April 2023 - U-Boot

[PATCH] fastboot: Only call the bootm command if it is enabled
by Samuel Holland 01 Jun '23

01 Jun '23

This fixes an error with trying to link against do_bootm() when CONFIG_CMD_BOOTM is disabled. Signed-off-by: Samuel Holland <samuel(a)sholland.org> --- drivers/fastboot/fb_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/fastboot/fb_common.c b/drivers/fastboot/fb_common.c index 57b6182c46a..20aa80838ae 100644 --- a/drivers/fastboot/fb_common.c +++ b/drivers/fastboot/fb_common.c @@ -135,7 +135,7 @@ void fastboot_boot(void) s = env_get("fastboot_bootcmd"); if (s) { run_command(s, CMD_FLAG_ENV); - } else { + } else if (IS_ENABLED(CONFIG_CMD_BOOTM)) { static char boot_addr_start[20]; static char *const bootm_args[] = { "bootm", boot_addr_start, NULL -- 2.39.2

4 3

[PATCH 1/5] mtd/spinand: rework detect procedure for different READ_ID operation
by Frieder Schrempf 31 May '23

31 May '23

From: Mikhail Kshevetskiy <mikhail.kshevetskiy(a)iopsys.eu> Currently there are 3 different variants of read_id implementation: 1. opcode only. Found in GD5FxGQ4xF. 2. opcode + 1 addr byte. Found in GD5GxGQ4xA/E 3. opcode + 1 dummy byte. Found in other currently supported chips. Original implementation was for variant 1 and let detect function of chips with variant 2 and 3 to ignore the first byte. This isn't robust: 1. For chips of variant 2, if SPI master doesn't keep MOSI low during read, chip will get a random id offset, and the entire id buffer will shift by that offset, causing detect failure. 2. For chips of variant 1, if it happens to get a devid that equals to manufacture id of variant 2 or 3 chips, it'll get incorrectly detected. This patch reworks detect procedure to address problems above. New logic do detection for all variants separatedly, in 1-2-3 order. Since all current detect methods do exactly the same id matching procedure, unify them into core.c and remove detect method from manufacture_ops. This is a rework of Chuanhong Guo <gch981213(a)gmail.com> patch submitted to linux kernel Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy(a)iopsys.eu> Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> --- drivers/mtd/nand/spi/core.c | 104 +++++++++++++++++++----------- drivers/mtd/nand/spi/gigadevice.c | 30 ++------- drivers/mtd/nand/spi/macronix.c | 45 +++++-------- drivers/mtd/nand/spi/micron.c | 50 ++++++-------- drivers/mtd/nand/spi/toshiba.c | 66 +++++++++---------- drivers/mtd/nand/spi/winbond.c | 34 ++-------- include/linux/mtd/spinand.h | 66 ++++++++++++------- 7 files changed, 187 insertions(+), 208 deletions(-) diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 134bf22c805..d92de9c24e3 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -17,6 +17,7 @@ #include <linux/mtd/spinand.h> #include <linux/of.h> #include <linux/slab.h> +#include <linux/string.h> #include <linux/spi/spi.h> #include <linux/spi/spi-mem.h> #else @@ -451,9 +452,11 @@ out: return status & STATUS_BUSY ? -ETIMEDOUT : 0; } -static int spinand_read_id_op(struct spinand_device *spinand, u8 *buf) +static int spinand_read_id_op(struct spinand_device *spinand, u8 naddr, + u8 ndummy, u8 *buf) { - struct spi_mem_op op = SPINAND_READID_OP(0, spinand->scratchbuf, + struct spi_mem_op op = SPINAND_READID_OP(naddr, ndummy, + spinand->scratchbuf, SPINAND_MAX_ID_LEN); int ret; @@ -807,21 +810,6 @@ static int spinand_mtd_block_isreserved(struct mtd_info *mtd, loff_t offs) return ret; } -const struct spi_mem_op * -spinand_find_supported_op(struct spinand_device *spinand, - const struct spi_mem_op *ops, - unsigned int nops) -{ - unsigned int i; - - for (i = 0; i < nops; i++) { - if (spi_mem_supports_op(spinand->slave, &ops[i])) - return &ops[i]; - } - - return NULL; -} - static const struct nand_ops spinand_ops = { .erase = spinand_erase, .markbad = spinand_markbad, @@ -836,24 +824,62 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = { &winbond_spinand_manufacturer, }; -static int spinand_manufacturer_detect(struct spinand_device *spinand) +static int spinand_manufacturer_match(struct spinand_device *spinand, + enum spinand_readid_method rdid_method) { + u8 *id = spinand->id.data; unsigned int i; int ret; for (i = 0; i < ARRAY_SIZE(spinand_manufacturers); i++) { - ret = spinand_manufacturers[i]->ops->detect(spinand); - if (ret > 0) { - spinand->manufacturer = spinand_manufacturers[i]; - return 0; - } else if (ret < 0) { - return ret; - } - } + const struct spinand_manufacturer *manufacturer = + spinand_manufacturers[i]; + if (id[0] != manufacturer->id) + continue; + + ret = spinand_match_and_init(spinand, + manufacturer->chips, + manufacturer->nchips, + rdid_method); + if (ret < 0) + continue; + + spinand->manufacturer = manufacturer; + return 0; + } return -ENOTSUPP; } +static int spinand_id_detect(struct spinand_device *spinand) +{ + u8 *id = spinand->id.data; + int ret; + + ret = spinand_read_id_op(spinand, 0, 0, id); + if (ret) + return ret; + ret = spinand_manufacturer_match(spinand, SPINAND_READID_METHOD_OPCODE); + if (!ret) + return 0; + + ret = spinand_read_id_op(spinand, 1, 0, id); + if (ret) + return ret; + ret = spinand_manufacturer_match(spinand, + SPINAND_READID_METHOD_OPCODE_ADDR); + if (!ret) + return 0; + + ret = spinand_read_id_op(spinand, 0, 1, id); + if (ret) + return ret; + ret = spinand_manufacturer_match(spinand, + SPINAND_READID_METHOD_OPCODE_DUMMY); + + return ret; +} + static int spinand_manufacturer_init(struct spinand_device *spinand) { if (spinand->manufacturer->ops->init) @@ -909,9 +935,9 @@ spinand_select_op_variant(struct spinand_device *spinand, * @spinand: SPI NAND object * @table: SPI NAND device description table * @table_size: size of the device description table + * @rdid_method: read id method to match * - * Should be used by SPI NAND manufacturer drivers when they want to find a - * match between a device ID retrieved through the READ_ID command and an + * Match between a device ID retrieved through the READ_ID command and an * entry in the SPI NAND description table. If a match is found, the spinand * object will be initialized with information provided by the matching * spinand_info entry. @@ -920,8 +946,10 @@ spinand_select_op_variant(struct spinand_device *spinand, */ int spinand_match_and_init(struct spinand_device *spinand, const struct spinand_info *table, - unsigned int table_size, u8 devid) + unsigned int table_size, + enum spinand_readid_method rdid_method) { + u8 *id = spinand->id.data; struct nand_device *nand = spinand_to_nand(spinand); unsigned int i; @@ -929,13 +957,17 @@ int spinand_match_and_init(struct spinand_device *spinand, const struct spinand_info *info = &table[i]; const struct spi_mem_op *op; - if (devid != info->devid) + if (rdid_method != info->devid.method) + continue; + + if (memcmp(id + 1, info->devid.id, info->devid.len)) continue; nand->memorg = table[i].memorg; nand->eccreq = table[i].eccreq; spinand->eccinfo = table[i].eccinfo; spinand->flags = table[i].flags; + spinand->id.len = 1 + table[i].devid.len; spinand->select_target = table[i].select_target; op = spinand_select_op_variant(spinand, @@ -971,13 +1003,7 @@ static int spinand_detect(struct spinand_device *spinand) if (ret) return ret; - ret = spinand_read_id_op(spinand, spinand->id.data); - if (ret) - return ret; - - spinand->id.len = SPINAND_MAX_ID_LEN; - - ret = spinand_manufacturer_detect(spinand); + ret = spinand_id_detect(spinand); if (ret) { dev_err(spinand->slave->dev, "unknown raw ID %*phN\n", SPINAND_MAX_ID_LEN, spinand->id.data); @@ -1081,11 +1107,11 @@ static int spinand_init(struct spinand_device *spinand) for (i = 0; i < nand->memorg.ntargets; i++) { ret = spinand_select_target(spinand, i); if (ret) - goto err_free_bufs; + goto err_manuf_cleanup; ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); if (ret) - goto err_free_bufs; + goto err_manuf_cleanup; } ret = nanddev_init(nand, &spinand_ops, THIS_MODULE); diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c index a2c93486f49..43b353a3e7e 100644 --- a/drivers/mtd/nand/spi/gigadevice.c +++ b/drivers/mtd/nand/spi/gigadevice.c @@ -158,7 +158,8 @@ static const struct mtd_ooblayout_ops gd5fxgqxxexxg_ooblayout = { }; static const struct spinand_info gigadevice_spinand_table[] = { - SPINAND_INFO("GD5F1GQ4UExxG", 0xd1, + SPINAND_INFO("GD5F1GQ4UExxG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xd1), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&gd5fxgq4_read_cache_variants, @@ -167,7 +168,8 @@ static const struct spinand_info gigadevice_spinand_table[] = { 0, SPINAND_ECCINFO(&gd5fxgqxxexxg_ooblayout, gd5fxgq4xexxg_ecc_get_status)), - SPINAND_INFO("GD5F1GQ5UExxG", 0x51, + SPINAND_INFO("GD5F1GQ5UExxG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x51), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&gd5f1gq5_read_cache_variants, @@ -178,33 +180,13 @@ static const struct spinand_info gigadevice_spinand_table[] = { gd5fxgq5xexxg_ecc_get_status)), }; -static int gigadevice_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * For GD NANDs, There is an address byte needed to shift in before IDs - * are read out, so the first byte in raw_id is dummy. - */ - if (id[1] != SPINAND_MFR_GIGADEVICE) - return 0; - - ret = spinand_match_and_init(spinand, gigadevice_spinand_table, - ARRAY_SIZE(gigadevice_spinand_table), - id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = { - .detect = gigadevice_spinand_detect, }; const struct spinand_manufacturer gigadevice_spinand_manufacturer = { .id = SPINAND_MFR_GIGADEVICE, .name = "GigaDevice", + .chips = gigadevice_spinand_table, + .nchips = ARRAY_SIZE(gigadevice_spinand_table), .ops = &gigadevice_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c index 6d643a8000d..08f7d69d8c6 100644 --- a/drivers/mtd/nand/spi/macronix.c +++ b/drivers/mtd/nand/spi/macronix.c @@ -105,7 +105,8 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand, } static const struct spinand_info macronix_spinand_table[] = { - SPINAND_INFO("MX35LF1GE4AB", 0x12, + SPINAND_INFO("MX35LF1GE4AB", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x12), NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -114,7 +115,8 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), - SPINAND_INFO("MX35LF2GE4AB", 0x22, + SPINAND_INFO("MX35LF2GE4AB", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x22), NAND_MEMORG(1, 2048, 64, 64, 2048, 2, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -122,7 +124,8 @@ static const struct spinand_info macronix_spinand_table[] = { &update_cache_variants), SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)), - SPINAND_INFO("MX35UF4GE4AD", 0xb7, + SPINAND_INFO("MX35UF4GE4AD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xb7), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -131,7 +134,8 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), - SPINAND_INFO("MX35UF2GE4AD", 0xa6, + SPINAND_INFO("MX35UF2GE4AD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa6), NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -140,7 +144,8 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), - SPINAND_INFO("MX35UF2GE4AC", 0xa2, + SPINAND_INFO("MX35UF2GE4AC", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa2), NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -149,7 +154,8 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), - SPINAND_INFO("MX35UF1GE4AD", 0x96, + SPINAND_INFO("MX35UF1GE4AD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x96), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -158,7 +164,8 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), - SPINAND_INFO("MX35UF1GE4AC", 0x92, + SPINAND_INFO("MX35UF1GE4AC", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x92), NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -170,33 +177,13 @@ static const struct spinand_info macronix_spinand_table[] = { }; -static int macronix_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Macronix SPI NAND read ID needs a dummy byte, so the first byte in - * raw_id is garbage. - */ - if (id[1] != SPINAND_MFR_MACRONIX) - return 0; - - ret = spinand_match_and_init(spinand, macronix_spinand_table, - ARRAY_SIZE(macronix_spinand_table), - id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = { - .detect = macronix_spinand_detect, }; const struct spinand_manufacturer macronix_spinand_manufacturer = { .id = SPINAND_MFR_MACRONIX, .name = "Macronix", + .chips = macronix_spinand_table, + .nchips = ARRAY_SIZE(macronix_spinand_table), .ops = &macronix_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c index 6bacf14aafe..cecd3db9584 100644 --- a/drivers/mtd/nand/spi/micron.c +++ b/drivers/mtd/nand/spi/micron.c @@ -120,7 +120,8 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand, static const struct spinand_info micron_spinand_table[] = { /* M79A 2Gb 3.3V */ - SPINAND_INFO("MT29F2G01ABAGD", 0x24, + SPINAND_INFO("MT29F2G01ABAGD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x24), NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -130,7 +131,8 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_ECCINFO(&micron_8_ooblayout, micron_8_ecc_get_status)), /* M79A 2Gb 1.8V */ - SPINAND_INFO("MT29F2G01ABBGD", 0x25, + SPINAND_INFO("MT29F2G01ABBGD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x25), NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -140,7 +142,8 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_ECCINFO(&micron_8_ooblayout, micron_8_ecc_get_status)), /* M78A 1Gb 3.3V */ - SPINAND_INFO("MT29F1G01ABAFD", 0x14, + SPINAND_INFO("MT29F1G01ABAFD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x14), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -150,7 +153,8 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_ECCINFO(&micron_8_ooblayout, micron_8_ecc_get_status)), /* M78A 1Gb 1.8V */ - SPINAND_INFO("MT29F1G01ABAFD", 0x15, + SPINAND_INFO("MT29F1G01ABAFD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x15), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -160,7 +164,8 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_ECCINFO(&micron_8_ooblayout, micron_8_ecc_get_status)), /* M79A 4Gb 3.3V */ - SPINAND_INFO("MT29F4G01ADAGD", 0x36, + SPINAND_INFO("MT29F4G01ADAGD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x36), NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 2), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -171,7 +176,8 @@ static const struct spinand_info micron_spinand_table[] = { micron_8_ecc_get_status), SPINAND_SELECT_TARGET(micron_select_target)), /* M70A 4Gb 3.3V */ - SPINAND_INFO("MT29F4G01ABAFD", 0x34, + SPINAND_INFO("MT29F4G01ABAFD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x34), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -181,7 +187,8 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_ECCINFO(&micron_8_ooblayout, micron_8_ecc_get_status)), /* M70A 4Gb 1.8V */ - SPINAND_INFO("MT29F4G01ABBFD", 0x35, + SPINAND_INFO("MT29F4G01ABBFD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x35), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -191,7 +198,8 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_ECCINFO(&micron_8_ooblayout, micron_8_ecc_get_status)), /* M70A 8Gb 3.3V */ - SPINAND_INFO("MT29F8G01ADAFD", 0x46, + SPINAND_INFO("MT29F8G01ADAFD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x46), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 2), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -202,7 +210,8 @@ static const struct spinand_info micron_spinand_table[] = { micron_8_ecc_get_status), SPINAND_SELECT_TARGET(micron_select_target)), /* M70A 8Gb 1.8V */ - SPINAND_INFO("MT29F8G01ADBFD", 0x47, + SPINAND_INFO("MT29F8G01ADBFD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x47), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 2), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -214,26 +223,6 @@ static const struct spinand_info micron_spinand_table[] = { SPINAND_SELECT_TARGET(micron_select_target)), }; -static int micron_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Micron SPI NAND read ID need a dummy byte, - * so the first byte in raw_id is dummy. - */ - if (id[1] != SPINAND_MFR_MICRON) - return 0; - - ret = spinand_match_and_init(spinand, micron_spinand_table, - ARRAY_SIZE(micron_spinand_table), id[2]); - if (ret) - return ret; - - return 1; -} - static int micron_spinand_init(struct spinand_device *spinand) { /* @@ -248,12 +237,13 @@ static int micron_spinand_init(struct spinand_device *spinand) } static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = { - .detect = micron_spinand_detect, .init = micron_spinand_init, }; const struct spinand_manufacturer micron_spinand_manufacturer = { .id = SPINAND_MFR_MICRON, .name = "Micron", + .chips = micron_spinand_table, + .nchips = ARRAY_SIZE(micron_spinand_table), .ops = &micron_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c index c2cd3b426b3..e057b08c703 100644 --- a/drivers/mtd/nand/spi/toshiba.c +++ b/drivers/mtd/nand/spi/toshiba.c @@ -111,7 +111,8 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand, static const struct spinand_info toshiba_spinand_table[] = { /* 3.3V 1Gb (1st generation) */ - SPINAND_INFO("TC58CVG0S3HRAIG", 0xC2, + SPINAND_INFO("TC58CVG0S3HRAIG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xC2), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -121,7 +122,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 3.3V 2Gb (1st generation) */ - SPINAND_INFO("TC58CVG1S3HRAIG", 0xCB, + SPINAND_INFO("TC58CVG1S3HRAIG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xCB), NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -131,7 +133,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 3.3V 4Gb (1st generation) */ - SPINAND_INFO("TC58CVG2S0HRAIG", 0xCD, + SPINAND_INFO("TC58CVG2S0HRAIG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xCD), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -141,7 +144,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 1Gb (1st generation) */ - SPINAND_INFO("TC58CYG0S3HRAIG", 0xB2, + SPINAND_INFO("TC58CYG0S3HRAIG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xB2), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -151,7 +155,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 2Gb (1st generation) */ - SPINAND_INFO("TC58CYG1S3HRAIG", 0xBB, + SPINAND_INFO("TC58CYG1S3HRAIG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xBB), NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -161,7 +166,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 4Gb (1st generation) */ - SPINAND_INFO("TC58CYG2S0HRAIG", 0xBD, + SPINAND_INFO("TC58CYG2S0HRAIG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xBD), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -176,7 +182,8 @@ static const struct spinand_info toshiba_spinand_table[] = { * QE_BIT. */ /* 3.3V 1Gb (2nd generation) */ - SPINAND_INFO("TC58CVG0S3HRAIJ", 0xE2, + SPINAND_INFO("TC58CVG0S3HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE2), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -186,7 +193,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 3.3V 2Gb (2nd generation) */ - SPINAND_INFO("TC58CVG1S3HRAIJ", 0xEB, + SPINAND_INFO("TC58CVG1S3HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xEB), NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -196,7 +204,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 3.3V 4Gb (2nd generation) */ - SPINAND_INFO("TC58CVG2S0HRAIJ", 0xED, + SPINAND_INFO("TC58CVG2S0HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xED), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -206,7 +215,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 3.3V 8Gb (2nd generation) */ - SPINAND_INFO("TH58CVG3S0HRAIJ", 0xE4, + SPINAND_INFO("TH58CVG3S0HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4), NAND_MEMORG(1, 4096, 256, 64, 4096, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -216,7 +226,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 1Gb (2nd generation) */ - SPINAND_INFO("TC58CYG0S3HRAIJ", 0xD2, + SPINAND_INFO("TC58CYG0S3HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xD2), NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -226,7 +237,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 2Gb (2nd generation) */ - SPINAND_INFO("TC58CYG1S3HRAIJ", 0xDB, + SPINAND_INFO("TC58CYG1S3HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xDB), NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -236,7 +248,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 4Gb (2nd generation) */ - SPINAND_INFO("TC58CYG2S0HRAIJ", 0xDD, + SPINAND_INFO("TC58CYG2S0HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xDD), NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -246,7 +259,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout, tx58cxgxsxraix_ecc_get_status)), /* 1.8V 8Gb (2nd generation) */ - SPINAND_INFO("TH58CYG3S0HRAIJ", 0xD4, + SPINAND_INFO("TH58CYG3S0HRAIJ", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xD4), NAND_MEMORG(1, 4096, 256, 64, 4096, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -257,33 +271,13 @@ static const struct spinand_info toshiba_spinand_table[] = { tx58cxgxsxraix_ecc_get_status)), }; -static int toshiba_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Toshiba SPI NAND read ID needs a dummy byte, - * so the first byte in id is garbage. - */ - if (id[1] != SPINAND_MFR_TOSHIBA) - return 0; - - ret = spinand_match_and_init(spinand, toshiba_spinand_table, - ARRAY_SIZE(toshiba_spinand_table), - id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = { - .detect = toshiba_spinand_detect, }; const struct spinand_manufacturer toshiba_spinand_manufacturer = { .id = SPINAND_MFR_TOSHIBA, .name = "Toshiba", + .chips = toshiba_spinand_table, + .nchips = ARRAY_SIZE(toshiba_spinand_table), .ops = &toshiba_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index c119486efb7..66ed0a51d2f 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -79,7 +79,8 @@ static int w25m02gv_select_target(struct spinand_device *spinand, } static const struct spinand_info winbond_spinand_table[] = { - SPINAND_INFO("W25M02GV", 0xAB, + SPINAND_INFO("W25M02GV", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab), NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 2), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -88,7 +89,8 @@ static const struct spinand_info winbond_spinand_table[] = { 0, SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL), SPINAND_SELECT_TARGET(w25m02gv_select_target)), - SPINAND_INFO("W25N01GV", 0xAA, + SPINAND_INFO("W25N01GV", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa), NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -98,31 +100,6 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)), }; -/** - * winbond_spinand_detect - initialize device related part in spinand_device - * struct if it is a Winbond device. - * @spinand: SPI NAND device structure - */ -static int winbond_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Winbond SPI NAND read ID need a dummy byte, - * so the first byte in raw_id is dummy. - */ - if (id[1] != SPINAND_MFR_WINBOND) - return 0; - - ret = spinand_match_and_init(spinand, winbond_spinand_table, - ARRAY_SIZE(winbond_spinand_table), id[2]); - if (ret) - return ret; - - return 1; -} - static int winbond_spinand_init(struct spinand_device *spinand) { struct nand_device *nand = spinand_to_nand(spinand); @@ -142,12 +119,13 @@ static int winbond_spinand_init(struct spinand_device *spinand) } static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = { - .detect = winbond_spinand_detect, .init = winbond_spinand_init, }; const struct spinand_manufacturer winbond_spinand_manufacturer = { .id = SPINAND_MFR_WINBOND, .name = "Winbond", + .chips = winbond_spinand_table, + .nchips = ARRAY_SIZE(winbond_spinand_table), .ops = &winbond_spinand_manuf_ops, }; diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 15bcd59f341..1ae4dc6b15b 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -39,9 +39,9 @@ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPINAND_READID_OP(ndummy, buf, len) \ +#define SPINAND_READID_OP(naddr, ndummy, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1), \ - SPI_MEM_OP_NO_ADDR, \ + SPI_MEM_OP_ADDR(naddr, 0, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ SPI_MEM_OP_DATA_IN(len, buf, 1)) @@ -153,37 +153,46 @@ struct spinand_device; * @data: buffer containing the id bytes. Currently 4 bytes large, but can * be extended if required * @len: ID length - * - * struct_spinand_id->data contains all bytes returned after a READ_ID command, - * including dummy bytes if the chip does not emit ID bytes right after the - * READ_ID command. The responsibility to extract real ID bytes is left to - * struct_manufacurer_ops->detect(). */ struct spinand_id { u8 data[SPINAND_MAX_ID_LEN]; int len; }; +enum spinand_readid_method { + SPINAND_READID_METHOD_OPCODE, + SPINAND_READID_METHOD_OPCODE_ADDR, + SPINAND_READID_METHOD_OPCODE_DUMMY, +}; + +/** + * struct spinand_devid - SPI NAND device id structure + * @id: device id of current chip + * @len: number of bytes in device id + * @method: method to read chip id + * There are 3 possible variants: + * SPINAND_READID_METHOD_OPCODE: chip id is returned immediately + * after read_id opcode. + * SPINAND_READID_METHOD_OPCODE_ADDR: chip id is returned after + * read_id opcode + 1-byte address. + * SPINAND_READID_METHOD_OPCODE_DUMMY: chip id is returned after + * read_id opcode + 1 dummy byte. + */ +struct spinand_devid { + const u8 *id; + const u8 len; + const enum spinand_readid_method method; +}; + /** * struct manufacurer_ops - SPI NAND manufacturer specific operations - * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed - * the core calls the struct_manufacurer_ops->detect() hook of each - * registered manufacturer until one of them return 1. Note that - * the first thing to check in this hook is that the manufacturer ID - * in struct_spinand_device->id matches the manufacturer whose - * ->detect() hook has been called. Should return 1 if there's a - * match, 0 if the manufacturer ID does not match and a negative - * error code otherwise. When true is returned, the core assumes - * that properties of the NAND chip (spinand->base.memorg and - * spinand->base.eccreq) have been filled * @init: initialize a SPI NAND device * @cleanup: cleanup a SPI NAND device * * Each SPI NAND manufacturer driver should implement this interface so that - * NAND chips coming from this vendor can be detected and initialized properly. + * NAND chips coming from this vendor can be initialized properly. */ struct spinand_manufacturer_ops { - int (*detect)(struct spinand_device *spinand); int (*init)(struct spinand_device *spinand); void (*cleanup)(struct spinand_device *spinand); }; @@ -192,11 +201,16 @@ struct spinand_manufacturer_ops { * struct spinand_manufacturer - SPI NAND manufacturer instance * @id: manufacturer ID * @name: manufacturer name + * @devid_len: number of bytes in device ID + * @chips: supported SPI NANDs under current manufacturer + * @nchips: number of SPI NANDs available in chips array * @ops: manufacturer operations */ struct spinand_manufacturer { u8 id; char *name; + const struct spinand_info *chips; + const size_t nchips; const struct spinand_manufacturer_ops *ops; }; @@ -268,7 +282,7 @@ struct spinand_ecc_info { */ struct spinand_info { const char *model; - u8 devid; + struct spinand_devid devid; u32 flags; struct nand_memory_organization memorg; struct nand_ecc_req eccreq; @@ -282,6 +296,13 @@ struct spinand_info { unsigned int target); }; +#define SPINAND_ID(__method, ...) \ + { \ + .id = (const u8[]){ __VA_ARGS__ }, \ + .len = sizeof((u8[]){ __VA_ARGS__ }), \ + .method = __method, \ + } + #define SPINAND_INFO_OP_VARIANTS(__read, __write, __update) \ { \ .read_cache = __read, \ @@ -440,9 +461,10 @@ static inline void spinand_set_ofnode(struct spinand_device *spinand, } #endif /* __UBOOT__ */ -int spinand_match_and_init(struct spinand_device *dev, +int spinand_match_and_init(struct spinand_device *spinand, const struct spinand_info *table, - unsigned int table_size, u8 devid); + unsigned int table_size, + enum spinand_readid_method rdid_method); int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val); int spinand_select_target(struct spinand_device *spinand, unsigned int target); -- 2.39.0

6 21

[PATCH 0/3] USB OTG support for radxa cm3 IO board
by Manoj Sai 30 May '23

30 May '23

Patch 1/3 Enable usb otg nodes in device tree. Patch 2/3 Update dwc3_device register offset of rk3568. Patch 3/3 Enable Usb gadget and update the fastboot address in config. Manoj Sai (3): arm: dts: rockchip: rk3566: Enable USB OTG for Radxa CM3 rockchip: rk356x: update the dwc3_device register offset rk3566: radxa-cm3: Enable USB OTG arch/arm/dts/rk3566-radxa-cm3-io.dts | 8 ++++++++ arch/arm/mach-rockchip/board.c | 3 +++ configs/radxa-cm3-io-rk3566_defconfig | 3 +++ 3 files changed, 14 insertions(+) -- 2.25.1

4 12

[PATCH] imx: imx8mp: Add support for Polyhex Debix Model A SBC
by Gilles Talis 23 May '23

23 May '23

Add support for the Polyhex Debix Model A SBC board. It is an industrial grade single board computer based on NXP's i.MX 8M Plus. Currently supported interfaces are: - Serial console - Micro SD - eQOS and FEC Ethernet imx8mp-debix-model-a.dts is taken from Linux 6.3-rc6. Signed-off-by: Gilles Talis <gilles.talis(a)gmail.com> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mp-debix-model-a-u-boot.dtsi | 140 ++ arch/arm/dts/imx8mp-debix-model-a.dts | 507 +++++ arch/arm/mach-imx/imx8m/Kconfig | 8 + board/polyhex/imx8mp_debix_model_a/Kconfig | 15 + .../polyhex/imx8mp_debix_model_a/MAINTAINERS | 8 + board/polyhex/imx8mp_debix_model_a/Makefile | 12 + .../imx8mp_debix_model_a.c | 54 + .../imximage-8mp-lpddr4.cfg | 9 + .../imx8mp_debix_model_a/lpddr4_timing.c | 1843 +++++++++++++++++ board/polyhex/imx8mp_debix_model_a/spl.c | 129 ++ configs/imx8mp_debix_model_a_defconfig | 110 + include/configs/imx8mp_debix_model_a.h | 54 + 13 files changed, 2890 insertions(+) create mode 100644 arch/arm/dts/imx8mp-debix-model-a-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-debix-model-a.dts create mode 100644 board/polyhex/imx8mp_debix_model_a/Kconfig create mode 100644 board/polyhex/imx8mp_debix_model_a/MAINTAINERS create mode 100644 board/polyhex/imx8mp_debix_model_a/Makefile create mode 100644 board/polyhex/imx8mp_debix_model_a/imx8mp_debix_model_a.c create mode 100644 board/polyhex/imx8mp_debix_model_a/imximage-8mp-lpddr4.cfg create mode 100644 board/polyhex/imx8mp_debix_model_a/lpddr4_timing.c create mode 100644 board/polyhex/imx8mp_debix_model_a/spl.c create mode 100644 configs/imx8mp_debix_model_a_defconfig create mode 100644 include/configs/imx8mp_debix_model_a.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 337bee7e1e..5e1dd627d7 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -997,6 +997,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mq-phanbell.dtb \ imx8mp-beacon-kit.dtb \ imx8mp-data-modul-edm-sbc.dtb \ + imx8mp-debix-model-a.dtb \ imx8mp-dhcom-pdk2.dtb \ imx8mp-dhcom-pdk3.dtb \ imx8mp-evk.dtb \ diff --git a/arch/arm/dts/imx8mp-debix-model-a-u-boot.dtsi b/arch/arm/dts/imx8mp-debix-model-a-u-boot.dtsi new file mode 100644 index 0000000000..97c011895f --- /dev/null +++ b/arch/arm/dts/imx8mp-debix-model-a-u-boot.dtsi @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019, 2021 NXP + */ + +#include "imx8mp-u-boot.dtsi" + +/ { + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + bootph-pre-ram; + }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&crypto { + bootph-pre-ram; +}; + +&ethphy0 { + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + reset-delay-us = <15000>; + reset-post-delay-us = <100000>; +}; + +&fec { + phy-reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + phy-reset-duration = <15>; + phy-reset-post-delay = <100>; +}; + +&gpio1 { + bootph-pre-ram; +}; + +&gpio2 { + bootph-pre-ram; +}; + +&gpio3 { + bootph-pre-ram; +}; + +&gpio4 { + bootph-pre-ram; +}; + +&gpio5 { + bootph-pre-ram; +}; + +&i2c1 { + bootph-pre-ram; +}; + +&pinctrl_i2c1 { + bootph-pre-ram; +}; + +&pinctrl_pmic { + bootph-pre-ram; +}; + +&pinctrl_uart2 { + bootph-pre-ram; +}; + +&pinctrl_usdhc2_gpio { + bootph-pre-ram; +}; + +&pinctrl_usdhc2 { + bootph-pre-ram; +}; + +&pinctrl_usdhc3 { + bootph-pre-ram; +}; + +&pinctrl_wdog { + bootph-pre-ram; +}; + +&pmic { + bootph-pre-ram; + + regulators { + bootph-pre-ram; + }; +}; + +&reg_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + +&reg_usdhc2_vmmc { + bootph-pre-ram; +}; + +&uart2 { + bootph-pre-ram; +}; + +&sec_jr0 { + bootph-pre-ram; +}; + +&sec_jr1 { + bootph-pre-ram; +}; + +&sec_jr2 { + bootph-pre-ram; +}; + +&usdhc1 { + bootph-pre-ram; +}; + +&usdhc2 { + bootph-pre-ram; + sd-uhs-sdr104; + sd-uhs-ddr50; +}; + +&usdhc3 { + bootph-pre-ram; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&wdog1 { + bootph-pre-ram; +}; diff --git a/arch/arm/dts/imx8mp-debix-model-a.dts b/arch/arm/dts/imx8mp-debix-model-a.dts new file mode 100644 index 0000000000..58dae612b4 --- /dev/null +++ b/arch/arm/dts/imx8mp-debix-model-a.dts @@ -0,0 +1,507 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + * Copyright 2022 Ideas on Board Oy + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> + +#include "imx8mp.dtsi" + +/ { + model = "Polyhex Debix Model A i.MX8MPlus board"; + compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-connection-type = "rgmii-id"; + phy-handle = <&ethphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { /* RTL8211E */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <200000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +/* SD Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <&reg_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1f + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f + MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3 + MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; + diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index dc51f971d4..f6d7c3ca39 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -187,6 +187,13 @@ config TARGET_IMX8MP_BEACON select ARCH_MISC_INIT select SPL_CRYPTO if SPL +config TARGET_IMX8MP_DEBIX_MODEL_A + bool "Polyhex i.MX8M Plus Debix Model A SBC" + select BINMAN + select IMX8MP + select IMX8M_LPDDR4 + select SUPPORT_SPL + config TARGET_IMX8MP_DH_DHCOM_PDK2 bool "DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus" select BINMAN @@ -364,6 +371,7 @@ source "board/menlo/mx8menlo/Kconfig" source "board/msc/sm2s_imx8mp/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" +source "board/polyhex/imx8mp_debix_model_a/Kconfig" source "board/purism/librem5/Kconfig" source "board/ronetix/imx8mq-cm/Kconfig" source "board/technexion/pico-imx8mq/Kconfig" diff --git a/board/polyhex/imx8mp_debix_model_a/Kconfig b/board/polyhex/imx8mp_debix_model_a/Kconfig new file mode 100644 index 0000000000..3ebb6bc555 --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/Kconfig @@ -0,0 +1,15 @@ +if TARGET_IMX8MP_DEBIX_MODEL_A + +config SYS_BOARD + default "imx8mp_debix_model_a" + +config SYS_VENDOR + default "polyhex" + +config SYS_CONFIG_NAME + default "imx8mp_debix_model_a" + +config IMX_CONFIG + default "board/polyhex/imx8mp_debix_model_a/imximage-8mp-lpddr4.cfg" + +endif diff --git a/board/polyhex/imx8mp_debix_model_a/MAINTAINERS b/board/polyhex/imx8mp_debix_model_a/MAINTAINERS new file mode 100644 index 0000000000..d3afa91c11 --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/MAINTAINERS @@ -0,0 +1,8 @@ +DEBIX MODEL A BOARD (i.MX8M Plus) +M: Gilles Talis <gilles.talis(a)gmail.com> +S: Maintained +F: arch/arm/dts/imx8mp-debix-model-a.dts +F: arch/arm/dts/imx8mp-debix-model-a-u-boot.dtsi +F: board/polyhex/imx8mp_debix_model_a/ +F: include/configs/imx8mp_debix_model_a.h +F: configs/imx8mp_debix_model_a_defconfig diff --git a/board/polyhex/imx8mp_debix_model_a/Makefile b/board/polyhex/imx8mp_debix_model_a/Makefile new file mode 100644 index 0000000000..dffaccedb8 --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2019 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mp_debix_model_a.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif diff --git a/board/polyhex/imx8mp_debix_model_a/imx8mp_debix_model_a.c b/board/polyhex/imx8mp_debix_model_a/imx8mp_debix_model_a.c new file mode 100644 index 0000000000..ff73510ad6 --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/imx8mp_debix_model_a.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include <common.h> +#include <env.h> +#include <errno.h> +#include <init.h> +#include <miiphy.h> +#include <netdev.h> +#include <linux/delay.h> +#include <asm/global_data.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <asm/arch/imx8mp_pins.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +static void setup_fec(void) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + /* Enable RGMII TX clk output */ + setbits_le32(&gpr->gpr[1], BIT(22)); +} + +#if CONFIG_IS_ENABLED(NET) +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + return 0; +} +#endif + +int board_init(void) +{ + int ret = 0; + + if (IS_ENABLED(CONFIG_FEC_MXC)) + setup_fec(); + + return ret; +} + +int board_late_init(void) +{ + return 0; +} diff --git a/board/polyhex/imx8mp_debix_model_a/imximage-8mp-lpddr4.cfg b/board/polyhex/imx8mp_debix_model_a/imximage-8mp-lpddr4.cfg new file mode 100644 index 0000000000..6dedf1724a --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/imximage-8mp-lpddr4.cfg @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 NXP + */ + + +ROM_VERSION v2 +BOOT_FROM sd +LOADER u-boot-spl-ddr.bin 0x920000 diff --git a/board/polyhex/imx8mp_debix_model_a/lpddr4_timing.c b/board/polyhex/imx8mp_debix_model_a/lpddr4_timing.c new file mode 100644 index 0000000000..8f76aa3728 --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/lpddr4_timing.c @@ -0,0 +1,1843 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + { 0x3d400304, 0x1 }, + { 0x3d400030, 0x1 }, + { 0x3d400000, 0xa1080020 }, + { 0x3d400020, 0x1323 }, + { 0x3d400024, 0x1c61a00 }, + { 0x3d400064, 0x710105 }, + { 0x3d400070, 0x61027f10 }, + { 0x3d400074, 0x7b0 }, + { 0x3d4000d0, 0xc003071a }, + { 0x3d4000d4, 0xb70000 }, + { 0x3d4000dc, 0xe40036 }, + { 0x3d4000e0, 0x330000 }, + { 0x3d4000e8, 0x660048 }, + { 0x3d4000ec, 0x160048 }, + { 0x3d400100, 0x1e261f28 }, + { 0x3d400104, 0x7073b }, + { 0x3d40010c, 0xe0e000 }, + { 0x3d400110, 0x11040a11 }, + { 0x3d400114, 0x2050e0e }, + { 0x3d400118, 0x1010008 }, + { 0x3d40011c, 0x501 }, + { 0x3d400130, 0x20700 }, + { 0x3d400134, 0xe100002 }, + { 0x3d400138, 0x10c }, + { 0x3d400144, 0xba005d }, + { 0x3d400180, 0x3a2001c }, + { 0x3d400184, 0x2f07187 }, + { 0x3d400188, 0x0 }, + { 0x3d400190, 0x49b820c }, + { 0x3d400194, 0x80303 }, + { 0x3d4001b4, 0x1b0c }, + { 0x3d4001a0, 0xe0400018 }, + { 0x3d4001a4, 0xdf00e4 }, + { 0x3d4001a8, 0x80000000 }, + { 0x3d4001b0, 0x11 }, + { 0x3d4001c0, 0x1 }, + { 0x3d4001c4, 0x1 }, + { 0x3d4000f4, 0xc99 }, + { 0x3d400108, 0x810191a }, + { 0x3d400200, 0x1f }, + { 0x3d40020c, 0x0 }, + { 0x3d400210, 0x1f1f }, + { 0x3d400204, 0x80808 }, + { 0x3d400214, 0x7070707 }, + { 0x3d400218, 0x7070707 }, + { 0x3d40021c, 0xf0f }, + { 0x3d400250, 0x1705 }, + { 0x3d400254, 0x2c }, + { 0x3d40025c, 0x4000030 }, + { 0x3d400264, 0x900093e7 }, + { 0x3d40026c, 0x2005574 }, + { 0x3d400400, 0x111 }, + { 0x3d400404, 0x72ff }, + { 0x3d400408, 0x72ff }, + { 0x3d400494, 0x2100e07 }, + { 0x3d400498, 0x620096 }, + { 0x3d40049c, 0x1100e07 }, + { 0x3d4004a0, 0xc8012c }, + { 0x3d402020, 0x1021 }, + { 0x3d402024, 0x30d400 }, + { 0x3d402050, 0x20d000 }, + { 0x3d402064, 0xc001c }, + { 0x3d4020dc, 0x840000 }, + { 0x3d4020e0, 0x330000 }, + { 0x3d4020e8, 0x660048 }, + { 0x3d4020ec, 0x160048 }, + { 0x3d402100, 0xa040305 }, + { 0x3d402104, 0x30407 }, + { 0x3d402108, 0x203060b }, + { 0x3d40210c, 0x505000 }, + { 0x3d402110, 0x2040202 }, + { 0x3d402114, 0x2030202 }, + { 0x3d402118, 0x1010004 }, + { 0x3d40211c, 0x301 }, + { 0x3d402130, 0x20300 }, + { 0x3d402134, 0xa100002 }, + { 0x3d402138, 0x1d }, + { 0x3d402144, 0x14000a }, + { 0x3d402180, 0x640004 }, + { 0x3d402190, 0x3818200 }, + { 0x3d402194, 0x80303 }, + { 0x3d4021b4, 0x100 }, + { 0x3d4020f4, 0xc99 }, + { 0x3d403020, 0x1021 }, + { 0x3d403024, 0xc3500 }, + { 0x3d403050, 0x20d000 }, + { 0x3d403064, 0x30007 }, + { 0x3d4030dc, 0x840000 }, + { 0x3d4030e0, 0x330000 }, + { 0x3d4030e8, 0x660048 }, + { 0x3d4030ec, 0x160048 }, + { 0x3d403100, 0xa010102 }, + { 0x3d403104, 0x30404 }, + { 0x3d403108, 0x203060b }, + { 0x3d40310c, 0x505000 }, + { 0x3d403110, 0x2040202 }, + { 0x3d403114, 0x2030202 }, + { 0x3d403118, 0x1010004 }, + { 0x3d40311c, 0x301 }, + { 0x3d403130, 0x20300 }, + { 0x3d403134, 0xa100002 }, + { 0x3d403138, 0x8 }, + { 0x3d403144, 0x50003 }, + { 0x3d403180, 0x190004 }, + { 0x3d403190, 0x3818200 }, + { 0x3d403194, 0x80303 }, + { 0x3d4031b4, 0x100 }, + { 0x3d4030f4, 0xc99 }, + { 0x3d400028, 0x0 }, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param ddr_ddrphy_cfg[] = { + { 0x100a0, 0x0 }, + { 0x100a1, 0x1 }, + { 0x100a2, 0x2 }, + { 0x100a3, 0x3 }, + { 0x100a4, 0x4 }, + { 0x100a5, 0x5 }, + { 0x100a6, 0x6 }, + { 0x100a7, 0x7 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x1 }, + { 0x110a2, 0x3 }, + { 0x110a3, 0x4 }, + { 0x110a4, 0x5 }, + { 0x110a5, 0x2 }, + { 0x110a6, 0x7 }, + { 0x110a7, 0x6 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x1 }, + { 0x120a2, 0x3 }, + { 0x120a3, 0x2 }, + { 0x120a4, 0x5 }, + { 0x120a5, 0x4 }, + { 0x120a6, 0x7 }, + { 0x120a7, 0x6 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x1 }, + { 0x130a2, 0x2 }, + { 0x130a3, 0x3 }, + { 0x130a4, 0x4 }, + { 0x130a5, 0x5 }, + { 0x130a6, 0x6 }, + { 0x130a7, 0x7 }, + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + { 0x2002e, 0x2 }, + { 0x12002e, 0x2 }, + { 0x22002e, 0x2 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x20024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x120024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x220024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x20056, 0x3 }, + { 0x120056, 0x3 }, + { 0x220056, 0x3 }, + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + { 0x10049, 0xeba }, + { 0x10149, 0xeba }, + { 0x11049, 0xeba }, + { 0x11149, 0xeba }, + { 0x12049, 0xeba }, + { 0x12149, 0xeba }, + { 0x13049, 0xeba }, + { 0x13149, 0xeba }, + { 0x110049, 0xeba }, + { 0x110149, 0xeba }, + { 0x111049, 0xeba }, + { 0x111149, 0xeba }, + { 0x112049, 0xeba }, + { 0x112149, 0xeba }, + { 0x113049, 0xeba }, + { 0x113149, 0xeba }, + { 0x210049, 0xeba }, + { 0x210149, 0xeba }, + { 0x211049, 0xeba }, + { 0x211149, 0xeba }, + { 0x212049, 0xeba }, + { 0x212149, 0xeba }, + { 0x213049, 0xeba }, + { 0x213149, 0xeba }, + { 0x43, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x3a2 }, + { 0x120008, 0x64 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x660 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5665 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, + { 0x2007d, 0x212 }, + { 0x12007d, 0x212 }, + { 0x22007d, 0x212 }, + { 0x2007c, 0x61 }, + { 0x12007c, 0x61 }, + { 0x22007c, 0x61 }, + { 0x1004a, 0x500 }, + { 0x1104a, 0x500 }, + { 0x1204a, 0x500 }, + { 0x1304a, 0x500 }, + { 0x2002c, 0x0 }, +}; + +/* ddr phy trained csr */ +struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xe88 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x36e4 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x36e4 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0xe400 }, + { 0x54033, 0x3336 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0xe400 }, + { 0x54039, 0x3336 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3300 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3300 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3300 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3300 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xe88 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54012, 0x110 }, + { 0x54019, 0x36e4 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x36e4 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0xe400 }, + { 0x54033, 0x3336 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0xe400 }, + { 0x54039, 0x3336 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param ddr_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xb }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x633 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x633 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x633 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x633 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x633 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x633 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x633 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x633 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x633 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x633 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x633 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x633 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x633 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xb }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x1 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x625 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x625 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900a4, 0x0 }, + { 0x900a5, 0x790 }, + { 0x900a6, 0x11a }, + { 0x900a7, 0x8 }, + { 0x900a8, 0x7aa }, + { 0x900a9, 0x2a }, + { 0x900aa, 0x10 }, + { 0x900ab, 0x7b2 }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x0 }, + { 0x900ae, 0x7c8 }, + { 0x900af, 0x109 }, + { 0x900b0, 0x10 }, + { 0x900b1, 0x10 }, + { 0x900b2, 0x109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x2a8 }, + { 0x900b5, 0x129 }, + { 0x900b6, 0x8 }, + { 0x900b7, 0x370 }, + { 0x900b8, 0x129 }, + { 0x900b9, 0xa }, + { 0x900ba, 0x3c8 }, + { 0x900bb, 0x1a9 }, + { 0x900bc, 0xc }, + { 0x900bd, 0x408 }, + { 0x900be, 0x199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x790 }, + { 0x900c1, 0x11a }, + { 0x900c2, 0x8 }, + { 0x900c3, 0x4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0xe }, + { 0x900c6, 0x408 }, + { 0x900c7, 0x199 }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x790 }, + { 0x900cd, 0x16a }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x1d8 }, + { 0x900d0, 0x169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x788 }, + { 0x900d6, 0x16a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x1e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x798 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x7a0 }, + { 0x900df, 0x16a }, + { 0x900e0, 0x8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x168 }, + { 0x900e3, 0x8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x168 }, + { 0x900e6, 0xa }, + { 0x900e7, 0x408 }, + { 0x900e8, 0x169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0x0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0x0 }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x168 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x1e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x798 }, + { 0x900fa, 0x16a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x7a0 }, + { 0x900fd, 0x16a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x790 }, + { 0x90100, 0x16a }, + { 0x90101, 0x8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x168 }, + { 0x90104, 0x8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x168 }, + { 0x90107, 0xa }, + { 0x90108, 0x408 }, + { 0x90109, 0x169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0x0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0x0 }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x168 }, + { 0x90113, 0x1 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x168 }, + { 0x90116, 0x0 }, + { 0x90117, 0x1d8 }, + { 0x90118, 0x169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x790 }, + { 0x9011b, 0x16a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x7aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0xa }, + { 0x90120, 0x0 }, + { 0x90121, 0x1e9 }, + { 0x90122, 0x8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x108 }, + { 0x90125, 0xf }, + { 0x90126, 0x408 }, + { 0x90127, 0x169 }, + { 0x90128, 0xc }, + { 0x90129, 0x0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 0x9 }, + { 0x9012c, 0x0 }, + { 0x9012d, 0x1a9 }, + { 0x9012e, 0x0 }, + { 0x9012f, 0x408 }, + { 0x90130, 0x169 }, + { 0x90131, 0x0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x108 }, + { 0x90134, 0x8 }, + { 0x90135, 0x7aa }, + { 0x90136, 0x6a }, + { 0x90137, 0x0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x790 }, + { 0x9013c, 0x16a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0x0 }, + { 0x9013f, 0x68 }, + { 0x90140, 0x8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x168 }, + { 0x90143, 0xf }, + { 0x90144, 0x408 }, + { 0x90145, 0x169 }, + { 0x90146, 0xd }, + { 0x90147, 0x0 }, + { 0x90148, 0x68 }, + { 0x90149, 0x0 }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0x0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x168 }, + { 0x9014f, 0x8 }, + { 0x90150, 0x3c8 }, + { 0x90151, 0x1a9 }, + { 0x90152, 0x3 }, + { 0x90153, 0x370 }, + { 0x90154, 0x129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x2aa }, + { 0x90157, 0x9 }, + { 0x90158, 0x8 }, + { 0x90159, 0xe8 }, + { 0x9015a, 0x109 }, + { 0x9015b, 0x0 }, + { 0x9015c, 0x8140 }, + { 0x9015d, 0x10c }, + { 0x9015e, 0x10 }, + { 0x9015f, 0x8138 }, + { 0x90160, 0x104 }, + { 0x90161, 0x8 }, + { 0x90162, 0x448 }, + { 0x90163, 0x109 }, + { 0x90164, 0xf }, + { 0x90165, 0x7c0 }, + { 0x90166, 0x109 }, + { 0x90167, 0x0 }, + { 0x90168, 0xe8 }, + { 0x90169, 0x109 }, + { 0x9016a, 0x47 }, + { 0x9016b, 0x630 }, + { 0x9016c, 0x109 }, + { 0x9016d, 0x8 }, + { 0x9016e, 0x618 }, + { 0x9016f, 0x109 }, + { 0x90170, 0x8 }, + { 0x90171, 0xe0 }, + { 0x90172, 0x109 }, + { 0x90173, 0x0 }, + { 0x90174, 0x7c8 }, + { 0x90175, 0x109 }, + { 0x90176, 0x8 }, + { 0x90177, 0x8140 }, + { 0x90178, 0x10c }, + { 0x90179, 0x0 }, + { 0x9017a, 0x478 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x0 }, + { 0x9017d, 0x1 }, + { 0x9017e, 0x8 }, + { 0x9017f, 0x8 }, + { 0x90180, 0x4 }, + { 0x90181, 0x0 }, + { 0x90006, 0x8 }, + { 0x90007, 0x7c8 }, + { 0x90008, 0x109 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x400 }, + { 0x9000b, 0x106 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x29 }, + { 0x90026, 0x68 }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x200be, 0x3 }, + { 0x2000b, 0x74 }, + { 0x2000c, 0xe8 }, + { 0x2000d, 0x915 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0xc }, + { 0x12000c, 0x19 }, + { 0x12000d, 0xfa }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x2060 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x20089, 0x1 }, + { 0x20088, 0x19 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 } +}; + +struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 3732mts 1D */ + .drate = 3732, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 3732mts 2D */ + .drate = 3732, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 3732, 400, 100, }, +}; + diff --git a/board/polyhex/imx8mp_debix_model_a/spl.c b/board/polyhex/imx8mp_debix_model_a/spl.c new file mode 100644 index 0000000000..9b522e8d9c --- /dev/null +++ b/board/polyhex/imx8mp_debix_model_a/spl.c @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2018-2019, 2021 NXP + * Copyright 2023 Gilles Talis <gilles.talis(a)gmail.com> + * + */ + +#include <common.h> +#include <hang.h> +#include <init.h> +#include <log.h> +#include <spl.h> +#include <asm/global_data.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx8mp_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/arch/ddr.h> +#include <power/pmic.h> +#include <power/pca9450.h> +#include <dm/uclass.h> +#include <dm/device.h> + +DECLARE_GLOBAL_DATA_PTR; + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + return BOOT_DEVICE_BOOTROM; +} + +void spl_dram_init(void) +{ + ddr_init(&dram_timing); +} + +void spl_board_init(void) +{ + /* + * Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does + * not allow to change it. Should set the clock after PMIC + * setting done. Default is 400Mhz (system_pll1_800m with div = 2) + * set by ROM for ND VDD_SOC + */ + clock_enable(CCGR_GIC, 0); + clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(5)); + clock_enable(CCGR_GIC, 1); + + puts("Normal Boot\n"); +} + +static int power_init_board(void) +{ + struct udevice *dev; + int ret; + + ret = pmic_get("pmic@25", &dev); + if (ret == -ENODEV) { + puts("Failed to get PMIC\n"); + return 0; + } + if (ret != 0) + return ret; + + /* BUCKxOUT_DVS0/1 control BUCK123 output. */ + pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29); + + /* Increase VDD_SOC to typical value 0.95V before first DRAM access. */ + if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV)) + /* Set DVS0 to 0.85V for special case. */ + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14); + else + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1c); + + /* Set DVS1 to 0.85v for suspend. */ + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14); + + /* + * Enable DVS control through PMIC_STBY_REQ and + * set B1_ENMODE=1 (ON by PMIC_ON_REQ=H). + */ + pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59); + + /* + * Kernel uses OD/OD frequency for SoC. + * To avoid timing risk from SoC to ARM, + * increase VDD_ARM to OD voltage 0.95V + */ + pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1C); + + return 0; +} + +int board_fit_config_name_match(const char *name) +{ + if (is_imx8mp() && + !strcmp(name, "imx8mp-debix-model-a")) + return 0; + + return -1; +} + +void board_init_f(ulong dummy) +{ + int ret; + + arch_cpu_init(); + + init_uart_clk(1); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + preloader_console_init(); + + enable_tzc380(); + + power_init_board(); + + /* DDR initialization */ + spl_dram_init(); + + board_init_r(NULL, 0); +} diff --git a/configs/imx8mp_debix_model_a_defconfig b/configs/imx8mp_debix_model_a_defconfig new file mode 100644 index 0000000000..5de80233bd --- /dev/null +++ b/configs/imx8mp_debix_model_a_defconfig @@ -0,0 +1,110 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mp-debix-model-a" +CONFIG_SPL_TEXT_BASE=0x920000 +CONFIG_TARGET_IMX8MP_DEBIX_MODEL_A=y +CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_STACK=0x960000 +CONFIG_SPL=y +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 +CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_MONITOR_LEN=524288 +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_DEFAULT_FDT_FILE="imx8mp-debix-model-a.dtb" +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_BOOTROM_SUPPORT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 +CONFIG_SYS_BOOTM_LEN=0x2000000 +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=1 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_USE_ETHPRIME=y +CONFIG_ETHPRIME="eth1" +CONFIG_SPL_DM=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_CLK_IMX8MP=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_USDHC=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_IMX=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PCA9450=y +CONFIG_SPL_DM_PMIC_PCA9450=y +CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PCA9450=y +CONFIG_SPL_DM_REGULATOR_PCA9450=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPL_POWER_I2C=y +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_IMX_WATCHDOG=y diff --git a/include/configs/imx8mp_debix_model_a.h b/include/configs/imx8mp_debix_model_a.h new file mode 100644 index 0000000000..e82e8b16b1 --- /dev/null +++ b/include/configs/imx8mp_debix_model_a.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + * Copyright 2023 Gilles Talis <gilles.talis(a)gmail.com> + */ + +#ifndef __IMX8MP_DEBIX_MODEL_A_H +#define __IMX8MP_DEBIX_MODEL_A_H + +#include <linux/sizes.h> +#include <linux/stringify.h> +#include <asm/arch/imx-regs.h> + +#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +#if defined(CONFIG_CMD_NET) +#define CFG_FEC_MXC_PHYADDR 1 + +#define PHY_ANEG_TIMEOUT 20000 + +#endif + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) + +#include <config_distro_bootcmd.h> + +/* Initial environment variables */ +#define CFG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "image=Image\0" \ + "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \ + "fdt_addr_r=0x43000000\0" \ + "boot_fdt=try\0" \ + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "initrd_addr=0x43800000\0" \ + "bootm_size=0x10000000\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ + +/* Link Definitions */ + +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 + +/* 2GB DDR */ +#define CFG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0x80000000 /* 2 GB */ + +#endif -- 2.34.1

2 3

[PATCH 00/42] imx: i.MX9 update
by Peng Fan (OSS) 21 May '23

21 May '23

From: Peng Fan <peng.fan(a)nxp.com> This patchset includes updates mainly for i.MX9, such as Clock, Memory, Parts, Low drive mode, DDR, cpu driver, Variants The first patch is not about i.MX9, just include it here since it is a simple one for i.MX8ULP. For the watchdog reset_cpu, I will move it out from watchdog driver in future patches which would includes other changes. I include it here mainly for sysreset support. This patchset depends on two patches from Marek: https://patchwork.ozlabs.org/project/uboot/patch/20230404192510.160819-1-ma… https://patchwork.ozlabs.org/project/uboot/patch/20230404192510.160819-2-ma… Jacky Bai (4): ddr: imx9: Change the saved ddr data base to 0x2051c000 ddr: imx93: Add 625M bypass clock support ddr: imx93: update the ddr init to support mult setpoints ddr: imx9: update the rank setting for multi fsp support Peng Fan (33): imx8ulp: build ahab imx: spl_imx_romapi: typo fix imx: move imx8 sci header file to include/firmware/imx imx: firmware: sci: add inline functions when IMX8 not enabled imx: imx8_cpu: use static for local functions imx: imx8_cpu: support i.MX9 imx: imx8_cpu: support get temperature for i.MX9 imx: imx8_cpu: print cpu grade temperature imx9: configure M33 systick to 24M imx9: add more PLL settings imx9: use parameter freq when set_arm_clk imx9: correct getting LPI2C clk imx9: simplify clk settings imx9: cut off OPTEE memory region from U-Boot imx9: imx93_evk: enable CPU_IMX imx9: imx93_evk: drop unused macro imx9: imx93_evk: select IMX_TMU imx9: imx93_evk: enable CONFIG_WDT watchdog: ulp_wdog: guard reset_cpu with condition check imx9: soc: support reset cause imx9: Get market segment and speed grading imx9: clock: clear HW_CTRL_SEL imx9: clock: add CONFIG_IMX9_LOW_DRIVE_MODE support imx9: clock: config arm alt root to 500mhz imx9: add i.MX93 variants support imx9: correct coding style imx9: use i.MX generic rom api function imx9: imx93_evk: add low drive mode support on 11x11 EVK arm: dts: imx93: sync device tree with Linux arm: dts: imx93: add tmu imx9: imx93_evk: Update spl stack & bss base address imx9: imx93_evk: update ddr timing file imx9: imx93_evk: enable sysreset Ye Li (5): thermal: imx_tmu: Update TMU driver to support iMX93 imx9: Change hard coded MAC to read from fuse imx9: allow to bootaux Mcore with input address ddr: imx9: Add workaround for DDRPHY rank-to-rank errata imx9: Calculate DDR size from DDRC setting arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 29 - arch/arm/dts/imx93-11x11-evk.dts | 385 +- arch/arm/dts/imx93-pinfunc.h | 194 +- arch/arm/dts/imx93.dtsi | 618 +-- arch/arm/include/asm/arch-imx/cpu.h | 7 + arch/arm/include/asm/arch-imx8/power-domain.h | 2 +- arch/arm/include/asm/arch-imx8/sci/sci.h | 138 - arch/arm/include/asm/arch-imx8/sys_proto.h | 2 +- arch/arm/include/asm/arch-imx8m/ddr.h | 2 +- arch/arm/include/asm/arch-imx9/clock.h | 6 + arch/arm/include/asm/arch-imx9/ddr.h | 23 +- arch/arm/include/asm/arch-imx9/imx-regs.h | 3 + arch/arm/include/asm/mach-imx/sys_proto.h | 12 +- arch/arm/mach-imx/cmd_dek.c | 2 +- arch/arm/mach-imx/imx8/ahab.c | 2 +- arch/arm/mach-imx/imx8/cpu.c | 2 +- arch/arm/mach-imx/imx8/fdt.c | 2 +- arch/arm/mach-imx/imx8/iomux.c | 2 +- arch/arm/mach-imx/imx8/misc.c | 2 +- arch/arm/mach-imx/imx8/snvs_security_sc.c | 2 +- arch/arm/mach-imx/imx8ulp/Kconfig | 5 + arch/arm/mach-imx/imx8ulp/Makefile | 1 + arch/arm/mach-imx/imx9/Kconfig | 5 + arch/arm/mach-imx/imx9/clock.c | 113 +- arch/arm/mach-imx/imx9/imx_bootaux.c | 10 +- arch/arm/mach-imx/imx9/soc.c | 384 +- arch/arm/mach-imx/parse-container.c | 2 +- arch/arm/mach-imx/spl_imx_romapi.c | 2 +- .../imx8qm_rom7720_a1/imx8qm_rom7720_a1.c | 2 +- board/advantech/imx8qm_rom7720_a1/spl.c | 2 +- board/congatec/cgtqmx8/cgtqmx8.c | 2 +- board/freescale/imx8qm_mek/imx8qm_mek.c | 2 +- board/freescale/imx8qxp_mek/imx8qxp_mek.c | 2 +- board/freescale/imx8qxp_mek/spl.c | 2 +- board/freescale/imx93_evk/MAINTAINERS | 1 + board/freescale/imx93_evk/Makefile | 4 + board/freescale/imx93_evk/lpddr4x_timing.c | 3361 ++++++++++------- board/freescale/imx93_evk/lpddr4x_timing_ld.c | 1496 ++++++++ board/freescale/imx93_evk/spl.c | 26 +- board/siemens/capricorn/board.c | 2 +- board/toradex/apalis-imx8/apalis-imx8.c | 2 +- board/toradex/colibri-imx8x/colibri-imx8x.c | 2 +- configs/imx93_11x11_evk_defconfig | 12 +- configs/imx93_11x11_evk_ld_defconfig | 125 + drivers/clk/imx/clk-imx8.c | 2 +- drivers/clk/imx/clk-imx8qm.c | 2 +- drivers/clk/imx/clk-imx8qxp.c | 2 +- drivers/cpu/Kconfig | 6 + drivers/cpu/Makefile | 1 + drivers/cpu/imx8_cpu.c | 142 +- drivers/cpu/imx9_cpu.c | 224 ++ drivers/ddr/imx/imx9/Kconfig | 2 +- drivers/ddr/imx/imx9/ddr_init.c | 289 +- drivers/ddr/imx/phy/ddrphy_utils.c | 3 + drivers/ddr/imx/phy/helper.c | 5 +- drivers/misc/imx8/fuse.c | 2 +- drivers/misc/imx8/scu.c | 2 +- drivers/misc/imx8/scu_api.c | 2 +- drivers/pinctrl/nxp/pinctrl-scu.c | 2 +- .../power/domain/imx8-power-domain-legacy.c | 2 +- drivers/power/domain/imx8-power-domain.c | 2 +- drivers/thermal/Kconfig | 6 +- drivers/thermal/imx_scu_thermal.c | 2 +- drivers/thermal/imx_tmu.c | 101 + drivers/watchdog/ulp_wdog.c | 2 + include/configs/imx93_evk.h | 2 - include/dt-bindings/clock/imx93-clock.h | 17 +- include/dt-bindings/power/fsl,imx93-power.h | 15 + include/dt-bindings/power/imx93-power.h | 12 - .../firmware/imx}/sci/rpc.h | 0 include/firmware/imx/sci/sci.h | 379 ++ .../firmware/imx}/sci/svc/misc/api.h | 0 .../firmware/imx}/sci/svc/pad/api.h | 0 .../firmware/imx}/sci/svc/pm/api.h | 0 .../firmware/imx}/sci/svc/rm/api.h | 2 +- .../firmware/imx}/sci/svc/seco/api.h | 2 +- .../firmware/imx}/sci/types.h | 0 77 files changed, 5864 insertions(+), 2366 deletions(-) delete mode 100644 arch/arm/include/asm/arch-imx8/sci/sci.h create mode 100644 board/freescale/imx93_evk/lpddr4x_timing_ld.c create mode 100644 configs/imx93_11x11_evk_ld_defconfig create mode 100644 drivers/cpu/imx9_cpu.c create mode 100644 include/dt-bindings/power/fsl,imx93-power.h delete mode 100644 include/dt-bindings/power/imx93-power.h rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/rpc.h (100%) create mode 100644 include/firmware/imx/sci/sci.h rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/misc/api.h (100%) rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/pad/api.h (100%) rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/pm/api.h (100%) rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/rm/api.h (98%) rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/seco/api.h (96%) rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/types.h (100%) -- 2.40.0

5 86

[PATCH] ARM: imx: Fix parsing of ROM log event IDs on iMX8M
by fedorross＠gmail.com 21 May '23

21 May '23

From: Fedor Ross <fedor.ross(a)ifm.com> It seems like the ROM log events for the iMX8M are not fully covered by AN12853 i.MX ROMs Log Events, Rev. 0, May 2020. On iMX8M the ROM event ID 0x82 seems to use parameter0 which stops the parsing because the end of list is detected too early. This patch adds ROM event ID 0x82 and skips the next word if ID 0x82 is parsed. Fixes: a5ee05cf71 ("ARM: imx: Pick correct eMMC boot partition from ROM log") Signed-off-by: Fedor Ross <fedor.ross(a)ifm.com> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Marek Vasut <marex(a)denx.de> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/mach-imx/imx8m/soc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 8171631db1..4df57cb150 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -677,6 +677,7 @@ int spl_mmc_emmc_boot_partition(struct mmc *mmc) /* Log entries with 1 parameter, skip 1 */ case 0x80: /* Start to perform the device initialization */ case 0x81: /* The boot device initialization completes */ + case 0x82: /* Starts to execute boot device driver pre-config */ case 0x8f: /* The boot device initialization fails */ case 0x90: /* Start to read data from boot device */ case 0x91: /* Reading data from boot device completes */ -- 2.20.1

4 6

[PATCH 1/2] thermal: imx_tmu: Clean up all prints
by Marek Vasut 21 May '23

21 May '23

Use dev_(dev, ...) for all printing and debug logging, since this already includes the device name. Drop device name where duplicate. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-imx(a)nxp.com> Cc: Andrejs Cainikovs <andrejs.cainikovs(a)toradex.com> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Fedor Ross <fedor.ross(a)ifm.com> Cc: Marek Vasut <marex(a)denx.de> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Ye Li <ye.li(a)nxp.com> --- drivers/thermal/imx_tmu.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c index ca45abbb8e1..8d638797eb7 100644 --- a/drivers/thermal/imx_tmu.c +++ b/drivers/thermal/imx_tmu.c @@ -11,6 +11,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <dm.h> +#include <dm/device_compat.h> #include <dm/device-internal.h> #include <dm/device.h> #include <errno.h> @@ -185,8 +186,8 @@ int imx_tmu_get_temp(struct udevice *dev, int *temp) return ret; while (cpu_tmp >= pdata->alert) { - printf("CPU Temperature (%dC) has beyond alert (%dC), close to critical (%dC)", cpu_tmp, pdata->alert, pdata->critical); - puts(" waiting...\n"); + dev_info(dev, "CPU Temperature (%dC) has beyond alert (%dC), close to critical (%dC) waiting...\n", + cpu_tmp, pdata->alert, pdata->critical); mdelay(pdata->polling_delay); ret = read_temperature(dev, &cpu_tmp); if (ret) @@ -210,14 +211,14 @@ static int imx_tmu_calibration(struct udevice *dev) struct imx_tmu_plat *pdata = dev_get_plat(dev); ulong drv_data = dev_get_driver_data(dev); - debug("%s\n", __func__); + dev_dbg(dev, "%s\n", __func__); if (drv_data & (FLAGS_VER2 | FLAGS_VER3)) return 0; ret = dev_read_u32_array(dev, "fsl,tmu-range", range, 4); if (ret) { - printf("TMU: missing calibration range, ret = %d.\n", ret); + dev_err(dev, "TMU: missing calibration range, ret = %d.\n", ret); return ret; } @@ -229,7 +230,7 @@ static int imx_tmu_calibration(struct udevice *dev) calibration = dev_read_prop(dev, "fsl,tmu-calibration", &len); if (!calibration || len % 8) { - printf("TMU: invalid calibration data.\n"); + dev_err(dev, "TMU: invalid calibration data.\n"); return -ENODEV; } @@ -252,7 +253,7 @@ static void imx_tmu_init(struct udevice *dev) struct imx_tmu_plat *pdata = dev_get_plat(dev); ulong drv_data = dev_get_driver_data(dev); - debug("%s\n", __func__); + dev_dbg(dev, "%s\n", __func__); if (drv_data & FLAGS_VER3) { /* Disable monitoring */ @@ -287,7 +288,7 @@ static int imx_tmu_enable_msite(struct udevice *dev) ulong drv_data = dev_get_driver_data(dev); u32 reg; - debug("%s\n", __func__); + dev_dbg(dev, "%s\n", __func__); if (!pdata->regs) return -EIO; @@ -346,7 +347,7 @@ static int imx_tmu_bind(struct udevice *dev) const void *prop; int minc, maxc; - debug("%s dev name %s\n", __func__, dev->name); + dev_dbg(dev, "%s\n", __func__); prop = dev_read_prop(dev, "compatible", NULL); if (!prop) @@ -367,8 +368,7 @@ static int imx_tmu_bind(struct udevice *dev) dev->driver_data, offset, NULL); if (ret) - printf("Error binding driver '%s': %d\n", - dev->driver->name, ret); + dev_err(dev, "Error binding driver: %d\n", ret); } return 0; @@ -381,7 +381,7 @@ static int imx_tmu_parse_fdt(struct udevice *dev) ofnode trips_np; int ret; - debug("%s dev name %s\n", __func__, dev->name); + dev_dbg(dev, "%s\n", __func__); if (pdata->zone_node) { pdata->regs = (union tmu_regs *)dev_read_addr_ptr(dev); @@ -409,7 +409,7 @@ static int imx_tmu_parse_fdt(struct udevice *dev) else pdata->id = 0; - debug("args.args_count %d, id %d\n", args.args_count, pdata->id); + dev_dbg(dev, "args.args_count %d, id %d\n", args.args_count, pdata->id); pdata->polling_delay = dev_read_u32_default(dev, "polling-delay", 1000); @@ -428,8 +428,8 @@ static int imx_tmu_parse_fdt(struct udevice *dev) continue; } - debug("id %d polling_delay %d, critical %d, alert %d\n", - pdata->id, pdata->polling_delay, pdata->critical, pdata->alert); + dev_dbg(dev, "id %d polling_delay %d, critical %d, alert %d\n", + pdata->id, pdata->polling_delay, pdata->critical, pdata->alert); return 0; } @@ -441,7 +441,7 @@ static int imx_tmu_probe(struct udevice *dev) ret = imx_tmu_parse_fdt(dev); if (ret) { - printf("Error in parsing TMU FDT %d\n", ret); + dev_err(dev, "Error in parsing TMU FDT %d\n", ret); return ret; } -- 2.39.2

4 7

[PATCH v4] ARM: dts: imx7d-sdb-u-boot: Fix usdhc1 UHS operation
by Fabio Estevam 21 May '23

21 May '23

From: Fabio Estevam <festevam(a)denx.de> Commit 1a7904fdfa7d ("mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps") exposed the following SD card error: U-Boot 2023.04-00652-g487e42f7bc5e (Apr 05 2023 - 22:14:21 -0300) CPU: Freescale i.MX7D rev1.0 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 35C Reset cause: POR Model: Freescale i.MX7 SabreSD Board Board: i.MX7D SABRESD in non-secure mode DRAM: 1 GiB Core: 100 devices, 19 uclasses, devicetree: separate PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment The reason of the problem, as explained by Ye Li: "When UHS is enabled in defconfig, the usdhc1 node in imx7d-sdb.dts does not configure pad for VSELECT, also the data pad should be set to 100Mhz/200Mhz pin states." Apply these changes into u-boot.dtsi for now. When these changes reach the Linux mainline imx7d-sdb, they can be dropped from u-boot.dtsi. This fixes UHS mode on the imx7d-sdb board. Suggested-by: Ye Li <ye.li(a)nxp.com> Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- Changes since v3: - Fixed a typo on the pinctrl_usdhc1 node. arch/arm/dts/imx7d-sdb-u-boot.dtsi | 51 ++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/dts/imx7d-sdb-u-boot.dtsi b/arch/arm/dts/imx7d-sdb-u-boot.dtsi index b78358fa1397..913127b5e3c2 100644 --- a/arch/arm/dts/imx7d-sdb-u-boot.dtsi +++ b/arch/arm/dts/imx7d-sdb-u-boot.dtsi @@ -5,3 +5,54 @@ &usbotg1 { dr_mode = "peripheral"; }; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; +}; + +&pinctrl_usdhc1 { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; +}; + +&iomuxc { + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; +}; -- 2.34.1

3 2

commit 787f04bb6a - imx: add USB2_BOOT type
by Rasmus Villemoes 21 May '23

21 May '23

Hi Peng It seems that commit 787f04bb6a (imx: add USB2_BOOT type) broke our board logic which relies on whether get_boot_device() returns USB_BOOT or not. Instrumenting get_boot_device() shows that on our imx8mp board, boot_instance is 3 when we're booting over USB, so boot_dev becomes 20 instead of 17 aka USB_BOOT. I assume that for the boards/socs you mentioned in the commit message, boot_instance could be 0 or 1. However, I don't see anywhere that uses that USB2_BOOT define. Short-term, I'll probably just revert 787f04bb6a locally. A bit longer term, I'm thinking I should be doing rom_api_query_boot_infor() and "decoding" the return value myself. Is there any chance you could make some information on that ROM API public so it's possible for outsiders to understand what's going on? Rasmus

4 8

[PATCH v4 0/6] FWU: Add support for mtd backed feature on DeveloperBox
by jassisinghbrar＠gmail.com 19 May '23

19 May '23

From: Jassi Brar <jaswinder.singh(a)linaro.org> Introduce support for mtd backed storage for FWU feature and enable it on Synquacer platform based DeveloperBox. This revision is rebased onto patchset that trims the FWU api https://lore.kernel.org/u-boot/20230306231747.1888513-1-jassisinghbrar@gmai… Changes since v3: * Fix and Update documentation to also build optee for FWU FIP image. * Fixed checkpatch warnings * Made local functions static. * Split config changes to a separate patch * Fix authorship of three patches. Jassi Brar (3): dt: fwu: developerbox: enable fwu banks and mdata regions configs: move to new flash layout and boot flow fwu: DeveloperBox: add support for FWU Masami Hiramatsu (3): FWU: Add FWU metadata access driver for MTD storage regions FWU: mtd: Add helper functions for accessing FWU metadata tools: Add mkfwumdata tool for FWU metadata image .../synquacer-sc2a11-developerbox-u-boot.dtsi | 49 ++- board/socionext/developerbox/Makefile | 1 + board/socionext/developerbox/developerbox.c | 8 + board/socionext/developerbox/fwu_plat.c | 57 +++ configs/synquacer_developerbox_defconfig | 12 +- doc/board/socionext/developerbox.rst | 155 +++++++- drivers/fwu-mdata/Kconfig | 15 + drivers/fwu-mdata/Makefile | 1 + drivers/fwu-mdata/raw_mtd.c | 272 ++++++++++++++ include/configs/synquacer.h | 10 + include/fwu.h | 34 ++ lib/fwu_updates/Makefile | 1 + lib/fwu_updates/fwu_mtd.c | 164 +++++++++ tools/Kconfig | 9 + tools/Makefile | 4 + tools/mkfwumdata.c | 334 ++++++++++++++++++ 16 files changed, 1115 insertions(+), 11 deletions(-) create mode 100644 board/socionext/developerbox/fwu_plat.c create mode 100644 drivers/fwu-mdata/raw_mtd.c create mode 100644 lib/fwu_updates/fwu_mtd.c create mode 100644 tools/mkfwumdata.c -- 2.34.1

8 37