Hello,
I work with custom board based on MPC850.
This board has 8MB  flash on address 0xff800000
I try to access (get/set) memory using BDI2000 telnet API (MD/MM)
Unfortunately all memory I can see is the flash. It appears on address 0 (MD 0) and returns every 8MB.
Command PHYS 0 (map physical address) returns 0.

How can I access DRAM using BDI telnet API?

Thanks in advance.

=====================
Vladimir Levertov
Senior Software Engineer
MKS Instruments
Tel: +972-8-9181010
Fax: +972-8-9181020
=====================