December 2022 - U-Boot

[PATCH] configs: r8a77980: Condor: Enable MMC support by default
by Marek Vasut 22 Dec '22

22 Dec '22

From: Andrey Dolnikov <andrey.dolnikov(a)cogentembedded.com> This enables MMC support, which is available on Condor board, by default. Signed-off-by: Andrey Dolnikov <andrey.dolnikov(a)cogentembedded.com> Signed-off-by: Valentine Barshak <valentine.barshak(a)cogentembedded.com> Signed-off-by: Hai Pham <hai.pham.ud(a)renesas.com> --- configs/r8a77980_condor_defconfig | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/configs/r8a77980_condor_defconfig b/configs/r8a77980_condor_defconfig index 1983c8a2db..7110d6e2ba 100644 --- a/configs/r8a77980_condor_defconfig +++ b/configs/r8a77980_condor_defconfig @@ -36,6 +36,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y @@ -63,7 +64,11 @@ CONFIG_DFU_SF=y CONFIG_RCAR_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_RCAR_I2C=y -# CONFIG_MMC is not set +CONFIG_DM_MMC=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y -- 2.35.1

1 0

[PATCH] ARM: renesas: condor: switch eMMC bus to 1V8
by Marek Vasut 22 Dec '22

22 Dec '22

From: Hai Pham <hai.pham.ud(a)renesas.com> The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND array and the VCCQ supplies the bus. On Condor, the VCC is connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux to match the bus, which is always operating in 1.8V mode. Based on Linux commit 69efe4bbeda50745 ("arm64: dts: renesas: condor: Switch eMMC bus to 1V8") from Wolfram Sang Signed-off-by: Hai Pham <hai.pham.ud(a)renesas.com> --- arch/arm/dts/r8a77980-condor.dts | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts index 3dde028e22..f0a0a51d73 100644 --- a/arch/arm/dts/r8a77980-condor.dts +++ b/arch/arm/dts/r8a77980-condor.dts @@ -212,7 +212,7 @@ &mmc0 { pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins_uhs>; + pinctrl-1 = <&mmc_pins>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <&d3_3v>; @@ -253,12 +253,6 @@ }; mmc_pins: mmc { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; - power-source = <3300>; - }; - - mmc_pins_uhs: mmc_uhs { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; power-source = <1800>; -- 2.35.1

1 0

[PATCH] ARM: dts: renesas: condor: Enable SPI NOR fast-read
by Marek Vasut 22 Dec '22

22 Dec '22

From: Marek Vasut <marek.vasut+renesas(a)gmail.com> This board requires SPI NOR fast-read, otherwise the SPI NOR access returns corrupted data. Enable the fast-read explicitly in DT as it has been disabled in the MTD subsystem by commit d008190920 ("mtd: spi-nor: Mask out fast read if not requested in DT") Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> --- arch/arm/dts/r8a77980-condor-u-boot.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/r8a77980-condor-u-boot.dts b/arch/arm/dts/r8a77980-condor-u-boot.dts index 1b22c7f0b9..576a74e603 100644 --- a/arch/arm/dts/r8a77980-condor-u-boot.dts +++ b/arch/arm/dts/r8a77980-condor-u-boot.dts @@ -25,6 +25,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "s25fs512s", "jedec,spi-nor"; + m25p,fast-read; spi-max-frequency = <50000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; -- 2.35.1

1 0

[PATCH v2 13/14] rockchip: Enable bootstage on rockpro64
by Simon Glass 22 Dec '22

22 Dec '22

This board is useful for benchmarking overall U-Boot performance. Enable the bootstage feature so we get a report. Since this returns to the boot rom before finishing executing board_init_r() in SPL, add a few bootstage calls so that we can collect timing from TPL. For the stash region, use a portion of SRAM, 64KB below the stack top. This allows the TPL image to be up to nearly 120KB (it is typically about 64KB). SPL normally runs from SDRAM at 0, so can use the same stash region. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: - Drop debugging statements - Update the comment to indicate why the timer is set up first arch/arm/mach-rockchip/tpl.c | 16 +++++++++++++--- configs/rockpro64-rk3399_defconfig | 8 ++++++++ 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c index ed46a9ad286..40cf9f0e79c 100644 --- a/arch/arm/mach-rockchip/tpl.c +++ b/arch/arm/mach-rockchip/tpl.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <bootstage.h> #include <debug_uart.h> #include <dm.h> #include <hang.h> @@ -70,15 +71,15 @@ void board_init_f(ulong dummy) U_BOOT_TIME ")\n"); #endif #endif + /* Init secure timer before setting up bootstage */ + rockchip_stimer_init(); + ret = spl_early_init(); if (ret) { debug("spl_early_init() failed: %d\n", ret); hang(); } - /* Init secure timer */ - rockchip_stimer_init(); - /* Init ARM arch timer */ if (IS_ENABLED(CONFIG_SYS_ARCH_TIMER)) timer_init(); @@ -93,6 +94,15 @@ void board_init_f(ulong dummy) int board_return_to_bootrom(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { +#ifdef CONFIG_BOOTSTAGE_STASH + int ret; + + bootstage_mark_name(BOOTSTAGE_ID_END_TPL, "end tpl"); + ret = bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR, + CONFIG_BOOTSTAGE_STASH_SIZE); + if (ret) + debug("Failed to stash bootstage: err=%d\n", ret); +#endif back_to_bootrom(BROM_BOOT_NEXTSTAGE); return 0; diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig index 5b8d678f6bb..2f1ae156bd4 100644 --- a/configs/rockpro64-rk3399_defconfig +++ b/configs/rockpro64-rk3399_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" CONFIG_ROCKCHIP_RK3399=y CONFIG_TARGET_ROCKPRO64_RK3399=y +CONFIG_BOOTSTAGE_STASH_ADDR=0xff8e0000 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -17,6 +18,12 @@ CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 +CONFIG_BOOTSTAGE=y +CONFIG_SPL_BOOTSTAGE=y +CONFIG_TPL_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10 +CONFIG_BOOTSTAGE_STASH=y CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -40,6 +47,7 @@ CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_SPI_FLASH=y -- 2.39.0.314.g84b9a713c41-goog

1 0

[PATCH 1/6] ARM: renesas: Enable LTO on R-Car3 ULCB
by Marek Vasut 22 Dec '22

22 Dec '22

From: Marek Vasut <marek.vasut+renesas(a)gmail.com> Enable LTO (link time optimization) to improve optimization and reduce code size by cca. 31 kiB. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> --- configs/rcar3_ulcb_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig index 729fbde18f..1e964880f6 100644 --- a/configs/rcar3_ulcb_defconfig +++ b/configs/rcar3_ulcb_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0xe6338000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_ULCB=y CONFIG_SYS_LOAD_ADDR=0x58000000 +CONFIG_LTO=y CONFIG_REMAKE_ELF=y CONFIG_SYS_MONITOR_LEN=1048576 CONFIG_FIT=y -- 2.35.1

1 5

[PATCH] ARM: renesas: condor: Set CONFIG_TEXT_BASE=0x0 on R-Car Gen3 Condor
by marek.vasut＠gmail.com 22 Dec '22

22 Dec '22

From: Marek Vasut <marek.vasut+renesas(a)gmail.com> Since R-Car Gen3 already enables position independent build, also set CONFIG_TEXT_BASE=0x0 to finalize the switch. This is possible since 534f0fbd65 ("arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y") fixed current env_get_char() crash with CONFIG_TEXT_BASE=0x0 . This change permits us to start U-Boot from any location in DRAM instead of specific TEXT_BASE. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> --- configs/r8a77980_condor_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/r8a77980_condor_defconfig b/configs/r8a77980_condor_defconfig index 7110d6e2ba..d2aeb9629b 100644 --- a/configs/r8a77980_condor_defconfig +++ b/configs/r8a77980_condor_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_RMOBILE=y -CONFIG_TEXT_BASE=0x50000000 +CONFIG_TEXT_BASE=0x0 CONFIG_SYS_MALLOC_LEN=0x4000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x40000 -- 2.35.1

1 0

[PATCH] ARM: renesas: ulcb: Set CONFIG_TEXT_BASE=0x0 on R-Car Gen3 ULCB
by marek.vasut＠gmail.com 22 Dec '22

22 Dec '22

From: Marek Vasut <marek.vasut+renesas(a)gmail.com> Since R-Car Gen3 already enables position independent build, also set CONFIG_TEXT_BASE=0x0 to finalize the switch. This is possible since 534f0fbd65 ("arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y") fixed current env_get_char() crash with CONFIG_TEXT_BASE=0x0 . This change permits us to start U-Boot from any location in DRAM instead of specific TEXT_BASE. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> --- configs/rcar3_ulcb_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig index 43361a286f..729fbde18f 100644 --- a/configs/rcar3_ulcb_defconfig +++ b/configs/rcar3_ulcb_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_RMOBILE=y -CONFIG_TEXT_BASE=0x50000000 +CONFIG_TEXT_BASE=0x0 CONFIG_SYS_MALLOC_LEN=0x4000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x20000 -- 2.35.1

1 0

[PATCH v7 00/12] binman: rockchip: Migrate from rockchip SPL_FIT_GENERATOR script
by Simon Glass 22 Dec '22

22 Dec '22

At present rockchip 64-bit boards make use of a FIT-generator script written in Python. The script supports splitting an ELF file into several 'loadable' nodes in the FIT. Binman does not current support this feature. This series adds binman support for ELF splitting. This works by adding a new 'fit,operation' property to the FIT subnodes, allowing this new way of generating nodes. It also provides support for optional entries, by allowing them to be marked absent when the contents are obtained. Some other fixes and improvements are needed along the way. A new, common binman description is added for 64-bit boards which includes the required u-boot.itb file. The existing script is removed, so that only a few zynq boards are now using a SPL_FIT_GENERATOR script: avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0 xilinx_zynqmp_virt Migration of those is hopefully in progress. Note however that tools/k3_fit_atf.sh remains, used by a few boards that enable CONFIG_TI_SECURE_DEVICE so this series is copied there too: am335x_hs_evm am335x_hs_evm_uart am43xx_hs_evm am57xx_hs_evm am57xx_hs_evm_usb am65x_hs_evm_a53 am65x_hs_evm_r5 dra7xx_hs_evm dra7xx_hs_evm_usb j721e_hs_evm_a72 j721e_hs_evm_r5 k2e_hs_evm k2g_hs_evm k2hk_hs_evm k2l_hs_evm Ivan Mikhaylov has sent a patch to help with these, but I need to take a look at the testing side. In any case they should really be using binman for the image generation. Changes in v7: - Correct an rST formatting error - Correct missing test coverage Changes in v6: - Add new patch to update entry docs - Update op-tee to support new v1 binary header - Add new patch to disable USE_SPL_FIT_GENERATOR by default - Add new patch to allow a binman entry to be marked absent Changes in v5: - Update commit message to mention using parts of one image in another - Rename from 'Include binman script in 64-bit boards' - Drop duplicate #include in rk3368-u-boot.dtsi - Keep the name as fit for puma - Drop redundant check for CONFIG_ROCKCHIP_SPI_IMAGE - Drop imply of BINMAN in Kconfig (rely on ARCH_ROCKCHIP instead) - Rename blob to fit for puma and also SPI image Changes in v3: - Add an offset to the FIT description - Add support for writing sections in binman - Rebase to master Changes in v2: - Rename op-tee to tee-os - Drop use of .itb2 - Drop patches previously applied - Add various suggestions from Alper Nebi Yasak - Add patches to refactor binman's FIT support Simon Glass (12): binman: Allow writing section contents to a file binman: Tidy up comment in fit _gen_node binman: Update entry docs binman: Support optional entries binman: Add a way to check for a valid ELF file binman: Support new op-tee binary format rockchip: evb-rk3288: Drop raw-image support rockchip: Use multiple-images for rk3399 rockchip: Support building the all output files in binman rockchip: Convert all boards to use binman rockchip: Drop the FIT generator script treewide: Disable USE_SPL_FIT_GENERATOR by default Makefile | 11 +- arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 4 +- arch/arm/dts/rk3399-u-boot.dtsi | 3 +- arch/arm/dts/rockchip-u-boot.dtsi | 76 ++++- arch/arm/mach-rockchip/make_fit_atf.py | 267 ------------------ boot/Kconfig | 6 +- configs/am335x_evm_defconfig | 1 - configs/am335x_hs_evm_defconfig | 1 - configs/am335x_hs_evm_uart_defconfig | 1 - configs/am43xx_evm_defconfig | 1 - configs/am43xx_evm_rtconly_defconfig | 1 - configs/am43xx_evm_usbhost_boot_defconfig | 1 - configs/am43xx_hs_evm_defconfig | 1 - configs/am57xx_evm_defconfig | 1 - configs/am57xx_hs_evm_defconfig | 1 - configs/am57xx_hs_evm_usb_defconfig | 1 - configs/am65x_evm_a53_defconfig | 1 - configs/am65x_evm_r5_defconfig | 1 - configs/am65x_hs_evm_a53_defconfig | 1 - configs/am65x_hs_evm_r5_defconfig | 1 - ...edev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 1 + configs/cgtqmx8_defconfig | 1 - configs/chromebook_link64_defconfig | 1 - configs/dh_imx6_defconfig | 1 - configs/display5_defconfig | 1 - configs/display5_factory_defconfig | 1 - configs/dra7xx_evm_defconfig | 1 - configs/dra7xx_hs_evm_defconfig | 1 - configs/dra7xx_hs_evm_usb_defconfig | 1 - configs/evb-ast2600_defconfig | 1 - configs/evb-rk3229_defconfig | 1 - configs/evb-rk3288_defconfig | 2 +- configs/gwventana_emmc_defconfig | 1 - configs/gwventana_gw5904_defconfig | 1 - configs/gwventana_nand_defconfig | 1 - configs/imx6qdl_icore_mipi_defconfig | 1 - configs/imx6qdl_icore_mmc_defconfig | 1 - configs/imx6qdl_icore_rqs_defconfig | 1 - configs/imx8mm-cl-iot-gate-optee_defconfig | 1 - configs/imx8mm-cl-iot-gate_defconfig | 1 - configs/imx8mm-icore-mx8mm-ctouch2_defconfig | 1 - configs/imx8mm-icore-mx8mm-edimm2.2_defconfig | 1 - configs/imx8mm-mx8menlo_defconfig | 1 - configs/imx8mm_beacon_defconfig | 1 - configs/imx8mm_data_modul_edm_sbc_defconfig | 1 - configs/imx8mm_evk_defconfig | 1 - configs/imx8mm_evk_fspi_defconfig | 1 - configs/imx8mm_venice_defconfig | 1 - configs/imx8mn_beacon_2g_defconfig | 1 - configs/imx8mn_beacon_defconfig | 1 - configs/imx8mn_bsh_smm_s2_defconfig | 1 - configs/imx8mn_bsh_smm_s2pro_defconfig | 1 - configs/imx8mn_ddr4_evk_defconfig | 1 - configs/imx8mn_evk_defconfig | 1 - configs/imx8mn_var_som_defconfig | 1 - configs/imx8mn_venice_defconfig | 1 - configs/imx8mp-icore-mx8mp-edimm2.2_defconfig | 1 - configs/imx8mp_dhcom_pdk2_defconfig | 1 - configs/imx8mp_evk_defconfig | 1 - configs/imx8mp_rsb3720a1_4G_defconfig | 1 - configs/imx8mp_rsb3720a1_6G_defconfig | 1 - configs/imx8mp_venice_defconfig | 1 - configs/imx8mq_cm_defconfig | 1 - configs/imx8mq_evk_defconfig | 1 - configs/imx8mq_phanbell_defconfig | 1 - configs/imx8qm_rom7720_a1_4G_defconfig | 1 - configs/iot2050_defconfig | 1 - configs/j7200_evm_a72_defconfig | 1 - configs/j7200_evm_r5_defconfig | 1 - configs/j7200_hs_evm_a72_defconfig | 1 - configs/j7200_hs_evm_r5_defconfig | 1 - configs/j721e_evm_a72_defconfig | 1 - configs/j721e_evm_r5_defconfig | 1 - configs/j721e_hs_evm_a72_defconfig | 1 - configs/j721e_hs_evm_r5_defconfig | 1 - configs/j721s2_evm_a72_defconfig | 1 - configs/j721s2_evm_r5_defconfig | 1 - configs/j721s2_hs_evm_a72_defconfig | 1 - configs/j721s2_hs_evm_r5_defconfig | 1 - configs/kontron-sl-mx6ul_defconfig | 1 - configs/kontron-sl-mx8mm_defconfig | 1 - configs/kontron_pitx_imx8m_defconfig | 1 - configs/kontron_sl28_defconfig | 1 - configs/librem5_defconfig | 1 - configs/ls1046ardb_qspi_spl_defconfig | 1 - configs/mccmon6_nor_defconfig | 1 - configs/mccmon6_sd_defconfig | 1 - configs/mx6sabreauto_defconfig | 1 - configs/mx6sabresd_defconfig | 1 - configs/phycore-imx8mm_defconfig | 1 - configs/phycore-imx8mp_defconfig | 1 - configs/pico-imx6_defconfig | 1 - configs/pico-imx8mq_defconfig | 1 - configs/qemu-x86_64_defconfig | 1 - configs/sandbox_noinst_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/sandbox_vpl_defconfig | 1 - configs/socfpga_agilex_atf_defconfig | 1 - configs/socfpga_agilex_vab_defconfig | 1 - configs/socfpga_arria10_defconfig | 1 - configs/socfpga_chameleonv3_defconfig | 1 - configs/socfpga_n5x_atf_defconfig | 1 - configs/socfpga_n5x_vab_defconfig | 1 - configs/socfpga_stratix10_atf_defconfig | 1 - configs/stm32mp15_dhcom_basic_defconfig | 1 - configs/stm32mp15_dhcor_basic_defconfig | 1 - configs/verdin-imx8mm_defconfig | 1 - configs/verdin-imx8mp_defconfig | 1 - configs/wandboard_defconfig | 1 - configs/xilinx_zynq_virt_defconfig | 1 - configs/xilinx_zynqmp_virt_defconfig | 1 + tools/binman/binman.rst | 27 ++ tools/binman/control.py | 1 + tools/binman/elf.py | 16 ++ tools/binman/elf_test.py | 10 + tools/binman/entries.rst | 206 ++++++++++++-- tools/binman/entry.py | 22 ++ tools/binman/etype/_testing.py | 3 + tools/binman/etype/fit.py | 85 +++--- tools/binman/etype/mkimage.py | 28 +- tools/binman/etype/section.py | 28 +- tools/binman/etype/tee_os.py | 68 ++++- tools/binman/ftest.py | 102 +++++++ tools/binman/image.py | 3 - tools/binman/test/261_section_fname.dts | 29 ++ tools/binman/test/262_absent.dts | 20 ++ tools/binman/test/263_tee_os_opt.dts | 22 ++ tools/binman/test/264_tee_os_opt_fit.dts | 33 +++ tools/binman/test/265_tee_os_opt_fit_bad.dts | 40 +++ 129 files changed, 753 insertions(+), 463 deletions(-) delete mode 100755 arch/arm/mach-rockchip/make_fit_atf.py create mode 100644 tools/binman/test/261_section_fname.dts create mode 100644 tools/binman/test/262_absent.dts create mode 100644 tools/binman/test/263_tee_os_opt.dts create mode 100644 tools/binman/test/264_tee_os_opt_fit.dts create mode 100644 tools/binman/test/265_tee_os_opt_fit_bad.dts -- 2.39.0.314.g84b9a713c41-goog

2 15

[PATCH 1/1] doc: improve wget man-page
by Heinrich Schuchardt 22 Dec '22

22 Dec '22

* correct formatting of synopsis * improve description of TCP SACK configuration Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- doc/usage/cmd/wget.rst | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/doc/usage/cmd/wget.rst b/doc/usage/cmd/wget.rst index 4fcfa03954..27c500837a 100644 --- a/doc/usage/cmd/wget.rst +++ b/doc/usage/cmd/wget.rst @@ -7,6 +7,7 @@ Synopsis -------- :: + wget address [[hostIPaddr:]path] Description @@ -52,8 +53,8 @@ Configuration The command is only available if CONFIG_CMD_WGET=y. -CONFIG_PROT_TCP_SACK can be turned on for the TCP SACK options. This will -help increasing the downloading speed. +TCP Selective Acknowledgments can be enabled via CONFIG_PROT_TCP_SACK=y. +This will improve the download speed. Return value ------------ -- 2.37.2

1 0

[PATCH v3] doc: add texinfodocs and infodocs targets
by Maxim Cournoyer 22 Dec '22

22 Dec '22

Sphinx supports generating Texinfo sources and Info documentation, which can be navigated easily and is convenient to search (via the indexed nodes or anchors, for example). This is basically the same as 1f050e904dd6f2955eecbd22031d912ccb2e7683, which was recently applied to the Linux kernel. Signed-off-by: Maxim Cournoyer <maxim.cournoyer(a)savoirfairelinux.com> --- Changes in v3: - Adjust texinfo target and direntry names, description in doc/conf.py - Equally adjust the man page name, for consistency Changes in v2: - Do not invoke nonexistent 'sphinx-pre-install' script Makefile | 2 +- doc/Makefile | 10 ++++++++++ doc/conf.py | 6 +++--- doc/media/Makefile | 3 ++- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index de5746399a..597a8886c3 100644 --- a/Makefile +++ b/Makefile @@ -2372,7 +2372,7 @@ tcheck: # Documentation targets # --------------------------------------------------------------------------- DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ - linkcheckdocs dochelp refcheckdocs + linkcheckdocs dochelp refcheckdocs texinfodocs infodocs PHONY += $(DOC_TARGETS) $(DOC_TARGETS): scripts_basic FORCE $(Q)$(MAKE) $(build)=doc $@ diff --git a/doc/Makefile b/doc/Makefile index f5de65e927..d0904a9f99 100644 --- a/doc/Makefile +++ b/doc/Makefile @@ -69,6 +69,14 @@ quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4) htmldocs: @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var))) +texinfodocs: + @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,texinfo,$(var),texinfo,$(var))) + +# Note: the 'info' Make target is generated by sphinx itself when +# running the texinfodocs target defined above. +infodocs: texinfodocs + $(MAKE) -C $(BUILDDIR)/texinfo info + linkcheckdocs: @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var))) @@ -109,6 +117,8 @@ cleandocs: dochelp: @echo ' U-Boot documentation in different formats from ReST:' @echo ' htmldocs - HTML' + @echo ' texinfodocs - Texinfo' + @echo ' infodocs - Info' @echo ' latexdocs - LaTeX' @echo ' pdfdocs - PDF' @echo ' epubdocs - EPUB' diff --git a/doc/conf.py b/doc/conf.py index 62c8d31270..3db70f80c1 100644 --- a/doc/conf.py +++ b/doc/conf.py @@ -449,7 +449,7 @@ for fn in os.listdir('.'): # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ - (master_doc, 'dasuboot', 'The U-Boot Documentation', + (master_doc, 'u-boot', 'The U-Boot Documentation', [author], 1) ] @@ -463,8 +463,8 @@ man_pages = [ # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ - (master_doc, 'DasUBoot', 'The U-Boot Documentation', - author, 'DasUBoot', 'One line description of project.', + (master_doc, 'u-boot', 'The U-Boot Documentation', + author, 'U-Boot', 'Boot loader for embedded systems', 'Miscellaneous'), ] diff --git a/doc/media/Makefile b/doc/media/Makefile index b9b43a34c3..9b32258696 100644 --- a/doc/media/Makefile +++ b/doc/media/Makefile @@ -22,10 +22,11 @@ $(BUILDDIR)/linker_lists.h.rst: ${API}/linker_lists.h ${PARSER} $(SRC_DIR)/linke # Media build rules -.PHONY: all html epub xml latex +.PHONY: all html texinfo epub xml latex all: $(IMGDOT) $(BUILDDIR) ${TARGETS} html: all +texinfo: all epub: all xml: all latex: $(IMGPDF) all base-commit: 9bd3d354a1a0712ac27c717df9ad60566b0406ee -- 2.38.1

2 1