April 2007 - U-Boot

[U-Boot-Users] [RFC] CFG_CMD bits
by Peter Pearse 03 Apr '07

03 Apr '07

Dear list I see there remains only one CFG_CMD bit 0x8000000000000000ULL. Was there some previous discussion on how to expand the list of commands? I can't find anything on http://blog.gmane.org/gmane.comp.boot-loaders.u-boot Perhaps someone can remind me of the full topic(s) and/or conclusions reached. Regards Peter

1 0

[U-Boot-Users] [PATCH] PXA27x USB (new) OHCI support
by Rodolfo Giometti 03 Apr '07

03 Apr '07

PXA: pxa27x USB OHCI support Signed-off-by: Rodolfo Giometti <giometti(a)linux.it> ---

2 4

Re: [U-Boot-Users] [PATCH] ISP116x HCD (Host Controller Driver)
by Markus Klotzbücher 03 Apr '07

03 Apr '07

Dear Rodolfo, Rodolfo Giometti <giometti(a)enneenne.com> writes: > Support for the Philips ISP116x HCD (Host Controller Driver). > > Signed-off-by: Rodolfo Giometti <giometti(a)enneenne.com> Applied to U-Boot custodian repository, thanks. Best regards Markus Klotzbuecher -- DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany

1 0

[U-Boot-Users] configure to run a xipImage
by Joakim Nordell 03 Apr '07

03 Apr '07

Hello! I would like to run a xipImage. I'm sure I have to tell u-boot that this is the case, but how? For the moment I have an xipImage that prints "Magic Bad Number" when I try to start it. Greetings --- Joakim Nordell

2 1

[U-Boot-Users] Is there a way to get total time passed since boot in U-Boot?
by vinay hegde 03 Apr '07

03 Apr '07

Hi All, I am working on MPC8548 U-Boot. Here, I have a requirement where I need to get the total number of millisecs/secs elapsed since the boot (similar to what jiffies do in linux). Please let me know if there is a way to get this in U-Boot code? Thanks muchly, Vinay ____________________________________________________________________________________ Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. http://tools.search.yahoo.com/toolbar/features/mail/

2 1

[U-Boot-Users] Help Needed...
by Deepak $ehrawat 03 Apr '07

03 Apr '07

Hi all, I am trying to port u-boot on a board based on MPC8560. I am using TRACE32 as a simulator ( and ICD ). In case of my board, CCSRBAR = 0xA000_0000 and there is no memory attached at 0XFF70_0000 ( i.e at default CCSRBAR address ). During simulation I observed that in file "cpu/mpc85xx/start.S" ( line - 276 onwards ), it tries to modify old CCSRBAR value the with new one. But as there is no memory at default CCSRBAR address (0xFF70_0000) , will it work in real senario ? ( i.e when i will run this code on the actual card ). Am I missing something? Do i need to change the value of CFG_CCSRBAR_DEFAULT to such a location on my board where some memory exists. During simulation, while stepping through U-Boot's code (e.g in file cpu/mpc85xx/start.S ), values of the registers like CCSRBAR, LAWs etc are not changing. What should I do? Do help me...its pretty urgent. Thanks in advance Regards, Deepak

1 0

[U-Boot-Users] configuration file
by Saiful Khan 03 Apr '07

03 Apr '07

Hello, I have a winriver sbc7447 board. i want to put u-boot, I look at the Marvell-64360 board, is almost similar to my board. Now I am writing the include/configs/sbc7447.h file, using include/configs/DB64360.h as a reference. can you please tell me what are the main thing I need to concentrate on and how to do the memorymap part? Thanks and regards Saiful

1 0

[U-Boot-Users] If you did not use virtual forms here, you could not submit this page, because the Key text field is required (as indicated by the asterisk).
by Herbert O. Joyner 03 Apr '07

03 Apr '07

RuntimePermission "accessDeclaredMembers"; permission java. That takes care of the setup. Type images in the Folder Name text box and press Enter. Now let's add some dependencies showing the actor - system interaction. setAttribute( ImageServlet. Yes this applies to Java Studio Creator 2 Update 1 as well. ) For more information about this optional patch, see the FAQ Daylight Saving Time (DST) has changed in the U. You might need to add additional libraries to use more advanced features. home property to point to the folder into which you unpacked the JasperReports zip file. If you are using a different version than 1. In the Files window, expand TravelReport, and double-click build. Use the Java Powered brand to build customer confidence and create product demand and awareness. Don't see a tutorial that suits your needs? 2em; padding-left: 1. Shifting From VB to Java Technology You presented a session on the Sun Java Studio Creator 2 IDE at the 2006 JavaOne Conference. You can configure your IDE to use both servers and use the one that works best for the project at hand. In the Properties window, set the id property to viewReportBtn. How do I patch the JDK bundled with Creator, so time calculations are correct? Figure 8: Page1 Display Page1 in the Visual Designer. However, some people do not have machines with enough memory to handle both the IDE and the Application Server and report sluggishness. The "Web Services" node in the "Servers" window shows the IDE-scoped web services. Just look at the widespread use of Java applications. User1 will then have to do a CVS "update". NET developer can grasp Java tools much more comfortably than could developers in 1995. Note: The examples in this tutorial use JasperReports 1. The documentation page also includes important blog entries, webinars, and other types of content you may find useful. jar These are the minimum libraries that you need for a web application that uses the JasperReports framework. Figure 3: NetBeans 5. jar, is required by the JasperReports compiler. My table has 2 row groups: the first is to display 4 columns of a ObjectListDataProvider, plus a checkBox to select and delete with a button un the upper facet. Next, add a property of type boolean called "textFieldDisabled". Preferences Page After clicking the Set Preferences button you are redirected to the Preferences page. Figure 8: Page1 Display Page1 in the Visual Designer. Stay tuned for the next wave of innovation, such as the upcoming Visual Web Pack, new fast 6. Java technology performance in game development has advanced. The first hit is "Deployment Example: Tomcat". Back to top Prerequisites To succeed fully in this course, students should be able to demonstrate familiarity with the basics of Java technology and web architecture. If you drill down on the tableColumn1 component in the Results table on the Search page, you see that it contains a hyperlink component which has a static text component as a child component. And the new Jackpot project offers a nice rule-based approach to transforming source code. NAME to the top of the list.

1 0

[U-Boot-Users] U-boot for MTD partition
by harsh poshtiwala 02 Apr '07

02 Apr '07

Hi Friends I need to make MTD partition followed by JFFS2 file system on 32 MB NOR flash of one of the ARM926-ejs based board.I am using linux kerenel version 2.6. I didn't get information about 1,How can i create MTD partition ? 2,Do i need to have MTD utilities ? 3,If yes what are the steps to integrate it ? 4,How can i implement JFFS2 on MTD partition? can i achieve above from u-boot promt? I would appreciate your guidence /documentation that shows me entire procedure to get me going on this stuff. -- Thanks & Regards Harsh

2 1

[U-Boot-Users] [PATCH] (ARM-specific) Allow use of arm-linux-gcc built with NWFPE emulation to compile U-Boot
by Ulf Samuelsson 02 Apr '07

02 Apr '07

Author: Ulf Samuelsson Date: 2007-03-27 Description: Change "-msoftfloat" to $(SOFTFLOAT) for arm920t arm926ejs This allows an arm toolchain using floating point emulation for these cores to build u-boot. When -msoftfloat is present as a flag to arm-linux-gcc, the build fails. The default operation is to keep -msoftfloat but if CONFIG_NOSOFTFLOAT is defined as an environment variable in the shell, the -msoftfloat is removed during the build Example: $ export CONFIG_NOSOFTFLOAT=y $ make <board>_config $ make Signed-off-by: Ulf Samuelsson diff -urN u-boot-2007-03-26/config.mk u-boot-2007-03-26-atmel/config.mk --- u-boot-2007-03-26/config.mk 2007-03-26 22:52:54.000000000 +0200 +++ u-boot-2007-03-26-atmel/config.mk 2007-03-26 22:54:03.000000000 +0200 @@ -73,6 +73,12 @@ PLATFORM_CPPFLAGS+= -D__BLACKFIN__ endif +ifeq ($(CONFIG_NOSOFTFLOAT),) +SOFTFLOAT = -msoft-float +else +SOFTFLOAT = +endif + ifdef ARCH sinclude $(TOPDIR)/$(ARCH)_config.mk # include architecture dependend rules endif diff -urN u-boot-2007-03-26/cpu/arm920t/config.mk u-boot-2007-03-26-atmel/cpu/arm920t/config.mk --- u-boot-2007-03-26/cpu/arm920t/config.mk 2007-03-26 22:52:54.000000000 +0200 +++ u-boot-2007-03-26-atmel/cpu/arm920t/config.mk 2007-03-26 22:54:03.000000000 +0200 @@ -22,7 +22,7 @@ # PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ - -msoft-float + $(SOFTFLOAT) PLATFORM_CPPFLAGS += -march=armv4 # ========================================================================= diff -urN u-boot-2007-03-26/cpu/arm926ejs/config.mk u-boot-2007-03-26-atmel/cpu/arm926ejs/config.mk --- u-boot-2007-03-26/cpu/arm926ejs/config.mk 2007-03-26 22:52:54.000000000 +0200 +++ u-boot-2007-03-26-atmel/cpu/arm926ejs/config.mk 2007-03-26 22:54:03.000000000 +0200 @@ -22,7 +22,7 @@ # PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ - -msoft-float + $(SOFTFLOAT) PLATFORM_CPPFLAGS += -march=armv4 # ========================================================================= -- Best Regards, Ulf Samuelsson

2 1