August 2023 - U-Boot

[PATCH v2] rockchip: cru: Enable cpu info support for rk3568
by Kever Yang 12 Aug '23

12 Aug '23

From: Anton <vao(a)asu-vei.ru> Add cru structure definition in head file to support cpu_info driver. Signed-off-by: Anton <vao(a)asu-vei.ru> Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- Changes in v2: Format the patch header, add commit message and signature. arch/arm/include/asm/arch-rockchip/cru.h | 2 ++ arch/arm/include/asm/arch-rockchip/cru_rk3568.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h index 13ea4aba8e..9778790f34 100644 --- a/arch/arm/include/asm/arch-rockchip/cru.h +++ b/arch/arm/include/asm/arch-rockchip/cru.h @@ -15,6 +15,8 @@ # include <asm/arch-rockchip/cru_rk3288.h> #elif defined(CONFIG_ROCKCHIP_RK3399) # include <asm/arch-rockchip/cru_rk3399.h> +#elif defined(CONFIG_ROCKCHIP_RK3568) +#include <asm/arch-rockchip/cru_rk3568.h> #endif /* CRU_GLB_RST_ST */ diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3568.h b/arch/arm/include/asm/arch-rockchip/cru_rk3568.h index 399f19ad21..76f1ad5510 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3568.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3568.h @@ -106,6 +106,8 @@ struct rk3568_cru { unsigned int emmc_con[2];/* Address Offset: 0x0598 */ }; +#define rockchip_cru rk3568_cru + check_member(rk3568_cru, mode_con00, 0xc0); check_member(rk3568_cru, softrst_con[0], 0x400); -- 2.25.1

1 0

[PATCH 0/1] Avoid build failure on veyron board
by Alvaro Fernando García 12 Aug '23

12 Aug '23

I noticed that u-boot stopped building for Veyron boards since commit 533ad9dc, which may also affect other 32bit boards. This series fixes compilation by using div_u64 operation. I apologize for any inconvenient, this is my first patch. Alvaro Fernando García (1): video: avoid build failure on veyron board drivers/video/pwm_backlight.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) -- 2.41.0

3 5

[PATCH v2 1/2] arm64: dts: rockchip: Sync DT from linux-next
by Jagan Teki 12 Aug '23

12 Aug '23

Sync the linux-next from below commit, commit <1642bf66e270> ("arm64: dts: rockchip: add USB2 to rk3588s-rock5a") Also rops the duplicate usb nodes from rk3588s-u-boot.dtsi Signed-off-by: Jagan Teki <jagan(a)edgeble.ai> --- Changes for v2: - Keep sdhci modes for ROCK5B arch/arm/dts/rk3588-edgeble-neu6a.dtsi | 1 - arch/arm/dts/rk3588-edgeble-neu6b-io.dts | 66 +++ arch/arm/dts/rk3588-edgeble-neu6b.dtsi | 359 ++++++++++- arch/arm/dts/rk3588-evb1-v10.dts | 720 ++++++++++++++++++++++- arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 7 - arch/arm/dts/rk3588-rock-5b.dts | 578 +++++++++++++++++- arch/arm/dts/rk3588.dtsi | 112 ++++ arch/arm/dts/rk3588s-u-boot.dtsi | 119 ---- arch/arm/dts/rk3588s.dtsi | 499 +++++++++++++++- include/dt-bindings/ata/ahci.h | 20 + 10 files changed, 2346 insertions(+), 135 deletions(-) create mode 100644 include/dt-bindings/ata/ahci.h diff --git a/arch/arm/dts/rk3588-edgeble-neu6a.dtsi b/arch/arm/dts/rk3588-edgeble-neu6a.dtsi index 38e1a1e25f..727580aaa1 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6a.dtsi +++ b/arch/arm/dts/rk3588-edgeble-neu6a.dtsi @@ -25,7 +25,6 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b-io.dts b/arch/arm/dts/rk3588-edgeble-neu6b-io.dts index e9d5a8bab5..9933765e40 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6b-io.dts +++ b/arch/arm/dts/rk3588-edgeble-neu6b-io.dts @@ -21,7 +21,73 @@ }; }; +&combphy0_ps { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/* FAN */ +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +/* RS232 */ +&uart6 { + pinctrl-0 = <&uart6m0_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* RS485 */ +&uart7 { + pinctrl-0 = <&uart7m2_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b.dtsi b/arch/arm/dts/rk3588-edgeble-neu6b.dtsi index 1c5bcf1280..017559bba3 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6b.dtsi +++ b/arch/arm/dts/rk3588-edgeble-neu6b.dtsi @@ -18,6 +18,42 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; }; &sdhci { @@ -25,8 +61,329 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-init-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/rk3588-evb1-v10.dts b/arch/arm/dts/rk3588-evb1-v10.dts index b91af0204d..229a9111f5 100644 --- a/arch/arm/dts/rk3588-evb1-v10.dts +++ b/arch/arm/dts/rk3588-evb1-v10.dts @@ -38,6 +38,20 @@ regulator-max-microvolt = <12000000>; }; + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_usb>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -47,6 +61,62 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin>; }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; }; &gmac0 { @@ -106,6 +176,12 @@ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -117,13 +193,655 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <2>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_codec_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_codec_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s3: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_1v8_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_0v75_hdmi_edp_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_hdmi_edp_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + pmic@1 { + compatible = "rockchip,rk806"; + reg = <0x01>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, + <&rk806_slave_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_slave_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_slave_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_slave_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_cpu_big1_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big0_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + + vdd_cpu_big0_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_cam_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd1v8_ddr_pll_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd1v8_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_1v8_pll_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_1v8_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v8_cam_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_2v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_pll_s0: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v85_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_cam_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi index 1cd8a57a6f..bfa560ca5f 100644 --- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi +++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi @@ -99,11 +99,6 @@ bootph-all; }; -&sdmmc { - bus-width = <4>; - status = "okay"; -}; - &sdmmc_bus4 { bootph-all; }; @@ -124,8 +119,6 @@ cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_data_strobe &emmc_rstnout>; }; &sfc { diff --git a/arch/arm/dts/rk3588-rock-5b.dts b/arch/arm/dts/rk3588-rock-5b.dts index 95805cb0ad..49d5eb8862 100644 --- a/arch/arm/dts/rk3588-rock-5b.dts +++ b/arch/arm/dts/rk3588-rock-5b.dts @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "rk3588.dtsi" / { @@ -17,6 +18,45 @@ stdout-path = "serial2:1500000n8"; }; + analog-sound { + compatible = "audio-graph-card"; + label = "rk3588-es8316"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -25,6 +65,171 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; }; &sdhci { @@ -32,13 +237,384 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; +&sdmmc { + max-frequency = <200000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB hub, which is powered by vcc5v0_sys */ + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588.dtsi b/arch/arm/dts/rk3588.dtsi index d085e57fbc..6be9bf81c0 100644 --- a/arch/arm/dts/rk3588.dtsi +++ b/arch/arm/dts/rk3588.dtsi @@ -7,6 +7,79 @@ #include "rk3588-pinctrl.dtsi" / { + pipe_phy1_grf: syscon@fd5c0000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c0000 0x0 0x100>; + }; + + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gmac0: ethernet@fe1b0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1b0000 0x0 0x10000>; @@ -55,4 +128,43 @@ queue1 {}; }; }; + + sata1: sata@fe220000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe220000 0 0x1000>; + interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>, + <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>, + <&cru CLK_PIPEPHY1_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy1_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + combphy1_ps: phy@fee10000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee10000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY1>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy1_grf>; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi index c703e41802..f8c10227b0 100644 --- a/arch/arm/dts/rk3588s-u-boot.dtsi +++ b/arch/arm/dts/rk3588s-u-boot.dtsi @@ -13,103 +13,12 @@ status = "okay"; }; - usb_host0_ehci: usb@fc800000 { - compatible = "generic-ehci"; - reg = <0x0 0xfc800000 0x0 0x40000>; - interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host0_ohci: usb@fc840000 { - compatible = "generic-ohci"; - reg = <0x0 0xfc840000 0x0 0x40000>; - interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host1_ehci: usb@fc880000 { - compatible = "generic-ehci"; - reg = <0x0 0xfc880000 0x0 0x40000>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host1_ohci: usb@fc8c0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfc8c0000 0x0 0x40000>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - pmu1_grf: syscon@fd58a000 { bootph-all; compatible = "rockchip,rk3588-pmu1-grf", "syscon"; reg = <0x0 0xfd58a000 0x0 0x2000>; }; - pipe_phy0_grf: syscon@fd5bc000 { - compatible = "rockchip,pipe-phy-grf", "syscon"; - reg = <0x0 0xfd5bc000 0x0 0x100>; - }; - - usb2phy2_grf: syscon@fd5d8000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", - "simple-mfd"; - reg = <0x0 0xfd5d8000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy2: usb2-phy@8000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x8000 0x10>; - interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - status = "disabled"; - - u2phy2_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usb2phy3_grf: syscon@fd5dc000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", - "simple-mfd"; - reg = <0x0 0xfd5dc000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy3: usb2-phy@c000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0xc000 0x10>; - interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - status = "disabled"; - - u2phy3_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - pcie2x1l2: pcie@fe190000 { compatible = "rockchip,rk3588-pcie", "snps,dw-pcie"; #address-cells = <3>; @@ -174,39 +83,11 @@ status = "disabled"; }; - otp: nvmem@fecc0000 { - compatible = "rockchip,rk3588-otp"; - reg = <0x0 0xfecc0000 0x0 0x400>; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - - cpu_id: id@7 { - reg = <0x07 0x10>; - }; - }; - rng: rng@fe378000 { compatible = "rockchip,trngv1"; reg = <0x0 0xfe378000 0x0 0x200>; status = "disabled"; }; - - combphy0_ps: phy@fee00000 { - compatible = "rockchip,rk3588-naneng-combphy"; - reg = <0x0 0xfee00000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, - <&cru PCLK_PHP_ROOT>; - clock-names = "refclk", "apbclk", "phpclk"; - assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; - assigned-clock-rates = <100000000>; - resets = <&cru SRST_P_PCIE2_PHY0>, <&cru SRST_REF_PIPE_PHY0>; - reset-names = "combphy-apb", "combphy"; - rockchip,pipe-grf = <&php_grf>; - rockchip,pipe-phy-grf = <&pipe_phy0_grf>; - status = "disabled"; - }; }; &xin24m { diff --git a/arch/arm/dts/rk3588s.dtsi b/arch/arm/dts/rk3588s.dtsi index fca8503aed..c9f9dd2472 100644 --- a/arch/arm/dts/rk3588s.dtsi +++ b/arch/arm/dts/rk3588s.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/power/rk3588-power.h> #include <dt-bindings/reset/rockchip,rk3588-cru.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/ata/ahci.h> / { compatible = "rockchip,rk3588"; @@ -60,6 +62,8 @@ enable-method = "psci"; capacity-dmips-mhz = <530>; clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <32768>; i-cache-line-size = <64>; @@ -136,6 +140,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -174,6 +180,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -222,6 +230,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -230,6 +240,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -238,6 +250,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -246,6 +260,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -254,6 +270,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -262,6 +280,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -270,6 +290,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -278,6 +300,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -286,6 +310,8 @@ cache-size = <3145728>; cache-line-size = <64>; cache-sets = <4096>; + cache-level = <3>; + cache-unified; }; }; @@ -304,10 +330,6 @@ scmi_clk: protocol@14 { reg = <0x14>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>, - <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clock-rates = <1200000000>, - <1200000000>; #clock-cells = <1>; }; @@ -377,6 +399,50 @@ }; }; + usb_host0_ehci: usb@fc800000 { + compatible = "rockchip,rk3588-ehci", "generic-ehci"; + reg = <0x0 0xfc800000 0x0 0x40000>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; + phys = <&u2phy2_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host0_ohci: usb@fc840000 { + compatible = "rockchip,rk3588-ohci", "generic-ohci"; + reg = <0x0 0xfc840000 0x0 0x40000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; + phys = <&u2phy2_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host1_ehci: usb@fc880000 { + compatible = "rockchip,rk3588-ehci", "generic-ehci"; + reg = <0x0 0xfc880000 0x0 0x40000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; + phys = <&u2phy3_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host1_ohci: usb@fc8c0000 { + compatible = "rockchip,rk3588-ohci", "generic-ohci"; + reg = <0x0 0xfc8c0000 0x0 0x40000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; + phys = <&u2phy3_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + sys_grf: syscon@fd58c000 { compatible = "rockchip,rk3588-sys-grf", "syscon"; reg = <0x0 0xfd58c000 0x0 0x1000>; @@ -387,6 +453,66 @@ reg = <0x0 0xfd5b0000 0x0 0x1000>; }; + pipe_phy0_grf: syscon@fd5bc000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5bc000 0x0 0x100>; + }; + + pipe_phy2_grf: syscon@fd5c4000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c4000 0x0 0x100>; + }; + + usb2phy2_grf: syscon@fd5d8000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d8000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy2: usb2-phy@8000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x8000 0x10>; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; + reset-names = "phy", "apb"; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy2"; + #clock-cells = <0>; + status = "disabled"; + + u2phy2_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb2phy3_grf: syscon@fd5dc000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5dc000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy3: usb2-phy@c000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0xc000 0x10>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; + reset-names = "phy", "apb"; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy3"; + #clock-cells = <0>; + status = "disabled"; + + u2phy3_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + ioc: syscon@fd5f0000 { compatible = "rockchip,rk3588-ioc", "syscon"; reg = <0x0 0xfd5f0000 0x0 0x10000>; @@ -414,7 +540,7 @@ <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, <&cru CLK_GPU>; assigned-clock-rates = - <100000000>, <786432000>, + <1100000000>, <786432000>, <850000000>, <1188000000>, <702000000>, <400000000>, <500000000>, @@ -810,6 +936,57 @@ }; }; + i2s4_8ch: i2s@fddc0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc0000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 0>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S4_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s5_8ch: i2s@fddf0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf0000 0x0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 2>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S5_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s9_8ch: i2s@fddfc000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddfc000 0x0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 23>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S9_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + qos_gpu_m0: qos@fdf35000 { compatible = "rockchip,rk3588-qos", "syscon"; reg = <0x0 0xfdf35000 0x0 0x20>; @@ -1099,6 +1276,52 @@ }; }; + sata0: sata@fe210000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe210000 0 0x1000>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, + <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, + <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy0_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + sata2: sata@fe230000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe230000 0 0x1000>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>, + <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>, + <&cru CLK_PIPEPHY2_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy2_psu PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + sdmmc: mmc@fe2c0000 { compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe2c0000 0x0 0x4000>; @@ -1114,6 +1337,21 @@ status = "disabled"; }; + sdio: mmc@fe2d0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x00 0xfe2d0000 0x00 0x4000>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>; + power-domains = <&power RK3588_PD_SDIO>; + status = "disabled"; + }; + sdhci: mmc@fe2e0000 { compatible = "rockchip,rk3588-dwcmshc"; reg = <0x0 0xfe2e0000 0x0 0x10000>; @@ -1125,6 +1363,9 @@ <&cru TMCLK_EMMC>; clock-names = "core", "bus", "axi", "block", "timer"; max-frequency = <200000000>; + pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>, + <&emmc_cmd>, <&emmc_data_strobe>; + pinctrl-names = "default"; resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, <&cru SRST_T_EMMC>; @@ -1132,6 +1373,103 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe470000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe470000 0x0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdi1 + &i2s0_sdi2 + &i2s0_sdi3 + &i2s0_sdo0 + &i2s0_sdo1 + &i2s0_sdo2 + &i2s0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe480000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe480000 0x0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_lrck + &i2s1m0_sclk + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@fe490000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe490000 0x0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 0>, <&dmac1 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m1_lrck + &i2s2m1_sclk + &i2s2m1_sdi + &i2s2m1_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3_2ch: i2s@fe4a0000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe4a0000 0x0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 2>, <&dmac1 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s3_lrck + &i2s3_sclk + &i2s3_sdi + &i2s3_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe600000 { compatible = "arm,gic-v3"; reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ @@ -1141,7 +1479,24 @@ mbi-alias = <0x0 0xfe610000>; mbi-ranges = <424 56>; msi-controller; + ranges; + #address-cells = <2>; #interrupt-cells = <4>; + #size-cells = <2>; + + its0: msi-controller@fe640000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe640000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + + its1: msi-controller@fe660000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe660000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; ppi-partitions { ppi_partition0: interrupt-partition-0 { @@ -1241,6 +1596,22 @@ status = "disabled"; }; + timer0: timer@feae0000 { + compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xfeae0000 0x0 0x20>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; + clock-names = "pclk", "timer"; + }; + + wdt: watchdog@feaf0000 { + compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; + reg = <0x0 0xfeaf0000 0x0 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; + }; + spi0: spi@feb00000 { compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; reg = <0x0 0xfeb00000 0x0 0x1000>; @@ -1572,6 +1943,38 @@ status = "disabled"; }; + tsadc: tsadc@fec00000 { + compatible = "rockchip,rk3588-tsadc"; + reg = <0x0 0xfec00000 0x0 0x400>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru CLK_TSADC>; + assigned-clock-rates = <2000000>; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; + reset-names = "tsadc-apb", "tsadc"; + rockchip,hw-tshut-temp = <120000>; + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-1 = <&tsadc_shut>; + pinctrl-names = "gpio", "otpout"; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + saradc: adc@fec10000 { + compatible = "rockchip,rk3588-saradc"; + reg = <0x0 0xfec10000 0x0 0x10000>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + i2c6: i2c@fec80000 { compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xfec80000 0x0 0x1000>; @@ -1627,6 +2030,60 @@ status = "disabled"; }; + otp: efuse@fecc0000 { + compatible = "rockchip,rk3588-otp"; + reg = <0x0 0xfecc0000 0x0 0x400>; + clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, + <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; + clock-names = "otp", "apb_pclk", "phy", "arb"; + resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, + <&cru SRST_OTPC_ARB>; + reset-names = "otp", "apb", "arb"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_code: cpu-code@2 { + reg = <0x02 0x2>; + }; + + otp_id: id@7 { + reg = <0x07 0x10>; + }; + + cpub0_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + cpub1_leakage: cpu-leakage@18 { + reg = <0x18 0x1>; + }; + + cpul_leakage: cpu-leakage@19 { + reg = <0x19 0x1>; + }; + + log_leakage: log-leakage@1a { + reg = <0x1a 0x1>; + }; + + gpu_leakage: gpu-leakage@1b { + reg = <0x1b 0x1>; + }; + + otp_cpu_version: cpu-version@1c { + reg = <0x1c 0x1>; + bits = <3 3>; + }; + + npu_leakage: npu-leakage@28 { + reg = <0x28 0x1>; + }; + + codec_leakage: codec-leakage@29 { + reg = <0x29 0x1>; + }; + }; + dmac2: dma-controller@fed10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfed10000 0x0 0x4000>; @@ -1638,6 +2095,38 @@ #dma-cells = <1>; }; + combphy0_ps: phy@fee00000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee00000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy0_grf>; + status = "disabled"; + }; + + combphy2_psu: phy@fee20000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee20000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY2>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy2_grf>; + status = "disabled"; + }; + system_sram2: sram@ff001000 { compatible = "mmio-sram"; reg = <0x0 0xff001000 0x0 0xef000>; diff --git a/include/dt-bindings/ata/ahci.h b/include/dt-bindings/ata/ahci.h new file mode 100644 index 0000000000..77997b3561 --- /dev/null +++ b/include/dt-bindings/ata/ahci.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause */ +/* + * This header provides constants for most AHCI bindings. + */ + +#ifndef _DT_BINDINGS_ATA_AHCI_H +#define _DT_BINDINGS_ATA_AHCI_H + +/* Host Bus Adapter generic platform capabilities */ +#define HBA_SSS (1 << 27) +#define HBA_SMPS (1 << 28) + +/* Host Bus Adapter port-specific platform capabilities */ +#define HBA_PORT_HPCP (1 << 18) +#define HBA_PORT_MPSP (1 << 19) +#define HBA_PORT_CPD (1 << 20) +#define HBA_PORT_ESP (1 << 21) +#define HBA_PORT_FBSCP (1 << 22) + +#endif -- 2.25.1

2 7

[PATCH v3 00/10] spi: bcm63xx-hsspi: driver and doc updates
by William Zhang 12 Aug '23

12 Aug '23

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly. Changes in v3: - Add Reviewed-by tags - Reorder the patch series for SPI changes and arch/doc changes - Move arch related Kconfig changes to SPI enabling patch - Separate the Kconfig BCM63XX_HSSPI dependency change to a dedicate patch - Combine multi-line condition into single line for config HAVE_SPI_CS_CTRL Changes in v2: - Add Álvaro Fernández Rojas as another maintainer William Zhang (10): spi: bcm63xx-hsspi: Make driver depend on BCMBCA arch spi: bcm63xx-hsspi: Fix multi-bit mode setting spi: bcm63xx-hsspi: Add new compatible string support spi: bcm63xx-hsspi: Add prepend mode support spi: bcmbca-hsspi: Add driver for newer HSSPI controller dt-bindings: spi: Add bcm63xx-hsspi controller support ARM: dts: broadcom: bcmbca: Add spi controller node arm64: dts: broadcom: bcmbca: Add spi controller node broadcom: bcmbca: Enable SPI drivers by default MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers MAINTAINERS | 9 + arch/arm/Kconfig | 2 + arch/arm/dts/bcm47622.dtsi | 18 + arch/arm/dts/bcm4908.dtsi | 17 + arch/arm/dts/bcm4912.dtsi | 20 + arch/arm/dts/bcm63138.dtsi | 18 + arch/arm/dts/bcm63146.dtsi | 19 + arch/arm/dts/bcm63148.dtsi | 18 + arch/arm/dts/bcm63158.dtsi | 15 +- arch/arm/dts/bcm63178.dtsi | 19 + arch/arm/dts/bcm6756.dtsi | 19 + arch/arm/dts/bcm6813.dtsi | 20 + arch/arm/dts/bcm6846.dtsi | 18 + arch/arm/dts/bcm6855.dtsi | 27 +- arch/arm/dts/bcm6856.dtsi | 23 +- arch/arm/dts/bcm6858.dtsi | 23 +- arch/arm/dts/bcm6878.dtsi | 19 + arch/arm/dts/bcm947622.dts | 4 + arch/arm/dts/bcm94908.dts | 4 + arch/arm/dts/bcm94912.dts | 4 + arch/arm/dts/bcm963138.dts | 4 + arch/arm/dts/bcm963146.dts | 4 + arch/arm/dts/bcm963148.dts | 4 + arch/arm/dts/bcm963158.dts | 4 + arch/arm/dts/bcm963178.dts | 4 + arch/arm/dts/bcm96756.dts | 4 + arch/arm/dts/bcm96813.dts | 4 + arch/arm/dts/bcm96846.dts | 4 + arch/arm/dts/bcm96855.dts | 4 + arch/arm/dts/bcm96856.dts | 4 + arch/arm/dts/bcm96858.dts | 4 + arch/arm/dts/bcm96878.dts | 4 + arch/arm/mach-bcmbca/Kconfig | 23 + .../spi/brcm,bcm63xx-hsspi.yaml | 134 ++++++ drivers/spi/Kconfig | 13 +- drivers/spi/Makefile | 1 + drivers/spi/bcm63xx_hsspi.c | 277 +++++++++++- drivers/spi/bcmbca_hsspi.c | 414 ++++++++++++++++++ 38 files changed, 1157 insertions(+), 69 deletions(-) create mode 100644 doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml create mode 100644 drivers/spi/bcmbca_hsspi.c -- 2.37.3

3 20

[PATCH v3 1/2] schemas: Add firmware node schema
by Simon Glass 12 Aug '23

12 Aug '23

Add a motivation and purpose for this new proposed node. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- (no changes since v1) dtschema/schemas/firmware.yaml | 83 ++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 dtschema/schemas/firmware.yaml diff --git a/dtschema/schemas/firmware.yaml b/dtschema/schemas/firmware.yaml new file mode 100644 index 0000000..4439a70 --- /dev/null +++ b/dtschema/schemas/firmware.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-clause +# Copyright 2023 Google LLC +# + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: /firmware Node + +maintainers: + - Simon Glass <sjg(a)chromium.org> + +description: | + The '/firmware' node does not represent a real device, but serves as a place + for recording information about the main firmware used on the device, such as + a map of its contents. This is used by the Operating System (OS), user space + programs and possibly other firmware components. Data in the '/firmware' node + does not itself represent the hardware. + + Properties in this node should be common to (and used by) at least two + firmware projects, such as U-Boot and TF-A. Project-specific subnodes can be + used for properties which are specific to a single project. + + Purpose of '/firmware' node + --------------------------- + + Firmware has traditionally been fairly opaque to the OS, with the OS taking + no interest in its contents, version, layout or how it might be updated. This + is less than ideal, since firmware is an important part of the system and + visibility into its operation is every bit as important as visbility into the + OS and user-space programs within the system. + + The traditional approach has been to let firmware deal with firmware, and the + OS deal with everything else. Updating firmware has been handled by firmware. + For example, the UEFI spec defines a way for the OS to post a 'capsule' which + is discovered next time the system boots, permitting firmware updates. But + firmware updates in firmware are highly problematic. They require a reboot + and a sometimes-lengthy wait with a strange-looking interface unfamiliar + to most users. It seems better to make the update as transparent as possible + to the user. As an example of that, ChromeOS has full knowledge of the + firmware version and layout, updates it in the background from user space and + instantly selects the new firmware when the user reboots or logs out. + + A common objection to considering the system holistically is that some parts + of the system are inaccessible to the OS, such as a secure enclave. However + this does not preclude providing visibility into what is present in that + enclave. Firmware-version information is still useful. Firmware updates are + still needed and can still be initiated from user space. + + Another objection is that firmware should provide an interface to the OS, + while keeping its structure private. This thinking is largely driven by + extrapolating from how firmware has been handled in the 'BIOS' days. + It should be considered a degenerate case rather than the norm. As complexity + increases, it creates an artificial boundary between two pieces of the whole. + Mechanisms then need to be invented to cross this unnecessary chasm. An + example of this is Intel's Dynamic Platform and Thermal Framework (DPTF), + which consists of user-space, OS and firmware components all working towards + a shared goal. We need a standard description of these cross-system pieces. + + In order to 'teach the OS about firmware', we need a place to put this + information. That is the purpose of this node. + + In an Open Source world the entire model of firmware needs to adjust to be + more open, more visible and managed just like any other part of the system. + The major goal is to standardise how firmware is presented to the OS and user + space, so that common utilities can be used to manage the entire system, + including the firmware. For example, fwupd can look in this node for + information on how to update the firmware, similar to how VBE works. [1] + It is likely that other purposes will come to light over time. + + [1] https://github.com/fwupd/fwupd/tree/main/plugins/vbe + +properties: + $nodename: + const: firmware + + "#address-cells": true + "#size-cells": true + +additionalProperties: + type: object -- 2.41.0.694.ge786442a9b-goog

1 1

CFP open for RISC-V MC at Linux Plumbers Conference 2023
by Atish Patra 11 Aug '23

11 Aug '23

The CFP for topic proposals for the RISC-V micro conference[1] 2023 is open now. Please submit your proposal before it's too late! The Linux plumbers event will be both in person and remote (hybrid)virtual this year. More details can be found here [2]. We will start accepting proposals after 15th August 2023 to avoid last minute visa/travel hassles. The conference registration sells out pretty quickly too. Thus, we would prefer to sort out the schedule sooner than later. The final deadline is 15th October 2023 though. [1] https://lpc.events/event/16/contributions/1148/ [2] https://lpc.events/ -- Regards, Atish

2 3

[PATCH] doc/sphinx/requirements.txt: Bump certifi up
by Tom Rini 11 Aug '23

11 Aug '23

Upgrade certifi to the latest version, to remove e-Tugra from the root store. Link: https://groups.google.com/a/mozilla.org/g/dev-security-policy/c/C-HrP1SEq1A… Signed-off-by: Tom Rini <trini(a)konsulko.com> --- doc/sphinx/requirements.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/sphinx/requirements.txt b/doc/sphinx/requirements.txt index b74661ad3f1c..4f411f78d030 100644 --- a/doc/sphinx/requirements.txt +++ b/doc/sphinx/requirements.txt @@ -1,6 +1,6 @@ alabaster==0.7.12 Babel==2.9.1 -certifi==2023.5.7 +certifi==2023.07.22 charset-normalizer==2.0.12 docutils==0.16 idna==3.3 -- 2.34.1

3 3

[PATCH 00/16] bootstd: Improve ChromiumOS support
by Simon Glass 11 Aug '23

11 Aug '23

The ChromiumOS bootmeth is fairly basic at present. It is able to boot only x86 kernels and contains quite a few hard-coded offsets. This series tidies it up by bringing in some vboot structures and adding support for ARM. It adds a few more features to bootstd, including display of x86 setup information. So far this does not actually boot correctly on any ARM Chromebook: jerry - hangs when booting kernel bob - Bad Linux ARM64 Image magic! with lz4-compressed kernel Further work can address these issues. Simon Glass (16): bootstd: cros: Correct reporting of I/O errors bootstd: cros: Move partition reading into a function bootstd: cros: Bring in some ChromiumOS structures bootstd: cros: Support a kernel on either partition bootstd: cros: Decode some kernel preamble fields bootstd: cros: Simplify setup and cmdline expressions bootstd: Move common zimage functions to bootm.h bootstd: cros: Add docs for the kernel layout bootstd: cros: Add private info for ChromiumOS bootstd: Add private bootmeth data to the bootflow bootstd: cros: Add a function to read info from partition bootstd: cros: Add a function to read a kernel bootstd: cros: Split up reading info and kernel bootstd: Allow display of the x86 setup information bootstd: Add a command to read all files for a bootflow bootstd: cros: Add ARM support arch/x86/include/asm/zimage.h | 37 ---- arch/x86/lib/zimage.c | 8 +- boot/Kconfig | 4 +- boot/bootflow.c | 15 ++ boot/bootm.c | 37 ++++ boot/bootmeth-uclass.c | 10 + boot/bootmeth_cros.c | 363 ++++++++++++++++++++++++++++------ boot/bootmeth_cros.h | 197 ++++++++++++++++++ cmd/bootflow.c | 47 ++++- doc/usage/cmd/bootflow.rst | 139 ++++++++++++- include/bootflow.h | 15 +- include/bootm.h | 47 +++++ include/bootmeth.h | 23 +++ 13 files changed, 836 insertions(+), 106 deletions(-) create mode 100644 boot/bootmeth_cros.h -- 2.41.0.487.g6d72f3e995-goog

3 38

[PATCH v2 15/16] bootstd: Add a command to read all files for a bootflow
by Simon Glass 11 Aug '23

11 Aug '23

Some bootflows (such as EFI and ChromiumOS) delay reading the kernel until it is needed to boot. This saves time when scanning and avoids needing to allocate memory for something that may never be used. To permit reading of these files, add a new 'bootflow read' command. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: - Make the bootmeth operation optional to remove code-size impact boot/bootflow.c | 16 ++++++++ boot/bootmeth-uclass.c | 12 ++++++ boot/bootmeth_cros.c | 22 ++++++++++- cmd/bootflow.c | 33 +++++++++++++++- doc/usage/cmd/bootflow.rst | 80 +++++++++++++++++++++++++++++++++++++- include/bootflow.h | 11 ++++++ include/bootmeth.h | 25 +++++++++++- 7 files changed, 195 insertions(+), 4 deletions(-) diff --git a/boot/bootflow.c b/boot/bootflow.c index daf862fac788..6ef62e1d1896 100644 --- a/boot/bootflow.c +++ b/boot/bootflow.c @@ -445,6 +445,22 @@ void bootflow_remove(struct bootflow *bflow) free(bflow); } +#if CONFIG_IS_ENABLED(BOOTSTD_FULL) +int bootflow_read_all(struct bootflow *bflow) +{ + int ret; + + if (bflow->state != BOOTFLOWST_READY) + return log_msg_ret("rd", -EPROTO); + + ret = bootmeth_read_all(bflow->method, bflow); + if (ret) + return log_msg_ret("rd2", ret); + + return 0; +} +#endif /* BOOTSTD_FULL */ + int bootflow_boot(struct bootflow *bflow) { int ret; diff --git a/boot/bootmeth-uclass.c b/boot/bootmeth-uclass.c index 175eb1de5e1e..1d157d54dbdd 100644 --- a/boot/bootmeth-uclass.c +++ b/boot/bootmeth-uclass.c @@ -61,6 +61,18 @@ int bootmeth_set_bootflow(struct udevice *dev, struct bootflow *bflow, return ops->set_bootflow(dev, bflow, buf, size); } +#if CONFIG_IS_ENABLED(BOOTSTD_FULL) +int bootmeth_read_all(struct udevice *dev, struct bootflow *bflow) +{ + const struct bootmeth_ops *ops = bootmeth_get_ops(dev); + + if (!ops->read_all) + return -ENOSYS; + + return ops->read_all(dev, bflow); +} +#endif /* BOOTSTD_FULL */ + int bootmeth_boot(struct udevice *dev, struct bootflow *bflow) { const struct bootmeth_ops *ops = bootmeth_get_ops(dev); diff --git a/boot/bootmeth_cros.c b/boot/bootmeth_cros.c index 06709dd9171c..6c28feb34fe0 100644 --- a/boot/bootmeth_cros.c +++ b/boot/bootmeth_cros.c @@ -395,13 +395,30 @@ static int cros_read_file(struct udevice *dev, struct bootflow *bflow, return -ENOSYS; } -static int cros_boot(struct udevice *dev, struct bootflow *bflow) +#if CONFIG_IS_ENABLED(BOOSTD_FULL) +static int cros_read_all(struct udevice *dev, struct bootflow *bflow) { int ret; + if (bflow->buf) + return log_msg_ret("ld", -EALREADY); ret = cros_read_kernel(bflow); if (ret) return log_msg_ret("rd", ret); + + return 0; +} +#endif /* BOOSTD_FULL */ + +static int cros_boot(struct udevice *dev, struct bootflow *bflow) +{ + int ret; + + if (!bflow->buf) { + ret = cros_read_kernel(bflow); + if (ret) + return log_msg_ret("rd", ret); + } #ifdef CONFIG_X86 zboot_start(map_to_sysmem(bflow->buf), bflow->size, 0, 0, map_to_sysmem(bflow->x86_setup), @@ -425,6 +442,9 @@ static struct bootmeth_ops cros_bootmeth_ops = { .read_bootflow = cros_read_bootflow, .read_file = cros_read_file, .boot = cros_boot, +#if CONFIG_IS_ENABLED(BOOSTD_FULL) + .read_all = cros_read_all, +#endif /* BOOSTD_FULL */ }; static const struct udevice_id cros_bootmeth_ids[] = { diff --git a/cmd/bootflow.c b/cmd/bootflow.c index 9562832ce438..3c3abaf8a3b2 100644 --- a/cmd/bootflow.c +++ b/cmd/bootflow.c @@ -379,6 +379,35 @@ static int do_bootflow_info(struct cmd_tbl *cmdtp, int flag, int argc, return 0; } +static int do_bootflow_read(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + struct bootstd_priv *std; + struct bootflow *bflow; + int ret; + + ret = bootstd_get_priv(&std); + if (ret) + return CMD_RET_FAILURE; + + /* + * Require a current bootflow. Users can use 'bootflow scan -b' to + * automatically scan and boot, if needed. + */ + if (!std->cur_bootflow) { + printf("No bootflow selected\n"); + return CMD_RET_FAILURE; + } + bflow = std->cur_bootflow; + ret = bootflow_read_all(bflow); + if (ret) { + printf("Failed: err=%dE\n", ret); + return CMD_RET_FAILURE; + } + + return 0; +} + static int do_bootflow_boot(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -519,7 +548,8 @@ static char bootflow_help_text[] = "bootflow list [-e] - list scanned bootflows (-e errors)\n" "bootflow select [<num>|<name>] - select a bootflow\n" "bootflow info [-ds] - show info on current bootflow (-d dump bootflow)\n" - "bootflow boot - boot current bootflow (or first available if none selected)\n" + "bootflow read - read all current-bootflow files\n" + "bootflow boot - boot current bootflow\n" "bootflow menu [-t] - show a menu of available bootflows\n" "bootflow cmdline [set|get|clear|delete|auto] <param> [<value>] - update cmdline"; #else @@ -533,6 +563,7 @@ U_BOOT_CMD_WITH_SUBCMDS(bootflow, "Boot flows", bootflow_help_text, U_BOOT_SUBCMD_MKENT(list, 2, 1, do_bootflow_list), U_BOOT_SUBCMD_MKENT(select, 2, 1, do_bootflow_select), U_BOOT_SUBCMD_MKENT(info, 2, 1, do_bootflow_info), + U_BOOT_SUBCMD_MKENT(read, 1, 1, do_bootflow_read), U_BOOT_SUBCMD_MKENT(boot, 1, 1, do_bootflow_boot), U_BOOT_SUBCMD_MKENT(menu, 2, 1, do_bootflow_menu), U_BOOT_SUBCMD_MKENT(cmdline, 4, 1, do_bootflow_cmdline), diff --git a/doc/usage/cmd/bootflow.rst b/doc/usage/cmd/bootflow.rst index d53f8373eff0..ead493d0aaf8 100644 --- a/doc/usage/cmd/bootflow.rst +++ b/doc/usage/cmd/bootflow.rst @@ -12,6 +12,7 @@ Synopis bootflow list [-e] bootflow select [<num|name>] bootflow info [-ds] + bootflow read bootflow boot bootflow cmdline [set|get|clear|delete|auto] <param> [<value>] @@ -194,10 +195,26 @@ Use the `-d` flag to dump out the contents of the bootfile file. The `-s` flag shows any x86 setup block, instead of the above. +bootflow read +~~~~~~~~~~~~~ + +This reads any files related to the bootflow. Some bootflows with large files +avoid doing this when the bootflow is scanned, since it uses a lot of memory +and takes extra time. The files are then automatically read when `bootflow boot` +is used. + +This command reads these files immediately. Typically this fills in the bootflow +`buf` property, which can be used to examine the bootflow. + +Note that reading the files does not result in any extra parsing, nor loading of +images in the files. This is purely used to read in the data ready for +booting, or examination. + + bootflow boot ~~~~~~~~~~~~~ -This boots the current bootflow. +This boots the current bootflow, reading any required files first. bootflow cmdline @@ -580,6 +597,67 @@ This shows looking at x86 setup information:: Init size : 1383000 Handover offset : 0 +This shows reading a bootflow to examine the kernel:: + + => bootfl i 0 + Name: + Device: emmc(a)1c,0.bootdev + Block dev: emmc(a)1c,0.blk + Method: cros + State: ready + Partition: 2 + Subdir: (none) + Filename: <NULL> + Buffer: 0 + Size: 63ee00 (6548992 bytes) + OS: ChromeOS + Cmdline: console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=PARTUUID=35c775e7-3735-d745-93e5-d9e0238f7ed0/PARTNROFF=1 rootwait rw dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none rw 1,0 3788800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=3788800 alg=sha1 root_hexdigest=55052b629d3ac889f25a9583ea12cdcd3ea15ff8 salt=a2d4d9e574069f4fed5e3961b99054b7a4905414b60a25d89974a7334021165c" noinitrd vt.global_cursor_default=0 kern_guid=35c775e7-3735-d745-93e5-d9e0238f7ed0 add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic disablevmx=off + X86 setup: 77b56010 + Logo: (none) + FDT: <NULL> + Error: 0 + +Note that `Buffer` is 0 so it has not be read yet. Using `bootflow read`:: + + => bootfl read + => bootfl info + Name: + Device: emmc(a)1c,0.bootdev + Block dev: emmc(a)1c,0.blk + Method: cros + State: ready + Partition: 2 + Subdir: (none) + Filename: <NULL> + Buffer: 77b7e400 + Size: 63ee00 (6548992 bytes) + OS: ChromeOS + Cmdline: console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=PARTUUID=35c775e7-3735-d745-93e5-d9e0238f7ed0/PARTNROFF=1 rootwait rw dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none rw 1,0 3788800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=3788800 alg=sha1 root_hexdigest=55052b629d3ac889f25a9583ea12cdcd3ea15ff8 salt=a2d4d9e574069f4fed5e3961b99054b7a4905414b60a25d89974a7334021165c" noinitrd vt.global_cursor_default=0 kern_guid=35c775e7-3735-d745-93e5-d9e0238f7ed0 add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic disablevmx=off + X86 setup: 781b4400 + Logo: (none) + FDT: <NULL> + Error: 0 + +Now the buffer can be accessed:: + + => md 77b7e400 + 77b7e400: 1186f6fc 40000002 b8fa0c75 00000018 .......@u....... + 77b7e410: c08ed88e a68dd08e 000001e8 000000e8 ................ + 77b7e420: ed815d00 00000021 62c280b8 89e80100 .]..!......b.... + 77b7e430: 22f7e8c4 c0850061 22ec850f eb890061 ..."a......"a... + 77b7e440: 0230868b 01480000 21d0f7c3 00fb81c3 ..0...H....!.... + 77b7e450: 7d010000 0000bb05 c3810100 00d4f000 ...}............ + 77b7e460: 8130858d 85890061 00618132 3095010f ..0.a...2.a....0 + 77b7e470: 0f006181 c883e020 e0220f20 e000bb8d .a.. ... ."..... + 77b7e480: c0310062 001800b9 8dabf300 62e000bb b.1............b + 77b7e490: 07878d00 89000010 00bb8d07 8d0062f0 .............b.. + 77b7e4a0: 00100787 0004b900 07890000 00100005 ................ + 77b7e4b0: 08c78300 8df37549 630000bb 0183b800 ....Iu.....c.... + 77b7e4c0: 00b90000 89000008 00000507 c7830020 ............ ... + 77b7e4d0: f3754908 e000838d 220f0062 0080b9d8 .Iu.....b..".... + 77b7e4e0: 320fc000 08e8ba0f c031300f b8d0000f ...2.....01..... + 77b7e4f0: 00000020 6ad8000f 00858d10 50000002 ......j.......P + Return value ------------ diff --git a/include/bootflow.h b/include/bootflow.h index fdcfeddc1a63..44d3741eacae 100644 --- a/include/bootflow.h +++ b/include/bootflow.h @@ -352,6 +352,17 @@ void bootflow_free(struct bootflow *bflow); */ int bootflow_boot(struct bootflow *bflow); +/** + * bootflow_read_all() - Read all bootflow files + * + * Some bootmeths delay reading of large files until booting is requested. This + * causes those files to be read. + * + * @bflow: Bootflow to read + * Return: result of trying to read + */ +int bootflow_read_all(struct bootflow *bflow); + /** * bootflow_run_boot() - Try to boot a bootflow * diff --git a/include/bootmeth.h b/include/bootmeth.h index 7cb7da33deaa..d3d8d608cd78 100644 --- a/include/bootmeth.h +++ b/include/bootmeth.h @@ -119,7 +119,16 @@ struct bootmeth_ops { */ int (*read_file)(struct udevice *dev, struct bootflow *bflow, const char *file_path, ulong addr, ulong *sizep); - +#if CONFIG_IS_ENABLED(BOOTSTD_FULL) + /** + * readall() - read all files for a bootflow + * + * @dev: Bootmethod device to boot + * @bflow: Bootflow to read + * Return: 0 if OK, -EIO on I/O error, other -ve on other error + */ + int (*read_all)(struct udevice *dev, struct bootflow *bflow); +#endif /* BOOTSTD_FULL */ /** * boot() - boot a bootflow * @@ -223,6 +232,20 @@ int bootmeth_set_bootflow(struct udevice *dev, struct bootflow *bflow, int bootmeth_read_file(struct udevice *dev, struct bootflow *bflow, const char *file_path, ulong addr, ulong *sizep); +/** + * bootmeth_read_all() - read all bootflow files + * + * Some bootmeths delay reading of large files until booting is requested. This + * causes those files to be read. + * + * @dev: Bootmethod device to use + * @bflow: Bootflow to read + * Return: does not return on success, since it should boot the + * Operating Systemn. Returns -EFAULT if that fails, other -ve on + * other error + */ +int bootmeth_read_all(struct udevice *dev, struct bootflow *bflow); + /** * bootmeth_boot() - boot a bootflow * -- 2.41.0.640.ga95def55d0-goog

1 1

[PATCH v3 00/23] CONFIG_IS_ENABLED vs IS_ENABLED
by Troy Kisky 11 Aug '23

11 Aug '23

This patch set gets ready to checks the usage of CONFIG_IS_ENABLED/IS_ENABLED. After the set has been applied, you can delete test/usage_of_is_enabled_todo.txt and run test/usage_of_is_enabled_commit.sh The script test/usage_of_is_enabled_check.sh checks for new questionable uses of CONFIG_IS_ENABLED/IS_ENABLED and is added to .azure-pipelines.yml, and .gitlab-ci.yml version 3 changes: Dropped changes to puma-rk3399 and ringneck-px30 in favor of Quentin Schulz's patch https://patchwork.ozlabs.org/project/uboot/patch/20230301-tsd-env-nowhere-k… https://patchwork.ozlabs.org/project/uboot/patch/20230301-tsd-env-nowhere-k… Please apply them before this series. Drop gateworks: venice: Always define setup_fec and setup_eqos Drop arm: cpu: armv7: ls102xa: fdt: remove eth_device support Simon's patches took care of these Add to todo list, these new questionable uses that snuck into the code. PARTITION_TYPE_GUID PHY_ATHEROS RTC_SANDBOX Changes in v3: remove error entirely and prevent with Kconfig new patch to address Tom's concerns - Rebase on Simon's s/CMD_SATA/SATA/ change - commit message updated Changes in v2: - new patch - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - include linux/kconfig.h from tools/Makefile - as suggested by Simon - changed condition of when to include field bdf - added protection to another instance of bdf in uart.c - Thanks to Simon for getting this corrected - use normal if, not preprocessor - new in series - use an accessor function gd_set_pci_ram_top Troy Kisky (23): kconfig: add IS_ENABLED_NOCHECK to bypass usage_of_is_enabled_check cmd: nvedit: remove error check, handle with Kconfig lib: crc32: prepare for CONFIG_IS_ENABLED changes lib: md5: prepare for CONFIG_IS_ENABLED changes lib: sha1: prepare for CONFIG_IS_ENABLED changes lib: sha256: prepare for CONFIG_IS_ENABLED changes lib: sha512: prepare for CONFIG_IS_ENABLED changes watchdog: add and use Kconfig HAS_WATCHDOG_RUNNING tools: prevent CONFIG_IS_ENABLED errors by including linux/kconfig.h tools: Makefile: prepare for CONFIG_IS_ENABLED changes by adding CONFIG_TOOLS_xxx x86: cpu: qemu: qemu: remove SPL use with CONFIG_IS_ENABLED config_distro_bootcmd: remove booting environment variables from SPL environment ofnode: fdt_support definitions needed if OF_CONTROL is enabled fdt_support: always define fdt_fixup_mtdparts m53menlo: define ft_board_setup only if CONFIG_IS_ENABLED(OF_LIBFDT) freescale: common: pfuze: define pfuze_mode_init only if defined(CONFIG_DM_PMIC) ns16550: match when to define bdf with uart code solidrun: mx6cuboxi: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA wandboard: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA arm: mach-imx: use CONFIG_$(SPL_)SATA instead of CONFIG_SATA x86: cpu: i386: cpu: only set pci_ram_top if CONFIG_IS_ENABLED(PCI) power: pmic: add dm style definitions if not CONFIG_IS_ENABLED(POWER_LEGACY) CI: add test/usage_of_is_enabled_check.sh .azure-pipelines.yml | 11 ++ .gitlab-ci.yml | 5 + arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-omap2/boot-common.c | 5 +- arch/m68k/lib/time.c | 7 +- arch/powerpc/lib/interrupts.c | 5 +- arch/powerpc/lib/ticks.S | 2 +- arch/x86/cpu/apollolake/uart.c | 4 + arch/x86/cpu/i386/cpu.c | 2 +- arch/x86/cpu/qemu/qemu.c | 2 +- board/astro/mcf5373l/fpga.c | 10 +- board/freescale/common/pfuze.c | 2 +- board/menlo/m53menlo/m53menlo.c | 2 + board/solidrun/mx6cuboxi/mx6cuboxi.c | 5 +- board/wandboard/wandboard.c | 5 +- boot/image-board.c | 2 +- cmd/nvedit.c | 32 +--- cmd/ximg.c | 10 +- common/board_f.c | 4 +- common/spl/Kconfig | 4 + drivers/crypto/aspeed/aspeed_hace.c | 2 +- drivers/crypto/hash/hash_sw.c | 2 +- drivers/timer/mpc83xx_timer.c | 5 +- drivers/watchdog/Kconfig | 3 + env/Kconfig | 17 ++- fs/cramfs/uncompress.c | 9 +- include/asm-generic/global_data.h | 6 + include/config_distro_bootcmd.h | 23 +++ include/fdt_support.h | 26 ++-- include/linux/kconfig.h | 5 + include/ns16550.h | 2 +- include/power/pmic.h | 2 +- include/watchdog.h | 7 +- lib/bzip2/bzlib.c | 5 +- lib/bzip2/bzlib_decompress.c | 20 +-- lib/crc32.c | 11 +- lib/md5.c | 7 +- lib/sha1.c | 7 +- lib/sha256.c | 7 +- lib/sha512.c | 11 +- test/usage_of_is_enabled_check.sh | 19 +++ test/usage_of_is_enabled_commit.sh | 12 ++ test/usage_of_is_enabled_correct.sh | 50 +++++++ test/usage_of_is_enabled_exempt.txt | 9 ++ test/usage_of_is_enabled_list.sh | 86 +++++++++++ test/usage_of_is_enabled_splcfg.txt | 21 +++ test/usage_of_is_enabled_todo.txt | 213 +++++++++++++++++++++++++++ tools/Makefile | 3 + 48 files changed, 584 insertions(+), 127 deletions(-) create mode 100755 test/usage_of_is_enabled_check.sh create mode 100755 test/usage_of_is_enabled_commit.sh create mode 100755 test/usage_of_is_enabled_correct.sh create mode 100644 test/usage_of_is_enabled_exempt.txt create mode 100755 test/usage_of_is_enabled_list.sh create mode 100644 test/usage_of_is_enabled_splcfg.txt create mode 100644 test/usage_of_is_enabled_todo.txt -- 2.34.1

4 43