September 2024 - U-Boot

[PATCH v1] gpio: mcp230xx: add missing header for udelay()
by bigunclemax＠gmail.com 19 Sep '24

19 Sep '24

From: Maksim Kiselev <bigunclemax(a)gmail.com> Since GCC 14 -Werror=implicit-function-declaration is enabled by default. This leads to following compilation error: drivers/gpio/mcp230xx_gpio.c:57:9: error: implicit declaration of function ‘udelay’ [-Wimplicit-function-declaration] 57 | udelay(1); Add missing header to fix this error. Signed-off-by: Maksim Kiselev <bigunclemax(a)gmail.com> --- drivers/gpio/mcp230xx_gpio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/mcp230xx_gpio.c b/drivers/gpio/mcp230xx_gpio.c index 42e7fe9d47..b6f533b130 100644 --- a/drivers/gpio/mcp230xx_gpio.c +++ b/drivers/gpio/mcp230xx_gpio.c @@ -14,6 +14,7 @@ #include <asm/gpio.h> #include <dm/device_compat.h> #include <dt-bindings/gpio/gpio.h> +#include <linux/delay.h> enum mcp230xx_type { UNKNOWN = 0, -- 2.45.2

1 0

[PATCH v4 0/6] rpi5: initial support
by Ivan T. Ivanov 19 Sep '24

19 Sep '24

Hi, These patches are slight update for patches posted earlier here[1]. They are adding basic support for RPi5 and are based on v2 series from Dmitry Malkin[2]. What changed: * Initial memory map now includes whole first 1GB of DRAM. At runtime, the firmware will adjust this size depending on whether an HDMI cable is plugged in or not. If there is HDMI monitor connected it will reserve framebufer memory region and will add simple-framebuffer device into devicetree. * Dynamically calculate bits per pixel in video driver. This works on all prevous RPi's models that I have. * I am dropping PCIe patch for now. I made some progress on porting changes from vendor Linux tree to U-Boot. Unfortunatly testing it is little bit tricky. They are many devices behind PCIe, but more or less all of them requires missing either "reset-controller" or "clock-controller" or "pin-controller" drivers. I was able to probe "cdns,macb" device, but access to ethernet PHY over MDIO bus is stucking. Then I ported "raspberrypi,rp1-adc" driver from vendor Linux tree, but it requires missing clock. And on top of that machine that I used for developing this crashed and I lost my PCIe changes :-|. Anyway. These patches allows me to boot current openSUSE Tumbleweed without modification. I can see serial console log and boot process on HDMI connected monitor. I think these patches should be enough for start. Please consider for inclusion. Thanks, Ivan [1] https://lore.kernel.org/all/20231218210341.30073-1-iivanov@suse.de/ [2] https://lore.kernel.org/all/CAKRNjQ0dsWozGo4n8g58m4cCEk3n=qx1R+L24WBgpo-iP1… Dmitry Malkin (2): rpi5: add initial memory map for bcm2712 rpi5: Use devicetree as alternative way to read IO base addresses Ivan T. Ivanov (4): rpi5: Use devicetree to retrieve board revision bcm2835: Dynamically calculate bytes per pixel parameter mmc: bcmstb: Add support for bcm2712 SD controller configs: rpi_arm64: enable SDHCI BCMSTB driver arch/arm/mach-bcm283x/include/mach/base.h | 5 +- arch/arm/mach-bcm283x/include/mach/mbox.h | 3 +- arch/arm/mach-bcm283x/include/mach/sdhci.h | 3 +- arch/arm/mach-bcm283x/include/mach/timer.h | 3 +- arch/arm/mach-bcm283x/include/mach/wdog.h | 3 +- arch/arm/mach-bcm283x/init.c | 74 ++++++++- board/raspberrypi/rpi/rpi.c | 22 ++- configs/rpi_arm64_defconfig | 1 + drivers/mmc/bcmstb_sdhci.c | 173 ++++++++++++++++++++- drivers/video/bcm2835.c | 18 ++- 10 files changed, 282 insertions(+), 23 deletions(-) -- 2.35.3

5 18

xPL terminology
by Simon Glass 19 Sep '24

19 Sep '24

Hi, We have the term 'SPL', which has a dual meaning. It is both a particular phase of U-Boot (the one that loads U-Boot proper) and a generic name for any pre-proper phase. You can see that in a few areas, but for example CONFIG_SPL_BUILD is enabled for TPL and VPL builds, not just SPL. I propose to rename the generic term from SPL to xPL (meaning any PL phase), leaving SPL to just refer to the phase before U-Boot proper. The symbol would be CONFIG_XPL but in documentation we would talk of xPL, with a lower-case X, so it is more obvious that it refers to any phase. What do you think? Regards, Simon

6 9

[u-boot-test-hooks PATCH v4 0/3] Add support for Labgrid
by Simon Glass 19 Sep '24

19 Sep '24

This adds hooks for use with Labgrid. The only existing hook that really does anything now is the 'console' one. There is also a new 'getrole' hook which looks up a role to find various things about it, such as the U-Boot board name. Changes in v4: - Use an environment variable to select the Labgrid hooks - Add new patch to add .none scripts for power off/on - Support pytest fully with dual-build boards like Beagleplay Changes in v3: - Fall back to conf.${board_type}_${board_ident} if conf.all missing - Update scripts for latest version of Labgrid integration - Add poweroff.none and poweron.none - Provide -n flag when querying board info - Target the grpc version of Labgrid which is now in -master - Update README to cover the changes Changes in v2: - Make use of the common script (only) to set bin_dir - Make use of the common script (only) to set bin_dir Simon Glass (3): Create a common file for test scripts Add .none scripts for power off/on Provide some basic scripts for Labgrid integration README.md | 50 ++++++++++++++++++++++++++++++++++++ bin/console.labgrid | 42 ++++++++++++++++++++++++++++++ bin/ellesmere/common-labgrid | 46 +++++++++++++++++++++++++++++++++ bin/ellesmere/conf.all | 24 +++++++++++++++++ bin/getrole.labgrid | 25 ++++++++++++++++++ bin/poweroff.none | 22 ++++++++++++++++ bin/poweron.none | 22 ++++++++++++++++ bin/release.labgrid | 22 ++++++++++++++++ bin/release.none | 22 ++++++++++++++++ bin/u-boot-test-common | 36 ++++++++++++++++++++++++++ bin/u-boot-test-console | 8 +----- bin/u-boot-test-flash | 8 +----- bin/u-boot-test-getrole | 38 +++++++++++++++++++++++++++ bin/u-boot-test-power-off | 8 +----- bin/u-boot-test-power-on | 8 +----- bin/u-boot-test-release | 26 +++++++++++++++++++ bin/u-boot-test-reset | 8 +----- 17 files changed, 380 insertions(+), 35 deletions(-) create mode 100644 bin/console.labgrid create mode 100755 bin/ellesmere/common-labgrid create mode 100644 bin/ellesmere/conf.all create mode 100644 bin/getrole.labgrid create mode 100755 bin/poweroff.none create mode 100755 bin/poweron.none create mode 100644 bin/release.labgrid create mode 100644 bin/release.none create mode 100755 bin/u-boot-test-common create mode 100755 bin/u-boot-test-getrole create mode 100755 bin/u-boot-test-release -- 2.34.1

5 24

u-boot: rpi: Enlarge space available for kernel.
by Vagrant Cascadian 19 Sep '24

19 Sep '24

On 2024-09-16, Herman Rimm wrote: > --- /dev/null > +++ b/gnu/packages/patches/u-boot-50M-kernel.patch > @@ -0,0 +1,51 @@ > +This patch configures the U-Boot for Raspberry Pis to reserve 50 MB for > +linux kernels, because the 6.9 and newer linux-libre-arm64-generic > +kernels can be larger than 36 MB. It was created by Herman Rimm > +<herman(a)rimm.ee> in August 2024 and is not submitted upstream yet. > +diff --git a/board/raspberrypi/rpi/rpi.env b/board/raspberrypi/rpi/rpi.env > +index 30228285ed..54a8e9e5ae 100644 > +--- a/board/raspberrypi/rpi/rpi.env > ++++ b/board/raspberrypi/rpi/rpi.env > +@@ -43,22 +43,22 @@ dfu_alt_info+=zImage fat 0 1 > + * text_offset bytes (specified in the header of the Image) into a 2MB > + * boundary. The 'booti' command relocates the image if necessary. Linux uses > + * a default text_offset of 0x80000. In summary, loading at 0x80000 > +- * satisfies all these constraints and reserving memory up to 0x02400000 > +- * permits fairly large (roughly 36M) kernels. > ++ * satisfies all these constraints and reserving memory up to 0x03400000 > ++ * permits fairly large (roughly 50M) kernels. > + * > + * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't > + * conflict with something else. Reserving 1M for each of them at > +- * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty. > ++ * 0x03200000-0x03300000 and 0x03300000-0x03400000 should be plenty. > + * > + * On ARM, both the DTB and any possible initrd must be loaded such that they > + * fit inside the lowmem mapping in Linux. In practice, this usually means not > + * more than ~700M away from the start of the kernel image but this number can > + * be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line > + * parameter given to the kernel. So reserving memory from low to high > +- * satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for > +- * the DTB leaves rest of the free RAM to the initrd starting at 0x02700000. > ++ * satisfies this constraint again. Reserving 1M at 0x03400000-0x03500000 for > ++ * the DTB leaves rest of the free RAM to the initrd starting at 0x03500000. > + * Even with the smallest possible CPU-GPU memory split of the CPU getting > +- * only 64M, the remaining 25M starting at 0x02700000 should allow quite > ++ * only 64M, the remaining 11M starting at 0x03500000 should allow quite > + * large initrds before they start colliding with U-Boot. > + */ > + #ifdef CONFIG_ARM64 > +@@ -69,9 +69,9 @@ fdt_high=ffffffff > + initrd_high=ffffffff > + #endif > + kernel_addr_r=0x00080000 > +-scriptaddr=0x02400000 > +-pxefile_addr_r=0x02500000 > +-fdt_addr_r=0x02600000 > +-ramdisk_addr_r=0x02700000 > ++scriptaddr=0x03200000 > ++pxefile_addr_r=0x03300000 > ++fdt_addr_r=0x03400000 > ++ramdisk_addr_r=0x03500000 > + > + boot_targets=mmc usb pxe dhcp I would really like to hear comments from the upstream u-boot maintainers on adjusting these values... live well, vagrant

2 1

[PATCH 1/1] events: correct event_uninit() description
by Heinrich Schuchardt 19 Sep '24

19 Sep '24

The function name in the description must match the function. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- include/event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/event.h b/include/event.h index fb353ad623e..75141a192a4 100644 --- a/include/event.h +++ b/include/event.h @@ -385,7 +385,7 @@ static inline int event_notify_null(enum event_t type) int event_uninit(void); /** - * event_uninit() - Set up dynamic events + * event_init() - Set up dynamic events * * Init a list of dynamic event handlers, so that these can be added as * needed -- 2.45.2

2 1

[PATCH 1/1] boot: correct struct expo_action description
by Heinrich Schuchardt 19 Sep '24

19 Sep '24

Correct the description of the select.id member to fix a kernel-doc warning. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- include/expo.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/expo.h b/include/expo.h index 264745f7f01..c235fa2709d 100644 --- a/include/expo.h +++ b/include/expo.h @@ -42,7 +42,7 @@ enum expoact_type { * * @type: Action type (EXPOACT_NONE if there is no action) * @select: Used for EXPOACT_POINT_ITEM and EXPOACT_SELECT - * @id: ID number of the object affected. + * @select.id: ID number of the object affected. */ struct expo_action { enum expoact_type type; -- 2.45.2

2 1

[PATCH 1/1] sandbox: fix OS function descriptions
by Heinrich Schuchardt 19 Sep '24

19 Sep '24

* Add missing function names. * Align names used in descriptions with function names. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- include/os.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/os.h b/include/os.h index 4371270a1ee..ae3ca6d42a2 100644 --- a/include/os.h +++ b/include/os.h @@ -24,7 +24,7 @@ struct sandbox_state; int os_printf(const char *format, ...); /** - * Access to the OS read() system call + * os_read() - access the OS read() system call * * @fd: File descriptor as returned by os_open() * @buf: Buffer to place data @@ -34,7 +34,7 @@ int os_printf(const char *format, ...); ssize_t os_read(int fd, void *buf, size_t count); /** - * Access to the OS write() system call + * os_write() - access the OS write() system call * * @fd: File descriptor as returned by os_open() * @buf: Buffer containing data to write @@ -44,7 +44,7 @@ ssize_t os_read(int fd, void *buf, size_t count); ssize_t os_write(int fd, const void *buf, size_t count); /** - * Access to the OS lseek() system call + * os_lseek() - access the OS lseek() system call * * @fd: File descriptor as returned by os_open() * @offset: File offset (based on whence) @@ -67,7 +67,7 @@ off_t os_lseek(int fd, off_t offset, int whence); off_t os_filesize(int fd); /** - * Access to the OS open() system call + * os_open() - access the OS open() system call * * @pathname: Pathname of file to open * @flags: Flags, like OS_O_RDONLY, OS_O_RDWR @@ -162,7 +162,7 @@ void os_raise_sigalrm(void); void os_tty_raw(int fd, bool allow_sigs); /** - * os_fs_restore() - restore the tty to its original mode + * os_fd_restore() - restore the tty to its original mode * * Call this to restore the original terminal mode, after it has been changed * by os_tty_raw(). This is an internal function. @@ -207,14 +207,14 @@ void *os_realloc(void *ptr, size_t length); void os_usleep(unsigned long usec); /** - * Gets a monotonic increasing number of nano seconds from the OS + * os_get_nsec() - get monotonically increasing number of nano seconds from OS * - * Return: a monotonic increasing time scaled in nano seconds + * Return: a monotoniccally increasing time scaled in nano seconds */ uint64_t os_get_nsec(void); /** - * Parse arguments and update sandbox state. + * os_parse_args() - parse arguments and update sandbox state. * * @state: sandbox state to update * @argc: argument count -- 2.45.2

2 1

[PATCH v6 00/12] net: tcp: improve tcp support
by Mikhail Kshevetskiy 19 Sep '24

19 Sep '24

U-Boot support of LWIP is not ready for a moment, but we already have some kind of tcp support. Unfrotunately this support is really bad. Some of the known issues: * tcp packet from other connection can break a current one * tcp send sequence always starts from zero * bad tcp options processing * strange assumptions on packet size for selectiv acknowledge * tcp interface assumes one of the two scenarios: - data downloading from remote host to a board - request-response exchange with a small packets so it's not possible to upload large amount of data from the board to remote host. * wget generate bad tcp stream, test should fail but it passes instead This series of patches fixes all of the above issuess. The benefits: * A lot of bug was fixed * Better and more reliable TCP state machine * Tcp cliens becomes smaller/simpler * Data uploading was fixed (now it's possible to transmit a huge amount of data from the board to remote host) * Netcat over tcp was implemented. Netcat supports data downloading/uploading from/to remote host in client/server mode. * An example web-server implementation. This code can be used as a base for web-based firmware uploading used by some vendors. Modification was verified with * firmware downloading via u-boot wget command * fastboot over tcp * netcat linux client * Firefox/Chrome/Edge using example web-server implementation Changes v2: * cover letter was added * some patches were removed Changes v3: * better cover letter Changes v4: * fix bug in debug output * add more comments * codestyle fixes Changes v5: * old patches were ocasionally sent with v4 * add back web-server patches * fix bug in debug output * add more comments * codestyle fixes Changes v6: * fix the wget test * improve description of "simplify tcp header filling code" patch Mikhail Kshevetskiy (12): net/tcp: fix TCP options processing net/tcp: fix selective acknowledge net/tcp: put connection specific data into a tcp_stream structure net/tcp: add connection info to tcp_stream structure net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs net/tcp: improve tcp framework, use better state machine test/cmd/wget: fix the test net/tcp: simplify tcp header filling code net/tcp: define a fallback value for rcv_wnd size net/netcat: add netcat over tcp support net/httpd: add httpd common code net/httpd-upload: an example web-server implementation for file uploading arch/sandbox/include/asm/eth.h | 4 + cmd/Kconfig | 21 + cmd/net.c | 54 +- include/net.h | 7 +- include/net/httpd-upload.h | 12 + include/net/httpd.h | 64 ++ include/net/netcat.h | 20 + include/net/tcp.h | 235 +++++- include/net/wget.h | 8 - net/Kconfig | 14 + net/Makefile | 21 + net/fastboot_tcp.c | 190 ++--- net/httpd-upload.c | 123 +++ net/httpd.c | 692 +++++++++++++++++ net/httpd_upload/error_400.html | 9 + net/httpd_upload/error_404.html | 10 + net/httpd_upload/index.html | 14 + net/httpd_upload/upload_ok.html | 7 + net/net.c | 36 +- net/netcat.c | 181 +++++ net/tcp.c | 1259 ++++++++++++++++++++++--------- net/wget.c | 479 ++++-------- test/cmd/wget.c | 45 +- 23 files changed, 2618 insertions(+), 887 deletions(-) create mode 100644 include/net/httpd-upload.h create mode 100644 include/net/httpd.h create mode 100644 include/net/netcat.h create mode 100644 net/httpd-upload.c create mode 100644 net/httpd.c create mode 100644 net/httpd_upload/error_400.html create mode 100644 net/httpd_upload/error_404.html create mode 100644 net/httpd_upload/index.html create mode 100644 net/httpd_upload/upload_ok.html create mode 100644 net/netcat.c -- 2.45.2

3 20

[PATCH v6 00/28] Integrate MbedTLS v3.6 LTS with U-Boot
by Raymond Mao 19 Sep '24

19 Sep '24

Integrate MbedTLS v3.6 LTS (currently v3.6.0) with U-Boot. Motivations: ------------ 1. MbedTLS is well maintained with LTS versions. 2. LWIP is integrated with MbedTLS and easily to enable HTTPS. 3. MbedTLS recently switched license back to GPLv2. Prerequisite: ------------- This patch series requires mbedtls git repo to be added as a subtree to the main U-Boot repo via: $ git subtree add --prefix lib/mbedtls/external/mbedtls \ https://github.com/Mbed-TLS/mbedtls.git \ v3.6.0 --squash Moreover, due to the Windows-style files from mbedtls git repo, we need to convert the CRLF endings to LF and do a commit manually: $ git add --renormalize . $ git commit New Kconfig options: -------------------- `MBEDTLS_LIB` is for MbedTLS general switch. `MBEDTLS_LIB_CRYPTO` is for replacing original digest and crypto libs with MbedTLS. `MBEDTLS_LIB_X509` is for replacing original X509, PKCS7, MSCode, ASN1, and Pubkey parser with MbedTLS. `LEGACY_CRYPTO` is introduced as a main switch for legacy crypto library. `LEGACY_CRYPTO_BASIC` is for the basic crypto functionalities and `LEGACY_CRYPTO_CERT` is for the certificate related functionalities. For each of the algorithm, a pair of `<alg>_LEGACY` and `<alg>_MBEDTLS` Kconfig options are introduced. Meanwhile, `SPL_` Kconfig options are introduced. In this patch set, MBEDTLS_LIB, MBEDTLS_LIB_CRYPTO and MBEDTLS_LIB_X509 are by default enabled in qemu_arm64_defconfig and sandbox_defconfig for testing purpose. Patches for external MbedTLS project: ------------------------------------- Since U-Boot uses Microsoft Authentication Code to verify PE/COFFs executables which is not supported by MbedTLS at the moment, addtional patches for MbedTLS are created to adapt with the EFI loader: 1. Decoding of Microsoft Authentication Code. 2. Decoding of PKCS#9 Authenticate Attributes. 3. Extending MbedTLS PKCS#7 lib to support multiple signer's certificates. 4. MbedTLS native test suites for PKCS#7 signer's info. All above 4 patches (tagged with `mbedtls/external`) are submitted to MbedTLS project and being reviewed, eventually they should be part of MbedTLS LTS release. But before that, please merge them into U-Boot, otherwise the building will be broken when MBEDTLS_LIB_X509 is enabled. See below PR link for the reference: https://github.com/Mbed-TLS/mbedtls/pull/9001 Miscellaneous: -------------- Optimized MbedTLS library size by tailoring the config file and disabling all unnecessary features for EFI loader. >From v2, original libs (rsa, asn1_decoder, rsa_helper, md5, sha1, sha256, sha512) are completely replaced when MbedTLS is enabled. >From v3, the size-growth is slightly reduced by refactoring Hash functions. >From v6, smaller implementations for SHA256 and SHA512 are enabled and target size reduce significantly. Target(QEMU arm64) size-growth when enabling MbedTLS: v1: 6.03% v2: 4.66% v3 - v5: 4.55% v6: 2.90% Please see the latest output from buildman for size-growth on QEMU arm64, Sandbox and Nanopi A64. [1] Tests done: ----------- EFI Secure Boot test (EFI variables loading and verifying, EFI signed image verifying and booting) via U-Boot console. EFI Secure Boot and Capsule sandbox test passed. Known issues: ------------- None. [1]: buildman output for size comparison (qemu_arm64, sandbox and nanopi_a64) ``` aarch64: (for 2/2 boards) all -1468.0 bss +16.0 data -64.0 rodata +200.0 text -1620.0 qemu_arm64 : all +4608 bss +80 data -64 rodata +200 text +4392 u-boot: add: 29/-17, grow: 12/-16 bytes: 13072/-8304 (4768) function old new delta mbedtls_internal_sha1_process - 4540 +4540 mbedtls_internal_md5_process - 2928 +2928 K - 896 +896 mbedtls_sha256_finish - 484 +484 mbedtls_internal_sha256_process - 432 +432 mbedtls_sha1_finish - 420 +420 mbedtls_internal_sha512_process - 412 +412 mbedtls_sha512_finish - 360 +360 mbedtls_sha512_starts - 340 +340 mbedtls_md5_finish - 336 +336 mbedtls_sha512_update - 264 +264 mbedtls_sha256_update - 252 +252 mbedtls_sha1_update - 236 +236 mbedtls_md5_update - 236 +236 mbedtls_sha512 - 148 +148 mbedtls_sha256_starts - 124 +124 hash_init_sha512 52 128 +76 hash_init_sha256 52 128 +76 mbedtls_sha1_starts - 72 +72 mbedtls_md5_starts - 60 +60 hash_init_sha1 52 112 +60 mbedtls_platform_zeroize - 56 +56 sha512_put_uint64_be - 40 +40 mbedtls_sha512_free - 16 +16 mbedtls_sha256_free - 16 +16 mbedtls_sha1_free - 16 +16 mbedtls_md5_free - 16 +16 hash_finish_sha512 72 88 +16 hash_finish_sha256 72 88 +16 hash_finish_sha1 72 88 +16 sha512_csum_wd 68 80 +12 sha256_csum_wd 68 80 +12 sha1_csum_wd 68 80 +12 md5_wd 68 80 +12 mbedtls_sha512_init - 12 +12 mbedtls_sha256_init - 12 +12 mbedtls_sha1_init - 12 +12 mbedtls_md5_init - 12 +12 memset_func - 8 +8 sha512_update 4 8 +4 sha384_update 4 8 +4 sha256_update 12 8 -4 sha1_update 12 8 -4 sha256_process 16 - -16 sha1_process 16 - -16 hash_update_sha512 36 16 -20 hash_update_sha256 36 16 -20 hash_update_sha1 36 16 -20 MD5Init 56 36 -20 sha1_starts 60 36 -24 hash_update_sha384 36 - -36 hash_init_sha384 52 - -52 sha384_csum_wd 68 12 -56 sha256_starts 104 40 -64 sha256_padding 64 - -64 sha1_padding 64 - -64 hash_finish_sha384 72 - -72 sha512_finish 152 36 -116 sha512_starts 168 40 -128 sha384_starts 168 40 -128 sha384_finish 152 4 -148 MD5Final 196 44 -152 sha512_base_do_finalize 160 - -160 static.sha256_update 228 - -228 static.sha1_update 240 - -240 sha512_base_do_update 244 - -244 MD5Update 260 - -260 sha1_finish 300 36 -264 sha256_finish 404 36 -368 sha256_armv8_ce_process 428 - -428 sha1_armv8_ce_process 484 - -484 sha512_K 640 - -640 sha512_block_fn 1212 - -1212 MD5Transform 2552 - -2552 nanopi_a64 : all -7544 bss -48 data -64 rodata +200 text -7632 u-boot: add: 21/-8, grow: 4/-8 bytes: 10692/-4364 (6328) function old new delta mbedtls_internal_sha1_process - 4540 +4540 mbedtls_internal_md5_process - 2928 +2928 mbedtls_sha256_finish - 484 +484 mbedtls_internal_sha256_process - 432 +432 mbedtls_sha1_finish - 420 +420 mbedtls_md5_finish - 336 +336 K - 256 +256 mbedtls_sha256_update - 252 +252 mbedtls_sha1_update - 236 +236 mbedtls_md5_update - 236 +236 mbedtls_sha256_starts - 124 +124 hash_init_sha256 52 128 +76 mbedtls_sha1_starts - 72 +72 mbedtls_md5_starts - 60 +60 hash_init_sha1 52 112 +60 mbedtls_platform_zeroize - 56 +56 mbedtls_sha256_free - 16 +16 mbedtls_sha1_free - 16 +16 mbedtls_md5_free - 16 +16 hash_finish_sha256 72 88 +16 hash_finish_sha1 72 88 +16 mbedtls_sha256_init - 12 +12 mbedtls_sha1_init - 12 +12 mbedtls_md5_init - 12 +12 memset_func - 8 +8 sha256_update 12 - -12 sha1_update 12 - -12 hash_update_sha256 36 16 -20 hash_update_sha1 36 16 -20 MD5Init 56 36 -20 sha1_starts 60 36 -24 sha256_starts 104 40 -64 sha256_padding 64 - -64 sha1_padding 64 - -64 MD5Final 196 44 -152 static.sha256_update 228 - -228 static.sha1_update 240 - -240 MD5Update 260 - -260 sha1_finish 300 36 -264 sha256_finish 404 36 -368 MD5Transform 2552 - -2552 sandbox: (for 1/1 boards) all +19312.0 data +1440.0 rodata -4128.0 text +22000.0 sandbox : all +19312 data +1440 rodata -4128 text +22000 u-boot: add: 258/-206, grow: 122/-59 bytes: 90286/-76286 (14000) function old new delta mbedtls_internal_sha1_process - 4982 +4982 static.mbedtls_x509_crt_parse_der_internal - 4184 +4184 static.pci_uclass_post_probe - 3570 +3570 pkcs7_parse_message 361 3638 +3277 static.sandbox_tpm2_xfer - 2605 +2605 rsa_verify 541 2794 +2253 mbedtls_internal_md5_process - 2189 +2189 mbedtls_rsa_parse_pubkey - 2053 +2053 mbedtls_rsa_private - 1813 +1813 run_test 2220 3932 +1712 mbedtls_mpi_exp_mod - 1649 +1649 read_one_chunk - 1606 +1606 x509_populate_cert - 1462 +1462 mbedtls_mpi_div_mpi - 1459 +1459 static.simple_panel_get_edid_timing - 1385 +1385 static.sqfs_search_dir - 1336 +1336 static.mbedtls_x509_dn_gets - 1305 +1305 mbedtls_mpi_inv_mod - 1214 +1214 mbedtls_rsa_rsaes_pkcs1_v15_decrypt - 1156 +1156 mbedtls_x509_get_subject_alt_name_ext - 1155 +1155 rsa_check_pair_wrap - 1018 +1018 static.K - 896 +896 oid_x520_attr_type - 840 +840 static.pci_uclass_pre_probe - 832 +832 read_persistent_digest - 825 +825 ta_rpc_test_invoke_func - 812 +812 ta_avb_invoke_func - 783 +783 static.dm_pciauto_setup_device - 747 +747 efi_load_image 4418 5157 +739 static.pkcs7_get_signer_info - 671 +671 static.dfu_bind - 637 +637 efi_tcg2_hash_log_extend_event - 622 +622 static.sqfs_frag_lookup - 605 +605 mbedtls_mpi_core_montmul - 537 +537 mbedtls_internal_sha512_process - 536 +536 mbedtls_mpi_core_mla - 520 +520 mbedtls_sha256_finish - 519 +519 static.sqfs_resolve_symlink - 509 +509 mbedtls_internal_sha256_process - 487 +487 static.overlay_update_local_node_references - 483 +483 mbedtls_x509_get_time - 483 +483 mbedtls_mpi_mul_mpi - 479 +479 mbedtls_x509_get_name - 470 +470 mbedtls_pk_parse_subpubkey - 463 +463 efi_tcg2_get_capability - 462 +462 find_and_setup_root - 456 +456 static.new_string - 450 +450 static.set_string - 448 +448 mbedtls_sha1_finish - 445 +445 longest_match - 424 +424 rsa_rsassa_pkcs1_v15_encode - 414 +414 mbedtls_mpi_gcd - 413 +413 load_full_partition - 413 +413 static.get_languages - 402 +402 static.efi_uninstall_protocol - 400 +400 static.list_package_lists - 398 +398 static.update_package_list - 374 +374 static.efi_disconnect_all_drivers - 363 +363 efi_tcg2_get_eventlog - 361 +361 static.get_string - 360 +360 oid_x509_ext - 360 +360 static.new_package_list - 359 +359 static.efi_convert_device_path_to_text - 359 +359 static.get_keyboard_layout - 355 +355 rsa_sign_wrap - 355 +355 add_sub_mpi - 355 +355 mbedtls_sha512_finish - 352 +352 efi_tcg2_submit_command - 351 +351 static.find_keyboard_layouts - 339 +339 rsa_verify_wrap - 324 +324 oid_sig_alg - 320 +320 efi_tcg2_notify_exit_boot_services - 316 +316 mbedtls_mpi_sub_abs - 315 +315 static.append_device_path_instance - 311 +311 static.get_secondary_languages - 301 +301 rsa_encrypt_wrap - 294 +294 static.hash_init_sha512 41 334 +293 static.efi_convert_device_node_to_text - 293 +293 static.get_next_device_path_instance - 290 +290 spi_set_speed_mode - 287 +287 static.buck_get_suspend_enable - 276 +276 mbedtls_mpi_core_get_mont_r2_unsafe - 276 +276 efi_tcg2_get_active_pcr_banks - 273 +273 public_key - 270 +270 static.buck_set_suspend_enable - 264 +264 static.rsa_check_context - 260 +260 public_key_verify_signature 419 678 +259 __udivti3 - 248 +248 mbedtls_rsa_public - 242 +242 static.oid_md_alg - 240 +240 mbedtls_asn1_get_alg - 238 +238 static.get_package_list_handle - 231 +231 static.dm_pciauto_exp_link_stable - 231 +231 static.overlay_get_target - 224 +224 mbedtls_mpi_shift_l - 224 +224 mbedtls_pkcs7_free - 223 +223 static.register_package_notify - 222 +222 static.create_device_node - 222 +222 mbedtls_mpi_fill_random - 221 +221 static.dfu_handle - 213 +213 static.usb_emul_find_devnum - 210 +210 mbedtls_sha512_update - 209 +209 static.remove_package_list - 208 +208 static.export_package_lists - 206 +206 static.montMul - 202 +202 static.sqfs_tokenize - 201 +201 static.is_device_path_multi_instance - 201 +201 mbedtls_mpi_copy - 200 +200 mbedtls_sha256_update - 197 +197 static.set_keyboard_layout - 196 +196 static.ldo_set_suspend_enable - 195 +195 static.asn1_get_tagged_int - 194 +194 static.get_device_path_size - 191 +191 static.efi_open_volume - 191 +191 static.append_device_path - 190 +190 static.append_device_node - 188 +188 static.ldo_get_suspend_enable - 182 +182 mbedtls_pk_parse_public_key - 182 +182 static.duplicate_device_path - 180 +180 mbedtls_x509_crt_free - 177 +177 static.mbedtls_sha1_update - 176 +176 mbedtls_mpi_shift_r - 174 +174 static.unregister_package_notify - 169 +169 rsa_free_wrap - 161 +161 mbedtls_mpi_cmp_mpi - 161 +161 static.pkcs7_get_one_cert - 160 +160 oid_pk_alg - 160 +160 mbedtls_mpi_read_binary - 159 +159 md5_wd 571 729 +158 mbedtls_mpi_core_write_be - 154 +154 static.switch_set_enable - 150 +150 mbedtls_mpi_mod_mpi - 146 +146 mbedtls_asn1_get_alg_null - 142 +142 __alloc_extent_buffer - 142 +142 static.pldo_set_enable - 141 +141 mbedtls_mpi_cmp_abs - 141 +141 mbedtls_mpi_mul_int - 138 +138 mbedtls_asn1_get_len - 133 +133 static.switch_get_enable - 130 +130 static.nldo_set_enable - 130 +130 static.overlay_adjust_node_phandles - 121 +121 static.hash_init_sha256 41 161 +120 mbedtls_mpi_grow - 120 +120 reg_set_enable - 118 +118 static.load_and_verify_vbmeta 10699 10814 +115 mbedtls_rsa_check_pubkey - 109 +109 static.pldo_get_enable - 108 +108 static.mbedtls_asn1_get_bitstring - 108 +108 x509_get_timestamp - 106 +106 static.buck_get_suspend_value - 101 +101 mbedtls_asn1_get_bool - 99 +99 static.asn1_get_sequence_of_cb - 98 +98 efi_reserve_memory - 97 +97 mbedtls_rsa_info - 96 +96 static.buck_set_suspend_value - 93 +93 ldo_get_enable - 92 +92 buck_get_enable - 92 +92 data_gz 21219 21309 +90 mbedtls_x509_get_serial - 88 +88 mbedtls_mpi_resize_clear - 87 +87 static.sqfs_read_entry - 86 +86 static.nldo_get_enable - 83 +83 mbedtls_mpi_bitlen - 82 +82 static.x509_get_uid - 81 +81 static.mbedtls_mpi_sub_int - 81 +81 static.pldo_set_suspend_enable - 78 +78 mbedtls_oid_get_md_alg - 78 +78 ldo_set_enable - 77 +77 buck_set_enable - 77 +77 static.sqfs_count_tokens - 76 +76 static.pldo_set_value - 75 +75 static.pldo_set_suspend_value - 75 +75 static.pldo_get_suspend_enable - 75 +75 static.nldo_set_value - 75 +75 static.nldo_set_suspend_value - 75 +75 mbedtls_mpi_cmp_int - 75 +75 find_device - 75 +75 rsa_decrypt_wrap - 73 +73 pta_scp03_invoke_func - 73 +73 mbedtls_mpi_lset - 73 +73 sha512_put_uint64_be - 72 +72 mbedtls_md_info_from_type - 72 +72 static.sqfs_disk_read - 69 +69 static.sqfs_calc_n_blks - 69 +69 static.simple_panel_set_backlight - 68 +68 ldo_get_value - 67 +67 buck_get_value - 67 +67 static.nldo_set_suspend_enable - 65 +65 free_extent_state_func - 65 +65 static.nldo_get_suspend_enable - 64 +64 sha1_starts - 64 +64 mbedtls_mpi_lsb - 64 +64 rsa_alloc_wrap - 62 +62 mbedtls_pk_setup - 62 +62 pkcs7_free_message 115 176 +61 static.unicode_test_u16_strcmp - 60 +60 rsa_debug - 60 +60 lib_test_strlcat 1195 1255 +60 public_key_signature_free - 58 +58 static.x509_free_mbedtls_ctx - 57 +57 static.nldo_get_value - 57 +57 static.nldo_get_suspend_value - 57 +57 x509_populate_dn_name_string - 56 +56 efi_tcg2_protocol - 56 +56 mbedtls_mpi_core_montmul_init - 55 +55 static.pldo_get_value - 54 +54 static.pldo_get_suspend_value - 54 +54 mbedtls_asn1_get_bitstring_null - 53 +53 efi_launch_capsules 3090 3142 +52 static.pkcs7_free_signer_info - 51 +51 static.ldo_set_suspend_value - 51 +51 mbedtls_mpi_free - 51 +51 static.mbedtls_mpi_core_bigendian_to_host - 50 +50 mbedtls_asn1_get_tag - 50 +50 event_log - 48 +48 static.subM - 47 +47 mbedtls_pk_free - 45 +45 mbedtls_zeroize_and_free - 42 +42 static.ldo_get_suspend_value - 38 +38 static.sandbox_tpm2_get_desc - 35 +35 efi_capsule_update_firmware 1354 1389 +35 static.simple_panel_enable_backlight - 34 +34 static.efi_firmware_get_image_info 696 730 +34 x509_parse2_int - 33 +33 ldo_set_value - 32 +32 buck_set_value - 32 +32 static.hash_init_sha1 75 105 +30 mbedtls_asn1_sequence_free - 30 +30 mbedtls_asn1_free_named_data_list_shallow - 30 +30 efi_start_image 2492 2522 +30 static.hash_finish_sha512 40 66 +26 static.hash_finish_sha256 40 66 +26 static.hash_finish_sha1 40 66 +26 generic_phy_get_bulk 366 392 +26 static.set_descriptors - 25 +25 reboot_mode_probe 139 164 +25 static.efi_open_protocol 495 519 +24 static.mbedtls_mpi_get_bit - 23 +23 sqfs_opendir 1655 1677 +22 rsa_can_do - 22 +22 efi_install_fdt 572 594 +22 sha512_starts 132 152 +20 mbedtls_sha512_free - 20 +20 mbedtls_sha256_free - 20 +20 mbedtls_sha1_free - 20 +20 efi_query_capsule_caps 210 229 +19 static.mbedtls_platform_zeroize - 18 +18 sha256_starts 68 86 +18 pta_scp03_open_session - 18 +18 mbedtls_mpi_size - 18 +18 c2 - 18 +18 static.efi_cout_set_cursor_position 257 274 +17 rsa_get_bitlen - 17 +17 static.efi_register_notify_events - 16 +16 static.efi_cout_query_mode 241 257 +16 static.dfu_runtime_descs - 16 +16 static.__reset_get_bulk 166 182 +16 mbedtls_sha512_init - 16 +16 efi_guid_tcg2_protocol - 16 +16 efi_guid_final_events - 16 +16 efi_file_info_guid - 16 +16 clk_get_bulk 157 173 +16 efi_tcg2_set_active_pcr_banks - 15 +15 efi_tcg2_get_result_of_set_active_pcr_banks - 15 +15 efi_pxe_base_code_arp - 15 +15 unicode_test_utf8_utf16_strcpy 946 960 +14 mbedtls_mpi_add_mpi - 14 +14 c4 - 14 +14 c1 - 14 +14 efi_locate_device_path 541 554 +13 efi_file_read_int 610 623 +13 d4 - 13 +13 rtc_days_in_month - 12 +12 mbedtls_mpi_sub_mpi - 12 +12 i2 - 12 +12 static.efi_cin_unregister_key_notify 257 268 +11 efi_auth_var_get_type 102 113 +11 static.count_descriptors - 10 +10 i1 - 10 +10 fdt_overlay_apply 1887 1897 +10 x509_free_certificate 115 124 +9 static.efi_cout_output_string 534 543 +9 static.efi_cin_reset_ex 185 194 +9 static.efi_cin_reset 185 194 +9 static.dfu_intf_runtime - 9 +9 free_map_lookup - 9 +9 static.memset_func - 8 +8 static.efi_connect_controller 685 693 +8 mbedtls_sha512_info - 8 +8 mbedtls_sha384_info - 8 +8 mbedtls_sha256_info - 8 +8 mbedtls_sha1_info - 8 +8 mbedtls_md5_info - 8 +8 mbedtls_ct_zero - 8 +8 i3 - 8 +8 c3 - 8 +8 unicode_test_utf8_utf16_strlen 443 450 +7 unicode_test_utf16_utf8_strlen 443 450 +7 unicode_test_utf16_utf8_strcpy 1021 1028 +7 static.efi_firmware_raw_set_image 2312 2319 +7 static.efi_cin_register_key_notify 296 303 +7 static.efi_cin_read_key_stroke_ex 386 393 +7 static.efi_cin_read_key_stroke 247 254 +7 pci_bus_read_config 83 90 +7 mpi_bigendian_to_host - 7 +7 check_node_type 171 178 +7 ta_rpc_test_open_session - 6 +6 ta_avb_open_session - 6 +6 j3 - 6 +6 efi_signature_verify 1640 1646 +6 j1 - 5 +5 eficonfig_process_select_file 2179 2184 +5 efi_protocol_open 408 413 +5 efi_dp_from_file 274 279 +5 crypt_sha512crypt_rn_wrapped 2408 2413 +5 crypt_sha256crypt_rn_wrapped 1669 1674 +5 unicode_test_u16_strlen 269 273 +4 static.eficonfig_edit_boot_option 1567 1571 +4 static.efi_purge_handle 150 154 +4 static.avb_safe_memcmp 36 40 +4 sqfs_find_inode 347 351 +4 sqfs_dir_offset 101 105 +4 pci_conv_32_to_size 46 50 +4 pci_bus_find_devfn 121 125 +4 fdt_subnode_offset_namelen 240 244 +4 efi_unload_image 403 407 +4 efi_search_obj 43 47 +4 efi_delete_image 150 154 +4 efi_close_protocol 229 233 +4 efi_add_memory_map 34 38 +4 do_bootefi_exec 444 448 +4 dm_spi_release_bus 23 27 +4 dm_spi_claim_bus 153 157 +4 dm_pci_write_config8 10 14 +4 dm_pci_write_config16 13 17 +4 avb_validate_utf8 95 99 +4 avb_descriptor_validate_and_byteswap 96 100 +4 avb_descriptor_foreach 715 719 +4 avb_be64toh 7 11 +4 avb_be32toh 5 9 +4 asymmetric_key_generate_id 109 113 +4 unicode_test_u16_strncmp 377 380 +3 unicode_test_u16_strlcat 840 843 +3 unflatten_device_tree 274 277 +3 str_upper 648 651 +3 static.efi_reinstall_protocol_interface 277 280 +3 static.efi_exit 668 671 +3 sandbox_hub_bind 20 23 +3 find_handle 314 317 +3 eficonfig_file_selected 484 487 +3 efi_firmware_get_lsv_from_dtb 369 372 +3 efi_create_indexed_name 174 177 +3 efi_auth_var_get_guid 85 88 +3 SHA256_Update_recycled 76 79 +3 unicode_test_utf8_utf16_strncpy 929 931 +2 unicode_test_utf16_utf8_strncpy 921 923 +2 static.tcg2_measure_variable 236 238 +2 static.efi_cout_set_mode 222 224 +2 static.do_env_print 1278 1280 +2 prepare_file_selection_entry 400 402 +2 eficonfig_boot_edit_save 96 98 +2 eficonfig_add_change_boot_order_entry 346 348 +2 eficonfig_add_boot_selection_entry 461 463 +2 efi_str_to_u16 103 105 +2 efi_serialize_load_option 260 262 +2 efi_get_variable_mem 492 494 +2 efi_file_setinfo 523 525 +2 efi_file_getinfo 783 785 +2 efi_convert_string 109 111 +2 efi_binary_run 790 792 +2 do_bootmenu 2154 2156 +2 create_boot_option_entry 206 208 +2 bootdev_hunt 366 368 +2 add_packages 890 892 +2 unicode_test_efi_create_indexed_name 481 482 +1 u16_strsize 20 21 +1 u16_strlcat 106 107 +1 file_open 738 739 +1 efi_var_mem_ins 257 258 +1 cros_ec_spi_command 420 421 +1 efi_update_capsule 427 426 -1 byteReverse 1 - -1 static.efi_cout_set_attribute 249 247 -2 sha256_csum_wd 155 153 -2 vidconsole_sync_copy 13 9 -4 vidconsole_memmove 51 47 -4 tcg2_uninit 212 208 -4 static.hash_update_sha1 29 25 -4 spi_find_chip_select 440 436 -4 sha512_csum_wd 169 165 -4 read_tree_block 1566 1562 -4 read_allocated_block 2304 2300 -4 put_ext4 383 379 -4 free_extent_buffer 321 317 -4 ext4fs_update_journal 893 889 -4 ext4fs_read_inode 392 388 -4 ext4fs_devread 34 30 -4 efi_init_early 1055 1051 -4 cros_ec_register 291 287 -4 cros_ec_calc_checksum 27 23 -4 cache_tree_free_extents 57 53 -4 btrfs_setup_root 101 97 -4 btrfs_scan_one_device 675 671 -4 btrfs_release_all_roots 62 58 -4 btrfs_read_dev_super 1228 1224 -4 btrfs_free_path 38 34 -4 btrfs_free_fs_info 53 49 -4 btrfs_close_devices 136 132 -4 static.hash_update_sha512 22 17 -5 static.hash_update_sha256 22 17 -5 lib_test_efi_dp_check_length 593 588 -5 efi_stri_coll 252 247 -5 cros_ec_i2c_command 409 404 -5 static.ta_rpc_test_open_session 6 - -6 static.ta_avb_open_session 6 - -6 efi_str_to_fat 369 362 -7 static.free_map_lookup 9 - -9 efi_init_obj_list 5665 5656 -9 dfu_intf_runtime 9 - -9 count_descriptors 10 - -10 rsa_verify_key 383 372 -11 install_smbios_table 583 571 -12 d5 12 - -12 sha256_update 14 - -14 efi_runtime_relocate 240 226 -14 x509_akid_note_name 15 - -15 static.efi_tcg2_set_active_pcr_banks 15 - -15 static.efi_tcg2_get_result_of_set_active_pcr_banks 15 - -15 static.efi_pxe_base_code_arp 15 - -15 pkcs7_sig_note_skid 15 - -15 pkcs7_sig_note_serial 15 - -15 pkcs7_sig_note_issuer 15 - -15 static.rsapubkey_action_table 16 - -16 efi_register_notify_events 16 - -16 efi_guid_event_group_return_to_efibootmgr 16 - -16 efi_disk_probe 571 555 -16 dfu_runtime_descs 16 - -16 static.pta_scp03_open_session 18 - -18 sha384_csum_wd 296 276 -20 x509_note_serial 21 - -21 tcg2_create_digest 718 697 -21 static.hash_update_sha384 22 - -22 pkcs7_check_content_type 22 - -22 do_net_stats 371 349 -22 x509_decoder 24 - -24 x509_akid_decoder 24 - -24 rsapubkey_decoder 24 - -24 pkcs7_decoder 24 - -24 mscode_machine 24 - -24 mscode_decoder 24 - -24 mscode_action_table 24 - -24 set_descriptors 25 - -25 efi_set_variable_int 2130 2105 -25 x509_note_tbs_certificate 26 - -26 x509_note_not_before 28 - -28 x509_note_not_after 28 - -28 pkcs7_note_data 28 - -28 x509_note_issuer 30 - -30 rsa_get_n 30 - -30 static.ldo_set_value 113 81 -32 static.buck_set_value 203 171 -32 _u_boot_list_2_ut_lib_test_2_lib_asn1_x509 32 - -32 _u_boot_list_2_ut_lib_test_2_lib_asn1_pkey 32 - -32 _u_boot_list_2_ut_lib_test_2_lib_asn1_pkcs7 32 - -32 sandbox_tpm2_get_desc 35 - -35 x509_note_subject 36 - -36 pkcs7_note_content 36 - -36 simple_panel_enable_backlight 37 - -37 sha1_csum_wd 209 171 -38 ldo_get_suspend_value 38 - -38 x509_akid_action_table 40 - -40 static.hash_finish_sha384 40 - -40 x509_note_params 41 - -41 pkcs7_note_signeddata_version 41 - -41 asn1_op_lengths 41 - -41 subM 43 - -43 efi_esrt_populate 1209 1165 -44 ZSTD_decompressDCtx 7789 7745 -44 pkcs7_note_certificate_list 46 - -46 static.public_key_signature_free 48 - -48 static.event_log 48 - -48 mscode_note_digest 51 - -51 ldo_set_suspend_value 51 - -51 pldo_get_value 54 - -54 pldo_get_suspend_value 54 - -54 unicode_test_u16_strcmp 56 - -56 static.efi_tcg2_protocol 56 - -56 rsa_get_e 56 - -56 nldo_get_value 57 - -57 nldo_get_suspend_value 57 - -57 x509_extract_name_segment 62 - -62 sha256_padding 64 - -64 sha1_padding 64 - -64 nldo_get_suspend_enable 64 - -64 static.free_extent_state_func 65 - -65 sqfs_disk_read 65 - -65 sqfs_calc_n_blks 65 - -65 nldo_set_suspend_enable 65 - -65 static.ldo_get_value 133 66 -67 static.buck_get_value 196 129 -67 simple_panel_set_backlight 68 - -68 pkcs7_sig_note_signature 68 - -68 static.__func__ 32530 32459 -71 sqfs_count_tokens 72 - -72 pkcs7_sig_note_set_of_authattrs 72 - -72 static.pta_scp03_invoke_func 73 - -73 pldo_set_value 75 - -75 pldo_set_suspend_value 75 - -75 pldo_get_suspend_enable 75 - -75 pkcs7_sig_note_pkey_algo 75 - -75 nldo_set_value 75 - -75 nldo_set_suspend_value 75 - -75 static.ldo_set_enable 370 293 -77 static.buck_set_enable 482 405 -77 pldo_set_suspend_enable 78 - -78 static.find_device 79 - -79 pkcs7_note_signerinfo_version 79 - -79 x509_akid_note_kid 80 - -80 x509_akid_note_serial 81 - -81 pkcs7_extract_cert 81 - -81 sqfs_read_entry 82 - -82 nldo_get_enable 83 - -83 sha512_finish 123 32 -91 sha384_finish 123 32 -91 static.ldo_get_enable 386 294 -92 static.buck_get_enable 443 351 -92 x509_akid_machine 93 - -93 buck_set_suspend_value 93 - -93 x509_extract_key_data 98 - -98 static.efi_reserve_memory 101 - -101 buck_get_suspend_value 101 - -101 x509_action_table 104 - -104 x509_note_OID 105 - -105 pldo_get_enable 108 - -108 x509_machine 113 - -113 overlay_adjust_node_phandles 117 - -117 static.reg_set_enable 118 - -118 x509_process_extension 125 - -125 x509_note_signature 129 - -129 switch_get_enable 130 - -130 nldo_set_enable 130 - -130 pkcs7_note_OID 136 - -136 pkcs7_action_table 136 - -136 pldo_set_enable 141 - -141 static.__alloc_extent_buffer 146 - -146 switch_set_enable 150 - -150 oid_index 150 - -150 static.hash_init_sha384 152 - -152 sha512_base_do_finalize 154 - -154 unregister_package_notify 169 - -169 duplicate_device_path 180 - -180 ldo_get_suspend_enable 182 - -182 pkcs7_note_signed_info 187 - -187 append_device_node 188 - -188 mscode_note_content_type 189 - -189 pkcs7_sig_note_digest_algo 190 - -190 append_device_path 190 - -190 get_device_path_size 191 - -191 efi_open_volume 191 - -191 static.sha256_update 194 - -194 static.sha512_base_do_update 195 - -195 ldo_set_suspend_enable 195 - -195 set_keyboard_layout 196 - -196 sqfs_tokenize 197 - -197 montMul 198 - -198 is_device_path_multi_instance 201 - -201 usb_emul_find_devnum 206 - -206 export_package_lists 206 - -206 look_up_OID 207 - -207 remove_package_list 208 - -208 dfu_handle 213 - -213 static.sha1_update 216 - -216 overlay_get_target 220 - -220 register_package_notify 222 - -222 create_device_node 222 - -222 dm_pciauto_exp_link_stable 227 - -227 get_package_list_handle 231 - -231 pkcs7_machine 239 - -239 static.sprint_oid 241 - -241 lib_asn1_pkcs7 244 - -244 sha256_k 256 - -256 buck_set_suspend_enable 264 - -264 pkcs7_sig_note_authenticated_attr 268 - -268 static.efi_tcg2_get_active_pcr_banks 273 - -273 buck_get_suspend_enable 276 - -276 sha1_finish 288 - -288 lib_asn1_pkey 290 - -290 get_next_device_path_instance 290 - -290 x509_note_pkey_algo 291 - -291 static.spi_set_speed_mode 291 - -291 efi_convert_device_node_to_text 293 - -293 oid_search_table 296 - -296 get_secondary_languages 301 - -301 append_device_path_instance 311 - -311 static.efi_tcg2_notify_exit_boot_services 316 - -316 sha256_finish 357 32 -325 mscode_note_digest_algo 327 - -327 find_keyboard_layouts 339 - -339 static.efi_tcg2_submit_command 351 - -351 get_keyboard_layout 355 - -355 new_package_list 359 - -359 efi_disconnect_all_drivers 359 - -359 efi_convert_device_path_to_text 359 - -359 get_string 526 166 -360 static.efi_tcg2_get_eventlog 361 - -361 update_package_list 374 - -374 efi_uninstall_protocol 396 - -396 list_package_lists 398 - -398 get_languages 402 - -402 static.load_full_partition 417 - -417 lib_asn1_x509 423 - -423 static.x509_fabricate_name 428 - -428 static.longest_match 428 - -428 set_string 448 - -448 new_string 450 - -450 static.find_and_setup_root 460 - -460 static.efi_tcg2_get_capability 462 - -462 overlay_update_local_node_references 479 - -479 sqfs_resolve_symlink 505 - -505 oid_data 513 - -513 static.public_key 540 - -540 sqfs_frag_lookup 601 - -601 static.efi_tcg2_hash_log_extend_event 622 - -622 dfu_bind 637 - -637 dm_pciauto_setup_device 743 - -743 static.x509_decode_time 779 - -779 static.ta_avb_invoke_func 783 - -783 x509_cert_parse 973 179 -794 static.ta_rpc_test_invoke_func 812 - -812 static.read_persistent_digest 829 - -829 pci_uclass_pre_probe 832 - -832 cert_data 971 - -971 sqfs_search_dir 1332 - -1332 simple_panel_get_edid_timing 1381 - -1381 asn1_ber_decoder 1511 - -1511 static.read_one_chunk 1610 - -1610 rsa_verify_with_pkey 1680 - -1680 static.run_test 1710 - -1710 sha512_block_fn 1714 - -1714 image_pk7 1811 - -1811 MD5Transform 1812 - -1812 sandbox_tpm2_xfer 2605 - -2605 pci_uclass_post_probe 3570 - -3570 sha1_process_one 8090 - -8090 sha256_process_one 9972 - -9972 ``` Raymond Mao (28): CI: Exclude MbedTLS subtree for CONFIG checks mbedtls: add mbedtls into the build system lib: Adapt digest header files to MbedTLS md5: Remove md5 non-watchdog API sha1: Remove sha1 non-watchdog API mbedtls: add digest shim layer for MbedTLS hash: integrate hash on mbedtls mbedtls: Enable smaller implementation for SHA256/512 mbedtls/external: support Microsoft Authentication Code mbedtls/external: support PKCS9 Authenticate Attributes mbedtls/external: support decoding multiple signer's cert mbedtls/external: update MbedTLS PKCS7 test suites public_key: move common functions to public key helper x509: move common functions to x509 helper pkcs7: move common functions to PKCS7 helper mbedtls: add public key porting layer lib/crypto: Adapt public_key header with MbedTLS mbedtls: add X509 cert parser porting layer lib/crypto: Adapt x509_cert_parser to MbedTLS mbedtls: add PKCS7 parser porting layer lib/crypto: Adapt PKCS7 parser to MbedTLS mbedtls: add MSCode parser porting layer lib/crypto: Adapt mscode_parser to MbedTLS mbedtls: add RSA helper layer on MbedTLS lib/rypto: Adapt rsa_helper to MbedTLS asn1_decoder: add build options for ASN1 decoder test: Remove ASN1 library test configs: enable MbedTLS as default setting .azure-pipelines.yml | 3 +- .gitlab-ci.yml | 3 +- Makefile | 6 + board/friendlyarm/nanopi2/board.c | 3 +- board/gdsys/a38x/hre.c | 2 +- board/intel/edison/edison.c | 3 +- board/xilinx/zynq/bootimg.c | 2 +- common/hash.c | 146 +++++ configs/qemu_arm64_defconfig | 1 + configs/sandbox_defconfig | 1 + include/crypto/mscode.h | 4 + include/crypto/pkcs7_parser.h | 56 ++ include/crypto/public_key.h | 6 + include/crypto/x509_parser.h | 55 ++ include/limits.h | 25 + include/linux/kernel.h | 13 +- include/stdlib.h | 1 + include/u-boot/md5.h | 14 +- include/u-boot/sha1.h | 37 +- include/u-boot/sha256.h | 20 + include/u-boot/sha512.h | 9 + lib/Kconfig | 4 + lib/Makefile | 14 +- lib/crypto/Kconfig | 2 +- lib/crypto/Makefile | 16 +- lib/crypto/asymmetric_type.c | 2 +- lib/crypto/pkcs7_helper.c | 37 ++ lib/crypto/pkcs7_parser.c | 28 - lib/crypto/public_key.c | 31 -- lib/crypto/public_key_helper.c | 39 ++ lib/crypto/x509_helper.c | 64 +++ lib/crypto/x509_public_key.c | 58 +- lib/mbedtls/Kconfig | 424 +++++++++++++++ lib/mbedtls/Makefile | 56 ++ .../external/mbedtls/include/mbedtls/oid.h | 35 ++ .../external/mbedtls/include/mbedtls/pkcs7.h | 21 + lib/mbedtls/external/mbedtls/library/pkcs7.c | 154 ++++-- .../tests/suites/test_suite_pkcs7.data | 4 +- lib/mbedtls/mbedtls_def_config.h | 75 +++ lib/mbedtls/md5.c | 57 ++ lib/mbedtls/mscode_parser.c | 123 +++++ lib/mbedtls/pkcs7_parser.c | 506 ++++++++++++++++++ lib/mbedtls/port/assert.h | 12 + lib/mbedtls/public_key.c | 82 +++ lib/mbedtls/rsa_helper.c | 95 ++++ lib/mbedtls/sha1.c | 99 ++++ lib/mbedtls/sha256.c | 62 +++ lib/mbedtls/sha512.c | 93 ++++ lib/mbedtls/x509_cert_parser.c | 447 ++++++++++++++++ lib/md5.c | 14 - lib/sha1.c | 13 - lib/tpm-v1.c | 2 +- test/Kconfig | 2 +- 53 files changed, 2849 insertions(+), 232 deletions(-) create mode 100644 include/limits.h create mode 100644 lib/crypto/pkcs7_helper.c create mode 100644 lib/crypto/public_key_helper.c create mode 100644 lib/crypto/x509_helper.c create mode 100644 lib/mbedtls/Kconfig create mode 100644 lib/mbedtls/Makefile create mode 100644 lib/mbedtls/mbedtls_def_config.h create mode 100644 lib/mbedtls/md5.c create mode 100644 lib/mbedtls/mscode_parser.c create mode 100644 lib/mbedtls/pkcs7_parser.c create mode 100644 lib/mbedtls/port/assert.h create mode 100644 lib/mbedtls/public_key.c create mode 100644 lib/mbedtls/rsa_helper.c create mode 100644 lib/mbedtls/sha1.c create mode 100644 lib/mbedtls/sha256.c create mode 100644 lib/mbedtls/sha512.c create mode 100644 lib/mbedtls/x509_cert_parser.c -- 2.25.1

5 77