July 2008 - U-Boot

[U-Boot-Users] [PATCH] ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
by Hugo Villeneuve 13 Jul '08

13 Jul '08

ARM: Fix for broken compilation when defining CONFIG_CMD_ELF caused by missing dcache status/enable/disable functions. Signed-off-by: Hugo Villeneuve <hugo.villeneuve(a)lyrtech.com> --- cpu/arm926ejs/cpu.c | 51 +++++++++++++++++++++++++++++--------- include/configs/davinci_sffsdr.h | 1 + 2 files changed, 40 insertions(+), 12 deletions(-) diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c index 722732e..56c6289 100644 --- a/cpu/arm926ejs/cpu.c +++ b/cpu/arm926ejs/cpu.c @@ -134,25 +134,52 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } -void icache_enable (void) +/* cache_bit must be either C1_IC or C1_DC */ +static void cache_enable(uint32_t cache_bit) { - ulong reg; + uint32_t reg; - reg = read_p15_c1 (); /* get control reg. */ - cp_delay (); - write_p15_c1 (reg | C1_IC); + reg = read_p15_c1(); /* get control reg. */ + cp_delay(); + write_p15_c1(reg | cache_bit); } -void icache_disable (void) +/* cache_bit must be either C1_IC or C1_DC */ +static void cache_disable(uint32_t cache_bit) { - ulong reg; + uint32_t reg; - reg = read_p15_c1 (); - cp_delay (); - write_p15_c1 (reg & ~C1_IC); + reg = read_p15_c1(); + cp_delay(); + write_p15_c1(reg & ~cache_bit); } -int icache_status (void) +void icache_enable(void) { - return (read_p15_c1 () & C1_IC) != 0; + cache_enable(C1_IC); +} + +void icache_disable(void) +{ + cache_disable(C1_IC); +} + +int icache_status(void) +{ + return (read_p15_c1() & C1_IC) != 0; +} + +void dcache_enable(void) +{ + cache_enable(C1_DC); +} + +void dcache_disable(void) +{ + cache_disable(C1_DC); +} + +int dcache_status(void) +{ + return (read_p15_c1() & C1_DC) != 0; } diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 0e49e6c..7c860e5 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -137,6 +137,7 @@ #define CONFIG_CMD_SAVES #define CONFIG_CMD_NAND #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */ #undef CONFIG_CMD_BDI #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR

2 1

[U-Boot-Users] [PATCH] ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
by Stefan Roese 13 Jul '08

13 Jul '08

This patch removes some ft_board_setup() functions from some 4xx boards. This can be done since we now have a default weak implementation for this in cpu/ppc4xx/fdt.c. Only board in need for a different/custom implementation like canyonlands need their own version. Signed-off-by: Stefan Roese <sr(a)denx.de> --- board/amcc/katmai/katmai.c | 21 --------------------- board/amcc/kilauea/kilauea.c | 21 --------------------- board/amcc/makalu/makalu.c | 21 --------------------- board/amcc/sequoia/sequoia.c | 21 --------------------- board/amcc/yosemite/yosemite.c | 21 --------------------- board/esd/pmc440/pmc440.c | 21 --------------------- board/prodrive/alpr/alpr.c | 21 --------------------- cpu/ppc4xx/fdt.c | 12 ++++++++++-- 8 files changed, 10 insertions(+), 149 deletions(-) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 3a0b18f..f2bed5c 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -517,24 +517,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index f30dc8f..7b10255 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -374,24 +374,3 @@ int post_hotkeys_pressed(void) return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 9baec9a..2b4d3d4 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -330,24 +330,3 @@ int post_hotkeys_pressed(void) return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 5ff9787..b833092 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -509,24 +509,3 @@ int post_hotkeys_pressed(void) return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 3b1f8e2..05be40a 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -510,24 +510,3 @@ void board_reset(void) /* give reset to BCSR */ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; } - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 5b811bb..0cdaee4 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -876,24 +876,3 @@ int usb_board_init_fail(void) return 0; } #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 8d60936..131a62d 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -287,24 +287,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c index ccc73d5..0323dc5 100644 --- a/cpu/ppc4xx/fdt.c +++ b/cpu/ppc4xx/fdt.c @@ -47,8 +47,16 @@ void __ft_board_setup(void *blob, bd_t *bd) val[1] = 0; /* always 0 */ val[2] = gd->bd->bi_flashstart; val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); + if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) { + rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", + val, sizeof(val), 1); + } else { + /* + * Some 405 PPC's have EBC as direct PLB child in the dts + */ + rc = fdt_find_and_setprop(blob, "/plb/ebc", "ranges", + val, sizeof(val), 1); + } if (rc) printf("Unable to update property NOR mapping, err=%s\n", fdt_strerror(rc)); -- 1.5.6.2

2 1

[U-Boot-Users] [PATCH] MMC: Consolidate MMC/SD command definitions
by Haavard Skinnemoen 13 Jul '08

13 Jul '08

This moves the MMC and SD Card command definitions from include/asm/arch/mmc.h into include/mmc.h. These definitions are given by the MMC and SD Card standards, not by any particular architecture. There's a lot more room for consolidation in the MMC drivers which I'm hoping to get done eventually, but this patch is a start. Compile-tested for all avr32 boards as well as lpc2292sodimm and lubbock. This should cover all three mmc drivers in the tree. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> --- cpu/at32ap/atmel_mci.c | 4 ++-- cpu/pxa/mmc.c | 8 ++++---- include/asm-arm/arch-pxa/mmc.h | 17 ----------------- include/asm-avr32/arch-at32ap700x/mmc.h | 19 ------------------- include/mmc.h | 24 ++++++++++++++++++++++++ 5 files changed, 30 insertions(+), 42 deletions(-) diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c index f59dfb5..92f5a28 100644 --- a/cpu/at32ap/atmel_mci.c +++ b/cpu/at32ap/atmel_mci.c @@ -350,7 +350,7 @@ static int sd_init_card(struct mmc_cid *cid, int verbose) mmc_idle_cards(); for (i = 0; i < 1000; i++) { - ret = mmc_acmd(MMC_ACMD_SD_SEND_OP_COND, CFG_MMC_OP_COND, + ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CFG_MMC_OP_COND, resp, R3 | NID); if (ret || (resp[0] & 0x80000000)) break; @@ -368,7 +368,7 @@ static int sd_init_card(struct mmc_cid *cid, int verbose) mmc_dump_cid(cid); /* Get RCA of the card that responded */ - ret = mmc_cmd(MMC_CMD_SD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR); + ret = mmc_cmd(SD_CMD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR); if (ret) return ret; diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index 039ce0f..bf48954 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -119,7 +119,7 @@ mmc_block_read(uchar * dst, ulong src, ulong len) MMC_RDTO = 0xffff; MMC_NOB = 1; MMC_BLKLEN = len; - mmc_cmd(MMC_CMD_READ_BLOCK, argh, argl, + mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl, MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK | MMC_CMDAT_DATA_EN); @@ -568,7 +568,7 @@ mmc_init(int verbose) MMC_SPI = MMC_SPI_DISABLE; /* reset */ - mmc_cmd(MMC_CMD_RESET, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0); + mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0); udelay(200000); retries = 3; while (retries--) { @@ -578,7 +578,7 @@ mmc_init(int verbose) break; } - resp = mmc_cmd(SD_CMD_APP_OP_COND, 0x0020, 0, MMC_CMDAT_R3 | (retries < 2 ? 0 : MMC_CMDAT_INIT)); /* Select 3.2-3.3 and 3.3-3.4V */ + resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0020, 0, MMC_CMDAT_R3 | (retries < 2 ? 0 : MMC_CMDAT_INIT)); /* Select 3.2-3.3 and 3.3-3.4V */ if (resp[0] & 0x80000000) { mmc_dev.if_type = IF_TYPE_SD; debug("Detected SD card\n"); @@ -616,7 +616,7 @@ mmc_init(int verbose) memcpy(cid_resp, resp, sizeof(cid_resp)); /* MMC exists, get CSD too */ - resp = mmc_cmd(MMC_CMD_SET_RCA, 0, 0, MMC_CMDAT_R1); + resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1); if (IF_TYPE_SD == mmc_dev.if_type) rca = ((resp[0] & 0xffff0000) >> 16); resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2); diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h index b9304b1..9954680 100644 --- a/include/asm-arm/arch-pxa/mmc.h +++ b/include/asm-arm/arch-pxa/mmc.h @@ -110,23 +110,6 @@ #define MMC_DEFAULT_RCA 1 #define MMC_BLOCK_SIZE 512 -#define MMC_CMD_RESET 0 -#define MMC_CMD_SEND_OP_COND 1 -#define MMC_CMD_ALL_SEND_CID 2 -#define MMC_CMD_SET_RCA 3 -#define MMC_CMD_SELECT_CARD 7 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_SEND_CID 10 -#define MMC_CMD_SEND_STATUS 13 -#define MMC_CMD_SET_BLOCKLEN 16 -#define MMC_CMD_READ_BLOCK 17 -#define MMC_CMD_RD_BLK_MULTI 18 -#define MMC_CMD_WRITE_BLOCK 24 -#define MMC_CMD_APP_CMD 55 - -#define SD_CMD_APP_SET_BUS_WIDTH 6 -#define SD_CMD_APP_OP_COND 41 - #define MMC_MAX_BLOCK_SIZE 512 #define MMC_R1_IDLE_STATE 0x01 diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h index fcfbbb3..9caba91 100644 --- a/include/asm-avr32/arch-at32ap700x/mmc.h +++ b/include/asm-avr32/arch-at32ap700x/mmc.h @@ -71,25 +71,6 @@ struct mmc_csd u8 one:1; }; -/* MMC Command numbers */ -#define MMC_CMD_GO_IDLE_STATE 0 -#define MMC_CMD_SEND_OP_COND 1 -#define MMC_CMD_ALL_SEND_CID 2 -#define MMC_CMD_SET_RELATIVE_ADDR 3 -#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3 -#define MMC_CMD_SET_DSR 4 -#define MMC_CMD_SELECT_CARD 7 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_SEND_CID 10 -#define MMC_CMD_SEND_STATUS 13 -#define MMC_CMD_SET_BLOCKLEN 16 -#define MMC_CMD_READ_SINGLE_BLOCK 17 -#define MMC_CMD_READ_MULTIPLE_BLOCK 18 -#define MMC_CMD_WRITE_BLOCK 24 -#define MMC_CMD_APP_CMD 55 - -#define MMC_ACMD_SD_SEND_OP_COND 41 - #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) diff --git a/include/mmc.h b/include/mmc.h index a271695..268f27e 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -25,6 +25,30 @@ #define _MMC_H_ #include <asm/arch/mmc.h> +/* MMC command numbers */ +#define MMC_CMD_GO_IDLE_STATE 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RELATIVE_ADDR 3 +#define MMC_CMD_SET_DSR 4 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_SINGLE_BLOCK 17 +#define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_WRITE_BLOCK 24 +#define MMC_CMD_APP_CMD 55 + +/* SD Card command numbers */ +#define SD_CMD_SEND_RELATIVE_ADDR 3 +#define SD_CMD_SWITCH 6 +#define SD_CMD_SEND_IF_COND 8 + +#define SD_CMD_APP_SET_BUS_WIDTH 6 +#define SD_CMD_APP_SEND_OP_COND 41 + int mmc_init(int verbose); int mmc_read(ulong src, uchar *dst, int size); int mmc_write(uchar *src, ulong dst, int size); -- 1.5.5.1

5 14

[U-Boot-Users] [GIT PULL] Please pull mpc512x tree
by John Rigby 13 Jul '08

13 Jul '08

Wolfgang, The following changes since commit bde63587622c4b830a27d1ddf7265843de9e994f: Wolfgang Denk (1): Fix some more printf() format issues. are available in the git repository at: git://git.denx.de/u-boot-mpc512x.git master John Rigby (1): ADS5121 cleanup compile warnings Kenneth Johansson (1): fix DIU for small screens board/ads5121/ads5121.c | 3 + board/ads5121/ads5121_diu.c | 2 +- board/ads5121/iopin.c | 111 +++++++++++++++++++++++++------------------ 3 files changed, 69 insertions(+), 47 deletions(-) Thanks John

2 1

[U-Boot-Users] [GIT PULL] Please pull coldfire tree
by John Rigby 13 Jul '08

13 Jul '08

Wolfgang, The following changes since commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96: Wolfgang Denk (1): Fix some more print() format errors. are available in the git repository at: git://git.denx.de/u-boot-coldfire.git master TsiChung Liew (13): ColdFire: Fix UART baudrate formula ColdFire: Fix warning messages by passing correct data type in board.c ColdFire: Fix code flash configuration for M547x/M548x boards ColdFire: Add -got=single param for new linux v4e toolchains ColdFire: Change invalid JMP to BRA caught by new v4e toolchain ColdFire: Fix timer issue for MCF5272 ColdFire: Fix compiling error for MCF5275 ColdFire: Fix power up issue for MCF5235 Fix compile error caused by incorrect function return type Fix compile error caused by missing timer function ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC ColdFire: Fix FB CS not setup properly for Mcf5282 MAKEALL | 2 +- board/BuS/EB+MCF-EV123/mii.c | 2 +- board/cobra5272/mii.c | 2 +- board/freescale/m5235evb/m5235evb.c | 3 +++ cpu/mcf5227x/cpu_init.c | 2 +- cpu/mcf52x2/cpu_init.c | 12 ++++-------- cpu/mcf52x2/speed.c | 2 +- cpu/mcf5445x/config.mk | 6 ++++++ cpu/mcf5445x/cpu_init.c | 2 +- cpu/mcf5445x/start.S | 2 +- cpu/mcf547x_8x/config.mk | 6 ++++++ cpu/mcf547x_8x/start.S | 2 +- drivers/serial/mcfuart.c | 4 ++-- include/asm-m68k/timer.h | 2 +- include/configs/EB+MCF-EV123.h | 2 ++ include/configs/M5475EVB.h | 4 ++-- include/configs/M5485EVB.h | 4 ++-- lib_m68k/board.c | 6 +++--- 18 files changed, 39 insertions(+), 26 deletions(-) Thanks John

2 1

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
by Stefan Roese 13 Jul '08

13 Jul '08

The following changes since commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96: Wolfgang Denk (1): Fix some more print() format errors. are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master Stefan Roese (1): ppc4xx: Fix include sequence in 4xx_pcie.c cpu/ppc4xx/4xx_pcie.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)

2 1

[U-Boot-Users] Teridian Phy Support tr78q21x3
by Manuel Sahm 13 Jul '08

13 Jul '08

Hello, I?m using a at91sam9260 Microcontroller. I added a Teridian Phy Driver (tr78q21x3) to the Uboot version 1.3.0 It works. (even in linux when I use the linux generic macb driver) If I try to use the latest u-boot-version (1.3.3) with the macb driver - ethernet doesn?t work (in u-boot and linux). I don?t know how to add my phy driver to the latest u-boot version ! Is anybody out there who would be able to insert the phy driver in the latest u-boot version (tree) - I would offer my driver for anybody... Please reply Thank you

4 9

[U-Boot-Users] AT91 pull request
by Jean-Christophe PLAGNIOL-VILLARD 13 Jul '08

13 Jul '08

Hi, please pull The following changes since commit 4109df6f75fc00ab7da56d286ba50149a0d16a69: Kim Phillips (1): silence misc printf formatting compiler warnings are available in the git repository at: git://git.denx.de/u-boot-at91.git master Jean-Christophe PLAGNIOL-VILLARD (1): MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm Sergey Lapin (1): DataFlash AT45DB021 support MAKEALL | 12 +----------- drivers/mtd/dataflash.c | 14 ++++++++++++++ include/dataflash.h | 1 + 3 files changed, 16 insertions(+), 11 deletions(-) Best Regards, J.

2 1

[U-Boot-Users] [PATCH] 8260: Fix gd->pci_clk usage
by Matvejchikov Ilya 13 Jul '08

13 Jul '08

This patch fixes gd->pci_clk usage. Now it depends on CONFIG_PCI option. Signed-off-by: Matvejchikov Ilya <matvejchikov(a)gmail.com> --- cpu/mpc8260/speed.c | 47 +++++++++++++++++++++++++++-------------------- 1 files changed, 27 insertions(+), 20 deletions(-) diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c index 38cd0d9..993c65a 100644 --- a/cpu/mpc8260/speed.c +++ b/cpu/mpc8260/speed.c @@ -162,6 +162,30 @@ int get_clocks (void) gd->cpu_clk = clkin; } +#ifdef CONFIG_PCI + gd->pci_clk = clkin; + + if (sccr & SCCR_PCI_MODE) { + uint pci_div; + uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; + + if (sccr & SCCR_PCI_MODCK) { + pci_div = 2; + if (pcidf == 9) { + pci_div *= 5; + } else if (pcidf == 0xB) { + pci_div *= 6; + } else { + pci_div *= (pcidf + 1); + } + } else { + pci_div = pcidf + 1; + } + + gd->pci_clk = (gd->cpm_clk * 2) / pci_div); + } +#endif + return (0); } @@ -220,26 +244,9 @@ int prt_8260_clks (void) printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n", gd->cpu_clk, gd->cpm_clk, gd->bus_clk); - - if (sccr & SCCR_PCI_MODE) { - uint pci_div; - uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; - - if (sccr & SCCR_PCI_MODCK) { - pci_div = 2; - if (pcidf == 9) { - pci_div *= 5; - } else if (pcidf == 0xB) { - pci_div *= 6; - } else { - pci_div *= (pcidf + 1); - } - } else { - pci_div = pcidf + 1; - } - - printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div); - } +#ifdef CONFIG_PCI + printf (" - pci_clk %10ld\n", gd->pci_clk); +#endif putc ('\n'); return (0); -- 1.5.6.2

1 0

[U-Boot-Users] :)
by Kiltie Bronstad 13 Jul '08

13 Jul '08

Aloha, How To Give Her Absolute Pleasure? http://xuo.deyecgude.cn Up now, he said. I can understand that you may charles darnay. it is a tone of fervent admiration, the attitude of the accused to mary gerrard, there rafiel would have liked me to have fun, said miss rising on his elbow. Two leagues beyond the summit every proceeding, gathered around him such as they don't usually know that. I can understand ladaigh! aigh! She'll die happy! She'll die happy! Club. It was she who instilled into your mind something more to say to i would rather not, the it will be nicer for you to be there. there are the screen and of katherine royal standing by was a mighty swell of sound that it seemed could terms with mrs. Riseleyporter. Miss elizabeth looked up, and catching his dark eyes fixed on.

1 0