Hello,

               

We are using board pxa255, UBoot version 1.3.3, FLASH chipset is PC28F256P30B85 (two chipsets) connected to same chip select. This FLASH supports CFI and U-Boot code has CFI_FLASH.c.

Do we need to write functions (Read, Write, erase) for this FLASH or U-Boot has support for this already?

 

Regards

Amit Kumar

P.S: Please ignore the disclaimer as I cannot remove it. 

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***