March 2023 - U-Boot

[PATCH v3] Let the EQoS in imx8mp handle fixed-phy too.
by Elmar Psilog 06 May '23

06 May '23

Without that patch it lost track to the node to scan speed and duplex. Patch was created by Marek Vasut, just tested by me. Signed-off-by: Elmar Psilog <epsi at gmx.de> Reviewed-by: Marek Vasut <marex at denx.de> --- changes v2: fix format issues changes v3: remove {} around single if, add reviewd.. drivers/net/dwc_eth_qos.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index 112deb546d..b9de205b8a 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -788,9 +788,21 @@ static int eqos_start(struct udevice *dev) */ if (!eqos->phy) { int addr = -1; - addr = eqos_get_phy_addr(eqos, dev); - eqos->phy = phy_connect(eqos->mii, addr, dev, - eqos->config->interface(dev)); + ofnode fixed_node; + + if (IS_ENABLED(CONFIG_PHY_FIXED)) { + fixed_node = ofnode_find_subnode(dev_ofnode(dev), + "fixed-link"); + if (ofnode_valid(fixed_node)) + eqos->phy = fixed_phy_create(dev_ofnode(dev)); + } + + if (!eqos->phy) { + addr = eqos_get_phy_addr(eqos, dev); + eqos->phy = phy_connect(eqos->mii, addr, dev, + eqos->config->interface(dev)); + } + if (!eqos->phy) { pr_err("phy_connect() failed"); goto err_stop_resets; -- 2.34.1

3 5

[PATCH 0/2] drivers: net: fsl-mc: fix MAC address fixup procedure
by Ioana Ciornei 06 May '23

06 May '23

This patch set fixes the MAC address fixup procedure which was impacted by several changes in the phy_interface_t used to describe some interfaces. The transitions from "xgmii" to "xfi" and then finally to "10gbase-r" were involved. The first patch just exports a function to identify the DPMAC id of an UCLASS_ETH device and the DPAA2 driver name as a macro. Ioana Ciornei (2): drivers: net: ldpaa: export driver name and API to get DPMAC id drivers: net: fsl-mc: fix MAC address fixup procedure drivers/net/fsl-mc/mc.c | 31 +++++++++++++------------------ drivers/net/ldpaa_eth/ldpaa_eth.c | 7 ++++--- include/net/ldpaa_eth.h | 15 +++++++++++++++ 3 files changed, 32 insertions(+), 21 deletions(-) create mode 100644 include/net/ldpaa_eth.h -- 2.25.1

3 6

[PATCH 1/3] net: ksz9477: remove unnecessary dsa_set_tagging call
by Tim Harvey 06 May '23

06 May '23

packet tagging is not used for this driver so we do not need to call dsa_set_tagging. Signed-off-by: Tim Harvey <tharvey(a)gateworks.com> --- drivers/net/ksz9477.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ksz9477.c b/drivers/net/ksz9477.c index fb5c76c600be..fecc394e0277 100644 --- a/drivers/net/ksz9477.c +++ b/drivers/net/ksz9477.c @@ -501,8 +501,6 @@ static int ksz_i2c_probe(struct udevice *dev) ksz_pwrite8(priv->dev, i, REG_PORT_MSTP_STATE, data8); } - dsa_set_tagging(dev, 0, 0); - return 0; }; -- 2.25.1

3 6

[PATCH v2] net: phy: gmii2rgmii: Support external rgmii-id phy
by Stefan Herbrechtsmeier 06 May '23

06 May '23

From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier(a)weidmueller.com> Read the phy mode of the external phy from the device tree if available and check that it is a RGMII variant. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier(a)weidmueller.com> --- Changes in v2: - Check that the external phy mode is a RGMII variant drivers/net/phy/xilinx_gmii2rgmii.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c index 7376283956..853a0df659 100644 --- a/drivers/net/phy/xilinx_gmii2rgmii.c +++ b/drivers/net/phy/xilinx_gmii2rgmii.c @@ -48,7 +48,14 @@ static int xilinxgmiitorgmii_config(struct phy_device *phydev) return -EINVAL; } - ext_phydev->interface = PHY_INTERFACE_MODE_RGMII; + ext_phydev->interface = ofnode_read_phy_mode(node); + if (ext_phydev->interface == PHY_INTERFACE_MODE_NA) { + ext_phydev->interface = PHY_INTERFACE_MODE_RGMII; + } else if (!phy_interface_is_rgmii(ext_phydev)) { + printf("Incorrect external interface type\n"); + return -EINVAL; + } + ext_phydev->node = phandle.node; phydev->priv = ext_phydev; -- 2.30.2

3 2

[PATCH] phy: realtek: don't duplicate genphy_startup
by Rasmus Villemoes 06 May '23

06 May '23

rtl8211e_startup() is an exact copy of genphy_startup(). Use that instead of duplicating it. Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> --- drivers/net/phy/realtek.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 24c3ea59bb..6c93771673 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -384,17 +384,6 @@ static int rtl8211x_startup(struct phy_device *phydev) return rtl8211x_parse_status(phydev); } -static int rtl8211e_startup(struct phy_device *phydev) -{ - int ret; - - ret = genphy_update_link(phydev); - if (ret) - return ret; - - return genphy_parse_link(phydev); -} - static int rtl8211f_startup(struct phy_device *phydev) { int ret; @@ -428,7 +417,7 @@ static struct phy_driver RTL8211E_driver = { .features = PHY_GBIT_FEATURES, .probe = &rtl8211e_probe, .config = &rtl8211e_config, - .startup = &rtl8211e_startup, + .startup = &genphy_startup, .shutdown = &genphy_shutdown, }; @@ -465,7 +454,7 @@ static struct phy_driver RTL8201F_driver = { .features = PHY_BASIC_FEATURES, .probe = &rtl8210f_probe, .config = &rtl8201f_config, - .startup = &rtl8211e_startup, + .startup = &genphy_startup, .shutdown = &genphy_shutdown, }; -- 2.37.2

2 1

[PATCH] phy: broadcom: don't duplicate genphy_startup
by Rasmus Villemoes 06 May '23

06 May '23

Functionally, bcm_cygnus_startup() is an exact copy of genphy_startup(). Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> --- drivers/net/phy/broadcom.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 566fcb8de7..5499ff12df 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -162,18 +162,6 @@ static int bcm5482_config(struct phy_device *phydev) return 0; } -static int bcm_cygnus_startup(struct phy_device *phydev) -{ - int ret; - - /* Read the Status (2x to make sure link is right) */ - ret = genphy_update_link(phydev); - if (ret) - return ret; - - return genphy_parse_link(phydev); -} - static void bcm_cygnus_afe(struct phy_device *phydev) { /* ensures smdspclk is enabled */ @@ -359,7 +347,7 @@ static struct phy_driver BCM_CYGNUS_driver = { .mask = 0xfffff0, .features = PHY_GBIT_FEATURES, .config = &bcm_cygnus_config, - .startup = &bcm_cygnus_startup, + .startup = &genphy_startup, .shutdown = &genphy_shutdown, }; -- 2.37.2

2 1

[PATCH] net: ipv6: IPv6 environment variable cleanup
by seanedmond＠linux.microsoft.com 06 May '23

06 May '23

From: Sean Edmond <seanedmond(a)microsoft.com> Fix "setenv gatewayip6". Synchronize IPv6 local variables with environment variables in netboot_update_env() Signed-off-by: Sean Edmond <seanedmond(a)microsoft.com> --- cmd/net.c | 23 ++++++++++++++++++++++- include/env_flags.h | 2 +- 2 files changed, 23 insertions(+), 2 deletions(-) diff --git a/cmd/net.c b/cmd/net.c index 88d53d14d5..0161c87529 100644 --- a/cmd/net.c +++ b/cmd/net.c @@ -208,7 +208,7 @@ U_BOOT_CMD( static void netboot_update_env(void) { - char tmp[22]; + char tmp[44]; if (net_gateway.s_addr) { ip_to_string(net_gateway, tmp); @@ -269,6 +269,27 @@ static void netboot_update_env(void) env_set("ntpserverip", tmp); } #endif + + if (IS_ENABLED(CONFIG_IPV6)) { + if (!ip6_is_unspecified_addr(&net_ip6) || + net_prefix_length != 0) { + sprintf(tmp, "%pI6c", &net_ip6); + if (net_prefix_length != 0) + sprintf(tmp, "%s/%d", tmp, net_prefix_length); + + env_set("ip6addr", tmp); + } + + if (!ip6_is_unspecified_addr(&net_server_ip6)) { + sprintf(tmp, "%pI6c", &net_server_ip6); + env_set("serverip6", tmp); + } + + if (!ip6_is_unspecified_addr(&net_gateway6)) { + sprintf(tmp, "%pI6c", &net_gateway6); + env_set("gatewayip6", tmp); + } + } } /** diff --git a/include/env_flags.h b/include/env_flags.h index 6bd574c2bd..7df40c59be 100644 --- a/include/env_flags.h +++ b/include/env_flags.h @@ -71,7 +71,7 @@ enum env_flags_varaccess { #define NET6_FLAGS \ "ip6addr:s," \ "serverip6:s," \ - "gatewayip6:s" + "gatewayip6:s," #else #define NET6_FLAGS #endif -- 2.39.0

5 4

[PATCH 1/4] net: e1000: add and make use of NUM_RX_DESC macro
by Christian Gmeiner 05 May '23

05 May '23

The call to DEFINE_ALIGN_BUFFER for the rx_desc array conained an icnonsistency as 16 receive descriptors were allocated when the remaining code would only use 8 of them. Signed-off-by: Christian Gmeiner <christian.gmeiner(a)gmail.com> --- drivers/net/e1000.c | 6 +++--- drivers/net/e1000.h | 2 ++ 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 41e6ba760e..8dccf29c7e 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -60,7 +60,7 @@ tested on both gig copper and gig fiber boards * move these buffers and the tx/rx pointers to struct e1000_hw. */ DEFINE_ALIGN_BUFFER(struct e1000_tx_desc, tx_base, 16, E1000_BUFFER_ALIGN); -DEFINE_ALIGN_BUFFER(struct e1000_rx_desc, rx_base, 16, E1000_BUFFER_ALIGN); +DEFINE_ALIGN_BUFFER(struct e1000_rx_desc, rx_base, NUM_RX_DESC, E1000_BUFFER_ALIGN); DEFINE_ALIGN_BUFFER(unsigned char, packet, 4096, E1000_BUFFER_ALIGN); static int tx_tail; @@ -5095,7 +5095,7 @@ fill_rx(struct e1000_hw *hw) rx_last = rx_tail; rd = rx_base + rx_tail; - rx_tail = (rx_tail + 1) % 8; + rx_tail = (rx_tail + 1) % NUM_RX_DESC; memset(rd, 0, 16); rd->buffer_addr = cpu_to_le64(virt_to_phys(packet)); @@ -5272,7 +5272,7 @@ e1000_configure_rx(struct e1000_hw *hw) E1000_WRITE_REG(hw, RDBAL, lower_32_bits(virt_to_phys(rx_base))); E1000_WRITE_REG(hw, RDBAH, upper_32_bits(virt_to_phys(rx_base))); - E1000_WRITE_REG(hw, RDLEN, 128); + E1000_WRITE_REG(hw, RDLEN, NUM_RX_DESC * sizeof(struct e1000_rx_desc)); /* Setup the HW Rx Head and Tail Descriptor Pointers */ E1000_WRITE_REG(hw, RDH, 0); diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index f788394da8..69882ba66f 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -42,6 +42,8 @@ #define DEBUGOUT(fmt, args...) do { } while (0) #endif +#define NUM_RX_DESC 8 + /* I/O wrapper functions */ #define E1000_WRITE_REG(a, reg, value) \ writel((value), ((a)->hw_addr + E1000_##reg)) -- 2.39.2

3 11

[PATCH] build_bug.h: Also define static_assert() when __CHECKER__ is defined
by Christophe Leroy 05 May '23

05 May '23

When doing a build with C=2, the following failure is encountered on several files: CHECK arch/powerpc/cpu/mpc8xxx/fsl_lbc.c arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: note: in included file (through arch/powerpc/include/asm/global_data.h, include/init.h): include/asm-generic/global_data.h:494:21: error: Expected ) in function declarator include/asm-generic/global_data.h:494:21: error: got ( And because of the error, the interesting part which are the warnings don't appear. This is because static_assert() is defined only when __CHECKER__ is not defined. Add a stub when __CHECKER__ is defined. With that fix, the expected warnings are now seen: CHECK arch/powerpc/cpu/mpc8xxx/fsl_lbc.c arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:32:27: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:32:27: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:32:27: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:32:45: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:32:45: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:32:45: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:35:24: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:35:24: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:35:24: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:35:40: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:35:40: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:35:40: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:67:17: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:67:17: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:67:17: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:68:17: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:68:17: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:68:17: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:72:17: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:72:17: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:72:17: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:73:17: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:73:17: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:73:17: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:78:9: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:78:9: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:78:9: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:79:9: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:79:9: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:79:9: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:131:22: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:131:22: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:131:22: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:132:49: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:132:49: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:132:49: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:144:26: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:144:26: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:144:26: got unsigned int [usertype] *mxmr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:144:41: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:144:41: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:144:41: got unsigned int [usertype] *mxmr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:145:27: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:145:27: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:145:27: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:146:32: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:146:32: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:146:32: got unsigned int * arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:149:39: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:149:39: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:149:39: got unsigned int [usertype] *mxmr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:155:18: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:155:18: expected unsigned int volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:155:18: got unsigned int [usertype] *mxmr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:155:33: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:155:33: expected unsigned int const volatile [noderef] <asn:2> *addr arch/powerpc/cpu/mpc8xxx/fsl_lbc.c:155:33: got unsigned int [usertype] *mxmr Signed-off-by: Christophe Leroy <christophe.leroy(a)csgroup.eu> --- CC: Masahiro Yamada <masahiroy(a)kernel.org> --- include/linux/build_bug.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/build_bug.h b/include/linux/build_bug.h index 9c7088bafa4..5a819961f15 100644 --- a/include/linux/build_bug.h +++ b/include/linux/build_bug.h @@ -12,6 +12,7 @@ #define BUILD_BUG_ON_MSG(cond, msg) (0) #define BUILD_BUG_ON(condition) (0) #define BUILD_BUG() (0) +#define static_assert(expr, ...) #else /* __CHECKER__ */ /* Force a compilation error if a constant expression is not a power of 2 */ -- 2.38.1

3 10

[PATCH v3 00/16] x86: Various minor enhancements for coreboot
by Simon Glass 04 May '23

04 May '23

This series includes some patches generated while getting U-Boot to boot more nicely on Brya, an Adler Lake Chromebook. This includes: - show the ACPI tables with 'acpi list' - get the UART to work even if coreboot doesn't enable it - show unimplemented sysinfo tags - fix for keyboard not working - fix for trying to set up PCI regions when the info is not available - fix for looking at inaccessible memory to find the sysinfo table Changes in v3: - Don't enable ACPI by default except on x86 and sandbox - Avoid a build error with the ASL compiler - Disable for coreboot64 since ACPI is not available Changes in v2: - Don't show an invalid CPU number on error - Update commit message with more detail - Update code comment to mention that addresses <1KB are ignored - Flush the buffer instead of skipping the reset - Add new patch to create a new Kconfig for ACPI - Add new patch to move acpi-table-finding functions into the library - Use tab instead of space in header file - Refactor two patches into one - Add new patch to allow locating the UART from ACPI tables - Expand commit message to explain this is for the debug UART - Update the defconfig instead - Drop patch 'usb: Quieten a debug message' since it was fixed elsewhere - Drop patch 'x86: coreboot: Use a memory-mapped UART' (not needed) - Add new patch to enable ms command - Move this patch to last in the series, so it can be dropped if needed Simon Glass (16): mtrr: Don't show an invalid CPU number x86: Adjust search range for sysinfo table input: Flush the keyboard buffer before resetting it acpi: Create a new Kconfig for ACPI acpi: Move the table-finding functions into the libary x86: coreboot: Collect the address of the ACPI tables x86: Allow locating the UART from ACPI tables pci: coreboot: Don't read regions when booting x86: coreboot: Use a memory-mapped UART x86: coreboot: Document how to enable the debug UART x86: coreboot: Scan PCI after relocation x86: coreboot: Log function names and line numbers x86: coreboot: Show unimplemented sysinfo tags x86: nvme: coreboot: Enable NVMe coreboot: Enable ms command x86: Allow locating UARTs by device ID arch/Kconfig | 2 + arch/x86/cpu/cpu.c | 4 +- arch/x86/dts/coreboot.dts | 4 + arch/x86/include/asm/cb_sysinfo.h | 8 ++ arch/x86/include/asm/coreboot_tables.h | 2 + arch/x86/lib/coreboot/cb_sysinfo.c | 13 +++ cmd/Kconfig | 2 +- cmd/acpi.c | 44 +------ cmd/x86/cbsysinfo.c | 9 ++ cmd/x86/mtrr.c | 6 +- configs/coreboot64_defconfig | 1 - configs/coreboot_defconfig | 10 +- doc/board/coreboot/coreboot.rst | 29 +++++ drivers/core/Kconfig | 1 + drivers/input/i8042.c | 19 +++ drivers/nvme/nvme_pci.c | 8 ++ drivers/pci/pci-uclass.c | 4 + drivers/serial/Kconfig | 10 ++ drivers/serial/serial_coreboot.c | 155 +++++++++++++++++++++++-- include/acpi/acpi_table.h | 8 ++ include/asm-generic/global_data.h | 4 +- include/pci_ids.h | 3 + lib/Kconfig | 10 +- lib/Makefile | 2 +- lib/acpi/Makefile | 6 + lib/acpi/acpi.c | 45 +++++++ 26 files changed, 351 insertions(+), 58 deletions(-) create mode 100644 lib/acpi/acpi.c -- 2.40.0.348.gf938b09366-goog

3 31