September 2023 - U-Boot

NVMe support on RPi CM4 board
by Luis Alfredo da Silva 11 Sep '23

11 Sep '23

I compiled u-boot version 2023-07 and boot it on a RPi CM4 using a PCIe M.2 NVMe drive, but it doesn't appear to be working. Once u-boot has started and boot successfully it recognizes the PCIe device giving me the next output U-Boot> pci BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.00.00 0x14e4 0x2711 Bridge device 0x04 01.00.00 0x1c5c 0x174a Mass storage controller 0x08 but when trying to use the nvme scan and nvme info there is not output. NVMe drive has two partitions 1st is a FAT partition, and 2nd is a EXT4 partition, the RPi firmware recognizes the FAT partition and u-boot boot correctly. I don't know if this worked before, but I saw in the mailing list that there could be already support for other ARM64 boards.

2 8

[PATCH v3 0/2] J7200 device tree sync from v6.6-rc1 to u-boot
by Reid Tonking 11 Sep '23

11 Sep '23

This series tries to sync device tree files from Linux v6.6-rc1 while making changes to the u-boot.dtsi and r5-common-proc-board.dts files in order to remove duplicate nodes and achieve successful boot. This is dependent on [0]. This patch was originally a part of v2, but was spun of as a dependency for both j7200 & j721e dtb sync series. DMA fixes [1] are currently being upstreamed to Linux. They'll be fixed in U-boot post their merge in Linux. Test Logs are included in [2] [0]: https://lore.kernel.org/u-boot/20230907180635.89011-1-reidt@ti.com/T/#u [1]: https://lore.kernel.org/all/20230810174356.3322583-1-vigneshr@ti.com/ [2]: https://gist.github.com/Glockn/ecbe92606a8a772486fb9f636dd1f814 --- Changes in v3: - Sync is now ith v6.6-rc1 instead of v6.5-rc1 - &mcu_ringacc property overrides in u-boot.dtsi removed (patch 2/2) - Change to drivers/misc/k3_avs.c is now a separate patch [0] - dropped the trailing white space (patch 1/2) - changed wording in commit message (patch 2/2) - added k3_sysreset node back into u-boot.dtsi (patch 2/2) - Link to v2: https://lore.kernel.org/u-boot/20230905181309.61666-1-reidt@ti.com/T/#m8d25… --- Reid Tonking (2): arm: mach-k3: j7200: Add mcu_timer0 id to the dev list arm: dts: j7200: dts sync with Linux 6.6-rc1 .../k3-j7200-common-proc-board-u-boot.dtsi | 150 ++--- arch/arm/dts/k3-j7200-common-proc-board.dts | 188 +++--- arch/arm/dts/k3-j7200-main.dtsi | 535 +++++++++++++++++- arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 286 +++++++++- .../arm/dts/k3-j7200-r5-common-proc-board.dts | 301 +--------- arch/arm/dts/k3-j7200-som-p0.dtsi | 154 +++-- arch/arm/dts/k3-j7200-thermal.dtsi | 47 ++ arch/arm/dts/k3-j7200.dtsi | 30 +- arch/arm/dts/k3-serdes.h | 204 +++++++ arch/arm/mach-k3/j7200/dev-data.c | 1 + 10 files changed, 1383 insertions(+), 513 deletions(-) create mode 100644 arch/arm/dts/k3-j7200-thermal.dtsi create mode 100644 arch/arm/dts/k3-serdes.h -- 2.34.1

1 2

[PATCH] config: j7200: removed not needed power config
by Udit Kumar 11 Sep '23

11 Sep '23

For J7200, R5/SPL TI_SCI_POWER_DOMAIN should be disabled as DM is a separate binary like other SOC of J7* family. Fixes: 02dff65efe7 (configs: j7200_evm_r5: Add initial support) Signed-off-by: Udit Kumar <u-kumar1(a)ti.com> --- Boot logs https://gist.github.com/uditkumarti/04f053efa73eae8be53666d9a31033c2 configs/j7200_evm_r5_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index 6d240b16cb..9e744ba434 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -126,7 +126,6 @@ CONFIG_SPL_PINCTRL=y # CONFIG_SPL_PINCTRL_GENERIC is not set CONFIG_PINCTRL_SINGLE=y CONFIG_POWER_DOMAIN=y -CONFIG_TI_SCI_POWER_DOMAIN=y CONFIG_TI_POWER_DOMAIN=y CONFIG_DM_PMIC=y CONFIG_PMIC_TPS65941=y -- 2.34.1

3 3

[PATCH] buildman: Disable CONFIG_CMD_CONFIG for reproduceable build
by Simon Glass 11 Sep '23

11 Sep '23

When the ordering of CONFIG options changes, the gzipped CONFIG list can change in size and contents. This makes it hard to compare commits which only different in CONFIG ordering. Disable this when -r is given, to make this easier. Update the documentation as well. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- tools/buildman/buildman.rst | 3 ++- tools/buildman/control.py | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/tools/buildman/buildman.rst b/tools/buildman/buildman.rst index aae2477b5c3d..4cca97dbda8c 100644 --- a/tools/buildman/buildman.rst +++ b/tools/buildman/buildman.rst @@ -1021,7 +1021,8 @@ various files to be rebuilt even if no source changes are made, which in turn requires that the final U-Boot binary be re-linked. This unnecessary work can be avoided by turning off the timestamp feature. This can be achieved using the `-r` flag, which enables reproducible builds by setting -`SOURCE_DATE_EPOCH=0` when building. +`SOURCE_DATE_EPOCH=0` when building, as well as disabling `LOCALVERSION_AUTO` +and `CONFIG_CMD_CONFIG`. Combining all of these options together yields the command-line shown below. This will provide the quickest possible feedback regarding the current content diff --git a/tools/buildman/control.py b/tools/buildman/control.py index f2ffb7f5b4aa..0ce4f2e2f3b5 100644 --- a/tools/buildman/control.py +++ b/tools/buildman/control.py @@ -575,6 +575,10 @@ def calc_adjust_cfg(adjust_cfg, reproducible_builds): print('Not dropping LOCALVERSION_AUTO for reproducible build') else: adjust_cfg['LOCALVERSION_AUTO'] = '~' + if 'CMD_CONFIG' in adjust_cfg: + print('Not dropping CMD_CONFIG for reproducible build') + else: + adjust_cfg['CMD_CONFIG'] = '~' return adjust_cfg -- 2.42.0.283.g2d96d420d3-goog

2 1

[PATCH] arm64: xilinx: Guard distro boot variable generation
by Michal Simek 11 Sep '23

11 Sep '23

When distro boot is disabled there is no reason to generate variables for it. Also do not update boot_targets variable because it would be unused. It is useful for example when standard boot is enabled and distro boot is disabled. Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- board/xilinx/versal-net/board.c | 32 ++++++++++++----- board/xilinx/versal/board.c | 31 +++++++++++----- board/xilinx/zynqmp/zynqmp.c | 56 +++++++++++++++++------------ include/configs/xilinx_versal.h | 6 ++++ include/configs/xilinx_versal_net.h | 6 ++++ include/configs/xilinx_zynqmp.h | 6 ++++ 6 files changed, 97 insertions(+), 40 deletions(-) diff --git a/board/xilinx/versal-net/board.c b/board/xilinx/versal-net/board.c index 7ad299f3a231..c18be0c26c99 100644 --- a/board/xilinx/versal-net/board.c +++ b/board/xilinx/versal-net/board.c @@ -194,7 +194,7 @@ static u8 versal_net_get_bootmode(void) return bootmode; } -int board_late_init(void) +static int boot_targets_setup(void) { u8 bootmode; struct udevice *dev; @@ -205,14 +205,6 @@ int board_late_init(void) char *new_targets; char *env_targets; - if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { - debug("Saved variables - Skipping\n"); - return 0; - } - - if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) - return 0; - bootmode = versal_net_get_bootmode(); puts("Bootmode: "); @@ -320,6 +312,28 @@ int board_late_init(void) env_set("boot_targets", new_targets); } + + return 0; +} + +int board_late_init(void) +{ + int ret; + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) + return 0; + + if (IS_ENABLED(CONFIG_DISTRO_DEFAULTS)) { + ret = boot_targets_setup(); + if (ret) + return ret; + } + return board_late_init_xilinx(); } diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 982a8b3779f1..e4bdd5d7a38b 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -126,7 +126,7 @@ static u8 versal_get_bootmode(void) return bootmode; } -int board_late_init(void) +static int boot_targets_setup(void) { u8 bootmode; struct udevice *dev; @@ -137,14 +137,6 @@ int board_late_init(void) char *new_targets; char *env_targets; - if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { - debug("Saved variables - Skipping\n"); - return 0; - } - - if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) - return 0; - bootmode = versal_get_bootmode(); puts("Bootmode: "); @@ -247,6 +239,27 @@ int board_late_init(void) env_set("boot_targets", new_targets); } + return 0; +} + +int board_late_init(void) +{ + int ret; + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) + return 0; + + if (IS_ENABLED(CONFIG_DISTRO_DEFAULTS)) { + ret = boot_targets_setup(); + if (ret) + return ret; + } + return board_late_init_xilinx(); } diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 0b6d4e57078b..f16280308483 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -384,7 +384,7 @@ static int set_fdtfile(void) return 0; } -int board_late_init(void) +static int boot_targets_setup(void) { u8 bootmode; struct udevice *dev; @@ -394,27 +394,6 @@ int board_late_init(void) const char *mode = NULL; char *new_targets; char *env_targets; - int ret, multiboot; - -#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD) - usb_ether_init(); -#endif - - if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { - debug("Saved variables - Skipping\n"); - return 0; - } - - if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) - return 0; - - ret = set_fdtfile(); - if (ret) - return ret; - - multiboot = multi_boot(); - if (multiboot >= 0) - env_set_hex("multiboot", multiboot); bootmode = zynqmp_get_bootmode(); @@ -525,6 +504,39 @@ int board_late_init(void) free(new_targets); } + return 0; +} + +int board_late_init(void) +{ + int ret, multiboot; + +#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD) + usb_ether_init(); +#endif + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) + return 0; + + ret = set_fdtfile(); + if (ret) + return ret; + + multiboot = multi_boot(); + if (multiboot >= 0) + env_set_hex("multiboot", multiboot); + + if (IS_ENABLED(CONFIG_DISTRO_DEFAULTS)) { + ret = boot_targets_setup(); + if (ret) + return ret; + } + reset_reason(); return board_late_init_xilinx(); diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 98792aba7cce..b634bb1ab705 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -43,6 +43,8 @@ "ramdisk_addr_r=0x02100000\0" \ "script_size_f=0x80000\0" +#if defined(CONFIG_DISTRO_DEFAULTS) + #if defined(CONFIG_MMC_SDHCI_ZYNQ) # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) #else @@ -124,6 +126,10 @@ #include <config_distro_bootcmd.h> +#else /* CONFIG_DISTRO_DEFAULTS */ +# define BOOTENV +#endif /* CONFIG_DISTRO_DEFAULTS */ + /* Initial environment variables */ #ifndef CFG_EXTRA_ENV_SETTINGS #define CFG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h index e17b44093548..2b441da91a10 100644 --- a/include/configs/xilinx_versal_net.h +++ b/include/configs/xilinx_versal_net.h @@ -57,6 +57,8 @@ "ramdisk_addr_r=0x02100000\0" \ "script_size_f=0x80000\0" +#if defined(CONFIG_DISTRO_DEFAULTS) + #if defined(CONFIG_MMC_SDHCI_ZYNQ) # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) #else @@ -125,6 +127,10 @@ #include <config_distro_bootcmd.h> +#else /* CONFIG_DISTRO_DEFAULTS */ +# define BOOTENV +#endif /* CONFIG_DISTRO_DEFAULTS */ + /* Initial environment variables */ #ifndef CFG_EXTRA_ENV_SETTINGS #define CFG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 51f0a4253406..c57ab14d1b97 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -63,6 +63,8 @@ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" \ +#if defined(CONFIG_DISTRO_DEFAULTS) + #if defined(CONFIG_MMC_SDHCI_ZYNQ) # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) #else @@ -174,6 +176,10 @@ #include <config_distro_bootcmd.h> +#else /* CONFIG_DISTRO_DEFAULTS */ +# define BOOTENV +#endif /* CONFIG_DISTRO_DEFAULTS */ + /* Initial environment variables */ #ifndef CFG_EXTRA_ENV_SETTINGS #define CFG_EXTRA_ENV_SETTINGS \ -- 2.36.1

1 1

[PATCH] arm64: versal: Do not define boot command for mini configurations
by Michal Simek 11 Sep '23

11 Sep '23

Mini configuration is not design to boot anything that's why there is no reason to setup boot command. CONFIG_DISTRO_DEFAULTS is disabled anyway. Signed-off-by: Michal Simek <michal.simek(a)amd.com> --- configs/xilinx_versal_mini_defconfig | 2 -- configs/xilinx_versal_mini_emmc0_defconfig | 2 -- configs/xilinx_versal_mini_emmc1_defconfig | 2 -- 3 files changed, 6 deletions(-) diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index 53376db9df30..78be2002fb8a 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -21,8 +21,6 @@ CONFIG_SYS_MEMTEST_END=0x00001000 CONFIG_REMAKE_ELF=y # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_AUTOBOOT is not set -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index 31b3c02f7389..129ddce3ef06 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -17,8 +17,6 @@ CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_AUTOBOOT is not set -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 5480cf1d9cc4..116ec450bda8 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -17,8 +17,6 @@ CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_AUTOBOOT is not set -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -- 2.36.1

1 1

[PATCH] ARM: dts: am335x-pocketbeagle: choose tick-timer
by Trevor Woerner 11 Sep '23

11 Sep '23

Commit 4b2be78ab66c ("time: Fix get_ticks being non-monotonic") requires '/chosen/tick-timer' in device-tree. Otherwise we get: U-Boot 2023.07.02 (Jul 11 2023 - 15:20:44 +0000) CPU : AM335X-GP rev 2.1 Model: TI AM335x PocketBeagle DRAM: 512 MiB Core: 154 devices, 16 uclasses, devicetree: separate Could not initialize timer (err -19) resetting ... Suggested-by: Pierre Lebleu <pierre.lebleu(a)pile-engineering.com> Signed-off-by: Trevor Woerner <twoerner(a)gmail.com> --- arch/arm/dts/am335x-pocketbeagle.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/am335x-pocketbeagle.dts b/arch/arm/dts/am335x-pocketbeagle.dts index b379e3a5570d..02e3aac56064 100644 --- a/arch/arm/dts/am335x-pocketbeagle.dts +++ b/arch/arm/dts/am335x-pocketbeagle.dts @@ -15,6 +15,7 @@ chosen { stdout-path = &uart0; + tick-timer = &timer2; }; leds { -- 2.41.0.327.gaa9166bcc0ba

3 4

[PATCH 1/7] rng: stm32: rename STM32 RNG driver
by Gatien Chevallier 11 Sep '23

11 Sep '23

Rename the RNG driver as it is usable by other STM32 platforms than the STM32MP1x ones. Rename CONFIG_RNG_STM32MP1 to CONFIG_RNG_STM32 Signed-off-by: Gatien Chevallier <gatien.chevallier(a)foss.st.com> --- MAINTAINERS | 2 +- configs/stm32mp15_basic_defconfig | 2 +- configs/stm32mp15_defconfig | 2 +- configs/stm32mp15_trusted_defconfig | 2 +- drivers/rng/Kconfig | 6 +++--- drivers/rng/Makefile | 2 +- drivers/rng/{stm32mp1_rng.c => stm32_rng.c} | 0 7 files changed, 8 insertions(+), 8 deletions(-) rename drivers/rng/{stm32mp1_rng.c => stm32_rng.c} (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 0a10a436bc..a3bffa63d5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -621,7 +621,7 @@ F: drivers/ram/stm32mp1/ F: drivers/remoteproc/stm32_copro.c F: drivers/reset/stm32-reset.c F: drivers/rng/optee_rng.c -F: drivers/rng/stm32mp1_rng.c +F: drivers/rng/stm32_rng.c F: drivers/rtc/stm32_rtc.c F: drivers/serial/serial_stm32.* F: drivers/spi/stm32_qspi.c diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 9ea5aaa714..29b869cf34 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -150,7 +150,7 @@ CONFIG_DM_REGULATOR_STM32_VREFBUF=y CONFIG_DM_REGULATOR_STPMIC1=y CONFIG_REMOTEPROC_STM32_COPRO=y CONFIG_DM_RNG=y -CONFIG_RNG_STM32MP1=y +CONFIG_RNG_STM32=y CONFIG_DM_RTC=y CONFIG_RTC_STM32=y CONFIG_SERIAL_RX_BUFFER=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index 4d0a81f8a8..b061a83f9d 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -123,7 +123,7 @@ CONFIG_DM_REGULATOR_SCMI=y CONFIG_REMOTEPROC_STM32_COPRO=y CONFIG_RESET_SCMI=y CONFIG_DM_RNG=y -CONFIG_RNG_STM32MP1=y +CONFIG_RNG_STM32=y CONFIG_DM_RTC=y CONFIG_RTC_STM32=y CONFIG_SERIAL_RX_BUFFER=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index 0a7d862485..b51eefe652 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -123,7 +123,7 @@ CONFIG_DM_REGULATOR_STPMIC1=y CONFIG_REMOTEPROC_STM32_COPRO=y CONFIG_RESET_SCMI=y CONFIG_DM_RNG=y -CONFIG_RNG_STM32MP1=y +CONFIG_RNG_STM32=y CONFIG_DM_RTC=y CONFIG_RTC_STM32=y CONFIG_SERIAL_RX_BUFFER=y diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig index 5deb5db5b7..1563ff3ab8 100644 --- a/drivers/rng/Kconfig +++ b/drivers/rng/Kconfig @@ -48,11 +48,11 @@ config RNG_OPTEE accessible to normal world but reserved and used by the OP-TEE to avoid the weakness of a software PRNG. -config RNG_STM32MP1 - bool "Enable random number generator for STM32MP1" +config RNG_STM32 + bool "Enable random number generator for STM32" depends on ARCH_STM32MP help - Enable STM32MP1 rng driver. + Enable STM32 rng driver. config RNG_ROCKCHIP bool "Enable random number generator for rockchip crypto rng" diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile index 78f61051ac..192f911e15 100644 --- a/drivers/rng/Makefile +++ b/drivers/rng/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o obj-$(CONFIG_RNG_MSM) += msm_rng.o obj-$(CONFIG_RNG_NPCM) += npcm_rng.o obj-$(CONFIG_RNG_OPTEE) += optee_rng.o -obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o +obj-$(CONFIG_RNG_STM32) += stm32_rng.o obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o obj-$(CONFIG_RNG_SMCCC_TRNG) += smccc_trng.o diff --git a/drivers/rng/stm32mp1_rng.c b/drivers/rng/stm32_rng.c similarity index 100% rename from drivers/rng/stm32mp1_rng.c rename to drivers/rng/stm32_rng.c -- 2.25.1

5 21

[PATCH] ufs: ufs-renesas: Drop include common.h
by Marek Vasut 11 Sep '23

11 Sep '23

The "#include <common.h>" is being phased out in favor of more fine grained header management, i.e. ideally include a subset of headers that are really needed. Remove it from this driver. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Bhupesh Sharma <bhupesh.sharma(a)linaro.org> Cc: Neha Malcom Francis <n-francis(a)ti.com> Cc: Tom Rini <trini(a)konsulko.com> --- drivers/ufs/ufs-renesas.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ufs/ufs-renesas.c b/drivers/ufs/ufs-renesas.c index f6086050cde..ae05bdc8102 100644 --- a/drivers/ufs/ufs-renesas.c +++ b/drivers/ufs/ufs-renesas.c @@ -6,7 +6,6 @@ */ #include <clk.h> -#include <common.h> #include <dm.h> #include <ufs.h> #include <asm/io.h> -- 2.40.1

3 2

[PATCH v3 0/9] New boards support: db845c and qcs404-evb
by Sumit Garg 11 Sep '23

11 Sep '23

Add support for two new boards db845c and qcs404-evb: - db845c is a 96boards compliant platform aka RB3 based on Qualcomm SDM845 SoC. - qcs404-evb is an evaluation board from Qualcomm based on QCS404 SoC. Both these platforms have one thing in common that u-boot is chain-loaded in 64-bit mode via Android Boot Loader (ABL) which is an EFI application. For further details on chain-loading refer to platform specific documentation: - doc/board/qualcomm/sdm845.rst - doc/board/qualcomm/qcs404.rst Changes in v3: - Add clocks re-initialization for UART and eMMC for qcs404-evb. - Pick up Ramon's review tag for patches 1-7. Changes in v2: - Added patch #1 to fix DT node overrides in starqltechn-uboot.dtsi. - Updated patch #2 commit description. - Fixed a typo (s/96Board/96Boards/) in patch #5. Sumit Garg (9): board: starqltechn: Align DT node overrides with sdm845.dtsi arm64: dts: sdm845: Remove redundant u-boot DT properties clocks: sdm845: Import qcom,gcc-sdm845.h uart: sdm845: Fix debug UART pinmux board: qualcomm: Add support for dragonboard845c mmc: msm_sdhci: Add SDCC version 5.0.0 support pinctrl: qcom: Add pinctrl driver for QCS404 SoC clocks: qcom: Add clock driver for QCS404 SoC board: qualcomm: Add support for QCS404 EVB arch/arm/dts/Makefile | 1 + arch/arm/dts/dragonboard845c-uboot.dtsi | 37 +++ arch/arm/dts/dragonboard845c.dts | 44 ++++ arch/arm/dts/qcs404-evb-uboot.dtsi | 24 ++ arch/arm/dts/qcs404-evb.dts | 81 ++++++ arch/arm/dts/sdm845.dtsi | 8 +- arch/arm/dts/starqltechn-uboot.dtsi | 18 +- arch/arm/dts/starqltechn.dts | 2 +- arch/arm/mach-snapdragon/Kconfig | 25 ++ arch/arm/mach-snapdragon/Makefile | 3 + arch/arm/mach-snapdragon/clock-qcs404.c | 79 ++++++ arch/arm/mach-snapdragon/clock-sdm845.c | 3 +- arch/arm/mach-snapdragon/clock-snapdragon.c | 1 + .../include/mach/sysmap-qcs404.h | 40 +++ arch/arm/mach-snapdragon/pinctrl-qcs404.c | 55 ++++ arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 1 + arch/arm/mach-snapdragon/pinctrl-snapdragon.h | 1 + arch/arm/mach-snapdragon/sysmap-qcs404.c | 31 +++ board/qualcomm/dragonboard845c/Kconfig | 12 + board/qualcomm/dragonboard845c/MAINTAINERS | 6 + board/qualcomm/dragonboard845c/Makefile | 9 + board/qualcomm/dragonboard845c/db845c.its | 63 +++++ .../dragonboard845c/dragonboard845c.c | 9 + board/qualcomm/qcs404-evb/Kconfig | 15 ++ board/qualcomm/qcs404-evb/MAINTAINERS | 6 + board/qualcomm/qcs404-evb/Makefile | 6 + board/qualcomm/qcs404-evb/qcs404-evb.c | 33 +++ board/qualcomm/qcs404-evb/qcs404-evb.its | 64 +++++ configs/dragonboard845c_defconfig | 28 ++ configs/qcs404evb_defconfig | 39 +++ doc/board/qualcomm/index.rst | 1 + doc/board/qualcomm/qcs404.rst | 79 ++++++ doc/board/qualcomm/sdm845.rst | 100 ++++++- drivers/mmc/msm_sdhci.c | 96 ++++--- include/configs/dragonboard845c.h | 28 ++ include/configs/qcs404-evb.h | 27 ++ include/dt-bindings/clock/qcom,gcc-qcs404.h | 180 +++++++++++++ include/dt-bindings/clock/qcom,gcc-sdm845.h | 246 ++++++++++++++++++ 38 files changed, 1439 insertions(+), 62 deletions(-) create mode 100644 arch/arm/dts/dragonboard845c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard845c.dts create mode 100644 arch/arm/dts/qcs404-evb-uboot.dtsi create mode 100644 arch/arm/dts/qcs404-evb.dts create mode 100644 arch/arm/mach-snapdragon/clock-qcs404.c create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h create mode 100644 arch/arm/mach-snapdragon/pinctrl-qcs404.c create mode 100644 arch/arm/mach-snapdragon/sysmap-qcs404.c create mode 100644 board/qualcomm/dragonboard845c/Kconfig create mode 100644 board/qualcomm/dragonboard845c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard845c/Makefile create mode 100644 board/qualcomm/dragonboard845c/db845c.its create mode 100644 board/qualcomm/dragonboard845c/dragonboard845c.c create mode 100644 board/qualcomm/qcs404-evb/Kconfig create mode 100644 board/qualcomm/qcs404-evb/MAINTAINERS create mode 100644 board/qualcomm/qcs404-evb/Makefile create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.c create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.its create mode 100644 configs/dragonboard845c_defconfig create mode 100644 configs/qcs404evb_defconfig create mode 100644 doc/board/qualcomm/qcs404.rst create mode 100644 include/configs/dragonboard845c.h create mode 100644 include/configs/qcs404-evb.h create mode 100644 include/dt-bindings/clock/qcom,gcc-qcs404.h create mode 100644 include/dt-bindings/clock/qcom,gcc-sdm845.h -- 2.25.1

5 32