hi all,

I create a mtdblock partition from linux on mtdblock0

I flash partition with this procedure :
#linux
> flash_eraseall /dev/mtdchar0
> nandwrite /dev/mtdchar0 jffs2.img
> mount -t jffs2 /dev/mtdblock0 /mnt/mtd
> cd /mnt/mtd
> ls
>         toto        /opt
> umount /mnt/mtd
> reboot

the partition jffs2 running correctly under linux but when I try this in u-boot, there are problem
#u-boot
>ls
warnig block writes should be last 20487 bytes and start on a 2048 byte boundry...

If you have a suggest about this problem ?
Maybe must be set partition offset and size partition ?

thanks for your answer ... and your help ...


With kind regards/ Cordialement,

David Flament
SySol9100 System Integration Engineer
---------------------------------------------------------------------------------------------------------
Philips Semiconductors -  BL Cellular Systems - MST System Solutions
Route d'Angers  
72081 Le Mans Cedex 9
France
Phone :+33 (0) 2 19 18 43 11
Mobile : +33 (0)6 23 05 12 18
mail : flament.assystem@philips.com