September 2024 - U-Boot

[PATCH v3 0/3] This series adds a few patches to make it easy to use the system dtc in
by Simon Glass 15 Oct '24

15 Oct '24

buildman. It updates CI to do this for world builds, to save time. It also includes an old patch which is now needed again since: e13fcae3fce Revert "buildman: Always use the full path in... Changes in v3: - Drop patches previously applied - Add dtc patches Changes in v2: - Fix 'envronment' typo Simon Glass (3): buildman: Support building within a Python venv buildman: Allow skipping the dtc build RFC: CI: Skip building dtc for world builds .azure-pipelines.yml | 2 +- .gitlab-ci.yml | 8 +-- tools/buildman/bsettings.py | 3 + tools/buildman/builder.py | 27 +++++++- tools/buildman/builderthread.py | 4 +- tools/buildman/buildman.rst | 3 + tools/buildman/cmdline.py | 2 + tools/buildman/control.py | 3 +- tools/buildman/test.py | 115 ++++++++++++++++++++++++++++++++ tools/buildman/toolchain.py | 31 +++++++-- 10 files changed, 185 insertions(+), 13 deletions(-) -- 2.34.1

2 26

[PATCH v2 00/11] drivers: Driver support for ADI SC5xx SoCs
by Oliver Gaskell via B4 Relay 14 Oct '24

14 Oct '24

This series adds all of the supported peripheral drivers for the sc5xx series of SoCs from Analog Devices and other drivers that are used by the evaluation kits, such as a GPIO expander used by the EZLITE carrier boards. This series is based on my earlier patch series: "arm: Initial support for Analog Devices SC5xx boards" 20240828-sc5xx-upstreaming-patches-v1-0-44d9adfdf327(a)analog.com since both that series and this series modify MAINTAINERS. Note that patches 05, 07 had Reviewed-by tags, but have had minor changes since v1 so these weren't kept. Signed-off-by: Oliver Gaskell <Oliver.Gaskell(a)analog.com> --- Changes in v2: - Address comments on adi_spi3.c - Clean up some whitespace errors - Modify Kconfigs to reflect changes to mach-sc5xx/Kconfig - Link to v1: https://lore.kernel.org/r/20240515215837.14028-1-greg.malysa@timesys.com --- Greg Malysa (2): net: Add support for ADI SC5xx SoCs with DWC QoS ethernet dma: Add driver for ADI SC5xx-family SoC MDMA functionality Nathan Barrett-Morrison (3): gpio: Add support for ADI ADP5588 GPIO expander chips usb: musb-new: Add support for Analog Devices SC5xx SoCs remoteproc: Add in SHARC loading for ADI SC5XX-family processors Oliver Gaskell (6): pinctrl: Add support for ADI SC5XX-family pinctrl gpio: Add support for SC5XX-family processor GPIO driver i2c: Add support for ADI SC5XX-family I2C peripheral watchdog: Add support for ADI SC5XX-family watchdog peripheral spi: Add support for ADI SC5XX-family processor SPI peripherals mmc: Add support for ADI SC5XX-family processor SDHCI peripherals MAINTAINERS | 11 + drivers/dma/Kconfig | 7 + drivers/dma/Makefile | 1 + drivers/dma/adi_dma.c | 255 ++++++++++++ drivers/gpio/Kconfig | 17 + drivers/gpio/Makefile | 2 + drivers/gpio/adp5588_gpio.c | 208 ++++++++++ drivers/gpio/gpio-adi-adsp.c | 179 +++++++++ drivers/i2c/Kconfig | 7 + drivers/i2c/Makefile | 1 + drivers/i2c/adi_i2c.c | 395 +++++++++++++++++++ drivers/mmc/Kconfig | 9 + drivers/mmc/Makefile | 1 + drivers/mmc/adi_sdhci.c | 154 ++++++++ drivers/net/Kconfig | 7 + drivers/net/Makefile | 1 + drivers/net/dwc_eth_qos.c | 6 + drivers/net/dwc_eth_qos.h | 2 + drivers/net/dwc_eth_qos_adi.c | 102 +++++ drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-adi-adsp.c | 156 ++++++++ drivers/remoteproc/Kconfig | 11 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/adi_sc5xx_rproc.c | 276 +++++++++++++ drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/adi_spi3.c | 690 +++++++++++++++++++++++++++++++++ drivers/usb/musb-new/Kconfig | 7 + drivers/usb/musb-new/Makefile | 1 + drivers/usb/musb-new/sc5xx.c | 202 ++++++++++ drivers/watchdog/Kconfig | 9 + drivers/watchdog/Makefile | 1 + drivers/watchdog/adi_wdt.c | 145 +++++++ include/dt-bindings/pinctrl/adi-adsp.h | 21 + 35 files changed, 2902 insertions(+) --- base-commit: 041bf69038e2957f38e2de4e5d77bdb3e2ccf8a8 change-id: 20240923-sc5xx-driver-series-a9afb7c598bc prerequisite-message-id: 20240828-sc5xx-upstreaming-patches-v1-0-44d9adfdf327(a)analog.com prerequisite-patch-id: 63cec707680793ef2feeb5b782b1db19d49766ce prerequisite-patch-id: fbc3b9227e2dc550878d4e8d113b1ad81ee00028 prerequisite-patch-id: 988919879c6440227124dc0bb4b24d22c9041d99 prerequisite-patch-id: 469d6193e82a2f702e938004ad6ff7c22dfbab86 prerequisite-patch-id: 184667bccb34335a943f5ba405bf2acd75b8c7f3 prerequisite-patch-id: aad9a1786ecfe51a46034fc055c57bff62d2a653 prerequisite-patch-id: 909e13e6d779858f6d862b703e7cbfe510cb3a16 prerequisite-patch-id: 8101423151112c3876c88223ac9ab196aebb8912 prerequisite-patch-id: 24787a90e7adadab2ae3aa2348ac9d5838c26cfe prerequisite-patch-id: 0564b8079526f2fe1d9f723c8c4a2471e3ec6e1c prerequisite-patch-id: 0ca62b4ff0cfd3bf5a10ac84f13d0ab261e737d1 prerequisite-patch-id: f54e027ac323522349f24acbc4a946d8a3cdfaef prerequisite-patch-id: 6f85ade3b9119dba85b65da8a49c4a6345c6b3ba prerequisite-patch-id: 94e1c6fde429c63a6fa4f7b5aeab0df9a8a00d81 prerequisite-patch-id: 3227e7bdc2614c377b6837a47ad1cde99791d794 prerequisite-patch-id: f6a45739e56120f54170b924a3069b98d355d1c0 prerequisite-patch-id: 10f9f40c697f22a33b83a8538e13bac642795851 prerequisite-patch-id: 32d268fd6372bda3129cddd26da45d69291efc33 prerequisite-patch-id: 7640097fdc5a25ec2ffdf0eddb22f3c452510390 prerequisite-patch-id: e57e6a95ef319c12565a6469f230198259f0bf7d Best regards, -- Oliver Gaskell <Oliver.Gaskell(a)analog.com>

3 14

[PATCH] cmd/mem.c: fix undefined behavior in mem cmp
by Quentin Schulz 14 Oct '24

14 Oct '24

From: Quentin Schulz <quentin.schulz(a)cherry.de> My linter complains that "When using void pointers in calculations, the behaviour is undefined". GCC does say that "In GNU C, addition and subtraction operations are supported on pointers to void"[1] but this hints at this only being supported in the GNU flavor of C. And I assume U-Boot may want to be compiled with clang/llvm? Let's fix that warning by casting the void pointer to a u8 pointer since the size variable unit is byte. [1] https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html Fixes: 0628ab8ec598 ("sandbox: Change memory commands to use map_physmem") Signed-off-by: Quentin Schulz <quentin.schulz(a)cherry.de> --- cmd/mem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/cmd/mem.c b/cmd/mem.c index 274348068c2..08ec0aefa7d 100644 --- a/cmd/mem.c +++ b/cmd/mem.c @@ -293,8 +293,8 @@ static int do_mem_cmp(struct cmd_tbl *cmdtp, int flag, int argc, break; } - buf1 += size; - buf2 += size; + buf1 = ((u8 *)buf1) + size; + buf2 = ((u8 *)buf2) + size; /* reset watchdog from time to time */ if ((ngood % (64 << 10)) == 0) --- base-commit: 56b47b8b6a09c777e74fe6c52512c832691169aa change-id: 20240927-cmd-mem-undefined-a4368d58b5b6 Best regards, -- Quentin Schulz <quentin.schulz(a)cherry.de>

3 4

[PATCH] doc: blkmap: Fix typo in command example
by Ken Kurematsu 14 Oct '24

14 Oct '24

Fixed a variable that was incorrect during the calculation of fileblks. Signed-off-by: Ken Kurematsu <k.kurematsu(a)nskint.co.jp> --- doc/usage/blkmap.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/usage/blkmap.rst b/doc/usage/blkmap.rst index 7337ea507a..75f736c259 100644 --- a/doc/usage/blkmap.rst +++ b/doc/usage/blkmap.rst @@ -54,7 +54,7 @@ downloaded file, in blocks: :: setexpr fileblks ${filesize} + 0x1ff - setexpr fileblks ${filesize} / 0x200 + setexpr fileblks ${fileblks} / 0x200 Then we can add a mapping to the start of our device, backed by the memory at `${loadaddr}`: -- 2.34.1

2 1

phy: Fix db410c crash issue during usb_stop
by JianfengA.Zhu＠sony.com 14 Oct '24

14 Oct '24

usb stop crash log ==================================================================== dragonboard410c => usb start starting USB... Bus usb@78d9000: USB EHCI 1.00 scanning bus usb@78d9000 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found dragonboard410c => usb stop stopping USB.. "Synchronous Abort" handler, esr 0x96000007, far 0x0 elr: 000000008f636a28 lr : 000000008f636a24 (reloc) elr: 00000000bd97ea28 lr : 00000000bd97ea24 x0 : 0000000000000000 x1 : 00000000bd1494d0 x2 : 0000000000000000 x3 : 0000000000001f40 x4 : 00000000bd131990 x5 : 00000000bd157b70 x6 : 0000000000000041 x7 : 00000000bd163b80 x8 : 00000000bd131db0 x9 : 000000000000b65c x10: 00000000bd13183c x11: 0000000000000006 x12: 000000000001869f x13: 0000000000000061 x14: 00000000ffffffff x15: 00000000bd1317b8 x16: 00000000bd9b78ac x17: 0000000000000000 x18: 00000000bd143d90 x19: 00000000bd1575d8 x20: 00000000bd1575d8 x21: 00000000bd157440 x22: 00000000bd1493b0 x23: 0000000000000002 x24: 00000000bd9eb910 x25: 0000000000000000 x26: 0000000000000000 x27: 0000000000000000 x28: 00000000bd158540 x29: 00000000bd131980 Code: f9400000 b4000120 97ffdd1e aa0003e2 (f9400001) Resetting CPU ... resetting ... ==================================================================== After commit ed8fbd2889fc ("dts: msm8916: replace with upstream DTS") msm8916_usbphy will be defined as a child device of usb@78d9000. When calling usb stop, usb@78d9000 will be removed. During the removal process, the sub-device msm8916_usbphy will be removed first. In the subsequent remove process, the uclass_priv_ of msm8916_usbphy will be accessed again. Because uclass_priv_ is NULL at this time, it will cause a crash. Detailed calling process ==================================================================== usb_stop (drivers/usb/host/usb-uclass.c) |-> device_remove(bus, DM_REMOVE_NORMAL); <== remove ehci_msm .|-> device_chld_remove <== remove msm8916_usbphy . |-> device_remove . |-> device_free(dev); . |-> dev_set_uclass_priv(dev, NULL); . |-> dev->uclass_priv_ = uclass_priv; <== uclass_priv is NULL |-> drv->remove(dev); |-> ehci_usb_remove |-> generic_shutdown_phy |-> generic_shutdown_phy |-> phy_get_counts |-> dev_get_uclass_priv |-> dm_priv_to_rw(dev->uclass_priv_); <== NULL pointer access ==================================================================== Fix: move usb phy power off into msm8916_usbphy remove. Signed-off-by: Jianfeng Zhu <JianfengA.Zhu(a)sony.com> Reviewed-by: Jacky Cao <Jacky.Cao(a)sony.com> Reviewed-by: Toyama, Yoshihiro <Yoshihiro.Toyama(a)sony.com> --- drivers/phy/qcom/msm8916-usbh-phy.c | 20 ++++++++++++++++++++ drivers/usb/host/ehci-msm.c | 4 ---- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/phy/qcom/msm8916-usbh-phy.c b/drivers/phy/qcom/msm8916-usbh-phy.c index 4b435aa2a6..0ba520c93d 100644 --- a/drivers/phy/qcom/msm8916-usbh-phy.c +++ b/drivers/phy/qcom/msm8916-usbh-phy.c @@ -46,6 +46,25 @@ static int msm_phy_power_off(struct phy *phy) return 0; } +static int msm_phy_remove(struct udevice *dev) +{ + struct phy phy; + int ret; + + ret = generic_phy_get_by_index(dev->parent, 0, &phy); + if (ret) + return ret; + + /* To avoid NULL pointer access exception issue, move + * generic_shutdown_phy from ehci_usb_remove to here + */ + ret = generic_shutdown_phy(&phy); + if (ret) + return ret; + + return 0; +} + static int msm_phy_reset(struct phy *phy) { struct msm_phy_priv *p = dev_get_priv(phy->dev); @@ -105,5 +124,6 @@ U_BOOT_DRIVER(msm8916_usbphy) = { .of_match = msm_phy_ids, .ops = &msm_phy_ops, .probe = msm_phy_probe, + .remove = msm_phy_remove, .priv_auto = sizeof(struct msm_phy_priv), }; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index ff336082e3..565859e806 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -114,10 +114,6 @@ static int ehci_usb_remove(struct udevice *dev) clk_disable_unprepare(&p->iface_clk); clk_disable_unprepare(&p->core_clk); - ret = generic_shutdown_phy(&p->phy); - if (ret) - return ret; - ret = board_usb_init(0, USB_INIT_DEVICE); /* Board specific hook */ if (ret < 0) return ret; -- 2.25.1

2 2

[PATCH v2] mtd: nand: raw: atmel: Use ONFI ECC params if available
by Zixun LI 14 Oct '24

14 Oct '24

When ECC parameters are not specified in DT, first try ONFI ECC parameters before fallback to maximum strength. It's the Linux driver behavior since the driver rewriting in f88fc12. >From then 2 nand system refactors have been done in 6a1b66d6 and 53576c7b, chip->ecc_strength_ds and chip->ecc_step_ds became nanddev_get_ecc_requirements(). U-Boot didn't follow the refactor and always use these 2 fields. v2: Fix formatting, add upstream commit hash. Signed-off-by: Zixun LI <zli(a)ogga.fr> --- drivers/mtd/nand/raw/atmel/nand-controller.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index ee4ec6da58..817fab4ca3 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -1029,11 +1029,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip) req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH; else if (chip->ecc.strength) req.ecc.strength = chip->ecc.strength; + else if (chip->ecc_strength_ds) + req.ecc.strength = chip->ecc_strength_ds; else req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH; if (chip->ecc.size) req.ecc.sectorsize = chip->ecc.size; + else if (chip->ecc_step_ds) + req.ecc.sectorsize = chip->ecc_step_ds; else req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO; -- 2.45.2

4 5

[PATCH 0/4] ufs: add support for Qualcomm UFS Controller
by Neil Armstrong 14 Oct '24

14 Oct '24

This iass Add Support for the Host Controller driver for UFS HC present on Qualcomm Snapdragon SoCs. It adds 2 ops to allow more control on the UFS device. It has been successfully tested on SDM845, SM8250, SM8550 ant SM8650 SoCs. It builds-depends on the following serie: https://lore.kernel.org/all/20240910-topic-ufs-enhancements-v1-0-3ee0bffacc… And at runtime it depends on: https://lore.kernel.org/all/20240910-topic-ufs-qcom-phy-v1-0-21ff4b87b962@l… Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- Bhupesh Sharma (1): ufs: Add Support for Qualcomm UFS HC driver Neil Armstrong (3): ufs: add device_reset callback ufs: add get_max_pwr_mode callback ufs: allow UFSHCI version 4.0 drivers/ufs/Kconfig | 7 + drivers/ufs/Makefile | 1 + drivers/ufs/ufs-qcom.c | 670 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ufs/ufs-qcom.h | 147 +++++++++++ drivers/ufs/ufs.c | 13 +- drivers/ufs/ufs.h | 21 ++ drivers/ufs/unipro.h | 6 + 7 files changed, 863 insertions(+), 2 deletions(-) --- base-commit: 7725e4eb07c03ca0842b0a7ed425af28e1b8ed37 change-id: 20240910-topic-ufs-qcom-controller-4b2905610963 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

4 8

[PATCH v2 0/3] Add AMD UFS platfrom driver support
by Venkatesh Yadav Abbarapu 14 Oct '24

14 Oct '24

Enable UFS DWC controller driver support and add AMD UFS platform driver support. NOTE: These changes are rebased on top of this series [PATCH 00/13] ufs: enhancements to support Qualcomm UFS controllers Changes in v2: - Removed the ufshcd_vops_phy_initialization function. - Removed the ufshcd_set_link_active function. Venkatesh Yadav Abbarapu (3): ufs: add support for DesignWare Controller ufs: ufs-amd-versal2: Add support for AMD UFS controller configs: versal2: Add support for AMD UFS platform driver configs/amd_versal2_virt_defconfig | 2 +- drivers/ufs/Kconfig | 8 + drivers/ufs/Makefile | 1 + drivers/ufs/ufs-amd-versal2.c | 501 +++++++++++++++++++++++++++++ drivers/ufs/ufshcd-dwc.c | 133 ++++++++ drivers/ufs/ufshcd-dwc.h | 69 ++++ drivers/ufs/ufshci-dwc.h | 32 ++ drivers/ufs/unipro.h | 1 + 8 files changed, 746 insertions(+), 1 deletion(-) create mode 100644 drivers/ufs/ufs-amd-versal2.c create mode 100644 drivers/ufs/ufshcd-dwc.c create mode 100644 drivers/ufs/ufshcd-dwc.h create mode 100644 drivers/ufs/ufshci-dwc.h -- 2.17.1

4 6

[PATCH v3 00/13] ufs: enhancements to support Qualcomm UFS controllers
by Neil Armstrong 14 Oct '24

14 Oct '24

This serie regroups all the fixes and base enhancements required to support the Qualcomm UFS controllers in U-Boot. This syncs headers & defines from Linux, and includes 2 set of fixes that were sent separately: - ufs: core: remove link_startup_again logic - ufs: properly fix cache operations Without those 2 sets, UFS cannot initialize on Qualcomm controlers since v5, and a numerous of Cache issues makes any UFS controller fail to initialize. Since UFS core hasn't changed for a while, and since UFS is core technology for the Qualcomm SoCs, I volunteer maintaininig the UFS subsystem if Bhupesh & Neha Malcom Francis are ok with that. It has been reported to show regressions on: - TI K3 platforms (j721s2, j721e, j7200, j784s4) [1] - AMD platform (amd_versal2_virt_defconfig) [2] [1] https://lore.kernel.org/all/38f599a8-7094-4a04-8ff6-96fc8b9d168a@ti.com/ [2] https://lore.kernel.org/all/SA1PR12MB869713CA620F99077B75EF0E98632@SA1PR12M… Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- Changes in v3: - Fixup patch 9 - Link to v2: https://lore.kernel.org/r/20240920-topic-ufs-enhancements-v2-0-65ae61e73eaa… Changes in v2: - Added review and tested-by tags - Updated patch 12 message with more explanations - Synced patch 9 again with Linux 6.11 - Updated patches 7, 8, 9 and 10 with informations about the origins of the changes - Link to v1: https://lore.kernel.org/r/20240910-topic-ufs-enhancements-v1-0-3ee0bffacc64… --- Bhupesh Sharma (5): ufs/ufs.h: Add definition of 'ufshcd_rmwl()' ufs: Clear UECPA once due to LINERESET has happened during LINK_STARTUP ufs: Sync possible UFS Quirks with Linux UFS driver ufs: Add missing memory barriers ufs: Fix debug message in 'ufs_start' Marek Vasut (2): ufs: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS ufs: Add UFSHCD_QUIRK_HIBERN_FASTAUTO Neil Armstrong (6): ufs: allocate descriptors with size aligned with DMA_MINALIGN ufs: fix dcache flush and invalidate range calculation ufs: split flush and invalidate to only invalidate when required ufs: use dcache helpers for scsi_cmd data and only invalidate if necessary ufs: core: remove link_startup_again logic MAINTAINERS: Add myself to the list of UFS maintainers MAINTAINERS | 1 + drivers/ufs/ufs.c | 98 +++++++++++++++----------- drivers/ufs/ufs.h | 203 ++++++++++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 241 insertions(+), 61 deletions(-) --- base-commit: ddbcafeb53e7093c58488596bfce6d8823777c3a change-id: 20240910-topic-ufs-enhancements-fe8ef9ce39d8 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

4 18

[PATCH 00/13] ufs: enhancements to support Qualcomm UFS controllers
by Neil Armstrong 14 Oct '24

14 Oct '24

This serie regroups all the fixes and base enhancements required to support the Qualcomm UFS controllers in U-Boot. This syncs headers & defines from Linux, and includes 2 set of fixes that were sent separately: - ufs: core: remove link_startup_again logic - ufs: properly fix cache operations Without those 2 sets, UFS cannot initialize on Qualcomm controlers since v5, and a numerous of Cache issues makes any UFS controller fail to initialize. Since UFS core hasn't changed for a while, and since UFS is core technology for the Qualcomm SoCs, I volunteer maintaininig the UFS subsystem if Bhupesh & Neha Malcom Francis are ok with that. Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- Bhupesh Sharma (5): ufs/ufs.h: Add definition of 'ufshcd_rmwl()' ufs: Clear UECPA once due to LINERESET has happened during LINK_STARTUP ufs: Sync possible UFS Quirks with Linux UFS driver ufs: Add missing memory barriers ufs: Fix debug message in 'ufs_start' Marek Vasut (2): ufs: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS ufs: Add UFSHCD_QUIRK_HIBERN_FASTAUTO Neil Armstrong (6): ufs: allocate descriptors with size aligned with DMA_MINALIGN ufs: fix dcache flush and invalidate range calculation ufs: split flush and invalidate to only invalidate when required ufs: use dcache helpers for scsi_cmd data and only invalidate if necessary ufs: core: remove link_startup_again logic MAINTAINERS: Add myself to the list of UFS maintainers MAINTAINERS | 1 + drivers/ufs/ufs.c | 98 ++++++++++++++++++++-------------- drivers/ufs/ufs.h | 157 +++++++++++++++++++++++++++++++++++++++++++++++------- 3 files changed, 197 insertions(+), 59 deletions(-) --- base-commit: ca55cf8104c0dd78aae45fa66dd8400ef1b3d0ac change-id: 20240910-topic-ufs-enhancements-fe8ef9ce39d8 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

5 31