July 2023 - U-Boot

[PATCH v2 1/2] arm64: dts: rockchip: Sync DT from linux-next
by Jagan Teki 12 Aug '23

12 Aug '23

Sync the linux-next from below commit, commit <1642bf66e270> ("arm64: dts: rockchip: add USB2 to rk3588s-rock5a") Also rops the duplicate usb nodes from rk3588s-u-boot.dtsi Signed-off-by: Jagan Teki <jagan(a)edgeble.ai> --- Changes for v2: - Keep sdhci modes for ROCK5B arch/arm/dts/rk3588-edgeble-neu6a.dtsi | 1 - arch/arm/dts/rk3588-edgeble-neu6b-io.dts | 66 +++ arch/arm/dts/rk3588-edgeble-neu6b.dtsi | 359 ++++++++++- arch/arm/dts/rk3588-evb1-v10.dts | 720 ++++++++++++++++++++++- arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 7 - arch/arm/dts/rk3588-rock-5b.dts | 578 +++++++++++++++++- arch/arm/dts/rk3588.dtsi | 112 ++++ arch/arm/dts/rk3588s-u-boot.dtsi | 119 ---- arch/arm/dts/rk3588s.dtsi | 499 +++++++++++++++- include/dt-bindings/ata/ahci.h | 20 + 10 files changed, 2346 insertions(+), 135 deletions(-) create mode 100644 include/dt-bindings/ata/ahci.h diff --git a/arch/arm/dts/rk3588-edgeble-neu6a.dtsi b/arch/arm/dts/rk3588-edgeble-neu6a.dtsi index 38e1a1e25f..727580aaa1 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6a.dtsi +++ b/arch/arm/dts/rk3588-edgeble-neu6a.dtsi @@ -25,7 +25,6 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b-io.dts b/arch/arm/dts/rk3588-edgeble-neu6b-io.dts index e9d5a8bab5..9933765e40 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6b-io.dts +++ b/arch/arm/dts/rk3588-edgeble-neu6b-io.dts @@ -21,7 +21,73 @@ }; }; +&combphy0_ps { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/* FAN */ +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +/* RS232 */ +&uart6 { + pinctrl-0 = <&uart6m0_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* RS485 */ +&uart7 { + pinctrl-0 = <&uart7m2_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b.dtsi b/arch/arm/dts/rk3588-edgeble-neu6b.dtsi index 1c5bcf1280..017559bba3 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6b.dtsi +++ b/arch/arm/dts/rk3588-edgeble-neu6b.dtsi @@ -18,6 +18,42 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; }; &sdhci { @@ -25,8 +61,329 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-init-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/rk3588-evb1-v10.dts b/arch/arm/dts/rk3588-evb1-v10.dts index b91af0204d..229a9111f5 100644 --- a/arch/arm/dts/rk3588-evb1-v10.dts +++ b/arch/arm/dts/rk3588-evb1-v10.dts @@ -38,6 +38,20 @@ regulator-max-microvolt = <12000000>; }; + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_usb>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -47,6 +61,62 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin>; }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; }; &gmac0 { @@ -106,6 +176,12 @@ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -117,13 +193,655 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <2>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_codec_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_codec_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s3: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_1v8_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_0v75_hdmi_edp_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_hdmi_edp_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + pmic@1 { + compatible = "rockchip,rk806"; + reg = <0x01>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, + <&rk806_slave_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_slave_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_slave_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_slave_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_cpu_big1_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big0_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big1_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + + vdd_cpu_big0_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big0_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_cam_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd1v8_ddr_pll_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd1v8_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_1v8_pll_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_1v8_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v8_cam_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_2v8_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_pll_s0: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v85_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_cam_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_cam_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi index 1cd8a57a6f..bfa560ca5f 100644 --- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi +++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi @@ -99,11 +99,6 @@ bootph-all; }; -&sdmmc { - bus-width = <4>; - status = "okay"; -}; - &sdmmc_bus4 { bootph-all; }; @@ -124,8 +119,6 @@ cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_data_strobe &emmc_rstnout>; }; &sfc { diff --git a/arch/arm/dts/rk3588-rock-5b.dts b/arch/arm/dts/rk3588-rock-5b.dts index 95805cb0ad..49d5eb8862 100644 --- a/arch/arm/dts/rk3588-rock-5b.dts +++ b/arch/arm/dts/rk3588-rock-5b.dts @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "rk3588.dtsi" / { @@ -17,6 +18,45 @@ stdout-path = "serial2:1500000n8"; }; + analog-sound { + compatible = "audio-graph-card"; + label = "rk3588-es8316"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + vin-supply = <&vcc5v0_sys>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -25,6 +65,171 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; }; &sdhci { @@ -32,13 +237,384 @@ no-sdio; no-sd; non-removable; - max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; +&sdmmc { + max-frequency = <200000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB hub, which is powered by vcc5v0_sys */ + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588.dtsi b/arch/arm/dts/rk3588.dtsi index d085e57fbc..6be9bf81c0 100644 --- a/arch/arm/dts/rk3588.dtsi +++ b/arch/arm/dts/rk3588.dtsi @@ -7,6 +7,79 @@ #include "rk3588-pinctrl.dtsi" / { + pipe_phy1_grf: syscon@fd5c0000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c0000 0x0 0x100>; + }; + + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gmac0: ethernet@fe1b0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1b0000 0x0 0x10000>; @@ -55,4 +128,43 @@ queue1 {}; }; }; + + sata1: sata@fe220000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe220000 0 0x1000>; + interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>, + <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>, + <&cru CLK_PIPEPHY1_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy1_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + combphy1_ps: phy@fee10000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee10000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY1>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy1_grf>; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi index c703e41802..f8c10227b0 100644 --- a/arch/arm/dts/rk3588s-u-boot.dtsi +++ b/arch/arm/dts/rk3588s-u-boot.dtsi @@ -13,103 +13,12 @@ status = "okay"; }; - usb_host0_ehci: usb@fc800000 { - compatible = "generic-ehci"; - reg = <0x0 0xfc800000 0x0 0x40000>; - interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host0_ohci: usb@fc840000 { - compatible = "generic-ohci"; - reg = <0x0 0xfc840000 0x0 0x40000>; - interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host1_ehci: usb@fc880000 { - compatible = "generic-ehci"; - reg = <0x0 0xfc880000 0x0 0x40000>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - - usb_host1_ohci: usb@fc8c0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfc8c0000 0x0 0x40000>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>; - clock-names = "usbhost", "arbiter"; - power-domains = <&power RK3588_PD_USB>; - status = "disabled"; - }; - pmu1_grf: syscon@fd58a000 { bootph-all; compatible = "rockchip,rk3588-pmu1-grf", "syscon"; reg = <0x0 0xfd58a000 0x0 0x2000>; }; - pipe_phy0_grf: syscon@fd5bc000 { - compatible = "rockchip,pipe-phy-grf", "syscon"; - reg = <0x0 0xfd5bc000 0x0 0x100>; - }; - - usb2phy2_grf: syscon@fd5d8000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", - "simple-mfd"; - reg = <0x0 0xfd5d8000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy2: usb2-phy@8000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0x8000 0x10>; - interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - status = "disabled"; - - u2phy2_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usb2phy3_grf: syscon@fd5dc000 { - compatible = "rockchip,rk3588-usb2phy-grf", "syscon", - "simple-mfd"; - reg = <0x0 0xfd5dc000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - - u2phy3: usb2-phy@c000 { - compatible = "rockchip,rk3588-usb2phy"; - reg = <0xc000 0x10>; - interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - status = "disabled"; - - u2phy3_host: host-port { - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - pcie2x1l2: pcie@fe190000 { compatible = "rockchip,rk3588-pcie", "snps,dw-pcie"; #address-cells = <3>; @@ -174,39 +83,11 @@ status = "disabled"; }; - otp: nvmem@fecc0000 { - compatible = "rockchip,rk3588-otp"; - reg = <0x0 0xfecc0000 0x0 0x400>; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - - cpu_id: id@7 { - reg = <0x07 0x10>; - }; - }; - rng: rng@fe378000 { compatible = "rockchip,trngv1"; reg = <0x0 0xfe378000 0x0 0x200>; status = "disabled"; }; - - combphy0_ps: phy@fee00000 { - compatible = "rockchip,rk3588-naneng-combphy"; - reg = <0x0 0xfee00000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, - <&cru PCLK_PHP_ROOT>; - clock-names = "refclk", "apbclk", "phpclk"; - assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; - assigned-clock-rates = <100000000>; - resets = <&cru SRST_P_PCIE2_PHY0>, <&cru SRST_REF_PIPE_PHY0>; - reset-names = "combphy-apb", "combphy"; - rockchip,pipe-grf = <&php_grf>; - rockchip,pipe-phy-grf = <&pipe_phy0_grf>; - status = "disabled"; - }; }; &xin24m { diff --git a/arch/arm/dts/rk3588s.dtsi b/arch/arm/dts/rk3588s.dtsi index fca8503aed..c9f9dd2472 100644 --- a/arch/arm/dts/rk3588s.dtsi +++ b/arch/arm/dts/rk3588s.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/power/rk3588-power.h> #include <dt-bindings/reset/rockchip,rk3588-cru.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/ata/ahci.h> / { compatible = "rockchip,rk3588"; @@ -60,6 +62,8 @@ enable-method = "psci"; capacity-dmips-mhz = <530>; clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <32768>; i-cache-line-size = <64>; @@ -136,6 +140,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -174,6 +180,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -222,6 +230,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -230,6 +240,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -238,6 +250,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -246,6 +260,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -254,6 +270,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -262,6 +280,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -270,6 +290,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -278,6 +300,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -286,6 +310,8 @@ cache-size = <3145728>; cache-line-size = <64>; cache-sets = <4096>; + cache-level = <3>; + cache-unified; }; }; @@ -304,10 +330,6 @@ scmi_clk: protocol@14 { reg = <0x14>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>, - <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clock-rates = <1200000000>, - <1200000000>; #clock-cells = <1>; }; @@ -377,6 +399,50 @@ }; }; + usb_host0_ehci: usb@fc800000 { + compatible = "rockchip,rk3588-ehci", "generic-ehci"; + reg = <0x0 0xfc800000 0x0 0x40000>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; + phys = <&u2phy2_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host0_ohci: usb@fc840000 { + compatible = "rockchip,rk3588-ohci", "generic-ohci"; + reg = <0x0 0xfc840000 0x0 0x40000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>; + phys = <&u2phy2_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host1_ehci: usb@fc880000 { + compatible = "rockchip,rk3588-ehci", "generic-ehci"; + reg = <0x0 0xfc880000 0x0 0x40000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; + phys = <&u2phy3_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + + usb_host1_ohci: usb@fc8c0000 { + compatible = "rockchip,rk3588-ohci", "generic-ohci"; + reg = <0x0 0xfc8c0000 0x0 0x40000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>; + phys = <&u2phy3_host>; + phy-names = "usb"; + power-domains = <&power RK3588_PD_USB>; + status = "disabled"; + }; + sys_grf: syscon@fd58c000 { compatible = "rockchip,rk3588-sys-grf", "syscon"; reg = <0x0 0xfd58c000 0x0 0x1000>; @@ -387,6 +453,66 @@ reg = <0x0 0xfd5b0000 0x0 0x1000>; }; + pipe_phy0_grf: syscon@fd5bc000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5bc000 0x0 0x100>; + }; + + pipe_phy2_grf: syscon@fd5c4000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c4000 0x0 0x100>; + }; + + usb2phy2_grf: syscon@fd5d8000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5d8000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy2: usb2-phy@8000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x8000 0x10>; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; + reset-names = "phy", "apb"; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy2"; + #clock-cells = <0>; + status = "disabled"; + + u2phy2_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb2phy3_grf: syscon@fd5dc000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfd5dc000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy3: usb2-phy@c000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0xc000 0x10>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>; + reset-names = "phy", "apb"; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy3"; + #clock-cells = <0>; + status = "disabled"; + + u2phy3_host: host-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + ioc: syscon@fd5f0000 { compatible = "rockchip,rk3588-ioc", "syscon"; reg = <0x0 0xfd5f0000 0x0 0x10000>; @@ -414,7 +540,7 @@ <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, <&cru CLK_GPU>; assigned-clock-rates = - <100000000>, <786432000>, + <1100000000>, <786432000>, <850000000>, <1188000000>, <702000000>, <400000000>, <500000000>, @@ -810,6 +936,57 @@ }; }; + i2s4_8ch: i2s@fddc0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc0000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 0>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S4_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s5_8ch: i2s@fddf0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf0000 0x0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 2>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S5_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s9_8ch: i2s@fddfc000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddfc000 0x0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 23>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S9_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + qos_gpu_m0: qos@fdf35000 { compatible = "rockchip,rk3588-qos", "syscon"; reg = <0x0 0xfdf35000 0x0 0x20>; @@ -1099,6 +1276,52 @@ }; }; + sata0: sata@fe210000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe210000 0 0x1000>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, + <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, + <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy0_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + sata2: sata@fe230000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe230000 0 0x1000>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>, + <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>, + <&cru CLK_PIPEPHY2_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy2_psu PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + sdmmc: mmc@fe2c0000 { compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe2c0000 0x0 0x4000>; @@ -1114,6 +1337,21 @@ status = "disabled"; }; + sdio: mmc@fe2d0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x00 0xfe2d0000 0x00 0x4000>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>; + power-domains = <&power RK3588_PD_SDIO>; + status = "disabled"; + }; + sdhci: mmc@fe2e0000 { compatible = "rockchip,rk3588-dwcmshc"; reg = <0x0 0xfe2e0000 0x0 0x10000>; @@ -1125,6 +1363,9 @@ <&cru TMCLK_EMMC>; clock-names = "core", "bus", "axi", "block", "timer"; max-frequency = <200000000>; + pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>, + <&emmc_cmd>, <&emmc_data_strobe>; + pinctrl-names = "default"; resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>, <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, <&cru SRST_T_EMMC>; @@ -1132,6 +1373,103 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe470000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe470000 0x0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdi1 + &i2s0_sdi2 + &i2s0_sdi3 + &i2s0_sdo0 + &i2s0_sdo1 + &i2s0_sdo2 + &i2s0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe480000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe480000 0x0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_lrck + &i2s1m0_sclk + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@fe490000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe490000 0x0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 0>, <&dmac1 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m1_lrck + &i2s2m1_sclk + &i2s2m1_sdi + &i2s2m1_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3_2ch: i2s@fe4a0000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe4a0000 0x0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 2>, <&dmac1 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s3_lrck + &i2s3_sclk + &i2s3_sdi + &i2s3_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe600000 { compatible = "arm,gic-v3"; reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ @@ -1141,7 +1479,24 @@ mbi-alias = <0x0 0xfe610000>; mbi-ranges = <424 56>; msi-controller; + ranges; + #address-cells = <2>; #interrupt-cells = <4>; + #size-cells = <2>; + + its0: msi-controller@fe640000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe640000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + + its1: msi-controller@fe660000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe660000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; ppi-partitions { ppi_partition0: interrupt-partition-0 { @@ -1241,6 +1596,22 @@ status = "disabled"; }; + timer0: timer@feae0000 { + compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xfeae0000 0x0 0x20>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; + clock-names = "pclk", "timer"; + }; + + wdt: watchdog@feaf0000 { + compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; + reg = <0x0 0xfeaf0000 0x0 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; + }; + spi0: spi@feb00000 { compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; reg = <0x0 0xfeb00000 0x0 0x1000>; @@ -1572,6 +1943,38 @@ status = "disabled"; }; + tsadc: tsadc@fec00000 { + compatible = "rockchip,rk3588-tsadc"; + reg = <0x0 0xfec00000 0x0 0x400>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru CLK_TSADC>; + assigned-clock-rates = <2000000>; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; + reset-names = "tsadc-apb", "tsadc"; + rockchip,hw-tshut-temp = <120000>; + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-1 = <&tsadc_shut>; + pinctrl-names = "gpio", "otpout"; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + saradc: adc@fec10000 { + compatible = "rockchip,rk3588-saradc"; + reg = <0x0 0xfec10000 0x0 0x10000>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + i2c6: i2c@fec80000 { compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xfec80000 0x0 0x1000>; @@ -1627,6 +2030,60 @@ status = "disabled"; }; + otp: efuse@fecc0000 { + compatible = "rockchip,rk3588-otp"; + reg = <0x0 0xfecc0000 0x0 0x400>; + clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, + <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; + clock-names = "otp", "apb_pclk", "phy", "arb"; + resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, + <&cru SRST_OTPC_ARB>; + reset-names = "otp", "apb", "arb"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_code: cpu-code@2 { + reg = <0x02 0x2>; + }; + + otp_id: id@7 { + reg = <0x07 0x10>; + }; + + cpub0_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + cpub1_leakage: cpu-leakage@18 { + reg = <0x18 0x1>; + }; + + cpul_leakage: cpu-leakage@19 { + reg = <0x19 0x1>; + }; + + log_leakage: log-leakage@1a { + reg = <0x1a 0x1>; + }; + + gpu_leakage: gpu-leakage@1b { + reg = <0x1b 0x1>; + }; + + otp_cpu_version: cpu-version@1c { + reg = <0x1c 0x1>; + bits = <3 3>; + }; + + npu_leakage: npu-leakage@28 { + reg = <0x28 0x1>; + }; + + codec_leakage: codec-leakage@29 { + reg = <0x29 0x1>; + }; + }; + dmac2: dma-controller@fed10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfed10000 0x0 0x4000>; @@ -1638,6 +2095,38 @@ #dma-cells = <1>; }; + combphy0_ps: phy@fee00000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee00000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy0_grf>; + status = "disabled"; + }; + + combphy2_psu: phy@fee20000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee20000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY2>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy2_grf>; + status = "disabled"; + }; + system_sram2: sram@ff001000 { compatible = "mmio-sram"; reg = <0x0 0xff001000 0x0 0xef000>; diff --git a/include/dt-bindings/ata/ahci.h b/include/dt-bindings/ata/ahci.h new file mode 100644 index 0000000000..77997b3561 --- /dev/null +++ b/include/dt-bindings/ata/ahci.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause */ +/* + * This header provides constants for most AHCI bindings. + */ + +#ifndef _DT_BINDINGS_ATA_AHCI_H +#define _DT_BINDINGS_ATA_AHCI_H + +/* Host Bus Adapter generic platform capabilities */ +#define HBA_SSS (1 << 27) +#define HBA_SMPS (1 << 28) + +/* Host Bus Adapter port-specific platform capabilities */ +#define HBA_PORT_HPCP (1 << 18) +#define HBA_PORT_MPSP (1 << 19) +#define HBA_PORT_CPD (1 << 20) +#define HBA_PORT_ESP (1 << 21) +#define HBA_PORT_FBSCP (1 << 22) + +#endif -- 2.25.1

2 7

[PATCH v3 00/10] spi: bcm63xx-hsspi: driver and doc updates
by William Zhang 12 Aug '23

12 Aug '23

This patch series is the u-boot port from the recently accepted kernel Broadcom HSSPI driver patch series here [1]. It includes the accumulative updates and fixes for the driver from Broadcom. It also added a new driver for the updated SPI controller found in the new BCMBCA SoC. The device tree document is converted to yaml format and updated accordingly. Changes in v3: - Add Reviewed-by tags - Reorder the patch series for SPI changes and arch/doc changes - Move arch related Kconfig changes to SPI enabling patch - Separate the Kconfig BCM63XX_HSSPI dependency change to a dedicate patch - Combine multi-line condition into single line for config HAVE_SPI_CS_CTRL Changes in v2: - Add Álvaro Fernández Rojas as another maintainer William Zhang (10): spi: bcm63xx-hsspi: Make driver depend on BCMBCA arch spi: bcm63xx-hsspi: Fix multi-bit mode setting spi: bcm63xx-hsspi: Add new compatible string support spi: bcm63xx-hsspi: Add prepend mode support spi: bcmbca-hsspi: Add driver for newer HSSPI controller dt-bindings: spi: Add bcm63xx-hsspi controller support ARM: dts: broadcom: bcmbca: Add spi controller node arm64: dts: broadcom: bcmbca: Add spi controller node broadcom: bcmbca: Enable SPI drivers by default MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers MAINTAINERS | 9 + arch/arm/Kconfig | 2 + arch/arm/dts/bcm47622.dtsi | 18 + arch/arm/dts/bcm4908.dtsi | 17 + arch/arm/dts/bcm4912.dtsi | 20 + arch/arm/dts/bcm63138.dtsi | 18 + arch/arm/dts/bcm63146.dtsi | 19 + arch/arm/dts/bcm63148.dtsi | 18 + arch/arm/dts/bcm63158.dtsi | 15 +- arch/arm/dts/bcm63178.dtsi | 19 + arch/arm/dts/bcm6756.dtsi | 19 + arch/arm/dts/bcm6813.dtsi | 20 + arch/arm/dts/bcm6846.dtsi | 18 + arch/arm/dts/bcm6855.dtsi | 27 +- arch/arm/dts/bcm6856.dtsi | 23 +- arch/arm/dts/bcm6858.dtsi | 23 +- arch/arm/dts/bcm6878.dtsi | 19 + arch/arm/dts/bcm947622.dts | 4 + arch/arm/dts/bcm94908.dts | 4 + arch/arm/dts/bcm94912.dts | 4 + arch/arm/dts/bcm963138.dts | 4 + arch/arm/dts/bcm963146.dts | 4 + arch/arm/dts/bcm963148.dts | 4 + arch/arm/dts/bcm963158.dts | 4 + arch/arm/dts/bcm963178.dts | 4 + arch/arm/dts/bcm96756.dts | 4 + arch/arm/dts/bcm96813.dts | 4 + arch/arm/dts/bcm96846.dts | 4 + arch/arm/dts/bcm96855.dts | 4 + arch/arm/dts/bcm96856.dts | 4 + arch/arm/dts/bcm96858.dts | 4 + arch/arm/dts/bcm96878.dts | 4 + arch/arm/mach-bcmbca/Kconfig | 23 + .../spi/brcm,bcm63xx-hsspi.yaml | 134 ++++++ drivers/spi/Kconfig | 13 +- drivers/spi/Makefile | 1 + drivers/spi/bcm63xx_hsspi.c | 277 +++++++++++- drivers/spi/bcmbca_hsspi.c | 414 ++++++++++++++++++ 38 files changed, 1157 insertions(+), 69 deletions(-) create mode 100644 doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml create mode 100644 drivers/spi/bcmbca_hsspi.c -- 2.37.3

3 20

CFP open for RISC-V MC at Linux Plumbers Conference 2023
by Atish Patra 11 Aug '23

11 Aug '23

The CFP for topic proposals for the RISC-V micro conference[1] 2023 is open now. Please submit your proposal before it's too late! The Linux plumbers event will be both in person and remote (hybrid)virtual this year. More details can be found here [2]. We will start accepting proposals after 15th August 2023 to avoid last minute visa/travel hassles. The conference registration sells out pretty quickly too. Thus, we would prefer to sort out the schedule sooner than later. The final deadline is 15th October 2023 though. [1] https://lpc.events/event/16/contributions/1148/ [2] https://lpc.events/ -- Regards, Atish

2 3

[PATCH 00/16] bootstd: Improve ChromiumOS support
by Simon Glass 11 Aug '23

11 Aug '23

The ChromiumOS bootmeth is fairly basic at present. It is able to boot only x86 kernels and contains quite a few hard-coded offsets. This series tidies it up by bringing in some vboot structures and adding support for ARM. It adds a few more features to bootstd, including display of x86 setup information. So far this does not actually boot correctly on any ARM Chromebook: jerry - hangs when booting kernel bob - Bad Linux ARM64 Image magic! with lz4-compressed kernel Further work can address these issues. Simon Glass (16): bootstd: cros: Correct reporting of I/O errors bootstd: cros: Move partition reading into a function bootstd: cros: Bring in some ChromiumOS structures bootstd: cros: Support a kernel on either partition bootstd: cros: Decode some kernel preamble fields bootstd: cros: Simplify setup and cmdline expressions bootstd: Move common zimage functions to bootm.h bootstd: cros: Add docs for the kernel layout bootstd: cros: Add private info for ChromiumOS bootstd: Add private bootmeth data to the bootflow bootstd: cros: Add a function to read info from partition bootstd: cros: Add a function to read a kernel bootstd: cros: Split up reading info and kernel bootstd: Allow display of the x86 setup information bootstd: Add a command to read all files for a bootflow bootstd: cros: Add ARM support arch/x86/include/asm/zimage.h | 37 ---- arch/x86/lib/zimage.c | 8 +- boot/Kconfig | 4 +- boot/bootflow.c | 15 ++ boot/bootm.c | 37 ++++ boot/bootmeth-uclass.c | 10 + boot/bootmeth_cros.c | 363 ++++++++++++++++++++++++++++------ boot/bootmeth_cros.h | 197 ++++++++++++++++++ cmd/bootflow.c | 47 ++++- doc/usage/cmd/bootflow.rst | 139 ++++++++++++- include/bootflow.h | 15 +- include/bootm.h | 47 +++++ include/bootmeth.h | 23 +++ 13 files changed, 836 insertions(+), 106 deletions(-) create mode 100644 boot/bootmeth_cros.h -- 2.41.0.487.g6d72f3e995-goog

3 38

[PATCH v3 00/23] CONFIG_IS_ENABLED vs IS_ENABLED
by Troy Kisky 11 Aug '23

11 Aug '23

This patch set gets ready to checks the usage of CONFIG_IS_ENABLED/IS_ENABLED. After the set has been applied, you can delete test/usage_of_is_enabled_todo.txt and run test/usage_of_is_enabled_commit.sh The script test/usage_of_is_enabled_check.sh checks for new questionable uses of CONFIG_IS_ENABLED/IS_ENABLED and is added to .azure-pipelines.yml, and .gitlab-ci.yml version 3 changes: Dropped changes to puma-rk3399 and ringneck-px30 in favor of Quentin Schulz's patch https://patchwork.ozlabs.org/project/uboot/patch/20230301-tsd-env-nowhere-k… https://patchwork.ozlabs.org/project/uboot/patch/20230301-tsd-env-nowhere-k… Please apply them before this series. Drop gateworks: venice: Always define setup_fec and setup_eqos Drop arm: cpu: armv7: ls102xa: fdt: remove eth_device support Simon's patches took care of these Add to todo list, these new questionable uses that snuck into the code. PARTITION_TYPE_GUID PHY_ATHEROS RTC_SANDBOX Changes in v3: remove error entirely and prevent with Kconfig new patch to address Tom's concerns - Rebase on Simon's s/CMD_SATA/SATA/ change - commit message updated Changes in v2: - new patch - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - include linux/kconfig.h from tools/Makefile - as suggested by Simon - changed condition of when to include field bdf - added protection to another instance of bdf in uart.c - Thanks to Simon for getting this corrected - use normal if, not preprocessor - new in series - use an accessor function gd_set_pci_ram_top Troy Kisky (23): kconfig: add IS_ENABLED_NOCHECK to bypass usage_of_is_enabled_check cmd: nvedit: remove error check, handle with Kconfig lib: crc32: prepare for CONFIG_IS_ENABLED changes lib: md5: prepare for CONFIG_IS_ENABLED changes lib: sha1: prepare for CONFIG_IS_ENABLED changes lib: sha256: prepare for CONFIG_IS_ENABLED changes lib: sha512: prepare for CONFIG_IS_ENABLED changes watchdog: add and use Kconfig HAS_WATCHDOG_RUNNING tools: prevent CONFIG_IS_ENABLED errors by including linux/kconfig.h tools: Makefile: prepare for CONFIG_IS_ENABLED changes by adding CONFIG_TOOLS_xxx x86: cpu: qemu: qemu: remove SPL use with CONFIG_IS_ENABLED config_distro_bootcmd: remove booting environment variables from SPL environment ofnode: fdt_support definitions needed if OF_CONTROL is enabled fdt_support: always define fdt_fixup_mtdparts m53menlo: define ft_board_setup only if CONFIG_IS_ENABLED(OF_LIBFDT) freescale: common: pfuze: define pfuze_mode_init only if defined(CONFIG_DM_PMIC) ns16550: match when to define bdf with uart code solidrun: mx6cuboxi: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA wandboard: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA arm: mach-imx: use CONFIG_$(SPL_)SATA instead of CONFIG_SATA x86: cpu: i386: cpu: only set pci_ram_top if CONFIG_IS_ENABLED(PCI) power: pmic: add dm style definitions if not CONFIG_IS_ENABLED(POWER_LEGACY) CI: add test/usage_of_is_enabled_check.sh .azure-pipelines.yml | 11 ++ .gitlab-ci.yml | 5 + arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-omap2/boot-common.c | 5 +- arch/m68k/lib/time.c | 7 +- arch/powerpc/lib/interrupts.c | 5 +- arch/powerpc/lib/ticks.S | 2 +- arch/x86/cpu/apollolake/uart.c | 4 + arch/x86/cpu/i386/cpu.c | 2 +- arch/x86/cpu/qemu/qemu.c | 2 +- board/astro/mcf5373l/fpga.c | 10 +- board/freescale/common/pfuze.c | 2 +- board/menlo/m53menlo/m53menlo.c | 2 + board/solidrun/mx6cuboxi/mx6cuboxi.c | 5 +- board/wandboard/wandboard.c | 5 +- boot/image-board.c | 2 +- cmd/nvedit.c | 32 +--- cmd/ximg.c | 10 +- common/board_f.c | 4 +- common/spl/Kconfig | 4 + drivers/crypto/aspeed/aspeed_hace.c | 2 +- drivers/crypto/hash/hash_sw.c | 2 +- drivers/timer/mpc83xx_timer.c | 5 +- drivers/watchdog/Kconfig | 3 + env/Kconfig | 17 ++- fs/cramfs/uncompress.c | 9 +- include/asm-generic/global_data.h | 6 + include/config_distro_bootcmd.h | 23 +++ include/fdt_support.h | 26 ++-- include/linux/kconfig.h | 5 + include/ns16550.h | 2 +- include/power/pmic.h | 2 +- include/watchdog.h | 7 +- lib/bzip2/bzlib.c | 5 +- lib/bzip2/bzlib_decompress.c | 20 +-- lib/crc32.c | 11 +- lib/md5.c | 7 +- lib/sha1.c | 7 +- lib/sha256.c | 7 +- lib/sha512.c | 11 +- test/usage_of_is_enabled_check.sh | 19 +++ test/usage_of_is_enabled_commit.sh | 12 ++ test/usage_of_is_enabled_correct.sh | 50 +++++++ test/usage_of_is_enabled_exempt.txt | 9 ++ test/usage_of_is_enabled_list.sh | 86 +++++++++++ test/usage_of_is_enabled_splcfg.txt | 21 +++ test/usage_of_is_enabled_todo.txt | 213 +++++++++++++++++++++++++++ tools/Makefile | 3 + 48 files changed, 584 insertions(+), 127 deletions(-) create mode 100755 test/usage_of_is_enabled_check.sh create mode 100755 test/usage_of_is_enabled_commit.sh create mode 100755 test/usage_of_is_enabled_correct.sh create mode 100644 test/usage_of_is_enabled_exempt.txt create mode 100755 test/usage_of_is_enabled_list.sh create mode 100644 test/usage_of_is_enabled_splcfg.txt create mode 100644 test/usage_of_is_enabled_todo.txt -- 2.34.1

4 43

[PATCH v2 0/9] Add support for PMICs used on Tegra 3 devices
by Svyatoslav Ryhel 11 Aug '23

11 Aug '23

Patch set adds basic support for PMICs used in many Tegra 3 devices. All PMIC drivers are based on datasheets provided by vendors. Implemented API include regulator set/get voltage enable/disable and basic PMIC r/w capabilities. Created poweroff API for pmic to be able to call do_poweroff directly from within pmic driver. PMIC responcible for poweroff shoud be marked as system-power-controller in device tree. Drivers were tested by me on LG P895 (max77663), HTC One X (TPS80032) and ASUS TF300T (tps65911). Calculations and behavior were correct, predictable and reproducible. --- Changes from v1: - created poweroff API for PMIC and integrated it call into do_poweroff - added poweroff function to submitted max77663, tps80032 and tps65911 drivers - fixed registers asignments for regulators with non-numeric name (ldoln, ldousb, vddctrl) --- Svyatoslav Ryhel (9): power: pmic-uclass: implement poweroff ops cmd: boot: implement PMIC based poweroff power: pmic: palmas: support TI TPS65913 PMIC power: pmic: add the base MAX77663 PMIC support power: regulator: max77663: add regulator support power: pmic: add the base TPS80031 PMIC support power: regulator: tps80031: add regulator support power: pmic: tps65910: add TPS65911 PMIC support power: regulator: tps65911: add regulator support cmd/Kconfig | 6 + cmd/boot.c | 40 ++ doc/device-tree-bindings/pmic/max77663.txt | 84 +++++ doc/device-tree-bindings/pmic/tps65911.txt | 78 ++++ doc/device-tree-bindings/pmic/tps80031.txt | 76 ++++ drivers/power/pmic/Kconfig | 12 + drivers/power/pmic/Makefile | 2 + drivers/power/pmic/max77663.c | 105 ++++++ drivers/power/pmic/palmas.c | 1 + drivers/power/pmic/pmic-uclass.c | 12 + drivers/power/pmic/pmic_tps65910_dm.c | 49 ++- drivers/power/pmic/tps80031.c | 97 +++++ drivers/power/regulator/Kconfig | 24 ++ drivers/power/regulator/Makefile | 3 + drivers/power/regulator/max77663_regulator.c | 358 ++++++++++++++++++ drivers/power/regulator/tps65911_regulator.c | 377 +++++++++++++++++++ drivers/power/regulator/tps80031_regulator.c | 296 +++++++++++++++ include/power/max77663.h | 44 +++ include/power/pmic.h | 13 + include/power/tps65910_pmic.h | 52 +++ include/power/tps80031.h | 45 +++ 21 files changed, 1771 insertions(+), 3 deletions(-) create mode 100644 doc/device-tree-bindings/pmic/max77663.txt create mode 100644 doc/device-tree-bindings/pmic/tps65911.txt create mode 100644 doc/device-tree-bindings/pmic/tps80031.txt create mode 100644 drivers/power/pmic/max77663.c create mode 100644 drivers/power/pmic/tps80031.c create mode 100644 drivers/power/regulator/max77663_regulator.c create mode 100644 drivers/power/regulator/tps65911_regulator.c create mode 100644 drivers/power/regulator/tps80031_regulator.c create mode 100644 include/power/max77663.h create mode 100644 include/power/tps80031.h -- 2.39.2

2 24

Re: Strange construct in binman description
by Marcel Ziswiler 11 Aug '23

11 Aug '23

Hi Simon On Jul 23, 2023 05:48, Simon Glass <sjg(a)chromium.org> wrote: Hi Marcel, I just noticed this in an imx8 description: binman_configuration: @config-SEQ { I remember having stumbled over this before but I do not remember any exact details, sorry. Since this is a generator node, binman blindly generates a phandle for each not it generates. This means that if there is more than one config node, then they will have duplicate phandles. I have sent a series to correct this, but it fails the build on: imx8mm_venice imx8mn_venice imx8mp_venice Ah, now I get it. You mixed up venice (Gate works) with verdin (Toradex). I am a bit unsure about what this is supposed to do. Could you please take a look? I'm more than happy to do that but you are probably much better off enquiring Tim Harvey from Gateworks about this. I put him on CC. Regards, Simon Cheers Marcel

3 8

[PATCH] watchdog: ftwdt010: need to reset watchdog in ftwdt010_wdt_start()
by Sergei Antonov 10 Aug '23

10 Aug '23

ftwdt010_wdt_start() has to call ftwdt010_wdt_reset() after setting-up the timeout in the same fashion ftwdt010_wdt_expire_now() does it. Without this patch the "wdt start <ms>" command does not actually start the watchdog timer until the "wdt reset" command is executed. Signed-off-by: Sergei Antonov <saproj(a)gmail.com> --- drivers/watchdog/ftwdt010_wdt.c | 40 +++++++++++++++++---------------- 1 file changed, 21 insertions(+), 19 deletions(-) diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c index a6b33b17209d..1f5f301b1251 100644 --- a/drivers/watchdog/ftwdt010_wdt.c +++ b/drivers/watchdog/ftwdt010_wdt.c @@ -25,8 +25,27 @@ struct ftwdt010_wdt_priv { struct ftwdt010_wdt __iomem *regs; }; +static int ftwdt010_wdt_reset(struct udevice *dev) +{ + struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); + struct ftwdt010_wdt *wd = priv->regs; + + debug("Reset WDT..\n"); + + /* clear control register */ + writel(0, &wd->wdcr); + + /* Write Magic number */ + writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart); + + /* Enable WDT */ + writel(FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE, &wd->wdcr); + + return 0; +} + /* - * Set the watchdog time interval. + * Set the watchdog time interval and start the timer. * Counter is 32 bit. */ static int ftwdt010_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) @@ -52,24 +71,7 @@ static int ftwdt010_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) writel(reg, &wd->wdload); - return 0; -} - -static int ftwdt010_wdt_reset(struct udevice *dev) -{ - struct ftwdt010_wdt_priv *priv = dev_get_priv(dev); - struct ftwdt010_wdt *wd = priv->regs; - - /* clear control register */ - writel(0, &wd->wdcr); - - /* Write Magic number */ - writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart); - - /* Enable WDT */ - writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr); - - return 0; + return ftwdt010_wdt_reset(dev); } static int ftwdt010_wdt_stop(struct udevice *dev) -- 2.37.2

2 2

[PATCH 00/29] Add support for MediaTek MT7988 SoC
by Weijie Gao 10 Aug '23

10 Aug '23

This patch series add support for MediaTek MT7988 SoC with its reference boards and related drivers. This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these boards. The clock, pinctrl drivers and the SoC initializaton code are also included. Product spec for MT7988: https://www.mediatek.com/products/broadband-wifi/mediatek-filogic-880 Weijie Gao (29): arm: mediatek: retrieve ram_base from dts node for armv8 platform board: mediatek: update config headers spi: mtk_spim: get spi clk rate only once spi: mtk_spim: clear IRQ enable bits serial: mtk: initial priv data before using reset: mediatek: check malloc return valaue before use i2c: mediatek: fix I2C usability for MT7981 arm: dts: enable i2c support for MediaTek MT7981 pwm: mtk: add support for MediaTek MT7988 SoC clk: mediatek: add clock driver support for MediaTek MT7988 SoC reset: mediatek: add reset definition for MediaTek MT7988 SoC pinctrl: mediatek: convert most definitions to const pinctrl: mediatek: fix the return value in driving configuration functions pinctrl: mediatek: add pinmux_set ops support pinctrl: mediatek: add pinctrl driver for MT7988 SoC net: mediatek: connect switch to PSE only when starting eth is requested net: mediatek: optimize the switch reset delay wait time net: mediatek: fix direct MDIO clause 45 access via SoC net: mediatek: add missing static qualifier net: mediatek: add support for SGMII 1Gbps auto-negotiation mode arm: dts: medaitek: convert gmac link mode to 2500base-x net: mediatek: add support for GMAC/USB3 PHY mux mode for MT7981 arm: dts: mediatek: add infracfg registers to support GMAC/USB3 Co-PHY net: mediatek: add USXGMII support net: mediatek: add support for NETSYS v3 net: mediatek: add support for MediaTek MT7988 SoC tools: mtk_image: use uint32_t for ghf header magic and version arm: mediatek: add support for MediaTek MT7988 SoC board: mediatek: add MT7988 reference boards arch/arm/dts/Makefile | 2 + arch/arm/dts/mt7622-bananapi-bpi-r64.dts | 4 +- arch/arm/dts/mt7622-rfb.dts | 4 +- arch/arm/dts/mt7629-rfb.dts | 4 +- arch/arm/dts/mt7981-emmc-rfb.dts | 9 +- arch/arm/dts/mt7981-rfb.dts | 9 +- arch/arm/dts/mt7981-sd-rfb.dts | 9 +- arch/arm/dts/mt7981.dtsi | 21 + arch/arm/dts/mt7986a-bpi-r3-sd.dts | 5 + arch/arm/dts/mt7986a-rfb.dts | 9 +- arch/arm/dts/mt7986a-sd-rfb.dts | 9 +- arch/arm/dts/mt7986b-rfb.dts | 9 +- arch/arm/dts/mt7986b-sd-rfb.dts | 9 +- arch/arm/dts/mt7988-rfb.dts | 182 +++ arch/arm/dts/mt7988-sd-rfb.dts | 134 ++ arch/arm/dts/mt7988-u-boot.dtsi | 25 + arch/arm/dts/mt7988.dtsi | 391 +++++ arch/arm/mach-mediatek/Kconfig | 13 +- arch/arm/mach-mediatek/Makefile | 1 + arch/arm/mach-mediatek/mt7622/init.c | 13 +- arch/arm/mach-mediatek/mt7981/init.c | 11 +- arch/arm/mach-mediatek/mt7986/init.c | 11 +- arch/arm/mach-mediatek/mt7988/Makefile | 4 + arch/arm/mach-mediatek/mt7988/init.c | 63 + arch/arm/mach-mediatek/mt7988/lowlevel_init.S | 30 + board/mediatek/mt7622/mt7622_rfb.c | 1 - board/mediatek/mt7988/MAINTAINERS | 7 + board/mediatek/mt7988/Makefile | 3 + board/mediatek/mt7988/mt7988_rfb.c | 10 + configs/mt7988_rfb_defconfig | 83 ++ configs/mt7988_sd_rfb_defconfig | 71 + drivers/clk/mediatek/Makefile | 1 + drivers/clk/mediatek/clk-mt7988.c | 1123 +++++++++++++++ drivers/i2c/mtk_i2c.c | 45 +- drivers/net/mtk_eth.c | 572 +++++++- drivers/net/mtk_eth.h | 69 + drivers/pinctrl/mediatek/Kconfig | 4 + drivers/pinctrl/mediatek/Makefile | 1 + drivers/pinctrl/mediatek/pinctrl-mt7622.c | 474 +++--- drivers/pinctrl/mediatek/pinctrl-mt7623.c | 650 ++++----- drivers/pinctrl/mediatek/pinctrl-mt7629.c | 174 +-- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 270 ++-- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 145 +- drivers/pinctrl/mediatek/pinctrl-mt7988.c | 1274 +++++++++++++++++ drivers/pinctrl/mediatek/pinctrl-mt8512.c | 24 +- drivers/pinctrl/mediatek/pinctrl-mt8516.c | 18 +- drivers/pinctrl/mediatek/pinctrl-mt8518.c | 20 +- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 22 +- drivers/pinctrl/mediatek/pinctrl-mtk-common.h | 8 +- drivers/pwm/pwm-mtk.c | 7 + drivers/reset/reset-mediatek.c | 3 + drivers/serial/serial_mtk.c | 1 + drivers/spi/mtk_spim.c | 24 +- include/configs/mt7620.h | 3 +- include/configs/mt7621.h | 6 +- include/configs/mt7622.h | 10 - include/configs/mt7623.h | 8 - include/configs/mt7628.h | 5 +- include/configs/mt7629.h | 13 +- include/configs/mt7981.h | 9 - include/configs/mt7986.h | 9 - include/configs/mt7988.h | 14 + include/dt-bindings/clock/mt7988-clk.h | 349 +++++ include/dt-bindings/reset/mt7988-reset.h | 31 + tools/mtk_image.c | 10 +- tools/mtk_image.h | 6 +- 66 files changed, 5533 insertions(+), 1025 deletions(-) create mode 100644 arch/arm/dts/mt7988-rfb.dts create mode 100644 arch/arm/dts/mt7988-sd-rfb.dts create mode 100644 arch/arm/dts/mt7988-u-boot.dtsi create mode 100644 arch/arm/dts/mt7988.dtsi create mode 100644 arch/arm/mach-mediatek/mt7988/Makefile create mode 100644 arch/arm/mach-mediatek/mt7988/init.c create mode 100644 arch/arm/mach-mediatek/mt7988/lowlevel_init.S create mode 100644 board/mediatek/mt7988/MAINTAINERS create mode 100644 board/mediatek/mt7988/Makefile create mode 100644 board/mediatek/mt7988/mt7988_rfb.c create mode 100644 configs/mt7988_rfb_defconfig create mode 100644 configs/mt7988_sd_rfb_defconfig create mode 100644 drivers/clk/mediatek/clk-mt7988.c create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7988.c create mode 100644 include/configs/mt7988.h create mode 100644 include/dt-bindings/clock/mt7988-clk.h create mode 100644 include/dt-bindings/reset/mt7988-reset.h -- 2.17.1

7 38

[PATCH 1/2] Revert "lib: string: Fix strlcpy return value", fix callers
by Matthias Schiffer 09 Aug '23

09 Aug '23

Both the Linux kernel and libbsd agree that strlcpy() should always return strlen(src) and not include the NUL termination. The incorrect U-Boot implementation makes it impossible to check the return value for truncation, and breaks code written with the usual implementation in mind (for example, fdtdec_add_reserved_memory() was subtly broken). I reviewed all callers of strlcpy() and strlcat() and fixed them according to my understanding of the intended function. This reverts commit d3358ecc54be0bc3b4dd11f7a63eab0a2842f772 and adds related fixes. Fixes: d3358ecc54be ("lib: string: Fix strlcpy return value") Signed-off-by: Matthias Schiffer <matthias.schiffer(a)ew.tq-group.com> --- board/amlogic/vim3/vim3.c | 6 +++--- drivers/fastboot/fb_getvar.c | 2 +- lib/string.c | 14 +++++++------- test/lib/strlcat.c | 4 ++-- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index fcd60ab1e05..8bdfb302f72 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -104,8 +104,8 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) } /* Update PHY names (mandatory to disable USB3.0) */ - len = strlcpy(data, "usb2-phy0", 32); - len += strlcpy(&data[len], "usb2-phy1", 32 - len); + len = strlcpy(data, "usb2-phy0", 32) + 1; + len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1; ret = fdt_setprop(blob, node, "phy-names", data, len); if (ret < 0) { printf("vim3: failed to update usb phy names property (%d)\n", ret); @@ -132,7 +132,7 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) } /* Enable PCIe */ - len = strlcpy(data, "okay", 32); + len = strlcpy(data, "okay", 32) + 1; ret = fdt_setprop(blob, node, "status", data, len); if (ret < 0) { printf("vim3: failed to enable pcie node (%d)\n", ret); diff --git a/drivers/fastboot/fb_getvar.c b/drivers/fastboot/fb_getvar.c index dd3475e0a8b..d9f0f07b2bc 100644 --- a/drivers/fastboot/fb_getvar.c +++ b/drivers/fastboot/fb_getvar.c @@ -183,7 +183,7 @@ static void __maybe_unused getvar_has_slot(char *part_name, char *response) /* part_name_wslot = part_name + "_a" */ len = strlcpy(part_name_wslot, part_name, PART_NAME_LEN - 3); - if (len > PART_NAME_LEN - 3) + if (len >= PART_NAME_LEN - 3) goto fail; strcat(part_name_wslot, "_a"); diff --git a/lib/string.c b/lib/string.c index ecea755f405..f2c61471288 100644 --- a/lib/string.c +++ b/lib/string.c @@ -116,20 +116,18 @@ char * strncpy(char * dest,const char *src,size_t count) * of course, the buffer size is zero). It does not pad * out the result like strncpy() does. * - * Return: the number of bytes copied + * Return: strlen(src) */ size_t strlcpy(char *dest, const char *src, size_t size) { - if (size) { - size_t srclen = strlen(src); - size_t len = (srclen >= size) ? size - 1 : srclen; + size_t ret = strlen(src); + if (size) { + size_t len = (ret >= size) ? size - 1 : ret; memcpy(dest, src, len); dest[len] = '\0'; - return len + 1; } - - return 0; + return ret; } #endif @@ -191,6 +189,8 @@ char * strncat(char *dest, const char *src, size_t count) * Compatible with *BSD: the result is always a valid NUL-terminated string that * fits in the buffer (unless, of course, the buffer size is zero). It does not * write past @size like strncat() does. + * + * Return: min(strlen(dest), size) + strlen(src) */ size_t strlcat(char *dest, const char *src, size_t size) { diff --git a/test/lib/strlcat.c b/test/lib/strlcat.c index a0ec037388b..d8453fe78e2 100644 --- a/test/lib/strlcat.c +++ b/test/lib/strlcat.c @@ -43,11 +43,11 @@ static int do_test_strlcat(struct unit_test_state *uts, int line, size_t align1, s2[i] = 32 + 23 * i % (127 - 32); s2[len2 - 1] = '\0'; - expected = len2 < n ? min(len1 + len2 - 1, n) : n; + expected = min(strlen(s2), n) + strlen(s1); actual = strlcat(s2, s1, n); if (expected != actual) { ut_failf(uts, __FILE__, line, __func__, - "strlcat(s2, s1, 2) == len2 < n ? min(len1 + len2, n) : n", + "strlcat(s2, s1, n) == min(len2, n) + len1", "Expected %#zx (%zd), got %#zx (%zd)", expected, expected, actual, actual); return CMD_RET_FAILURE; -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider https://www.tq-group.com/

5 9