October 2024 - U-Boot

[PATCH] spi: zynq_qspi: Add missing prototype for update_stripe
by Venkatesh Yadav Abbarapu 25 Oct '24

25 Oct '24

Add missing prototype to fix the sparse warning, warning: no previous prototype for 'update_stripe' [-Wmissing-prototypes]. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu(a)amd.com> --- drivers/spi/zynq_qspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c index f5b3fb5c125..4aad3248d9e 100644 --- a/drivers/spi/zynq_qspi.c +++ b/drivers/spi/zynq_qspi.c @@ -734,7 +734,7 @@ static int zynq_qspi_set_mode(struct udevice *bus, uint mode) return 0; } -bool update_stripe(const struct spi_mem_op *op) +static bool update_stripe(const struct spi_mem_op *op) { if (op->cmd.opcode == SPINOR_OP_BE_4K || op->cmd.opcode == SPINOR_OP_CHIP_ERASE || -- 2.17.1

2 1

[PATCH 0/8] rockchip: Add support for FriendlyElec NanoPC-T6 LTS
by Jonas Karlman 25 Oct '24

25 Oct '24

This series picks minimum required commits from v6.12-rc1-dts to add initial support for the FriendlyElec NanoPC-T6 LTS variant. The adc-uclass and rockchip-saradc drivers are adopted to support cases when DM_REGULATOR is disabled and using a fallback voltage reference from the vdd-microvolts prop in DT. Finally board specific code is added to help detect non-LTS vs LTS variant at runtime and nanopc-t6-rk3588_defconfig is extended to enable Kconfig options for updated DTs. Please note that this has only been runtime tested on a non-LTS variant of a NanoPC-T6 board. Jonas Karlman (4): rockchip: rk3588-nanopc-t6: Drop upstream props from u-boot.dtsi adc: Allow use of adc with DM_REGULATOR disabled adc: rockchip-saradc: Use vdd-microvolts prop as fallback rockchip: rk3588-nanopc-t6: Add support for NanoPC-T6 LTS Marcin Juszkiewicz (4): arm64: dts: rockchip: prepare NanoPC-T6 for LTS board arm64: dts: rockchip: move NanoPC-T6 parts to DTS arm64: dts: rockchip: add NanoPC-T6 LTS arm64: dts: rockchip: add SPI flash on NanoPC-T6 arch/arm/dts/rk3588-nanopc-t6-u-boot.dtsi | 16 +- board/friendlyelec/nanopc-t6-rk3588/Makefile | 3 + .../nanopc-t6-rk3588/nanopc-t6-rk3588.c | 59 ++ configs/nanopc-t6-rk3588_defconfig | 12 + drivers/adc/adc-uclass.c | 4 +- drivers/adc/rockchip-saradc.c | 9 +- .../arm64/rockchip/rk3588-nanopc-t6-lts.dts | 60 ++ .../src/arm64/rockchip/rk3588-nanopc-t6.dts | 909 +---------------- .../src/arm64/rockchip/rk3588-nanopc-t6.dtsi | 943 ++++++++++++++++++ 9 files changed, 1092 insertions(+), 923 deletions(-) create mode 100644 board/friendlyelec/nanopc-t6-rk3588/Makefile create mode 100644 board/friendlyelec/nanopc-t6-rk3588/nanopc-t6-rk3588.c create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-nanopc-t6-lts.dts create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-nanopc-t6.dtsi -- 2.46.2

5 20

[PATCH v2 0/3] board: rockchip: Add Hardkernel ODROID-M1S
by Jonas Karlman 25 Oct '24

25 Oct '24

This series add support for the RK3566 based Hardkernel ODROID-M1S and also correct the board compatible used for Hardkernel ODROID-M1. Features tested on a ODROID-M1S 8GB rev1.0 20230906: - SD-card boot - eMMC boot - Ethernet - PCIe/NVMe - USB gadget - USB host Changes in v2: - Fix clean apply on master branch Jonas Karlman (3): arm64: dts: rockchip: Correct vendor prefix for Hardkernel ODROID-M1 arm64: dts: rockchip: Add Hardkernel ODROID-M1S board: rockchip: Add Hardkernel ODROID-M1S arch/arm/dts/rk3566-odroid-m1s-u-boot.dtsi | 3 + arch/arm/mach-rockchip/rk3568/Kconfig | 6 + board/hardkernel/odroid_m1s/Kconfig | 12 + board/hardkernel/odroid_m1s/MAINTAINERS | 6 + configs/odroid-m1s-rk3566_defconfig | 93 +++ doc/board/rockchip/rockchip.rst | 1 + .../src/arm64/rockchip/rk3566-odroid-m1s.dts | 663 ++++++++++++++++++ .../src/arm64/rockchip/rk3568-odroid-m1.dts | 2 +- 8 files changed, 785 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/rk3566-odroid-m1s-u-boot.dtsi create mode 100644 board/hardkernel/odroid_m1s/Kconfig create mode 100644 board/hardkernel/odroid_m1s/MAINTAINERS create mode 100644 configs/odroid-m1s-rk3566_defconfig create mode 100644 dts/upstream/src/arm64/rockchip/rk3566-odroid-m1s.dts -- 2.46.2

4 12

[PATCH 0/2] Add generic function for computing ram_top
by Sughosh Ganu 25 Oct '24

25 Oct '24

The board_get_usable_ram_top() function is used by boards to compute uppermost address of RAM(ram_top) that is to be used by U-Boot -- this need not be the highest RAM address of the platform. This computation happens before U-Boot relocates to its final destination address in RAM. Certain platforms, like the Xilinx boards were computing the ram_top value in an indirect manner, through some LMB API's. Thus it is no longer possible to use these LMB API's to compute the ram_top, as the LMB module gets initialised only after relocation, and the heap memory has been set up. Add generic functionality to compute the value of ram_top which can be used by platforms. Sughosh Ganu (2): common: memtop: add logic to detect ram_top xilinx: use get_mem_top() to compute ram_top board/xilinx/common/board.c | 25 +++++ common/Makefile | 1 + common/memtop.c | 186 ++++++++++++++++++++++++++++++++++++ include/memtop.h | 22 +++++ 4 files changed, 234 insertions(+) create mode 100644 common/memtop.c create mode 100644 include/memtop.h -- 2.34.1

2 5

[PATCH] rockchip: Migrate to use USB_DWC3_GENERIC on RK3328
by Jonas Karlman 25 Oct '24

25 Oct '24

After the full convertion of usb gadget interrupt handling to usb_gadget_generic_ops, it is now possible to use DM_USB_GADGET, DWC2_OTG and DWC3_GENERIC together without causing a build error. Change to use USB_DWC3_GENERIC instead of USB_XHCI_DWC3 to complte the migration initiated in commit 1bc4e8eb1d7f ("rockchip: Migrate to use DM_USB_GADGET on RK3328"). No functional change is intended. Signed-off-by: Jonas Karlman <jonas(a)kwiboo.se> --- This has been tested on a Orange Pi R1 Plus LTS and a NanoPi R2S Plus. --- configs/evb-rk3328_defconfig | 3 +-- configs/nanopi-r2c-plus-rk3328_defconfig | 3 +-- configs/nanopi-r2c-rk3328_defconfig | 3 +-- configs/nanopi-r2s-rk3328_defconfig | 3 +-- configs/orangepi-r1-plus-lts-rk3328_defconfig | 3 +-- configs/orangepi-r1-plus-rk3328_defconfig | 3 +-- 6 files changed, 6 insertions(+), 12 deletions(-) diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig index bfb85223437d..b3790c4d4ae2 100644 --- a/configs/evb-rk3328_defconfig +++ b/configs/evb-rk3328_defconfig @@ -88,13 +88,12 @@ CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_FUNCTION_ROCKUSB=y diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig index f311a0a80ba7..19fab59eff01 100644 --- a/configs/nanopi-r2c-plus-rk3328_defconfig +++ b/configs/nanopi-r2c-plus-rk3328_defconfig @@ -94,13 +94,12 @@ CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_FUNCTION_ROCKUSB=y diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig index 533dc1029f73..65ffdd34d4d1 100644 --- a/configs/nanopi-r2c-rk3328_defconfig +++ b/configs/nanopi-r2c-rk3328_defconfig @@ -94,13 +94,12 @@ CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_FUNCTION_ROCKUSB=y diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig index 2591a9cc8ab2..751da1c446d8 100644 --- a/configs/nanopi-r2s-rk3328_defconfig +++ b/configs/nanopi-r2s-rk3328_defconfig @@ -94,13 +94,12 @@ CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_FUNCTION_ROCKUSB=y diff --git a/configs/orangepi-r1-plus-lts-rk3328_defconfig b/configs/orangepi-r1-plus-lts-rk3328_defconfig index 14cdbd813c81..7786a3514b4d 100644 --- a/configs/orangepi-r1-plus-lts-rk3328_defconfig +++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig @@ -104,13 +104,12 @@ CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_FUNCTION_ROCKUSB=y diff --git a/configs/orangepi-r1-plus-rk3328_defconfig b/configs/orangepi-r1-plus-rk3328_defconfig index 7fe58e7a1467..e2b9ce705ecb 100644 --- a/configs/orangepi-r1-plus-rk3328_defconfig +++ b/configs/orangepi-r1-plus-rk3328_defconfig @@ -104,13 +104,12 @@ CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_FUNCTION_ROCKUSB=y -- 2.46.2

3 2

[PATCH V2 0/4] Anbernic RGxx3 Bootloader Fixes
by Chris Morgan 25 Oct '24

25 Oct '24

From: Chris Morgan <macromorgan(a)hotmail.com> Update the Anbernic RGxx3 "device" to use upstream device-trees, add logic to detect a different vdd_cpu regulator, and implement a fix to allow the panel auto-detection to run when using mainline A-TF. Note that *Linux* still cannot use mainline A-TF because of the missing SCMI clock and reset functionality, but this patch series at least ensures that this board can boot once Linux is ready. Chris Morgan (4): board: rockchip: Convert Anbernic RGxx3 to OF_UPSTREAM board: rockchip: Add vdd_cpu reg fixup for RGXX3 Series board: rockchip: Remove ARM SCMI Support from RGxx3 board: rockchip: Enable PD_VO before driver access .../dts/rk3566-anbernic-rg353p-u-boot.dtsi | 34 ++ .../arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi | 52 --- arch/arm/dts/rk3566-anbernic-rgxx3.dts | 28 -- arch/arm/mach-rockchip/rk3568/rk3568.c | 6 + board/anbernic/rgxx3_rk3566/MAINTAINERS | 4 +- board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 359 +++++++++++++++--- configs/anbernic-rgxx3-rk3566_defconfig | 12 +- 7 files changed, 347 insertions(+), 148 deletions(-) create mode 100644 arch/arm/dts/rk3566-anbernic-rg353p-u-boot.dtsi delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dts -- 2.34.1

5 18

[PATCH] riscv: mbv: Align DT with QEMU
by Michal Simek 25 Oct '24

25 Oct '24

Align U-Boot with QEMU amd-microblaze-v-virt platform to be able to wire it with CI. Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- I am sending it to be in queue. Qemu patch hasn't been merged to qemu yet but here is the latest version. https://lore.kernel.org/r/20241017072507.4033413-1-sai.pavan.boddu@amd.com --- arch/riscv/dts/xilinx-mbv32.dts | 30 ++++++++++-------------------- board/xilinx/mbv/Kconfig | 6 +++--- configs/xilinx_mbv32_defconfig | 12 ++++++------ 3 files changed, 19 insertions(+), 29 deletions(-) diff --git a/arch/riscv/dts/xilinx-mbv32.dts b/arch/riscv/dts/xilinx-mbv32.dts index 48ee11549566..4050ce2f051d 100644 --- a/arch/riscv/dts/xilinx-mbv32.dts +++ b/arch/riscv/dts/xilinx-mbv32.dts @@ -20,7 +20,7 @@ cpus: cpus { #address-cells = <1>; #size-cells = <0>; - timebase-frequency = <102000000>; + timebase-frequency = <100000000>; cpu_0: cpu@0 { compatible = "amd,mbv32", "riscv"; device_type = "cpu"; @@ -28,7 +28,7 @@ riscv,isa = "rv32imafdc"; i-cache-size = <32768>; d-cache-size = <32768>; - clock-frequency = <102000000>; + clock-frequency = <100000000>; cpu0_intc: interrupt-controller { compatible = "riscv,cpu-intc"; interrupt-controller; @@ -46,15 +46,15 @@ stdout-path = "serial0:115200n8"; }; - memory@20000000 { + memory@80000000 { device_type = "memory"; - reg = <0x20000000 0x20000000>; + reg = <0x80000000 0x40000000>; }; - clk102: clock { + clk100: clock { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <102000000>; + clock-frequency = <100000000>; }; axi: axi { @@ -77,30 +77,20 @@ compatible = "xlnx,xps-timer-1.00.a"; reg = <0x41c00000 0x1000>; interrupt-parent = <&axi_intc>; - interrupts = <1 2>; - bootph-all; - xlnx,one-timer-only = <0>; - clock-names = "s_axi_aclk"; - clocks = <&clk102>; - }; - - xlnx_timer1: timer@41c20000 { - compatible = "xlnx,xps-timer-1.00.a"; - reg = <0x41c20000 0x1000>; - interrupt-parent = <&axi_intc>; interrupts = <0 2>; + bootph-all; xlnx,one-timer-only = <0>; clock-names = "s_axi_aclk"; - clocks = <&clk102>; + clocks = <&clk100>; }; uart0: serial@40600000 { compatible = "xlnx,xps-uartlite-1.00.a"; reg = <0x40600000 0x1000>; interrupt-parent = <&axi_intc>; - interrupts = <2 2>; + interrupts = <1 2>; bootph-all; - clocks = <&clk102>; + clocks = <&clk100>; current-speed = <115200>; xlnx,data-bits = <8>; xlnx,use-parity = <0>; diff --git a/board/xilinx/mbv/Kconfig b/board/xilinx/mbv/Kconfig index a3a6f2125770..c52ba1870b0b 100644 --- a/board/xilinx/mbv/Kconfig +++ b/board/xilinx/mbv/Kconfig @@ -10,14 +10,14 @@ config SYS_CPU default "generic" config TEXT_BASE - default 0x21200000 + default 0x81200000 config SPL_TEXT_BASE - default 0x20000000 + default 0x80000000 config SPL_OPENSBI_LOAD_ADDR hex - default 0x20200000 + default 0x80200000 config BOARD_SPECIFIC_OPTIONS def_bool y diff --git a/configs/xilinx_mbv32_defconfig b/configs/xilinx_mbv32_defconfig index 3983b20c2d80..7333413267ec 100644 --- a/configs/xilinx_mbv32_defconfig +++ b/configs/xilinx_mbv32_defconfig @@ -2,17 +2,17 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0xe00000 CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x21200000 +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x81200000 CONFIG_ENV_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" -CONFIG_SPL_STACK=0x20200000 -CONFIG_SPL_BSS_START_ADDR=0x24000000 +CONFIG_SPL_STACK=0x80200000 +CONFIG_SPL_BSS_START_ADDR=0x84000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SYS_LOAD_ADDR=0x20200000 +CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_SPL_SIZE_LIMIT=0x40000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0x40600000 -CONFIG_DEBUG_UART_CLOCK=1000000 +CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_SYS_CLK_FREQ=100000000 CONFIG_BOOT_SCRIPT_OFFSET=0x0 CONFIG_DEBUG_UART=y @@ -20,7 +20,7 @@ CONFIG_TARGET_XILINX_MBV=y # CONFIG_SPL_SMP is not set CONFIG_REMAKE_ELF=y CONFIG_FIT=y -CONFIG_SPL_LOAD_FIT_ADDRESS=0x20200000 +CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 CONFIG_DISTRO_DEFAULTS=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y -- 2.43.0

2 1

[PATCH v2 1/1] fs: ext4: document struct ext2_inode
by Heinrich Schuchardt 25 Oct '24

25 Oct '24

Provide Sphinx style documentation for struct ext2_inode. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> Reviewed-by: Simon Glass <sjg(a)chromium.org> --- v2: add reference to the Linux documentation --- include/ext_common.h | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) diff --git a/include/ext_common.h b/include/ext_common.h index b09bbde116a..6e17fbd2771 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -173,20 +173,38 @@ struct ext2_block_group { __le32 bg_reserved; }; -/* The ext2 inode. */ +/** + * struct ext2_inode - ext2 inode + * + * For details see Linux file + * Documentation/filesystems/ext4/inodes.rst. + */ struct ext2_inode { + /** @mode: file mode */ __le16 mode; + /** @uid: lower 16 bits of owner UID */ __le16 uid; + /** @size: lower 32 bits of file size */ __le32 size; + /** @atime: last access time */ __le32 atime; + /** @ctime: last change time */ __le32 ctime; + /** @mtime: last modification time */ __le32 mtime; + /** @dtime: deletion time */ __le32 dtime; + /** @gid: lower 16 bits of group ID */ __le16 gid; + /** @nlinks: number of hard links */ __le16 nlinks; - __le32 blockcnt; /* Blocks of either 512 or block_size bytes */ + /** @blockcnt: lower 32 bit of block count */ + __le32 blockcnt; + /** @flags: inode flags */ __le32 flags; + /** @osd1: operating system specific data */ __le32 osd1; + /** @b: block map or extent tree */ union { struct datablocks { __le32 dir_blocks[INDIRECT_BLOCKS]; @@ -197,10 +215,19 @@ struct ext2_inode { char symlink[60]; char inline_data[60]; } b; + /** @version: file version (for NFS) */ __le32 version; + /** @acl: lower 32 bit of extended attribute block */ __le32 acl; - __le32 size_high; /* previously dir_acl, but never used */ + /** @size_high - dir_acl on ext2/3, upper 32 size bits on ext4 + * + * In ext2/3 this field was named i_dir_acl, though it was usually set + * to zero and never used. + */ + __le32 size_high; + /** @fragment_addr - (obsolete) fragment address */ __le32 fragment_addr; + /** @osd2: operating system specific data */ __le32 osd2[3]; }; -- 2.45.2

1 0

[PATCH 00/11] boards: siemens: iot2050: SM variant, sysinfo support, fixes & cleanups
by Jan Kiszka 25 Oct '24

25 Oct '24

This series depends on: https://patchwork.ozlabs.org/project/uboot/patch/a54b501a-9a98-426c-a5ca-fa… This adds support for the new IOT2050 SM variant, introduces a sysinfo driver which also permits SMBIOS support and switches the board to OF_UPSTREAM. There are some further fixes for the boards included as well. Not yet included is configuration support for DMA isolation via the PVU as this depends on not yet merged DT bindings and another overlay. Not a merge-dependency but still needed to restore full support for the IOT2050: https://patchwork.ozlabs.org/project/uboot/patch/6c201a24-422a-41f7-846c-1a… Jan CC: Baocheng Su <baocheng.su(a)siemens.com> CC: Li Hua Qian <huaqian.li(a)siemens.com> Baocheng Su (5): board: siemens: iot2050: Fix coding style board: siemens: iot2050: Control pcie power for all variants board: siemens: iot2050: Pass DDR size from FSBL board: siemens: iot2050: Generalize the fdt fixup dts: iot2050: Support new IOT2050-SM variant Jan Kiszka (4): board: siemens: iot2050: Fix mistake in list of writable env vars board: siemens: iot2050: Stop using special spl DT sources board: siemens: iot2050: Migrate to OF_UPSTREAM smbios: Fill UUID from sysinfo when available Li Hua Qian (2): sysinfo: Add driver for IOT2050 boards board: siemens: iot2050: Use sysinfo for board initialization arch/arm/dts/Makefile | 8 - arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 19 +- arch/arm/dts/k3-am65-iot2050-common-pg1.dtsi | 46 -- arch/arm/dts/k3-am65-iot2050-common-pg2.dtsi | 51 -- .../dts/k3-am65-iot2050-common-u-boot.dtsi | 18 + arch/arm/dts/k3-am65-iot2050-common.dtsi | 738 ------------------ arch/arm/dts/k3-am65-iot2050-spl.dts | 17 - .../dts/k3-am6528-iot2050-basic-common.dtsi | 61 -- arch/arm/dts/k3-am6528-iot2050-basic-pg2.dts | 24 - arch/arm/dts/k3-am6528-iot2050-basic.dts | 24 - .../k3-am6548-iot2050-advanced-common.dtsi | 52 -- ...50-advanced-m2-bkey-ekey-pcie-overlay.dtso | 27 - ...iot2050-advanced-m2-bkey-usb3-overlay.dtso | 47 -- .../arm/dts/k3-am6548-iot2050-advanced-m2.dts | 119 --- .../dts/k3-am6548-iot2050-advanced-pg2.dts | 29 - .../k3-am6548-iot2050-advanced-sm-u-boot.dtsi | 1 + arch/arm/dts/k3-am6548-iot2050-advanced.dts | 24 - arch/arm/mach-k3/am65x/Kconfig | 2 + board/siemens/iot2050/board.c | 226 ++++-- configs/iot2050_defconfig | 7 +- doc/board/siemens/iot2050.rst | 7 +- drivers/sysinfo/Kconfig | 7 + drivers/sysinfo/Makefile | 1 + drivers/sysinfo/iot2050.c | 143 ++++ drivers/sysinfo/iot2050.h | 26 + include/configs/iot2050.h | 5 +- include/sysinfo.h | 1 + lib/smbios.c | 4 + 28 files changed, 372 insertions(+), 1362 deletions(-) delete mode 100644 arch/arm/dts/k3-am65-iot2050-common-pg1.dtsi delete mode 100644 arch/arm/dts/k3-am65-iot2050-common-pg2.dtsi delete mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi delete mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts delete mode 100644 arch/arm/dts/k3-am6528-iot2050-basic-common.dtsi delete mode 100644 arch/arm/dts/k3-am6528-iot2050-basic-pg2.dts delete mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts delete mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-common.dtsi delete mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-overlay.dtso delete mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-m2-bkey-usb3-overlay.dtso delete mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts delete mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced-pg2.dts create mode 120000 arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi delete mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts create mode 100644 drivers/sysinfo/iot2050.c create mode 100644 drivers/sysinfo/iot2050.h -- 2.43.0

3 18

[PATCH v1 1/1] : Mark a few functions static inline
by Andy Shevchenko 24 Oct '24

24 Oct '24

The function prototypes that are defined in the header most likely has to be marked as static inline. This helps avoiding the compiler warnings: include/mux.h:120:14: warning: no previous prototype for ‘mux_control_states’ [-Wmissing-prototypes] include/mux.h:125:18: warning: no previous prototype for ‘mux_control_select’ [-Wmissing-prototypes] include/mux.h:133:5: warning: no previous prototype for ‘mux_control_deselect’ [-Wmissing-prototypes] include/mux.h:138:21: warning: no previous prototype for ‘mux_control_get’ [-Wmissing-prototypes] include/mux.h:143:6: warning: no previous prototype for ‘mux_control_put’ [-Wmissing-prototypes] include/mux.h:147:21: warning: no previous prototype for ‘devm_mux_control_get’ [-Wmissing-prototypes] include/mux.h:153:5: warning: no previous prototype for ‘dm_mux_init’ [-Wmissing-prototype ] Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- include/mux.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/include/mux.h b/include/mux.h index e5deaba66f44..cbb1c331db83 100644 --- a/include/mux.h +++ b/include/mux.h @@ -117,40 +117,40 @@ struct mux_control *devm_mux_control_get(struct udevice *dev, int dm_mux_init(void); #else -unsigned int mux_control_states(struct mux_control *mux) +static inline unsigned int mux_control_states(struct mux_control *mux) { return -ENOSYS; } -int __must_check mux_control_select(struct mux_control *mux, - unsigned int state) +static inline int __must_check mux_control_select(struct mux_control *mux, + unsigned int state) { return -ENOSYS; } #define mux_control_try_select(mux, state) mux_control_select(mux, state) -int mux_control_deselect(struct mux_control *mux) +static inline int mux_control_deselect(struct mux_control *mux) { return -ENOSYS; } -struct mux_control *mux_control_get(struct udevice *dev, const char *mux_name) +static inline struct mux_control *mux_control_get(struct udevice *dev, const char *mux_name) { return NULL; } -void mux_control_put(struct mux_control *mux) +static inline void mux_control_put(struct mux_control *mux) { } -struct mux_control *devm_mux_control_get(struct udevice *dev, - const char *mux_name) +static inline struct mux_control *devm_mux_control_get(struct udevice *dev, + const char *mux_name) { return NULL; } -int dm_mux_init(void) +static inline int dm_mux_init(void) { return -ENOSYS; } -- 2.43.0.rc1.1336.g36b5255a03ac

2 1