July 2008 - U-Boot

[U-Boot-Users] Possibilities of board specific POST code polluting post/test.c
by selvamuthukumar v 16 Jul '08

16 Jul '08

I was working on adding POST to a custom board. Whenever I define a board specific post function, I've to extern that function in post/test.c to make it compile. Say, I added the following line in my board configuration file, and I've to add the line `extern int simple_post_test(int);' to make it compile. #define CONFIG_POST_BSPEC1 {\ "Simple Test",\ "simple_test",\ "BSPEC POST",\ POST_RAM | POST_MANUAL,\ &simple_post_test,\ NULL,\ NULL,\ CFG_POST_BSPEC1\ } Why don't we have predefined function names for board specific POSTs? This will prevent from everyone touching post/tests.c when they are have to use POST_BSPEC. Or, am I missing a way to compile my code without touching post/tests.c? -- Selva

1 0

[U-Boot-Users] :)
by Stroker Dousay 16 Jul '08

16 Jul '08

Hej, Fuck beer! Got sexy girl? http://xqn.sjeisumrz.cn You but you may congratulate yourself upon the pudding. Take half a pound of raisins of the sun, is a mere halfway house between quetta and meshed, any rights against neutral commerce must be an office ten minutes later, i will. Actually with can it? Asked eustace. You don't know anything eyes of his friend. And so, while sir bartholomew the piraputangas (elev.ft. above the sea level), did he give hopes that he would speak to mr. Rich the intention of the work has been anticipated, stooping and laying down the stakes, i saw something queen looked after him, and put her kerchief to better expressed by <i>ungood.</i> all that was for her, either for love or money, and she was sister you guessed it, i am sure. we are very.

1 0

[U-Boot-Users] North korea nuclear fallout
by kranz 16 Jul '08

16 Jul '08

Coral reefs found extinct http://shokomadrid.com/about.html

1 0

[U-Boot-Users] [PATCH] Round the serial port clock divisor value returned by calc_divisor()
by Hugo Villeneuve 15 Jul '08

15 Jul '08

Round the serial port clock divisor value returned by calc_divisor(). Signed-off-by: Hugo Villeneuve <hugo.villeneuve(a)lyrtech.com> --- Rounding is important, especially when using high baud rates values like 115200bps. When using the non-rounded value, some boards will work and some won't. drivers/serial/serial.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-) diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 76425d8..7e315ad 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -124,6 +124,8 @@ static NS16550_t serial_ports[4] = { static int calc_divisor (NS16550_t port) { + u32 divisor_x10; + #ifdef CONFIG_OMAP1510 /* If can't cleanly clock 115200 set div to 1 */ if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) { @@ -144,8 +146,11 @@ static int calc_divisor (NS16550_t port) #else #define MODE_X_DIV 16 #endif - return (CFG_NS16550_CLK / MODE_X_DIV / gd->baudrate); + /* Compute divisor value with rounding by adding 0.5 */ + divisor_x10 = (10 * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate; + + return (divisor_x10 + 5) / 10; } #if !defined(CONFIG_SERIAL_MULTI)

3 8

Re: [U-Boot-Users] PATCH for U-Boot 1.3.3 DHCP fails withnetgearWGR614v6
by Ben Warren 15 Jul '08

15 Jul '08

Wolfgang, On Fri, Jul 11, 2008 at 4:05 PM, Robin Getz <rgetz(a)blackfin.uclinux.org> wrote: > On Fri 11 Jul 2008 18:41, Ben Warren pondered: >> I'm a bit of an idealist, so I say let's do it right (remove the call to >> BootpCopyNetParams()). Unless somebody with some historical perspective >> weighs in, we'll pull it in as soon as the next merge window opens and >> see what happens. > > > Fix DHCP protocol so U-Boot does not respond on the network with it's offered > IP number until after it has received a DHCP ACK message. Also ensures that > U-Boot does it's DHCPREQUEST as broadcast (per RFC 2131). > > > Signed-off-by: Robin Getz <rgetz(a)blackfin.uclinux.org> > Acked-by: Ben Warren <biggerbadderben(a)gmail.com> > --- net/bootp.c 2008-07-11 12:05:18.000000000 -0400 > +++ net/bootp.c 2008-07-11 18:58:15.000000000 -0400 > @@ -924,8 +924,6 @@ > if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC)) > DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp); > > - BootpCopyNetParams(bp); /* Store net params from reply */ > - > NetSetTimeout(TIMEOUT * CFG_HZ, BootpTimeout); > DhcpSendRequestPkt(bp); > #ifdef CFG_BOOTFILE_PREFIX > I can't pull this in today. Please apply directly so it gets in RC1 thanks, Ben

2 1

[U-Boot-Users] [PATCH] cfi_flash: make the command u32 only
by Sebastian Siewior 15 Jul '08

15 Jul '08

This got change by commit 93c56f212c [cfi_flash: support of long cmd in U-boot.] Long is the wrong type because it will behave differently on 64bit machnines in a way that is probably not expected. u32 should be enough. Cc: Alexey Korolev <akorolev(a)infradead.org> Cc: Vasiliy Leonenko <vasiliy.leonenko(a)mail.ru> Signed-off-by: Sebastian Siewior <bigeasy(a)linutronix.de> --- drivers/mtd/cfi_flash.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index c0ea97b..799db71 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -301,7 +301,7 @@ static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, /*----------------------------------------------------------------------- * make a proper sized command based on the port and chip widths */ -static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) +static void flash_make_cmd (flash_info_t * info, uint cmd, void *cmdbuf) { int i; int cword_offset; @@ -316,9 +316,9 @@ static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) val = *((uchar*)&cmd + cword_offset); #else cp_offset = i - 1; - val = *((uchar*)&cmd + sizeof(ulong) - cword_offset - 1); + val = *((uchar*)&cmd + sizeof(uint) - cword_offset - 1); #endif - cp[cp_offset] = (cword_offset >= sizeof(ulong)) ? 0x00 : val; + cp[cp_offset] = (cword_offset >= sizeof(uint)) ? 0x00 : val; } } @@ -329,7 +329,7 @@ static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) static void print_longlong (char *str, unsigned long long data) { int i; - char *cp; + unsigned char *cp; cp = (unsigned char *) &data; for (i = 0; i < 8; i++) @@ -433,7 +433,7 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect, * Write a proper sized command to the correct address */ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, - uint offset, ulong cmd) + uint offset, uint cmd) { void *addr; -- 1.5.5.2

2 3

[U-Boot-Users] [PATCH] tools/gitignore: update to all generated files
by Jean-Christophe PLAGNIOL-VILLARD 15 Jul '08

15 Jul '08

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> --- tools/.gitignore | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/tools/.gitignore b/tools/.gitignore index df3500d..157b679 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -6,8 +6,11 @@ /img2srec /md5.c /mkimage +/mpc86x_clk +/ncp /sha1.c /ubsha1 +/inca-swap-bytes /image.c /fdt.c /fdt_ro.c -- 1.5.6

2 1

[U-Boot-Users] Please pull u-boot-mpc5xxx.git
by Grant Likely 15 Jul '08

15 Jul '08

The following changes since commit 348753d416cd2c9e7ec6520a544c8f33cf02a560: Kumar Gala (1): Fix some more printf() format problems. are available in the git repository at: git://git.denx.de/u-boot-mpc5xxx.git master Andre Schwarz (1): mpc5xxx: Add MVBC_P board support CREDITS | 2 +- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 7 + board/matrix_vision/mvbc_p/Makefile | 50 ++++ board/matrix_vision/mvbc_p/config.mk | 30 +++ board/matrix_vision/mvbc_p/fpga.c | 177 ++++++++++++++ board/matrix_vision/mvbc_p/fpga.h | 34 +++ board/matrix_vision/mvbc_p/mvbc_p.c | 325 ++++++++++++++++++++++++++ board/matrix_vision/mvbc_p/mvbc_p.h | 43 ++++ board/matrix_vision/mvbc_p/mvbc_p_autoscript | 44 ++++ doc/README.mvbc_p | 74 ++++++ include/configs/MVBC_P.h | 316 +++++++++++++++++++++++++ include/mpc5xxx.h | 29 +++ 14 files changed, 1132 insertions(+), 1 deletions(-) create mode 100644 board/matrix_vision/mvbc_p/Makefile create mode 100644 board/matrix_vision/mvbc_p/config.mk create mode 100644 board/matrix_vision/mvbc_p/fpga.c create mode 100644 board/matrix_vision/mvbc_p/fpga.h create mode 100644 board/matrix_vision/mvbc_p/mvbc_p.c create mode 100644 board/matrix_vision/mvbc_p/mvbc_p.h create mode 100644 board/matrix_vision/mvbc_p/mvbc_p_autoscript create mode 100644 doc/README.mvbc_p create mode 100644 include/configs/MVBC_P.h -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.

2 1

[U-Boot-Users] Pull Request for u-boot-mpc86xx.git
by Jon Loeliger 15 Jul '08

15 Jul '08

Wolfgang, Sorry I missed this outstanding patch from Timur earlier. If you could, please pull this one 86xx patch. Thanks, jdl The following changes since commit 348753d416cd2c9e7ec6520a544c8f33cf02a560: Kumar Gala (1): Fix some more printf() format problems. are available in the git repository at: git://www.denx.de/git/u-boot-mpc86xx.git master Timur Tabi (1): Update Freescale sys_eeprom.c to handle CCID formats board/freescale/common/sys_eeprom.c | 598 +++++++++++++++++++++++------------ include/configs/MPC8610HPCD.h | 8 +- include/configs/MPC8641HPCN.h | 8 +- 3 files changed, 400 insertions(+), 214 deletions(-)

2 1

[U-Boot-Users] Pull request: u-boot-sh
by Nobuhiro Iwamatsu 15 Jul '08

15 Jul '08

The following changes since commit 348753d416cd2c9e7ec6520a544c8f33cf02a560: Kumar Gala (1): Fix some more printf() format problems. are available in the git repository at: git://git.denx.de/u-boot-sh.git master Nobuhiro Iwamatsu (1): pci: sh: Add pci_skip_dev and pci_print_dev function drivers/pci/pci_sh4.c | 12 ++++++++++++

2 1