Thanks for your reply, but I want to config and compile U-Boot for S3CEB2410 without
commercial support.
Please help me how to customize and compile U-Boot for this board.
----- Original Message ----
From: Marco Cavallini <arm.linux@koansoftware.com>
To: thien van <nvthien1112@yahoo.com>
Cc: u-boot-users@lists.sourceforge.net
Sent: Thursday, November 2, 2006 1:46:15 AM
Subject: Re: [U-Boot-Users] How to use UBoot for S3CEB2410 board
thien van ha scritto:
> Hi all,
>
> I have bought a board at
http://armkits.com/Product/s3ceb2410.asp and I am trying to use uboot to boot it from SMC card, Here are the steps I did:
.snip.
Hi,
it's a normal behaviour because smdk2410_config is targeted for Samsung
Evaluation Board.
You must customize U-Boot for your board, if you need commercial support
we can do that for you ;-)
regards,
--
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
- Atmel Third Party Consultant
- Intel PCA Developer Network Member
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
www.KoanSoftware.com |
www.KaeilOS.com