In message <20041109062856.76466.qmail@web54409.mail.yahoo.com> you wrote:
> The board on my hand is SBC8260 from EST corp. The
> JTAG comes with this board is VisionProbe II from

Actually the JTAG or rather the COP port on the boards is standard.
Your VisionProbe tool is a different issue.

> I search the web and can not find any tech inforamtion
> about this JTAG. No support information on the web for

Search again. Ask the vendor.

> I use ELDK to build u-boot for sbc8200, but not sure
> if it works on this board.

It should be sbc8260.

Sure it does.

Guess what the "sbc8260" board configuration is good for?

> Is there any way I can load u-boot to this board?

Sure. I could tell you how to do it with a BDI2000. Sorry, never used
a VisionProbe ...

The issue is I do not have BDI2000 on hand.

Best regards,

Wolfgang Denk

--
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"Stupidity, like virtue, is its own reward" - William E. Davidsen