Add Nuvoton BMC NPCM750 i2c driver
Signed-off-by: Jim Liu <JJLIU0(a)nuvoton.com>
---
changes for v4:
- remove i2c doc
changes for v3:
- add i2c doc
Changes for v2:
- use debug output in reset function
- use clr/setbits_8
---
drivers/i2c/Kconfig | 5 +
drivers/i2c/Makefile | 1 +
drivers/i2c/npcm-i2c.c | 631 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 637 insertions(+)
create mode 100644 drivers/i2c/npcm-i2c.c
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d25c5736ef..7e113b289e 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -447,6 +447,11 @@ config SYS_I2C_NEXELL
have several I2C ports and all are provided, controlled by the
device tree.
+config SYS_I2C_NPCM
+ bool "Nuvoton NPCM I2C driver"
+ help
+ Support for Nuvoton I2C controller driver.
+
config SYS_I2C_OCORES
bool "ocores I2C driver"
depends on DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 9d41f379bb..7e046f809a 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_SYS_I2C_MV) += mv_i2c.o
obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
obj-$(CONFIG_SYS_I2C_NEXELL) += nx_i2c.o
+obj-$(CONFIG_SYS_I2C_NPCM) += npcm_i2c.o
obj-$(CONFIG_SYS_I2C_OCORES) += ocores_i2c.o
obj-$(CONFIG_SYS_I2C_OCTEON) += octeon_i2c.o
obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
diff --git a/drivers/i2c/npcm-i2c.c b/drivers/i2c/npcm-i2c.c
new file mode 100644
index 0000000000..dfac6483de
--- /dev/null
+++ b/drivers/i2c/npcm-i2c.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology Corp.
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <linux/iopoll.h>
+#include <asm/arch/gcr.h>
+
+#define I2C_FREQ_100K 100000
+#define NPCM_I2C_TIMEOUT_MS 10
+#define NPCM7XX_I2CSEGCTL_INIT_VAL 0x0333F000
+#define NPCM8XX_I2CSEGCTL_INIT_VAL 0x9333F000
+
+/* SCLFRQ min/max field values */
+#define SCLFRQ_MIN 10
+#define SCLFRQ_MAX 511
+
+/* SMBCTL1 */
+#define SMBCTL1_START BIT(0)
+#define SMBCTL1_STOP BIT(1)
+#define SMBCTL1_INTEN BIT(2)
+#define SMBCTL1_ACK BIT(4)
+#define SMBCTL1_STASTRE BIT(7)
+
+/* SMBCTL2 */
+#define SMBCTL2_ENABLE BIT(0)
+
+/* SMBCTL3 */
+#define SMBCTL3_SCL_LVL BIT(7)
+#define SMBCTL3_SDA_LVL BIT(6)
+
+/* SMBCST */
+#define SMBCST_BB BIT(1)
+#define SMBCST_TGSCL BIT(5)
+
+/* SMBST */
+#define SMBST_XMIT BIT(0)
+#define SMBST_MASTER BIT(1)
+#define SMBST_STASTR BIT(3)
+#define SMBST_NEGACK BIT(4)
+#define SMBST_BER BIT(5)
+#define SMBST_SDAST BIT(6)
+
+/* SMBCST3 in bank0 */
+#define SMBCST3_EO_BUSY BIT(7)
+
+/* SMBFIF_CTS in bank1 */
+#define SMBFIF_CTS_CLR_FIFO BIT(6)
+
+#define SMBFIF_CTL_FIFO_EN BIT(4)
+#define SMBCTL3_BNK_SEL BIT(5)
+
+enum {
+ I2C_ERR_NACK = 1,
+ I2C_ERR_BER,
+ I2C_ERR_TIMEOUT,
+};
+
+struct smb_bank0_regs {
+ u8 addr3;
+ u8 addr7;
+ u8 addr4;
+ u8 addr8;
+ u16 addr5;
+ u16 addr6;
+ u8 cst2;
+ u8 cst3;
+ u8 ctl4;
+ u8 ctl5;
+ u8 scllt;
+ u8 fif_ctl;
+ u8 sclht;
+};
+
+struct smb_bank1_regs {
+ u8 fif_cts;
+ u8 fair_per;
+ u16 txf_ctl;
+ u32 t_out;
+ u8 cst2;
+ u8 cst3;
+ u16 txf_sts;
+ u16 rxf_sts;
+ u8 rxf_ctl;
+};
+
+struct npcm_i2c_regs {
+ u16 sda;
+ u16 st;
+ u16 cst;
+ u16 ctl1;
+ u16 addr;
+ u16 ctl2;
+ u16 addr2;
+ u16 ctl3;
+ union {
+ struct smb_bank0_regs bank0;
+ struct smb_bank1_regs bank1;
+ };
+
+};
+
+struct npcm_i2c_bus {
+ struct npcm_i2c_regs *reg;
+ int num;
+ u32 apb_clk;
+ u32 freq;
+ bool started;
+};
+
+static void npcm_dump_regs(struct npcm_i2c_bus *bus)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+
+ printf("\n");
+ printf("SMBST=0x%x\n", readb(®->st));
+ printf("SMBCST=0x%x\n", readb(®->cst));
+ printf("SMBCTL1=0x%x\n", readb(®->ctl1));
+ printf("\n");
+}
+
+static int npcm_i2c_check_sda(struct npcm_i2c_bus *bus)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ ulong start_time;
+ int err = I2C_ERR_TIMEOUT;
+ u8 val;
+
+ start_time = get_timer(0);
+ /* wait SDAST to be 1 */
+ while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+ val = readb(®->st);
+ if (val & SMBST_NEGACK) {
+ err = I2C_ERR_NACK;
+ break;
+ }
+ if (val & SMBST_BER) {
+ err = I2C_ERR_BER;
+ break;
+ }
+ if (val & SMBST_SDAST) {
+ err = 0;
+ break;
+ }
+ }
+
+ if (err)
+ printf("%s: err %d\n", __func__, err);
+
+ return err;
+}
+
+static int npcm_i2c_send_start(struct npcm_i2c_bus *bus)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ ulong start_time;
+ int err = I2C_ERR_TIMEOUT;
+
+ /* Generate START condition */
+ setbits_8(®->ctl1, SMBCTL1_START);
+
+ start_time = get_timer(0);
+ while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+ if (readb(®->st) & SMBST_BER)
+ return I2C_ERR_BER;
+ if (readb(®->st) & SMBST_MASTER) {
+ err = 0;
+ break;
+ }
+ }
+ bus->started = true;
+
+ return err;
+}
+
+static int npcm_i2c_send_stop(struct npcm_i2c_bus *bus, bool wait)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ ulong start_time;
+ int err = I2C_ERR_TIMEOUT;
+
+ setbits_8(®->ctl1, SMBCTL1_STOP);
+
+ /* Clear NEGACK, STASTR and BER bits */
+ writeb(SMBST_STASTR | SMBST_NEGACK | SMBST_BER, ®->st);
+
+ bus->started = false;
+
+ if (!wait)
+ return 0;
+
+ start_time = get_timer(0);
+ while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+ if ((readb(®->ctl1) & SMBCTL1_STOP) == 0) {
+ err = 0;
+ break;
+ }
+ }
+ if (err) {
+ printf("%s: err %d\n", __func__, err);
+ npcm_dump_regs(bus);
+ }
+
+ return err;
+}
+
+static void npcm_i2c_reset(struct npcm_i2c_bus *bus)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+
+ debug("%s: module %d\n", __func__, bus->num);
+ /* disable & enable SMB moudle */
+ clrbits_8(®->ctl2, SMBCTL2_ENABLE);
+ setbits_8(®->ctl2, SMBCTL2_ENABLE);
+
+ /* clear BB and status */
+ writeb(SMBCST_BB, ®->cst);
+ writeb(0xff, ®->st);
+
+ /* select bank 1 */
+ setbits_8(®->ctl3, SMBCTL3_BNK_SEL);
+ /* Clear all fifo bits */
+ writeb(SMBFIF_CTS_CLR_FIFO, ®->bank1.fif_cts);
+
+ /* select bank 0 */
+ clrbits_8(®->ctl3, SMBCTL3_BNK_SEL);
+ /* clear EOB bit */
+ writeb(SMBCST3_EO_BUSY, ®->bank0.cst3);
+ /* single byte mode */
+ clrbits_8(®->bank0.fif_ctl, SMBFIF_CTL_FIFO_EN);
+
+ /* set POLL mode */
+ writeb(0, ®->ctl1);
+}
+
+static void npcm_i2c_recovery(struct npcm_i2c_bus *bus, u32 addr)
+{
+ u8 val;
+ int iter = 27;
+ struct npcm_i2c_regs *reg = bus->reg;
+ int err;
+
+ val = readb(®->ctl3);
+ /* Skip recovery, bus not stucked */
+ if ((val & SMBCTL3_SCL_LVL) && (val & SMBCTL3_SDA_LVL))
+ return;
+
+ printf("Performing I2C bus %d recovery...\n", bus->num);
+ /* SCL/SDA are not releaed, perform recovery */
+ while (1) {
+ /* toggle SCL line */
+ writeb(SMBCST_TGSCL, ®->cst);
+
+ udelay(20);
+ val = readb(®->ctl3);
+ if (val & SMBCTL3_SDA_LVL)
+ break;
+ if (iter-- == 0)
+ break;
+ }
+
+ if (val & SMBCTL3_SDA_LVL) {
+ writeb((u8)((addr << 1) & 0xff), ®->sda);
+ err = npcm_i2c_send_start(bus);
+ if (!err) {
+ udelay(20);
+ npcm_i2c_send_stop(bus, false);
+ udelay(200);
+ printf("I2C bus %d recovery completed\n",
+ bus->num);
+ } else {
+ printf("%s: send START err %d\n", __func__, err);
+ }
+ } else {
+ printf("Fail to recover I2C bus %d\n", bus->num);
+ }
+ npcm_i2c_reset(bus);
+}
+
+static int npcm_i2c_send_address(struct npcm_i2c_bus *bus, u8 addr,
+ bool stall)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ ulong start_time;
+ u8 val;
+
+ /* Stall After Start Enable */
+ if (stall)
+ setbits_8(®->ctl1, SMBCTL1_STASTRE);
+
+ writeb(addr, ®->sda);
+ if (stall) {
+ start_time = get_timer(0);
+ while (get_timer(start_time) < NPCM_I2C_TIMEOUT_MS) {
+ if (readb(®->st) & SMBST_STASTR)
+ break;
+
+ if (readb(®->st) & SMBST_BER) {
+ clrbits_8(®->ctl1, SMBCTL1_STASTRE);
+ return I2C_ERR_BER;
+ }
+ }
+ }
+
+ /* check ACK */
+ val = readb(®->st);
+ if (val & SMBST_NEGACK) {
+ debug("NACK on addr 0x%x\n", addr >> 1);
+ /* After a Stop condition, writing 1 to NEGACK clears it */
+ return I2C_ERR_NACK;
+ }
+ if (val & SMBST_BER)
+ return I2C_ERR_BER;
+
+ return 0;
+}
+
+static int npcm_i2c_read_bytes(struct npcm_i2c_bus *bus, u8 *data, int len)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ u8 val;
+ int i;
+ int err = 0;
+
+ if (len == 1) {
+ /* bus should be stalled before receiving last byte */
+ setbits_8(®->ctl1, SMBCTL1_ACK);
+
+ /* clear STASTRE if it is set */
+ if (readb(®->ctl1) & SMBCTL1_STASTRE) {
+ writeb(SMBST_STASTR, ®->st);
+ clrbits_8(®->ctl1, SMBCTL1_STASTRE);
+ }
+ npcm_i2c_check_sda(bus);
+ npcm_i2c_send_stop(bus, false);
+ *data = readb(®->sda);
+ /* this must be done to generate STOP condition */
+ writeb(SMBST_NEGACK, ®->st);
+ } else {
+ for (i = 0; i < len; i++) {
+ /*
+ * When NEGACK bit is set to 1 after the transmission of a byte,
+ * SDAST is not set to 1.
+ */
+ if (i != (len - 1)) {
+ err = npcm_i2c_check_sda(bus);
+ } else {
+ err = readb_poll_timeout(®->ctl1, val,
+ !(val & SMBCTL1_ACK), 100000);
+ if (err) {
+ printf("wait nack timeout\n");
+ err = I2C_ERR_TIMEOUT;
+ npcm_dump_regs(bus);
+ }
+ }
+ if (err && err != I2C_ERR_TIMEOUT)
+ break;
+ if (i == (len - 2)) {
+ /* set NACK before last byte */
+ setbits_8(®->ctl1, SMBCTL1_ACK);
+ }
+ if (i == (len - 1)) {
+ /* last byte, send STOP condition */
+ npcm_i2c_send_stop(bus, false);
+ *data = readb(®->sda);
+ writeb(SMBST_NEGACK, ®->st);
+ break;
+ }
+ *data = readb(®->sda);
+ data++;
+ }
+ }
+
+ return err;
+}
+
+static int npcm_i2c_send_bytes(struct npcm_i2c_bus *bus, u8 *data, int len)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ u8 val;
+ int i;
+ int err = 0;
+
+ val = readb(®->st);
+ if (val & SMBST_NEGACK)
+ return I2C_ERR_NACK;
+ else if (val & SMBST_BER)
+ return I2C_ERR_BER;
+
+ /* clear STASTRE if it is set */
+ if (readb(®->ctl1) & SMBCTL1_STASTRE)
+ clrbits_8(®->ctl1, SMBCTL1_STASTRE);
+
+ for (i = 0; i < len; i++) {
+ err = npcm_i2c_check_sda(bus);
+ if (err)
+ break;
+ writeb(*data, ®->sda);
+ data++;
+ }
+ npcm_i2c_check_sda(bus);
+
+ return err;
+}
+
+static int npcm_i2c_read(struct npcm_i2c_bus *bus, u32 addr, u8 *data,
+ u32 len)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ int err;
+ bool stall;
+
+ if (len <= 0)
+ return -EINVAL;
+
+ /* send START condition */
+ err = npcm_i2c_send_start(bus);
+ if (err) {
+ debug("%s: send START err %d\n", __func__, err);
+ return err;
+ }
+
+ stall = (len == 1) ? true : false;
+ /* send address byte */
+ err = npcm_i2c_send_address(bus, (u8)(addr << 1) | 0x1, stall);
+
+ if (!err && len)
+ npcm_i2c_read_bytes(bus, data, len);
+
+ if (err == I2C_ERR_NACK) {
+ /* clear NACK */
+ writeb(SMBST_NEGACK, ®->st);
+ }
+
+ if (err)
+ debug("%s: err %d\n", __func__, err);
+
+ return err;
+}
+
+static int npcm_i2c_write(struct npcm_i2c_bus *bus, u32 addr, u8 *data,
+ u32 len)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ int err;
+ bool stall;
+
+ /* send START condition */
+ err = npcm_i2c_send_start(bus);
+ if (err) {
+ debug("%s: send START err %d\n", __func__, err);
+ return err;
+ }
+
+ stall = (len == 0) ? true : false;
+ /* send address byte */
+ err = npcm_i2c_send_address(bus, (u8)(addr << 1), stall);
+
+ if (!err && len)
+ err = npcm_i2c_send_bytes(bus, data, len);
+
+ /* clear STASTRE if it is set */
+ if (stall)
+ clrbits_8(®->ctl1, SMBCTL1_STASTRE);
+
+ if (err)
+ debug("%s: err %d\n", __func__, err);
+
+ return err;
+}
+
+static int npcm_i2c_xfer(struct udevice *dev,
+ struct i2c_msg *msg, int nmsgs)
+{
+ struct npcm_i2c_bus *bus = dev_get_priv(dev);
+ struct npcm_i2c_regs *reg = bus->reg;
+ int ret = 0, err = 0;
+
+ if (nmsgs < 1 || nmsgs > 2) {
+ printf("%s: commands not support\n", __func__);
+ return -EREMOTEIO;
+ }
+ /* clear ST register */
+ writeb(0xFF, ®->st);
+
+ for ( ; nmsgs > 0; nmsgs--, msg++) {
+ if (msg->flags & I2C_M_RD)
+ err = npcm_i2c_read(bus, msg->addr, msg->buf,
+ msg->len);
+ else
+ err = npcm_i2c_write(bus, msg->addr, msg->buf,
+ msg->len);
+ if (err) {
+ debug("i2c_xfer: error %d\n", err);
+ ret = -EREMOTEIO;
+ break;
+ }
+ }
+
+ if (bus->started)
+ npcm_i2c_send_stop(bus, true);
+
+ if (err)
+ npcm_i2c_recovery(bus, msg->addr);
+
+ return ret;
+}
+
+static int npcm_i2c_init_clk(struct npcm_i2c_bus *bus, u32 bus_freq)
+{
+ struct npcm_i2c_regs *reg = bus->reg;
+ u32 freq = bus->apb_clk;
+ u32 sclfrq;
+ u8 hldt, val;
+
+ if (bus_freq > I2C_FREQ_100K) {
+ printf("Support standard mode only\n");
+ return -EINVAL;
+ }
+
+ /* SCLFRQ = T(SCL)/4/T(CLK) = FREQ(CLK)/4/FREQ(SCL) */
+ sclfrq = freq / (bus_freq * 4);
+ if (sclfrq < SCLFRQ_MIN || sclfrq > SCLFRQ_MAX)
+ return -EINVAL;
+
+ if (freq >= 40000000)
+ hldt = 17;
+ else if (freq >= 12500000)
+ hldt = 15;
+ else
+ hldt = 7;
+
+ val = readb(®->ctl2) & 0x1;
+ val |= (sclfrq & 0x7F) << 1;
+ writeb(val, ®->ctl2);
+
+ /* clear 400K_MODE bit */
+ val = readb(®->ctl3) & 0xc;
+ val |= (sclfrq >> 7) & 0x3;
+ writeb(val, ®->ctl3);
+
+ writeb(hldt, ®->bank0.ctl4);
+
+ return 0;
+}
+
+static int npcm_i2c_set_bus_speed(struct udevice *dev,
+ unsigned int speed)
+{
+ struct npcm_i2c_bus *bus = dev_get_priv(dev);
+
+ return npcm_i2c_init_clk(bus, speed);
+}
+
+static int npcm_i2c_probe(struct udevice *dev)
+{
+ struct npcm_i2c_bus *bus = dev_get_priv(dev);
+ struct npcm_gcr *gcr = (struct npcm_gcr *)NPCM_GCR_BA;
+ struct npcm_i2c_regs *reg;
+ u32 i2csegctl_val = dev_get_driver_data(dev);
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret) {
+ printf("%s: ret %d\n", __func__, ret);
+ return ret;
+ }
+ bus->apb_clk = clk_get_rate(&clk);
+ if (bus->apb_clk <= 0) {
+ printf("%s: fail to get rate\n", __func__);
+ return -EINVAL;
+ }
+ clk_free(&clk);
+
+ bus->num = dev->seq_;
+ bus->reg = dev_read_addr_ptr(dev);
+ bus->freq = dev_read_u32_default(dev, "clock-frequency", 100000);
+ bus->started = false;
+ reg = bus->reg;
+
+ if (npcm_i2c_init_clk(bus, bus->freq)) {
+ printf("%s: init_clk failed\n", __func__);
+ return -EINVAL;
+ }
+
+ /* set initial i2csegctl value */
+ writel(i2csegctl_val, &gcr->i2csegctl);
+
+ /* enable SMB module */
+ setbits_8(®->ctl2, SMBCTL2_ENABLE);
+
+ /* select register bank 0 */
+ clrbits_8(®->ctl3, SMBCTL3_BNK_SEL);
+
+ /* single byte mode */
+ clrbits_8(®->bank0.fif_ctl, SMBFIF_CTL_FIFO_EN);
+
+ /* set POLL mode */
+ writeb(0, ®->ctl1);
+
+ printf("I2C bus %d ready. speed=%d, base=0x%x, apb=%u\n",
+ bus->num, bus->freq, (u32)(uintptr_t)bus->reg, bus->apb_clk);
+
+ return 0;
+}
+
+static const struct dm_i2c_ops nuvoton_i2c_ops = {
+ .xfer = npcm_i2c_xfer,
+ .set_bus_speed = npcm_i2c_set_bus_speed,
+};
+
+static const struct udevice_id nuvoton_i2c_of_match[] = {
+ { .compatible = "nuvoton,npcm845-i2c", .data = NPCM8XX_I2CSEGCTL_INIT_VAL},
+ { .compatible = "nuvoton,npcm750-i2c", .data = NPCM7XX_I2CSEGCTL_INIT_VAL},
+ {}
+};
+
+U_BOOT_DRIVER(npcm_i2c_bus) = {
+ .name = "npcm-i2c",
+ .id = UCLASS_I2C,
+ .of_match = nuvoton_i2c_of_match,
+ .probe = npcm_i2c_probe,
+ .priv_auto = sizeof(struct npcm_i2c_bus),
+ .ops = &nuvoton_i2c_ops,
+};
+
--
2.17.1
