hi all,

I create a mtdblock partition from linux on mtdblock0

I flash partition with this procedure : #linux

flash_eraseall /dev/mtdchar0 nandwrite /dev/mtdchar0 jffs2.img mount -t jffs2 /dev/mtdblock0 /mnt/mtd cd /mnt/mtd ls toto /opt umount /mnt/mtd reboot

the partition jffs2 running correctly under linux but when I try this in u-boot, there are problem #u-boot

ls

warnig block writes should be last 20487 bytes and start on a 2048 byte boundry...

If you have a suggest about this problem ? Maybe must be set partition offset and size partition ?

thanks for your answer ... and your help ...

With kind regards/ Cordialement,

David Flament SySol9100 System Integration Engineer --------------------------------------------------------------------------------------------------------- Philips Semiconductors - BL Cellular Systems - MST System Solutions Route d'Angers 72081 Le Mans Cedex 9 France Phone :+33 (0) 2 19 18 43 11 Mobile : +33 (0)6 23 05 12 18 mail : flament.assystem@philips.com