[U-Boot-Users] tsec help

Hello,

My cpu is MPC8343E with dual tsec, phy is marvell 88E1111S. Now the physical link is up, but I just cannot ping. I printed some debug message about maccfg1/2 registers:

=> ping 192.168.1.1 tsec_halt Trying TSEC0 tsec_halt Speed: 100, full duplex TSEC0: maccfg2 = 0x7205 TSEC0: maccfg1 = 0xf Using TSEC0 device tsec_halt ping failed; host 192.168.1.1 is not alive

I checked the MAC transmi counter register there are packets sending out, but no packet on the wire. The PHY is hard wired into RGMII to copper mode. Could anyone who has done similiar work point to where the problem is? Where to look at?

Regards,

- Reeve