Re: [U-Boot-Users] How to use UBoot for S3CEB2410 board

Hi Marco and all,

Thanks for your reply, but I want to config and compile U-Boot for S3CEB2410 without commercial support.

Please help me how to customize and compile U-Boot for this board.

Thanks,

----- Original Message ---- From: Marco Cavallini arm.linux@koansoftware.com To: thien van nvthien1112@yahoo.com Cc: u-boot-users@lists.sourceforge.net Sent: Thursday, November 2, 2006 1:46:15 AM Subject: Re: [U-Boot-Users] How to use UBoot for S3CEB2410 board

thien van ha scritto:

Hi all,

I have bought a board at http://armkits.com/Product/s3ceb2410.asp and I am trying to use uboot to boot it from SMC card, Here are the steps I did:

.snip.

Hi, it's a normal behaviour because smdk2410_config is targeted for Samsung Evaluation Board. You must customize U-Boot for your board, if you need commercial support we can do that for you ;-)

regards,