May 2022 - U-Boot

[PATCH] arm: dts: socfpga: agilex: Add freeze controller node
by dinesh.maniyam＠intel.com 16 Jun '22

16 Jun '22

From: Dinesh Maniyam <dinesh.maniyam(a)intel.com> The freeze controller is required for FPGA partial reconfig. This node is disable on default. Enable this node via u-boot fdt command when needed. Signed-off-by: Yau Wai Gan <yau.wai.gan(a)intel.com> Signed-off-by: Dinesh Maniyam <dinesh.maniyam(a)intel.com> --- arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi index 6cac36a1fc..2400fad18a 100644 --- a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi +++ b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi @@ -2,7 +2,7 @@ /* * U-Boot additions * - * Copyright (C) 2019 Intel Corporation <www.intel.com> + * Copyright (C) 2019-2022 Intel Corporation <www.intel.com> */ #include "socfpga_agilex-u-boot.dtsi" @@ -11,6 +11,15 @@ aliases { spi0 = &qspi; i2c0 = &i2c1; + freeze_br0 = &freeze_controller; + }; + + soc { + freeze_controller: freeze_controller@f9000450 { + compatible = "altr,freeze-bridge-controller"; + reg = <0xf9000450 0x00000010>; + status = "disabled"; + }; }; memory { -- 2.26.2

2 1

[PATCH v2 00/11] Add Chameleon v3 support
by Paweł Anikiel 16 Jun '22

16 Jun '22

The Google Chameleon v3 is a board made for testing both video and audio interfaces of external devices. It has a connector compatible with the Mercury+ AA1 module, which itself contains an Arria 10 SoCFPGA. The AA1 module comes in a few different configurations, the Chameleon V3 supports ME-AA1-270-3E4-D11 and ME-AA1-480-2I3-D12E. This patchset adds support for the Chameleon v3 (both versions), as well as some bugfixes and optimizations, mostly in Arria 10 code. V2: Adjust devicetrees so that they work both in u-boot and linux Put u-boot-specific parts of devicetrees into *-u-boot.dtsi files Minor changes in Kconfig, defconfig, and config.h Paweł Anikiel (11): arm: dts: Add Mercury+ AA1 devicetrees arm: dts: Add Chameleonv3 handoff headers arm: dts: Add Chameleonv3 devicetrees board: Add Chameleonv3 board dir config: Add Chameleonv3 config misc: atsha204a: Increase wake delay by tWHI sysreset: socfpga: Use parent device for reading base address socfpga: arria10: Replace delays with busy waiting in cm_full_cfg socfpga: arria10: Improve bitstream loading speed socfpga: arria10: Wait for fifo empty after writing bitstream socfpga: arria10: Allow dcache_enable before relocation arch/arm/dts/Makefile | 2 + arch/arm/dts/socfpga_arria10_chameleonv3.dts | 90 ++++++ ...fpga_arria10_chameleonv3_270_3-u-boot.dtsi | 8 + .../dts/socfpga_arria10_chameleonv3_270_3.dts | 5 + ...ocfpga_arria10_chameleonv3_270_3_handoff.h | 305 ++++++++++++++++++ ...fpga_arria10_chameleonv3_480_2-u-boot.dtsi | 8 + .../dts/socfpga_arria10_chameleonv3_480_2.dts | 5 + ...ocfpga_arria10_chameleonv3_480_2_handoff.h | 305 ++++++++++++++++++ .../socfpga_arria10_mercury_aa1-u-boot.dtsi | 54 ++++ arch/arm/dts/socfpga_arria10_mercury_aa1.dtsi | 72 +++++ arch/arm/mach-socfpga/Kconfig | 7 + arch/arm/mach-socfpga/clock_manager.c | 7 +- arch/arm/mach-socfpga/clock_manager_arria10.c | 12 +- .../mach-socfpga/include/mach/clock_manager.h | 4 + arch/arm/mach-socfpga/misc_arria10.c | 26 ++ board/google/chameleonv3/Makefile | 5 + board/google/chameleonv3/board.c | 27 ++ board/google/chameleonv3/fpga.its | 28 ++ board/google/chameleonv3/fpga_early_io.its | 35 ++ board/google/chameleonv3/mercury_aa1.c | 43 +++ board/google/chameleonv3/mercury_aa1.h | 12 + configs/socfpga_chameleonv3_defconfig | 29 ++ drivers/fpga/socfpga_arria10.c | 28 +- drivers/misc/atsha204a-i2c.c | 5 +- drivers/sysreset/sysreset_socfpga.c | 2 +- include/configs/socfpga_chameleonv3.h | 44 +++ 26 files changed, 1154 insertions(+), 14 deletions(-) create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3.dts create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_270_3-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_270_3.dts create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_270_3_handoff.h create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_480_2-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_480_2.dts create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_480_2_handoff.h create mode 100644 arch/arm/dts/socfpga_arria10_mercury_aa1-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_arria10_mercury_aa1.dtsi create mode 100644 board/google/chameleonv3/Makefile create mode 100644 board/google/chameleonv3/board.c create mode 100644 board/google/chameleonv3/fpga.its create mode 100644 board/google/chameleonv3/fpga_early_io.its create mode 100644 board/google/chameleonv3/mercury_aa1.c create mode 100644 board/google/chameleonv3/mercury_aa1.h create mode 100644 configs/socfpga_chameleonv3_defconfig create mode 100644 include/configs/socfpga_chameleonv3.h -- 2.36.1.124.g0e6072fb45-goog

3 26

[PATCH v2 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+
by Josua Mayer 15 Jun '22

15 Jun '22

As of Revision 1.9 the SolidRun i.MX6 SoMs ship with a new PHY - an ADIN1300 at address 1. This patchset carries many small parts to facilitate proper operation of the ethernet port in U-Boot as well as Linux: 1. Fix a compile error in the recently added phy driver 2. Add support for configuring the clock output pins to the phy driver 3. update device-tree with support for the new phy 4. support runtime patching of device-tree for Linux: enable only the phy node detected during boot, to avoid warning messages when Linux probes the phys. 5. finally enable the phy driver in the cuboxi defconfig I have included Nate's patch here only so that it won't get lost - it is fully independent and I have not made any changes. Changes since v1: - applied proper compile fix by Nate Drude - removed -recovered clock options as requested by Linux maintainers Josua Mayer (4): phy: adin: add support for clock output ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS mx6cuboxi: enable driver for adin1300 phy Nate Drude (1): phy: adin: fix broken support for adi,phy-mode-override arch/arm/dts/imx6qdl-sr-som.dtsi | 17 +++++- board/solidrun/mx6cuboxi/mx6cuboxi.c | 78 ++++++++++++++++++++++++++++ configs/mx6cuboxi_defconfig | 2 + drivers/net/phy/adin.c | 64 +++++++++++++++++++---- 4 files changed, 148 insertions(+), 13 deletions(-) -- 2.35.3

3 13

[PATCH 1/2] toradex: tdx-cfg-block: add new 8gb apalis-imx8
by Philippe Schenker 15 Jun '22

15 Jun '22

From: Philippe Schenker <philippe.schenker(a)toradex.com> 0067: Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT This module is identical to its 4GB counterpart 0037: Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT except for the RAM size. Signed-off-by: Philippe Schenker <philippe.schenker(a)toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini(a)toradex.com> --- board/toradex/common/tdx-cfg-block.c | 18 ++++++++++++++++-- board/toradex/common/tdx-cfg-block.h | 1 + 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c index 9c87289ae9..6c8cf4592d 100644 --- a/board/toradex/common/tdx-cfg-block.c +++ b/board/toradex/common/tdx-cfg-block.c @@ -144,6 +144,7 @@ const char * const toradex_modules[] = { [64] = "Verdin iMX8M Plus Quad 2GB Wi-Fi / BT IT", [65] = "Verdin iMX8M Plus QuadLite 1GB IT", [66] = "Verdin iMX8M Plus Quad 8GB Wi-Fi / BT", + [67] = "Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT", }; const char * const toradex_carrier_boards[] = { @@ -359,6 +360,7 @@ static int get_cfgblock_interactive(void) char *soc; char it = 'n'; char wb = 'n'; + char mem8g = 'n'; int len = 0; /* Unknown module by default */ @@ -377,6 +379,14 @@ static int get_cfgblock_interactive(void) sprintf(message, "Does the module have Wi-Fi / Bluetooth? [y/N] "); len = cli_readline(message); wb = console_buffer[0]; + +#if defined(CONFIG_TARGET_APALIS_IMX8) + if ((wb == 'y' || wb == 'Y') && (it == 'y' || it == 'Y')) { + sprintf(message, "Does your module have 8GB of RAM? [y/N] "); + len = cli_readline(message); + mem8g = console_buffer[0]; + } +#endif #endif soc = env_get("soc"); @@ -430,8 +440,12 @@ static int get_cfgblock_interactive(void) tdx_hw_tag.prodid = COLIBRI_IMX7S; else if (is_cpu_type(MXC_CPU_IMX8QM)) { if (it == 'y' || it == 'Y') { - if (wb == 'y' || wb == 'Y') - tdx_hw_tag.prodid = APALIS_IMX8QM_WIFI_BT_IT; + if (wb == 'y' || wb == 'Y') { + if (mem8g == 'y' || mem8g == 'Y') + tdx_hw_tag.prodid = APALIS_IMX8QM_8GB_WIFI_BT_IT; + else + tdx_hw_tag.prodid = APALIS_IMX8QM_WIFI_BT_IT; + } else tdx_hw_tag.prodid = APALIS_IMX8QM_IT; } else { diff --git a/board/toradex/common/tdx-cfg-block.h b/board/toradex/common/tdx-cfg-block.h index ddcf699748..43e662e41d 100644 --- a/board/toradex/common/tdx-cfg-block.h +++ b/board/toradex/common/tdx-cfg-block.h @@ -87,6 +87,7 @@ enum { VERDIN_IMX8MPQ_2GB_WIFI_BT_IT, VERDIN_IMX8MPQL_IT, /* 65 */ VERDIN_IMX8MPQ_8GB_WIFI_BT, + APALIS_IMX8QM_8GB_WIFI_BT_IT, }; enum { -- 2.35.1

4 8

[PATCH] imx8mn_evk: Add the missing spl.bin entry
by Fabio Estevam 15 Jun '22

15 Jun '22

From: Fabio Estevam <festevam(a)denx.de> The generated flash.bin does not boot the imx8mn evk LPDDR4 variant as it misses the spl.bin description in binman. Add its entry to fix the boot on the imx8mn evk LPDDR4 variant. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- arch/arm/dts/imx8mn-evk-u-boot.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/imx8mn-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-evk-u-boot.dtsi index 3db46d4cbc..593cf06eb9 100644 --- a/arch/arm/dts/imx8mn-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-evk-u-boot.dtsi @@ -58,7 +58,9 @@ }; - flash { + spl { + filename = "spl.bin"; + mkimage { args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000"; -- 2.25.1

5 4

[PATCH v2] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output
by Marcel Ziswiler 15 Jun '22

15 Jun '22

From: Philippe Schenker <philippe.schenker(a)toradex.com> systemd prints its messages on the last console= statement that it finds in the kernel arguments. The current ordering sends the systemd messages to tty1, by default this is the display. Ensure that systemd sends its messages to the default UART, reorder the console= statements accordingly. Signed-off-by: Philippe Schenker <philippe.schenker(a)toradex.com> Reviewed-by: Stefano Babic <sbabic(a)denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> --- Changes in v2: - Added Stefano's reviewed-by tag. - Added my acked-by tag. - Re-based on top of Stefano's master-next. include/configs/verdin-imx8mm.h | 4 ++-- include/configs/verdin-imx8mp.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index cd950ad055e..558b78115df 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -58,8 +58,8 @@ "fdt_board=dev\0" \ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "setup=setenv setupargs console=${console},${baudrate} " \ - "console=tty1 consoleblank=0 earlycon\0" \ + "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \ + "consoleblank=0 earlycon\0" \ "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \ "if test \"$confirm\" = \"y\"; then " \ "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 470f64d5a74..52fa2be3ab1 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -75,7 +75,7 @@ "fdt_board=dev\0" \ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "setup=setenv setupargs console=${console},${baudrate} console=tty1 " \ + "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \ "consoleblank=0 earlycon\0" \ "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \ "if test \"$confirm\" = \"y\"; then " \ -- 2.35.1

2 1

[PATCH] imx8mn_evk: Add Ethernet support to the LPDDR4 variant
by Fabio Estevam 15 Jun '22

15 Jun '22

From: Fabio Estevam <festevam(a)denx.de> The imx8mn-ddr4-evk board has Ethernet support already, but the lpddr4 board does not. Add Ethernet support for the LPDDR4 variant too. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- configs/imx8mn_evk_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig index c18c19fa140f..52954b046384 100644 --- a/configs/imx8mn_evk_defconfig +++ b/configs/imx8mn_evk_defconfig @@ -46,6 +46,9 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y @@ -70,7 +73,12 @@ CONFIG_MMC_HS400_SUPPORT=y CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y CONFIG_DM_ETH=y +CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC=y +CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y -- 2.25.1

2 1

[PATCH 1/2] dt-bindings: sound: add microchip,pdmc.h
by Eugen Hristev 15 Jun '22

15 Jun '22

Include microchip,pdmc.h from Linux. This file includes required defines for DT successful build. Signed-off-by: Eugen Hristev <eugen.hristev(a)microchip.com> --- include/dt-bindings/sound/microchip,pdmc.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 include/dt-bindings/sound/microchip,pdmc.h diff --git a/include/dt-bindings/sound/microchip,pdmc.h b/include/dt-bindings/sound/microchip,pdmc.h new file mode 100644 index 0000000000..96cde94ce7 --- /dev/null +++ b/include/dt-bindings/sound/microchip,pdmc.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_BINDINGS_MICROCHIP_PDMC_H__ +#define __DT_BINDINGS_MICROCHIP_PDMC_H__ + +/* PDM microphone's pin placement */ +#define MCHP_PDMC_DS0 0 +#define MCHP_PDMC_DS1 1 + +/* PDM microphone clock edge sampling */ +#define MCHP_PDMC_CLK_POSITIVE 0 +#define MCHP_PDMC_CLK_NEGATIVE 1 + +#endif /* __DT_BINDINGS_MICROCHIP_PDMC_H__ */ -- 2.25.1

2 2

[PATCH] tbs2910: Convert to DM_SERIAL
by Fabio Estevam 14 Jun '22

14 Jun '22

From: Fabio Estevam <festevam(a)denx.de> Conversion to DM_SERIAL is mandatory. Select DM_SERIAL and add a imx6q-tbs2910-u-boot.dtsi file that describes the nodes that require dm-pre-reloc, which allows the DM model to configure the UART pinctrl early. Remove the now unneeded board UART initialization. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- arch/arm/dts/imx6q-tbs2910-u-boot.dtsi | 17 +++++++++++++++++ arch/arm/dts/imx6qdl.dtsi | 4 ++-- board/tbs/tbs2910/tbs2910.c | 26 -------------------------- configs/tbs2910_defconfig | 2 +- 4 files changed, 20 insertions(+), 29 deletions(-) create mode 100644 arch/arm/dts/imx6q-tbs2910-u-boot.dtsi diff --git a/arch/arm/dts/imx6q-tbs2910-u-boot.dtsi b/arch/arm/dts/imx6q-tbs2910-u-boot.dtsi new file mode 100644 index 000000000000..65ab052ac2c0 --- /dev/null +++ b/arch/arm/dts/imx6q-tbs2910-u-boot.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ + +&aips1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; + +&soc { + u-boot,dm-pre-reloc; +}; + +&uart1 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi index efd89510d512..d89272039b28 100644 --- a/arch/arm/dts/imx6qdl.dtsi +++ b/arch/arm/dts/imx6qdl.dtsi @@ -139,7 +139,7 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -283,7 +283,7 @@ status = "disabled"; }; - bus@2000000 { /* AIPS1 */ + aips1: bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c index faf73cc218c9..3a447ca8a93c 100644 --- a/board/tbs/tbs2910/tbs2910.c +++ b/board/tbs/tbs2910/tbs2910.c @@ -22,32 +22,12 @@ #include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -static iomux_v3_cfg_t const uart2_pads[] = { - MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - int dram_init(void) { gd->ram_size = 2048ul * 1024 * 1024; return 0; } -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); - imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); -} - #ifdef CONFIG_FSL_ESDHC_IMX /* set environment device to boot device when booting from SD */ int board_mmc_get_env_dev(int devno) @@ -150,12 +130,6 @@ static void setup_display(void) } #endif /* CONFIG_VIDEO_IPUV3 */ -int board_early_init_f(void) -{ - setup_iomux_uart(); - return 0; -} - #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 8a3316056408..63a778a45f0b 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -23,7 +23,6 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi" CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb" CONFIG_PRE_CONSOLE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Matrix U-Boot> " # CONFIG_CMD_BDI is not set @@ -81,6 +80,7 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_RTC=y CONFIG_RTC_DS1307=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_IMX_THERMAL=y -- 2.25.1

4 8

[PATCH 1/2] pmic: pca9450: add DM_I2C dependencies in Kconfig
by Rasmus Villemoes 14 Jun '22

14 Jun '22

The pca9450 driver uses dm_i2c_{read,write}, which are (unsurprisingly) only available with DM_I2C. Make sure one can't create an unbuildable .config by adding proper dependencies. While here, append "in SPL" to the prompt for the SPL_ variant so it doesn't read the same as the one for the non-SPL_ variant. Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> --- drivers/power/pmic/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 953c92e212..6c534aead7 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -158,13 +158,15 @@ config SPL_DM_PMIC_MP5416 config DM_PMIC_PCA9450 bool "Enable Driver Model for PMIC PCA9450" + depends on DM_I2C help This config enables implementation of driver-model pmic uclass features for PMIC PCA9450. The driver implements read/write operations. config SPL_DM_PMIC_PCA9450 - bool "Enable Driver Model for PMIC PCA9450" + bool "Enable Driver Model for PMIC PCA9450 in SPL" depends on SPL_DM_PMIC + depends on SPL_DM_I2C help This config enables implementation of driver-model pmic uclass features for PMIC PCA9450 in SPL. The driver implements read/write operations. -- 2.31.1

2 6