[U-Boot-Users] using BDI200 to access RAM

Hello, I work with custom board based on MPC850. This board has 8MB flash on address 0xff800000 I try to access (get/set) memory using BDI2000 telnet API (MD/MM) Unfortunately all memory I can see is the flash. It appears on address 0 (MD 0) and returns every 8MB. Command PHYS 0 (map physical address) returns 0.

How can I access DRAM using BDI telnet API?

Thanks in advance.

===================== Vladimir Levertov Senior Software Engineer MKS Instruments Tel: +972-8-9181010 Fax: +972-8-9181020 =====================