 85e4611..633a8b2 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -181,8 +181,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * PCI stuff */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 6fba0ca..8e9d928 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -211,8 +211,6 @@ *----------------------------------------------------------------------- */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * nand device 1 on dave (PPChameleonEVB) needs more time, * so we just introduce additional wait in nand_wait(), diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index f68d834..36e952e 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -132,7 +132,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 6eaa61d..12a7eda 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -442,8 +442,6 @@ WRITE_NAND(d, addr); \ } while(0) -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #endif /* CONFIG_CMD_NAND */ #define CONFIG_PCI diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 1fbf4bf..d44fb07 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -372,8 +372,6 @@ #define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #endif /* CONFIG_NAND */ /* diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 17397e8..38a1d0d 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -169,8 +169,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index dbfa1aa..5c281a1 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -157,8 +157,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 1a810e4..c63fd42 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -239,9 +239,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 3f73780..1a56c60 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -213,9 +213,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 7782df3..7fd3668 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -244,9 +244,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 2fb48b6..bd3388f 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -266,8 +266,6 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 74677d8..58b8c8c 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -107,7 +107,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index ddac5fb..adab454 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -258,8 +258,6 @@ #define CONFIG_ENV_ADDR 0x00020000 #define CONFIG_ENV_ADDR_FLEX 0x00040000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #ifdef CONFIG_SYS_USE_UBI #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "onenand0=onenand" diff --git a/include/configs/aria.h b/include/configs/aria.h index 2938eac..f89fc57 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -251,8 +251,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index cc194d8..322718f 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -131,7 +131,6 @@ #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 3507de2..0509011 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index f86698f..fbf7389 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index a1582fc..571351c 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -267,7 +267,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index b460188..06184e7 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -118,7 +118,6 @@ /* NOR flash, if populated */ #ifndef CONFIG_CMD_NAND #define CONFIG_SYS_NO_FLASH 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #else #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 @@ -142,7 +141,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index b83266d..6fad75d 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -119,7 +119,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet - not present */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 0b87418..0fbd8f4 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -87,9 +87,6 @@ # define CONFIG_CMD_SPIBOOTLDR # endif #endif -#ifdef CONFIG_CMD_NAND -# define CONFIG_SYS_64BIT_VSPRINTF -#endif /* * Console Settings diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index de8cfb7..4ef8566 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -295,7 +295,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index ea40df0..d092fb8 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 5db720e..ca3dea4 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -114,7 +114,6 @@ #define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x3C0000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #undef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OVERWRITE #endif diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 53a105b..4916077 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -77,7 +77,6 @@ #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6617941..ce2d7c4 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -77,7 +77,6 @@ #define CONFIG_NAND_DAVINCI #undef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } #define CONFIG_SYS_NAND_HW_ECC diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index b045e80..f7d2399 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -138,7 +138,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define DEF_BOOTM "" #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 9384cdd..47db2aa 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -92,7 +92,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /*=====================*/ /* Board related stuff */ /*=====================*/ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 71d48fb..f24eb7a 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* I2C switch definitions for PCA9543 chip */ #define CONFIG_SYS_I2C_PCA9543_ADDR 0x70 #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 9138b2b..5a55c56 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -125,7 +125,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define DEF_BOOTM "" #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT diff --git a/include/configs/delta.h b/include/configs/delta.h index 95e04f9..9c46c5b 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -226,8 +226,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* nand timeout values */ #define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 #define CONFIG_SYS_NAND_OTHER_TO 100 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 1011770..e81da67 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -132,8 +132,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 80c41a4..2ef6a35 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for UBI/UBIFS */ - /* UBI Support for all Keymile boards */ #define CONFIG_CMD_UBI #define CONFIG_RBTREE diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 965599c..8d4ce8d 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -217,8 +217,6 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index e194c8f..cccc31d 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -177,8 +177,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index b996854..ab5cbca 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -121,7 +121,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index ebc518c..fb49388 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -239,8 +239,6 @@ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE #define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 7bddf24..20b423b 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -111,8 +111,6 @@ #define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index a00c2fb..2b640dc 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -91,7 +91,6 @@ #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ -#define CONFIG_SYS_64BIT_VSPRINTF /* mtd desires this */ #define BOARD_LATE_INIT /* call board_late_init during start up */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 024b9b8..a6fe5e1 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -151,8 +151,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 6709edc..00093f8 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -146,8 +146,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 0f812a7..0c12b9f 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -137,8 +137,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 0cafeb8..154c0f4 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -140,9 +140,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ - -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 2aef973..ef7a28b 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -147,9 +147,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ - -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 5b03fb6..2b07666 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -167,8 +167,6 @@ #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* Environment information */ #define CONFIG_BOOTDELAY 10 diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h index 2aba0cb..88f27ba 100644 --- a/include/configs/openrd_base.h +++ b/include/configs/openrd_base.h @@ -114,7 +114,6 @@ #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 2612165..220f686 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -266,7 +266,6 @@ */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 9bf49ba..399d15f 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -236,9 +236,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - - /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 6761c18..0af1280 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -259,7 +259,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_CMD_JFFS2 1 diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index d63c43e..b08dcd4 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -226,7 +226,6 @@ #define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h index 3f4d42c..3d8e25c 100644 --- a/include/configs/rd6281a.h +++ b/include/configs/rd6281a.h @@ -107,7 +107,6 @@ #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 7a2dcd8..f4b3477 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -161,7 +161,6 @@ #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 682d241..315eebe 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -285,9 +285,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index d4697ad..a5eca39 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -422,8 +422,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x77D00000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ /* No command line, one static partition */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 1f95a3c..fc401a8 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -107,7 +107,6 @@ #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f644cd2..f04feae 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -268,8 +268,6 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* Boot configuration (define only one of next 3) */ #define CONFIG_BOOT_NAND /* None of these are currently implemented. Left from the original Samsung diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 8c472af..bf0ee67 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -213,8 +213,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ #define CONFIG_IDENT_STRING " for SMDKC100" -#define CONFIG_SYS_64BIT_VSPRINTF - #if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000) #define CONFIG_ENABLE_MMU #endif diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 3632b84..9641041 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -188,8 +188,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_CMD_NAND -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* LIME GDC */ #define CONFIG_SYS_LIME_BASE 0xc8000000 #define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */ diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 5b70a7b..4ad081b 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -138,7 +138,6 @@ #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" diff --git a/include/configs/vct.h b/include/configs/vct.h index 20bf481..1b894a6 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -284,12 +284,6 @@ int vct_gpio_get(int pin); #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ /* - * Needed for 64bit printf format - */ -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - -/* * UBI configuration */ #if defined(CONFIG_VCT_ONENAND) diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 36c341e..d0fc138 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -205,8 +205,6 @@ #define CONFIG_SYS_NAND_SENDCMD_RETRY 3 #undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* NAND Timing Parameters (in ns) */ #define NAND_TIMING_tCH 10 #define NAND_TIMING_tCS 0 diff --git a/include/ppc4xx.h b/include/ppc4xx.h index 5024db4..ee30a4c 100644 --- a/include/ppc4xx.h +++ b/include/ppc4xx.h @@ -100,12 +100,6 @@ #endif /* 440EP/EPX 440GR/GRX 440SP/SPE 460EX/GT/SX 405EX*/ #if defined(CONFIG_440) -/* - * Enable long long (%ll ...) printf format on 440 PPC's since most of - * them support 36bit physical addressing - */ -#define CONFIG_SYS_64BIT_VSPRINTF -#define CONFIG_SYS_64BIT_STRTOUL #include <ppc440.h> #else #include <ppc405.h> diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c index 3d95728..8c58a93 100644 --- a/lib_generic/vsprintf.c +++ b/lib_generic/vsprintf.c @@ -21,21 +21,10 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); #endif -#ifdef CONFIG_SYS_64BIT_VSPRINTF #include <div64.h> # define NUM_TYPE long long -#else -# define NUM_TYPE long -#define do_div(n, base) ({ \ - unsigned int __res; \ - __res = ((unsigned NUM_TYPE) n) % base; \ - n = ((unsigned NUM_TYPE) n) / base; \ - __res; \ -}) -#endif #define noinline __attribute__((noinline)) - const char hex_asc[] = "0123456789abcdef"; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] @@ -104,7 +93,6 @@ int ustrtoul(const char *cp, char **endp, unsigned int base) return result; } -#ifdef CONFIG_SYS_64BIT_STRTOUL unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base) { unsigned long long result = 0, value; @@ -132,7 +120,6 @@ unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int ba *endp = (char *) cp; return result; } -#endif /* CONFIG_SYS_64BIT_STRTOUL */ /* we use this so that we can do without the ctype library */ #define is_digit(c) ((c) >= '0' && (c) <= '9') @@ -631,12 +618,9 @@ int vsprintf(char *buf, const char *fmt, va_list args) --fmt; continue; } -#ifdef CONFIG_SYS_64BIT_VSPRINTF if (qualifier == 'L') /* "quad" for 64 bit variables */ num = va_arg(args, unsigned long long); - else -#endif - if (qualifier == 'l') { + else if (qualifier == 'l') { num = va_arg(args, unsigned long); if (flags & SIGN) num = (signed long) num; -- 1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

3 4