November 2023 - U-Boot

[PATCH v1] spi: spi-nor-ids: add flash model w25q01/02 support
by Jim Liu 14 Dec '23

14 Dec '23

add flash w25q01jv, w25q01jvfim and w25q02jv support Signed-off-by: Jim Liu <JJLIU0(a)nuvoton.com> --- drivers/mtd/spi/spi-nor-ids.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 4587215984..fd74efe609 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -512,6 +512,16 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + INFO("w25q01jvfim", 0xef7021, 0, 64 * 1024, 2048, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, + { + INFO("w25q02jv", 0xef7022, 0, 64 * 1024, 4096, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { INFO("w25q80", 0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { INFO("w25q80bl", 0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { INFO("w25q16cl", 0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -- 2.25.1

2 1

[PATCH] maintainers: rk3399: remove maintainer
by Shantur Rathore 14 Dec '23

14 Dec '23

Remove Akash Gajjar <akash(a)openedev.com> from MAINTAINERS as email is bouncing. Signed-off-by: Shantur Rathore <i(a)shantur.com> --- board/pine64/rockpro64_rk3399/MAINTAINERS | 1 - board/rockchip/evb_rk3399/MAINTAINERS | 1 - 2 files changed, 2 deletions(-) diff --git a/board/pine64/rockpro64_rk3399/MAINTAINERS b/board/pine64/rockpro64_rk3399/MAINTAINERS index 303db144aa..220ee21f23 100644 --- a/board/pine64/rockpro64_rk3399/MAINTAINERS +++ b/board/pine64/rockpro64_rk3399/MAINTAINERS @@ -1,5 +1,4 @@ ROCKPRO64 -M: Akash Gajjar <akash(a)openedev.com> M: Jagan Teki <jagan(a)amarulasolutions.com> S: Maintained F: board/pine64/rockpro64_rk3399 diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS index c7e412b54e..acdb840f20 100644 --- a/board/rockchip/evb_rk3399/MAINTAINERS +++ b/board/rockchip/evb_rk3399/MAINTAINERS @@ -93,7 +93,6 @@ F: configs/rock-4se-rk3399_defconfig F: arch/arm/dts/rk3399-rock-4se-u-boot.dtsi ROCK-PI-4 -M: Akash Gajjar <akash(a)openedev.com> M: Jagan Teki <jagan(a)amarulasolutions.com> S: Maintained F: configs/rock-pi-4-rk3399_defconfig -- 2.40.1

3 3

[PATCH] arm64: imx8mp: Enable TCP, IPv6, wget on Data Modul i.MX8M eDM SBC
by Marek Vasut 14 Dec '23

14 Dec '23

Enable support for TCP protocol, wget, and IPv6 on this platform. The former two allow users download payload into the U-Boot from a web server, which may be more convenient or easier to set up than TFTP server. The later is enabled to future proof the IP stack on this platform. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-imx(a)nxp.com> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Stefano Babic <sbabic(a)denx.de> --- configs/imx8mm_data_modul_edm_sbc_defconfig | 5 +++++ configs/imx8mp_data_modul_edm_sbc_defconfig | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index b015707ccec..3b76207227e 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -108,6 +108,9 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y +CONFIG_CMD_DHCP6=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_WGET=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_PXE=y @@ -148,6 +151,8 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_TSIZE=y +CONFIG_PROT_TCP_SACK=y +CONFIG_IPV6=y CONFIG_SPL_DM=y CONFIG_REGMAP=y CONFIG_SYSCON=y diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig index ae1a48c6812..7ee454076c6 100644 --- a/configs/imx8mp_data_modul_edm_sbc_defconfig +++ b/configs/imx8mp_data_modul_edm_sbc_defconfig @@ -114,6 +114,9 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y +CONFIG_CMD_DHCP6=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_WGET=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_PXE=y @@ -155,6 +158,8 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_TSIZE=y +CONFIG_PROT_TCP_SACK=y +CONFIG_IPV6=y CONFIG_SPL_DM=y CONFIG_REGMAP=y CONFIG_SYSCON=y -- 2.42.0

2 2

[PATCH 1/2] arm: imx6: Enable TCP, IPv6, wget on DH i.MX6 DHCOM
by Marek Vasut 14 Dec '23

14 Dec '23

Enable support for TCP protocol, wget, and IPv6 on this platform. The former two allow users download payload into the U-Boot from a web server, which may be more convenient or easier to set up than TFTP server. The later is enabled to future proof the IP stack on this platform. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-imx(a)nxp.com> Cc: Andreas Geisreiter <ageisreiter(a)dh-electronics.de> Cc: Christoph Niedermaier <cniedermaier(a)dh-electronics.com> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: u-boot(a)dh-electronics.com --- configs/dh_imx6_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 5a83b6a08a2..8d2d46ab659 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -55,6 +55,9 @@ CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_WDT=y +CONFIG_CMD_DHCP6=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_WGET=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y @@ -71,6 +74,10 @@ CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FEC" CONFIG_VERSION_VARIABLE=y CONFIG_ARP_TIMEOUT=200 +CONFIG_IP_DEFRAG=y +CONFIG_TFTP_TSIZE=y +CONFIG_PROT_TCP_SACK=y +CONFIG_IPV6=y CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y CONFIG_LBA48=y -- 2.42.0

2 5

[PATCH 1/1] pico-imx7d: add baseboard SD card boot detect
by egyszeregy＠freemail.hu 14 Dec '23

14 Dec '23

From: Benjamin Szőke <egyszeregy(a)freemail.hu> Technexion PICO-IMX7 SoM is supporting USDHC3 (eMMC or micro SD on SoM) and USDHC1 (SD on carrier board) to use on any carrier board like PICO-NYMPH. Based on the U-Boot version from Technexion it adds baseboard SD card boot detect to able to boot from selected USDHC1 or USDHC3 boot devices. - Add baseboard SD card boot detect from Technexion's U-Boot. - Implement board_mmc_get_env_dev() for pico-imx7d SoM. - Implement mmc_map_to_kernel_blk() for pico-imx7d SoM. - Add board_late_mmc_env_init() to use from common freescale functions to able to provide "mmcdev" and "mmcroot" variables in environment of U-boot. - Add "mmc1" alias to use for usdhc1 in imx7d-pico-pi-u-boot.dtsi. - In default environment set "mmcautodetect=yes" to use boot detection. Signed-off-by: Benjamin Szőke <egyszeregy(a)freemail.hu> --- arch/arm/dts/imx7d-pico-pi-u-boot.dtsi | 1 + board/technexion/pico-imx7d/Makefile | 2 +- board/technexion/pico-imx7d/pico-imx7d.c | 63 ++++++++++++++++ board/technexion/pico-imx7d/spl.c | 91 ++++++++++++++++++++++-- include/configs/pico-imx7d.h | 4 +- 5 files changed, 152 insertions(+), 9 deletions(-) diff --git a/arch/arm/dts/imx7d-pico-pi-u-boot.dtsi b/arch/arm/dts/imx7d-pico-pi-u-boot.dtsi index 843b4583e5..6289a76486 100644 --- a/arch/arm/dts/imx7d-pico-pi-u-boot.dtsi +++ b/arch/arm/dts/imx7d-pico-pi-u-boot.dtsi @@ -3,6 +3,7 @@ /{ aliases { mmc0 = &usdhc3; + mmc1 = &usdhc1; usb0 = &usbotg1; display0 = &lcdif; }; diff --git a/board/technexion/pico-imx7d/Makefile b/board/technexion/pico-imx7d/Makefile index 4ae3d606b5..61b55fcc55 100644 --- a/board/technexion/pico-imx7d/Makefile +++ b/board/technexion/pico-imx7d/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+ # (C) Copyright 2017 NXP Semiconductors -obj-y := pico-imx7d.o spl.o +obj-y := pico-imx7d.o spl.o ../../freescale/common/mmc.o diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 6e98b85b28..edd66ac7ac 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -13,6 +13,7 @@ #include <asm/global_data.h> #include <asm/gpio.h> #include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/boot_mode.h> #include <asm/io.h> #include <common.h> #include <miiphy.h> @@ -25,6 +26,11 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) +#define PICO_MMC0 0 +#define PICO_MMC0_BLK 2 +#define PICO_MMC1 1 +#define PICO_MMC1_BLK 0 + int dram_init(void) { gd->ram_size = imx_ddr_size(); @@ -176,6 +182,12 @@ int board_late_init(void) set_wdog_reset(wdog); +#if CONFIG_IS_ENABLED(FSL_ESDHC_IMX) +#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC) || CONFIG_IS_ENABLED(ENV_IS_NOWHERE) + board_late_mmc_env_init(); +#endif /* CONFIG_ENV_IS_IN_MMC or CONFIG_ENV_IS_NOWHERE */ +#endif + /* * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), * since we use PMIC_PWRON to reset the board. @@ -210,3 +222,54 @@ int board_ehci_hcd_init(int port) } return 0; } + +#if CONFIG_IS_ENABLED(FSL_ESDHC_IMX) +#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC) || CONFIG_IS_ENABLED(ENV_IS_NOWHERE) +int board_mmc_get_env_dev(int devno) +{ + int dev_env = 0; + (void)(devno); + + switch (get_boot_device()) { + case SD3_BOOT: + case MMC3_BOOT: + env_set("bootdev", "MMC3"); + dev_env = PICO_MMC0; + break; + case SD1_BOOT: + env_set("bootdev", "SD1"); + dev_env = PICO_MMC1; + break; + default: + printf("Wrong boot device!"); + } + + return dev_env; +} + +int mmc_map_to_kernel_blk(int dev_no) +{ + int blk_no = 0; + + switch (dev_no) { + case PICO_MMC0: + blk_no = PICO_MMC0_BLK; + break; + case PICO_MMC1: + blk_no = PICO_MMC1_BLK; + break; + default: + printf("Invalid MMC device!"); + } + + return blk_no; +} +#endif + +#if CONFIG_IS_ENABLED(ENV_IS_NOWHERE) +int mmc_get_env_dev(void) +{ + return board_mmc_get_env_dev(0); +} +#endif +#endif /* CONFIG_FSL_ESDHC_IMX */ diff --git a/board/technexion/pico-imx7d/spl.c b/board/technexion/pico-imx7d/spl.c index c6b21aaa42..0192eafbaa 100644 --- a/board/technexion/pico-imx7d/spl.c +++ b/board/technexion/pico-imx7d/spl.c @@ -15,6 +15,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch-mx7/mx7-ddr.h> #include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/boot_mode.h> #include <asm/gpio.h> #include <asm/sections.h> #include <fsl_esdhc_imx.h> @@ -159,7 +160,20 @@ void reset_cpu(void) #define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) -static iomux_v3_cfg_t const usdhc3_pads[] = { +#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) +/* EMMC/SD */ +static const iomux_v3_cfg_t usdhc1_pads[] = { + MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +#define USDHC3_CD_GPIO IMX_GPIO_NR(1, 14) +static const iomux_v3_cfg_t usdhc3_emmc_pads[] = { MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -173,20 +187,83 @@ static iomux_v3_cfg_t const usdhc3_pads[] = { MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -static struct fsl_esdhc_cfg usdhc_cfg[1] = { +static struct fsl_esdhc_cfg usdhc_cfg[2] = { {USDHC3_BASE_ADDR}, + {USDHC1_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) { - /* Assume uSDHC3 emmc is always present */ - return 1; + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + } + + return ret; } int board_mmc_init(struct bd_info *bis) { - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + int ret; + u32 index; + + /* + * Following map is done: + * (USDHC) (Physical Port) + * usdhc3 SOM MicroSD/MMC + * usdhc1 Carrier board MicroSD + * Always set boot USDHC as mmc0 + */ + + imx_iomux_v3_setup_multiple_pads(usdhc3_emmc_pads, + ARRAY_SIZE(usdhc3_emmc_pads)); + gpio_direction_input(USDHC3_CD_GPIO); + + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + gpio_direction_input(USDHC1_CD_GPIO); + + switch (get_boot_device()) { + case SD1_BOOT: + usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + usdhc_cfg[0].max_bus_width = 4; + usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].max_bus_width = 4; + break; + case MMC3_BOOT: + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 8; + usdhc_cfg[1].esdhc_base = USDHC1_BASE_ADDR; + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + usdhc_cfg[1].max_bus_width = 4; + break; + case SD3_BOOT: + default: + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + usdhc_cfg[1].esdhc_base = USDHC1_BASE_ADDR; + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + usdhc_cfg[1].max_bus_width = 4; + break; + } + + for (index = 0; index < CFG_SYS_FSL_USDHC_NUM; ++index) { + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + if (ret) + return ret; + } + + return 0; } #endif diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index 096e5bbe66..e7a8cb20df 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -13,7 +13,7 @@ #define CFG_MXC_UART_BASE UART5_IPS_BASE_ADDR /* MMC Config */ -#define CFG_SYS_FSL_ESDHC_ADDR 0 +#define CFG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR #define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=" \ @@ -79,9 +79,11 @@ "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ "fastboot_partition_alias_system=rootfs\0" \ "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ + "mmcautodetect=yes\0" \ PICO_BOOT_ENV #define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ -- 2.42.0.windows.2

5 18

[PATCH v2] arm: mxs: Clear CPSR V bit to activate low vectors
by Marek Vasut 14 Dec '23

14 Dec '23

The MXS starts with CPSR V bit set, which makes the CPU jump to high vectors in case of an exception. Those high vectors are located at 0xffff0000, which is where the BootROM exception table is located as well. U-Boot should handle exceptions on its own using its own exception handling code, which is located at 0x0, i.e. at low vectors. Clear the CPSR V bit, so that the CPU would jump to low vectors on exception instead, and therefore run the U-Boot exception handling code. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-imx(a)nxp.com> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Lukasz Majewski <lukma(a)denx.de> Cc: Stefano Babic <sbabic(a)denx.de> --- V2: Mark both get_cr()/set_cr() callsites as __attribute__((target("arm"))) and noinline to force generation of ARM version of those functions, as this core cannot run mrc/mcr in Thumb mode. This is truly hideous workaround right here. --- arch/arm/cpu/arm926ejs/mxs/mxs.c | 4 ++++ arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +++++++- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index 6d6166cb839..4f3cb63c56d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -71,6 +71,7 @@ void reset_cpu(void) * actually 0x20, this the associated <destination address>. Loading the PC * register with an address performs a jump to that address. */ +noinline __attribute__((target("arm"))) void mx28_fixup_vt(uint32_t start_addr) { /* ldr pc, [pc, #0x18] */ @@ -85,6 +86,9 @@ void mx28_fixup_vt(uint32_t start_addr) /* cppcheck-suppress nullPointer */ vt[i + 8] = start_addr + (4 * i); } + + /* Make sure ARM core points to low vectors */ + set_cr(get_cr() & ~CR_V); } #ifdef CONFIG_ARCH_MISC_INIT diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 5e7bdb78be1..249f8de8fbe 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -17,6 +17,7 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/sections.h> +#include <asm/system.h> #include <linux/compiler.h> #include "mxs_init.h" @@ -93,7 +94,9 @@ static uint8_t mxs_get_bootmode_index(void) return i; } -static void mxs_spl_fixup_vectors(void) +static noinline +__attribute__((target("arm"))) +void mxs_spl_fixup_vectors(void) { /* * Copy our vector table to 0x0, since due to HAB, we cannot @@ -104,6 +107,9 @@ static void mxs_spl_fixup_vectors(void) /* cppcheck-suppress nullPointer */ memcpy(0x0, _start, 0x60); + + /* Make sure ARM core points to low vectors */ + set_cr(get_cr() & ~CR_V); } static void mxs_spl_console_init(void) -- 2.42.0

2 2

[PATCH] MAINTAINERS: Fix ARCH_APPLE file paths
by Moritz Fischer 14 Dec '23

14 Dec '23

Fixes a filepath in MAINTAINERS file that wasn't updated when renaming the files to match the new SoC name. Fixes: a4bd5e4120d6 ('arm: apple: Change SoC name from "m1" into "apple"') Signed-off-by: Moritz Fischer <moritzf(a)google.com> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7c1cb2dc4d..833f7beb9a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -117,7 +117,7 @@ F: drivers/mmc/snps_dw_mmc.c APPLE M1 SOC SUPPORT M: Mark Kettenis <kettenis(a)openbsd.org> S: Maintained -F: arch/arm/include/asm/arch-m1/ +F: arch/arm/include/asm/arch-apple/ F: arch/arm/mach-apple/ F: configs/apple_m1_defconfig F: drivers/iommu/apple_dart.c -- 2.43.0.rc1.413.gea7ed67945-goog

2 1

[PATCH] drivers: misc: Kconfig: Fix SPL_FS_LOADER prompt
by Alexander Gendin 14 Dec '23

14 Dec '23

Both FS_LOADER and SPL_FS_LOADER have the same menu prompt. To avoid confusion, make prompt for SPL_FS_LOADER different. Signed-off-by: Alexander Gendin <agendin(a)matrox.com> --- drivers/misc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 97057de8bf..ed7ecedd3a 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -615,7 +615,7 @@ config FS_LOADER ie. the FPGA device. config SPL_FS_LOADER - bool "Enable loader driver for file system" + bool "Enable loader driver for file system in SPL" depends on SPL help This is file system generic loader which can be used to load -- 2.41.0

3 2

[PATCH] lib/Kconfig: Correct typo about SYSINFO_SMBIOS in help message
by Tom Rini 14 Dec '23

14 Dec '23

The correct symbol to enable to have SMBIOS populate fields based on the device tree is SYSINFO_SMBIOS and not SMBIOS_SYSINFO. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- lib/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig b/lib/Kconfig index 19649517a39b..d47df6bb1cfa 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -995,7 +995,7 @@ config GENERATE_SMBIOS_TABLE Check http://www.dmtf.org/standards/smbios for details. - See also SMBIOS_SYSINFO which allows SMBIOS values to be provided in + See also SYSINFO_SMBIOS which allows SMBIOS values to be provided in the devicetree. endmenu -- 2.34.1

2 2

[PATCH] binman: doc: fix typo
by Dario Binacchi 13 Dec '23

13 Dec '23

s/use set/set/ Signed-off-by: Dario Binacchi <dario.binacchi(a)amarulasolutions.com> --- tools/binman/binman.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index 020988d955f0..230e055667f3 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -2060,7 +2060,7 @@ don't have access to the blobs. If the blobs are in a different directory, you can specify this with the `-I` option. -For U-Boot, you can use set the BINMAN_INDIRS environment variable to provide a +For U-Boot, you can set the BINMAN_INDIRS environment variable to provide a space-separated list of directories to search for binary blobs:: BINMAN_INDIRS="odroid-c4/fip/g12a \ -- 2.42.0

3 2