July 2006 - U-Boot

Re: [U-Boot-Users] Loadb issue
by Banajit Goswami 19 Jul '06

19 Jul '06

Hi Andreas/All, Thanks for the reply. I am using same baudrate for terminal as well as kermit modes. both are with 115200. I am getting the prompt on console over serial and able to execute commands like help, bdinfo, md and mw etc. I am sending a log herewith with some of the commands' execution as well as the .kermrc file that I am using. Any pointer would be of very much help. Thanks and Regards Banajit Message: 7 Date: Wed, 19 Jul 2006 12:54:46 +0200 From: Andreas Schweigstill <andreas(a)schweigstill.de> Subject: Re: [U-Boot-Users] Loadb issue To: u-boot-users(a)lists.sourceforge.net Message-ID: < 44BE0F76.50208(a)schweigstill.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Dear Banajit! Banajit Goswami schrieb: > Content-Type: text/html; charset=ISO-8859-1 > Content-Transfer-Encoding: 7bit > Content-Disposition: inline Please do not post messages in HTML format to this list. > 3) at u-boot command prompt gave following command > => loadb 0x60008000 115200 > 4) From hyperterminal, Transfer->send file with protocol as kermit, > selected the file and tried sending, but failed. Everytime > hyperterminal poped up "error limit exceeded". Are you sure that you are using the same baudrate for terminal mode and kermit mode? Do the RS232 level converters have their own supply or do they get it from the modem control lines? Although you selected no handshake this doesn't neccessarily mean that the control lines don't get toggled. With best regards Andreas Schweigstill -- Dipl.-Phys. Andreas Schweigstill Schweigstill IT | Embedded Systems Schauenburgerstra?e 116, D-24118 Kiel, Germany Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436 Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/

3 4

[U-Boot-Users] Request nash binary on ppc
by Raja Chidambaram 19 Jul '06

19 Jul '06

Hi all, Please don't consider this to be off topic.I am in need of nash binary compiled on ppc platform for executing linuxrc script.If anyone as static nash binary please send me.sorry for the inconvience.thanks in advance with regards k.raja __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Re: [U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK
by Erdmann, Thomas 19 Jul '06

19 Jul '06

Hello Wolfgang, that Information isn't new so i forgot to answer for this. If i set a #define CONFIG_SKIP_LOWLEVEL_INIT in the include/configs/at91rm9200dk.h ( and appending an #ifdef CONFIG_SKIP_LOWLEVEL_INIT around Function cpu_init_crit: in init.S to avoid an error message )the resulting u-boot.bin is a few Bytes shorter but it doesn't run after load by loader.bin, too. So i thought there must be another Setting, CONFIG_BOOTBINFUNC was another Tip in Mail List but doesn't help too. I started a Request at Atmel, perhaps they will give a Patch or something else. THX for your Help Thomas > -----Ursprüngliche Nachricht----- > Von: wd(a)denx.de [mailto:wd@denx.de] > Gesendet: Mittwoch, 19. Juli 2006 13:56 > An: Erdmann, Thomas > Cc: u-boot-users(a)lists.sourceforge.net > Betreff: Re: AW: [U-Boot-Users] Start with u-boot on > at91rm9200 on AT91RM9200-EK > > In message > <F6726C3E89A64840A5E10310E342A38F01BE93D1(a)xchback01.back.harti > ng.intra> you wrote: > > > > i did read all your replies and didn't ignore them. > > To me it seems you did. For example, I wrote: > > ... but I guess the CONFIG_SKIP_LOWLEVEL_INIT config option > is what you are looking for. Please read the documentation > (README). > > and I see no indication that you did so. > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: > wd(a)denx.de Anarchy may not be the best form of government, > but it's better than no government at all. > >

2 1

[U-Boot-Users] windriver workbench for u-boot development.
by Engin KARABULUT 19 Jul '06

19 Jul '06

hi, we have purchased wind power ICE emulator and windriver workbench ocd 2.4. Now we have problem with debugging uboot's assembly files. The issue is same problem given below. TITLE:When debugging some versions of the Linux u-boot application, the debugger cannot do source level debugging of assembly files. SPR#:112280 DEFECT#:19830 FIX RECORD:19831 FIX RELEASE:Wind River Workbench 2.5 (2006-06-28 00:00:00) STATUS:In Progress PRODUCTS AFFECTED:Wind River Workbench 2.4 DESCRIPTION:When debugging some versions of the Linux u-boot application, the debugger does not perform source level debugging of assembly files. Workbench fails to find the correct assembly source file at the u-boot program entry point. Note that in this scenario, the debugger does not have any problems debugging C source files. The problem is actually due to incorrect u-boot makefile configuration where assembly files are built with the directive -Wa,-gstabs, whereas the C files are built with -gdwarf-2. This results in mixed STABS debug information for assembly files and DWARF-2 debug information for C files in the object-file. The Workbench debugger has very limited support for STABS on Linux, which is mainly restricted to global information in system libraries (on 2.4.x Linux distributions). The debugger fully supports DWARF-2. STEPS TO REPRODUCE:No Details Available. WORKAROUND:Date Created: 11/17/2005 09:33:45 Visibility: External Created By: rarunkum Type: Workaround The workaround is to change the config.mk in the root level of the u-boot source. Find the line: AFLAGS_DEBUG := -Wa,-gstabs Change it to: AFLAGS_DEBUG := -Wa,-gdwarf2 Then rebuild u-boot and now you will have DWARF-2 debug information for all source files. Workbench will now allow you to do source-level debugging of the assembly file also. ############################################################################### As you see from windriver's report. They suggest to modify AFLAGS_DEBUG value to -gdwarf2. But when I compile uboot after modifying, compiler gives me these error messages. opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S: Assembler messages: /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable /opt/WindRiver_Evaluation2.4/workspace/uboot/lib_ppc/ppcstring.S:216: Error: Relocation cannot be done when using -mrelocatable I'm using uboot 1.0.0 and gcc 2.95 for powerpc. I'm using this combination,because only this combination works properly for our marvell mv64460 development board. In your opinion, how can I fix this problem?

2 1

Re: [U-Boot-Users] [DNX#2006062142000101] [PATCH] 02-add-support-for-ps2-keyb [...]
by DENX Support System 19 Jul '06

19 Jul '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006062142000101] was entered through the web interface: <snip> > In message > <47F3F98010FF784EBEE6526EAAB078D1024F8135(a)tq-mailsrv.tq-net.de> you > wrote: > > > > Fix support for PS/2 keyboard on TQM85xx boards > > Applied. thanks. > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > One difference between a man and a machine is that a machine is quiet > when well oiled. </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006062142000057] [patch] add-features-to-trab-board- [...]
by DENX Support System 19 Jul '06

19 Jul '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006062142000057] was entered through the web interface: <snip> > In message > <47F3F98010FF784EBEE6526EAAB078D1024F8130(a)tq-mailsrv.tq-net.de> you > wrote: > > > > Add features to TRAB board standalone test application. > > > > - add "touch read" command > > - the crc16 command now verifies the crc value written to the EEPROM > > - use i2c_write_multiple() instead of i2c_write(), because = > > i2c_write_mulitple() > > waites for the EEPROM to finish its write cycle > > Sorry, this patch does not apply. Please clean up and resubmit. > > Maybe you can also use this opportunity and through out the > duplicated CRC16 code from this file? > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > Never underestimate the power of human stupidity when it comes to > using technology they don't understand. </snip> Your U-Boot support team

1 0

[U-Boot-Users] Downloading an Image
by kushal ahuja 19 Jul '06

19 Jul '06

Dear Sir, I am compiling u-boot (make ap_config) in order to get " u-boot.bin" , and downloading the image by using MultiICE debugger. We have an image for e-cos with us which is working fine on our ARM7TDMI board , in order to load that image into our board first of all we have to load an image "initTool.axf" after that we load the binary image(.bin). Now same way we are adopting for loading an image created by u-boot but since that is basically for e-cos and we are doing it for LINUX, What way we will adopt in order to successfully download our image . -- Please Help (Thanks in Advance). Best Regards, Kushal Ahuja

1 0

[U-Boot-Users] [PATCH] 02-add-support-for-ps2-keyboard-on-tqm8540-board.patch
by Martin Krause 19 Jul '06

19 Jul '06

This patch replaces the patch add-support-for-ps2-keyboard-on-tqm8540-board.patch send to this list on Thu 17. Nov 2005. Add support for PS/2 keyboard on TQM8540 board Patch by Martin Krause, 02 Dez 2005 This is tested on a STK85XX baseboard. Make sure the PS/2 controller is programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3 Signed-off-by: Martin Krause <martin.krause(a)tqs.de> CHANGELOG: * Add support for PS/2 keyboard on TQM8540 board Patch by Martin Krause, 02 Dez 2005

2 3

Re: [U-Boot-Users] [DNX#2006062142000075] [patch] adjust-filenames-for-usb-up [...]
by DENX Support System 19 Jul '06

19 Jul '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006062142000075] was entered through the web interface: <snip> > In message > <47F3F98010FF784EBEE6526EAAB078D1024F8132(a)tq-mailsrv.tq-net.de> you > wrote: > > This is a multi-part message in MIME format. > > > > ------_=_NextPart_001_01C69526.4ED3CF20 > > Content-Type: text/plain; > > charset="iso-8859-1" > > Content-Transfer-Encoding: quoted-printable > > > > Adjust filenames for usb update images on TRAB board. > > > > During an automatic update via USB stick, U-Boot searches for images = > > with > > the name "firmware.img" and "kernel.img". This names are now changed to=20 > > "firmw_01.img" and "kernl_01.img". This is done, to prevent updates of = > > new > > boards (with the new macronics "c" step flashes) with old, incompatible=20 > > firmware or kernel versions. > > > > Signed-off-by Martin Krause <martin.krause(a)tqs.de> > > > > > > CHANGELOG: > > > > * Adjust filenames for usb update images on TRAB board. > > Patch by Martin Krause, 21 Jun 2006 > > > > During an automatic update via USB stick, U-Boot searches for images = > > with > > the name "firmware.img" and "kernel.img". This names are now changed = > > to=20 > > "firmw_01.img" and "kernl_01.img". This is done, to prevent updates = > > of new > > boards (with the new macronics "c" step flashes) with old, = > > incompatible=20 > > firmware or kernel versions. > > > > ------_=_NextPart_001_01C69526.4ED3CF20 > > Content-Type: application/octet-stream; > > name="adjust-filenames-for-usb-update-images-on-trab-board-.patch" > > Content-Transfer-Encoding: base64 > > Content-Description: adjust-filenames-for-usb-update-images-on-trab-board-.patch > > Content-Disposition: attachment; > > filename="adjust-filenames-for-usb-update-images-on-trab-board-.patch" > > > > QWRqdXN0IGZpbGVuYW1lcyBmb3IgdXNiIHVwZGF0ZSBpbWFnZXMgb24gVFJBQiBib2FyZC4KCkR1 > > cmluZyBhbiBhdXRvbWF0aWMgdXBkYXRlIHZpYSBVU0Igc3RpY2ssIFUtQm9vdCBzZWFyY2hlcyBm > > b3IgaW1hZ2VzIHdpdGgKdGhlIG5hbWUgImZpcm13YXJlLmltZyIgYW5kICJrZXJuZWwuaW1nIi4g > > VGhpcyBuYW1lcyBhcmUgbm93IGNoYW5nZWQgdG8gCiJmaXJtd18wMS5pbWciIGFuZCAia2Vybmxf > > MDEuaW1nIi4gIFRoaXMgaXMgZG9uZSwgdG8gcHJldmVudCB1cGRhdGVzIG9mIG5ldwpib2FyZHMg > > KHdpdGggdGhlIG5ldyBtYWNyb25pY3MgImMiIHN0ZXAgZmxhc2hlcykgd2l0aCBvbGQsIGluY29t > > cGF0aWJsZSAKZmlybXdhcmUgb3Iga2VybmVsIHZlcnNpb25zLgoKU2lnbmVkLW9mZi1ieSBNYXJ0 > > aW4gS3JhdXNlIDxtYXJ0aW4ua3JhdXNlQHRxcy5kZT4KCi0tLQpjb21taXQgNjQzNmEyM2RkMGU5 > > NWFiOTE2NGE1YWJkMDM3MGE4YjNhYWFjY2I3ZAp0cmVlIDc2YWI4NjBhOGZhMjFiOTFmNWU4MmM2 > > MjM5NzVhZDM5NjNkOTVkMmIKcGFyZW50IGUxYmJiMDNkZWI1NDZhYmNiMjI2ZWU2NGFkZWY0MDAx > > NWE3NWM2ZjMKYXV0aG9yIE1hcnRpbiBLcmF1c2UgPG1rckB0cS1zZXdzcnYtNC50cS1uZXQuZGU+ > > IFdlZCwgMjEgSnVuIDIwMDYgMTM6MjY6NTggKzAyMDAKY29tbWl0dGVyIE1hcnRpbiBLcmF1c2Ug > > PG1rckB0cS1zZXdzcnYtNC50cS1uZXQuZGU+IFdlZCwgMjEgSnVuIDIwMDYgMTM6MjY6NTggKzAy > > MDAKCiBib2FyZC90cmFiL2F1dG9fdXBkYXRlLmMgfCAgICA4ICsrKystLS0tCiAxIGZpbGVzIGNo > > YW5nZWQsIDQgaW5zZXJ0aW9ucygrKSwgNCBkZWxldGlvbnMoLSkKCmRpZmYgLS1naXQgYS9ib2Fy > > ZC90cmFiL2F1dG9fdXBkYXRlLmMgYi9ib2FyZC90cmFiL2F1dG9fdXBkYXRlLmMKb2xkIG1vZGUg > > MTAwNjQ0Cm5ldyBtb2RlIDEwMDc1NQppbmRleCAwNTZlNTYyLi4wNzY5M2NiCi0tLSBhL2JvYXJk > > L3RyYWIvYXV0b191cGRhdGUuYworKysgYi9ib2FyZC90cmFiL2F1dG9fdXBkYXRlLmMKQEAgLTU3 > > LDkgKzU3LDkgQEAgI2VuZGlmCiAgKgkJdmFsaWQgdGhlbiBydW4gaXQuCiAgKgkyKSBpZiBwcmVp > > bnN0LmltZyBpcyBmb3VuZCBsb2FkIGl0IGludG8gbWVtb3J5LiBJZiBpdCBpcwogICoJCXZhbGlk > > IHRoZW4gcnVuIGl0LiBVcGRhdGUgdGhlIEVFUFJPTS4KLSAqCTMpIGlmIGZpcm13YXJlLmltZyBp > > cyBmb3VuZCBsb2FkIGl0IGludG8gbWVtb3J5LiBJZiBpdCBpcyB2YWxpZCwKKyAqCTMpIGlmIGZp > > cm13XzAxLmltZyBpcyBmb3VuZCBsb2FkIGl0IGludG8gbWVtb3J5LiBJZiBpdCBpcyB2YWxpZCwK > > ICAqCQlidXJuIGl0IGludG8gRkxBU0ggYW5kIHVwZGF0ZSB0aGUgRUVQUk9NLgotICoJNCkgaWYg > > a2VybmVsLmltZyBpcyBmb3VuZCBsb2FkIGl0IGludG8gbWVtb3J5LiBJZiBpdCBpcyB2YWxpZCwK > > KyAqCTQpIGlmIGtlcm5sXzAxLmltZyBpcyBmb3VuZCBsb2FkIGl0IGludG8gbWVtb3J5LiBJZiBp > > dCBpcyB2YWxpZCwKICAqCQlidXJuIGl0IGludG8gRkxBU0ggYW5kIHVwZGF0ZSB0aGUgRUVQUk9N > > LgogICoJNSkgaWYgYXBwLmltZyBpcyBmb3VuZCBsb2FkIGl0IGludG8gbWVtb3J5LiBJZiBpdCBp > > cyB2YWxpZCwKICAqCQlidXJuIGl0IGludG8gRkxBU0ggYW5kIHVwZGF0ZSB0aGUgRUVQUk9NLgpA > > QCAtODEsOCArODEsOCBAQCAjZW5kaWYJLyogQVVfREVCVUcgKi8KIC8qIHBvc3NpYmxlIG5hbWVz > > IG9mIGZpbGVzIG9uIHRoZSBVU0Igc3RpY2suICovCiAjZGVmaW5lIEFVX1BSRVBBUkUJInByZXBh > > cmUuaW1nIgogI2RlZmluZSBBVV9QUkVJTlNUCSJwcmVpbnN0LmltZyIKLSNkZWZpbmUgQVVfRklS > > TVdBUkUJImZpcm13YXJlLmltZyIKLSNkZWZpbmUgQVVfS0VSTkVMCSJrZXJuZWwuaW1nIgorI2Rl > > ZmluZSBBVV9GSVJNV0FSRQkiZmlybXdfMDEuaW1nIgorI2RlZmluZSBBVV9LRVJORUwJImtlcm5s > > XzAxLmltZyIKICNkZWZpbmUgQVVfQVBQCQkiYXBwLmltZyIKICNkZWZpbmUgQVVfRElTSwkJImRp > > c2suaW1nIgogI2RlZmluZSBBVV9QT1NUSU5TVAkicG9zdGluc3QuaW1nIgo= > > > > ------_=_NextPart_001_01C69526.4ED3CF20 > > Content-Type: text/plain; charset="us-ascii" > > MIME-Version: 1.0 > > Content-Transfer-Encoding: 7bit > > Content-Disposition: inline > > > > > > ------_=_NextPart_001_01C69526.4ED3CF20 > > Content-Type: text/plain; charset="us-ascii" > > MIME-Version: 1.0 > > Content-Transfer-Encoding: 7bit > > Content-Disposition: inline > > > > _______________________________________________ > > U-Boot-Users mailing list > > U-Boot-Users(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/u-boot-users </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006062142000084] [patch] adjust-rtc-century-handling [...]
by DENX Support System 19 Jul '06

19 Jul '06

Hello list, inside the automatic U-Boot patch tracking system a follow up to [DNX#2006062142000084] was entered through the web interface: <snip> > In message > <47F3F98010FF784EBEE6526EAAB078D1024F8134(a)tq-mailsrv.tq-net.de> you > wrote: > > > > Adjust RTC century handling on STK52xx board to match with Linux driver. > > Patch by Martin Krause, 12 Jun 2006 > > Applied, thanks. > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > Without facts, the decision cannot be made logically. You must rely > on your human intuition. > -- Spock, "Assignment: Earth", stardate unknown </snip> Your U-Boot support team

1 0