Hello,<br>
<br>
My cpu is MPC8343E with dual tsec, phy is marvell 88E1111S. Now the
physical link is up, but I just cannot ping. I printed some debug
message about maccfg1/2 registers:<br>
<br>
=&gt; ping <a href="http://192.168.1.1">192.168.1.1</a><br>
tsec_halt<br>
Trying TSEC0<br>
tsec_halt<br>
Speed: 100, full duplex<br>
TSEC0: maccfg2 = 0x7205<br>
TSEC0: maccfg1 = 0xf<br>
Using TSEC0 device<br>
tsec_halt<br>
ping failed; host <a href="http://192.168.1.1">192.168.1.1</a> is not alive<br>
<br>
I checked the MAC transmi counter register there are packets sending
out, but no packet on the wire. The PHY is hard wired into RGMII to
copper mode. Could anyone who has done similiar work point to where the
problem is? Where to look at?<br>
<br>
Regards,<br>
<br>
- Reeve<br>