October 2008 - U-Boot

[U-Boot] [PATCH 04/13 v4] ARM: OMAP3: Add ARM Cortex A8 common directory
by dirk.behme＠googlemail.com 26 Oct '08

26 Oct '08

From: Dirk Behme <dirk.behme(a)gmail.com> Add ARM Cortex A8 common directory Signed-off-by: Dirk Behme <dirk.behme(a)gmail.com> --- cpu/arm_cortexa8/Makefile | 43 +++ cpu/arm_cortexa8/config.mk | 36 +++ cpu/arm_cortexa8/cpu.c | 221 +++++++++++++++++++ cpu/arm_cortexa8/start.S | 522 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 822 insertions(+) Index: u-boot-arm/cpu/arm_cortexa8/cpu.c =================================================================== --- /dev/null +++ u-boot-arm/cpu/arm_cortexa8/cpu.c @@ -0,0 +1,221 @@ +/* + * (C) Copyright 2008 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger(a)sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include <common.h> +#include <command.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + +#ifndef CONFIG_L2_OFF +void l2cache_disable(void); +#endif + +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1(void) +{ + unsigned long value; + + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 0\ + @ read control reg\n":"=r"(value) + ::"memory"); + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1(unsigned long value) +{ + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 0\ + @ write it back\n"::"r"(value) + : "memory"); + + read_p15_c1(); +} + +static void cp_delay(void) +{ + volatile int i; + + /* Many OMAP regs need at least 2 nops */ + for (i = 0; i < 100; i++) ; +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1<<0) /* mmu off/on */ +#define C1_ALIGN (1<<1) /* alignment faults off/on */ +#define C1_DC (1<<2) /* dcache off/on */ +#define C1_WB (1<<3) /* merging write buffer on/off */ +#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ +#define C1_SYS_PROT (1<<8) /* system protection */ +#define C1_ROM_PROT (1<<9) /* ROM protection */ +#define C1_IC (1<<12) /* icache off/on */ +#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ +#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ + +int cpu_init(void) +{ + /* + * setup up stacks if necessary + */ +#ifdef CONFIG_USE_IRQ + IRQ_STACK_START = + _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4; + FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; +#endif + return 0; +} + +int cleanup_before_linux(void) +{ + unsigned int i; + + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + disable_interrupts(); + + /* turn off I/D-cache */ + asm("mrc p15, 0, %0, c1, c0, 0":"=r"(i)); + i &= ~(C1_DC | C1_IC); + asm("mcr p15, 0, %0, c1, c0, 0": :"r"(i)); + + /* invalidate I-cache */ + arm_cache_flush(); +#ifndef CONFIG_L2_OFF + /* turn off L2 cache */ + l2cache_disable(); + /* invalidate L2 cache also */ + v7_flush_dcache_all(get_device_type()); +#endif + i = 0; + /* mem barrier to sync up things */ + asm("mcr p15, 0, %0, c7, c10, 4": :"r"(i)); + +#ifndef CONFIG_L2_OFF + l2cache_enable(); +#endif + + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + disable_interrupts(); + reset_cpu(0); + + /* NOTREACHED */ + return 0; +} + +void icache_enable(void) +{ + ulong reg; + + reg = read_p15_c1(); /* get control reg. */ + cp_delay(); + write_p15_c1(reg | C1_IC); +} + +void icache_disable(void) +{ + ulong reg; + + reg = read_p15_c1(); + cp_delay(); + write_p15_c1(reg & ~C1_IC); +} + +void l2cache_enable() +{ + unsigned long i; + volatile unsigned int j; + + /* ES2 onwards we can disable/enable L2 ourselves */ + if (get_cpu_rev() == CPU_3430_ES2) { + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x2":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + } else { + /* Save r0, r12 and restore them after usage */ + __asm__ __volatile__("mov %0, r12":"=r"(j)); + __asm__ __volatile__("mov %0, r0":"=r"(i)); + + /* GP Device ROM code API usage here */ + /* r12 = AUXCR Write function and r0 value */ + __asm__ __volatile__("mov r12, #0x3"); + __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); + __asm__ __volatile__("orr r0, r0, #0x2"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + __asm__ __volatile__("mov r0, %0":"=r"(i)); + __asm__ __volatile__("mov r12, %0":"=r"(j)); + } + +} + +void l2cache_disable() +{ + unsigned long i; + volatile unsigned int j; + + /* ES2 onwards we can disable/enable L2 ourselves */ + if (get_cpu_rev() == CPU_3430_ES2) { + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("bic %0, %0, #0x2":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + } else { + /* Save r0, r12 and restore them after usage */ + __asm__ __volatile__("mov %0, r12":"=r"(j)); + __asm__ __volatile__("mov %0, r0":"=r"(i)); + + /* GP Device ROM code API usage here */ + /* r12 = AUXCR Write function and r0 value */ + __asm__ __volatile__("mov r12, #0x3"); + __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); + __asm__ __volatile__("bic r0, r0, #0x2"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + __asm__ __volatile__("mov r0, %0":"=r"(i)); + __asm__ __volatile__("mov r12, %0":"=r"(j)); + } +} + +int icache_status(void) +{ + return (read_p15_c1() & C1_IC) != 0; +} Index: u-boot-arm/cpu/arm_cortexa8/Makefile =================================================================== --- /dev/null +++ u-boot-arm/cpu/arm_cortexa8/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START := start.o +OBJS := cpu.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### \ No newline at end of file Index: u-boot-arm/cpu/arm_cortexa8/config.mk =================================================================== --- /dev/null +++ u-boot-arm/cpu/arm_cortexa8/config.mk @@ -0,0 +1,36 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj(a)denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_CPPFLAGS +=$(call cc-option) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\ + $(call cc-option,-malignment-traps,)) \ No newline at end of file Index: u-boot-arm/cpu/arm_cortexa8/start.S =================================================================== --- /dev/null +++ u-boot-arm/cpu/arm_cortexa8/start.S @@ -0,0 +1,522 @@ +/* + * armboot - Startup Code for OMAP3530/ARM Cortex CPU-core + * + * Copyright (c) 2004 Texas Instruments <r-woodruff2(a)ti.com> + * + * Copyright (c) 2001 Marius Gröger <mag(a)sysgo.de> + * Copyright (c) 2002 Alex Züpke <azu(a)sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <gj(a)denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2(a)ti.com> + * Copyright (c) 2003 Kshitij <kshitij(a)ti.com> + * Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim(a)ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +.global _end_vect +_end_vect: + + .balignl 16,0xdeadbeef +/************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + *************************************************************************/ + +_TEXT_BASE: + .word TEXT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0,cpsr + bic r0,r0,#0x1f + orr r0,r0,#0xd3 + msr cpsr,r0 + +#if (CONFIG_OMAP34XX) + /* Copy vectors to mask ROM indirect addr */ + adr r0, _start @ r0 <- current position of code + add r0, r0, #4 @ skip reset vector + mov r2, #64 @ r2 <- size to copy + add r2, r0, r2 @ r2 <- source end address + mov r1, #SRAM_OFFSET0 @ build vect addr + mov r3, #SRAM_OFFSET1 + add r1, r1, r3 + mov r3, #SRAM_OFFSET2 + add r1, r1, r3 +next: + ldmia r0!, {r3-r10} @ copy from source address [r0] + stmia r1!, {r3-r10} @ copy to target address [r1] + cmp r0, r2 @ until source end address [r2] + bne next @ loop until equal */ +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) + /* No need to copy/exec the clock code - DPLL adjust already done + * in NAND/oneNAND Boot. + */ + bl cpy_clk_code @ put dpll adjust code behind vectors +#endif /* NAND Boot */ +#endif + /* the mask ROM code should have PLL and others stable */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + bl cpu_init_crit +#endif + +#ifndef CONFIG_SKIP_RELOCATE_UBOOT +relocate: @ relocate U-Boot to RAM + adr r0, _start @ r0 <- current position of code + ldr r1, _TEXT_BASE @ test if we run from flash or RAM + cmp r0, r1 @ don't reloc during debug + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 @ r2 <- size of armboot + add r2, r0, r2 @ r2 <- source end address + +copy_loop: @ copy 32 bytes at a time + ldmia r0!, {r3-r10} @ copy from source address [r0] + stmia r1!, {r3-r10} @ copy to target address [r1] + cmp r0, r2 @ until source end addreee [r2] + ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ +stack_setup: + ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot + sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area + sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo +#ifdef CONFIG_USE_IRQ + sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) +#endif + sub sp, r0, #12 @ leave 3 words for abort-stack + and sp, sp, #~7 @ 8 byte alinged for (ldr/str)d + + /* Clear BSS (if any). Is below tx (watch load addr - need space) */ +clear_bss: + ldr r0, _bss_start @ find start of bss segment + ldr r1, _bss_end @ stop here + mov r2, #0x00000000 @ clear value +clbss_l: + str r2, [r0] @ clear BSS location + cmp r0, r1 @ are we at the end yet + add r0, r0, #4 @ increment clear index pointer + bne clbss_l @ keep clearing till at end + + ldr pc, _start_armboot @ jump to C code + +_start_armboot: .word start_armboot + + +/************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + *************************************************************************/ +cpu_init_crit: + /* + * Invalidate L1 I/D + */ + mov r0, #0 @ set up for MCR + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002000 @ clear bits 13 (--V-) + bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) + orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align + orr r0, r0, #0x00000800 @ set bit 12 (Z---) BTB + mcr p15, 0, r0, c1, c0, 0 + + /* + * Jump to board specific initialization... + * The Mask ROM will have already initialized + * basic memory. Go here to bump up clock rate and handle + * wake up conditions. + */ + mov ip, lr @ persevere link reg across call + bl lowlevel_init @ go setup pll,mux,memory + mov lr, ip @ restore link + mov pc, lr @ back to my caller +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current + @ user stack + stmia sp, {r0 - r12} @ Save user registers (now in + @ svc mode) r0-r12 + + ldr r2, _armboot_start + sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) + sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort + @ stack + ldmia r2, {r2 - r3} @ get values for "aborted" pc + @ and cpsr (into parm regs) + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 + @ (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC @ !! R8 NEEDS to be saved !! + @ a reserved stack spot would + @ be good. + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into + @ cpsr + .endm + + .macro get_bad_stack + ldr r13, _armboot_start @ setup our mode stack (enter + @ in banked mode) + sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple + @ spots for abort stack + + str lr, [r13] @ save caller lr in position 0 + @ of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of + @ saved stack + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure + @ moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & + @ switch modes. + .endm + + .macro get_bad_stack_swi + sub r13, r13, #4 @ space on current stack for + @ scratch reg. + str r0, [r13] @ save R0's value. + ldr r0, _armboot_start @ get data regions start + sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move past gbl and a couple + @ spots for abort stack + str lr, [r0] @ save caller lr in position 0 + @ of saved stack + mrs r0, spsr @ get the spsr + str lr, [r0, #4] @ save spsr in position 1 of + @ saved stack + ldr r0, [r13] @ restore r0 + add r13, r13, #4 @ pop stack entry + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effiction fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif + .align 5 +.global arm_cache_flush +arm_cache_flush: + mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache + mov pc, lr @ back to caller + +/* + * v7_flush_dcache_all() + * + * Flush the whole D-cache. + * + * Corrupted registers: r0-r5, r7, r9-r11 + * + * - mm - mm_struct describing address space + */ + .align 5 +.global v7_flush_dcache_all +v7_flush_dcache_all: + stmfd r13!, {r0-r5, r7, r9-r12,r14} + + mov r7, r0 @ take a backup of device type + cmp r0, #0x3 @ check if the device type is + @ GP + moveq r12, #0x1 @ set up to invalide L2 +smi: .word 0x01600070 @ Call SMI monitor (smieq) + cmp r7, #0x3 @ compare again in case its + @ lost + beq finished_inval @ if GP device, inval done + @ above + + mrc p15, 1, r0, c0, c0, 1 @ read clidr + ands r3, r0, #0x7000000 @ extract loc from clidr + mov r3, r3, lsr #23 @ left align loc bit field + beq finished_inval @ if loc is 0, then no need to + @ clean + mov r10, #0 @ start clean at cache level 0 +inval_loop1: + add r2, r10, r10, lsr #1 @ work out 3x current cache + @ level + mov r1, r0, lsr r2 @ extract cache type bits from + @ clidr + and r1, r1, #7 @ mask of the bits for current + @ cache only + cmp r1, #2 @ see what cache we have at + @ this level + blt skip_inval @ skip if no cache, or just + @ i-cache + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mov r2, #0 @ operand for mcr SBZ + mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to + @ sych the new cssr&csidr, + @ with armv7 this is 'isb', + @ but we compile with armv5 + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + and r2, r1, #7 @ extract the length of the + @ cache lines + add r2, r2, #4 @ add 4 (line length offset) + ldr r4, =0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the + @ way size + clz r5, r4 @ find bit position of way + @ size increment + ldr r7, =0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the + @ index size +inval_loop2: + mov r9, r4 @ create working copy of max + @ way size +inval_loop3: + orr r11, r10, r9, lsl r5 @ factor way and cache number + @ into r11 + orr r11, r11, r7, lsl r2 @ factor index number into r11 + mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way + subs r9, r9, #1 @ decrement the way + bge inval_loop3 + subs r7, r7, #1 @ decrement the index + bge inval_loop2 +skip_inval: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt inval_loop1 +finished_inval: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer, + @ with armv7 this is 'isb', + @ but we compile with armv5 + + ldmfd r13!, {r0-r5, r7, r9-r12,pc} + + + .align 5 +.global reset_cpu +reset_cpu: + ldr r1, rstctl @ get addr for global reset + @ reg + mov r3, #0x2 @ full reset pll + mpu + str r3, [r1] @ force reset + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PRM_RSTCTRL +

2 1

[U-Boot] NET: Updated SMSC LAN9x1x EEPROM program?
by Magnus Lilja 26 Oct '08

26 Oct '08

Hi Is there an up to date smsc9111x_eeprom.c floating around somewhere? I found Mike Frysinger's post from March '08 but it needs updating to compile and work with current mainline U-boot, has anyone already done this? Thanks, Magnus

2 1

[U-Boot] |>entists Directory in the US
by Kathrine brandy 26 Oct '08

26 Oct '08

Just Released: D.entistry Contact List in America <> 164,557 D.entists <> 158,280 Postal Addresses <> 163,348 Business Contact Numbers <> 77,933 Office Fax Numbers <> 45,221 e mails Only until Oct 24 you won't pay the regular $593 price, you get it for $290 For details please send an email to qbofzysx(a)easymedcontact.com to get off please email expell(a)consultmed.cn

1 0

[U-Boot] [PATCH] 86xx: Move the clear_tlbs before MMU turn on
by Dave Liu 25 Oct '08

25 Oct '08

We must invalidate TLBs before MMU turn on, but currently the code is not, if there are some stale TLB entry valid in the TLBs, it will cause strange issue. Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- cpu/mpc86xx/start.S | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 159f3e1..30e6047 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -202,8 +202,12 @@ boot_warm: mtmsr 0 #endif + /* Invalidate BATs */ bl invalidate_bats sync + /* Invalidate all of TLB before MMU turn on */ + bl clear_tlbs + sync #ifdef CONFIG_SYS_L2 /* init the L2 cache */ @@ -275,7 +279,6 @@ in_flash: /* setup the rest of the bats */ bl setup_bats - bl clear_tlbs sync #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) -- 1.5.4

1 0

[U-Boot] [PATCH] ppc4xx: Correctly configure the GPIO pin muxing on Arches
by Stefan Roese 25 Oct '08

25 Oct '08

Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO pin multiplexing correctly Signed-off-by: Stefan Roese <sr(a)denx.de> --- include/configs/canyonlands.h | 12 +++++++++++- 1 files changed, 11 insertions(+), 1 deletions(-) diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index ec08ba7..f8e8801 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -571,6 +571,16 @@ #define CONFIG_SYS_EBC_CFG 0xB8400000 /* EBC0_CFG */ /* + * Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO + * pin multiplexing correctly + */ +#if defined(CONFIG_ARCHES) +#define GPIO43_USE GPIO_SEL /* On Arches this pin is used as GPIO */ +#else +#define GPIO43_USE GPIO_ALT1 /* On Glacier this pin is used as ALT1 -> PerCS3 */ +#endif + +/* * PPC4xx GPIO Configuration */ #ifdef CONFIG_460EX @@ -698,7 +708,7 @@ {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \ {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \ {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO43_USE, GPIO_OUT_0},/* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \ {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \ {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \ {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \ -- 1.6.0.3

1 0

[U-Boot] [PATCH 00/10] 85xx/85xx pci cleanup
by Kumar Gala 25 Oct '08

25 Oct '08

This patch series adds the ability to support 64-bit PCI addresses as well as refactors the fsl_pci_init code and cleans up its users. Finally it adds some help functions that the board code calls to set dma-ranges in device trees. If the particular maintainers could ack the patches that would be great (Andy, Jon, Jerry). - k

5 19

[U-Boot] [PATCH] NAND: Reset chip on power-up
by Scott Wood 24 Oct '08

24 Oct '08

From: Karl Beldan <karl.beldan(a)gmail.com> Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx). The first command sent is NAND_CMD_READID. Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id. Tested with an MT29F4G08AAC. Signed-off-by: Karl Beldan <karl.beldan(a)gmail.com> Signed-off-by: Scott Wood <scottwood(a)freescale.com> --- Applied to u-boot-nand-flash drivers/mtd/nand/nand_base.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4069ab1..ba05b76 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2450,6 +2450,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, /* Select the device */ chip->select_chip(mtd, 0); + /* + * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) + * after power-up + */ + chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); @@ -2620,6 +2626,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips) /* Check for a chip array */ for (i = 1; i < maxchips; i++) { chip->select_chip(mtd, i); + /* See comment in nand_get_flash_type for reset */ + chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ -- 1.5.6.rc1.6.gc53ad

1 0

[U-Boot] [PATCH] NAND: sync with 2.6.27
by Scott Wood 24 Oct '08

24 Oct '08

This brings the core NAND code up to date with the Linux kernel. Since there were several drivers in Linux as of the last update that are not in u-boot, I'm not bringing over new drivers that have been added since in the absence of an interested party. I did not update OneNAND since it was recently synced by Kyungmin Park, and I'm not sure exactly what the common ancestor is. Signed-off-by: Scott Wood <scottwood(a)freescale.com> --- Applied to u-boot-nand-flash drivers/mtd/nand/diskonchip.c | 43 +++++------- drivers/mtd/nand/nand_base.c | 127 +++++++++++++++++++++++++++++++++-- drivers/mtd/nand/nand_bbt.c | 2 - drivers/mtd/nand/nand_ecc.c | 7 +- drivers/mtd/nand/nand_ids.c | 3 +- drivers/mtd/onenand/onenand_base.c | 2 +- include/linux/mtd/blktrans.h | 2 - include/linux/mtd/doc2000.h | 2 - include/linux/mtd/mtd.h | 32 +++++++-- include/linux/mtd/nand.h | 12 +++- include/linux/mtd/nand_ecc.h | 2 - include/linux/mtd/nftl.h | 7 ++- include/linux/mtd/onenand.h | 1 + include/linux/mtd/onenand_regs.h | 6 ++ 14 files changed, 188 insertions(+), 60 deletions(-) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 4cba810..e9dc4d1 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -15,8 +15,6 @@ * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx(a)linutronix.de> * * Interface to generic NAND code for M-Systems DiskOnChip devices - * - * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $ */ #include <common.h> @@ -58,13 +56,6 @@ static unsigned long __initdata doc_locations[] = { 0xe0000, 0xe2000, 0xe4000, 0xe6000, 0xe8000, 0xea000, 0xec000, 0xee000, #endif /* CONFIG_MTD_DOCPROBE_HIGH */ -#elif defined(__PPC__) - 0xe4000000, -#elif defined(CONFIG_MOMENCO_OCELOT) - 0x2f000000, - 0xff000000, -#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) - 0xff000000, #else #warning Unknown architecture for DiskOnChip. No default probe locations defined #endif @@ -229,7 +220,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) } } /* If the parity is wrong, no rescue possible */ - return parity ? -1 : nerr; + return parity ? -EBADMSG : nerr; } static void DoC_Delay(struct doc_priv *doc, unsigned short cycles) @@ -1044,7 +1035,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); else WriteDOC(DOC_ECC_DIS, docptr, ECCConf); - if (no_ecc_failures && (ret == -1)) { + if (no_ecc_failures && (ret == -EBADMSG)) { printk(KERN_ERR "suppressing ECC failure\n"); ret = 0; } @@ -1139,9 +1130,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio goto out; mh = (struct NFTLMediaHeader *)buf; - mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); - mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); - mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + le16_to_cpus(&mh->NumEraseUnits); + le16_to_cpus(&mh->FirstPhysicalEUN); + le32_to_cpus(&mh->FormattedSize); printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" @@ -1249,12 +1240,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); mh = (struct INFTLMediaHeader *)buf; - mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); - mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); - mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); - mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); - mh->FormatFlags = le32_to_cpu(mh->FormatFlags); - mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + le32_to_cpus(&mh->NoOfBootImageBlocks); + le32_to_cpus(&mh->NoOfBinaryPartitions); + le32_to_cpus(&mh->NoOfBDTLPartitions); + le32_to_cpus(&mh->BlockMultiplierBits); + le32_to_cpus(&mh->FormatFlags); + le32_to_cpus(&mh->PercentUsed); printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" @@ -1291,12 +1282,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti /* Scan the partitions */ for (i = 0; (i < 4); i++) { ip = &(mh->Partitions[i]); - ip->virtualUnits = le32_to_cpu(ip->virtualUnits); - ip->firstUnit = le32_to_cpu(ip->firstUnit); - ip->lastUnit = le32_to_cpu(ip->lastUnit); - ip->flags = le32_to_cpu(ip->flags); - ip->spareUnits = le32_to_cpu(ip->spareUnits); - ip->Reserved0 = le32_to_cpu(ip->Reserved0); + le32_to_cpus(&ip->virtualUnits); + le32_to_cpus(&ip->firstUnit); + le32_to_cpus(&ip->lastUnit); + le32_to_cpus(&ip->flags); + le32_to_cpus(&ip->spareUnits); + le32_to_cpus(&ip->Reserved0); printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index fe34a48..4069ab1 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -7,7 +7,7 @@ * Basic support for AG-AND chips is provided. * * Additional technical information is available on - * http://www.linux-mtd.infradead.org/tech/nand.html + * http://www.linux-mtd.infradead.org/doc/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill(a)realitydiluted.com) * 2002-2006 Thomas Gleixner (tglx(a)linutronix.de) @@ -24,6 +24,7 @@ * if we have HW ecc support. * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. + * BBT table is not serialized, has to be fixed * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -128,7 +129,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, static int nand_wait(struct mtd_info *mtd, struct nand_chip *this); /* - * For devices which display every fart in the system on a seperate LED. Is + * For devices which display every fart in the system on a separate LED. Is * compiled away when LED support is disabled. */ /* XXX U-BOOT XXX */ @@ -412,6 +413,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* We write two bytes, so we dont have to mess with 16 bit * access */ + nand_get_device(chip, mtd, FL_WRITING); ofs += mtd->oobsize; chip->ops.len = chip->ops.ooblen = 2; chip->ops.datbuf = NULL; @@ -419,9 +421,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->ops.ooboffs = chip->badblockpos & ~0x01; ret = nand_do_write_oob(mtd, ofs, &chip->ops); + nand_release_device(mtd); } if (!ret) mtd->ecc_stats.badblocks++; + return ret; } @@ -911,7 +915,88 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat == -1) + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + +/** + * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @dataofs offset of requested data within the page + * @readlen data length + * @buf: buffer to store read data + */ +static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) +{ + int start_step, end_step, num_steps; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *p; + int data_col_addr, i, gaps = 0; + int datafrag_len, eccfrag_len, aligned_len, aligned_pos; + int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; + + /* Column address wihin the page aligned to ECC size (256bytes). */ + start_step = data_offs / chip->ecc.size; + end_step = (data_offs + readlen - 1) / chip->ecc.size; + num_steps = end_step - start_step + 1; + + /* Data size aligned to ECC ecc.size*/ + datafrag_len = num_steps * chip->ecc.size; + eccfrag_len = num_steps * chip->ecc.bytes; + + data_col_addr = start_step * chip->ecc.size; + /* If we read not a page aligned data */ + if (data_col_addr != 0) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); + + p = bufpoi + data_col_addr; + chip->read_buf(mtd, p, datafrag_len); + + /* Calculate ECC */ + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) + chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); + + /* The performance is faster if to position offsets + according to ecc.pos. Let make sure here that + there are no gaps in ecc positions */ + for (i = 0; i < eccfrag_len - 1; i++) { + if (eccpos[i + start_step * chip->ecc.bytes] + 1 != + eccpos[i + start_step * chip->ecc.bytes + 1]) { + gaps = 1; + break; + } + } + if (gaps) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + } else { + /* send the command to read the particular ecc bytes */ + /* take care about buswidth alignment in read_buf */ + aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1); + aligned_len = eccfrag_len; + if (eccpos[start_step * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1); + chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); + } + + for (i = 0; i < eccfrag_len; i++) + chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]]; + + p = bufpoi + data_col_addr; + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { + int stat; + + stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -996,7 +1081,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, oob, eccbytes); stat = chip->ecc.correct(mtd, p, oob, NULL); - if (stat == -1) + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -1116,6 +1201,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); + else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) + ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else ret = chip->ecc.read_page(mtd, chip, bufpoi); if (ret < 0) @@ -1123,7 +1210,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Transfer not aligned data */ if (!aligned) { - chip->pagebuf = realpage; + if (!NAND_SUBPAGE_READ(chip) && !oob) + chip->pagebuf = realpage; memcpy(buf, chip->buffers->databuf + col, bytes); } @@ -2193,13 +2281,14 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, erase_exit: ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; - /* Do call back function */ - if (!ret) - mtd_erase_callback(instr); /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + /* * If BBT requires refresh and erase was successful, rewrite any * selected bad block tables @@ -2356,6 +2445,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, { struct nand_flash_dev *type = NULL; int i, dev_id, maf_idx; + int tmp_id, tmp_manf; /* Select the device */ chip->select_chip(mtd, 0); @@ -2367,6 +2457,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, *maf_id = chip->read_byte(mtd); dev_id = chip->read_byte(mtd); + /* Try again to make sure, as some systems the bus-hold or other + * interface concerns can cause random data which looks like a + * possibly credible NAND flash to appear. If the two results do + * not match, ignore the device completely. + */ + + chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); + + /* Read manufacturer and device IDs */ + + tmp_manf = chip->read_byte(mtd); + tmp_id = chip->read_byte(mtd); + + if (tmp_manf != *maf_id || tmp_id != dev_id) { + printk(KERN_INFO "%s: second ID read did not match " + "%02x,%02x against %02x,%02x\n", __func__, + *maf_id, dev_id, tmp_manf, tmp_id); + return ERR_PTR(-ENODEV); + } + /* Lookup the flash id */ for (i = 0; nand_flash_ids[i].name != NULL; i++) { if (dev_id == nand_flash_ids[i].id) { @@ -2630,6 +2740,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.calculate = nand_calculate_ecc; chip->ecc.correct = nand_correct_data; chip->ecc.read_page = nand_read_page_swecc; + chip->ecc.read_subpage = nand_read_subpage; chip->ecc.write_page = nand_write_page_swecc; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index b3b740d..d68a315 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -6,8 +6,6 @@ * * Copyright (C) 2004 Thomas Gleixner (tglx(a)linutronix.de) * - * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index ee1f6cc..94923b9 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -9,8 +9,6 @@ * * Copyright (C) 2006 Thomas Gleixner <tglx(a)linutronix.de> * - * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $ - * * This file is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 or (at your option) any @@ -47,7 +45,8 @@ #include <linux/mtd/nand_ecc.h> #endif -#include<linux/mtd/mtd.h> +#include <asm/errno.h> +#include <linux/mtd/mtd.h> /* * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(), @@ -206,7 +205,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat, if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) return 1; - return -1; + return -EBADMSG; } /* XXX U-BOOT XXX */ diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 2ff75c9..077c305 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -3,8 +3,6 @@ * * Copyright (C) 2002 Thomas Gleixner (tglx(a)linutronix.de) * - * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -142,5 +140,6 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_STMICRO, "ST Micro"}, {NAND_MFR_HYNIX, "Hynix"}, {NAND_MFR_MICRON, "Micron"}, + {NAND_MFR_AMD, "AMD"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index c22a8a8..9b7bf3a 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1428,7 +1428,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", - (unsigned int)instr->addr, (unsigned int)ins tr->len); + (unsigned int)instr->addr, (unsigned int)instr->len); block_size = (1 << this->erase_shift); diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index d1ded51..32acb6c 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -1,6 +1,4 @@ /* - * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $ - * * (C) 2003 David Woodhouse <dwmw2(a)infradead.org> * * Interface to Linux block layer for MTD 'translation layers'. diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h index 12de284..ba29d53 100644 --- a/include/linux/mtd/doc2000.h +++ b/include/linux/mtd/doc2000.h @@ -6,8 +6,6 @@ * Copyright (C) 2002-2003 Greg Ungerer <gerg(a)snapgear.com> * Copyright (C) 2002-2003 SnapGear Inc * - * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $ - * * Released under GPL */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 55d33dd..354e3a0 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -1,6 +1,4 @@ /* - * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $ - * * Copyright (C) 1999-2003 David Woodhouse <dwmw2(a)infradead.org> et al. * * Released under GPL @@ -132,7 +130,7 @@ struct mtd_info { u_int32_t oobavail; /* Available OOB bytes per block */ /* Kernel-only stuff starts here. */ - char *name; + const char *name; int index; /* ecc layout structure pointer - read only ! */ @@ -144,18 +142,36 @@ struct mtd_info { int numeraseregions; struct mtd_erase_region_info *eraseregions; + /* + * Erase is an asynchronous operation. Device drivers are supposed + * to call instr->callback() whenever the operation completes, even + * if it completes with a failure. + * Callers are supposed to pass a callback function and wait for it + * to be called before writing to the block. + */ int (*erase) (struct mtd_info *mtd, struct erase_info *instr); /* This stuff for eXecute-In-Place */ - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); + /* phys is optional and may be set to NULL */ + int (*point) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, phys_addr_t *phys); /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ - void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); + void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + /* In blackbox flight recorder like scenarios we want to make successful + writes in interrupt context. panic_write() is only intended to be + called when its known the kernel is about to panic and we need the + write to succeed. Since the kernel is not going to be running for much + longer, this function can break locks and delay to ensure the write + succeeds (but not sleep). */ + + int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + int (*read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); int (*write_oob) (struct mtd_info *mtd, loff_t to, @@ -274,7 +290,11 @@ static inline void mtd_erase_callback(struct erase_info *instr) printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ -#define MTDDEBUG(n, args...) do { } while(0) +#define MTDDEBUG(n, args...) \ + do { \ + if (0) \ + printk(KERN_INFO args); \ + } while(0) #endif /* CONFIG_MTD_DEBUG */ #endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7ac72de..39f8aec 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1,12 +1,10 @@ /* * linux/include/linux/mtd/nand.h * - * Copyright (c) 2000 David Woodhouse <dwmw2(a)mvhi.com> + * Copyright (c) 2000 David Woodhouse <dwmw2(a)infradead.org> * Steven J. Hill <sjhill(a)realitydiluted.com> * Thomas Gleixner <tglx(a)linutronix.de> * - * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -190,6 +188,9 @@ typedef enum { #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) +/* Large page NAND with SOFT_ECC should support subpage reads */ +#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \ + && (chip->page_shift > 9)) /* Mask to zero out the chip options, which come from the id table */ #define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) @@ -278,6 +279,10 @@ struct nand_ecc_ctrl { int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf); + int (*read_subpage)(struct mtd_info *mtd, + struct nand_chip *chip, + uint32_t offs, uint32_t len, + uint8_t *buf); void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf); @@ -435,6 +440,7 @@ struct nand_chip { #define NAND_MFR_STMICRO 0x20 #define NAND_MFR_HYNIX 0xad #define NAND_MFR_MICRON 0x2c +#define NAND_MFR_AMD 0x01 /** * struct nand_flash_dev - NAND Flash Device ID Structure diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h index 12c5bc3..090da50 100644 --- a/include/linux/mtd/nand_ecc.h +++ b/include/linux/mtd/nand_ecc.h @@ -3,8 +3,6 @@ * * Copyright (C) 2000 Steven J. Hill (sjhill(a)realitydiluted.com) * - * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h index 6731a16..fe22e0d 100644 --- a/include/linux/mtd/nftl.h +++ b/include/linux/mtd/nftl.h @@ -1,6 +1,4 @@ /* - * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $ - * * (C) 1999-2003 David Woodhouse <dwmw2(a)infradead.org> */ @@ -43,6 +41,11 @@ struct NFTLrecord { int NFTL_mount(struct NFTLrecord *s); int NFTL_formatblock(struct NFTLrecord *s, int block); +int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + #ifndef NFTL_MAJOR #define NFTL_MAJOR 93 #endif diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 420eb14..4467c2b 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -51,6 +51,7 @@ struct onenand_bufferram { * @param page_shift [INTERN] number of address bits in a page * @param ppb_shift [INTERN] number of address bits in a pages per block * @param page_mask [INTERN] a page per block mask + * @param writesize [INTERN] a real page size * @param bufferam_index [INTERN] BufferRAM index * @param bufferam [INTERN] BufferRAM info * @param readw [REPLACEABLE] hardware specific function for read short diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 6a8aa28..a245e14 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -67,12 +67,16 @@ /* * Device ID Register F001h (R) */ +#define ONENAND_DEVICE_DENSITY_MASK (0xf) #define ONENAND_DEVICE_DENSITY_SHIFT (4) #define ONENAND_DEVICE_IS_DDP (1 << 3) #define ONENAND_DEVICE_IS_DEMUX (1 << 2) #define ONENAND_DEVICE_VCC_MASK (0x3) #define ONENAND_DEVICE_DENSITY_512Mb (0x002) +#define ONENAND_DEVICE_DENSITY_1Gb (0x003) +#define ONENAND_DEVICE_DENSITY_2Gb (0x004) +#define ONENAND_DEVICE_DENSITY_4Gb (0x005) /* * Version ID Register F002h (R) @@ -110,6 +114,8 @@ #define ONENAND_CMD_READOOB (0x13) #define ONENAND_CMD_PROG (0x80) #define ONENAND_CMD_PROGOOB (0x1A) +#define ONENAND_CMD_2X_PROG (0x7D) +#define ONENAND_CMD_2X_CACHE_PROG (0x7F) #define ONENAND_CMD_UNLOCK (0x23) #define ONENAND_CMD_LOCK (0x2A) #define ONENAND_CMD_LOCK_TIGHT (0x2C) -- 1.5.6.rc1.6.gc53ad

1 0

[U-Boot] [PATCH] 85xx: Fix the incorrect register used for DDR erratum1
by Dave Liu 24 Oct '08

24 Oct '08

The 8572 DDR erratum1: DDR controller may enter an illegal state when operating in 32-bit bus mode with 4-beat bursts. Description: When operating with a 32-bit bus, it is recommended that DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used. This forces the DDR controller to use 4-beat bursts when communicating to the DRAMs. However, an issue exists that could lead to data corruption when the DDR controller is in 32-bit bus mode while using 4-beat bursts. Projected Impact: If the DDR controller is operating in 32-bit bus mode with 4-beat bursts, then the controller may enter into a bad state. All subsequent reads from memory is corrupted. Four-beat bursts with a 32-bit bus only is used with DDR2 memories. Therefore, this erratum does not affect DDR3 mode. Work Arounds: To work around this issue, software must set DEBUG_1[31] in DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1 and CCSRBAR offset + 0x6f00 for DDR_2). Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2 as condition, but it should be DDR_SDRAM_CFG register. Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- cpu/mpc85xx/ddr-gen3.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-) diff --git a/cpu/mpc85xx/ddr-gen3.c b/cpu/mpc85xx/ddr-gen3.c index e0654bb..a2b45c5 100644 --- a/cpu/mpc85xx/ddr-gen3.c +++ b/cpu/mpc85xx/ddr-gen3.c @@ -79,15 +79,18 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); /* - * 32-bit workaround for DDR2 - * 32_BE + * For 8572 DDR1 erratum - DDR controller may enter illegal state + * when operatiing in 32-bit bus mode with 4-beat bursts, + * This erratum does not affect DDR3 mode, only for DDR2 mode. */ +#ifdef CONFIG_MPC8572 if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2) - && in_be32(&ddr->sdram_cfg_2) & 0x80000) { + && in_be32(&ddr->sdram_cfg) & 0x80000) { /* set DEBUG_1[31] */ u32 temp = in_be32(&ddr->debug_1); out_be32(&ddr->debug_1, temp | 1); } +#endif /* * 200 painful micro-seconds must elapse between -- 1.5.4

2 1

[U-Boot] [PATCH] 85xx: remove unused config definition
by Dave Liu 24 Oct '08

24 Oct '08

Signed-off-by: Dave Liu <daveliu(a)freescale.com> --- include/configs/MPC8536DS.h | 8 -------- include/configs/MPC8572DS.h | 10 ---------- 2 files changed, 0 insertions(+), 18 deletions(-) diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 38be10d..dbddb63 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -134,14 +134,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 #define CONFIG_SYS_DDR_SBE 0x00010000 -/* FIXME: Not used in fixed_sdram function */ -#define CONFIG_SYS_DDR_MODE 0x00000022 -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */ - /* Make sure required options are set */ #ifndef CONFIG_SPD_EEPROM #error ("CONFIG_SPD_EEPROM is required") diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 5688589..66e07eb 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -135,16 +135,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_DDR_SBE 0x00010000 /* - * FIXME: Not used in fixed_sdram function - */ -#define CONFIG_SYS_DDR_MODE 0x00000022 -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */ -#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */ - -/* * Make sure required options are set */ #ifndef CONFIG_SPD_EEPROM -- 1.5.4

2 1