October 2023 - U-Boot

[PATCH v1 0/9] Add STM32MP2 SoCs and STM32MP257F-EV board support
by Patrice Chotard 10 Nov '23

10 Nov '23

Add STM32MP257F Evaluation board support, it embeds a STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ... Patrice Chotard (8): arm: caches: Make DCACHE_DEFAULT_OPTION accessible for ARM64 arch stm32mp: dram_init: Get RAM size from DT if no RAM driver found stm32mp: dram_init: Limit DDR usage under 4GB boundary for STM32MP stm32mp: bsec: Fix AARCH64 compilation warnings serial: stm32: Fix AARCH64 compilation warnings pinctrl: pinctrl_stm32: Add stm32mp2 support ARM: dts: stm32: Add STM32MP257F Evaluation board support stm32mp2: initial support Patrick Delaunay (1): stm32mp: dram_init: Fix AARCH64 compilation warnings arch/arm/Kconfig | 2 +- arch/arm/dts/Makefile | 3 + arch/arm/dts/stm32mp25-pinctrl.dtsi | 38 +++ arch/arm/dts/stm32mp25-u-boot.dtsi | 102 +++++++ arch/arm/dts/stm32mp251.dtsi | 285 ++++++++++++++++++ arch/arm/dts/stm32mp253.dtsi | 23 ++ arch/arm/dts/stm32mp255.dtsi | 9 + arch/arm/dts/stm32mp257.dtsi | 9 + arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi | 20 ++ arch/arm/dts/stm32mp257f-ev1.dts | 55 ++++ arch/arm/dts/stm32mp25xc.dtsi | 8 + arch/arm/dts/stm32mp25xf.dtsi | 8 + arch/arm/dts/stm32mp25xxai-pinctrl.dtsi | 83 +++++ arch/arm/dts/stm32mp25xxak-pinctrl.dtsi | 71 +++++ arch/arm/dts/stm32mp25xxal-pinctrl.dtsi | 71 +++++ arch/arm/include/asm/system.h | 16 +- arch/arm/mach-stm32mp/Kconfig | 26 +- arch/arm/mach-stm32mp/Kconfig.25x | 43 +++ arch/arm/mach-stm32mp/Makefile | 15 +- arch/arm/mach-stm32mp/bsec.c | 29 +- arch/arm/mach-stm32mp/dram_init.c | 17 +- arch/arm/mach-stm32mp/include/mach/stm32.h | 141 +++++---- .../arm/mach-stm32mp/include/mach/sys_proto.h | 26 ++ arch/arm/mach-stm32mp/stm32mp1/Makefile | 20 ++ arch/arm/mach-stm32mp/{ => stm32mp1}/cpu.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/fdt.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/psci.c | 0 .../{ => stm32mp1}/pwr_regulator.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/spl.c | 0 .../mach-stm32mp/{ => stm32mp1}/stm32mp13x.c | 0 .../mach-stm32mp/{ => stm32mp1}/stm32mp15x.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/tzc400.c | 0 arch/arm/mach-stm32mp/stm32mp2/Makefile | 9 + arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c | 68 +++++ arch/arm/mach-stm32mp/stm32mp2/cpu.c | 108 +++++++ arch/arm/mach-stm32mp/stm32mp2/fdt.c | 16 + arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c | 194 ++++++++++++ arch/arm/mach-stm32mp/syscon.c | 4 +- board/st/stm32mp2/Kconfig | 13 + board/st/stm32mp2/MAINTAINERS | 9 + board/st/stm32mp2/Makefile | 6 + board/st/stm32mp2/stm32mp2.c | 52 ++++ configs/stm32mp25_defconfig | 52 ++++ drivers/pinctrl/pinctrl_stm32.c | 2 + drivers/serial/serial_stm32.c | 23 +- drivers/serial/serial_stm32.h | 2 +- include/configs/stm32mp25_common.h | 24 ++ include/dt-bindings/pinctrl/stm32-pinfunc.h | 3 + 48 files changed, 1597 insertions(+), 108 deletions(-) create mode 100644 arch/arm/dts/stm32mp25-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp25-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp251.dtsi create mode 100644 arch/arm/dts/stm32mp253.dtsi create mode 100644 arch/arm/dts/stm32mp255.dtsi create mode 100644 arch/arm/dts/stm32mp257.dtsi create mode 100644 arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp257f-ev1.dts create mode 100644 arch/arm/dts/stm32mp25xc.dtsi create mode 100644 arch/arm/dts/stm32mp25xf.dtsi create mode 100644 arch/arm/dts/stm32mp25xxai-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp25xxak-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp25xxal-pinctrl.dtsi create mode 100644 arch/arm/mach-stm32mp/Kconfig.25x create mode 100644 arch/arm/mach-stm32mp/stm32mp1/Makefile rename arch/arm/mach-stm32mp/{ => stm32mp1}/cpu.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/fdt.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/psci.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/pwr_regulator.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/spl.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/stm32mp13x.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/stm32mp15x.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/tzc400.c (100%) create mode 100644 arch/arm/mach-stm32mp/stm32mp2/Makefile create mode 100644 arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c create mode 100644 arch/arm/mach-stm32mp/stm32mp2/cpu.c create mode 100644 arch/arm/mach-stm32mp/stm32mp2/fdt.c create mode 100644 arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c create mode 100644 board/st/stm32mp2/Kconfig create mode 100644 board/st/stm32mp2/MAINTAINERS create mode 100644 board/st/stm32mp2/Makefile create mode 100644 board/st/stm32mp2/stm32mp2.c create mode 100644 configs/stm32mp25_defconfig create mode 100644 include/configs/stm32mp25_common.h -- 2.25.1

3 28

[PATCH] ARM: dts: stm32mp: Repair damage from alignment with v6.3
by Marek Vasut 10 Nov '23

10 Nov '23

The patch fixed by this commit renders ST STM32MP15xx EV1 board and all DHSOM SoM based boards unbootable from SPI NOR. Fix the damage by updating -u-boot.dtsi to match the stm32mp15-pinctrl.dtsi update. Fixes: 08002ffd083d ("ARM: dts: stm32mp: alignment with v6.3") Signed-off-by: Marek Vasut <marex(a)denx.de> --- NOTE: It is truly incomprehensible how 08002ffd083d was ever tested at ST, I can only speculate it never was tested at all, grumb. --- Cc: Patrice Chotard <patrice.chotard(a)foss.st.com> Cc: Patrick Delaunay <patrick.delaunay(a)foss.st.com> Cc: u-boot(a)dh-electronics.com Cc: u-boot(a)lists.denx.de Cc: uboot-stm32(a)st-md-mailman.stormreply.com --- arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 16 ++++++++++++---- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 12 +++--------- arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 8 ++++++-- 3 files changed, 21 insertions(+), 15 deletions(-) diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi index 1f7fdbce530..eb283cacd27 100644 --- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi @@ -135,20 +135,28 @@ &qspi_bk1_pins_a { bootph-pre-ram; - pins1 { + pins { bootph-pre-ram; }; - pins2 { +}; + +&qspi_cs1_pins_a { + bootph-pre-ram; + pins { bootph-pre-ram; }; }; &qspi_bk2_pins_a { bootph-pre-ram; - pins1 { + pins { bootph-pre-ram; }; - pins2 { +}; + +&qspi_cs2_pins_a { + bootph-pre-ram; + pins { bootph-pre-ram; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index f12941b05f6..2f70b0690d2 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -134,20 +134,14 @@ &qspi_bk1_pins_a { bootph-pre-ram; - pins1 { - bootph-pre-ram; - }; - pins2 { + pins { bootph-pre-ram; }; }; -&qspi_bk2_pins_a { +&qspi_cs1_pins_a { bootph-pre-ram; - pins1 { - bootph-pre-ram; - }; - pins2 { + pins { bootph-pre-ram; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index eb905ad2820..552b35db3c7 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -98,10 +98,14 @@ &qspi_bk1_pins_a { bootph-pre-ram; - pins1 { + pins { bootph-pre-ram; }; - pins2 { +}; + +&qspi_cs1_pins_a { + bootph-pre-ram; + pins { bootph-pre-ram; }; }; -- 2.40.1

2 2

[PATCH v2 0/2] Disable setting ICACHE and DCACHE off for ARM64 platforms
by Bhupesh Sharma 10 Nov '23

10 Nov '23

As suggested by Tom, disable setting ICACHE and DCACHE off for ARM64 platforms. It is also noticed that with CACHEs off u-boot on ARM64 (ARMv8) boots slower. If some platforms still wish to turn off ICACHE / DCACHE during the SPL stage, support that configuration as well. While at it, also fix an compilation issue for stm32mp when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are enabled. Cc: Patrice Chotard <patrice.chotard(a)foss.st.com> Cc: Patrick Delaunay <patrick.delaunay(a)foss.st.com> Cc: Tom Rini <trini(a)konsulko.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Peng Fan <peng.fan(a)nxp.com> Bhupesh Sharma (2): arm: stm32mp: Really fix compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are enabled armv8: Disable SYS_DCACHE_OFF & SYS_ICACHE_OFF for ARM64 arch/arm/Kconfig | 2 ++ arch/arm/cpu/armv8/Makefile | 4 ++-- arch/arm/mach-stm32mp/cpu.c | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) -- 2.38.1

5 10

[PATCH] pci: ecm generic: use dev_read_() interface
by Mayuresh Chitale 10 Nov '23

10 Nov '23

Use dev_read_() api instead of the fdtdec API to fetch the host controller's reg property value. This is similar to the other host controller drivers such as Sifive, Rockchip etc. Without this change, enabling CONFIG_OF_LIVE breaks the PCIe enumeration on Qemu Risc-V virt machine. The issue is described in the link below: Link: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/1 Signed-off-by: Mayuresh Chitale <mchitale(a)ventanamicro.com> --- drivers/pci/pcie_ecam_generic.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c index 1a9f9aec2e..f0effe0001 100644 --- a/drivers/pci/pcie_ecam_generic.c +++ b/drivers/pci/pcie_ecam_generic.c @@ -132,19 +132,14 @@ static int pci_generic_ecam_write_config(struct udevice *bus, pci_dev_t bdf, static int pci_generic_ecam_of_to_plat(struct udevice *dev) { struct generic_ecam_pcie *pcie = dev_get_priv(dev); - struct fdt_resource reg_res; - DECLARE_GLOBAL_DATA_PTR; - int err; - - err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg", - 0, &reg_res); - if (err < 0) { - pr_err("\"reg\" resource not found\n"); - return err; - } - - pcie->size = fdt_resource_size(&reg_res); - pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE); + fdt_addr_t addr; + fdt_size_t size; + + addr = dev_read_addr_size(dev, "reg", &size); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + pcie->size = size; + pcie->cfg_base = map_physmem(addr, pcie->size, MAP_NOCACHE); return 0; } -- 2.34.1

3 5

[PATCH v3 0/2] rng: Provide a RNG based on the RISC-V Zkr ISA extension
by Heinrich Schuchardt 10 Nov '23

10 Nov '23

The Zkr ISA extension (ratified Nov 2021) introduced the seed CSR. It provides an interface to a physical entropy source. A RNG driver based on the seed CSR is provided. It depends on mseccfg.sseed being set in the SBI firmware. If the seed CSR readable, is not determinable by S-mode without risking an exception. For safe driver probing allow to resume via a longjmp after an exception. As the driver depends on mseccfg.sseed=1 we should wait with merging the driver until a decision has been taken in the RISC-V PRS TG on prescribing this. Setting mseccfg.sseed=1 is queued for OpenSBI [1]. This has been discussed in the RISC-V Boot & Runtime Services TG. Standardization has to be pursued via the upcoming platform specification. A bug fix for QEMU relating to the Zkr extension is available in [2]. A similar Linux driver has been proposed in [3]. [1] lib: sbi: Configure seed bits when MSECCFG is readable https://patchwork.ozlabs.org/project/opensbi/patch/20230712083254.1585244-1… [2] [PATCH v2 1/1] target/riscv: correct csr_ops[CSR_MSECCFG] https://lore.kernel.org/qemu-devel/20231030102105.19501-1-heinrich.schuchar… [3] [PATCH v4 4/4] RISC-V: Implement archrandom when Zkr is available https://lore.kernel.org/linux-riscv/20230712084134.1648008-5-sameo@rivosinc… v3: Add API documentation. v2: Catch exception if mseccfg.sseed=0. Heinrich Schuchardt (2): riscv: allow resume after exception rng: Provide a RNG based on the RISC-V Zkr ISA extension arch/riscv/lib/interrupts.c | 13 ++++ doc/api/index.rst | 1 + drivers/rng/Kconfig | 8 +++ drivers/rng/Makefile | 1 + drivers/rng/riscv_zkr_rng.c | 116 ++++++++++++++++++++++++++++++++++++ include/interrupt.h | 45 ++++++++++++++ 6 files changed, 184 insertions(+) create mode 100644 drivers/rng/riscv_zkr_rng.c create mode 100644 include/interrupt.h -- 2.40.1

10 49

[PATCH v2 0/3] BOOTP/DHCPv4 enhancements
by seanedmond＠linux.microsoft.com 09 Nov '23

09 Nov '23

From: Sean Edmond <seanedmond(a)microsoft.com> In our datacenter application, a single DHCP server is servicing 36000+ clients. Improvements are required to the DHCPv4 retransmission behavior to align with RFC and ensure less pressure is exerted on the server: - retransmission backoff interval maximum is configurable (environment variable bootpretransmitperiodmax) - initial retransmission backoff interval is configurable (environment variable bootpretransmitperiodinit) - transaction ID is kept the same for each BOOTP/DHCPv4 request (not recreated on each retry) For our application we'll use: - bootpretransmitperiodmax=16000 - bootpretransmitperiodinit=2000 A new configuration BOOTP_RANDOM_XID has been added to enable a randomized BOOTP/DHCPv4 transaction ID. Add functionality for DHCPv4 sending/parsing option 209 (PXE config file). Enabled with Kconfig BOOTP_PXE_DHCP_OPTION. Note, this patch was submitted previously but this latest version has been enhanced to avoid a possible double free(). changes in v2: - use env_get_ulong() to get environment variables Sean Edmond (3): net: Get pxe config file from dhcp option 209 net: bootp: BOOTP/DHCPv4 retransmission improvements net: bootp: add config option BOOTP_RANDOM_XID cmd/Kconfig | 11 ++++++++ cmd/pxe.c | 10 +++++++ net/bootp.c | 78 ++++++++++++++++++++++++++++++++++++++++++----------- 3 files changed, 84 insertions(+), 15 deletions(-) -- 2.40.0

5 18

[PATCH] board: samsung: Remove incorrect SYS_CONFIG_NAME in axy17lte Kconfig
by Sam Protsenko 09 Nov '23

09 Nov '23

The global SYS_CONFIG_NAME in axy17lte Kconfig overrides SYS_CONFIG_NAME for all boards specified after this line in arch/arm/mach-exynos/Kconfig: source "board/samsung/axy17lte/Kconfig" Right now it's the last 'source' line there, so the issue is not reproducible. But once some board is moved or added after this line the next build error will happen: GEN include/autoconf.mk.dep In file included from ./include/common.h:16: include/config.h:3:10: fatal error: configs/exynos78x0-common.h.h: No such file or directory 3 | #include <configs/exynos78x0-common.h.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. That's happening because axy17lte Kconfig defines SYS_CONFIG_NAME option in global namespace (not guarded with any "if TARGET_..."), so it basically rewrites the correct SYS_CONFIG_NAME defined in the hypothetical boards which might appear after axy17lte in mach-exynos Kconfig. Another side of the issue is that SYS_CONFIG_NAME is defined incorrectly in axy17lte Kconfig: config SYS_CONFIG_NAME default "exynos78x0-common.h" The .h extension should not have been specified there. It's leading to the build error, as the generated include file has double '.h' extension. Fix the issue by simply removing the SYS_CONFIG_NAME definition in axy17lte Kconfig, as all related defconfigs already declare internal values for SYS_CONFIG_NAME: - a5y17lte_defconfig - a7y17lte_defconfig - a3y17lte_defconfig Signed-off-by: Sam Protsenko <semen.protsenko(a)linaro.org> Fixes: 3e2095e960b4 ("board: samsung: add support for Galaxy A series of 2017 (a5y17lte)") --- board/samsung/axy17lte/Kconfig | 8 -------- 1 file changed, 8 deletions(-) diff --git a/board/samsung/axy17lte/Kconfig b/board/samsung/axy17lte/Kconfig index a018547ff5d4..209394a8a5a8 100644 --- a/board/samsung/axy17lte/Kconfig +++ b/board/samsung/axy17lte/Kconfig @@ -1,11 +1,3 @@ -config SYS_CONFIG_NAME - string "Board configuration name" - default "exynos78x0-common.h" - help - This option contains information about board configuration name. - Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header - will be used for board configuration. - if TARGET_A5Y17LTE config SYS_BOARD default "axy17lte" -- 2.39.2

3 3

[UBOOT PATCH v2] test/py: net: Add dhcp abort test
by Love Kumar 09 Nov '23

09 Nov '23

Abort the dhcp request in the middle by pressing ctrl + c on u-boot prompt and validate the abort status. Signed-off-by: Love Kumar <love.kumar(a)amd.com> --- Changes in v2: - Mark CMD_MII command dependency --- test/py/tests/test_net.py | 45 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/test/py/tests/test_net.py b/test/py/tests/test_net.py index b2241ae6a482..6d32ad2db687 100644 --- a/test/py/tests/test_net.py +++ b/test/py/tests/test_net.py @@ -7,6 +7,7 @@ import pytest import u_boot_utils import uuid +import re """ Note: This test relies on boardenv_* containing configuration values to define @@ -115,6 +116,50 @@ def test_net_dhcp(u_boot_console): global net_set_up net_set_up = True +(a)pytest.mark.buildconfigspec("cmd_dhcp") +(a)pytest.mark.buildconfigspec("cmd_mii") +def test_net_dhcp_abort(u_boot_console): + """Test the dhcp command by pressing ctrl+c in the middle of dhcp request + + The boardenv_* file may be used to enable/disable this test; see the + comment at the beginning of this file. + """ + + test_dhcp = u_boot_console.config.env.get("env__net_dhcp_server", False) + if not test_dhcp: + pytest.skip("No DHCP server available") + + u_boot_console.run_command("setenv autoload no") + + # Phy reset before running dhcp command + output = u_boot_console.run_command("mii device") + eth_num = re.search(r"Current device: '(.+?)'", output).groups()[0] + u_boot_console.run_command(f"mii device {eth_num}") + output = u_boot_console.run_command("mii info") + eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16)) + u_boot_console.run_command(f"mii modify {eth_addr} 0 0x8000 0x8000") + + u_boot_console.run_command("dhcp", wait_for_prompt=False) + try: + u_boot_console.wait_for("Waiting for PHY auto negotiation to complete") + except: + pytest.skip("Timeout waiting for PHY auto negotiation to complete") + + u_boot_console.wait_for("done") + + # Sending Ctrl-C + output = u_boot_console.run_command( + chr(3), wait_for_echo=False, send_nl=False + ) + + assert "TIMEOUT" not in output + assert "DHCP client bound to address " not in output + assert "Abort" in output + + # Provide a time to recover from Abort - if it is not performed + # There is message like: ethernet@ff0e0000: No link. + u_boot_console.run_command("sleep 1") + @pytest.mark.buildconfigspec('cmd_dhcp6') def test_net_dhcp6(u_boot_console): """Test the dhcp6 command. -- 2.25.1

3 2

[PATCH 0/8] Add some more EFI capsule tooling support
by Sughosh Ganu 09 Nov '23

09 Nov '23

Recently, a set of patches were merged in next, which were adding support for generating capsules as part of the U-Boot build. Mid way through the review of those patches, it was decided to drop the patches for generating capsules through a config file. That was primarily due to the use of absolute paths in binman for testing the capsule genertion through config file. Now that the base set of patches have been merged, this series is picking up the remaining patches for review. This series addresses the concern that Simon Glass had with the use of absolute paths. The first set of patches are adding support for generating capsules by parsing the capsule parameters through a config file, and adding a binman entry type for this. These are patches 1-5. The other set of patches is for generating empty accept and revert capsules through binman. These capsules are needed for the FWU A/B update functionality. Sughosh Ganu (8): tools: mkeficapsule: Add support for parsing capsule params from config file btool: mkeficapsule: Generate capsule through a config file binman: capsule: Generate capsules through config file doc: Document capsule generation through a config file sandbox: capsule: Add a config file for generating capsules test: capsule: Generate capsules through config file btool: mkeficapsule: Add support for EFI empty capsule generation binman: capsule: Add support for generating EFI empty capsules configs/sandbox_defconfig | 2 + doc/develop/uefi/uefi.rst | 70 ++++ .../test_efi_capsule/capsule_gen_binman.dts | 8 + test/py/tests/test_efi_capsule/conftest.py | 18 +- .../test_efi_capsule/sandbox_capsule_cfg.txt | 162 ++++++++ tools/Kconfig | 16 + tools/Makefile | 1 + tools/binman/btool/mkeficapsule.py | 45 +++ tools/binman/entries.rst | 35 ++ tools/binman/etype/efi_capsule_cfg_file.py | 66 ++++ tools/binman/etype/efi_empty_capsule.py | 91 +++++ tools/binman/ftest.py | 81 ++++ tools/binman/test/319_capsule_cfg.dts | 15 + tools/binman/test/320_capsule_accept.dts | 16 + tools/binman/test/321_capsule_revert.dts | 14 + .../test/322_capsule_accept_missing_guid.dts | 14 + .../binman/test/323_capsule_accept_revert.dts | 17 + tools/eficapsule.h | 115 ++++++ tools/mkeficapsule.c | 87 +++-- tools/mkeficapsule_parse.c | 352 ++++++++++++++++++ 20 files changed, 1190 insertions(+), 35 deletions(-) create mode 100644 test/py/tests/test_efi_capsule/sandbox_capsule_cfg.txt create mode 100644 tools/binman/etype/efi_capsule_cfg_file.py create mode 100644 tools/binman/etype/efi_empty_capsule.py create mode 100644 tools/binman/test/319_capsule_cfg.dts create mode 100644 tools/binman/test/320_capsule_accept.dts create mode 100644 tools/binman/test/321_capsule_revert.dts create mode 100644 tools/binman/test/322_capsule_accept_missing_guid.dts create mode 100644 tools/binman/test/323_capsule_accept_revert.dts create mode 100644 tools/mkeficapsule_parse.c -- 2.34.1

4 19

[PATCH 0/2] rockchip: Use dwc3-generic driver on RK3328 and RK3399
by Jonas Karlman 09 Nov '23

09 Nov '23

This series change to use the dwc3-generic driver on all RK3328 and RK3399 boards. Also switch to use DM_USB_GADGET and remove then obsolete board_usb_init() and dm_usb_gadget_handle_interrupts() functions. First patch change all RK33xx boards to use dwc3-generic driver. Second patch remove obsolete rk3399 usb gadget functions. This has been tested and validated on rockpro64 and rock-pi-4 boards. Jonas Karlman (2): configs: rockchip: Use dwc3-generic driver on RK3328 and RK3399 rockchip: board: Remove dwc3 usb init and gadget handler functions arch/arm/mach-rockchip/board.c | 24 ------------------- configs/chromebook_bob_defconfig | 2 +- configs/chromebook_kevin_defconfig | 2 +- configs/eaidk-610-rk3399_defconfig | 4 +++- configs/evb-rk3399_defconfig | 1 - configs/firefly-rk3399_defconfig | 1 - configs/khadas-edge-captain-rk3399_defconfig | 4 +++- configs/khadas-edge-rk3399_defconfig | 4 +++- configs/khadas-edge-v-rk3399_defconfig | 4 +++- configs/leez-rk3399_defconfig | 4 +++- configs/nanopc-t4-rk3399_defconfig | 4 +++- configs/nanopi-m4-2gb-rk3399_defconfig | 4 +++- configs/nanopi-m4-rk3399_defconfig | 4 +++- configs/nanopi-m4b-rk3399_defconfig | 4 +++- configs/nanopi-neo4-rk3399_defconfig | 4 +++- configs/nanopi-r4s-rk3399_defconfig | 3 ++- configs/orangepi-r1-plus-lts-rk3328_defconfig | 3 ++- configs/orangepi-r1-plus-rk3328_defconfig | 3 ++- configs/orangepi-rk3399_defconfig | 4 +++- configs/pinebook-pro-rk3399_defconfig | 1 - configs/pinephone-pro-rk3399_defconfig | 1 - configs/puma-rk3399_defconfig | 1 - configs/roc-pc-mezzanine-rk3399_defconfig | 2 +- configs/roc-pc-rk3399_defconfig | 2 +- configs/rock-4c-plus-rk3399_defconfig | 2 +- configs/rock-4se-rk3399_defconfig | 2 +- configs/rock-pi-4-rk3399_defconfig | 2 +- configs/rock-pi-4c-rk3399_defconfig | 2 +- configs/rock-pi-n10-rk3399pro_defconfig | 2 +- configs/rock960-rk3399_defconfig | 3 ++- configs/rockpro64-rk3399_defconfig | 1 - drivers/usb/host/Kconfig | 1 - 32 files changed, 50 insertions(+), 55 deletions(-) -- 2.42.0

3 7