January 2025 - U-Boot

[PATCH v4 0/3] Add bitbang feature for npcm8xx and driver
by Michael Chang 24 Jan '25

24 Jan '25

I am resubmitting the patch titled "Add bitbang feature for npcm8xx and driver" for review and inclusion in the upstream project. Driver didn't support bitbang feature. Add bb_miiphy_bus function for driver and open feature for npcm8xx the log is as below: ------------------------------------------------- U-Boot 2024.10-g30b9cdaf2df5-dirty (Jan 09 2025 - 00:57:37 +0000) CPU-0: NPCM845 A1 @ Model: Nuvoton npcm845 Development Board (Device Tree) DRAM: 1 GiB RNG: NPCM RNG module bind OK OTP: NPCM OTP module bind OK AES: NPCM AES module bind OK SHA: NPCM SHA module bind OK I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled Core: 649 devices, 28 uclasses, devicetree: separate WDT: Not starting watchdog@901c MMC: sdhci@f0842000: 0 Loading Environment from SPIFlash... SF: Detected w25q512jvq with page size 256 Bytes, erase size 64 KiB, total 64 MiB OK In: serial@0 Out: serial@0 Err: serial@0 Net: eth0: eth@f0802000, eth1: eth@f0804000, eth3: eth@f0808000 Hit any key to stop autoboot: 0 U-Boot> U-Boot> U-Boot>setenv ipaddr 192.168.16.3 U-Boot>ping 192.168.16.12 eth@f0802000 Waiting for PHY auto negotiation to complete ......... TIMEOUT ! Could not initialize PHY eth@f0802000 eth@f0804000 Waiting for PHY auto negotiation to complete ......... TIMEOUT ! Could not initialize PHY eth@f0804000 Speed: 100, full duplex Using eth@f0808000 device host 192.168.16.12 is alive ------------------------------------------------- Changes for v4: - Replece bitbang function prefix npcm to dw. Changes for v3: - Support multiple buses for multiple Ethernet interfaces. Changes for v2: - add bitbang delay dts read - modify printf to debug Michael Chang (3): ARM: dts: nuvoton: Add bitbang delay through dts properties. ARM: configs: nuvoton: add bitbang feature for npcm8xx. net: designware: Add bitbang feature for designware driver. arch/arm/dts/nuvoton-npcm845-evb.dts | 1 + configs/arbel_evb_defconfig | 4 + drivers/net/designware.c | 113 +++++++++++++++++++++++++++ drivers/net/designware.h | 6 +- 4 files changed, 123 insertions(+), 1 deletion(-) -- 2.34.1

2 4

[PATCH] pinctrl: mediatek: update mt7981 pinctrl driver based on upstream kernel
by Weijie Gao 24 Jan '25

24 Jan '25

Update mt7981 pinctrl driver based on upstream kernel Signed-off-by: Sam Shih <sam.shih(a)mediatek.com> Signed-off-by: Weijie Gao <weijie.gao(a)mediatek.com> --- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 51 ++++++++++++++++++++--- 1 file changed, 45 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7981.c b/drivers/pinctrl/mediatek/pinctrl-mt7981.c index d1c8afd9252..6b9769067b0 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c @@ -569,6 +569,11 @@ static const struct mtk_pin_desc mt7981_pins[] = { MT7981_TYPE1_PIN(56, "WF_HB10"), }; +/* List all groups consisting of these pins dedicated to the enablement of + * certain hardware block and the corresponding mode for all of the pins. + * The hardware probably has multiple combinations of these pinouts. + */ + /* WA_AICE */ static const int mt7981_wa_aice1_pins[] = { 0, 1, }; static const int mt7981_wa_aice1_funcs[] = { 2, 2, }; @@ -632,6 +637,9 @@ static const int mt7981_wo0_jtag_1_funcs[] = { 5, 5, 5, 5, 5, }; static const int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, }; static const int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, }; +static const int mt7981_uart2_0_tx_rx_pins[] = { 4, 5, }; +static const int mt7981_uart2_0_tx_rx_funcs[] = { 3, 3, }; + /* GBE_LED0 */ static const int mt7981_gbe_led0_pins[] = { 8, }; static const int mt7981_gbe_led0_funcs[] = { 3, }; @@ -718,6 +726,17 @@ static const int mt7981_drv_vbus_pins[] = { 14, }; static const int mt7981_drv_vbus_funcs[] = { 1, }; /* EMMC */ +static const int mt7981_emmc_reset_pins[] = { 15, }; +static const int mt7981_emmc_reset_funcs[] = { 2, }; + +static const int mt7981_emmc_4_pins[] = { 16, 17, 18, 19, 24, 25, }; +static const int mt7981_emmc_4_funcs[] = { 2, 2, 2, 2, 2, 2, }; + +static const int mt7981_emmc_8_pins[] = { + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, }; +static const int mt7981_emmc_8_funcs[] = { + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, }; + static const int mt7981_emmc_45_pins[] = { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, }; static const int mt7981_emmc_45_funcs[] = { @@ -754,6 +773,12 @@ static const int mt7981_uart1_0_funcs[] = { 4, 4, 4, 4, }; static const int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, }; static const int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, }; +static const int mt7981_uart1_2_pins[] = { 9, 10, }; +static const int mt7981_uart1_2_funcs[] = { 2, 2, }; + +static const int mt7981_uart1_3_pins[] = { 26, 27, }; +static const int mt7981_uart1_3_funcs[] = { 2, 2, }; + /* UART2 */ static const int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, }; static const int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, }; @@ -832,6 +857,8 @@ static const struct mtk_group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0), /* @GPIO(4,7) WM_JTAG(3) */ PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0), + /* @GPIO(4,5) WM_JTAG(4) */ + PINCTRL_PIN_GROUP("uart2_0_tx_rx", mt7981_uart2_0_tx_rx), /* @GPIO(8) GBE_LED0(3) */ PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0), /* @GPIO(4,6) PTA_EXT(4) */ @@ -844,7 +871,7 @@ static const struct mtk_group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("spi1_0", mt7981_spi1_0), /* @GPIO(6,7) I2C(5) */ PINCTRL_PIN_GROUP("i2c0_0", mt7981_i2c0_0), - /* @GPIO(8): DFD_NTRST(6) */ + /* @GPIO(0,1,4,5): DFD_NTRST(6) */ PINCTRL_PIN_GROUP("dfd_ntrst", mt7981_dfd_ntrst), /* @GPIO(9,10): WM_AICE(2) */ PINCTRL_PIN_GROUP("wm_aice1", mt7981_wm_aice1), @@ -870,6 +897,12 @@ static const struct mtk_group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("udi", mt7981_udi), /* @GPIO(14) DRV_VBUS(1) */ PINCTRL_PIN_GROUP("drv_vbus", mt7981_drv_vbus), + /* @GPIO(15): EMMC_RSTB(2) */ + PINCTRL_PIN_GROUP("emmc_reset", mt7981_emmc_reset), + /* @GPIO(16,17,18,19,24,25): EMMC_DATx, EMMC_CLK, EMMC_CMD */ + PINCTRL_PIN_GROUP("emmc_4", mt7981_emmc_4), + /* @GPIO(16,17,18,19,20,21,22,23,24,25): EMMC_DATx, EMMC_CLK, EMMC_CMD */ + PINCTRL_PIN_GROUP("emmc_8", mt7981_emmc_8), /* @GPIO(15,25): EMMC(2) */ PINCTRL_PIN_GROUP("emmc_45", mt7981_emmc_45), /* @GPIO(16,21): SNFI(3) */ @@ -888,8 +921,12 @@ static const struct mtk_group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0), /* @GPIO(26,29): UART1(2) */ PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1), + /* @GPIO(9,10): UART1(2) */ + PINCTRL_PIN_GROUP("uart1_2", mt7981_uart1_2), + /* @GPIO(26,27): UART1(2) */ + PINCTRL_PIN_GROUP("uart1_3", mt7981_uart1_3), /* @GPIO(22,25): UART2(3) */ - PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_1), + PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1), /* @GPIO(22,24) PTA_EXT(4) */ PINCTRL_PIN_GROUP("pta_ext_1", mt7981_pta_ext_1), /* @GPIO(20,21): WM_UART(4) */ @@ -964,9 +1001,10 @@ static const struct mtk_io_type_desc mt7981_io_type_desc[] = { */ static const char *const mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1", "wa_aice3", "wm_aice1_2", }; -static const char *const mt7981_uart_groups[] = { "wm_uart_0", "uart2_0", - "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2", - "uart1_0", "uart1_1", "uart2_0", "wm_aurt_1", "wm_aurt_2", "uart0", }; +static const char *const mt7981_uart_groups[] = { "net_wo0_uart_txd_0", + "net_wo0_uart_txd_1", "net_wo0_uart_txd_2", "uart0", "uart1_0", + "uart1_1", "uart1_2", "uart1_3", "uart2_0", "uart2_0_tx_rx", "uart2_1", + "wm_uart_0", "wm_aurt_1", "wm_aurt_2", }; static const char *const mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", }; static const char *const mt7981_wdt_groups[] = { "watchdog", "watchdog1", }; static const char *const mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", @@ -986,7 +1024,8 @@ static const char *const mt7981_i2c_groups[] = { "i2c0_0", "i2c0_1", static const char *const mt7981_pcm_groups[] = { "pcm", }; static const char *const mt7981_udi_groups[] = { "udi", }; static const char *const mt7981_usb_groups[] = { "drv_vbus", }; -static const char *const mt7981_flash_groups[] = { "emmc_45", "snfi", }; +static const char *const mt7981_flash_groups[] = { "emmc_reset", "emmc_4", + "emmc_8", "emmc_45", "snfi", }; static const char *const mt7981_ethernet_groups[] = { "smi_mdc_mdio", "gbe_ext_mdc_mdio", "wf0_mode1", "wf0_mode3", "mt7531_int", }; static const char *const mt7981_ant_groups[] = { "ant_sel", }; -- 2.34.1

1 0

[PATCH] scsi: do not fill the LUN in the second CDB byte
by Neil Armstrong 24 Jan '25

24 Jan '25

The SCSI specification originally required that the second Command Data Byte contain the LUN value in its high-order bits, but this field has been marked as reserved since the SCSI-3 spec from 1996. Some vendors uses this byte to pass vendor specific data, and specifying the LUN can trigger strange behaviors. For the record, this happened on an UFS device where LUN0 was working perfectly and reading the other LUNs would get the last buffer data that was read for LUN0, making this issue very very hard to debug. It's sane to assume U-Boot will probably never encounter an SCSI-2 multi-LUN device, if somehow it happens the enquiry command would need to get the SCSI level to handle this case. The Linux fix was added in [1] to fix the exact same issue. [1] https://lore.kernel.org/all/Pine.LNX.4.44L0.1409021108380.2308-100000@iolan… Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- drivers/scsi/scsi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index bcdeda95ed1514119057cc67974fec465cf5672c..cd0b84c062252118d250b9305728e03f61736600 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -38,7 +38,7 @@ void scsi_setup_read16(struct scsi_cmd *pccb, lbaint_t start, unsigned long blocks) { pccb->cmd[0] = SCSI_READ16; - pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[1] = 0; pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff; pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff; pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff; @@ -66,7 +66,7 @@ void scsi_setup_read16(struct scsi_cmd *pccb, lbaint_t start, static void scsi_setup_inquiry(struct scsi_cmd *pccb) { pccb->cmd[0] = SCSI_INQUIRY; - pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[1] = 0; pccb->cmd[2] = 0; pccb->cmd[3] = 0; if (pccb->datalen > 255) @@ -82,7 +82,7 @@ static void scsi_setup_read_ext(struct scsi_cmd *pccb, lbaint_t start, unsigned short blocks) { pccb->cmd[0] = SCSI_READ10; - pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[1] = 0; pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; @@ -103,7 +103,7 @@ static void scsi_setup_write_ext(struct scsi_cmd *pccb, lbaint_t start, unsigned short blocks) { pccb->cmd[0] = SCSI_WRITE10; - pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[1] = 0; pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; @@ -289,7 +289,7 @@ static int scsi_read_capacity(struct udevice *dev, struct scsi_cmd *pccb, memset(pccb->cmd, '\0', sizeof(pccb->cmd)); pccb->cmd[0] = SCSI_RD_CAPAC10; - pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[1] = 0; pccb->cmdlen = 10; pccb->dma_dir = DMA_FROM_DEVICE; pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ @@ -353,7 +353,7 @@ static int scsi_read_capacity(struct udevice *dev, struct scsi_cmd *pccb, static void scsi_setup_test_unit_ready(struct scsi_cmd *pccb) { pccb->cmd[0] = SCSI_TST_U_RDY; - pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[1] = 0; pccb->cmd[2] = 0; pccb->cmd[3] = 0; pccb->cmd[4] = 0; --- base-commit: a416d9e680718de1c76c4196e1db77e3ca07662f change-id: 20250124-topic-sm8x50-ufs-fix-3280b05c6e76 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

1 0

[PATCH 00/15] Cumulative fixes and updates for MediaTek platform
by Weijie Gao 24 Jan '25

24 Jan '25

This patch series contains fixes and updates for MediaTek platform, including drivers, board and arch files. Weijie Gao (15): board: mediatek: mt7622: remove board_late_init clk: mediatek: fix uninitialized fields issue in INFRA_MUX struct configs: mt7629: move image load address to 0x42000000 configs: mt7988: move image load address to 0x44000000 spi: mtk_spim: add support to use DT live tree spi: mtk_spim: check slave device mode in spi-mem's supports_op arm: dts: mediatek: add quad mode capabilities for SPI flashes pwm: mediatek: add pwm3 support for mt7981 pci: mediatek: add support for multiple ports in mediatek pcie gen3 driver arm: dts: mediatek: add pcie support for mt7988 arm: dts: medaitek: fix internal switch link speed of mt7988 arm: dts: mediatek: add support for all three GMACs for mt7988 arm: dts: medaitek: add flash interface driving settings for mt7988 arm: dts: mediatek: update mt7981 mmc node MAINTAINERS: update file list for MediaTek ARM platform MAINTAINERS | 5 + arch/arm/dts/mt7981-emmc-rfb.dts | 8 ++ arch/arm/dts/mt7981-rfb.dts | 12 ++ arch/arm/dts/mt7981-sd-rfb.dts | 14 +- arch/arm/dts/mt7981.dtsi | 22 ++-- arch/arm/dts/mt7986a-rfb.dts | 4 + arch/arm/dts/mt7986b-rfb.dts | 4 + arch/arm/dts/mt7988-rfb.dts | 59 ++++++++- arch/arm/dts/mt7988-sd-rfb.dts | 5 +- arch/arm/dts/mt7988.dtsi | 204 ++++++++++++++++++++++++++++- board/mediatek/mt7622/mt7622_rfb.c | 7 - configs/mt7629_rfb_defconfig | 2 +- configs/mt7988_rfb_defconfig | 2 +- drivers/clk/mediatek/clk-mt7981.c | 1 + drivers/clk/mediatek/clk-mt7986.c | 1 + drivers/clk/mediatek/clk-mt7988.c | 1 + drivers/pci/pcie_mediatek_gen3.c | 24 ++++ drivers/pwm/pwm-mtk.c | 2 +- drivers/spi/mtk_spim.c | 5 +- 19 files changed, 353 insertions(+), 29 deletions(-) -- 2.34.1

2 16

[PATCH 1/4] board: phytec: common: k3: Add missing boot source to env
by Daniel Schultz 24 Jan '25

24 Jan '25

We set the boot source as environment variable 'boot'. Also include 'uart' and 'usbdfu' as possible boot sources. Signed-off-by: Daniel Schultz <d.schultz(a)phytec.de> --- board/phytec/common/k3/board.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/phytec/common/k3/board.c b/board/phytec/common/k3/board.c index 9ff861cd3f4..ebdd5fb2abe 100644 --- a/board/phytec/common/k3/board.c +++ b/board/phytec/common/k3/board.c @@ -148,6 +148,12 @@ int board_late_init(void) case BOOT_DEVICE_ETHERNET: env_set("boot", "net"); break; + case BOOT_DEVICE_UART: + env_set("boot", "uart"); + break; + case BOOT_DEVICE_DFU: + env_set("boot", "usbdfu"); + break; }; if (IS_ENABLED(CONFIG_PHYTEC_SOM_DETECTION_BLOCKS)) { -- 2.25.1

3 8

[PATCH] configs: phycore_am62x_r5_defconfig: Increase SPL Malloc Pool
by Daniel Schultz 24 Jan '25

24 Jan '25

Increase the malloc pool size for the SPL by additional 4kB from 0x7000 to 0x8000. This fixes following error message: ... alloc space exhausted ptr 7028 limit 7000 DRAM init failed: -12 Signed-off-by: Daniel Schultz <d.schultz(a)phytec.de> --- configs/phycore_am62x_r5_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/phycore_am62x_r5_defconfig b/configs/phycore_am62x_r5_defconfig index a856e69d88c..c5ddcd72852 100644 --- a/configs/phycore_am62x_r5_defconfig +++ b/configs/phycore_am62x_r5_defconfig @@ -21,7 +21,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL_SYS_MALLOC_F_LEN=0x7000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL_TEXT_BASE=0x43c00000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x43c3b000 -- 2.25.1

2 1

[PATCH] board: phytec: phycore-am62x: Add DDR size fixups if ECC is enabled
by Wadim Egorov 24 Jan '25

24 Jan '25

With commit 22ce56a3ebdb ("ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve 'calculations restricted to 32 bits' issue") we need to provide the detected RAM size in the device tree node prio to K3 DDRSS driver probe. This is done by calling fdt_fixup_memory_banks() in do_board_detect(). After probing, call into k3-ddrss driver to fixup device tree and resize the available amount of DDR if ECC is enabled. A third fixup is required from A53 SPL to take the fixup as done from R5 SPL and apply it to DT passed to A53 U-boot, which in turn passes this to the OS. Signed-off-by: Wadim Egorov <w.egorov(a)phytec.de> --- board/phytec/phycore_am62x/phycore-am62x.c | 31 +++++++++++++++------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/board/phytec/phycore_am62x/phycore-am62x.c b/board/phytec/phycore_am62x/phycore-am62x.c index a0e098e010e..b199fdaa59b 100644 --- a/board/phytec/phycore_am62x/phycore-am62x.c +++ b/board/phytec/phycore_am62x/phycore-am62x.c @@ -7,6 +7,7 @@ #include <asm/arch/hardware.h> #include <asm/io.h> #include <spl.h> +#include <asm/arch/k3-ddr.h> #include <fdt_support.h> #include "phycore-ddr-data.h" @@ -97,6 +98,8 @@ int dram_init_banksize(void) { u8 ram_size; + memset(gd->bd->bi_dram, 0, sizeof(gd->bd->bi_dram[0]) * CONFIG_NR_DRAM_BANKS); + if (!IS_ENABLED(CONFIG_CPU_V7R)) return fdtdec_setup_memory_banksize(); @@ -178,17 +181,11 @@ int update_ddrss_timings(void) int do_board_detect(void) { - return update_ddrss_timings(); -} -#endif - -#if IS_ENABLED(CONFIG_XPL_BUILD) -void spl_perform_fixups(struct spl_image_info *spl_image) -{ + int ret; + void *fdt = (void *)gd->fdt_blob; + int bank; u64 start[CONFIG_NR_DRAM_BANKS]; u64 size[CONFIG_NR_DRAM_BANKS]; - int bank; - int ret; dram_init(); dram_init_banksize(); @@ -198,7 +195,21 @@ void spl_perform_fixups(struct spl_image_info *spl_image) size[bank] = gd->bd->bi_dram[bank].size; } - ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, CONFIG_NR_DRAM_BANKS); + ret = fdt_fixup_memory_banks(fdt, start, size, CONFIG_NR_DRAM_BANKS); + if (ret) + return ret; + + return update_ddrss_timings(); +} +#endif + +#if IS_ENABLED(CONFIG_XPL_BUILD) +void spl_perform_fixups(struct spl_image_info *spl_image) +{ + if (IS_ENABLED(CONFIG_K3_DDRSS) && IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + else + fixup_memory_node(spl_image); } #endif -- 2.34.1

2 1

Pull request: u-boot-sunxi/master for 2025.04
by Andre Przywara 24 Jan '25

24 Jan '25

Hi Tom, please pull sunxi changes for this cycle: Following the move of the H616 family to OF_UPSTREAM in the last cycle, now some older SoCs with identical DTs follow the lead: the F1C100s, A10, A10s, A13. The remaining SoCs suffer from that IRQ cells incompatiblity, breaking support for Linux < v5.13, so I am holding their move back still. Otherwise we get proper support for the PinePhone v1.2, and PSTORE support for all revisions of that device. This is rounded up by a PMIC related fix for some A80 boards, and two cleanup patches that are preparations for two new SoCs families, being worked on as we speak. But they have to wait for the next cycle. Gitlab CI passed, and I booted that briefly on some boards. Thanks, Andre =========================================================== The following changes since commit 2eed5a1ff36217372e19f7513bd07077fc76718a: Merge https://source.denx.de/u-boot/custodians/u-boot-snapdragon (2025-01-22 11:23:35 -0600) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master for you to fetch changes up to 73cbb3baa6ae26dc8693feb449f48a535292e7e5: sunxi: switch Allwinner A10s/A13 boards to OF_UPSTREAM (2025-01-22 22:49:15 +0000) ---------------------------------------------------------------- Andre Przywara (6): sunxi: clock: improve grouping of default clock register values sunxi: H616: DRAM: rename Kconfig parameters to be more generic power: pmic: sunxi: guard DCDC5 separately suniv: switch Allwinner F1Cx00 boards to OF_UPSTREAM sunxi: switch Allwinner A10 boards to OF_UPSTREAM sunxi: switch Allwinner A10s/A13 boards to OF_UPSTREAM Andrey Skvortsov (2): sunxi: defconfig: Add pstore support for pinephone sunxi: pinephone: detect existed magnetometer and fixup dtb arch/arm/dts/Makefile | 48 +- arch/arm/dts/sun4i-a10-a1000.dts | 255 ----- arch/arm/dts/sun4i-a10-ba10-tvbox.dts | 151 --- arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 159 --- arch/arm/dts/sun4i-a10-cubieboard.dts | 255 ----- arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts | 218 ---- arch/arm/dts/sun4i-a10-gemei-g9.dts | 192 ---- arch/arm/dts/sun4i-a10-hackberry.dts | 140 --- arch/arm/dts/sun4i-a10-hyundai-a7hd.dts | 115 -- arch/arm/dts/sun4i-a10-inet1.dts | 229 ---- arch/arm/dts/sun4i-a10-inet97fv2.dts | 203 ---- arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 357 ------ arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts | 126 -- arch/arm/dts/sun4i-a10-jesurun-q5.dts | 181 --- arch/arm/dts/sun4i-a10-marsboard.dts | 182 --- arch/arm/dts/sun4i-a10-mini-xplus.dts | 144 --- arch/arm/dts/sun4i-a10-mk802.dts | 144 --- arch/arm/dts/sun4i-a10-mk802ii.dts | 111 -- arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 225 ---- arch/arm/dts/sun4i-a10-pcduino.dts | 200 ---- arch/arm/dts/sun4i-a10-pcduino2.dts | 67 -- arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 206 ---- arch/arm/dts/sun4i-a10-topwise-a721.dts | 242 ---- arch/arm/dts/sun4i-a10.dtsi | 1271 --------------------- arch/arm/dts/sun5i-a10s-auxtek-t003.dts | 137 --- arch/arm/dts/sun5i-a10s-auxtek-t004.dts | 149 --- arch/arm/dts/sun5i-a10s-mk802.dts | 127 -- arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 272 ----- arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts | 118 -- arch/arm/dts/sun5i-a10s-wobo-i5.dts | 195 ---- arch/arm/dts/sun5i-a10s.dtsi | 173 --- arch/arm/dts/sun5i-a13-difrnce-dit4350.dts | 50 - arch/arm/dts/sun5i-a13-empire-electronix-d709.dts | 190 --- arch/arm/dts/sun5i-a13-empire-electronix-m712.dts | 51 - arch/arm/dts/sun5i-a13-hsg-h702.dts | 182 --- arch/arm/dts/sun5i-a13-inet-98v-rev2.dts | 50 - arch/arm/dts/sun5i-a13-licheepi-one.dts | 214 ---- arch/arm/dts/sun5i-a13-olinuxino-micro.dts | 141 --- arch/arm/dts/sun5i-a13-olinuxino.dts | 247 ---- arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts | 258 ----- arch/arm/dts/sun5i-a13-q8-tablet.dts | 80 -- arch/arm/dts/sun5i-a13-utoo-p66.dts | 116 -- arch/arm/dts/sun5i-a13.dtsi | 118 -- arch/arm/dts/sun5i-gr8-chip-pro.dts | 238 ---- arch/arm/dts/sun5i-gr8-evb.dts | 333 ------ arch/arm/dts/sun5i-gr8.dtsi | 126 -- arch/arm/dts/sun5i-r8-chip.dts | 282 ----- arch/arm/dts/sun5i-r8.dtsi | 47 - arch/arm/dts/sun5i-reference-design-tablet.dtsi | 194 ---- arch/arm/dts/sun5i.dtsi | 819 ------------- arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 73 -- arch/arm/dts/suniv-f1c100s.dtsi | 330 ------ arch/arm/dts/suniv-f1c200s-lctech-pi.dts | 76 -- arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts | 81 -- arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h | 18 +- arch/arm/mach-sunxi/Kconfig | 61 +- arch/arm/mach-sunxi/dram_sun50i_h616.c | 26 +- board/sunxi/board.c | 27 +- configs/A10-OLinuXino-Lime_defconfig | 2 +- configs/A10s-OLinuXino-M_defconfig | 2 +- configs/A13-OLinuXinoM_defconfig | 2 +- configs/A13-OLinuXino_defconfig | 2 +- configs/Ampe_A76_defconfig | 1 + configs/Auxtek-T003_defconfig | 2 +- configs/Auxtek-T004_defconfig | 2 +- configs/CHIP_defconfig | 2 +- configs/CHIP_pro_defconfig | 2 +- configs/Chuwi_V7_CW0825_defconfig | 2 +- configs/Cubieboard_defconfig | 2 +- configs/Empire_electronix_d709_defconfig | 2 +- configs/Empire_electronix_m712_defconfig | 2 +- configs/Hyundai_A7HD_defconfig | 2 +- configs/Linksprite_pcDuino_defconfig | 2 +- configs/Marsboard_A10_defconfig | 2 +- configs/Mele_A1000_defconfig | 2 +- configs/Mini-X_defconfig | 2 +- configs/UTOO_P66_defconfig | 2 +- configs/Wobo_i5_defconfig | 2 +- configs/anbernic_rg35xx_h700_defconfig | 20 +- configs/ba10_tv_box_defconfig | 2 +- configs/difrnce_dit4350_defconfig | 2 +- configs/dserve_dsrv9703c_defconfig | 2 +- configs/iNet_3F_defconfig | 1 + configs/iNet_3W_defconfig | 1 + configs/iNet_86VS_defconfig | 1 + configs/inet1_defconfig | 2 +- configs/inet97fv2_defconfig | 2 +- configs/inet98v_rev2_defconfig | 2 +- configs/inet9f_rev03_defconfig | 2 +- configs/jesurun_q5_defconfig | 2 +- configs/lctech_pi_f1c200s_defconfig | 2 +- configs/licheepi_nano_defconfig | 2 +- configs/mk802_a10s_defconfig | 2 +- configs/mk802_defconfig | 2 +- configs/mk802ii_defconfig | 2 +- configs/orangepi_zero2_defconfig | 8 +- configs/orangepi_zero2w_defconfig | 16 +- configs/orangepi_zero3_defconfig | 16 +- configs/pinephone_defconfig | 3 + configs/pov_protab2_ips9_defconfig | 2 +- configs/q8_a13_tablet_defconfig | 2 +- configs/r7-tv-dongle_defconfig | 2 +- configs/sunxi_Gemei_G9_defconfig | 2 +- configs/tanix_tx1_defconfig | 16 +- configs/transpeed-8k618-t_defconfig | 14 +- configs/x96_mate_defconfig | 14 +- 106 files changed, 172 insertions(+), 11031 deletions(-) delete mode 100644 arch/arm/dts/sun4i-a10-a1000.dts delete mode 100644 arch/arm/dts/sun4i-a10-ba10-tvbox.dts delete mode 100644 arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts delete mode 100644 arch/arm/dts/sun4i-a10-cubieboard.dts delete mode 100644 arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts delete mode 100644 arch/arm/dts/sun4i-a10-gemei-g9.dts delete mode 100644 arch/arm/dts/sun4i-a10-hackberry.dts delete mode 100644 arch/arm/dts/sun4i-a10-hyundai-a7hd.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet1.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet97fv2.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet9f-rev03.dts delete mode 100644 arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts delete mode 100644 arch/arm/dts/sun4i-a10-jesurun-q5.dts delete mode 100644 arch/arm/dts/sun4i-a10-marsboard.dts delete mode 100644 arch/arm/dts/sun4i-a10-mini-xplus.dts delete mode 100644 arch/arm/dts/sun4i-a10-mk802.dts delete mode 100644 arch/arm/dts/sun4i-a10-mk802ii.dts delete mode 100644 arch/arm/dts/sun4i-a10-olinuxino-lime.dts delete mode 100644 arch/arm/dts/sun4i-a10-pcduino.dts delete mode 100644 arch/arm/dts/sun4i-a10-pcduino2.dts delete mode 100644 arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts delete mode 100644 arch/arm/dts/sun4i-a10-topwise-a721.dts delete mode 100644 arch/arm/dts/sun4i-a10.dtsi delete mode 100644 arch/arm/dts/sun5i-a10s-auxtek-t003.dts delete mode 100644 arch/arm/dts/sun5i-a10s-auxtek-t004.dts delete mode 100644 arch/arm/dts/sun5i-a10s-mk802.dts delete mode 100644 arch/arm/dts/sun5i-a10s-olinuxino-micro.dts delete mode 100644 arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts delete mode 100644 arch/arm/dts/sun5i-a10s-wobo-i5.dts delete mode 100644 arch/arm/dts/sun5i-a10s.dtsi delete mode 100644 arch/arm/dts/sun5i-a13-difrnce-dit4350.dts delete mode 100644 arch/arm/dts/sun5i-a13-empire-electronix-d709.dts delete mode 100644 arch/arm/dts/sun5i-a13-empire-electronix-m712.dts delete mode 100644 arch/arm/dts/sun5i-a13-hsg-h702.dts delete mode 100644 arch/arm/dts/sun5i-a13-inet-98v-rev2.dts delete mode 100644 arch/arm/dts/sun5i-a13-licheepi-one.dts delete mode 100644 arch/arm/dts/sun5i-a13-olinuxino-micro.dts delete mode 100644 arch/arm/dts/sun5i-a13-olinuxino.dts delete mode 100644 arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts delete mode 100644 arch/arm/dts/sun5i-a13-q8-tablet.dts delete mode 100644 arch/arm/dts/sun5i-a13-utoo-p66.dts delete mode 100644 arch/arm/dts/sun5i-a13.dtsi delete mode 100644 arch/arm/dts/sun5i-gr8-chip-pro.dts delete mode 100644 arch/arm/dts/sun5i-gr8-evb.dts delete mode 100644 arch/arm/dts/sun5i-gr8.dtsi delete mode 100644 arch/arm/dts/sun5i-r8-chip.dts delete mode 100644 arch/arm/dts/sun5i-r8.dtsi delete mode 100644 arch/arm/dts/sun5i-reference-design-tablet.dtsi delete mode 100644 arch/arm/dts/sun5i.dtsi delete mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts delete mode 100644 arch/arm/dts/suniv-f1c100s.dtsi delete mode 100644 arch/arm/dts/suniv-f1c200s-lctech-pi.dts delete mode 100644 arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts

2 1

[PATCH v5 0/5] efi: Start to chip away at the EFI workaround
by Simon Glass 23 Jan '25

23 Jan '25

At present there is a function, efi_set_bootdev(), which is used in various places to tell the EFI loader which device a file came from. With bootstd, this information is available in the bootflow. This little series provides a way for bootstd to provide the bootflow to the EFI loader, so that it is able to select the correct paths. For now only the EFI bootmeth is updated. Changes in v5: - Rename the parameters - Drop the image->image_ptr rename - Rename _efi_binary_run() to efi_binary_run_dp() - Rebase on earlier changes - Rebase on earlier change Changes in v3: - Rename efi_binary_run_() to _efi_binary_run() - Add new patch to support PXE booting - Rebase on Tom's tree (i.e. without the pointers/addresses series) https://patchwork.ozlabs.org/project/uboot/list/?series=436241 Changes in v2: - Adjust argument ordering for efi_run_image() - Use efi_loader tag instead of efi - Drop unnecessary path removal - Fix 'require' typo - Move calculation of dev-name into a separate function Simon Glass (5): efi_loader: Update efi_run_image() to accept image and device path efi_loader: Add a version of efi_binary_run() with more parameters efi_loader: Move the fallback code from efi_run_image() efi_loader: Pass in the required parameters from EFI bootmeth bootmeth_efi: Support PXE booting boot/bootmeth_efi.c | 64 +----------- include/efi_loader.h | 10 ++ lib/efi_loader/efi_bootbin.c | 189 +++++++++++++++++++++++++++-------- 3 files changed, 160 insertions(+), 103 deletions(-) -- 2.43.0

1 5

[PATCH] mmc: sdhci: Fix possible Synchronous Abort using PIO mode
by Jonas Karlman 23 Jan '25

23 Jan '25

When MMC_SDHCI_SDMA=y or MMC_SDHCI_ADMA=y and PIO mode is used dma_unmap_single() is called on an unmapped address, 0x0. This may result in a Synchronous Abort: ## Checking hash(es) for Image atf-1 ... sha256+ OK CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00004005 "Synchronous Abort" handler, esr 0x96000147 elr: 00000000400015bc lr : 0000000040012b4c x 0: 0000000000008000 x 1: 0000000000092600 x 2: 0000000000000040 x 3: 000000000000003f x 4: 0000000000000030 x 5: 0000000000000001 x 6: 0000000000000001 x 7: 0000000000000000 x 8: 000000000000000a x 9: 0000000000000090 x10: 0000000043dffc68 x11: 0000000043c00440 x12: 0000000043c00440 x13: ffffffffbfe00000 x14: 000000000000031c x15: 0000000240000000 x16: 000000004001145c x17: 0000000000000032 x18: 0000000043dffef0 x19: 0000000043c00000 x20: 0000000043dffbc8 x21: 0000000000000000 x22: 00000000000f3d95 x23: 0000000000000002 x24: 0000000000000493 x25: 0000000000092600 x26: 0000000000000001 x27: 0000000000000001 x28: 0000000000000008 x29: 0000000043dffab0 Code: d2800082 9ac32042 d1000443 8a230000 (d5087620) Resetting CPU ... resetting ... Fix this by only dma_unmap_single() when DMA mode is used and sdhci_prepare_dma() has been called to map host->start_addr. Signed-off-by: Jonas Karlman <jonas(a)kwiboo.se> --- drivers/mmc/sdhci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 4833b5158c79..dc7f0724a7b6 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -177,8 +177,10 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data) } while (!(stat & SDHCI_INT_DATA_END)); #if (CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)) - dma_unmap_single(host->start_addr, data->blocks * data->blocksize, - mmc_get_dma_dir(data)); + if (host->flags & USE_DMA) { + dma_unmap_single(host->start_addr, data->blocks * data->blocksize, + mmc_get_dma_dir(data)); + } #endif return 0; -- 2.48.1

1 0