March 2008 - U-Boot

[U-Boot-Users] [PATCH] Add CONFIG_MII_INIT in cmd_mii.c
by Tsi-Chung Liew 30 Mar '08

30 Mar '08

Provide common configuration in do_mii() to execute mii_init() for all cpu architectures Signed-off-by: TsiChung Liew <Tsi-Chung.Liew(a)freescale.com> --- common/cmd_mii.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 31ac43d..8ca5af5 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -306,7 +306,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } -#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) +#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x || defined(CONFIG_MII_INIT)) mii_init (); #endif -- 1.5.4.1

2 1

Re: [U-Boot-Users] [PATCH] ixp: Support for NSLU2
by Peter Pearse 29 Mar '08

29 Mar '08

> -----Original Message----- > From: Rod Whitby [mailto:rod@whitby.id.au] > Sent: 29 March 2008 15:01 > To: Peter Pearse > Subject: Re: [U-Boot-Users] [PATCH] ixp: Support for NSLU2 > > Peter Pearse wrote: > > I just need a Signed-off-by line. Example: > > Sorry about that. I've resent the patch with the signed-off-by added. > > -- Rod > Ta

1 0

[U-Boot-Users] Amazing lovemaking is now possible
by harbir Bardell 29 Mar '08

29 Mar '08

Important information on love making When I look back at 6 months of my life, it is well worth it http://www.nooguui.com/

1 0

[U-Boot-Users] [PATCH] SPARC: CFI flash_read64 is defined a weak function.
by Daniel Hellstrom 29 Mar '08

29 Mar '08

Hello Wolfgang and Stefan, SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. SPARC CPUs implement flash_read64 which calls __raw_readq. For current SPARC architectures (LEON2 and LEON3) each read from the FLASH must lead to a cache miss. This is because FLASH can not be set non-cacheable since program code resides there, and alternatively disabling cache is poor from performance view, or doing a cache flush between each read is even poorer. Forcing a cache miss on a SPARC is done by a special instruction "lda" - load alternative space, the alternative space number (ASI) is processor implementation spcific and can be found by including <asm/processor.h>. This patch is also available at ftp://ftp.gaisler.com/gaisler.com/uboot/patches. Best Regards, Daniel Hellstrom Signed-off-by: Daniel Hellstrom <daniel(a)gaisler.com> --- drivers/mtd/cfi_flash.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f04c72d..a55afc9 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -239,12 +239,14 @@ static u32 flash_read32(void *addr) return __raw_readl(addr); } -static u64 flash_read64(void *addr) +static u64 __flash_read64(void *addr) { /* No architectures currently implement __raw_readq() */ return *(volatile u64 *)addr; } +u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); + /*----------------------------------------------------------------------- */ #if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE) -- 1.5.4

2 1

[U-Boot-Users] [PATCH] Add support for 16bit legacy AMD flash
by Tor Krill 29 Mar '08

29 Mar '08

Add entry for 512Kx16 AMD flash to jedec_table. Read out 16bit device id if chipwidth is 16bit Signed-off-by: Tor Krill <tor(a)excito.com> --- drivers/mtd/cfi_flash.c | 44 +++++++++++++++++++++++++++++++++++--------- drivers/mtd/jedec_flash.c | 19 +++++++++++++++++++ 2 files changed, 54 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f04c72d..fab26b8 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -365,6 +365,20 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset) } /*----------------------------------------------------------------------- + * read a word at a port width address, assume 16bit bus + */ +static inline ushort flash_read_word (flash_info_t * info, uint offset) +{ + ushort *addr, retval; + + addr = flash_map (info, 0, offset); + retval = flash_read16(addr); + flash_unmap (info, 0, offset, addr); + return retval; +} + + +/*----------------------------------------------------------------------- * read a long word by picking the least significant byte of each maximum * port size word. Swap for ppc format. */ @@ -1449,17 +1463,29 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) flash_unlock_seq(info, 0); flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); - if (info->device_id == 0x7E) { - /* AMD 3-byte (expanded) device ids */ - info->device_id2 = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID2); - info->device_id2 <<= 8; - info->device_id2 |= flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID3); + + switch(info->chipwidth){ + case FLASH_CFI_8BIT: + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + if (info->device_id == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } + break; + case FLASH_CFI_16BIT: + info->device_id = flash_read_word (info, + FLASH_OFFSET_DEVICE_ID); + break; + default: + break; } flash_write_cmd(info, 0, 0, AMD_CMD_RESET); } diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c index 41aad3b..b958d17 100644 --- a/drivers/mtd/jedec_flash.c +++ b/drivers/mtd/jedec_flash.c @@ -216,6 +216,25 @@ static const struct amd_flash_info jedec_table[] = { } }, #endif +#ifdef CFG_FLASH_LEGACY_512Kx16 + { + .mfr_id = MANUFACTURER_AMD, + .dev_id = AM29LV400BB, + .name = "AMD AM29LV400BB", + .uaddr = { + [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ + }, + .DevSize = SIZE_512KiB, + .CmdSet = CFI_CMDSET_AMD_LEGACY, + .NumEraseRegions= 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7), + } + }, +#endif }; static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) -- 1.5.4.4

2 3

[U-Boot-Users] [PATCH] remove remaining CONFIG_OF_HAS_{UBOOT_ENV, BD_T} code
by Kim Phillips 29 Mar '08

29 Mar '08

finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" started. Signed-off-by: Kim Phillips <kim.phillips(a)freescale.com> --- This one's for you, Wolfgang. README | 13 ------ common/ft_build.c | 113 ----------------------------------------------------- lib_ppc/bootm.c | 12 ------ 3 files changed, 0 insertions(+), 138 deletions(-) diff --git a/README b/README index 5cbe7c1..18b720c 100644 --- a/README +++ b/README @@ -372,19 +372,6 @@ The following options need to be configured: boards with QUICC Engines require OF_QE to set UCC mac addresses - CONFIG_OF_HAS_BD_T - - * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command - * CONFIG_OF_FLAT_TREE - The resulting flat device tree - will have a copy of the bd_t. Space should be - pre-allocated in the dts for the bd_t. - - CONFIG_OF_HAS_UBOOT_ENV - - * CONFIG_OF_LIBFDT - enables the "fdt env" command - * CONFIG_OF_FLAT_TREE - The resulting flat device tree - will have a copy of u-boot's environment variables - CONFIG_OF_BOARD_SETUP Board code has addition modification that it wants to make diff --git a/common/ft_build.c b/common/ft_build.c index 5a0575e..0e5699a 100644 --- a/common/ft_build.c +++ b/common/ft_build.c @@ -399,72 +399,12 @@ void *ft_get_prop(void *bphp, const char *propname, int *szp) /* Function that returns a character from the environment */ extern uchar(*env_get_char) (int); -#define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) } - -#ifdef CONFIG_OF_HAS_BD_T -static const struct { - const char *name; - int offset; -} bd_map[] = { - BDM(memstart), - BDM(memsize), - BDM(flashstart), - BDM(flashsize), - BDM(flashoffset), - BDM(sramstart), - BDM(sramsize), -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ - || defined(CONFIG_E500) - BDM(immr_base), -#endif -#if defined(CONFIG_MPC5xxx) - BDM(mbar_base), -#endif -#if defined(CONFIG_MPC83XX) - BDM(immrbar), -#endif -#if defined(CONFIG_MPC8220) - BDM(mbar_base), - BDM(inpfreq), - BDM(pcifreq), - BDM(pevfreq), - BDM(flbfreq), - BDM(vcofreq), -#endif - BDM(bootflags), - BDM(ip_addr), - BDM(intfreq), - BDM(busfreq), -#ifdef CONFIG_CPM2 - BDM(cpmfreq), - BDM(brgfreq), - BDM(sccfreq), - BDM(vco), -#endif -#if defined(CONFIG_MPC5xxx) - BDM(ipbfreq), - BDM(pcifreq), -#endif - BDM(baudrate), -}; -#endif - void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end) { u32 *p; int len; struct ft_cxt cxt; ulong clock; -#if defined(CONFIG_OF_HAS_UBOOT_ENV) - int k, nxt; -#endif -#if defined(CONFIG_OF_HAS_BD_T) - u8 *end; -#endif -#if defined(CONFIG_OF_HAS_UBOOT_ENV) || defined(CONFIG_OF_HAS_BD_T) - int i; - static char tmpenv[256]; -#endif /* disable OF tree; booting old kernel */ if (getenv("disable_of") != NULL) { @@ -485,30 +425,6 @@ void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end) /* back into root */ ft_backtrack_node(&cxt); -#ifdef CONFIG_OF_HAS_UBOOT_ENV - ft_begin_node(&cxt, "u-boot-env"); - - for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) { - char *s, *lval, *rval; - - for (nxt = i; env_get_char(nxt) != '\0'; ++nxt) ; - s = tmpenv; - for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k) - *s++ = env_get_char(k); - *s++ = '\0'; - lval = tmpenv; - s = strchr(tmpenv, '='); - if (s != NULL) { - *s++ = '\0'; - rval = s; - } else - continue; - ft_prop_str(&cxt, lval, rval); - } - - ft_end_node(&cxt); -#endif - ft_begin_node(&cxt, "chosen"); ft_prop_str(&cxt, "name", "chosen"); @@ -529,36 +445,7 @@ void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end) ft_end_tree(&cxt); ft_finalize_tree(&cxt); -#ifdef CONFIG_OF_HAS_BD_T - /* paste the bd_t at the end of the flat tree */ - end = (char *)blob + - be32_to_cpu(((struct boot_param_header *)blob)->totalsize); - memcpy(end, bd, sizeof(*bd)); -#endif - #ifdef CONFIG_PPC - -#ifdef CONFIG_OF_HAS_BD_T - for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) { - uint32_t v; - - sprintf(tmpenv, "/bd_t/%s", bd_map[i].name); - v = *(uint32_t *)((char *)bd + bd_map[i].offset); - - p = ft_get_prop(blob, tmpenv, &len); - if (p != NULL) - *p = cpu_to_be32(v); - } - - p = ft_get_prop(blob, "/bd_t/enetaddr", &len); - if (p != NULL) - memcpy(p, bd->bi_enetaddr, 6); - - p = ft_get_prop(blob, "/bd_t/ethspeed", &len); - if (p != NULL) - *p = cpu_to_be32((uint32_t) bd->bi_ethspeed); -#endif - clock = bd->bi_intfreq; p = ft_get_prop(blob, "/cpus/" OF_CPU "/clock-frequency", &len); if (p != NULL) diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c index b893146..2901607 100644 --- a/lib_ppc/bootm.c +++ b/lib_ppc/bootm.c @@ -184,18 +184,6 @@ do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], fdt_error ("/chosen node create failed"); goto error; } -#ifdef CONFIG_OF_HAS_UBOOT_ENV - if (fdt_env(of_flat_tree) < 0) { - fdt_error ("/u-boot-env node create failed"); - goto error; - } -#endif -#ifdef CONFIG_OF_HAS_BD_T - if (fdt_bd_t(of_flat_tree) < 0) { - fdt_error ("/bd_t node create failed"); - goto error; - } -#endif #ifdef CONFIG_OF_BOARD_SETUP /* Call the board-specific fixup routine */ ft_board_setup(of_flat_tree, gd->bd); -- 1.5.5.rc0.16.g02b00

2 1

Re: [U-Boot-Users] [PATCH] Make MPC83xx one step closer to full relocation.
by Kim Phillips 29 Mar '08

29 Mar '08

On Sat, 29 Mar 2008 00:47:01 +0100 "Joakim Tjernlund" <Joakim.Tjernlund(a)transmode.se> wrote: > > -----Original Message----- > > From: Kim Phillips [mailto:kim.phillips@freescale.com] > > Sent: den 29 mars 2008 00:33 > > To: Joakim Tjernlund > > Cc: u-boot-users(a)lists.sourceforge.net > > Subject: Re: [PATCH] Make MPC83xx one step closer to full relocation. > > > > On Fri, 28 Mar 2008 15:41:25 +0100 > > Joakim Tjernlund <Joakim.Tjernlund(a)transmode.se> wrote: > > > > > Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx > > > and use GOT relative reference. > > > --- > > > cpu/mpc83xx/start.S | 11 +++++++---- > > > lib_ppc/board.c | 3 ++- > > > 2 files changed, 9 insertions(+), 5 deletions(-) > > > > Joakim, > > > > this patch is missing your signoff, and doesn't apply cleanly (even > > adds whitespace). > > It doesn't apply because you have been sitting on it for too long :) > I sent long ago and you said would apply it in the next merge window, > but seems to have forgotten about it. Sorry for the whitespace. I am still > on the last u-boot release so I am afraid I can't do much about it ATM. > I hope you can clean up the WS. > > Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund(a)transmode.se> ok, I can add it now. Kim

2 1

[U-Boot-Users] [PATCH] Make MPC83xx one step closer to full relocation.
by Joakim Tjernlund 29 Mar '08

29 Mar '08

Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx and use GOT relative reference. --- cpu/mpc83xx/start.S | 11 +++++++---- lib_ppc/board.c | 3 ++- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 1dfbf62..56fd7ec 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -172,8 +172,11 @@ boot_warm: /* time t 5 */ /* there and deflate the flash size back to minimal size */ /*------------------------------------------------------------*/ bl map_flash_by_law1 - lis r4, (CFG_MONITOR_BASE)@h - ori r4, r4, (CFG_MONITOR_BASE)@l + + GET_GOT /* initialize GOT access */ + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET + addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET mtlr r5 blr @@ -906,8 +909,8 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 45d1328..8a18350 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -117,6 +117,7 @@ DECLARE_GLOBAL_DATA_PTR; #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN #endif +extern ulong _start; extern ulong __init_end; extern ulong _end; ulong monitor_flash_len; @@ -417,7 +418,7 @@ void board_init_f (ulong bootflag) * - monitor code * - board info struct */ - len = (ulong)&_end - CFG_MONITOR_BASE; + len = (ulong)&_end - (ulong)&_start + EXC_OFF_SYS_RESET; #ifndef CONFIG_VERY_BIG_RAM addr = CFG_SDRAM_BASE + gd->ram_size; -- 1.5.3.8

2 2

Re: [U-Boot-Users] [PATCH 3/3] mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
by Kim Phillips 29 Mar '08

29 Mar '08

On Fri, 28 Mar 2008 21:01:30 +0100 "Joakim Tjernlund" <Joakim.Tjernlund(a)transmode.se> wrote: > BTW, what happened to relocation stuff Grant was doing? It is > still disabled, I never had any problems so perhaps time to > turn it on again? it might even make u-boot smaller once all the > old manuel relocation code has been properly disabled. > beats me. I'm all for it, but I think we're still supposed to support a wide range of toolchain versions (the reason Grant's stuff got reverted). Kim

3 2

[U-Boot-Users] [PATCH] Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
by Tsi-Chung Liew 29 Mar '08

29 Mar '08

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew(a)freescale.com> --- drivers/pci/pci_auto.c | 2 +- include/configs/BC3450.h | 1 + include/configs/M54455EVB.h | 2 +- include/configs/M5475EVB.h | 2 +- include/configs/M5485EVB.h | 1 + include/configs/PM520.h | 1 + include/configs/TOP5200.h | 1 + include/configs/TQM5200.h | 1 + include/configs/Total5200.h | 1 + include/configs/aev.h | 1 + include/configs/cpci5200.h | 1 + include/configs/hmi1001.h | 1 + include/configs/inka4x0.h | 1 + include/configs/jupiter.h | 1 + include/configs/o2dnt.h | 1 + include/configs/pf5200.h | 1 + include/configs/spieval.h | 1 + 17 files changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 1085a6c..a20b4e1 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -383,7 +383,7 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) hose->current_busno++; break; -#if defined(CONFIG_MPC5200) || defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE) +#ifdef CONFIG_PCIAUTO_SKIP_HOST_BRIDGE case PCI_CLASS_BRIDGE_OTHER: DEBUGF("PCI Autoconfig: Skipping bridge device %d\n", PCI_DEV(dev)); diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 3d09ee7..706c13e 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -87,6 +87,7 @@ # define CONFIG_PCI 1 # define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 5f55761..f5edddf 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -175,7 +175,7 @@ #ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 -#define CONFIG_SKIPPCI_HOSTBRIDGE +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CFG_PCI_CACHE_LINE_SIZE 4 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index f0d42be..a4e6c5d 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -132,7 +132,7 @@ #ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 -#define CONFIG_SKIPPCI_HOSTBRIDGE +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CFG_PCI_CACHE_LINE_SIZE 8 diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 88dd219..9121023 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -129,6 +129,7 @@ #ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CFG_PCI_MEM_BUS 0x80000000 #define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS diff --git a/include/configs/PM520.h b/include/configs/PM520.h index d9405b0..ad480a6 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -57,6 +57,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index dea5ead..1affcfd 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -67,6 +67,7 @@ # define CONFIG_PCI 1 # define CONFIG_PCI_PNP 1 # define CONFIG_PCI_SCAN_SHOW 1 +# define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 # define CONFIG_PCI_MEM_BUS 0x40000000 # define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 9a0e9b8..30d7baf 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -85,6 +85,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 2e9a2bc..2507d77 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -80,6 +80,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/aev.h b/include/configs/aev.h index 0163025..2785db1 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -60,6 +60,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index ce4ea1f..1b30e51 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -69,6 +69,7 @@ #define CONFIG_PCI_PNP 1 #endif #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 4347625..e5a8897 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -336,6 +336,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 6f45c04..c89f041 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -55,6 +55,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 8c6075f..0ac3e7e 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -58,6 +58,7 @@ #if defined(CONFIG_PCI) #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index f75e194..8dde1ef 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -52,6 +52,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 18d0c87..2ce39c9 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -69,6 +69,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/spieval.h b/include/configs/spieval.h index a9ce015..02c6b20 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -68,6 +68,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -- 1.5.4.1

3 3