November 2007 - U-Boot

[U-Boot-Users] [PATCH] powerpc: Backout relocation changes.
by Grant Likely 17 Nov '07

17 Nov '07

From: Grant Likely <grant.likely(a)secretlab.ca> Ugh. I *hate* to back this change out, but these compiler flags don't work for relocation on all versions of GCC. I've not been able to reproduce the environment in my setup (and hence, not been able to find a combination that *does* work), so I've got no choice but to go back to the old gcc flags and linker script. Signed-off-by: Grant Likely <grant.likely(a)secretlab.ca> --- Wolfgang, I haven't had the opportunity to actually test this, and even if I did I've only got 1 compiler version installed and 2 architectures to test it on. It is possible that it will cause breakage, but it is a straight revert of the original patches so it should be safe. (I recommend testing before the 1.3.0 release is cut) Cheers, g. board/cogent/u-boot.lds | 1 + board/hymod/u-boot.lds | 1 + board/mousse/u-boot.lds | 1 + board/rsdproto/u-boot.lds | 1 + cpu/mpc512x/config.mk | 2 +- cpu/mpc5xx/config.mk | 2 +- cpu/mpc5xx/u-boot.lds | 1 + cpu/mpc5xxx/config.mk | 2 +- cpu/mpc5xxx/u-boot-customlayout.lds | 1 + cpu/mpc5xxx/u-boot.lds | 1 + cpu/mpc8220/config.mk | 2 +- cpu/mpc8220/u-boot.lds | 1 + cpu/mpc824x/config.mk | 2 +- cpu/mpc824x/u-boot.lds | 1 + cpu/mpc8260/config.mk | 2 +- cpu/mpc8260/u-boot.lds | 1 + cpu/mpc83xx/config.mk | 2 +- cpu/mpc83xx/u-boot.lds | 1 + include/common.h | 8 -------- 19 files changed, 18 insertions(+), 15 deletions(-) diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds index d87a39b..5ce2694 100644 --- a/board/cogent/u-boot.lds +++ b/board/cogent/u-boot.lds @@ -55,6 +55,7 @@ SECTIONS { *(.text) common/environment.o(.text) + *(.fixup) *(.got1) } _etext = .; diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds index 9bf0f09..337a395 100644 --- a/board/hymod/u-boot.lds +++ b/board/hymod/u-boot.lds @@ -69,6 +69,7 @@ SECTIONS common/environment.o(.text) *(.text) + *(.fixup) *(.got1) } _etext = .; diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds index eb4d8e4..57358b8 100644 --- a/board/mousse/u-boot.lds +++ b/board/mousse/u-boot.lds @@ -60,6 +60,7 @@ SECTIONS lib_generic/crc32.o (.text) lib_generic/zlib.o (.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds index 9bd6248..70fc3a5 100644 --- a/board/rsdproto/u-boot.lds +++ b/board/rsdproto/u-boot.lds @@ -55,6 +55,7 @@ SECTIONS { cpu/mpc8260/start.o (.text) *(.text) + *(.fixup) *(.got1) /*. = env_offset; */ } diff --git a/cpu/mpc512x/config.mk b/cpu/mpc512x/config.mk index 3259d53..8a07c5a 100644 --- a/cpu/mpc512x/config.mk +++ b/cpu/mpc512x/config.mk @@ -19,7 +19,7 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \ -ffixed-r2 -ffixed-r29 -msoft-float -mcpu=603e diff --git a/cpu/mpc5xx/config.mk b/cpu/mpc5xx/config.mk index e95b8a1..64cd600 100644 --- a/cpu/mpc5xx/config.mk +++ b/cpu/mpc5xx/config.mk @@ -28,7 +28,7 @@ # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -ffixed-r29 -mpowerpc -msoft-float diff --git a/cpu/mpc5xx/u-boot.lds b/cpu/mpc5xx/u-boot.lds index 10001b1..5b03fef 100644 --- a/cpu/mpc5xx/u-boot.lds +++ b/cpu/mpc5xx/u-boot.lds @@ -59,6 +59,7 @@ SECTIONS cpu/mpc5xx/start.o (.text) *(.text) + *(.fixup) *(.got1) } _etext = .; diff --git a/cpu/mpc5xxx/config.mk b/cpu/mpc5xxx/config.mk index 0e861c4..0df51ba 100644 --- a/cpu/mpc5xxx/config.mk +++ b/cpu/mpc5xxx/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 -ffixed-r29 \ -mstring -mcpu=603e -mmultiple diff --git a/cpu/mpc5xxx/u-boot-customlayout.lds b/cpu/mpc5xxx/u-boot-customlayout.lds index 1107943..123a14c 100644 --- a/cpu/mpc5xxx/u-boot-customlayout.lds +++ b/cpu/mpc5xxx/u-boot-customlayout.lds @@ -66,6 +66,7 @@ SECTIONS common/environment.o (.ppcenv) *(.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/cpu/mpc5xxx/u-boot.lds b/cpu/mpc5xxx/u-boot.lds index a28a3af..78818a4 100644 --- a/cpu/mpc5xxx/u-boot.lds +++ b/cpu/mpc5xxx/u-boot.lds @@ -55,6 +55,7 @@ SECTIONS { cpu/mpc5xxx/start.o (.text) *(.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/cpu/mpc8220/config.mk b/cpu/mpc8220/config.mk index c41cafe..8e3ba54 100644 --- a/cpu/mpc8220/config.mk +++ b/cpu/mpc8220/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 -ffixed-r29 \ -mstring -mcpu=603e -mmultiple diff --git a/cpu/mpc8220/u-boot.lds b/cpu/mpc8220/u-boot.lds index a199a64..889bc77 100644 --- a/cpu/mpc8220/u-boot.lds +++ b/cpu/mpc8220/u-boot.lds @@ -55,6 +55,7 @@ SECTIONS { cpu/mpc8220/start.o (.text) *(.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/cpu/mpc824x/config.mk b/cpu/mpc824x/config.mk index 17fdb21..66207f4 100644 --- a/cpu/mpc824x/config.mk +++ b/cpu/mpc824x/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -msoft-float diff --git a/cpu/mpc824x/u-boot.lds b/cpu/mpc824x/u-boot.lds index 8cbef4a..c90d1e9 100644 --- a/cpu/mpc824x/u-boot.lds +++ b/cpu/mpc824x/u-boot.lds @@ -55,6 +55,7 @@ SECTIONS { cpu/mpc824x/start.o (.text) *(.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/cpu/mpc8260/config.mk b/cpu/mpc8260/config.mk index d401e4c..683b6fb 100644 --- a/cpu/mpc8260/config.mk +++ b/cpu/mpc8260/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 -ffixed-r29 \ -mstring -mcpu=603e -mmultiple diff --git a/cpu/mpc8260/u-boot.lds b/cpu/mpc8260/u-boot.lds index b8abc17..3e84f23 100644 --- a/cpu/mpc8260/u-boot.lds +++ b/cpu/mpc8260/u-boot.lds @@ -55,6 +55,7 @@ SECTIONS { cpu/mpc8260/start.o (.text) *(.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/cpu/mpc83xx/config.mk b/cpu/mpc83xx/config.mk index 2ec395d..ecf8a60 100644 --- a/cpu/mpc83xx/config.mk +++ b/cpu/mpc83xx/config.mk @@ -20,7 +20,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -mrelocatable +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC83XX -DCONFIG_E300 \ -ffixed-r2 -ffixed-r29 -msoft-float diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds index ca663bc..937c87a 100644 --- a/cpu/mpc83xx/u-boot.lds +++ b/cpu/mpc83xx/u-boot.lds @@ -52,6 +52,7 @@ SECTIONS { cpu/mpc83xx/start.o (.text) *(.text) + *(.fixup) *(.got1) . = ALIGN(16); *(.rodata) diff --git a/include/common.h b/include/common.h index aca281b..63ac8b0 100644 --- a/include/common.h +++ b/include/common.h @@ -63,19 +63,13 @@ typedef volatile unsigned char vu_char; #endif #elif defined(CONFIG_5xx) #include <asm/5xx_immap.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC5xxx) #include <mpc5xxx.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC512X) #include <mpc512x.h> #include <asm/immap_512x.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC8220) #include <asm/immap_8220.h> -#define CONFIG_RELOC_FIXUP_WORKS -#elif defined(CONFIG_824X) -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -87,7 +81,6 @@ typedef volatile unsigned char vu_char; #define CONFIG_MPC8260 1 #endif #include <asm/immap_8260.h> -#define CONFIG_RELOC_FIXUP_WORKS #endif #ifdef CONFIG_MPC86xx #include <mpc86xx.h> @@ -100,7 +93,6 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_MPC83XX #include <mpc83xx.h> #include <asm/immap_83xx.h> -#define CONFIG_RELOC_FIXUP_WORKS #endif #ifdef CONFIG_4xx #include <ppc4xx.h>

4 4

[U-Boot-Users] [PATCH] Fixed mips_io_port_base build errors.
by Jean-Christophe PLAGNIOL-VILLARD 17 Nov '07

17 Nov '07

This patch has been sent on: - 29 Sep 2007 Although mips_io_port_base is currently a part of IDE command, it is quite fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move it to MIPS general part, and introduce `set_io_port_base()' from Linux. This patch is triggered by multiple definition of `mips_io_port_base' build error on gth2 (and tb0229 also needs this fix.) board/gth2/libgth2.a(gth2.o): In function `log_serial_char': /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here make: *** [u-boot] Error 1 Signed-off-by: Shinya Kuribayashi <skuribay(a)ruby.dti.ne.jp> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c index d29e8d5..a13eeeb 100644 --- a/board/dbau1x00/dbau1x00.c +++ b/board/dbau1x00/dbau1x00.c @@ -25,6 +25,7 @@ #include <command.h> #include <asm/au1x00.h> #include <asm/mipsregs.h> +#include <asm/io.h> long int initdram(int board_type) { @@ -77,6 +78,9 @@ int checkboard (void) default: printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } + + set_io_port_base(0); + #ifdef CONFIG_IDE_PCMCIA /* Enable 3.3 V on slot 0 ( VCC ) No 5V */ diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c index ffeaf58..1593f02 100644 --- a/board/gth2/gth2.c +++ b/board/gth2/gth2.c @@ -26,14 +26,13 @@ #include <asm/au1x00.h> #include <asm/addrspace.h> #include <asm/mipsregs.h> +#include <asm/io.h> #include <watchdog.h> #include "ee_access.h" static int wdi_status = 0; -unsigned long mips_io_port_base = 0; - #define SDRAM_SIZE ((64*1024*1024)-(12*4096)) @@ -147,6 +146,9 @@ int checkboard (void) default: printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } + + set_io_port_base(0); + #ifdef CONFIG_IDE_PCMCIA /* PCMCIA is on a 36 bit physical address. We need to map it into a 32 bit addresses */ diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c index b5d9e00..dbf0ecc 100644 --- a/board/incaip/incaip.c +++ b/board/incaip/incaip.c @@ -25,7 +25,7 @@ #include <command.h> #include <asm/addrspace.h> #include <asm/inca-ip.h> - +#include <asm/io.h> extern uint incaip_get_cpuclk(void); @@ -85,7 +85,6 @@ long int initdram(int board_type) int checkboard (void) { - unsigned long chipid = *INCA_IP_WDT_CHIPID; int part_num; @@ -107,5 +106,7 @@ int checkboard (void) printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000); + set_io_port_base(0); + return 0; } diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c index 40ac2a4..95b7d82 100644 --- a/board/pb1x00/pb1x00.c +++ b/board/pb1x00/pb1x00.c @@ -25,6 +25,7 @@ #include <command.h> #include <asm/au1x00.h> #include <asm/mipsregs.h> +#include <asm/io.h> long int initdram(int board_type) { @@ -69,6 +70,9 @@ int checkboard (void) default: printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } + + set_io_port_base(0); + #if defined(CONFIG_IDE_PCMCIA) && 0 /* Enable 3.3 V on slot 0 ( VCC ) No 5V */ diff --git a/board/purple/purple.c b/board/purple/purple.c index 4c3e5b4..74718af 100644 --- a/board/purple/purple.c +++ b/board/purple/purple.c @@ -26,6 +26,7 @@ #include <asm/inca-ip.h> #include <asm/regdef.h> #include <asm/mipsregs.h> +#include <asm/io.h> #include <asm/addrspace.h> #include <asm/cacheops.h> @@ -145,6 +146,8 @@ int checkboard (void) printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000); + set_io_port_base(0); + return 0; } diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c index e7914bd..61c2e9b 100644 --- a/board/tb0229/tb0229.c +++ b/board/tb0229/tb0229.c @@ -13,10 +13,9 @@ #include <command.h> #include <asm/addrspace.h> #include <asm/inca-ip.h> +#include <asm/io.h> #include <pci.h> -unsigned long mips_io_port_base = 0; - #if defined(CONFIG_PCI) static struct pci_controller hose; @@ -26,17 +25,17 @@ void pci_init_board (void) } #endif - long int initdram(int board_type) { return get_ram_size (CFG_SDRAM_BASE, 0x8000000); } - int checkboard (void) { printf("Board: TANBAC TB0229 "); printf("(CPU Speed %d MHz)\n", (int)CPU_CLOCK_RATE/1000000); + set_io_port_base(0); + return 0; } diff --git a/common/cmd_ide.c b/common/cmd_ide.c index bb064ea..feb89d6 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -54,10 +54,6 @@ #ifndef __PPC__ #include <asm/io.h> -#ifdef __MIPS__ -/* Macros depend on this variable */ -unsigned long mips_io_port_base = 0; -#endif #endif #ifdef CONFIG_IDE_8xx_DIRECT diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index cd4d5dc..1e060f7 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -71,7 +71,21 @@ * instruction, so the lower 16 bits must be zero. Should be true on * on any sane architecture; generic code does not use this assumption. */ -extern unsigned long mips_io_port_base; +extern const unsigned long mips_io_port_base; + +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; +} /* * Thanks to James van Artsdalen for a better timing-fix than diff --git a/lib_mips/board.c b/lib_mips/board.c index 91ccec0..c1a0acf 100644 --- a/lib_mips/board.c +++ b/lib_mips/board.c @@ -62,6 +62,11 @@ static ulong mem_malloc_start; static ulong mem_malloc_end; static ulong mem_malloc_brk; +/* + * mips_io_port_base is the begin of the address space to which x86 style + * I/O ports are mapped. + */ +unsigned long mips_io_port_base = -1; /* * The Malloc area is immediately below the monitor copy in DRAM -- 1.5.3.2

3 2

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
by Stefan Roese 17 Nov '07

17 Nov '07

The following changes since commit 5c568d6a7f950b9e7e32a63a5893f979b8789b4d: Stefan Roese (1): Merge branch 'master' of git://www.denx.de/git/u-boot are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master Stefan Roese (1): ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching board/lwmon5/lwmon5.c | 26 +++++++++++++++++--------- 1 files changed, 17 insertions(+), 9 deletions(-)

2 1

[U-Boot-Users] Pull request for -mpc86xx repository
by Jon Loeliger 17 Nov '07

17 Nov '07

Wolfgang, Please cherry-pick these three commits from the -mpc86xx custodian tree: +* [for-1.3.0] Unify pixis_reset altbank across board families +* [for-1.3.0^] make 8610 board use pixis reset +* [for-1.3.0~2] 86xx: Fix broken variable reference when #def DEBUGing. They have the following SHA1s, respectively: 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56 a8318ec205c8e8794b5f9f1b8584abadb440e8ba 9c84709eedce9c680dd695984ab7d2328f4f04f5 They will need to be cherry-picked in reverse order: First 9c84709, then a8318ec2, finally 9f23ca33. Thank you! jdl

2 1

[U-Boot-Users] [GIT PULL] Please pull net tree
by Ben Warren 16 Nov '07

16 Nov '07

Wolfgang, Please pull the net tree. I believe it's in sync with the main line. P.S. is there a way to get rid of the merge log entries from when I sync with the main line, or do we want them there? The following changes since commit 992742a5b09d9040adbd156fb90756af66ade310: Wolfgang Denk (1): Cleanup coding style; update CHANGELOG are available in the git repository at: git://www.denx.de/git/u-boot-net master Ben Warren (2): Merge git://www.denx.de/git/u-boot Merge git://www.denx.de/git/u-boot Justin Flammia (1): DHCP Client Fix Larry Johnson (2): NET: Cosmetic changes NET: Add Ethernet 1000BASE-X support for PPC4xx Roy Zang (1): Implement general ULi 526x Ethernet driver support in U-boot common/cmd_mii.c | 8 +- common/miiphyutil.c | 282 ++++++++------- drivers/Makefile | 2 +- drivers/uli526x.c | 996 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/miiphy.h | 114 ++++--- net/eth.c | 4 + 6 files changed, 1227 insertions(+), 179 deletions(-) create mode 100644 drivers/uli526x.c

3 2

[U-Boot-Users] EABI Problem
by Russ Ferriday 16 Nov '07

16 Nov '07

Hello all, I'm new here. In reference to this message: http://sourceforge.net/mailarchive/ message.php?msg_name=468E52A8.2040604%40rfo.atmel.com I've been down the same path as Philip and Patrice. Of course when I define 'CFG_NAND_LEGACY', U-Boot> mtdparts returns "support for NAND devices not present'. Is there another flag that I need to define to get a newer version of NAND support working? I'm building for KB9202B. --r Russ Ferriday - Topia Systems - Open Source content management with Plone and Zope russf(a)topia.com - office: +44 2076 1777588 - mobile: +44 7789 338868 - skype: ferriday a member of Zea Partners

5 8

Re: [U-Boot-Users] ignoring bootdelay
by Peter Poulsen 16 Nov '07

16 Nov '07

> Peter Poulsen wrote: >> I'm trying to get my board to boot within 5 seconds. Unfortunately uboot seems to >> be >> ignoring bootdelay, and simply sits there and wait for me to type run jffs2boot. >> Here are my env variables. What am I missing? Thanks in advance. >> <snip> > > Hi Peter, > > as it seems, "jffs2boot" is just set the "bootargs" variable, but > doesn't load any kernel. So either your "bootcmd" is set wrongly or > "jffs2boot" must be extended by some kind of load command and a "bootm" > command. > Thanks a lot for your answer. I think the lines got broken so I have attached a new print. This time there should be no break lines. Btw. run jffs2boot starts fine enough. My problem is that I don't a 5 second time out to automatic startup. /peter

2 1

[U-Boot-Users] What if eth_init() fails?
by Upakul Barkakaty 16 Nov '07

16 Nov '07

Hi all, I observed that when the Ethernet initialization fails, it is not properly halting the operation and exiting. On walking through the Networking files, I saw that the eth_init() in eth.c either returns a 0 or 1. Now, in the NetLoop() in net.c file, from where the eth_init() gets called, checks the condition if (eth_init(bd) < 0) { eth_halt(); return(-1); } which is thus never true. Thus the network operation, never exits gracefully, if Ethernet init fails. Any of you, have any clues about this?? -- View this message in context: http://www.nabble.com/What-if-eth_init%28%29-fails--tf4802433.html#a13740586 Sent from the Uboot - Users mailing list archive at Nabble.com.

6 10

[U-Boot-Users] ignoring bootdelay
by Peter Poulsen 16 Nov '07

16 Nov '07

I'm trying to get my board to boot within 5 seconds. Unfortunately uboot seems to be ignoring bootdelay, and simply sits there and wait for me to type run jffs2boot. Here are my env variables. What am I missing? Thanks in advance. => print ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr baudrate=115200 loads_echo=1 ethaddr=00:e0:5e:00:e5:14 ipaddr=192.168.160.77 serverip=192.168.1.1 preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo rootpath=/tftpboot/rootfs gatewayip=192.168.1.1 netmask=255.255.0.0 hostname=mpc5121ads bootfile=uImage loadaddr=1000000 netdev=eth0 consoledev=ttyPSC0 hostname=mpc5121ads ramargs=setenv bootargs root=/dev/ram rw addip=setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off panic=1 addtty=setenv bootargs $bootargs console=$consoledev,$baudrate flash_self=run ramargs addip addtty;bootm $kernel_addr $ramdiskaddr $fdtaddr load=tftp 100000 /tftpboot/ads5121/u-boot.bin update=protect off fff00000 fff3ffff; era fff00000 fff3ffff; cp.b 100000 fff00000 $filesize upd=run load;run update ramdiskaddr=2000000 ramdiskfile=rootfs.ext2.gz.uboot fdtaddr=3000000 fdtfile=mpc5121ads.dtb ethact=FEC ETHERNET fdtflashaddr=ffec0000 kernelflashaddr=0xffc40000 jffs2boot=setenv bootargs console=$consoledev,$baudrate root=/dev/mtdblock1 rw rootfstype=jffs2 $otherbootargs; bootm $kernelflashaddr - $fdtflashaddr bootcmd=run jffs2boot bootdelay=5 stdin=serial stdout=serial stderr=serial

1 0

[U-Boot-Users] [PATCH] Enable ULi1575 Ethernet support in 8610HPCD config
by Jon Loeliger 16 Nov '07

16 Nov '07

From: Roy Zang <tie-fei.zang(a)freescale.com> Signed-off-by: Roy Zang <tie-fei.zang(a)freescale.com> Acked-by: Jon Loeliger <jdl(a)freescale.com> --- include/configs/MPC8610HPCD.h | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index f5d9c09..ef1310f 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -312,16 +312,16 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_NET_MULTI +#define CONFIG_CMD_NET #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#if 0 /* TODO */ -/* enable onboard uli network support */ -#endif - #define CONFIG_RTL8139 #define CONFIG_SK98 #define CONFIG_EEPRO100 #define CONFIG_TULIP +#ifdef CONFIG_TULIP +#define CONFIG_ETHADDR 00:E0:0C:00:00:01 +#endif /************************************************************ * USB support -- 1.5.3

7 14