October 2023 - U-Boot

[PATCH v2 1/2] dt-bindings: leds: import common led bindings from linux v6.5
by Tom Fitzhenry 23 Oct '23

23 Oct '23

This brings in more colours, e.g. ORANGE needed for the QuartzPro64 DT. Linux commits: 472d7b9e8141 ("dt-bindings: leds: Expand LED_COLOR_ID definitions") Signed-off-by: Tom Fitzhenry <tom(a)tom-fitzhenry.me.uk> --- include/dt-bindings/leds/common.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h index 3be89a7c20a..9a0d33d027f 100644 --- a/include/dt-bindings/leds/common.h +++ b/include/dt-bindings/leds/common.h @@ -33,7 +33,12 @@ #define LED_COLOR_ID_MULTI 8 /* For multicolor LEDs */ #define LED_COLOR_ID_RGB 9 /* For multicolor LEDs that can do arbitrary color, so this would include RGBW and similar */ -#define LED_COLOR_ID_MAX 10 +#define LED_COLOR_ID_PURPLE 10 +#define LED_COLOR_ID_ORANGE 11 +#define LED_COLOR_ID_PINK 12 +#define LED_COLOR_ID_CYAN 13 +#define LED_COLOR_ID_LIME 14 +#define LED_COLOR_ID_MAX 15 /* Standard LED functions */ /* Keyboard LEDs, usually it would be input4::capslock etc. */ -- 2.42.0

2 1

[PATCH 0/3] rockchip: Add Xunlong Orange Pi 5 and 5 Plus boards
by Jonas Karlman 23 Oct '23

23 Oct '23

This series add support for Xunlong Orange Pi 5 and 5 Plus boards. First patch add support for the SPI NOR Flash used on the two boards. Second patch add support for the Xunlong Orange Pi 5 RK3588S board. Third patch add support for the Xunlong Orange Pi 5 Plus RK3588 board. This series depends on the following series for a clean apply: - rockchip: rk3588: Sync pcie and usb3 nodes from linux [1] - board: rockchip: add FriendlyElec NanoPC-T6 rk3588 board [2] [1] https://patchwork.ozlabs.org/cover/1850311/ [2] https://patchwork.ozlabs.org/patch/1847842/ Jonas Karlman (2): board: rockchip: Add Xunlong Orange Pi 5 board: rockchip: Add Xunlong Orange Pi 5 Plus Ricardo Pardini (1): mtd: spi-nor: Add support for XMC XM25QU128C arch/arm/dts/Makefile | 2 + .../dts/rk3588-orangepi-5-plus-u-boot.dtsi | 27 + arch/arm/dts/rk3588-orangepi-5-plus.dts | 848 ++++++++++++++++++ arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi | 22 + arch/arm/dts/rk3588s-orangepi-5.dts | 662 ++++++++++++++ board/rockchip/evb_rk3588/MAINTAINERS | 14 + configs/orangepi-5-plus-rk3588_defconfig | 105 +++ configs/orangepi-5-rk3588s_defconfig | 102 +++ doc/board/rockchip/rockchip.rst | 2 + drivers/mtd/spi/spi-nor-ids.c | 1 + 10 files changed, 1785 insertions(+) create mode 100644 arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588-orangepi-5-plus.dts create mode 100644 arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-orangepi-5.dts create mode 100644 configs/orangepi-5-plus-rk3588_defconfig create mode 100644 configs/orangepi-5-rk3588s_defconfig -- 2.42.0

2 6

[PATCH v2 0/4] rockchip: rk3588: Sync pcie and usb3 nodes from linux
by Jonas Karlman 23 Oct '23

23 Oct '23

This series sync rk3588 device tree nodes from latest mainline linux maintainer tree and also update usb3 nodes with latest submitted patches. Patch 1 sync latest device tree from latest linux maintainer tree to move pcie and spi flash nodes away from -u-boot.dtsi files. Patch 2 enable usb 2.0 support on rk3588-rock-5a. Patch 3 fully enable pcie and ahci/sata support on rk3588-rock-5b. Patch 4 sync usb3 nodes with latest pending patches in order to drop use of rockchip,rk3399-dwc3 compatible. Changes in v2: - Sync device tree from linux v6.7-rockchip-dts64-1 tag - Add patch to enable usb 2.0 support on rk3588-rock-5a - Use rockchip,rk3568-dwc3 compatible so that dwc3-generic driver change can be submitted in a separate series - Collect r-b tags Jonas Karlman (4): rockchip: rk3588: Sync device tree from v6.7-rockchip-dts64-1 tag rockchip: rk3588-rock-5a: Enable support for USB 2.0 ports rockchip: rk3588-rock-5b: Enable support for PCIe SATA cards rockchip: rk3588-rock-5b: Sync USB3 nodes from mainline linux patches arch/arm/dts/rk3588-evb1-v10-u-boot.dtsi | 11 +- arch/arm/dts/rk3588-evb1-v10.dts | 136 +++++++++++++++ arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 204 +++++------------------ arch/arm/dts/rk3588-rock-5b.dts | 145 ++++++++++++++++ arch/arm/dts/rk3588-u-boot.dtsi | 40 ++--- arch/arm/dts/rk3588s-pinctrl.dtsi | 44 +++++ arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi | 4 - arch/arm/dts/rk3588s-u-boot.dtsi | 78 +++++---- arch/arm/dts/rk3588s.dtsi | 24 +++ configs/rock5a-rk3588s_defconfig | 16 +- configs/rock5b-rk3588_defconfig | 7 +- 11 files changed, 467 insertions(+), 242 deletions(-) -- 2.42.0

2 6

[PATCH v5 0/8] Add rkmtd command
by Johan Jonker 23 Oct '23

23 Oct '23

The command rkmtd creates a virtual block device to transfer Rockchip boot block data to and from NAND with block orientated tools like "ums" and "rockusb". It uses the Rockchip MTD driver to scan for boot blocks and copies data from the first block in a GPT formatted virtual disk. Data must be written in U-boot "idbloader.img" format and start at partition "loader1" offset 64. The data header is parsed for length and offset. When the last sector is received it erases up to 5 erase blocks on NAND and writes boot blocks in a pattern depending on the NAND ID. Data is then verified. When a block turns out bad the block header is discarded. Changed V5: Add bounce buffer flag Use devres_alloc in bind Restyle Changed V4: Sort includes Replace constant by define Enable rkmtd command in sandbox defconfig Fix minor things in test Changed V3: Add documetation Add test Split driver from command Split header Use devm_kzalloc Remove out of memory debug Restyle Changed V2: Rename to rkmtd Johan Jonker (8): mtd: nand: raw: rockchip_nfc: add NAND_SKIP_BBTSCAN option rockchip: dm: prepare rkmtd UCLASS rockchip: block: add rkmtd class and drivers rockchip: block: blk-uclass: add bounce buffer flag to blk_desc rockchip: cmd: add rkmtd command rockchip: test: dm: add rkmtd test rockchip: doc: add rkmtd.rst rockchip: configs: sandbox: enable rkmtd command cmd/Kconfig | 8 + cmd/Makefile | 1 + cmd/rkmtd.c | 204 +++++ configs/sandbox64_defconfig | 1 + configs/sandbox_defconfig | 1 + disk/part.c | 4 + doc/board/rockchip/index.rst | 1 + doc/board/rockchip/rkmtd.rst | 105 +++ drivers/block/Kconfig | 7 + drivers/block/Makefile | 2 + drivers/block/blk-uclass.c | 5 +- drivers/block/rkmtd.c | 1152 +++++++++++++++++++++++++++ drivers/mtd/nand/raw/Kconfig | 9 + drivers/mtd/nand/raw/rockchip_nfc.c | 3 + drivers/scsi/scsi.c | 4 + include/blk.h | 1 + include/dm/uclass-id.h | 1 + include/rkmtd.h | 191 +++++ test/dm/Makefile | 1 + test/dm/rkmtd.c | 200 +++++ 20 files changed, 1899 insertions(+), 2 deletions(-) create mode 100644 cmd/rkmtd.c create mode 100644 doc/board/rockchip/rkmtd.rst create mode 100644 drivers/block/rkmtd.c create mode 100644 include/rkmtd.h create mode 100644 test/dm/rkmtd.c -- 2.39.2

3 11

[PATCH v3 0/2] Enable split mode in binman
by Neha Malcom Francis 23 Oct '23

23 Oct '23

This series extends the functionality of ti-secure-rom entry type in binman to support enabling of split mode vs. the default lockstep mode via changing the field in the x509 certificate. A DONOTMERGE patch is added to give an example of how this can be done via the binman.dtsi Changes in v3: - Simon - added entries.rst change - updated function comments - removed inconsistency in setting bootcore_opts to 32 Changes in v2: - Udit: - included TRM link in commit message - added DONOTMERGE patch showing example Neha Malcom Francis (2): binman: openssl: x509: ti_secure_rom: Add support for bootcore_opts DONOTMERGE: arm: dts: k3-j7200-binman: Enable split mode for MCU R5 arch/arm/dts/k3-j7200-binman.dtsi | 3 +++ tools/binman/btool/openssl.py | 6 ++++-- tools/binman/entries.rst | 1 + tools/binman/etype/ti_secure_rom.py | 11 +++++++++-- tools/binman/etype/x509_cert.py | 3 ++- tools/binman/test/297_ti_secure_rom.dts | 1 + 6 files changed, 20 insertions(+), 5 deletions(-) -- 2.34.1

2 9

[PATCH 1/1] efi_loader: fix efi_dp_from_eth
by Heinrich Schuchardt 23 Oct '23

23 Oct '23

When compiling the sandbox with CONFIG_LTO=n, CONFIG_NET=n an error is reported: /usr/bin/ld: lib/efi_loader/efi_device_path.o: in function `efi_dp_from_eth': lib/efi_loader/efi_device_path.c:985:(.text+0xcf4): undefined reference to `eth_get_dev' Add a missing configuration check. As the function is exported __maybe_unused can be removed. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- lib/efi_loader/efi_device_path.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c index ed7214f3a3..f3a0e855b3 100644 --- a/lib/efi_loader/efi_device_path.c +++ b/lib/efi_loader/efi_device_path.c @@ -977,11 +977,14 @@ struct efi_device_path *efi_dp_from_uart(void) return buf; } -struct efi_device_path __maybe_unused *efi_dp_from_eth(void) +struct efi_device_path *efi_dp_from_eth(void) { void *buf, *start; unsigned dpsize = 0; + if (!IS_ENABLED(CONFIG_NETDEVICES)) + return NULL; + assert(eth_get_dev()); dpsize += dp_size(eth_get_dev()); -- 2.40.1

3 2

[PATCH v2 00/22] sunxi: Allwinner T113s support
by Andre Przywara 23 Oct '23

23 Oct '23

Hi, this is an update to the Allwinner T113s support series. It addresses some comments I got (many thanks to the reviewers!). Samuel had a mishap where his email client ate his draft responses, so the put the gist of his review comments in an IRC query. Most of the GPIO changes in this series were triggered by his comments, many thanks! The biggest change is that all low-level GPIO/pinctrl routines now live in the GPIO driver file under drivers/gpio, that's a better place than under board/sunxi. Also the GPIO header file saw some cleanup, many definition are not (longer) needed outside of sunxi_gpio.c. Based on origin/next. For a detailed changelog, see below. =================== This series adds support for the new SoC series that covers the Allwinner D1 siblings R528 and T113s (a version with co-packaged DRAM). They all share the same die, although the D1 and D1s use RISC-V cores, which requires more plumbing, to use the sunxi code across two architectures. Getting the R528 support in should help a bit in sorting out what's new peripheral code and what is architecture dependent. IIUC, Samuel has that running, although with some hacks, the number of which this series tries to reduce. The most interesting part of this is the pincontroller rework, this tackles two issues: - For the first time in the history of mainline Allwinner support the pincontroller changed the register layout. The code here tries to abstract the differences away, so both variants can share the code peacefully. - For the above mentioned reason, the pincontroller code is quite old, and is mostly spread out across arch/arm, in a pre-DM style, even though we have real DM support in U-Boot proper. We need the non-DM version for the (ARM-only?) legacy SPL, so can't get rid of that completely. This series also tries to modernise that code, and moves it into drivers/gpio, where it can be more easily shared with RISC-V. The main feature is then of course the T113s support, of which the new pinctroller is only one part. Apart from the new pincontroller and the usual new SoC bits (like clock and pinmux support), this includes the DRAM controller code. With the basics in, we add support for the MangoPi MQ-R board, which uses the T113s and seems to be a popular board. This should also serve as a blueprint for supporting similar boards. The DTs are copied from the kernel (as usual). There are some bits missing, prominently PSCI support. There is a series out there, which just needs some smaller fixes in some places. I expect the PSCI support to go back-to-back with this series. This series is based on top of current origin/next, so that should cover some chunks of the v2024.01 merge window already. A branch is available at: https://source.denx.de/u-boot/custodians/u-boot-sunxi.git t113s-v2 Please have a look, review and test. Cheers, Andre Changelog v2 .. v1: - add review and test tags - reorder pinctrl rework patches: first move shared code, then add in/out, then remove struct, then move headers - move all GPIO routines into drivers/gpio/sunxi_gpio.c - move private GPIO definitions from GPIO header file to sunxi_gpio.c - use GPIO_NUM() instead of "% 32" directly - define more MMIO addresses (PRCM, CPUCFG, R_PIO) - do not enable 8-bit eMMC mode (Okhunjon) - add eMMC pins to SPL pinmux setup (Okhunjon) - drop patch [PATCH 13/20] sunxi: clock: h6: prepare for PRCM less SoCs - update DT files from latest Linux kernel tree - fix pin numbers for the UART pinmux setup - let DRAM driver depend on ARCH_SUNXI Andre Przywara (19): sunxi: remove CONFIG_SATAPWR net: sunxi_emac: chase DT nodes to find PHY regulator sunxi: remove CONFIG_MACPWR pinctrl: sunxi: move pinctrl code pinctrl: sunxi: add GPIO in/out wrappers pinctrl: sunxi: remove struct sunxi_gpio pinctrl: sunxi: remove GPIO_EXTRA_HEADER pinctrl: sunxi: move PIO_BASE into sunxi_gpio.h pinctrl: sunxi: add new D1 pinctrl support sunxi: introduce NCAT2 generation model pinctrl: sunxi: add Allwinner D1 pinctrl description sunxi: clock: D1/R528: Enable PLL LDO during PLL1 setup sunxi: clock: support D1/R528 PLL6 clock Kconfig: sunxi: prepare for using drivers/ram/sunxi sunxi: add R528/T113-s3/D1(s) DRAM initialisation code sunxi: add Allwinner R528/T113 SoC support sunxi: refactor serial base addresses to avoid asm/arch/cpu.h ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi sunxi: add MangoPi MQ-R board support Okhunjon Sobirjonov (1): sunxi: R528: add SMHC2 pin pull ups support Samuel Holland (2): clk: sunxi: Add support for the D1 CCU riscv: dts: allwinner: Add the D1/D1s SoC devicetree arch/arm/Kconfig | 3 +- arch/arm/cpu/armv7/sunxi/sram.c | 1 + arch/arm/cpu/armv8/fel_utils.S | 1 + arch/arm/dts/Makefile | 2 + .../arm/dts/sun8i-t113s-mangopi-mq-r-t113.dts | 35 + arch/arm/dts/sun8i-t113s.dtsi | 59 + arch/arm/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi | 126 ++ arch/arm/dts/sunxi-u-boot.dtsi | 7 + arch/arm/include/asm/arch-sunxi/boot0.h | 2 + arch/arm/include/asm/arch-sunxi/clock.h | 3 +- .../include/asm/arch-sunxi/clock_sun50i_h6.h | 12 +- arch/arm/include/asm/arch-sunxi/cpu.h | 2 + arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 17 - .../include/asm/arch-sunxi/cpu_sun50i_h6.h | 7 - arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 9 - .../include/asm/arch-sunxi/cpu_sunxi_ncat2.h | 39 + arch/arm/include/asm/arch-sunxi/mmc.h | 2 +- arch/arm/include/asm/arch-sunxi/prcm.h | 2 +- arch/arm/include/asm/arch-sunxi/serial.h | 32 + arch/arm/include/asm/arch-sunxi/timer.h | 2 +- arch/arm/mach-sunxi/Kconfig | 44 +- arch/arm/mach-sunxi/Makefile | 2 +- arch/arm/mach-sunxi/board.c | 31 +- arch/arm/mach-sunxi/clock_sun50i_h6.c | 45 +- arch/arm/mach-sunxi/cpu_info.c | 2 + arch/arm/mach-sunxi/dram_suniv.c | 2 +- arch/arm/mach-sunxi/gtbus_sun9i.c | 1 + arch/arm/mach-sunxi/pinmux.c | 78 - arch/arm/mach-sunxi/spl_spi_sunxi.c | 1 + arch/arm/mach-sunxi/timer.c | 1 + arch/riscv/dts/sun20i-common-regulators.dtsi | 28 + arch/riscv/dts/sun20i-d1.dtsi | 66 + arch/riscv/dts/sun20i-d1s.dtsi | 76 + arch/riscv/dts/sunxi-d1-t113.dtsi | 15 + arch/riscv/dts/sunxi-d1s-t113.dtsi | 927 +++++++++++ board/sunxi/board.c | 34 +- board/sunxi/chip.c | 2 +- common/spl/Kconfig | 3 +- configs/A10-OLinuXino-Lime_defconfig | 1 - configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 - configs/A20-OLinuXino-Lime2_defconfig | 1 - configs/A20-OLinuXino-Lime_defconfig | 1 - configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 - configs/A20-OLinuXino_MICRO_defconfig | 1 - configs/A20-Olimex-SOM-EVB_defconfig | 1 - configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 - configs/A20-Olimex-SOM204-EVB_defconfig | 1 - configs/Bananapi_M2_Ultra_defconfig | 1 - configs/Bananapi_defconfig | 1 - configs/Bananapro_defconfig | 1 - configs/Cubieboard2_defconfig | 1 - configs/Cubieboard_defconfig | 1 - configs/Cubietruck_defconfig | 1 - configs/Itead_Ibox_A20_defconfig | 1 - configs/Lamobo_R1_defconfig | 2 - configs/Linksprite_pcDuino3_Nano_defconfig | 1 - configs/Linksprite_pcDuino3_defconfig | 1 - configs/Mele_A1000_defconfig | 1 - configs/Orangepi_defconfig | 1 - configs/Orangepi_mini_defconfig | 1 - configs/Sinovoip_BPI_M3_defconfig | 1 - configs/bananapi_m1_plus_defconfig | 1 - configs/bananapi_m2_plus_h3_defconfig | 1 - configs/bananapi_m2_plus_h5_defconfig | 1 - configs/i12-tvbox_defconfig | 1 - configs/jesurun_q5_defconfig | 1 - configs/mangopi_mq_r_defconfig | 15 + configs/mixtile_loftq_defconfig | 1 - configs/nanopi_m1_plus_defconfig | 1 - configs/nanopi_neo_plus2_defconfig | 1 - configs/nanopi_r1s_h5_defconfig | 1 - configs/orangepi_pc2_defconfig | 1 - configs/orangepi_plus2e_defconfig | 1 - configs/orangepi_plus_defconfig | 3 +- configs/orangepi_win_defconfig | 1 - configs/pine_h64_defconfig | 1 - configs/zeropi_defconfig | 1 - drivers/Makefile | 1 + drivers/ata/ahci_sunxi.c | 9 + drivers/clk/sunxi/Kconfig | 7 + drivers/clk/sunxi/Makefile | 1 + drivers/clk/sunxi/clk_d1.c | 84 + drivers/clk/sunxi/clk_sunxi.c | 5 + drivers/gpio/axp_gpio.c | 1 + drivers/gpio/sunxi_gpio.c | 189 ++- drivers/i2c/mvtwsi.c | 3 +- drivers/i2c/sun6i_p2wi.c | 2 +- drivers/i2c/sun8i_rsb.c | 2 +- drivers/mmc/sunxi_mmc.c | 9 +- drivers/net/sun8i_emac.c | 9 +- drivers/net/sunxi_emac.c | 39 + drivers/pinctrl/sunxi/Kconfig | 5 + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 43 +- drivers/ram/Kconfig | 3 +- drivers/ram/Makefile | 3 + drivers/ram/sunxi/Kconfig | 73 + drivers/ram/sunxi/Makefile | 4 + drivers/ram/sunxi/dram_sun20i_d1.c | 1432 +++++++++++++++++ drivers/ram/sunxi/dram_sun20i_d1.h | 73 + drivers/video/hitachi_tx18d42vm_lcd.c | 1 + drivers/video/ssd2828.c | 1 - drivers/video/sunxi/sunxi_display.c | 1 + drivers/video/sunxi/sunxi_lcd.c | 1 + include/configs/sunxi-common.h | 2 +- include/dt-bindings/clock/sun20i-d1-ccu.h | 158 ++ include/dt-bindings/clock/sun20i-d1-r-ccu.h | 19 + include/dt-bindings/reset/sun20i-d1-ccu.h | 79 + include/dt-bindings/reset/sun20i-d1-r-ccu.h | 16 + .../arch-sunxi/gpio.h => include/sunxi_gpio.h | 83 +- 109 files changed, 3809 insertions(+), 326 deletions(-) create mode 100644 arch/arm/dts/sun8i-t113s-mangopi-mq-r-t113.dts create mode 100644 arch/arm/dts/sun8i-t113s.dtsi create mode 100644 arch/arm/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi create mode 100644 arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h create mode 100644 arch/arm/include/asm/arch-sunxi/serial.h delete mode 100644 arch/arm/mach-sunxi/pinmux.c create mode 100644 arch/riscv/dts/sun20i-common-regulators.dtsi create mode 100644 arch/riscv/dts/sun20i-d1.dtsi create mode 100644 arch/riscv/dts/sun20i-d1s.dtsi create mode 100644 arch/riscv/dts/sunxi-d1-t113.dtsi create mode 100644 arch/riscv/dts/sunxi-d1s-t113.dtsi create mode 100644 configs/mangopi_mq_r_defconfig create mode 100644 drivers/clk/sunxi/clk_d1.c create mode 100644 drivers/ram/sunxi/Kconfig create mode 100644 drivers/ram/sunxi/Makefile create mode 100644 drivers/ram/sunxi/dram_sun20i_d1.c create mode 100644 drivers/ram/sunxi/dram_sun20i_d1.h create mode 100644 include/dt-bindings/clock/sun20i-d1-ccu.h create mode 100644 include/dt-bindings/clock/sun20i-d1-r-ccu.h create mode 100644 include/dt-bindings/reset/sun20i-d1-ccu.h create mode 100644 include/dt-bindings/reset/sun20i-d1-r-ccu.h rename arch/arm/include/asm/arch-sunxi/gpio.h => include/sunxi_gpio.h (75%) -- 2.35.8

2 42

[PATCH 1/1] sandbox: eliminate unused functions from binaries
by Heinrich Schuchardt 23 Oct '23

23 Oct '23

The sandbox should closely mimic other architectures. Place each function or data in a separate section and let the linker eliminate unused ones. This will reduce the binary size. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- arch/sandbox/config.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 2d184c5f65..c02f0229c2 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -2,7 +2,7 @@ # Copyright (c) 2011 The Chromium OS Authors. PLATFORM_CPPFLAGS += -D__SANDBOX__ -U_FORTIFY_SOURCE -PLATFORM_CPPFLAGS += -fPIC +PLATFORM_CPPFLAGS += -fPIC -ffunction-sections -fdata-sections PLATFORM_LIBS += -lrt SDL_CONFIG ?= sdl2-config @@ -26,6 +26,7 @@ cmd_u-boot__ = $(CC) -o $@ -Wl,-T u-boot.lds $(u-boot-init) \ $(KBUILD_LDFLAGS:%=-Wl,%) \ $(SANITIZERS) \ $(LTO_FINAL_LDFLAGS) \ + -Wl,--gc-section \ -Wl,--whole-archive \ $(u-boot-main) \ $(u-boot-keep-syms-lto) \ @@ -37,6 +38,7 @@ cmd_u-boot-spl = (cd $(obj) && $(CC) -o $(SPL_BIN) -Wl,-T u-boot-spl.lds \ $(SANITIZERS) \ $(LTO_FINAL_LDFLAGS) \ $(patsubst $(obj)/%,%,$(u-boot-spl-init)) \ + -Wl,--gc-section \ -Wl,--whole-archive \ $(patsubst $(obj)/%,%,$(u-boot-spl-main)) \ $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \ -- 2.40.1

1 1

When do we merge bug fixes and new functionality
by Tony Dinh 22 Oct '23

22 Oct '23

Hi Tom, Simon, Stefan, I have a few people waiting for these patches to get merged. So I hope you don't mind (I'm not sure about the merging schedule), I'd bug you guys about these patches. Wondering if these will be in v2024.01-rc1 or subsequence rc? bootstd: sata: bootdev scanning for ahci sata with no drive attached https://patchwork.ozlabs.org/project/uboot/patch/20231007033429.25109-1-mib… bootstd: use ARCH_DMA_MINALIGN in memalign() when allocating memory https://patchwork.ozlabs.org/project/uboot/patch/20230919212722.16216-1-mib… bootstd: sata: Add bootstd support for ahci sata https://patchwork.ozlabs.org/project/uboot/patch/20230917230649.30357-1-mib… arm: mvebu: Enable bootstd for Synology DS116 board https://patchwork.ozlabs.org/project/uboot/patch/20231007213548.20276-1-mib… arm: mvebu: Enable bootstd for Thecus N2350 board https://patchwork.ozlabs.org/project/uboot/patch/20231007220814.30783-1-mib… arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev https://patchwork.ozlabs.org/project/uboot/patch/20230906052242.21568-1-mib… arm: kirkwood: Add support for ZyXEL NSA325 board https://patchwork.ozlabs.org/project/uboot/patch/20230826033330.7827-1-mibo… arm: kirkwood: Pogo v4: Enable LTO https://patchwork.ozlabs.org/project/uboot/patch/20230824190713.30866-1-mib… All the best, Tony

1 1

[PATCH] iot2050: Allow for more than 1 USB storage device
by Jan Kiszka 22 Oct '23

22 Oct '23

From: Jan Kiszka <jan.kiszka(a)siemens.com> This was lost via 53873974a4b0 while some users of the IOT2050 expect it to work: Make sure that up to 3 USB storage devices are probed. Signed-off-by: Jan Kiszka <jan.kiszka(a)siemens.com> --- include/configs/iot2050.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h index 4968722d18f..1d444d02c83 100644 --- a/include/configs/iot2050.h +++ b/include/configs/iot2050.h @@ -15,6 +15,15 @@ #include <configs/ti_armv7_common.h> +/* allow up to 3 USB storage devcies */ +#ifdef CONFIG_CMD_USB +#undef BOOT_TARGET_USB +#define BOOT_TARGET_USB(func) \ + func(USB, usb, 0) \ + func(USB, usb, 1) \ + func(USB, usb, 2) +#endif + /* * This defines all MMC devices, even if the basic variant has no mmc1. * The non-supported device will be removed from the boot targets during -- 2.35.3

2 1