Hello,

We are using board pxa255, UBoot version 1.3.3, FLASH chipset is PC28F256P30B85 (two chipsets) connected to same chip select. This FLASH supports CFI and U-Boot code has CFI_FLASH.c. Do we need to write functions (Read, Write, erase) for this FLASH or U-Boot has support for this already?

Regards Amit Kumar P.S: Please ignore the disclaimer as I cannot remove it.

**************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***