April 2024 - U-Boot

[PATCH] nand: Add a watch command
by Miquel Raynal 02 Dec '24

02 Dec '24

This is a debug command to monitor the retention state of the data on the array. The command needs a duplication of the mtd_read_oob() function to actually return the maximum number of bitflips encountered while reading the page. We could write a specific implementation for the Sunxi driver but this is probably enough. nand watch <off> <size> - check an area for bitflips nand watch.part <part> - check a partition for bitflips nand watch.chip - check the whole device for bitflips The output may be a bit verbose and could look like: => nand watch.chip device 0 whole chip size adjusted to 0xff60000 (5 bad blocks) NAND watch for bitflips in area 0x0-0xff60000: Page 0 (0x00000000) -> error -74 Page 1 (0x00000800) -> error -74 Page 2 (0x00001000) -> error -74 Page 3 (0x00001800) -> error -74 Page 4 (0x00002000) -> error -74 Page 5 (0x00002800) -> error -74 Page 6 (0x00003000) -> error -74 Page 7 (0x00003800) -> error -74 Page 8 (0x00004000) -> error -74 Page 9 (0x00004800) -> error -74 Page 10 (0x00005000) -> error -74 Page 11 (0x00005800) -> error -74 Page 12 (0x00006000) -> error -74 Page 13 (0x00006800) -> error -74 Page 14 (0x00007000) -> error -74 Page 15 (0x00007800) -> error -74 Page 16 (0x00008000) -> error -74 Page 17 (0x00008800) -> error -74 Page 18 (0x00009000) -> error -74 Page 19 (0x00009800) -> error -74 Page 20 (0x0000a000) -> error -74 Page 21 (0x0000a800) -> error -74 Page 22 (0x0000b000) -> error -74 Page 23 (0x0000b800) -> error -74 Page 1110 (0x0022b000) -> up to 1 bf/chunk Page 1122 (0x00231000) -> up to 1 bf/chunk Page 1132 (0x00236000) -> up to 1 bf/chunk Page 1362 (0x002a9000) -> up to 1 bf/chunk Page 4990 (0x009bf000) -> up to 1 bf/chunk Page 5728 (0x00b30000) -> up to 1 bf/chunk Page 7116 (0x00de6000) -> up to 1 bf/chunk Page 7160 (0x00dfc000) -> up to 1 bf/chunk Page 7494 (0x00ea3000) -> up to 1 bf/chunk Page 10842 (0x0152d000) -> up to 1 bf/chunk Page 11614 (0x016af000) -> up to 1 bf/chunk Page 11970 (0x01761000) -> up to 1 bf/chunk Page 12536 (0x0187c000) -> up to 1 bf/chunk Page 12687 (0x018c7800) -> up to 1 bf/chunk Page 14298 (0x01bed000) -> up to 1 bf/chunk Page 18268 (0x023ae000) -> up to 1 bf/chunk Page 18760 (0x024a4000) -> up to 1 bf/chunk Page 21440 (0x029e0000) -> up to 1 bf/chunk Page 22336 (0x02ba0000) -> up to 1 bf/chunk Page 22592 (0x02c20000) -> up to 1 bf/chunk Page 23872 (0x02ea0000) -> up to 1 bf/chunk Page 27584 (0x035e0000) -> up to 1 bf/chunk Page 35008 (0x04460000) -> up to 1 bf/chunk Page 37184 (0x048a0000) -> up to 1 bf/chunk Page 41728 (0x05180000) -> up to 1 bf/chunk Page 42176 (0x05260000) -> up to 1 bf/chunk Page 43200 (0x05460000) -> up to 1 bf/chunk Page 43328 (0x054a0000) -> up to 1 bf/chunk Page 45376 (0x058a0000) -> up to 1 bf/chunk Page 47040 (0x05be0000) -> up to 1 bf/chunk Page 47552 (0x05ce0000) -> up to 1 bf/chunk Page 49344 (0x06060000) -> up to 1 bf/chunk Page 49856 (0x06160000) -> up to 1 bf/chunk Page 62784 (0x07aa0000) -> up to 1 bf/chunk Page 65153 (0x07f40800) -> up to 1 bf/chunk Page 65228 (0x07f66000) -> up to 1 bf/chunk Page 65382 (0x07fb3000) -> up to 1 bf/chunk Page 98624 (0x0c0a0000) -> up to 1 bf/chunk Page 101952 (0x0c720000) -> up to 1 bf/chunk Page 107584 (0x0d220000) -> up to 1 bf/chunk Page 118208 (0x0e6e0000) -> up to 1 bf/chunk Page 126656 (0x0f760000) -> up to 1 bf/chunk Page 127680 (0x0f960000) -> up to 1 bf/chunk Page 129920 (0x0fdc0000) -> up to 1 bf/chunk Maximum number of bitflips: 1 Pages with bitflips: 44/130752 It is also possible to reduce the output with the .quiet suffix in order to just show the summary. => nand watch.chip device 0 whole chip size adjusted to 0xff60000 (5 bad blocks) NAND watch for bitflips in area 0x0-0xff60000: Maximum number of bitflips: 1 Pages with bitflips: 44/130752 Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com> --- Hello, I recently came across a batch of NANDs with a lot of "natural" bitflips so in order to easily and objectively characterize how unstable these parts were, I wrote this little tool which was pretty handy to have in U-Boot. I believe it can be useful for others as well, so here is the patch. Cheers, Miquèl cmd/Kconfig | 5 ++ cmd/nand.c | 103 ++++++++++++++++++++++++++++++++++++++++ drivers/mtd/mtdcore.c | 22 +++++++++ include/linux/mtd/mtd.h | 1 + 4 files changed, 131 insertions(+) diff --git a/cmd/Kconfig b/cmd/Kconfig index 451baa3ecac..0524328d373 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1384,6 +1384,11 @@ config CMD_NAND_TORTURE help NAND torture support. +config CMD_NAND_WATCH + bool "nand watch" + help + NAND watch bitflip support. + endif # CMD_NAND config CMD_NVME diff --git a/cmd/nand.c b/cmd/nand.c index 71b8f964429..3bf67f5b65e 100644 --- a/cmd/nand.c +++ b/cmd/nand.c @@ -231,6 +231,54 @@ free_dat: return ret; } +#ifdef CONFIG_CMD_NAND_WATCH +static int nand_watch_bf(struct mtd_info *mtd, ulong off, ulong size, bool quiet) +{ + unsigned int max_bf = 0, pages_wbf = 0; + unsigned int first_page, pages, i; + struct mtd_oob_ops ops = {}; + u_char *buf; + int ret; + + buf = memalign(ARCH_DMA_MINALIGN, mtd->writesize); + if (!buf) { + puts("No memory for page buffer\n"); + return 1; + } + + first_page = off / mtd->writesize; + pages = size / mtd->writesize; + + ops.datbuf = buf; + ops.len = mtd->writesize; + for (i = first_page; i < first_page + pages; i++) { + ulong addr = mtd->writesize * i; + ret = mtd_read_oob_bf(mtd, addr, &ops); + if (ret < 0) { + if (quiet) + continue; + + printf("Page %7d (0x%08lx) -> error %d\n", + i, addr, ret); + } else if (ret) { + max_bf = max(max_bf, (unsigned int)ret); + pages_wbf++; + if (quiet) + continue; + printf("Page %7d (0x%08lx) -> up to %2d bf/chunk\n", + i, addr, ret); + } + } + + printf("Maximum number of bitflips: %u\n", max_bf); + printf("Pages with bitflips: %u/%u\n", pages_wbf, pages); + + free(buf); + + return 0; +} +#endif + /* ------------------------------------------------------------------------- */ static int set_dev(int dev) @@ -778,6 +826,55 @@ static int do_nand(struct cmd_tbl *cmdtp, int flag, int argc, return ret == 0 ? 0 : 1; } +#ifdef CONFIG_CMD_NAND_WATCH + if (strncmp(cmd, "watch", 5) == 0) { + int args = 2; + + if (cmd[5]) { + if (!strncmp(&cmd[5], ".part", 5)) { + args = 1; + } else if (!strncmp(&cmd[5], ".chip", 5)) { + args = 0; + } else { + goto usage; + } + } + + if (cmd[10]) + if (!strncmp(&cmd[10], ".quiet", 6)) + quiet = true; + + if (argc != 2 + args) + goto usage; + + ret = mtd_arg_off_size(argc - 2, argv + 2, &dev, &off, &size, + &maxsize, MTD_DEV_TYPE_NAND, mtd->size); + if (ret) + return ret; + + /* size is unspecified */ + if (argc < 4) + adjust_size_for_badblocks(&size, off, dev); + + if ((off & (mtd->writesize - 1)) || + (size & (mtd->writesize - 1))) { + printf("Attempt to read non page-aligned data\n"); + return -EINVAL; + } + + ret = set_dev(dev); + if (ret) + return ret; + + mtd = get_nand_dev_by_index(dev); + + printf("\nNAND watch for bitflips in area 0x%llx-0x%llx:\n", + off, off + size); + + return nand_watch_bf(mtd, off, size, quiet); + } +#endif + #ifdef CONFIG_CMD_NAND_TORTURE if (strcmp(cmd, "torture") == 0) { loff_t endoff; @@ -943,6 +1040,12 @@ U_BOOT_LONGHELP(nand, "nand erase.chip [clean] - erase entire chip'\n" "nand bad - show bad blocks\n" "nand dump[.oob] off - dump page\n" +#ifdef CONFIG_CMD_NAND_WATCH + "nand watch <off> <size> - check an area for bitflips\n" + "nand watch.part <part> - check a partition for bitflips\n" + "nand watch.chip - check the whole device for bitflips\n" + "\t\t.quiet - Query only the summary, not the details\n" +#endif #ifdef CONFIG_CMD_NAND_TORTURE "nand torture off - torture one block at offset\n" "nand torture off [size] - torture blocks from off to off+size\n" diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index aa78d41a55e..2baf92a9056 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1126,6 +1126,28 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) } EXPORT_SYMBOL_GPL(mtd_read_oob); +/* This is a bare copy of mtd_read_oob returning the actual number of bitflips */ +int mtd_read_oob_bf(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) +{ + int ret_code; + ops->retlen = ops->oobretlen = 0; + if (!mtd->_read_oob) + return -EOPNOTSUPP; + /* + * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics + * similar to mtd->_read(), returning a non-negative integer + * representing max bitflips. In other cases, mtd->_read_oob() may + * return -EUCLEAN. In all cases, perform similar logic to mtd_read(). + */ + ret_code = mtd->_read_oob(mtd, from, ops); + if (unlikely(ret_code < 0)) + return ret_code; + if (mtd->ecc_strength == 0) + return 0; /* device lacks ecc */ + return ret_code; +} +EXPORT_SYMBOL_GPL(mtd_read_oob_bf); + int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 09f52698877..28afbb86ea9 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -413,6 +413,7 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); +int mtd_read_oob_bf(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, -- 2.34.1

2 2

[PATCH 1/4] virtio: blk: introduce virtio-block erase support
by Dmitrii Merkurev 26 Nov '24

26 Nov '24

Co-developed-by: Cody Schuffelen <schuffelen(a)google.com> Signed-off-by: Cody Schuffelen <schuffelen(a)google.com> Signed-off-by: Dmitrii Merkurev <dimorinny(a)google.com> Cc: Tuomas Tynkkynen <tuomas.tynkkynen(a)iki.fi> Cc: Simon Glass <sjg(a)chromium.org> Cc: Mattijs Korpershoek <mkorpershoek(a)baylibre.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu(a)linaro.org> --- drivers/virtio/virtio_blk.c | 91 +++++++++++++++++++++++++++++++------ drivers/virtio/virtio_blk.h | 47 +++++++++++++++++++ 2 files changed, 124 insertions(+), 14 deletions(-) diff --git a/drivers/virtio/virtio_blk.c b/drivers/virtio/virtio_blk.c index 9581058286..225b65c4d1 100644 --- a/drivers/virtio/virtio_blk.c +++ b/drivers/virtio/virtio_blk.c @@ -19,30 +19,82 @@ struct virtio_blk_priv { struct virtqueue *vq; }; +static const u32 feature[] = { + VIRTIO_BLK_F_WRITE_ZEROES +}; + +static void virtio_blk_init_header_sg(struct udevice *dev, u64 sector, u32 type, + struct virtio_blk_outhdr *out_hdr, struct virtio_sg *sg) +{ + const bool sector_is_needed = type == VIRTIO_BLK_T_IN || + type == VIRTIO_BLK_T_OUT; + + out_hdr->type = cpu_to_virtio32(dev, type); + out_hdr->sector = cpu_to_virtio64(dev, sector_is_needed ? sector : 0); + + sg->addr = out_hdr; + sg->length = sizeof(*out_hdr); +} + +static void virtio_blk_init_write_zeroes_sg(struct udevice *dev, u64 sector, lbaint_t blkcnt, + struct virtio_blk_discard_write_zeroes *wz, + struct virtio_sg *sg) +{ + wz->sector = cpu_to_virtio64(dev, sector); + wz->num_sectors = cpu_to_virtio32(dev, blkcnt); + wz->flags = cpu_to_virtio32(dev, 0); + + sg->addr = wz; + sg->length = sizeof(*wz); +} + +static void virtio_blk_init_status_sg(u8 *status, struct virtio_sg *sg) +{ + sg->addr = status; + sg->length = sizeof(*status); +} + +static void virtio_blk_init_data_sg(void *buffer, lbaint_t blkcnt, struct virtio_sg *sg) +{ + sg->addr = buffer; + sg->length = blkcnt * 512; +} + static ulong virtio_blk_do_req(struct udevice *dev, u64 sector, lbaint_t blkcnt, void *buffer, u32 type) { struct virtio_blk_priv *priv = dev_get_priv(dev); + struct virtio_blk_outhdr out_hdr; + struct virtio_blk_discard_write_zeroes wz_hdr; unsigned int num_out = 0, num_in = 0; + struct virtio_sg hdr_sg, wz_sg, data_sg, status_sg; struct virtio_sg *sgs[3]; u8 status; int ret; - struct virtio_blk_outhdr out_hdr = { - .type = cpu_to_virtio32(dev, type), - .sector = cpu_to_virtio64(dev, sector), - }; - struct virtio_sg hdr_sg = { &out_hdr, sizeof(out_hdr) }; - struct virtio_sg data_sg = { buffer, blkcnt * 512 }; - struct virtio_sg status_sg = { &status, sizeof(status) }; - + virtio_blk_init_header_sg(dev, sector, type, &out_hdr, &hdr_sg); sgs[num_out++] = &hdr_sg; - if (type & VIRTIO_BLK_T_OUT) - sgs[num_out++] = &data_sg; - else - sgs[num_out + num_in++] = &data_sg; - + switch (type) { + case VIRTIO_BLK_T_IN: + case VIRTIO_BLK_T_OUT: + virtio_blk_init_data_sg(buffer, blkcnt, &data_sg); + if (type & VIRTIO_BLK_T_OUT) + sgs[num_out++] = &data_sg; + else + sgs[num_out + num_in++] = &data_sg; + break; + + case VIRTIO_BLK_T_WRITE_ZEROES: + virtio_blk_init_write_zeroes_sg(dev, sector, blkcnt, &wz_hdr, &wz_sg); + sgs[num_out++] = &wz_sg; + break; + + default: + return -EINVAL; + } + + virtio_blk_init_status_sg(&status, &status_sg); sgs[num_out + num_in++] = &status_sg; log_debug("dev=%s, active=%d, priv=%p, priv->vq=%p\n", dev->name, device_active(dev), priv, priv->vq); @@ -76,6 +128,15 @@ static ulong virtio_blk_write(struct udevice *dev, lbaint_t start, VIRTIO_BLK_T_OUT); } +static ulong virtio_blk_erase(struct udevice *dev, lbaint_t start, + lbaint_t blkcnt) +{ + if (!virtio_has_feature(dev, VIRTIO_BLK_F_WRITE_ZEROES)) + return -EOPNOTSUPP; + + return virtio_blk_do_req(dev, start, blkcnt, NULL, VIRTIO_BLK_T_WRITE_ZEROES); +} + static int virtio_blk_bind(struct udevice *dev) { struct virtio_dev_priv *uc_priv = dev_get_uclass_priv(dev->parent); @@ -105,7 +166,8 @@ static int virtio_blk_bind(struct udevice *dev) desc->bdev = dev; /* Indicate what driver features we support */ - virtio_driver_features_init(uc_priv, NULL, 0, NULL, 0); + virtio_driver_features_init(uc_priv, feature, ARRAY_SIZE(feature), + NULL, 0); return 0; } @@ -132,6 +194,7 @@ static int virtio_blk_probe(struct udevice *dev) static const struct blk_ops virtio_blk_ops = { .read = virtio_blk_read, .write = virtio_blk_write, + .erase = virtio_blk_erase, }; U_BOOT_DRIVER(virtio_blk) = { diff --git a/drivers/virtio/virtio_blk.h b/drivers/virtio/virtio_blk.h index 8d8e02fa2e..b37ba264df 100644 --- a/drivers/virtio/virtio_blk.h +++ b/drivers/virtio/virtio_blk.h @@ -17,6 +17,8 @@ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available */ #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ #define VIRTIO_BLK_F_MQ 12 /* Support more than one vq */ +#define VIRTIO_BLK_F_DISCARD 13 /* Discard is supported */ +#define VIRTIO_BLK_F_WRITE_ZEROES 14 /* Write zeroes is supported */ /* Legacy feature bits */ #ifndef VIRTIO_BLK_NO_LEGACY @@ -65,6 +67,39 @@ struct __packed virtio_blk_config { /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ __u16 num_queues; + + /* the next 3 entries are guarded by VIRTIO_BLK_F_DISCARD */ + /* + * The maximum discard sectors (in 512-byte sectors) for + * one segment. + */ + __u32 max_discard_sectors; + /* + * The maximum number of discard segments in a + * discard command. + */ + __u32 max_discard_seg; + /* Discard commands must be aligned to this number of sectors. */ + __u32 discard_sector_alignment; + + /* the next 3 entries are guarded by VIRTIO_BLK_F_WRITE_ZEROES */ + /* + * The maximum number of write zeroes sectors (in 512-byte sectors) in + * one segment. + */ + __u32 max_write_zeroes_sectors; + /* + * The maximum number of segments in a write zeroes + * command. + */ + __u32 max_write_zeroes_seg; + /* + * Set if a VIRTIO_BLK_T_WRITE_ZEROES request may result in the + * deallocation of one or more of the sectors. + */ + __u8 write_zeroes_may_unmap; + + __u8 unused1[3]; }; /* @@ -93,6 +128,9 @@ struct __packed virtio_blk_config { /* Get device ID command */ #define VIRTIO_BLK_T_GET_ID 8 +/* Write zeroes command */ +#define VIRTIO_BLK_T_WRITE_ZEROES 13 + #ifndef VIRTIO_BLK_NO_LEGACY /* Barrier before this op */ #define VIRTIO_BLK_T_BARRIER 0x80000000 @@ -112,6 +150,15 @@ struct virtio_blk_outhdr { __virtio64 sector; }; +struct virtio_blk_discard_write_zeroes { + /* discard/write zeroes start sector */ + __virtio64 sector; + /* number of discard/write zeroes sectors */ + __virtio32 num_sectors; + /* flags for this range */ + __virtio32 flags; +}; + #ifndef VIRTIO_BLK_NO_LEGACY struct virtio_scsi_inhdr { __virtio32 errors; -- 2.44.0.278.ge034bb2e1d-goog

4 11

[PATCH] mtd: spi-nor: Add support for Macronix flash part
by Tejas Bhumkar 15 Nov '24

15 Nov '24

Added support for Macronix OSPI flash parts MX25UM51345G and MX66UM2G45G, with initial testing conducted on the Tenzing-se1 board using STR mode for basic erase, write, and readback operations. Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar(a)amd.com> --- drivers/mtd/spi/spi-nor-ids.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index f86e7ff8e5..a08f105549 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -267,6 +267,8 @@ const struct flash_info spi_nor_ids[] = { { INFO("mx66l2g45g", 0xc2201c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("mx25l1633e", 0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) }, { INFO("mx25r6435f", 0xc22817, 0, 64 * 1024, 128, SECT_4K) }, + { INFO("mx25um51345g", 0xc2813a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_4B_OPCODES) }, + { INFO("mx66um2g45g", 0xc2803c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_4B_OPCODES) }, { INFO("mx66uw2g345gx0", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, { INFO("mx66lm1g45g", 0xc2853b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, { INFO("mx25lm51245g", 0xc2853a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) }, -- 2.37.6

4 3

[PATCH 1/3] binman: Add nxp_imx8mimage etype
by Marek Vasut 08 Nov '24

08 Nov '24

Add new binman etype derived from mkimage etype which generates configuration input file for mkimage -T imx8mimage, and runs the mkimage on input data. The mkimage -T imx8mimage is used to generate combined image with SPL and DDR PHY blobs which is bootable on i.MX8M. The configuration file generated here is equivalent of imx8mimage.cfg, which is the file passed to '$ mkimage -T imx8mimage -n imx8mimage.cfg ...' . The settings generated into the imx8mimage.cfg file are configured via supported binman DT properties, nxp,boot-from, nxp,loader-address, nxp,rom-version. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-imx(a)nxp.com> Cc: Adam Ford <aford173(a)gmail.com> Cc: Alper Nebi Yasak <alpernebiyasak(a)gmail.com> Cc: Andrejs Cainikovs <andrejs.cainikovs(a)toradex.com> Cc: Angus Ainslie <angus(a)akkea.ca> Cc: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Francesco Dolcini <francesco.dolcini(a)toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Cc: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> Cc: Simon Glass <sjg(a)chromium.org> Cc: Stefan Eichenberger <stefan.eichenberger(a)toradex.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Tim Harvey <tharvey(a)gateworks.com> Cc: Tom Rini <trini(a)konsulko.com> Cc: kernel(a)puri.sm Cc: u-boot(a)dh-electronics.com Cc: u-boot(a)lists.denx.de --- tools/binman/etype/nxp_imx8mimage.py | 73 ++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 tools/binman/etype/nxp_imx8mimage.py diff --git a/tools/binman/etype/nxp_imx8mimage.py b/tools/binman/etype/nxp_imx8mimage.py new file mode 100644 index 00000000000..5a106e0a76e --- /dev/null +++ b/tools/binman/etype/nxp_imx8mimage.py @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2023-2024 Marek Vasut <marex(a)denx.de> +# Written with much help from Simon Glass <sjg(a)chromium.org> +# +# Entry-type module for generating the i.MX8M mkimage -T imx8mimage +# configuration file and invocation of mkimage -T imx8mimage on the +# configuration file and input data. +# + +from collections import OrderedDict + +from binman.entry import Entry +from binman.etype.mkimage import Entry_mkimage +from binman import elf +from dtoc import fdt_util +from u_boot_pylib import tools + +class Entry_nxp_imx8mimage(Entry_mkimage): + """NXP i.MX8M imx8mimage .cfg file generator and mkimage invoker + + Properties / Entry arguments: + - nxp,boot-from - device to boot from (e.g. 'sd') + - nxp,loader-address - loader address (SPL text base) + - nxp,rom-version - BootROM version ('2' for i.MX8M Nano and Plus) + """ + + def __init__(self, section, etype, node): + super().__init__(section, etype, node) + self.required_props = ['nxp,boot-from', 'nxp,rom-version', 'nxp,loader-address'] + + def ReadNode(self): + super().ReadNode() + self.boot_from = fdt_util.GetString(self._node, 'nxp,boot-from') + self.loader_address = fdt_util.GetInt(self._node, 'nxp,loader-address') + self.rom_version = fdt_util.GetInt(self._node, 'nxp,rom-version') + self.ReadEntries() + + def BuildSectionData(self, required): + _, input_fname, uniq = self.collect_contents_to_file( + self._entries.values(), 'input') + # Generate mkimage configuration file similar to imx8mimage.cfg + # and pass it to mkimage to generate SPL image for us here. + cfg_fname = tools.get_output_filename('nxp.imx8mimage.cfg.%s' % uniq) + with open(cfg_fname, 'w') as outf: + print('ROM_VERSION v%d' % self.rom_version, file=outf) + print('BOOT_FROM %s' % self.boot_from, file=outf) + print('LOADER %s %#x' % (input_fname, self.loader_address), file=outf) + + output_fname = tools.get_output_filename(f'cfg-out.{uniq}') + args = ['-d', input_fname, '-n', cfg_fname, '-T', 'imx8mimage', + output_fname] + if self.mkimage.run_cmd(*args) is not None: + return tools.read_file(output_fname) + else: + # Bintool is missing; just use the input data as the output + self.record_missing_bintool(self.mkimage) + return data + + def SetImagePos(self, image_pos): + # Customized SoC specific SetImagePos which skips the mkimage etype + # implementation and removes the 0x48 offset introduced there. That + # offset is only used for uImage/fitImage, which is not the case in + # here. + upto = 0x00 + for entry in super().GetEntries().values(): + entry.SetOffsetSize(upto, None) + + # Give up if any entries lack a size + if entry.size is None: + return + upto += entry.size + + super(Entry_mkimage, self).SetImagePos(image_pos) -- 2.43.0

5 8

[PATCH] mtd: spi-nor: Clear Winbond SR3 WPS bit on boot
by Marek Vasut 24 Oct '24

24 Oct '24

Some Winbond SPI NORs have special SR3 register which is used among other things to control whether non-standard "Individual Block/Sector Write Protection" (WPS bit) locking scheme is activated. This non-standard locking scheme is not supported by either U-Boot or Linux SPI NOR stack so make sure it is disabled, otherwise the SPI NOR may appear locked for no obvious reason. This SR3 WPS appears e.g. on W25Q16FW which has the same ID as W25Q16DW, but the W25Q16DW does not implement the SR3 WPS bit. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Hai Pham <hai.pham.ud(a)renesas.com> Cc: Heinrich Schuchardt <xypron.glpk(a)gmx.de> Cc: Jagan Teki <jagan(a)amarulasolutions.com> Cc: Johann Neuhauser <jneuhauser(a)dh-electronics.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Takahiro Kuwano <Takahiro.Kuwano(a)infineon.com> Cc: Venkatesh Yadav Abbarapu <venkatesh.abbarapu(a)amd.com> Cc: Vignesh R <vigneshr(a)ti.com> --- drivers/mtd/spi/spi-nor-core.c | 47 ++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 5 ++++ 2 files changed, 52 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 9a1801ba93d..68dee57258d 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -544,6 +544,24 @@ static int read_cr(struct spi_nor *nor) } #endif +/** + * read_sr3() - Read status register 3 unique to newer Winbond flashes + * @nor: pointer to a 'struct spi_nor' + */ +static int read_sr3(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDSR3, &val, 1); + if (ret < 0) { + dev_dbg(nor->dev, "error %d reading SR3\n", ret); + return ret; + } + + return val; +} + /* * Write status register 1 byte * Returns negative if error occurred. @@ -554,6 +572,17 @@ static int write_sr(struct spi_nor *nor, u8 val) return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); } +/** + * write_sr3() - Write status register 3 unique to newer Winbond flashes + * @nor: pointer to a 'struct spi_nor' + * @val: value to be written into SR3 + */ +static int write_sr3(struct spi_nor *nor, u8 val) +{ + nor->cmd_buf[0] = val; + return nor->write_reg(nor, SPINOR_OP_WRSR3, nor->cmd_buf, 1); +} + /* * Set write enable latch with Write Enable command. * Returns negative if error occurred. @@ -3890,6 +3919,24 @@ static int spi_nor_init(struct spi_nor *nor) write_enable(nor); write_sr(nor, 0); spi_nor_wait_till_ready(nor); + + /* + * Some Winbond SPI NORs have special SR3 register which is + * used among other things to control whether non-standard + * "Individual Block/Sector Write Protection" (WPS bit) + * locking scheme is activated. This non-standard locking + * scheme is not supported by either U-Boot or Linux SPI + * NOR stack so make sure it is disabled, otherwise the + * SPI NOR may appear locked for no obvious reason. + */ + if (JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) { + err = read_sr3(nor); + if (err > 0 && err & SR3_WPS) { + write_enable(nor); + write_sr3(nor, err & ~SR3_WPS); + write_disable(nor); + } + } } if (nor->quad_enable) { diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 2861b73edbc..ceb32e3906f 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -45,6 +45,8 @@ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ #define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */ #define SPINOR_OP_WRSR2 0x3e /* Write status register 2 */ +#define SPINOR_OP_RDSR3 0x15 /* Read status register 3 */ +#define SPINOR_OP_WRSR3 0x11 /* Write status register 3 */ #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */ @@ -185,6 +187,9 @@ /* Status Register 2 bits. */ #define SR2_QUAD_EN_BIT7 BIT(7) +/* Status Register 3 bits. */ +#define SR3_WPS BIT(2) + /* For Cypress flash. */ #define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ #define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ -- 2.43.0

4 20

[PATCH 1/2] video: Allow querying the font size
by Simon Glass 18 Oct '24

18 Oct '24

All the font size to be queried using the 'font size' command. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- cmd/font.c | 17 +++++++++-------- doc/usage/cmd/font.rst | 6 ++++-- test/cmd/font.c | 9 +++++++++ 3 files changed, 22 insertions(+), 10 deletions(-) diff --git a/cmd/font.c b/cmd/font.c index cb39c88063f..c7fe2a70a49 100644 --- a/cmd/font.c +++ b/cmd/font.c @@ -56,9 +56,6 @@ static int do_font_size(struct cmd_tbl *cmdtp, int flag, int argc, uint size; int ret; - if (argc != 2) - return CMD_RET_USAGE; - if (uclass_first_device_err(UCLASS_VIDEO_CONSOLE, &dev)) return CMD_RET_FAILURE; ret = vidconsole_get_font_size(dev, &font_name, &size); @@ -67,12 +64,16 @@ static int do_font_size(struct cmd_tbl *cmdtp, int flag, int argc, return CMD_RET_FAILURE; } - size = dectoul(argv[1], NULL); + if (argc < 2) { + printf("%d\n", size); + } else { + size = dectoul(argv[1], NULL); - ret = vidconsole_select_font(dev, font_name, size); - if (ret) { - printf("Failed (error %d)\n", ret); - return CMD_RET_FAILURE; + ret = vidconsole_select_font(dev, font_name, size); + if (ret) { + printf("Failed (error %d)\n", ret); + return CMD_RET_FAILURE; + } } return 0; diff --git a/doc/usage/cmd/font.rst b/doc/usage/cmd/font.rst index 8ba149d7599..fea0df3f745 100644 --- a/doc/usage/cmd/font.rst +++ b/doc/usage/cmd/font.rst @@ -10,7 +10,7 @@ Synopis font list font select <name> [<size>] - font size <size> + font size [<size>] Description ----------- @@ -31,7 +31,7 @@ This selects a new font and optionally changes the size. font size ~~~~~~~~~ -This changes the font size only. +This changes the font size only. With no argument it shows the current size. Examples -------- @@ -41,6 +41,8 @@ Examples => font list nimbus_sans_l_regular cantoraone_regular + => font size + 30 => font size 40 => font select cantoraone_regular 20 => diff --git a/test/cmd/font.c b/test/cmd/font.c index 1fe05c1ead5..9c1eebf799e 100644 --- a/test/cmd/font.c +++ b/test/cmd/font.c @@ -60,10 +60,19 @@ static int font_test_base(struct unit_test_state *uts) ut_assertok(vidconsole_get_font_size(dev, &name, &size)); ut_asserteq_str("cantoraone_regular", name); ut_asserteq(40, size); + ut_assertok(ut_check_console_end(uts)); + + ut_assertok(run_command("font size", 0)); + ut_assert_nextline("40"); + ut_assertok(ut_check_console_end(uts)); ut_assertok(run_command("font size 30", 0)); ut_assertok(ut_check_console_end(uts)); + ut_assertok(run_command("font size", 0)); + ut_assert_nextline("30"); + ut_assertok(ut_check_console_end(uts)); + ut_assertok(vidconsole_get_font_size(dev, &name, &size)); ut_asserteq_str("cantoraone_regular", name); ut_asserteq(30, size); -- 2.34.1

5 7

[PATCH] x86: Make default_print_cpuinfo be a weak alias for print_cpuinfo
by Tom Rini 18 Oct '24

18 Oct '24

While a few SoCs have a unique print_cpuinfo function, a number of them just use default_print_cpuinfo. Make default_print_cpuinfo have a weak alias to provie print_cpuinfo. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- This will make re-using arch/x86/cpu/efi/ as a generic set of support code for U-Boot as EFI payload/app a little bit easier. Cc: Simon Glass <sjg(a)chromium.org> Cc: Bin Meng <bmeng.cn(a)gmail.com> --- arch/x86/cpu/coreboot/coreboot.c | 5 ----- arch/x86/cpu/cpu.c | 2 ++ arch/x86/cpu/efi/app.c | 5 ----- arch/x86/cpu/efi/payload.c | 5 ----- arch/x86/cpu/slimbootloader/slimbootloader.c | 5 ----- arch/x86/cpu/tangier/tangier.c | 5 ----- 6 files changed, 2 insertions(+), 25 deletions(-) diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index 82fe4c71cd27..5c8d32ff6acd 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -44,11 +44,6 @@ int checkcpu(void) return 0; } -int print_cpuinfo(void) -{ - return default_print_cpuinfo(); -} - static void board_final_init(void) { /* diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index ce55efc454bf..5090f5cad746 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -165,6 +165,8 @@ char *cpu_get_name(char *name) return ptr; } +int print_cpuinfo(void) __attribute__((weak, alias("default_print_cpuinfo"))); + int default_print_cpuinfo(void) { printf("CPU: %s, vendor %s, device %xh\n", diff --git a/arch/x86/cpu/efi/app.c b/arch/x86/cpu/efi/app.c index f754489784a7..0eea9e2b0975 100644 --- a/arch/x86/cpu/efi/app.c +++ b/arch/x86/cpu/efi/app.c @@ -19,11 +19,6 @@ int checkcpu(void) return 0; } -int print_cpuinfo(void) -{ - return default_print_cpuinfo(); -} - void board_final_init(void) { } diff --git a/arch/x86/cpu/efi/payload.c b/arch/x86/cpu/efi/payload.c index 708bfbe7ee48..2bf4fefc19e6 100644 --- a/arch/x86/cpu/efi/payload.c +++ b/arch/x86/cpu/efi/payload.c @@ -144,11 +144,6 @@ int checkcpu(void) return 0; } -int print_cpuinfo(void) -{ - return default_print_cpuinfo(); -} - /* Find any available tables and copy them to a safe place */ int reserve_arch(void) { diff --git a/arch/x86/cpu/slimbootloader/slimbootloader.c b/arch/x86/cpu/slimbootloader/slimbootloader.c index ec5b87cfd63f..1f98db1f7c77 100644 --- a/arch/x86/cpu/slimbootloader/slimbootloader.c +++ b/arch/x86/cpu/slimbootloader/slimbootloader.c @@ -55,8 +55,3 @@ int checkcpu(void) { return 0; } - -int print_cpuinfo(void) -{ - return default_print_cpuinfo(); -} diff --git a/arch/x86/cpu/tangier/tangier.c b/arch/x86/cpu/tangier/tangier.c index 1e2f6cc8b700..35bbecbf8479 100644 --- a/arch/x86/cpu/tangier/tangier.c +++ b/arch/x86/cpu/tangier/tangier.c @@ -20,8 +20,3 @@ int checkcpu(void) { return 0; } - -int print_cpuinfo(void) -{ - return default_print_cpuinfo(); -} -- 2.34.1

2 1

[PATCH v2] cmd: setexpr: fix no matching string in gsub return empty value
by Massimiliano Minella 16 Oct '24

16 Oct '24

From: Massimiliano Minella <massimiliano.minella(a)se.com> In gsub, when the destination string is empty, the string 't' is provided and the regular expression doesn't match, then the final result is an empty string. Example: => echo ${foo} => setenv foo => setexpr foo gsub e a bar => echo ${foo} => The variable ${foo} should contain "bar" and the lack of match shouldn't be considered an error. This patch fixes the erroneous behavior by removing the return statement and breaking out of the loop in case of lack of match. Also add a test for the no match case. Signed-off-by: Massimiliano Minella <massimiliano.minella(a)se.com> --- Changes in V2: - update documentation to describe the behavior cmd/setexpr.c | 9 ++++----- doc/usage/cmd/setexpr.rst | 1 + test/cmd/setexpr.c | 10 ++++++++++ 3 files changed, 15 insertions(+), 5 deletions(-) diff --git a/cmd/setexpr.c b/cmd/setexpr.c index 233471f6cb..ab76824a32 100644 --- a/cmd/setexpr.c +++ b/cmd/setexpr.c @@ -216,14 +216,12 @@ int setexpr_regex_sub(char *data, uint data_size, char *nbuf, uint nbuf_size, if (res == 0) { if (loop == 0) { debug("%s: No match\n", data); - return 1; } else { - break; + debug("## MATCH ## %s\n", data); } + break; } - debug("## MATCH ## %s\n", data); - if (!s) return 1; @@ -540,7 +538,8 @@ U_BOOT_CMD( " - For each substring matching the regular expression <r> in the\n" " string <t>, substitute the string <s>. The result is\n" " assigned to <name>. If <t> is not supplied, use the old\n" - " value of <name>\n" + " value of <name>. If no substring matching <r> is found in <t>,\n" + " assign <t> to <name>.\n" "setexpr name sub r s [t]\n" " - Just like gsub(), but replace only the first matching substring" #endif diff --git a/doc/usage/cmd/setexpr.rst b/doc/usage/cmd/setexpr.rst index d245a13ca8..593a0ea91e 100644 --- a/doc/usage/cmd/setexpr.rst +++ b/doc/usage/cmd/setexpr.rst @@ -39,6 +39,7 @@ setexpr name gsub <r> <s> [<t>] string <t>, substitute the string <s>. The result is assigned to <name>. If <t> is not supplied, use the old value of <name>. + If no substring matching <r> is found in <t>, assign <t> to <name>. setexpr name sub <r> <s> [<t>] Just like gsub(), but replace only the first matching substring diff --git a/test/cmd/setexpr.c b/test/cmd/setexpr.c index 312593e1e3..ee329e94b8 100644 --- a/test/cmd/setexpr.c +++ b/test/cmd/setexpr.c @@ -179,6 +179,16 @@ static int setexpr_test_regex(struct unit_test_state *uts) val = env_get("mary"); ut_asserteq_str("this is a test", val); + /* No match */ + ut_assertok(run_command("setenv fred 'this is a test'", 0)); + ut_assertok(run_command("setenv mary ''", 0)); + ut_assertok(run_command("setexpr fred gsub us is \"${fred}\"", 0)); + ut_assertok(run_command("setexpr mary gsub us is \"${fred}\"", 0)); + val = env_get("fred"); + ut_asserteq_str("this is a test", val); + val = env_get("mary"); + ut_asserteq_str("this is a test", val); + unmap_sysmem(buf); return 0; -- 2.43.0

4 6

[PATCH] power: mp5416: Fix LDO SVAL for MP5416 PMIC
by Sidharth Prabukumar 10 Oct '24

10 Oct '24

The MP5416 PMIC's LDO set-value formula is incorrect. This patch fixes it by using the correct formula. Signed-off-by: Sidharth Prabukumar <sidharth.prabukumar(a)gmail.com> Cc: Jaehoon Chung <jh80.chung(a)samsung.com> --- include/power/mp5416.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/power/mp5416.h b/include/power/mp5416.h index dc096fed3f..4326baaa42 100644 --- a/include/power/mp5416.h +++ b/include/power/mp5416.h @@ -32,7 +32,7 @@ enum { #define MP5416_VSET_SW3_GVAL(x) ((((x) & 0x7f) * 12500) + 600000) #define MP5416_VSET_SW4_GVAL(x) ((((x) & 0x7f) * 25000) + 800000) #define MP5416_VSET_LDO_GVAL(x) ((((x) & 0x7f) * 25000) + 800000) -#define MP5416_VSET_LDO_SVAL(x) ((((x) & 0x7f) * 25000) + 800000) +#define MP5416_VSET_LDO_SVAL(x) (((x) - 800000) / 25000) #define MP5416_VSET_SW1_SVAL(x) (((x) - 600000) / 12500) #define MP5416_VSET_SW2_SVAL(x) (((x) - 800000) / 25000) #define MP5416_VSET_SW3_SVAL(x) (((x) - 600000) / 12500) -- 2.34.1

3 2

[PATCH] tools: docker: Drop the git user name and email configuration
by Bin Meng 10 Oct '24

10 Oct '24

Since commit b45ab9ca6621 ("CI: Update to QEMU 8.0.3"), the manual patch applying was removed, hence there is no need to do a git user name and email configuration. Signed-off-by: Bin Meng <bmeng(a)tinylab.org> --- tools/docker/Dockerfile | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile index c4a2596b48..c12ed0fd9b 100644 --- a/tools/docker/Dockerfile +++ b/tools/docker/Dockerfile @@ -179,9 +179,6 @@ RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \ RUN git clone https://gitlab.com/qemu-project/qemu.git /tmp/qemu && \ cd /tmp/qemu && \ git checkout v8.0.3 && \ - # config user.name and user.email to make 'git am' happy - git config user.name u-boot && \ - git config user.email u-boot(a)denx.de && \ ./configure --prefix=/opt/qemu --target-list="aarch64-softmmu,arm-softmmu,i386-softmmu,m68k-softmmu,mips-softmmu,mips64-softmmu,mips64el-softmmu,mipsel-softmmu,ppc-softmmu,riscv32-softmmu,riscv64-softmmu,sh4-softmmu,x86_64-softmmu,xtensa-softmmu" && \ make -j$(nproc) all install && \ rm -rf /tmp/qemu -- 2.34.1

3 3