October 2008 - U-Boot

[U-Boot] [POWERPC v2] mgsuvd: fix compiler warning when using soft_i2c driver
by Heiko Schocher 17 Oct '08

17 Oct '08

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- This Patch replaces the Patch: http://lists.denx.de/pipermail/u-boot/2008-October/041890.html [U-Boot] [POWERPC] mgsuvd: fix compiler warning when using soft_i2c driver board/keymile/common/common.c | 3 ++- board/keymile/mgsuvd/mgsuvd.c | 12 +----------- drivers/i2c/soft_i2c.c | 4 ++++ include/configs/mgsuvd.h | 26 +++++++++++++++++--------- 4 files changed, 24 insertions(+), 21 deletions(-) diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 61276d2..08cb1ef 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -34,6 +34,7 @@ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h> #endif +#include <asm/io.h> extern int i2c_soft_read_pin (void); @@ -400,7 +401,7 @@ static void set_scl (int state) static int get_sda (void) { - return i2c_soft_read_pin (); + return I2C_READ; } static int get_scl (void) diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c index ec13746..ba240b8 100644 --- a/board/keymile/mgsuvd/mgsuvd.c +++ b/board/keymile/mgsuvd/mgsuvd.c @@ -22,6 +22,7 @@ */ #include <common.h> #include <mpc8xx.h> +#include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) #include <libfdt.h> @@ -226,14 +227,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_blob_update (blob, bd); } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ - -int i2c_soft_read_pin (void) -{ - int val; - - *(unsigned short *)(I2C_BASE_DIR) &= ~SDA_CONF; - udelay(1); - val = *(unsigned char *)(I2C_BASE_PORT); - - return ((val & SDA_BIT) == SDA_BIT); -} diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 508d3d7..ebe60e2 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -28,6 +28,7 @@ #include <common.h> #ifdef CONFIG_MPC8260 /* only valid for MPC8260 */ #include <ioports.h> +#include <asm/io.h> #endif #ifdef CONFIG_AT91RM9200 /* need this for the at91rm9200 */ #include <asm/io.h> @@ -39,6 +40,9 @@ #ifdef CONFIG_LPC2292 #include <asm/arch/hardware.h> #endif +#ifdef CONFIG_MPC866 /* only valid for MPC866 */ +#include <asm/io.h> +#endif #include <i2c.h> /* #define DEBUG_I2C */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 7a80dad..32b636f 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -346,8 +346,10 @@ /* * Software (bit-bang) I2C driver configuration */ -#define I2C_BASE_DIR (CONFIG_SYS_PIGGY_BASE + 0x04) -#define I2C_BASE_PORT (CONFIG_SYS_PIGGY_BASE + 0x09) +#define I2C_BASE_DIR (volatile unsigned short __iomem *) \ + (CONFIG_SYS_PIGGY_BASE + 0x04) +#define I2C_BASE_PORT (volatile unsigned char __iomem *) \ + (CONFIG_SYS_PIGGY_BASE + 0x09) #define SDA_BIT 0x40 #define SCL_BIT 0x80 @@ -356,20 +358,26 @@ #define I2C_ACTIVE do {} while (0) #define I2C_TRISTATE do {} while (0) -#define I2C_READ i2c_soft_read_pin () +#define I2C_READ ((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT) #define I2C_SDA(bit) if(bit) { \ - *(unsigned short *)(I2C_BASE_DIR) &= ~SDA_CONF; \ + out_be16(I2C_BASE_DIR, \ + in_be16(I2C_BASE_DIR) & ~SDA_CONF); \ } \ else { \ - *(unsigned char *)(I2C_BASE_PORT) &= ~SDA_BIT; \ - *(unsigned short *)(I2C_BASE_DIR) |= SDA_CONF; \ + out_8(I2C_BASE_PORT, \ + in_8(I2C_BASE_PORT) & ~SDA_BIT); \ + out_be16(I2C_BASE_DIR, \ + in_be16(I2C_BASE_DIR) | SDA_CONF); \ } #define I2C_SCL(bit) if(bit) { \ - *(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF; \ + out_be16(I2C_BASE_DIR, \ + in_be16(I2C_BASE_DIR) & ~SCL_CONF); \ } \ else { \ - *(unsigned char *)(I2C_BASE_PORT) &= ~SCL_BIT; \ - *(unsigned short *)(I2C_BASE_DIR) |= SCL_CONF; \ + out_8(I2C_BASE_PORT, \ + in_8(I2C_BASE_PORT) & ~SCL_BIT); \ + out_be16(I2C_BASE_DIR, \ + in_be16(I2C_BASE_DIR) | SCL_CONF); \ } #define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */ -- 1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [POWERPC] mgcoge, mgsuvd: cleanups
by Heiko Schocher 17 Oct '08

17 Oct '08

mgcoge: Second Flash on CS5 use in_*/out_* accessors mgsuvd: fix Codingstyle issues use in_*/out_* accessors Signed-off-by: Heiko Schocher <hs(a)denx.de> --- This Patch replaces the Patches: http://lists.denx.de/pipermail/u-boot/2008-October/041881.html [U-Boot] [POWERPC] mgcoge: correct init of the UPIOx http://lists.denx.de/pipermail/u-boot/2008-October/041892.html [U-Boot] [POWERPC] mgcoge: Second Flash on CS5 not on CS1 board/keymile/mgcoge/mgcoge.c | 9 +++-- board/keymile/mgsuvd/mgsuvd.c | 73 ++++++++++++++++++---------------------- 2 files changed, 39 insertions(+), 43 deletions(-) diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 7d4d9e6..9c6039d 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -25,6 +25,7 @@ #include <mpc8260.h> #include <ioports.h> #include <malloc.h> +#include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) #include <libfdt.h> @@ -295,8 +296,10 @@ int checkboard(void) int board_early_init_r (void) { /* setup the UPIOx */ - *(char *)(CONFIG_SYS_PIGGY_BASE + 0x02) = 0xc0; - *(char *)(CONFIG_SYS_PIGGY_BASE + 0x03) = 0x15; + out_8((volatile unsigned char __iomem *) + (CONFIG_SYS_PIGGY_BASE + 0x02), 0xc0); + out_8((volatile unsigned char __iomem *) + (CONFIG_SYS_PIGGY_BASE + 0x03), 0x15); return 0; } @@ -334,7 +337,7 @@ void ft_blob_update (void *blob, bd_t *bd) /* update Flash addr, size */ flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE); flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE); - flash_data[4] = cpu_to_be32 (1); + flash_data[4] = cpu_to_be32 (5); flash_data[5] = cpu_to_be32 (0); flash_data[6] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE_1); flash_data[7] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE_1); diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c index 912e177..ec13746 100644 --- a/board/keymile/mgsuvd/mgsuvd.c +++ b/board/keymile/mgsuvd/mgsuvd.c @@ -20,11 +20,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ - -#if 0 -#define DEBUG -#endif - #include <common.h> #include <mpc8xx.h> @@ -142,8 +137,10 @@ phys_size_t initdram (int board_type) int board_early_init_r(void) { /* setup the UPIOx */ - *(char *)(CONFIG_SYS_PIGGY_BASE + 0x02) = 0xc0; - *(char *)(CONFIG_SYS_PIGGY_BASE + 0x03) = 0x35; + out_8((volatile unsigned char __iomem *) + (CONFIG_SYS_PIGGY_BASE + 0x02), 0xc0); + out_8((volatile unsigned char __iomem *) + (CONFIG_SYS_PIGGY_BASE + 0x03), 0x35); return 0; } @@ -157,80 +154,76 @@ int hush_init_var (void) /* * update "memory" property in the blob */ -void ft_blob_update(void *blob, bd_t *bd) +void ft_blob_update (void *blob, bd_t *bd) { int ret, nodeoffset = 0; ulong brg_data[1] = {0}; ulong memory_data[2] = {0}; ulong flash_data[4] = {0}; - memory_data[0] = cpu_to_be32(bd->bi_memstart); - memory_data[1] = cpu_to_be32(bd->bi_memsize); + memory_data[0] = cpu_to_be32 (bd->bi_memstart); + memory_data[1] = cpu_to_be32 (bd->bi_memsize); - nodeoffset = fdt_path_offset (blob, "/memory"); - if (nodeoffset >= 0) { - ret = fdt_setprop(blob, nodeoffset, "reg", memory_data, - sizeof(memory_data)); + nodeoffset = fdt_path_offset (blob, "/memory"); + if (nodeoffset >= 0) { + ret = fdt_setprop (blob, nodeoffset, "reg", memory_data, + sizeof (memory_data)); if (ret < 0) printf("ft_blob_update(): cannot set /memory/reg " - "property err:%s\n", fdt_strerror(ret)); - } - else { + "property err:%s\n", fdt_strerror (ret)); + } else { /* memory node is required in dts */ printf("ft_blob_update(): cannot find /memory node " - "err:%s\n", fdt_strerror(nodeoffset)); + "err:%s\n", fdt_strerror (nodeoffset)); } - flash_data[2] = cpu_to_be32(bd->bi_flashstart); - flash_data[3] = cpu_to_be32(bd->bi_flashsize); + flash_data[2] = cpu_to_be32 (bd->bi_flashstart); + flash_data[3] = cpu_to_be32 (bd->bi_flashsize); nodeoffset = fdt_path_offset (blob, "/localbus"); if (nodeoffset >= 0) { - ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data, - sizeof(flash_data)); + ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data, + sizeof (flash_data)); if (ret < 0) printf("ft_blob_update(): cannot set /localbus/ranges " - "property err:%s\n", fdt_strerror(ret)); - } - else { + "property err:%s\n", fdt_strerror (ret)); + } else { /* memory node is required in dts */ printf("ft_blob_update(): cannot find /localbus node " - "err:%s\n", fdt_strerror(nodeoffset)); + "err:%s\n", fdt_strerror (nodeoffset)); } /* BRG */ - brg_data[0] = cpu_to_be32(bd->bi_busfreq); + brg_data[0] = cpu_to_be32 (bd->bi_busfreq); nodeoffset = fdt_path_offset (blob, "/soc/cpm"); if (nodeoffset >= 0) { - ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data, - sizeof(brg_data)); + ret = fdt_setprop (blob, nodeoffset, "brg-frequency", brg_data, + sizeof (brg_data)); if (ret < 0) printf("ft_blob_update(): cannot set /soc/cpm/brg-frequency " "property err:%s\n", fdt_strerror(ret)); - } - else { + } else { /* memory node is required in dts */ printf("ft_blob_update(): cannot find /soc/cpm node " - "err:%s\n", fdt_strerror(nodeoffset)); + "err:%s\n", fdt_strerror (nodeoffset)); } /* MAC Adresse */ nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet"); if (nodeoffset >= 0) { - ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr, - sizeof(uchar) * 6); + ret = fdt_setprop (blob, nodeoffset, "mac-address", bd->bi_enetaddr, + sizeof (uchar) * 6); if (ret < 0) printf("ft_blob_update(): cannot set /soc/cpm/scc/mac-address " - "property err:%s\n", fdt_strerror(ret)); - } - else { + "property err:%s\n", fdt_strerror (ret)); + } else { /* memory node is required in dts */ printf("ft_blob_update(): cannot find /soc/cpm/ethernet node " - "err:%s\n", fdt_strerror(nodeoffset)); + "err:%s\n", fdt_strerror (nodeoffset)); } } void ft_board_setup(void *blob, bd_t *bd) { - ft_cpu_setup( blob, bd); - ft_blob_update(blob, bd); + ft_cpu_setup (blob, bd); + ft_blob_update (blob, bd); } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ -- 1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [POWERPC] i2c: Fix help text for i2c reset command.
by Heiko Schocher 17 Oct '08

17 Oct '08

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- This Patch fixes a typo in Patch: http://lists.denx.de/pipermail/u-boot/2008-October/041807.html [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset. common/cmd_i2c.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index d8f84dc..84ecf49 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1322,7 +1322,7 @@ U_BOOT_CMD( "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" "i2c probe - show devices on the I2C bus\n" - "i2c reset - reinit the I2C Controller\n" + "i2c reset - re-init the I2C Controller\n" "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" #if defined(CONFIG_CMD_SDRAM) "i2c sdram chip - print SDRAM configuration information\n" -- 1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [PATCH v3] Added arch_lmb_reserve to allow arch specific memory regions protection
by Kumar Gala 17 Oct '08

17 Oct '08

Each architecture has different ways of determine what regions of memory might not be valid to get overwritten when we boot. This provides a hook to allow them to reserve any regions they care about. Currently only ppc, m68k and sparc need/use this. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- Updated against latest next tree. - k common/cmd_bootm.c | 7 +++++++ lib_m68k/bootm.c | 29 ++++++++++++++++------------- lib_ppc/bootm.c | 50 ++++++++++++++++++++++++++++---------------------- lib_sparc/bootm.c | 16 +++++++++------- 4 files changed, 60 insertions(+), 42 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 2a9c59f..b02da3e 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -128,6 +128,12 @@ void __board_lmb_reserve(struct lmb *lmb) } void board_lmb_reserve(struct lmb *lmb) __attribute__((weak, alias("__board_lmb_reserve"))); +void __arch_lmb_reserve(struct lmb *lmb) +{ + /* please define platform specific arch_lmb_reserve() */ +} +void arch_lmb_reserve(struct lmb *lmb) __attribute__((weak, alias("__arch_lmb_reserve"))); + #if defined(__ARM__) #define IH_INITRD_ARCH IH_ARCH_ARM #elif defined(__avr32__) @@ -173,6 +179,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) lmb_add(&images.lmb, (phys_addr_t)mem_start, mem_size); + arch_lmb_reserve(&images.lmb); board_lmb_reserve(&images.lmb); /* get kernel image header, start address and length */ diff --git a/lib_m68k/bootm.c b/lib_m68k/bootm.c index a73f6eb..c52dd2f 100644 --- a/lib_m68k/bootm.c +++ b/lib_m68k/bootm.c @@ -43,22 +43,10 @@ DECLARE_GLOBAL_DATA_PTR; static ulong get_sp (void); static void set_clocks_in_mhz (bd_t *kbd); -int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +void arch_lmb_reserve(struct lmb *lmb) { ulong sp; - ulong rd_len; - ulong initrd_start, initrd_end; - int ret; - - ulong cmd_start, cmd_end; - ulong bootmap_base; - bd_t *kbd; - void (*kernel) (bd_t *, ulong, ulong, ulong, ulong); - struct lmb *lmb = &images->lmb; - - bootmap_base = getenv_bootm_low(); - /* * Booting a (Linux) kernel image * @@ -74,6 +62,21 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) /* adjust sp by 1K to be safe */ sp -= 1024; lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp)); +} + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + ulong rd_len; + ulong initrd_start, initrd_end; + int ret; + + ulong cmd_start, cmd_end; + ulong bootmap_base; + bd_t *kbd; + void (*kernel) (bd_t *, ulong, ulong, ulong, ulong); + struct lmb *lmb = &images->lmb; + + bootmap_base = getenv_bootm_low(); /* allocate space and init command line */ ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end, bootmap_base); diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c index d498818..1f3501a 100644 --- a/lib_ppc/bootm.c +++ b/lib_ppc/bootm.c @@ -55,30 +55,10 @@ static void set_clocks_in_mhz (bd_t *kbd); #define CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE (768*1024*1024) #endif -__attribute__((noinline)) -int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +void arch_lmb_reserve(struct lmb *lmb) { - ulong sp; - - ulong initrd_start, initrd_end; - ulong rd_len; - ulong size; phys_size_t bootm_size; - - ulong cmd_start, cmd_end, bootmap_base; - bd_t *kbd; - void (*kernel)(bd_t *, ulong r4, ulong r5, ulong r6, - ulong r7, ulong r8, ulong r9); - int ret; - ulong of_size = images->ft_len; - struct lmb *lmb = &images->lmb; - -#if defined(CONFIG_OF_LIBFDT) - char *of_flat_tree = images->ft_addr; -#endif - - kernel = (void (*)(bd_t *, ulong, ulong, ulong, - ulong, ulong, ulong))images->ep; + ulong size, sp, bootmap_base; bootmap_base = getenv_bootm_low(); bootm_size = getenv_bootm_size(); @@ -116,6 +96,32 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) sp -= 1024; lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp)); + return ; +} + +__attribute__((noinline)) +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + ulong initrd_start, initrd_end; + ulong rd_len; + + ulong cmd_start, cmd_end, bootmap_base; + bd_t *kbd; + void (*kernel)(bd_t *, ulong r4, ulong r5, ulong r6, + ulong r7, ulong r8, ulong r9); + int ret; + ulong of_size = images->ft_len; + struct lmb *lmb = &images->lmb; + +#if defined(CONFIG_OF_LIBFDT) + char *of_flat_tree = images->ft_addr; +#endif + + kernel = (void (*)(bd_t *, ulong, ulong, ulong, + ulong, ulong, ulong))images->ep; + + bootmap_base = getenv_bootm_low(); + if (!of_size) { /* allocate space and init command line */ ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end, bootmap_base); diff --git a/lib_sparc/bootm.c b/lib_sparc/bootm.c index 2baafcc..565b41c 100644 --- a/lib_sparc/bootm.c +++ b/lib_sparc/bootm.c @@ -81,6 +81,15 @@ struct __attribute__ ((packed)) { /* temporary initrd image holder */ image_header_t ihdr; +void arch_lmb_reserve(struct lmb *lmb) +{ + /* Reserve the space used by PROM and stack. This is done + * to avoid that the RAM image is copied over stack or + * PROM. + */ + lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END); +} + /* boot the linux kernel */ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images) { @@ -124,13 +133,6 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images) rd_len = images->rd_end - images->rd_start; if (rd_len) { - - /* Reserve the space used by PROM and stack. This is done - * to avoid that the RAM image is copied over stack or - * PROM. - */ - lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END); - ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, &initrd_start, &initrd_end); if (ret) { -- 1.5.5.1

2 1

[U-Boot] SPAM:General Dentists Contact List for the USA
by factious 17 Oct '08

17 Oct '08

Enhance your marketing efforts with this: ++> 164,965 D e ntists ++> 158,009 Addresses ++> 163,881 Contact Phone # ++> 77,490 Faxes ++> 45,822 Contact emails during this week only this can be yours for just $290 (usually $598) To inquire please write to ElmaHickey(a)dynamedkey.com to adjust your subscription status email to unlisted99(a)dynamedkey.com

1 0

[U-Boot] [PATCH 0/4] Convert MPC85xx platforms to a single linker script
by Trent Piepho 17 Oct '08

17 Oct '08

This patch series does $SUBJ. The first patch changes the way the existing linker scripts locate the boot page, reset vector, and bss section. This method works for any size of u-boot image (the previous one didn't work images that weren't 512K) and any location flash is mapped to. At this point all the mpc85xx linker scripts are exactly the same, except for one line that defines the flash bank size, so they are combined into one script in cpu/mpc85xx/u-boot.lds. A common flash bank size that will work for all boards is used. If a board in the future needs something different (either very small flash or a very large u-boot), then it can easily be overridden by using a two line board/*/config.mk file that defines the flash bank size and then includes cpu/mpc85xx/u-boot.lds. The next two patches clean up the common boot script some more. I imagine there is more cruft in the script still, like the .data.init and .text.init sections that are 256 byte aligned but have nothing in them.

2 23

[U-Boot] Dentist.s Directory for the United States
by dirac 17 Oct '08

17 Oct '08

Enhance your marketing efforts with this: <> 164,618 D e ntists <> 158,590 Business Addresses <> 163,422 Business Contact Numbers <> 77,746 Business Fax # <> 45,688 Contact emails Only until Oct 17 a special price reduction is in effect - REG PRICE: $599 SALE PRICE: $297 For details please send an email to CaroleLynch(a)mdprolists.com Send us an email to delstop(a)mdprolists.com we will discontinue from the list

1 0

[U-Boot] [POWERPC] mgcoge: Second Flash on CS5 not on CS1
by Heiko Schocher 17 Oct '08

17 Oct '08

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- board/keymile/mgcoge/mgcoge.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 099e77b..5931f17 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -334,7 +334,7 @@ void ft_blob_update (void *blob, bd_t *bd) /* update Flash addr, size */ flash_data[2] = cpu_to_be32 (CFG_FLASH_BASE); flash_data[3] = cpu_to_be32 (CFG_FLASH_SIZE); - flash_data[4] = cpu_to_be32 (1); + flash_data[4] = cpu_to_be32 (5); flash_data[5] = cpu_to_be32 (0); flash_data[6] = cpu_to_be32 (CFG_FLASH_BASE_1); flash_data[7] = cpu_to_be32 (CFG_FLASH_SIZE_1); -- 1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [POWERPC] mgcoge: correct init of the UPIOx
by Heiko Schocher 17 Oct '08

17 Oct '08

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- board/keymile/mgcoge/mgcoge.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 31703ab..099e77b 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -296,7 +296,7 @@ int board_early_init_r (void) { /* setup the UPIOx */ *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0; - *(char *)(CFG_PIGGY_BASE + 0x03) = 0x15; + *(char *)(CFG_PIGGY_BASE + 0x03) = 0x35; return 0; } -- 1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1

[U-Boot] [POWERPC] mgcoge: added CONFIG_FIT to support the new u-boot image format
by Heiko Schocher 17 Oct '08

17 Oct '08

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/mgcoge.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index ecf93e9..10da6b6 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -386,6 +386,7 @@ #define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* pass open firmware flat tree */ +#define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -- 1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

2 1