January 2025 - U-Boot

[PATCH v1 1/1] board: zynqmp: zynqmp-sm-k26-revA: release DP from reset
by Neal Frager 06 Jan '25

06 Jan '25

This releases the DP configuration from reset early on during the boot process for K26 SOM. It will also avoid the boot hang situation should any attempt be made to configure the DP registers while it is still in reset. Fixes the same issue as described by this commit: https://github.com/u-boot/u-boot/commit/8b81010a2fe385524b58bea9116f1b6954c… Signed-off-by: Neal Frager <neal.frager(a)amd.com> --- board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c index e5598807e8..f8d7c8466f 100644 --- a/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c +++ b/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c @@ -465,7 +465,7 @@ static unsigned long psu_peripherals_pre_init_data(void) static unsigned long psu_peripherals_init_data(void) { - psu_mask_write(0xFD1A0100, 0x0000807CU, 0x00000000U); + psu_mask_write(0xFD1A0100, 0x0001807CU, 0x00000000U); psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U); psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000000U); -- 2.25.1

2 1

[PATCH] xilinx: Sort OF_LIST and add missing vpk120 and zcu670 platforms
by Michal Simek 06 Jan '25

06 Jan '25

Sort OF_LIST entries and also add missing vpk120 and zcu670 platforms. Compilation is failing when these DTs are exported via DEVICE_TREE because binman is not able to create a link for default configuration. Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- configs/xilinx_zynqmp_virt_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 09f487acf0dc..b13079cdf707 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -110,7 +110,7 @@ CONFIG_CMD_UBI=y CONFIG_PARTITION_TYPE_GUID=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_BOARD=y -CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-e-a2197-00-revB zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu106-rev1.0 zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-dlc21-revA" +CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-dlc21-revA zynqmp-e-a2197-00-revA zynqmp-e-a2197-00-revB zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-vpk120-revA zynqmp-vp-x-a2785-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-rev1.1 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-rev1.0 zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-zcu670-revA zynqmp-zcu670-revB" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains" CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_FAT=y -- 2.43.0

1 1

[PATCH] zynqmp: Remove usb init initialization for Kria
by Michal Simek 06 Jan '25

06 Jan '25

USB hub initialization is done by driver introduced by commit 09f557e106ef ("usb: onboard-hub: Add i2c initialization for usb5744 hub") that's why there is no need to do initialization via variables. Reported-by: Love Kumar <love.kumar(a)amd.com> Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- board/xilinx/zynqmp/zynqmp_kria.env | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env index ff3a0924de7d..b0c2ac6f2e86 100644 --- a/board/xilinx/zynqmp/zynqmp_kria.env +++ b/board/xilinx/zynqmp/zynqmp_kria.env @@ -62,14 +62,8 @@ bootmenu_0=eMMC Boot=run som_mmc_boot bootmenu_1=SD Boot=run som_cc_boot bootmenu_delay=5 -usb_hub_init=mw 1000 0056 && sleep 1 && i2c write 1000 2d aa 2 -s - -# usb hub init -kv260_setup=i2c dev 1 && run usb_hub_init -# usb hub init -kr260_setup=i2c dev 1 && run usb_hub_init; i2c dev 2 && run usb_hub_init; -# usb hub init with enabling PM nodes for ... -kd240_setup=i2c dev 1 && run usb_hub_init;zynqmp pmufw node 33; zynqmp pmufw node 47 +# Enabling PM nodes for uart0 and can0 +kd240_setup=zynqmp pmufw node 33; zynqmp pmufw node 47 tpm_setup=tpm autostart; tpm_reset=echo "!!! For TPM reset a full power cycle or pressing the POR_B button is required !!!"; @@ -79,7 +73,7 @@ tpm_kd240=if test ${card1_rev} = A; then run tpm_reset; fi board_setup=\ rtc dev 0; \ zynqmp mmio_write 0xFFCA0010 0xfff 0; \ -if test ${card1_name} = SCK-KV-G; then run kv260_setup; run tpm_kv260; fi;\ -if test ${card1_name} = SCK-KR-G; then run kr260_setup; run tpm_reset; fi;\ +if test ${card1_name} = SCK-KV-G; then run tpm_kv260; fi;\ +if test ${card1_name} = SCK-KR-G; then run tpm_reset; fi;\ if test ${card1_name} = SCK-KD-G; then run kd240_setup; run tpm_kd240; fi;\ run tpm_setup -- 2.43.0

2 2

[PATCH v3 0/5] Static initcalls
by Jerome Forissier 04 Jan '25

04 Jan '25

This series replaces the dynamic initcalls (with function pointers) with static calls, and gets rid of initcall_run_list(), init_sequence_f, init_sequence_f_r and init_sequence_r. This makes the code simpler and the binary slighlty smaller: -2217 bytes/-0.21 % with LTO enabled and -510 bytes/-0.05 % with LTO disabled (xilinx_zynqmp_kria_defconfig). Execution time doesn't seem to change noticeably. There is no impact on the SPL. Changes in v3: - Use printf() rather than debug() to report initcall failures (Quentin S.) - initcall_run_f(): replace one erroneous call to WATCHDOG_INIT() with WATCHDOG_RESET() (Ilias A.) - Fix relocate_code() in arch/sh/lib/board.c to address CI failures with r2dplus (https://lists.denx.de/pipermail/u-boot/2025-January/576213.html) (Tom R.) - Add comments to initcall_run_f() and initcall_run_r() (Simon G.) Changes in v2: - INTICALL() and INITCALL_EVT() now call hang() immediately on error - Fixed typo: s/intcall_run_f_r/initcall_run_f_r/ Jerome Forissier (4): board_init_f(): use static calls board_init_f_r(): use static calls board_init_r(): use static calls initcall: remove initcall_run_list() Michal Simek (1): common: board: Simplify array with function pointers with CONFIG_IS_ENABLED arch/sh/lib/board.c | 9 +- common/board_f.c | 214 ++++++++++++++----------------- common/board_r.c | 245 ++++++++++++++---------------------- include/initcall.h | 45 +++---- lib/Makefile | 1 - lib/initcall.c | 102 --------------- test/py/tests/test_trace.py | 8 +- 7 files changed, 220 insertions(+), 404 deletions(-) delete mode 100644 lib/initcall.c -- 2.43.0

3 7

[PATCH] rpi: Add identifiers for the new RPi 5 series
by Peter Robinson 04 Jan '25

04 Jan '25

The Raspberry Pi foundation have released the Raspberry Pi 500, CM5 an CM5 lite devices so add the assoicated revision identifers so we can detect them. Signed-off-by: Peter Robinson <pbrobinson(a)gmail.com> --- board/raspberrypi/rpi/rpi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 18be244aa79..1e43c631898 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -193,6 +193,21 @@ static const struct rpi_model rpi_models_new_scheme[] = { DTB_DIR "bcm2712-rpi-5-b.dtb", true, }, + [0x18] = { + "Compute Module 5", + DTB_DIR "bcm2712-rpi-cm5-cm5io.dtb", + true, + }, + [0x19] = { + "500", + DTB_DIR "bcm2712-rpi-500.dtb", + true, + }, + [0x1A] = { + "Compute Module 5 Lite", + DTB_DIR "bcm2712-rpi-cm5l-cm5io.dtb", + true, + }, }; static const struct rpi_model rpi_models_old_scheme[] = { -- 2.47.1

3 2

[PATCH 00/67] upl: Align with the updated spec
by Simon Glass 04 Jan '25

04 Jan '25

The current UPL spec[1] has been tidied up and improved over the last year, since U-Boot's original UPL support was written. This series addresses various issues, with a goal of having U-Boot boot EDK2. There is still more work to do, but this series gets to the point (on QEMU) where the ACPI tables are required. Further work will be needed to relocate the tables out of the QEMU firmware-filesystem. [1] git@github.com:UniversalPayload/spec.git commit 3f1450d Simon Glass (67): bloblist: Make BLOBLIST_ALLOC the default abuf: Provide a way to get the buffer address abuf: Allow use in host tools abuf: Provide a constant buffer cpu: Provide a way to get the physical-address size serial: Support info() method in ns16550 xPL with UPL mkimage: Update map_to_sysmem() to match its prototype x86: Emable meminfo command x86: Show the timestamp counter with bdinfo ofnode: Use 4K for a default tree-size ofnode: Indicate when out of space in a few places ofnode: Update of_add_subnode() to indicate name is alloced boot: Rename fit_image_get_data() boot: Rename fit_image_get_data_and_size() boot: Update fit_image_get_emb_data to use abuf boot: Use fit_image_get_data() to get data boot: Update fit_image_get_data() to use abuf test: Fix inpected typo in upl test emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE emulation: Use bloblist to hold tables x86: Create more space for SPL with qemu-x86_64 upl: Create a function to create a memory node upl: Update add_upl_memmap() to use write_mem_node() upl: Update add_upl_memres() to use write_mem_node() upl: Support writing a UPL only for testing upl: Drop enum upl_serial_access_type upl: Init serial and graphics alists in upl_init() upl: Move serial and graphics addition-code to upl_common pci: video: Set up the pixel-format field x86: Show an error if video fails x86: Support jumping to a UPL image x86: Enable UPL handoff for SPL x86: Align the SMBIOS table to a 4K boundary upl: Require OFNODE_MULTI_TREE when writing a UPL handoff upl: Drop the argument to spl_write_upl_handoff() x86: emulation: Enable UPL upl: Correct comment and condition in add_upl_memres() upl: Add addr/size tags in the reserved-memory node upl: Update upl_add_graphics() to return framebuffer upl: Add a function to write a UPL handoff to an abuf upl: Use a 64-bit value for a memregion base-address upl: Set bit 32 of the address when using ISA upl: Add RAM to the memory region upl: Add a compatible string for the upl-params node upl: Move buffer_addr_size() higher and rename upl: Factor out part of encode_reg() to new function upl: Move decode_addr_size() higher and rename upl: Factor out part of decode_reg() to new function upl: Correct name of upl-images dm: core: Clarify behaviour of ofnode_name_eq() dm: core: Allow ofnode_name_eq() to accept a unit address dm: core: Rewrite ofnode_find_subnode() to use ofnode API upl: test: Show the handoff FDT when debugging upl: Use a reg property to specify the FIT address and size upl: Update and tidy writing of images upl: Make use of alist_for_each() upl: Correct use of sizeof() upl: Drop acpi_nvs_size upl: Improve uniqueness of log_msg_ret() strings upl: Add PCI information upl: Handle serial on an ISA bus with /chosen node upl: Add missing word in comment for upl_write_handoff() upl: Add a command to execute a UPL payload scripts: Update qemu script to use 64-bit on x86 always scripts: Update qemu script to support specifying a UPL upl: Add reserved memory for the ACPI and SMBIOS tables upl: Add an 'addr' property for Tianocore arch/Kconfig | 2 + arch/arm/cpu/armv8/sec_firmware.c | 13 +- arch/arm/mach-k3/r5/sysfw-loader.c | 11 +- arch/x86/include/asm/cpu.h | 9 - arch/x86/lib/bdinfo.c | 3 + arch/x86/lib/bootm.c | 18 +- arch/x86/lib/spl.c | 12 +- arch/x86/lib/tables.c | 9 +- boot/Kconfig | 9 + boot/Makefile | 1 + boot/image-board.c | 11 +- boot/image-fit.c | 98 ++---- boot/upl_common.c | 191 ++++++++++ boot/upl_exec.c | 130 +++++++ boot/upl_read.c | 220 ++++++------ boot/upl_write.c | 464 ++++++++++++++++--------- cmd/upl.c | 36 +- cmd/ximg.c | 14 +- common/Kconfig | 15 +- common/spl/spl.c | 2 +- common/spl/spl_fit.c | 8 +- common/spl/spl_upl.c | 114 +----- common/splash_source.c | 18 +- common/update.c | 7 +- configs/chromebook_bob_defconfig | 1 + configs/chromebook_coral_defconfig | 1 + configs/chromebook_kevin_defconfig | 1 + configs/chromebook_samus_tpl_defconfig | 1 + configs/qemu-x86_64_defconfig | 9 +- configs/qemu-x86_defconfig | 2 + configs/qemu_arm64_defconfig | 2 + configs/qemu_arm_defconfig | 2 + drivers/core/ofnode.c | 57 +-- drivers/misc/qfw_acpi.c | 37 +- drivers/misc/qfw_smbios.c | 45 ++- drivers/pci/pci_rom.c | 3 + drivers/serial/ns16550.c | 2 +- drivers/video/bochs.c | 1 + drivers/video/video-uclass.c | 1 + dts/Kconfig | 2 +- include/abuf.h | 25 ++ include/alist.h | 2 +- include/cpu.h | 14 + include/dm/ofnode.h | 15 +- include/image.h | 39 ++- include/spl.h | 3 +- include/upl.h | 211 +++++++++-- include/video.h | 2 + lib/Kconfig | 1 + lib/Makefile | 5 + lib/abuf.c | 21 +- lib/alist.c | 2 +- scripts/build-qemu.sh | 28 +- test/boot/upl.c | 72 ++-- test/common/Makefile | 4 + test/dm/core.c | 5 + test/dm/ofnode.c | 19 + test/lib/abuf.c | 27 +- test/py/tests/test_upl.py | 2 +- tools/Makefile | 3 +- tools/fit_image.c | 8 +- tools/image-host.c | 23 +- tools/mkimage.h | 2 +- 63 files changed, 1445 insertions(+), 670 deletions(-) create mode 100644 boot/upl_exec.c -- 2.43.0

3 75

Pull request efi-next-20250104
by Heinrich Schuchardt 04 Jan '25

04 Jan '25

Dear Tom, The following changes since commit ec9263b4f15c4cf82eb6a211c67baa6385065b8e: Fix neighbor discovery ethernet address saving (2025-01-01 14:40:04 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-next-20250104 for you to fetch changes up to ce190e1b33b8c0e1228f4123759dfa1981c202de: efi: Correct ECPT table GUID (2025-01-04 02:17:06 +0100) Gitlab CI reported no issues: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/24075 ---------------------------------------------------------------- Pull request efi-next-20250104 Documentation: * doc: develop: Fix typos and wording in binman/binman.rst * doc: develop: Fix typos and wording in gdb.rst * doc: sandbox: Fix the "sb" command name * doc/develop/distro.rst: Better document upstream definition of extlinux.conf UEFI: With this pull request the UEFI sub-system detects all boot devices even if they have not been probed before. If this adds to much boot delay individual bootmeths and bootdevs can be disabled via the customizing. * efi_loader: avoid writing message in Exit() boot service * efi_loader: run bootdev_hunt() to find ESP * efi_loader: update EFI specification version * cmd: efidebug: update output of memory attributes * efi_loader: Don't warn if the TCG2 FinalEvents table is not installed * cmd: bootmenu: add parameter -e for UEFI boot options * efi_loader: Update startimage_exit self-test to check error * efi: Correct ECPT table GUID Others: Building the API demo application for riscv64 is supported. * API: unify platform_sys_info() implementations * examples: implement _start and syscall for RISC-V * examples: use architecture specific memset() on RISC-V * examples: use QEMU compatible LOAD_ADDR on RISC-V * test: fix test_extension.py * configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION * CI: xilinx_versal_virt: disable USB_DWC3 * net: eth_bootdev_hunt() should not run DHCP ---------------------------------------------------------------- Adriano Cordova (1): efi_loader: Expose efi_reinstall_protocol_interface in efi_loader.h Aleksandar Gerasimovski (1): efi_loader: fix pe reloc pointer overrun Heinrich Schuchardt (13): API: unify platform_sys_info() implementations examples: implement _start and syscall for RISC-V examples: use architecture specific memset() on RISC-V examples: use QEMU compatible LOAD_ADDR on RISC-V efi_loader: avoid writing message in Exit() boot service test: fix test_extension.py configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION CI: xilinx_versal_virt: disable USB_DWC3 net: eth_bootdev_hunt() should not run DHCP cmd: bootmenu: add parameter -e for UEFI boot options efi_loader: run bootdev_hunt() to find ESP efi_loader: update EFI specification version cmd: efidebug: update output of memory attributes Ilias Apalodimas (1): efi_loader: Don't warn if the TCG2 FinalEvents table is not installed Lothar Rubusch (2): doc: develop: Fix typos and wording in binman/binman.rst doc: develop: Fix typos and wording in gdb.rst Olivier L'Heureux (1): doc: sandbox: Fix the "sb" command name Simon Glass (1): efi_loader: Update startimage_exit self-test to check error Tom Rini (1): doc/develop/distro.rst: Better document upstream definition of extlinux.conf Yang Gang (1): efi: Correct ECPT table GUID .azure-pipelines.yml | 1 + .gitlab-ci.yml | 1 + api/Makefile | 9 +- api/api_platform-arm.c | 35 ---- api/api_platform-mips.c | 29 --- api/api_platform.c | 25 +++ cmd/bootmenu.c | 39 +++- cmd/efidebug.c | 5 +- configs/sandbox_defconfig | 1 - doc/develop/distro.rst | 15 +- doc/develop/gdb.rst | 10 +- doc/usage/cmd/bootmenu.rst | 13 +- doc/usage/cmd/sb.rst | 6 +- examples/api/Makefile | 7 +- examples/api/crt0.S | 32 ++++ include/efi.h | 2 + include/efi_api.h | 8 +- include/efi_loader.h | 5 + lib/efi_loader/efi_boottime.c | 9 +- lib/efi_loader/efi_image_loader.c | 2 +- lib/efi_loader/efi_setup.c | 8 + lib/efi_loader/efi_tcg2.c | 2 +- lib/efi_selftest/efi_selftest_startimage_exit.c | 6 +- net/eth_bootdev.c | 30 +-- test/py/tests/test_extension.py | 4 +- tools/binman/binman.rst | 234 ++++++++++++------------ 26 files changed, 300 insertions(+), 238 deletions(-) delete mode 100644 api/api_platform-arm.c delete mode 100644 api/api_platform-mips.c create mode 100644 api/api_platform.c

3 3

[PATCH 0/2] fs: fat: Implement FAT file rename
by Burak Gerz 03 Jan '25

03 Jan '25

Hello This patch series is a first implementation for file renaming on a FAT filesystems. This implementation does a file rename only (no moving between directories) as needed by bootloaders like systemd-boot [1]. The renaming process is tried to be made as fail-safe as possible, by 1. Writing the new, empty file 2. Copying the address of the start cluster into new directory entry 3. Deleting old file This can decay in the worst case to a hard link Additionally, make use of the FAT file rename in /lib/efi_loader [1] https://www.freedesktop.org/software/systemd/man/latest/systemd-boot.html#B… Burak Gerz (2): efi_loader: enable support for file renaming fs: fat: Implement FAT file rename fs/fat/fat_write.c | 99 +++++++++++++++++++++++++++++++++++++++ fs/fs.c | 30 ++++++++++++ include/fat.h | 1 + include/fs.h | 2 + lib/efi_loader/efi_file.c | 9 ++-- 5 files changed, 137 insertions(+), 4 deletions(-) -- 2.45.2

3 5

Secure boot on Milk V duo 256
by Waldo Alvarez 03 Jan '25

03 Jan '25

Hello: I am figuring out how to proceed on secure booting the Milk V DUO 256. Likely in this list I can get some help. It is ARM/Risc-V board with an SG2002 SOC. The SOC has OTP memory and some bootrom. The current distribution uses u-boot and linux buildroot but doesn't do secure boot. Therefore I am trying to start at the first part. Verify digital dignature of u-boot and have u-boot verify digital signature of the kernel. Can someone point me here in the right direction no how to proceed. Regards Waldo Alvarez Desarrollo de Software / Software Development https://pipflow.com https://tradingfuturo.com Sent with [Proton Mail](https://proton.me/mail/home) secure email.

2 2

[PATCH v4 0/5] rockchip: Add support for Radxa ROCK 5C
by FUKAUMI Naoki 03 Jan '25

03 Jan '25

Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer. Cristian Ciocaltea (1): arm64: dts: rockchip: Add HDMI0 node to rk3588 FUKAUMI Naoki (3): arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A arm64: dts: rockchip: add Radxa ROCK 5C rockchip: Add support for Radxa ROCK 5C Sam Edwards (1): arm64: dts: rockchip: Split up RK3588's PCIe pinctrls arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi | 11 + arch/arm/mach-rockchip/rk3588/Kconfig | 21 + board/radxa/rock-5c-rk3588s/Kconfig | 12 + board/radxa/rock-5c-rk3588s/MAINTAINERS | 7 + configs/rock-5c-rk3588s_defconfig | 84 ++ doc/board/rockchip/rockchip.rst | 1 + .../arm64/rockchip/rk3588-base-pinctrl.dtsi | 271 +++++- .../src/arm64/rockchip/rk3588-base.dtsi | 41 + .../src/arm64/rockchip/rk3588s-rock-5a.dts | 34 + .../src/arm64/rockchip/rk3588s-rock-5c.dts | 920 ++++++++++++++++++ include/configs/rock-5c-rk3588s.h | 15 + 11 files changed, 1369 insertions(+), 48 deletions(-) create mode 100644 arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi create mode 100644 board/radxa/rock-5c-rk3588s/Kconfig create mode 100644 board/radxa/rock-5c-rk3588s/MAINTAINERS create mode 100644 configs/rock-5c-rk3588s_defconfig create mode 100644 dts/upstream/src/arm64/rockchip/rk3588s-rock-5c.dts create mode 100644 include/configs/rock-5c-rk3588s.h -- 2.43.0

2 10