August 2022 - U-Boot

[PATCH] MAINTAINERS: Change POWERPC MPC85XX maintainer to Marek Behún
by Marek Behún 01 Aug '22

01 Aug '22

After a discussion with Tom Rini, we've agreed that I am going to take over custodianship of the MPC85XX platform, since it seems other people do not have necessary interest or time and getting things done over there takes too long. Since I am only working on one MPC85XX board, Turris 1.x, and do not have time to do thorough reviews of patches for this entire platform (other than those concerning Turris 1.x board), for other boards I will only run patches through CI and checkpatch, and then send them via PR upwards to Tom. Signed-off-by: Marek Behún <kabel(a)kernel.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index cd54e6663d..3347bd4126 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1209,7 +1209,7 @@ F: arch/powerpc/cpu/mpc83xx/ F: arch/powerpc/include/asm/arch-mpc83xx/ POWERPC MPC85XX -M: Priyanka Jain <priyanka.jain(a)nxp.com> +M: Marek Behún <kabel(a)kernel.org> S: Maintained T: git https://source.denx.de/u-boot/custodians/u-boot-mpc85xx.git F: arch/powerpc/cpu/mpc85xx/ -- 2.35.1

3 3

cmd_process warning
by Sergei Antonov 01 Aug '22

01 Aug '22

Hello! There is an annoying warning about conflicting return types: common/command.c:586:20: warning: conflicting types for 'cmd_process' due to enum/integer mismatch; have 'enum command_ret_t(int, int, char * const*, int *, ulong *)' {aka 'enum command_ret_t(int, int, char * const*, int *, long unsigned int *)'} [-Wenum-int-mismatch] In file included from common/command.c:13: include/command.h:234:5: note: previous declaration of 'cmd_process' with type 'int(int, int, char * const*, int *, long unsigned int *)' It can be fixed by replacing 'int' with 'enum command_ret_t' in include/command.h

2 1

Re: [PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot
by Tom Rini 01 Aug '22

01 Aug '22

[resend to the list too this time] On Sat, Jul 09, 2022 at 12:43:44AM +0200, Pali Rohár wrote: > PING???? > > I still have not received any response. What is the point? > > On Sunday 03 July 2022 14:38:36 Pali Rohár wrote: > > PING! > > > > On Thursday 23 June 2022 15:43:45 Pali Rohár wrote: > > > On Thursday 16 June 2022 17:01:50 Peng Fan (OSS) wrote: > > > > 在 2022/4/25 22:50, Pali Rohár 写道: > > > > > All *boot env commands overrides default boot source location via i2c. > > > > > After board reset without power off, BootROM then starts booting U-Boot > > > > > from this specified location instead of the default one. > > > > > > > > > > Add new env command defboot which reverts boot location to the default > > > > > value, which in most cases is configurable by HW DIP switches. > > > > > > > > > > And add new env commands norlowerboot, norupperboot, sd2boot to boot from > > > > > other locations. norlowerboot would instruct BootROM to boot from lower NOR > > > > > bank, norupperboot from upper NOR bank and sd2boot from SD card with > > > > > alternative configuration. > > > > > > > > > > Signed-off-by: Pali Rohár <pali(a)kernel.org> > > > > > > > > Not able to apply this patch. > > > > > > And what is the reason? It applies cleanly on top of next branch, which > > > is today at commit 9121478ee6f2aee381f8fe49d8997d43527d351a. Peng, this patch doesn't apply currently but also looks fairly obvious to adapt to top of tree. Please just make it apply when you pick this up, thanks. -- Tom

2 2

[GIT PULL] please pull fsl-qoirq-2022-7-29
by Peng Fan 01 Aug '22

01 Aug '22

Hi Tom, Please pull fsl-qoriq-2022-7-29 ---------------------------------------- mpc85xx: support for generating QorIQ pre-PBL eSDHC boot sector p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping p1_p2_rdb_pc: Fix parsing inverted bits from boot input data p1_p2_rdb_pc: Simplify SPL offset macros ---------------------------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/12929 Thanks, Peng. The following changes since commit 87069c79e830b2ab909537946a1e1db0e5fe7d8c: Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mmc (2022-07-27 07:00:54 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git tags/fsl-qoriq-2022-7-29 for you to fetch changes up to 3982e761dcdec45db17207dee3851397fe23f45d: board: freescale: p1_p2_rdb_pc: Simplify SPL offset macros (2022-07-29 19:49:13 +0800) ---------------------------------------------------------------- Pali Rohár (4): powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector board: freescale: p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data board: freescale: p1_p2_rdb_pc: Simplify SPL offset macros arch/powerpc/cpu/mpc85xx/Kconfig | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/start.S | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 8 ++++++++ arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 ++++++++ board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 6 ++++-- board/freescale/p1_p2_rdb_pc/tlb.c | 4 ++-- include/configs/p1_p2_rdb_pc.h | 12 ++++++------ 7 files changed, 175 insertions(+), 10 deletions(-)

2 1

[PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support
by Frieder Schrempf 01 Aug '22

01 Aug '22

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> This set contains several improvements for the kontron-sl-mx8mm board configuration (patches 1 to 13) and support for a new SoM (patch 14, including baseboard) that complies to the Open Standard Module (OSM) 1.0 hardware specification, size S (https://sget.org/standards/osm). Frieder Schrempf (14): imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees imx: kontron-sl-mx8mm: Add redundant environment imx: kontron-sl-mx8mm: Enable environment in MMC imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT imx: kontron-sl-mx8mm: Enable bootaux command imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types imx: kontron-sl-mx8mm: Adjust board and SoM model strings imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names imx: kontron-sl-mx8mm: Simplify code in spl.c imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S arch/arm/dts/Makefile | 1 - .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 - arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 - .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 7 +- arch/arm/dts/imx8mm-kontron-n801x-s.dts | 5 +- arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 30 +- .../dts/imx8mm-kontron-n802x-s-u-boot.dtsi | 6 + arch/arm/dts/imx8mm-kontron-n802x-s.dts | 376 ++++ arch/arm/dts/imx8mm-kontron-n802x-som.dtsi | 309 +++ ...tsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} | 8 +- board/kontron/sl-mx8mm/MAINTAINERS | 1 + board/kontron/sl-mx8mm/lpddr4_timing.c | 1969 ++++++++--------- board/kontron/sl-mx8mm/sl-mx8mm.c | 41 + board/kontron/sl-mx8mm/sl-mx8mm.env | 7 + board/kontron/sl-mx8mm/spl.c | 85 +- configs/kontron-sl-mx8mm_defconfig | 10 +- doc/board/kontron/sl-mx8mm.rst | 7 +- include/configs/kontron-sl-mx8mm.h | 16 +- 18 files changed, 1717 insertions(+), 1283 deletions(-) delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-som.dtsi rename arch/arm/dts/{imx8mm-kontron-n801x-u-boot.dtsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} (88%) create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.env -- 2.37.0

4 18

[RFC PATCH 0/2] cmd/fru: move FRU handling support to common region
by Jae Hyun Yoo 01 Aug '22

01 Aug '22

Hello, The FRU handling was added as a Xilinx board dependent support but it would be useful for other boards too, so this commit moves the FRU handling support to the common region to be enabled by CONFIG_CMD_FRU. Since the Multirecord parsing logic should be implemented on each board specifically, it defines 'fru_parse_multirec' as a weak function so that the function can be replaced with the board specific implementation. Also, this series adds 'Product Info' of FRU parsing support. Please review! Thanks, Jae Graeme Gregory (1): cmd/fru: cmd/fru: move FRU handling support to common region Jae Hyun Yoo (1): cmd/fru: add product info area parsing support board/xilinx/Kconfig | 8 - board/xilinx/common/Makefile | 3 - board/xilinx/common/board.c | 63 ++++++-- cmd/Kconfig | 8 + cmd/Makefile | 1 + {board/xilinx/common => cmd}/fru.c | 3 +- common/Makefile | 2 + {board/xilinx/common => common}/fru_ops.c | 171 +++++++++++++++++++--- {board/xilinx/common => include}/fru.h | 37 +++-- 9 files changed, 237 insertions(+), 59 deletions(-) rename {board/xilinx/common => cmd}/fru.c (99%) rename {board/xilinx/common => common}/fru_ops.c (73%) rename {board/xilinx/common => include}/fru.h (76%) -- 2.25.1

2 9

[PATCH v5 0/1] kconfig: Add some new macros
by Simon Glass 01 Aug '22

01 Aug '22

This series adds a few more macros to kconfig, along with a bit of refactoring of what is there. It also adds some basic tests for the kconfig macros. Finally, to make the tests work, it enhances buildman to support changing CONFIG options on the fly when building. Changes in v5: - Correct a problem with azure not supporting buildman's parent directory - Don't run the tests on sandbox_vpl Changes in v4: - Expand the series with tests and buildman changes Simon Glass (1): test: Add some tests for kconfig.h test/Kconfig | 3 +- test/Makefile | 4 ++- test/lib/Kconfig | 23 ++++++++++++++ test/lib/Makefile | 5 +++ test/lib/kconfig.c | 58 +++++++++++++++++++++++++++++++++++ test/lib/kconfig_spl.c | 44 ++++++++++++++++++++++++++ test/py/tests/test_kconfig.py | 39 +++++++++++++++++++++++ 7 files changed, 174 insertions(+), 2 deletions(-) create mode 100644 test/lib/Kconfig create mode 100644 test/lib/kconfig.c create mode 100644 test/lib/kconfig_spl.c create mode 100644 test/py/tests/test_kconfig.py -- 2.37.1.455.g008518b4e5-goog

1 0