April 2007 - U-Boot

[U-Boot-Users] [PATCH 4/5] 86xx : Adjust multi I2C bus stuff
by Sam Song 05 Apr '07

05 Apr '07

This patch enables multi I2C bus stuff for MPC8641HPCN. ___________________________________________________________ Mp3疯狂搜-新歌热歌高速下 http://music.yahoo.com.cn/?source=mail_mailbox_footer

1 0

[U-Boot-Users] [PATCH 3/5] 86xx : Add CFG_FLASH_USE_BUFFER_WRITE
by Sam Song 05 Apr '07

05 Apr '07

This patch adds CFG_FLASH_USE_BUFFER_WRITE/CFG_FLASH_QUIET_TEST/ CONFIG_CMDLINE_EDITING for MPC8641HPCN. ___________________________________________________________ 雅虎免费邮箱-3.5G容量，20M附件 http://cn.mail.yahoo.com/

1 0

[U-Boot-Users] [PATCH 2/5] 86xx : Fix PCI config_table mismatch in mpc8641hpcn.c
by Sam Song 05 Apr '07

05 Apr '07

This patch fix config_table mismatch. ___________________________________________________________ Mp3疯狂搜-新歌热歌高速下 http://music.yahoo.com.cn/?source=mail_mailbox_footer

1 0

[U-Boot-Users] [PATCH 1/5] 86xx : Remove compiling warnings with ELDK4.0/4.1.
by Sam Song 05 Apr '07

05 Apr '07

This patch fixes compiling warnings with ELDK4.0/4.1 toolchain. ___________________________________________________________ 雅虎免费邮箱-3.5G容量，20M附件 http://cn.mail.yahoo.com/

1 0

[U-Boot-Users] MPC8641HPCN patchset - 07/04/05
by Sam Song 05 Apr '07

05 Apr '07

Hello Jon, This reference board(Rev1.02) has been here with me nearly two weeks and helped a lot on our custmoized 8641D target debug. Frankly speaking, it took no more than 10-hour to port minimal u-boot and minimal kenel on our 14-layer target - amazing speed I had never got. Thanks for all your pioneers nice/hard work. All submitted patches later were against the official git tree 5 days ago and confirmed on the reference board. Hope it could be helpful. Sam ___________________________________________________________ Mp3疯狂搜-新歌热歌高速下 http://music.yahoo.com.cn/?source=mail_mailbox_footer

1 0

Re: [U-Boot-Users] u-boot maintainer for scb9328 board
by Peter Pearse 05 Apr '07

05 Apr '07

> -----Original Message----- > From: Andrew Dyer [mailto:amdyer@gmail.com] > Sent: 04 April 2007 16:54 > To: Konstantin Kletschke; Peter Pearse > Subject: Re: u-boot maintainer for scb9328 board > > On 4/4/07, Konstantin Kletschke <kletschke(a)synertronixx.de> wrote: > > > added to the MAINTAINERS file. Is the offer to maintain still > > > valid? > > > > Yes it is. I did the initial Prot with Saschahauer but he left our > > company after that (after doing good work) and since than I handle > > them in daily work and are actually maintaining them, but only > > locally. > > Konsti, I am forwarding this to Peter also, since he is the > ARM custodian now. Peter, could you add Konsti as the > maintainer of scb9328? > On my list ..... Peter

1 0

[U-Boot-Users] PATCH add SMN42 board from Siemens
by Gary Jennejohn 05 Apr '07

05 Apr '07

This patch supersedes all others. Not a lot has changed relative to the last patch. The patch can be downloaded from: ftp://ftp.denx.de/pub/patches/SMN42_20070404 The patch is against a u-boot tree checked out on Tuesday (April 3) at 14:35 (GMT+1). Changes: 1) add cpu/arm720t/lpc2292 and include/asm-arm/arch-lpc2292 with files common to ports for the LPC2292. 2) move board/lpc2292sodimm/eth.c to drivers/enc28j60.c. CONFIG_ENC28J60 controls its use. It also includes errata fixes obtained from Siemens. 3) patches to the lpc2292sodimm port reflecting (1) and (2). 4) add board/siemens/SMN42. ``MAKEALL ARM7'' shows no regressions. The patch deletes these files: board/lpc2292sodimm/eth.c board/lpc2292sodimm/iap_entry.S board/lpc2292sodimm/mmc.c board/lpc2292sodimm/mmc_hw.c board/lpc2292sodimm/mmc_hw.h board/lpc2292sodimm/spi.c board/lpc2292sodimm/spi.h include/asm-arm/arch-arm720t/lpc2292_registers.h include/asm-arm/arch-arm720t/mmc.h and adds these files: boot/board/siemens/SMN42/config.mk boot/board/siemens/SMN42/flash.c boot/board/siemens/SMN42/lowlevel_init.S boot/board/siemens/SMN42/Makefile boot/board/siemens/SMN42/smn42.c boot/board/siemens/SMN42/u-boot.lds cpu/arm720t/lpc2292/flash.c cpu/arm720t/lpc2292/iap_entry.S cpu/arm720t/lpc2292/Makefile cpu/arm720t/lpc2292/mmc.c cpu/arm720t/lpc2292/mmc_hw.c cpu/arm720t/lpc2292/mmc_hw.h cpu/arm720t/lpc2292/spi.c drivers/enc28j60.c include/asm-arm/arch-lpc2292/hardware.h include/asm-arm/arch-lpc2292/lpc2292_registers.h include/asm-arm/arch-lpc2292/mmc.h include/asm-arm/arch-lpc2292/spi.h Signed-off-by: Gary Jennejohn <garyj(a)denx.de> -- Gary Jennejohn / garyjATjennejohnDOTorg gjATfreebsdDOTorg garyjATdenxDOTde ===================================================================== DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany =====================================================================

1 0

[U-Boot-Users] Using CONFIG_OF_LIBFDT
by Jerry Van Baren 05 Apr '07

05 Apr '07

I've added the following Important Safety Tips to the u-boot-fdt status page <http://www.denx.de/wiki/UBoot/UBootFdtInfo> based on feedback from Jon Diekema (thanks, Jon): * Need to use the latest device tree compiler (dtc) to generate a Version 17 blob * libfdt needs V17 in order to write to the blob * Need to specify a size with fdt addr * By default, the blob has the minimum necessary size for its compiled content. This means there is no room to add a "chosen" (or other) node. * Using CONFIG_OF_LIBFDT modifies bootm so that it does not auto-generate nodes ("chosen", "u-boot-env", and "bd_t") when it runs. With CONFIG_OF_LIBFDT, the boot script or the user must use the sequence: * fdt addr command to set the blob address * fdt chosen to generate/augment the chosen node * fdt env to generate the u-boot-env node (optional) * fdt bd_t to generate the bd_t node (optional) Bear with me, we'll get this smoothed out... gvb

1 0

[U-Boot-Users] need a complete step by step way to create a patch specifically for u-boot
by james pruett 05 Apr '07

05 Apr '07

Q: How do I make a patch? I know the basics, but I just cant get it solid! It keeps finding reverse-patches when I test it. I need a complete step by step for u-boot specific. Heres my guess which doesn't work. Thanks for helping -jd ls u-boot_1.1.3 u-boot_1.1.3new rm -rf `find u-boot_1.1.3new -name \*.a` rm -rf `find u-boot_1.1.3new -name u-boot` rm -rf `find u-boot_1.1.3new -name \*.srec` rm -rf `find u-boot_1.1.3new -name \*map` rm -f u-boot_1.1.3/include/asm diff -pNaur u-boot_1.1.3 u-boot_1.1.3new > patch.patch cd u-boot_1.1.3 patch -p1 < ../patch.patch

3 2

[U-Boot-Users] Please pull u-boot-mpc86xx.git
by Jon Loeliger 04 Apr '07

04 Apr '07

Wolfgang, The following changes since commit aea17f99278818caa327ad0e511b48d1761fb10c: Wolfgang Denk (1): Merge with /home/hs/TQ/u-boot are found in the git repository at: git://www.denx.de/git/u-boot-mpc86xx.git Ed Swarthout (1): Add support for 8641 Rev 2 silicon. Haiying Wang (1): Set Rev 2.x 86xx PIC in mixed mode. Jason Jin (1): Add flash cmd function to 8641HPCN ramboot Jon Loeliger (1): Fix 8641HPCN problem with ld version 2.16 board/mpc8641hpcn/u-boot.lds | 2 ++ cpu/mpc86xx/interrupts.c | 20 ++++++++++++++++++++ cpu/mpc86xx/spd_sdram.c | 4 ++-- include/asm-ppc/immap_86xx.h | 2 ++ include/configs/MPC8641HPCN.h | 16 +++------------- 5 files changed, 29 insertions(+), 15 deletions(-)

2 5