[U-Boot-Users] Can I load u-boot to my board?
The board on my hand is SBC8260 from EST corp. The JTAG comes with this board is VisionProbe II from WindRiver. The board has been used for VxWorks.
I search the web and can not find any tech inforamtion about this JTAG. No support information on the web for linux usage too.
I use ELDK to build u-boot for sbc8200, but not sure if it works on this board.
Is there any way I can load u-boot to this board?
Thanks,
DD
__________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com
In message 20041109062856.76466.qmail@web54409.mail.yahoo.com you wrote:
The board on my hand is SBC8260 from EST corp. The JTAG comes with this board is VisionProbe II from
Actually the JTAG or rather the COP port on the boards is standard. Your VisionProbe tool is a different issue.
I search the web and can not find any tech inforamtion about this JTAG. No support information on the web for
Search again. Ask the vendor.
I use ELDK to build u-boot for sbc8200, but not sure if it works on this board.
Sure it does.
Guess what the "sbc8260" board configuration is good for?
Is there any way I can load u-boot to this board?
Sure. I could tell you how to do it with a BDI2000. Sorry, never used a VisionProbe ...
Best regards,
Wolfgang Denk
Sorry for the typo. The sbc8200 should be sbc8260.
DD
Wolfgang Denk wd@denx.de wrote:
In message 20041109062856.76466.qmail@web54409.mail.yahoo.com you wrote:
The board on my hand is SBC8260 from EST corp. The JTAG comes with this board is VisionProbe II from
Actually the JTAG or rather the COP port on the boards is standard. Your VisionProbe tool is a different issue.
I search the web and can not find any tech inforamtion about this JTAG. No support information on the web for
Search again. Ask the vendor.
I use ELDK to build u-boot for sbc8200, but not sure if it works on this board.
It should be sbc8260.
Sure it does.
Guess what the "sbc8260" board configuration is good for?
Is there any way I can load u-boot to this board?
Sure. I could tell you how to do it with a BDI2000. Sorry, never used a VisionProbe ...
The issue is I do not have BDI2000 on hand.
Best regards,
Wolfgang Denk
In message 20041109203323.50959.qmail@web54404.mail.yahoo.com you wrote:
Sorry for the typo. The sbc8200 should be sbc8260.
Yes. Did you actually read what I wrote???
It should be sbc8260.
Yes. Please read again:
Sure it does.
Guess what the "sbc8260" board configuration is good for?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Do you get it?
--0-608062285-1100032403=:47764 Content-Type: text/html; charset=us-ascii
<DIV>Sorry for the typo. The sbc8200 should be sbc8260.</DIV>
PLEASE DO NOT POST HTML TO THIS LIST!
Best regards,
Wolfgang Denk
participants (2)
-
duo dong -
Wolfgang Denk