October 2022 - U-Boot

[PATCH 1/1] efi_loader: efi_dp_part_node check dp_alloc return value
by Heinrich Schuchardt 06 Oct '22

06 Oct '22

dp_alloc() may return NULL. This needs to be caught. Fixes: 98d48bdf415e ("efi_loader: provide a function to create a partition node") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- lib/efi_loader/efi_device_path.c | 3 ++- lib/efi_loader/efi_disk.c | 5 +++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c index ebffb77122..acae007f26 100644 --- a/lib/efi_loader/efi_device_path.c +++ b/lib/efi_loader/efi_device_path.c @@ -936,7 +936,8 @@ struct efi_device_path *efi_dp_part_node(struct blk_desc *desc, int part) dpsize = sizeof(struct efi_device_path_hard_drive_path); buf = dp_alloc(dpsize); - dp_part_node(buf, desc, part); + if (buf) + dp_part_node(buf, desc, part); return buf; } diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c index 39ea1a68a6..79b28097b6 100644 --- a/lib/efi_loader/efi_disk.c +++ b/lib/efi_loader/efi_disk.c @@ -415,6 +415,11 @@ static efi_status_t efi_disk_add_dev( struct efi_handler *handler; void *protocol_interface; + if (!node) { + ret = EFI_OUT_OF_RESOURCES; + goto error; + } + /* Parent must expose EFI_BLOCK_IO_PROTOCOL */ ret = efi_search_protocol(parent, &efi_block_io_guid, &handler); if (ret != EFI_SUCCESS) -- 2.37.2

2 4

[PATCH v2 1/1] cmd: simplify do_env_set_efi()
by Heinrich Schuchardt 06 Oct '22

06 Oct '22

Use efi_convert_string() to convert a UTF-8 to a UTF-16 string. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- v2: remove local variable p don' assign unused NULL to var_name16 --- cmd/nvedit_efi.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/cmd/nvedit_efi.c b/cmd/nvedit_efi.c index 770877c527..2a5335680c 100644 --- a/cmd/nvedit_efi.c +++ b/cmd/nvedit_efi.c @@ -382,8 +382,7 @@ int do_env_set_efi(struct cmd_tbl *cmdtp, int flag, int argc, efi_guid_t guid; u32 attributes; bool default_guid, verbose, value_on_memory; - u16 *var_name16 = NULL, *p; - size_t len; + u16 *var_name16; efi_status_t ret; if (argc == 1) @@ -487,16 +486,12 @@ int do_env_set_efi(struct cmd_tbl *cmdtp, int flag, int argc, 16, 1, value, size, true); } - len = utf8_utf16_strnlen(var_name, strlen(var_name)); - var_name16 = malloc((len + 1) * 2); + var_name16 = efi_convert_string(var_name); if (!var_name16) { printf("## Out of memory\n"); ret = CMD_RET_FAILURE; goto out; } - p = var_name16; - utf8_utf16_strncpy(&p, var_name, len + 1); - ret = efi_set_variable_int(var_name16, &guid, attributes, size, value, true); unmap_sysmem(value); -- 2.37.2

2 1

[PATCH 1/1] efi_driver: provide driver binding protocol to bind function
by Heinrich Schuchardt 06 Oct '22

06 Oct '22

DisconnectController() is based on the open protocol information created when the driver opens a protocol with BY_CHILD_CONTROLLER or BY_DRIVER. To create an open protocol information it is required to supply the handle of the driver as agent handle. This information is available as field DriverBindingHandle in the driver binding protocol. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- include/efi_driver.h | 29 +++++++++++++++-------------- lib/efi_driver/efi_block_device.c | 5 ++++- lib/efi_driver/efi_uclass.c | 2 +- 3 files changed, 20 insertions(+), 16 deletions(-) diff --git a/include/efi_driver.h b/include/efi_driver.h index de38abe83b..71e0d3194e 100644 --- a/include/efi_driver.h +++ b/include/efi_driver.h @@ -10,6 +10,19 @@ #include <efi_loader.h> +/** + * struct efi_driver_binding_extended_protocol - extended driver binding protocol + * + * This structure adds internal fields to the driver binding protocol. + * + * @bp: driver binding protocol + * @ops: operations supported by the driver + */ +struct efi_driver_binding_extended_protocol { + struct efi_driver_binding_protocol bp; + const struct efi_driver_ops *ops; +}; + /** * struct efi_driver_ops - operations support by an EFI driver * @@ -25,20 +38,8 @@ struct efi_driver_ops { const efi_guid_t *protocol; const efi_guid_t *child_protocol; - efi_status_t (*bind)(efi_handle_t handle, void *interface); -}; - -/** - * struct efi_driver_binding_extended_protocol - extended driver binding protocol - * - * This structure adds internal fields to the driver binding protocol. - * - * @bp: driver binding protocol - * @ops: operations supported by the driver - */ -struct efi_driver_binding_extended_protocol { - struct efi_driver_binding_protocol bp; - const struct efi_driver_ops *ops; + efi_status_t (*bind)(struct efi_driver_binding_extended_protocol *this, + efi_handle_t handle, void *interface); }; #endif /* _EFI_DRIVER_H */ diff --git a/lib/efi_driver/efi_block_device.c b/lib/efi_driver/efi_block_device.c index e9eabbde58..f440067f70 100644 --- a/lib/efi_driver/efi_block_device.c +++ b/lib/efi_driver/efi_block_device.c @@ -174,11 +174,14 @@ err: /** * efi_bl_bind() - bind to a block io protocol * + * @this: driver binding protocol * @handle: handle * @interface: block io protocol * Return: status code */ -static efi_status_t efi_bl_bind(efi_handle_t handle, void *interface) +static efi_status_t efi_bl_bind( + struct efi_driver_binding_extended_protocol *this, + efi_handle_t handle, void *interface) { efi_status_t ret = EFI_SUCCESS; struct efi_object *obj = efi_search_obj(handle); diff --git a/lib/efi_driver/efi_uclass.c b/lib/efi_driver/efi_uclass.c index aabee0e260..0a16c594e3 100644 --- a/lib/efi_driver/efi_uclass.c +++ b/lib/efi_driver/efi_uclass.c @@ -146,7 +146,7 @@ static efi_status_t EFIAPI efi_uc_start( ret = check_node_type(controller_handle); if (ret != EFI_SUCCESS) goto err; - ret = bp->ops->bind(controller_handle, interface); + ret = bp->ops->bind(bp, controller_handle, interface); if (ret == EFI_SUCCESS) goto out; -- 2.37.2

2 2

[PATCH 1/2] arm: mvebu: Remove timer.c
by Stefan Roese 06 Oct '22

06 Oct '22

Since the move to CONFIG_TIMER with support for CONFIG_TIMER_EARLY, this platform specific init_timer() function is not needed any more. Let's remove it completely. Signed-off-by: Stefan Roese <sr(a)denx.de> Cc: Michael Walle <michael(a)walle.cc> Cc: Pali Rohár <pali(a)kernel.org> --- arch/arm/mach-mvebu/Makefile | 5 ----- arch/arm/mach-mvebu/spl.c | 2 -- arch/arm/mach-mvebu/timer.c | 41 ------------------------------------ 3 files changed, 48 deletions(-) delete mode 100644 arch/arm/mach-mvebu/timer.c diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 103e64cf2047..406a9ee8f686 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -16,10 +16,6 @@ obj-y = dram.o obj-y += gpio.o obj-y += mbus.o -ifndef CONFIG_TIMER -obj-y += timer.o -endif - else # CONFIG_ARCH_KIRKWOOD obj-y = cpu.o @@ -97,7 +93,6 @@ $(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ endif # CONFIG_SPL_BUILD obj-y += gpio.o obj-y += mbus.o -obj-y += timer.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index ca2d5a59d773..424599286e5e 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -340,8 +340,6 @@ void board_init_f(ulong dummy) preloader_console_init(); - timer_init(); - /* Armada 375 does not support SerDes and DDR3 init yet */ #if !defined(CONFIG_ARMADA_375) /* First init the serdes PHY's */ diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c deleted file mode 100644 index 557a378776d7..000000000000 --- a/arch/arm/mach-mvebu/timer.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) Marvell International Ltd. and its affiliates - * Written-by: Prafulla Wadaskar <prafulla(a)marvell.com> - * - * Copyright (C) 2015 Stefan Roese <sr(a)denx.de> - */ - -#include <common.h> -#include <init.h> -#include <asm/io.h> -#include <asm/arch/soc.h> -#include <linux/bitops.h> - -#define TIMER_LOAD_VAL 0xffffffff - -static int init_done __section(".data") = 0; - -/* - * Timer initialization - */ -int timer_init(void) -{ - /* Only init the timer once */ - if (init_done) - return 0; - init_done = 1; - - /* load value into timer */ - writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x10); - writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x14); - -#if defined(CONFIG_ARCH_MVEBU) - /* On Armada XP / 38x ..., the 25MHz clock source needs to be enabled */ - setbits_le32(MVEBU_TIMER_BASE + 0x00, BIT(11)); -#endif - /* enable timer in auto reload mode */ - setbits_le32(MVEBU_TIMER_BASE + 0x00, 0x3); - - return 0; -} -- 2.37.3

1 3

[PATCH] tools: kwbimage: Verify maximal kwbimage header size
by Pali Rohár 06 Oct '22

06 Oct '22

BootROM loads kwbimage header to L2-SRAM and BootROM reserve only 192 kB for it. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- tools/kwbimage.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 94b768539222..6abb9f2d5c01 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -1969,6 +1969,9 @@ static int kwbimage_verify_header(unsigned char *ptr, int image_size, uint32_t size; uint8_t csum; + if (header_size > 192*1024) + return -FDT_ERR_BADSTRUCTURE; + if (header_size > image_size) return -FDT_ERR_BADSTRUCTURE; -- 2.20.1

2 2

[PATCH] mtd: nand: pxa3xx: simplify ECC hardware parameters
by Chris Packham 06 Oct '22

06 Oct '22

Replace the if/else chain in pxa_ecc_init() with a lookup table. This makes the code more concise and hopefully easier to follow. Remove the unused ecc_layout tables and replace it with a single dummy one (the pxa3xx driver has never used this but the mtd subsystem expects it to be provided). Tested on an Allied Telesis x530 switch with Micron MT29F2G08ABAEAWP NAND Flash. Signed-off-by: Chris Packham <judge.packham(a)gmail.com> --- This code was taken from the Marvell SDK for the AC5/AC5X integrated switch/CPU. There are other changes to support the SoC which I will likely attempt to upstream soon but I think this stands on it's own merit as a nice clean up. Reports of testing on other combinations of hardware would be greatly appreciated. drivers/mtd/nand/raw/pxa3xx_nand.c | 247 ++++++++--------------------- 1 file changed, 68 insertions(+), 179 deletions(-) diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c index 9c29e8a6c214..fcd1b9c63614 100644 --- a/drivers/mtd/nand/raw/pxa3xx_nand.c +++ b/drivers/mtd/nand/raw/pxa3xx_nand.c @@ -330,89 +330,44 @@ static struct nand_bbt_descr bbt_mirror_descr = { }; #endif -static struct nand_ecclayout ecc_layout_2KB_bch4bit = { - .eccbytes = 32, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, - .oobfree = { {2, 30} } +struct marvell_hw_ecc_layout { + int page_size; + int strength; + unsigned int ecc_size; + unsigned int nfullchunks; + unsigned int chunk_size; + unsigned int spare_size; + unsigned int last_chunk_size; + unsigned int last_spare_size; }; -static struct nand_ecclayout ecc_layout_2KB_bch8bit = { - .eccbytes = 64, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90, 91, 92, 93, 94, 95}, - .oobfree = { {1, 4}, {6, 26} } +static const struct marvell_hw_ecc_layout nfc_layouts[] = { + /* page_size strength ecc_size nfullchunks chunk_size spare_size last_chunk last_spare */ + { 512, 1, 8, 1, 512, 8, 0, 0 }, + { 2048, 1, 24, 1, 2048, 40, 0, 0 }, + + { 2048, 4, 32, 1, 2048, 32, 0, 0 }, + { 2048, 8, 32, 1, 1024, 0, 1024, 32 }, + { 2048, 12, 32, 2, 704, 0, 640, 0 }, + { 2048, 16, 32, 4, 512, 0, 0, 32 }, + { 4096, 4, 32, 2, 2048, 32, 0, 0 }, + { 4096, 8, 32, 4, 1024, 0, 0, 64 }, + { 4096, 12, 32, 5, 704, 0, 576, 32 }, + { 4096, 16, 32, 8, 512, 0, 0, 32 }, + + { 8192, 4, 32, 4, 2048, 32, 0, 0 }, + { 8192, 8, 32, 8, 1024, 0, 0, 160 }, + { 8192, 12, 32, 11, 704, 0, 448, 64 }, + { 8192, 16, 32, 16, 512, 0, 0, 32 }, + { }, }; -static struct nand_ecclayout ecc_layout_4KB_bch4bit = { - .eccbytes = 64, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127}, - /* Bootrom looks in bytes 0 & 5 for bad blocks */ - .oobfree = { {6, 26}, { 64, 32} } -}; - -static struct nand_ecclayout ecc_layout_8KB_bch4bit = { - .eccbytes = 128, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - - 96, 97, 98, 99, 100, 101, 102, 103, - 104, 105, 106, 107, 108, 109, 110, 111, - 112, 113, 114, 115, 116, 117, 118, 119, - 120, 121, 122, 123, 124, 125, 126, 127, - - 160, 161, 162, 163, 164, 165, 166, 167, - 168, 169, 170, 171, 172, 173, 174, 175, - 176, 177, 178, 179, 180, 181, 182, 183, - 184, 185, 186, 187, 188, 189, 190, 191, - - 224, 225, 226, 227, 228, 229, 230, 231, - 232, 233, 234, 235, 236, 237, 238, 239, - 240, 241, 242, 243, 244, 245, 246, 247, - 248, 249, 250, 251, 252, 253, 254, 255}, - - /* Bootrom looks in bytes 0 & 5 for bad blocks */ - .oobfree = { {1, 4}, {6, 26}, { 64, 32}, {128, 32}, {192, 32} } -}; - -static struct nand_ecclayout ecc_layout_4KB_bch8bit = { - .eccbytes = 128, - .eccpos = { - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, +static struct nand_ecclayout ecc_layout_empty = { + .eccbytes = 0, + .eccpos = { }, .oobfree = { } }; -static struct nand_ecclayout ecc_layout_8KB_bch8bit = { - .eccbytes = 256, - .eccpos = {}, - /* HW ECC handles all ECC data and all spare area is free for OOB */ - .oobfree = {{0, 160} } -}; - #define NDTR0_tCH(c) (min((c), 7) << 19) #define NDTR0_tCS(c) (min((c), 7) << 16) #define NDTR0_tWH(c) (min((c), 7) << 11) @@ -1549,113 +1504,47 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info, struct nand_ecc_ctrl *ecc, int strength, int ecc_stepsize, int page_size) { - if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { - info->nfullchunks = 1; - info->ntotalchunks = 1; - info->chunk_size = 2048; - info->spare_size = 40; - info->ecc_size = 24; - ecc->mode = NAND_ECC_HW; - ecc->size = 512; - ecc->strength = 1; + int i = 0; - } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { - info->nfullchunks = 1; - info->ntotalchunks = 1; - info->chunk_size = 512; - info->spare_size = 8; - info->ecc_size = 8; - ecc->mode = NAND_ECC_HW; - ecc->size = 512; - ecc->strength = 1; + /* if ecc strength is 1 ecc algo is Hamming else bch */ + info->ecc_bch = (strength == 1) ? 0 : 1; - /* - * Required ECC: 4-bit correction per 512 bytes - * Select: 16-bit correction per 2048 bytes + ecc->mode = NAND_ECC_HW; + + /* ecc->layout is not in use for pxa driver (but shouldn't be NULL)*/ + if (info->ecc_bch == 1) + ecc->layout = &ecc_layout_empty; + + /* for bch actual ecc strength is 16 per chunk */ + ecc->strength = (info->ecc_bch == 1) ? 16 : 1; + + while (nfc_layouts[i].strength) { + if (strength == nfc_layouts[i].strength && page_size == nfc_layouts[i].page_size) { + info->nfullchunks = nfc_layouts[i].nfullchunks; + info->chunk_size = nfc_layouts[i].chunk_size; + info->spare_size = nfc_layouts[i].spare_size; + info->last_chunk_size = nfc_layouts[i].last_chunk_size; + info->last_spare_size = nfc_layouts[i].last_spare_size; + info->ntotalchunks = (info->last_spare_size || info->last_chunk_size) ? + info->nfullchunks + 1 : info->nfullchunks; + info->ecc_size = nfc_layouts[i].ecc_size; + break; + } + ++i; + } + + /* for bch the ecc is calculated per chunk size and for Hamming it is 512 */ + ecc->size = (info->ecc_bch) ? info->chunk_size : 512; + + /* nand_scan_tail func perform validity tests for ECC strength, and it + * assumes that all chunks are with same size. in our case when ecc is 12 + * the chunk size is 704 but the last chunk is with different size so + * we cheat it nand_scan_tail validity tests by set info->ecc_size value to 512 */ - } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) { - info->ecc_bch = 1; - info->nfullchunks = 1; - info->ntotalchunks = 1; - info->chunk_size = 2048; - info->spare_size = 32; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_2KB_bch4bit; - ecc->strength = 16; + if (strength == 12) + ecc->size = 512; - } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; - info->nfullchunks = 2; - info->ntotalchunks = 2; - info->chunk_size = 2048; - info->spare_size = 32; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_4KB_bch4bit; - ecc->strength = 16; - - } else if (strength == 4 && ecc_stepsize == 512 && page_size == 8192) { - info->ecc_bch = 1; - info->nfullchunks = 4; - info->ntotalchunks = 4; - info->chunk_size = 2048; - info->spare_size = 32; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_8KB_bch4bit; - ecc->strength = 16; - - /* - * Required ECC: 8-bit correction per 512 bytes - * Select: 16-bit correction per 1024 bytes - */ - } else if (strength == 8 && ecc_stepsize == 512 && page_size == 2048) { - info->ecc_bch = 1; - info->nfullchunks = 1; - info->ntotalchunks = 2; - info->chunk_size = 1024; - info->spare_size = 0; - info->last_chunk_size = 1024; - info->last_spare_size = 32; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_2KB_bch8bit; - ecc->strength = 16; - - } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; - info->nfullchunks = 4; - info->ntotalchunks = 5; - info->chunk_size = 1024; - info->spare_size = 0; - info->last_chunk_size = 0; - info->last_spare_size = 64; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_4KB_bch8bit; - ecc->strength = 16; - - } else if (strength == 8 && ecc_stepsize == 512 && page_size == 8192) { - info->ecc_bch = 1; - info->nfullchunks = 8; - info->ntotalchunks = 9; - info->chunk_size = 1024; - info->spare_size = 0; - info->last_chunk_size = 0; - info->last_spare_size = 160; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; - ecc->layout = &ecc_layout_8KB_bch8bit; - ecc->strength = 16; - - } else { + if (ecc_stepsize != 512 || !(nfc_layouts[i].strength)) { dev_err(info->controller.active->mtd.dev, "ECC strength %d at page size %d is not supported\n", strength, page_size); -- 2.37.2

3 2

[RFC PATCH 0/2] Clean up protocol installation API
by Ilias Apalodimas 06 Oct '22

06 Oct '22

This RFC is trying to clean up the usage of the internal functions used to manage the protocol and handle lifetimes. Currently we arbitrarily use either InstallProtocol, InstallMultipleProtocol and a combination of efi_add_protocol, efi_create_handle, efi_delete_handle(). The latter is the most problematic one since it blindly removes all protocols from a handle and finally the handle itself. This is prone to coding errors Since someone might inadvertently delete a handle while other consumers still use a protocol. InstallProtocol is also ambiguous since the EFI spec only demands InstallMultipleProtocol to test and guarantee a duplicate device path is not inadvertently installed on two different handles. So this patch series is preparing the ground in order for InstallMultipleProtocol and UnInstallMultipleProtocol to be used internally in U-Boot. There is an example on bootefi.c demonstrating how the cleanup would eventually look like. If we agree on the direction, I'll clean up the remaining callsites with InstallMultipleProtocol. Size differences between old/new binary show that eventually we will manage to reduce the overall code size by getting rid all the unneeded EFI_CALL invocations add/remove: 4/0 grow/shrink: 1/6 up/down: 1128/-892 (236) Function old new delta __efi_install_multiple_protocol_interfaces - 496 +496 __efi_uninstall_multiple_protocol_interfaces - 412 +412 efi_uninstall_multiple_protocol_interfaces_ext - 108 +108 efi_install_multiple_protocol_interfaces_ext - 108 +108 efi_run_image 288 292 +4 efi_initrd_register 220 212 -8 efi_console_register 344 336 -8 efi_disk_add_dev.part 644 632 -12 efi_root_node_register 256 240 -16 efi_uninstall_multiple_protocol_interfaces 472 84 -388 efi_install_multiple_protocol_interfaces 544 84 -460 Total: Before=547442, After=547678, chg +0.04% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) Data old new delta Total: Before=101061, After=101061, chg +0.00% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) RO Data old new delta Total: Before=42925, After=42925, chg +0.00% Ilias Apalodimas (2): efi_loader: define internal implementation of install/uninstallmultiple cmd: replace efi_create_handle/add_protocol with InstallMultipleProtocol cmd/bootefi.c | 13 ++- include/efi.h | 2 + include/efi_loader.h | 6 +- lib/efi_loader/efi_boottime.c | 180 ++++++++++++++++++++++++------- lib/efi_loader/efi_capsule.c | 15 +-- lib/efi_loader/efi_console.c | 14 +-- lib/efi_loader/efi_disk.c | 10 +- lib/efi_loader/efi_load_initrd.c | 15 ++- lib/efi_loader/efi_root_node.c | 44 ++++---- 9 files changed, 203 insertions(+), 96 deletions(-) -- 2.34.1

3 13

[PATCH] board/km: remove kirkwood boards
by Holger Brunck 06 Oct '22

06 Oct '22

These boards are out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck(a)hitachienergy.com> --- arch/arm/dts/Makefile | 1 - arch/arm/dts/kirkwood-km_common.dtsi | 48 --- arch/arm/dts/kirkwood-km_kirkwood.dts | 53 --- board/keymile/Kconfig | 1 - board/keymile/km_arm/Kconfig | 86 ----- board/keymile/km_arm/MAINTAINERS | 11 - board/keymile/km_arm/Makefile | 11 - board/keymile/km_arm/fpga_config.c | 255 -------------- board/keymile/km_arm/km_arm.c | 520 ----------------------------- board/keymile/km_arm/kwbimage-memphis.cfg | 179 ---------- board/keymile/km_arm/kwbimage.cfg | 161 --------- board/keymile/km_arm/kwbimage_128M16_1.cfg | 257 -------------- board/keymile/km_arm/kwbimage_256M8_1.cfg | 257 -------------- board/keymile/scripts/develop-common.txt | 2 +- configs/km_kirkwood_128m16_defconfig | 81 ----- configs/km_kirkwood_defconfig | 81 ----- configs/km_kirkwood_pci_defconfig | 81 ----- configs/kmcoge5un_defconfig | 84 ----- configs/kmnusa_defconfig | 85 ----- configs/kmsuse2_defconfig | 85 ----- include/configs/km/km_arm.h | 158 --------- include/configs/km_kirkwood.h | 118 ------- scripts/config_whitelist.txt | 1 - 23 files changed, 1 insertion(+), 2615 deletions(-) delete mode 100644 arch/arm/dts/kirkwood-km_common.dtsi delete mode 100644 arch/arm/dts/kirkwood-km_kirkwood.dts delete mode 100644 board/keymile/km_arm/Kconfig delete mode 100644 board/keymile/km_arm/MAINTAINERS delete mode 100644 board/keymile/km_arm/Makefile delete mode 100644 board/keymile/km_arm/fpga_config.c delete mode 100644 board/keymile/km_arm/km_arm.c delete mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg delete mode 100644 board/keymile/km_arm/kwbimage.cfg delete mode 100644 board/keymile/km_arm/kwbimage_128M16_1.cfg delete mode 100644 board/keymile/km_arm/kwbimage_256M8_1.cfg delete mode 100644 configs/km_kirkwood_128m16_defconfig delete mode 100644 configs/km_kirkwood_defconfig delete mode 100644 configs/km_kirkwood_pci_defconfig delete mode 100644 configs/kmcoge5un_defconfig delete mode 100644 configs/kmnusa_defconfig delete mode 100644 configs/kmsuse2_defconfig delete mode 100644 include/configs/km/km_arm.h delete mode 100644 include/configs/km_kirkwood.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7330121..3f5bfca 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -58,7 +58,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-is2.dtb \ - kirkwood-km_kirkwood.dtb \ kirkwood-lsxhl.dtb \ kirkwood-lschlv2.dtb \ kirkwood-net2big.dtb \ diff --git a/arch/arm/dts/kirkwood-km_common.dtsi b/arch/arm/dts/kirkwood-km_common.dtsi deleted file mode 100644 index 9d0fc51..0000000 --- a/arch/arm/dts/kirkwood-km_common.dtsi +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; - pinctrl-names = "default"; - - pmx_i2c_gpio_sda: pmx-gpio-sda { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_i2c_gpio_scl: pmx-gpio-scl { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - clock-frequency = <200000000>; - }; - }; - - i2c { - compatible = "i2c-gpio"; - gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ - &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - }; -}; - -&nand { - status = "okay"; - chip-delay = <25>; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-km_kirkwood.dts b/arch/arm/dts/kirkwood-km_kirkwood.dts deleted file mode 100644 index b2c0209..0000000 --- a/arch/arm/dts/kirkwood-km_kirkwood.dts +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-98dx4122.dtsi" -#include "kirkwood-km_common.dtsi" - -/ { - model = "Keymile Kirkwood Reference Design"; - compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - aliases { - spi0 = &spi0; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -&eth0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <&ethphy0>; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80", "jedec,spi-nor", "spi-flash"; - reg = <0>; - spi-max-frequency = <33000000>; - mode = <3>; - - partition@uboot { - reg = <0x000000 0x0c0000>; - label = "uboot"; - }; - }; -}; diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index f22faee..9f78443 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -167,7 +167,6 @@ config PG_WCOM_UBOOT_UPDATE source "board/keymile/km83xx/Kconfig" source "board/keymile/kmcent2/Kconfig" -source "board/keymile/km_arm/Kconfig" source "board/keymile/pg-wcom-ls102xa/Kconfig" endmenu diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig deleted file mode 100644 index 9d222d7..0000000 --- a/board/keymile/km_arm/Kconfig +++ /dev/null @@ -1,86 +0,0 @@ -menu "KM ARM Options" - depends on ARM - -config KM_FPGA_CONFIG - bool "FPGA Configuration" - help - Include capability to change FPGA configuration. - -config KM_FPGA_FORCE_CONFIG - bool "FPGA reconfiguration" - help - If yes we force to reconfigure the FPGA always - -config KM_FPGA_NO_RESET - bool "FPGA skip reset" - help - If yes we skip triggering a reset of the FPGA - -config KM_ENV_IS_IN_SPI_NOR - bool "Environment in SPI NOR" - help - Put the U-Boot environment in the SPI NOR flash. - -config KM_PIGGY4_88E6061 - bool "Piggy via Switch 88E6061" - help - The Piggy4 board is connected via a Marvell 88E6061 switch. - -config KM_PIGGY4_88E6352 - bool "Piggy via Switch 88E6352" - help - The Piggy4 board is connected via a Marvell 88E6352 switch. - -endmenu - -if TARGET_KM_KIRKWOOD - -config SYS_BOARD - default "km_arm" - -config SYS_VENDOR - default "keymile" - -config SYS_CONFIG_NAME - default "km_kirkwood" - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select BOARD_LATE_INIT - select DM - select DM_ETH - select DM_SERIAL - select DM_SPI - select DM_SPI_FLASH - select USB - select USB_EHCI_HCD - select USB_EHCI_MARVELL - imply CMD_CRAMFS - imply CMD_DIAG - imply FS_CRAMFS - imply CMD_USB - -choice - prompt "Board model" - -config KM_COGE5UN - bool "Hitachi Power Grids COGE5UN" - -config KM_KIRKWOOD_128M16 - bool "Hitachi Power Grids Kirkwood 128M16" - -config KM_KIRKWOOD - bool "Hitachi Power Grids Kirkwood" - -config KM_KIRKWOOD_PCI - bool "Hitachi Power Grids Kirkwood PCI" - -config KM_NUSA - bool "Hitachi Power Grids Kirkwood (NUSA)" - -config KM_SUSE2 - bool "Hitachi Power Grids Kirkwood (SUSE2)" - -endchoice - -endif diff --git a/board/keymile/km_arm/MAINTAINERS b/board/keymile/km_arm/MAINTAINERS deleted file mode 100644 index bc6858b..0000000 --- a/board/keymile/km_arm/MAINTAINERS +++ /dev/null @@ -1,11 +0,0 @@ -KM_ARM BOARD -M: Holger Brunck <holger.brunck(a)hitachienergy.com> -S: Maintained -F: board/keymile/km_arm/ -F: include/configs/km_kirkwood.h -F: configs/km_kirkwood_defconfig -F: configs/km_kirkwood_128m16_defconfig -F: configs/km_kirkwood_pci_defconfig -F: configs/kmcoge5un_defconfig -F: configs/kmnusa_defconfig -F: configs/kmsuse2_defconfig diff --git a/board/keymile/km_arm/Makefile b/board/keymile/km_arm/Makefile deleted file mode 100644 index 79ccc76..0000000 --- a/board/keymile/km_arm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Prafulla Wadaskar <prafulla(a)marvell.com> - -obj-y := km_arm.o ../common/common.o ../common/ivm.o - -ifdef CONFIG_KM_FPGA_CONFIG -obj-y += fpga_config.o -endif diff --git a/board/keymile/km_arm/fpga_config.c b/board/keymile/km_arm/fpga_config.c deleted file mode 100644 index 839b162..0000000 --- a/board/keymile/km_arm/fpga_config.c +++ /dev/null @@ -1,255 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2012 - * Valentin Lontgchamp, Keymile AG, valentin.longchamp(a)keymile.com - */ - -#include <common.h> -#include <i2c.h> -#include <linux/delay.h> -#include <linux/errno.h> - -/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */ -#define KM_XLX_PROGRAM_B_PIN 39 - -#define BOCO_ADDR 0x10 - -#define ID_REG 0x00 -#define BOCO2_ID 0x5b - -static int check_boco2(void) -{ - int ret; - u8 id; - - ret = i2c_read(BOCO_ADDR, ID_REG, 1, &id, 1); - if (ret) { - printf("%s: error reading the BOCO id !!\n", __func__); - return ret; - } - - return (id == BOCO2_ID); -} - -static int boco_clear_bits(u8 reg, u8 flags) -{ - int ret; - u8 regval; - - /* give access to the EEPROM from FPGA */ - ret = i2c_read(BOCO_ADDR, reg, 1, &regval, 1); - if (ret) { - printf("%s: error reading the BOCO @%#x !!\n", - __func__, reg); - return ret; - } - regval &= ~flags; - ret = i2c_write(BOCO_ADDR, reg, 1, &regval, 1); - if (ret) { - printf("%s: error writing the BOCO @%#x !!\n", - __func__, reg); - return ret; - } - - return 0; -} - -static int boco_set_bits(u8 reg, u8 flags) -{ - int ret; - u8 regval; - - /* give access to the EEPROM from FPGA */ - ret = i2c_read(BOCO_ADDR, reg, 1, &regval, 1); - if (ret) { - printf("%s: error reading the BOCO @%#x !!\n", - __func__, reg); - return ret; - } - regval |= flags; - ret = i2c_write(BOCO_ADDR, reg, 1, &regval, 1); - if (ret) { - printf("%s: error writing the BOCO @%#x !!\n", - __func__, reg); - return ret; - } - - return 0; -} - -#define SPI_REG 0x06 -#define CFG_EEPROM 0x02 -#define FPGA_PROG 0x04 -#define FPGA_INIT_B 0x10 -#define FPGA_DONE 0x20 - -#ifndef CONFIG_KM_FPGA_FORCE_CONFIG -static int fpga_done(void) -{ - int ret = 0; - u8 regval; - - /* this is only supported with the boco2 design */ - if (!check_boco2()) - return 0; - - ret = i2c_read(BOCO_ADDR, SPI_REG, 1, &regval, 1); - if (ret) { - printf("%s: error reading the BOCO @%#x !!\n", - __func__, SPI_REG); - return 0; - } - - return regval & FPGA_DONE ? 1 : 0; -} -#endif /* CONFIG_KM_FPGA_FORCE_CONFIG */ - -static int skip; - -int trigger_fpga_config(void) -{ - int ret = 0; - - skip = 0; -#ifndef CONFIG_KM_FPGA_FORCE_CONFIG - /* if the FPGA is already configured, we do not want to - * reconfigure it - */ - skip = 0; - if (fpga_done()) { - printf("PCIe FPGA config: skipped\n"); - skip = 1; - return 0; - } -#endif /* CONFIG_KM_FPGA_FORCE_CONFIG */ - - if (check_boco2()) { - /* we have a BOCO2, this has to be triggered here */ - - /* make sure the FPGA_can access the EEPROM */ - ret = boco_clear_bits(SPI_REG, CFG_EEPROM); - if (ret) - return ret; - - /* trigger the config start */ - ret = boco_clear_bits(SPI_REG, FPGA_PROG | FPGA_INIT_B); - if (ret) - return ret; - - /* small delay for the pulse */ - udelay(10); - - /* up signal for pulse end */ - ret = boco_set_bits(SPI_REG, FPGA_PROG); - if (ret) - return ret; - - /* finally, raise INIT_B to remove the config delay */ - ret = boco_set_bits(SPI_REG, FPGA_INIT_B); - if (ret) - return ret; - - } else { - /* we do it the old way, with the gpio pin */ - kw_gpio_set_valid(KM_XLX_PROGRAM_B_PIN, 1); - kw_gpio_direction_output(KM_XLX_PROGRAM_B_PIN, 0); - /* small delay for the pulse */ - udelay(10); - kw_gpio_direction_input(KM_XLX_PROGRAM_B_PIN); - } - - return 0; -} - -int wait_for_fpga_config(void) -{ - int ret = 0; - u8 spictrl; - u32 timeout = 20000; - - if (skip) - return 0; - - if (!check_boco2()) { - /* we do not have BOCO2, this is not really used */ - return 0; - } - - printf("PCIe FPGA config:"); - do { - ret = i2c_read(BOCO_ADDR, SPI_REG, 1, &spictrl, 1); - if (ret) { - printf("%s: error reading the BOCO spictrl !!\n", - __func__); - return ret; - } - if (timeout-- == 0) { - printf(" FPGA_DONE timeout\n"); - return -EFAULT; - } - udelay(10); - } while (!(spictrl & FPGA_DONE)); - - printf(" done\n"); - - return 0; -} - -#if defined(CONFIG_KM_FPGA_NO_RESET) -int fpga_reset(void) -{ - /* no dedicated reset pin for FPGA */ - return 0; -} -#else - -#define PRST1 0x4 -#define PCIE_RST 0x10 -#define TRAFFIC_RST 0x04 - -int fpga_reset(void) -{ - int ret = 0; - u8 resets; - - if (!check_boco2()) { - /* we do not have BOCO2, this is not really used */ - return 0; - } - - /* if we have skipped, we only want to reset the PCIe part */ - resets = skip ? PCIE_RST : PCIE_RST | TRAFFIC_RST; - - ret = boco_clear_bits(PRST1, resets); - if (ret) - return ret; - - /* small delay for the pulse */ - udelay(10); - - ret = boco_set_bits(PRST1, resets); - if (ret) - return ret; - - return 0; -} -#endif - -/* the FPGA was configured, we configure the BOCO2 so that the EEPROM - * is available from the Bobcat SPI bus - */ -int toggle_eeprom_spi_bus(void) -{ - int ret = 0; - - if (!check_boco2()) { - /* we do not have BOCO2, this is not really used */ - return 0; - } - - ret = boco_set_bits(SPI_REG, CFG_EEPROM); - if (ret) - return ret; - - return 0; -} diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c deleted file mode 100644 index e9af090..0000000 --- a/board/keymile/km_arm/km_arm.c +++ /dev/null @@ -1,520 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Prafulla Wadaskar <prafulla(a)marvell.com> - * - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs(a)denx.de. - */ - -#include <common.h> -#include <env.h> -#include <i2c.h> -#include <init.h> -#include <nand.h> -#include <net.h> -#include <netdev.h> -#include <miiphy.h> -#include <spi.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> - -#include "../common/common.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * BOCO FPGA definitions - */ -#define BOCO 0x10 -#define REG_CTRL_H 0x02 -#define MASK_WRL_UNITRUN 0x01 -#define MASK_RBX_PGY_PRESENT 0x40 -#define REG_IRQ_CIRQ2 0x2d -#define MASK_RBI_DEFECT_16 0x01 - -/* - * PHY registers definitions - */ -#define PHY_MARVELL_OUI 0x5043 -#define PHY_MARVELL_88E1118_MODEL 0x0022 -#define PHY_MARVELL_88E1118R_MODEL 0x0024 - -#define PHY_MARVELL_PAGE_REG 0x0016 -#define PHY_MARVELL_DEFAULT_PAGE 0x0000 - -#define PHY_MARVELL_88E1118R_LED_CTRL_PAGE 0x0003 -#define PHY_MARVELL_88E1118R_LED_CTRL_REG 0x0010 - -#define PHY_MARVELL_88E1118R_LED_CTRL_RESERVED 0x1000 -#define PHY_MARVELL_88E1118R_LED_CTRL_LED0_1000MB (0x7 << 0) -#define PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT (0x3 << 4) -#define PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK (0x0 << 8) - -/* I/O pin to erase flash RGPP09 = MPP43 */ -#define KM_FLASH_ERASE_ENABLE 43 - -/* Multi-Purpose Pins Functionality configuration */ -static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_PEX_RST_OUTn, -#if defined(CONFIG_SYS_I2C_SOFT) - MPP8_GPIO, /* SDA */ - MPP9_GPIO, /* SCL */ -#endif - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Reserved */ - MPP13_UART1_TXD, - MPP14_UART1_RXD, - MPP15_GPIO, /* Not used */ - MPP16_GPIO, /* Not used */ - MPP17_GPIO, /* Reserved */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, /* CDL1 (input) */ - MPP35_GPIO, /* CDL2 (input) */ - MPP36_GPIO, /* MAIN_IRQ (input) */ - MPP37_GPIO, /* BOARD_LED */ - MPP38_GPIO, /* Piggy3 LED[1] */ - MPP39_GPIO, /* Piggy3 LED[2] */ - MPP40_GPIO, /* Piggy3 LED[3] */ - MPP41_GPIO, /* Piggy3 LED[4] */ - MPP42_GPIO, /* Piggy3 LED[5] */ - MPP43_GPIO, /* Piggy3 LED[6] */ - MPP44_GPIO, /* Piggy3 LED[7], BIST_EN_L */ - MPP45_GPIO, /* Piggy3 LED[8] */ - MPP46_GPIO, /* Reserved */ - MPP47_GPIO, /* Reserved */ - MPP48_GPIO, /* Reserved */ - MPP49_GPIO, /* SW_INTOUTn */ - 0 -}; - -static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; - -#if (defined(CONFIG_KM_PIGGY4_88E6061)|defined(CONFIG_KM_PIGGY4_88E6352)) -/* - * All boards with PIGGY4 connected via a simple switch have ethernet always - * present. - */ -int ethernet_present(void) -{ - return 1; -} -#else -int ethernet_present(void) -{ - uchar buf; - int ret = 0; - - if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) { - printf("%s: Error reading Boco\n", __func__); - return -1; - } - if ((buf & MASK_RBX_PGY_PRESENT) == MASK_RBX_PGY_PRESENT) - ret = 1; - - return ret; -} -#endif - -static int initialize_unit_leds(void) -{ - /* - * Init the unit LEDs per default they all are - * ok apart from bootstat - */ - uchar buf; - - if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) { - printf("%s: Error reading Boco\n", __func__); - return -1; - } - buf |= MASK_WRL_UNITRUN; - if (i2c_write(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) { - printf("%s: Error writing Boco\n", __func__); - return -1; - } - return 0; -} - -static void set_bootcount_addr(void) -{ - uchar buf[32]; - unsigned int bootcountaddr; - - bootcountaddr = gd->ram_size - BOOTCOUNT_ADDR; - sprintf((char *)buf, "0x%x", bootcountaddr); - env_set("bootcountaddr", (char *)buf); -} - -int misc_init_r(void) -{ - ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN, - CONFIG_PIGGY_MAC_ADDRESS_OFFSET); - - initialize_unit_leds(); - set_km_env(); - set_bootcount_addr(); - return 0; -} - -int board_early_init_f(void) -{ -#if defined(CONFIG_SYS_I2C_SOFT) - u32 tmp; - - /* set the 2 bitbang i2c pins as output gpios */ - tmp = readl(MVEBU_GPIO0_BASE + 4); - writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS), MVEBU_GPIO0_BASE + 4); -#endif - /* adjust SDRAM size for bank 0 */ - mvebu_sdram_size_adjust(0); - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - /* - * The KM_FLASH_GPIO_PIN switches between using a - * NAND or a SPI FLASH. Set this pin on start - * to NAND mode. - */ - kw_gpio_set_valid(KM_FLASH_GPIO_PIN, 1); - kw_gpio_direction_output(KM_FLASH_GPIO_PIN, 1); - -#if defined(CONFIG_SYS_I2C_SOFT) - /* - * Reinit the GPIO for I2C Bitbang driver so that the now - * available gpio framework is consistent. The calls to - * direction output in are not necessary, they are already done in - * board_early_init_f - */ - kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1); - kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1); -#endif - -#if defined(CONFIG_SYS_EEPROM_WREN) - kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38); - kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1); -#endif - -#if defined(CONFIG_KM_FPGA_CONFIG) - trigger_fpga_config(); -#endif - - return 0; -} - -int board_late_init(void) -{ -#if defined(CONFIG_KM_COGE5UN) - u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE); - - /* if pin 1 do full erase */ - if (dip_switch != 0) { - /* start bootloader */ - puts("DIP: Enabled\n"); - env_set("actual_bank", "0"); - } -#endif - -#if defined(CONFIG_KM_FPGA_CONFIG) - wait_for_fpga_config(); - fpga_reset(); - toggle_eeprom_spi_bus(); -#endif - return 0; -} - -static const u32 spi_mpp_config[] = { - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - 0 -}; - -static u32 spi_mpp_backup[4]; - -int mvebu_board_spi_claim_bus(struct udevice *dev) -{ - spi_mpp_backup[3] = 0; - - /* set new spi mpp config and save current one */ - kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup); - - kw_gpio_set_value(KM_FLASH_GPIO_PIN, 0); - - return 0; -} - -int mvebu_board_spi_release_bus(struct udevice *dev) -{ - /* restore saved mpp config */ - kirkwood_mpp_conf(spi_mpp_backup, NULL); - - kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1); - - return 0; -} - -#if (defined(CONFIG_KM_PIGGY4_88E6061)) - -#define PHY_LED_SEL_REG 0x18 -#define PHY_LED0_LINK (0x5) -#define PHY_LED1_ACT (0x8 << 4) -#define PHY_LED2_INT (0xe << 8) -#define PHY_SPEC_CTRL_REG 0x1c -#define PHY_RGMII_CLK_STABLE (0x1 << 10) -#define PHY_CLSA (0x1 << 1) - -/* Configure and enable MV88E3018 PHY */ -void reset_phy(void) -{ - char *name = "egiga0"; - unsigned short reg; - - if (miiphy_set_current_dev(name)) - return; - - /* RGMII clk transition on data stable */ - if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, &reg)) - printf("Error reading PHY spec ctrl reg\n"); - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, - reg | PHY_RGMII_CLK_STABLE | PHY_CLSA)) - printf("Error writing PHY spec ctrl reg\n"); - - /* leds setup */ - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG, - PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT)) - printf("Error writing PHY LED reg\n"); - - /* reset the phy */ - miiphy_reset(name, CONFIG_PHY_BASE_ADR); -} -#elif defined(CONFIG_KM_PIGGY4_88E6352) - -#include <mv88e6352.h> - -#if defined(CONFIG_KM_NUSA) -struct mv88e_sw_reg extsw_conf[] = { - /* - * port 0, PIGGY4, autoneg - * first the fix for the 1000Mbits Autoneg, this is from - * a Marvell errata, the regs are undocumented - */ - { PHY(0), PHY_PAGE, AN1000FIX_PAGE }, - { PHY(0), PHY_STATUS, AN1000FIX }, - { PHY(0), PHY_PAGE, 0 }, - /* now the real port and phy configuration */ - { PORT(0), PORT_PHY, NO_SPEED_FOR }, - { PORT(0), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - { PHY(0), PHY_1000_CTRL, NO_ADV }, - { PHY(0), PHY_SPEC_CTRL, AUTO_MDIX_EN }, - { PHY(0), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST | - FULL_DUPLEX }, - /* port 1, unused */ - { PORT(1), PORT_CTRL, PORT_DIS }, - { PHY(1), PHY_CTRL, PHY_PWR_DOWN }, - { PHY(1), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, - /* port 2, unused */ - { PORT(2), PORT_CTRL, PORT_DIS }, - { PHY(2), PHY_CTRL, PHY_PWR_DOWN }, - { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, - /* port 3, unused */ - { PORT(3), PORT_CTRL, PORT_DIS }, - { PHY(3), PHY_CTRL, PHY_PWR_DOWN }, - { PHY(3), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, - /* port 4, ICNEV, SerDes, SGMII */ - { PORT(4), PORT_STATUS, NO_PHY_DETECT }, - { PORT(4), PORT_PHY, SPEED_1000_FOR }, - { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - { PHY(4), PHY_CTRL, PHY_PWR_DOWN }, - { PHY(4), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, - /* port 5, CPU_RGMII */ - { PORT(5), PORT_PHY, RX_RGMII_TIM | TX_RGMII_TIM | FLOW_CTRL_EN | - FLOW_CTRL_FOR | LINK_VAL | LINK_FOR | FULL_DPX | - FULL_DPX_FOR | SPEED_1000_FOR }, - { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* port 6, unused, this port has no phy */ - { PORT(6), PORT_CTRL, PORT_DIS }, -}; -#else -struct mv88e_sw_reg extsw_conf[] = {}; -#endif - -void reset_phy(void) -{ -#if defined(CONFIG_KM_MVEXTSW_ADDR) - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf, - ARRAY_SIZE(extsw_conf)); - mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR); -#endif -} - -#else -/* Configure and enable MV88E1118 PHY on the piggy*/ -void reset_phy(void) -{ - unsigned int oui; - unsigned char model, rev; - - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* reset the phy */ - miiphy_reset(name, CONFIG_PHY_BASE_ADR); - - /* get PHY model */ - if (miiphy_info(name, CONFIG_PHY_BASE_ADR, &oui, &model, &rev)) - return; - - /* check for Marvell 88E1118R Gigabit PHY (PIGGY3) */ - if (oui == PHY_MARVELL_OUI && - model == PHY_MARVELL_88E1118R_MODEL) { - /* set page register to 3 */ - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, - PHY_MARVELL_PAGE_REG, - PHY_MARVELL_88E1118R_LED_CTRL_PAGE)) - printf("Error writing PHY page reg\n"); - - /* - * leds setup as printed on PCB: - * LED2 (Link): 0x0 (On Link, Off No Link) - * LED1 (Activity): 0x3 (On Activity, Off No Activity) - * LED0 (Speed): 0x7 (On 1000 MBits, Off Else) - */ - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, - PHY_MARVELL_88E1118R_LED_CTRL_REG, - PHY_MARVELL_88E1118R_LED_CTRL_RESERVED | - PHY_MARVELL_88E1118R_LED_CTRL_LED0_1000MB | - PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT | - PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK)) - printf("Error writing PHY LED reg\n"); - - /* set page register back to 0 */ - if (miiphy_write(name, CONFIG_PHY_BASE_ADR, - PHY_MARVELL_PAGE_REG, - PHY_MARVELL_DEFAULT_PAGE)) - printf("Error writing PHY page reg\n"); - } -} -#endif - -#if defined(CONFIG_HUSH_INIT_VAR) -int hush_init_var(void) -{ - ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); - return 0; -} -#endif - -#if defined(CONFIG_SYS_I2C_SOFT) -void set_sda(int state) -{ - I2C_ACTIVE; - I2C_SDA(state); -} - -void set_scl(int state) -{ - I2C_SCL(state); -} - -int get_sda(void) -{ - I2C_TRISTATE; - return I2C_READ; -} - -int get_scl(void) -{ - return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0; -} -#endif - -#if defined(CONFIG_POST) - -#define KM_POST_EN_L 44 -#define POST_WORD_OFF 8 - -int post_hotkeys_pressed(void) -{ - if (IS_ENABLED(CONFIG_KM_COGE5UN)) - return kw_gpio_get_value(KM_POST_EN_L); - else - return !kw_gpio_get_value(KM_POST_EN_L); -} - -ulong post_word_load(void) -{ - void *addr = (void *)(gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF); - - return in_le32(addr); - -} -void post_word_store(ulong value) -{ - void *addr = (void *)(gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF); - - out_le32(addr, value); -} - -int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset) -{ - *vstart = CONFIG_SYS_SDRAM_BASE; - - /* we go up to relocation plus a 1 MB margin */ - *size = CONFIG_SYS_TEXT_BASE - (1 << 20); - - return 0; -} -#endif - -#if defined(CONFIG_SYS_EEPROM_WREN) -int eeprom_write_enable(unsigned int dev_addr, int state) -{ - kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state); - - return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP); -} -#endif diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg deleted file mode 100644 index d850e10..0000000 --- a/board/keymile/km_arm/kwbimage-memphis.cfg +++ /dev/null @@ -1,179 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2010 -# Heiko Schocher, DENX Software Engineering, hs(a)denx.de. -# -# (C) Copyright 2011 -# Valentin Longchamp, Keymile AG, valentin.longchamp(a)keymile.com -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -DATA 0xFFD10000 0x01112222 # MPP Control 0 Register -# bit 3-0: MPPSel0 2, NF_IO[2] -# bit 7-4: MPPSel1 2, NF_IO[3] -# bit 12-8: MPPSel2 2, NF_IO[4] -# bit 15-12: MPPSel3 2, NF_IO[5] -# bit 19-16: MPPSel4 1, NF_IO[6] -# bit 23-20: MPPSel5 1, NF_IO[7] -# bit 27-24: MPPSel6 1, SYSRST_O -# bit 31-28: MPPSel7 0, GPO[7] - -DATA 0xFFD10004 0x03303300 - -DATA 0xFFD10008 0x00001100 # MPP Control 2 Register -# bit 3-0: MPPSel16 0, GPIO[16] -# bit 7-4: MPPSel17 0, GPIO[17] -# bit 12-8: MPPSel18 1, NF_IO[0] -# bit 15-12: MPPSel19 1, NF_IO[1] -# bit 19-16: MPPSel20 0, GPIO[20] -# bit 23-20: MPPSel21 0, GPIO[21] -# bit 27-24: MPPSel22 0, GPIO[22] -# bit 31-28: MPPSel23 0, GPIO[23] - -DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register -DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register -DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register - -# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! -# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage - -#Dram initalization -DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register -# bit13-0: 0x4E0 (DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x38543000 # DDR Controller Control Low -# bit 3-0: 0 reserved -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=4 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 8= CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x2302433E # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000A3E # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x00000001 # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 00, Cs0size=2Gb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000652 # DDR Mode -DATA 0xFFD01420 0x00000006 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strenght reduced -# bit2: 1, DDR ODT control lsd disabled -# bit5-3: 000, required -# bit6: 0, DDR ODT control msb disabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add a sample stage -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00084520 # DDR2 SDRAM Timing Low -# bit3-0 : 0000, required -# bit7-4 : 0010, M_ODT assertion 2 cycles after read -# bit11-8 : 0101, M_ODT de-assertion 5 cycles after read -# bit15-12: 0100, internal ODT assertion 4 cycles after read -# bit19-16: 1000, internal ODT de-assertion 8 cycles after read -# bit31-20: 0 , required - -DATA 0xFFD0147c 0x00008451 # DDR2 SDRAM Timing High -# bit3-0 : 0001, M_ODT assertion same cycle as write -# bit7-4 : 0101, M_ODT de-assertion x cycles after write -# bit11-8 : 0100, internal ODT assertion x cycles after write -# bit15-12: 1000, internal ODT de-assertion x cycles after write - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit3-0: 0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0 -# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 00, ODT1 controlled by register -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000F801 # CPU ODT Control -# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0 -# bit9-8: 0, ODTEn, controlled by ODT0Rd and ODT0Wr -# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm -# bit13-12:3, STARTBURST ODT buffer selected, 50 ohm -# bit14 :1, STARTBURST ODT enabled -# bit15 :1, Use ODT Block - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -# bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg deleted file mode 100644 index 6b62ce0..0000000 --- a/board/keymile/km_arm/kwbimage.cfg +++ /dev/null @@ -1,161 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2010 -# Heiko Schocher, DENX Software Engineering, hs(a)denx.de. -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -DATA 0xFFD10000 0x01112222 # MPP Control 0 Register -# bit 3-0: MPPSel0 2, NF_IO[2] -# bit 7-4: MPPSel1 2, NF_IO[3] -# bit 12-8: MPPSel2 2, NF_IO[4] -# bit 15-12: MPPSel3 2, NF_IO[5] -# bit 19-16: MPPSel4 1, NF_IO[6] -# bit 23-20: MPPSel5 1, NF_IO[7] -# bit 27-24: MPPSel6 1, SYSRST_O -# bit 31-28: MPPSel7 0, GPO[7] - -DATA 0xFFD10004 0x03303300 - -DATA 0xFFD10008 0x00001100 # MPP Control 2 Register -# bit 3-0: MPPSel16 0, GPIO[16] -# bit 7-4: MPPSel17 0, GPIO[17] -# bit 12-8: MPPSel18 1, NF_IO[0] -# bit 15-12: MPPSel19 1, NF_IO[1] -# bit 19-16: MPPSel20 0, GPIO[20] -# bit 23-20: MPPSel21 0, GPIO[21] -# bit 27-24: MPPSel22 0, GPIO[22] -# bit 31-28: MPPSel23 0, GPIO[23] - -DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register -DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register -DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register - -# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! -# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage - -#Dram initalization -DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register -# bit13-0: 0x400 (DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x39543000 # DDR Controller Control Low -# bit 3-0: 0 reserved -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 3=recommended value for CL=3 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 6= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x34136552 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000033 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x0000000D # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000652 # DDR Mode -DATA 0xFFD01420 0x00000044 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 1, DDR ODT control lsd disabled -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, enabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 0 , no sample stage -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required -DATA 0xFFD01428 0x00074510 -DATA 0xFFD0147c 0x00007451 - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x07, Size (i.e. 128MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010001 # DDR ODT Control (Low) -# bit3-0: 0, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:0, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 00, ODT1 controlled by register -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000FC11 # CPU ODT Control -# bit3-0: F, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 0, ODT0Wr, Internal ODT asserted during write to DRAM bank0 -# bit9-8: 1, ODTEn, never active -# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -# bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/keymile/km_arm/kwbimage_128M16_1.cfg b/board/keymile/km_arm/kwbimage_128M16_1.cfg deleted file mode 100644 index e30c0fe..0000000 --- a/board/keymile/km_arm/kwbimage_128M16_1.cfg +++ /dev/null @@ -1,257 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2010 -# Heiko Schocher, DENX Software Engineering, hs(a)denx.de. -# -# (C) Copyright 2012 -# Valentin Longchamp, Keymile AG, valentin.longchamp(a)keymile.com -# Stefan Bigler, Keymile AG, stefan.bigler(a)keymile.com -# -# (C) Copyright 2012 -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -DATA 0xFFD10000 0x01112222 # MPP Control 0 Register -# bit 3-0: 2, MPPSel0 SPI_CSn (1=NF_IO[2]) -# bit 7-4: 2, MPPSel1 SPI_SI (1=NF_IO[3]) -# bit 12-8: 2, MPPSel2 SPI_SCK (1=NF_IO[4]) -# bit 15-12: 2, MPPSel3 SPI_SO (1=NF_IO[5]) -# bit 19-16: 1, MPPSel4 NF_IO[6] -# bit 23-20: 1, MPPSel5 NF_IO[7] -# bit 27-24: 1, MPPSel6 SYSRST_O -# bit 31-28: 0, MPPSel7 GPO[7] - -DATA 0xFFD10004 0x03303300 # MPP Control 1 Register -# bit 3-0: 0, MPPSel8 GPIO[8] -# bit 7-4: 0, MPPSel9 GPIO[9] -# bit 12-8: 3, MPPSel10 UA0_TXD -# bit 15-12: 3, MPPSel11 UA0_RXD -# bit 19-16: 0, MPPSel12 not connected -# bit 23-20: 3, MPPSel13 UA1_TXD -# bit 27-24: 3, MPPSel14 UA1_RXD -# bit 31-28: 0, MPPSel15 GPIO[15] - -DATA 0xFFD10008 0x00001100 # MPP Control 2 Register -# bit 3-0: 0, MPPSel16 GPIO[16] -# bit 7-4: 0, MPPSel17 not connected -# bit 12-8: 1, MPPSel18 NF_IO[0] -# bit 15-12: 1, MPPSel19 NF_IO[1] -# bit 19-16: 0, MPPSel20 GPIO[20] -# bit 23-20: 0, MPPSel21 GPIO[21] -# bit 27-24: 0, MPPSel22 GPIO[22] -# bit 31-28: 0, MPPSel23 GPIO[23] - -# MPP Control 3-6 Register untouched (MPP24-49) - -DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register -# bit 2-0: 3, Reserved -# bit 5-3: 3, Reserved -# bit 6: 0, Reserved -# bit 7: 0, RGMII-pads voltage = 3.3V -# bit 10-8: 3, Reserved -# bit 13-11: 3, Reserved -# bit 14: 0, Reserved -# bit 15: 0, MPP RGMII-pads voltage = 3.3V -# bit 31-16 0x1B1B, Reserved - -DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register -# bit 0-1: 2, Tag RAM RTC RAM0 -# bit 3-2: 1, Tag RAM WTC RAM0 -# bit 7-4: 6, Reserve -# bit 9-8: 2, Valid RAM RTC RAM -# bit 11-10: 1, Valid RAM WTC RAM -# bit 13-12: 2, Dirty RAM RTC RAM -# bit 15-14: 1, Dirty RAM WTC RAM -# bit 17-16: 2, Data RAM RTC RAM0 -# bit 19-18: 1, Data RAM WTC RAM0 -# bit 21-20: 2, Data RAM RTC RAM1 -# bit 23-22: 1, Data RAM WTC RAM1 -# bit 25-24: 2, Data RAM RTC RAM2 -# bit 27-26: 1, Data RAM WTC RAM2 -# bit 29-28: 2, Data RAM RTC RAM3 -# bit 31-30: 1, Data RAM WTC RAM4 - -DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -# bit 15-0: ???, Reserve -# bit 17-16: 2, ECC RAM RTC RAM0 -# bit 19-18: 1, ECC RAM WTC RAM0 -# bit 31-20: ???,Reserve - -# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! -# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage - -# SDRAM initalization -DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register -# bit 13-0: 0x4E0, DDR2 clks refresh rate -# bit 14: 0, reserved -# bit 15: 0, reserved -# bit 16: 0, CPU to Dram Write buffer policy -# bit 17: 0, Enable Registered DIMM or Equivalent Sampling Logic -# bit 19-18: 0, reserved -# bit 23-20: 0, reserved -# bit 24: 1, enable exit self refresh mode on DDR access -# bit 25: 1, required -# bit 29-26: 0, reserved -# bit 31-30: 1, reserved - -DATA 0xFFD01404 0x36543000 # DDR Controller Control Low -# bit 3-0: 0, reserved -# bit 4: 0, 2T mode =addr/cmd in same cycle -# bit 5: 0, clk is driven during self refresh, we don't care for APX -# bit 6: 0, use recommended falling edge of clk for addr/cmd -# bit 7-11: 0, reserved -# bit 12-13: 1, reserved, required 1 -# bit 14: 0, input buffer always powered up -# bit 17-15: 0, reserved -# bit 18: 1, cpu lock transaction enabled -# bit 19: 0, reserved -# bit 23-20: 5, recommended value for CL=4 and STARTBURST_DEL disabled bit31=0 -# bit 27-24: 6, CL+1, STARTBURST sample stages, for freqs 200-399MHz, unbuffered DIMM -# bit 30-28: 3, required -# bit 31: 0,no additional STARTBURST delay - -DATA 0xFFD01408 0x2302444e # DDR Timing (Low) (active cycles value +1) -# bit 3-0: 0xE, TRAS, 15 clk (45 ns) -# bit 7-4: 0x4, TRCD, 5 clk (15 ns) -# bit 11-8: 0x4, TRP, 5 clk (15 ns) -# bit 15-12: 0x4, TWR, 5 clk (15 ns) -# bit 19-16: 0x2, TWTR, 3 clk (7.5 ns) -# bit 20: 0, extended TRAS msb -# bit 23-21: 0, reserved -# bit 27-24: 0x3, TRRD, 4 clk (10 ns) -# bit 31-28: 0x2, TRTP, 3 clk (7.5 ns) - -DATA 0xFFD0140C 0x0000003e # DDR Timing (High) -# bit 6-0: 0x3E, TRFC, 63 clk (195 ns) -# bit 8-7: 0, TR2R -# bit 10-9: 0, TR2W -# bit 12-11: 0, TW2W -# bit 31-13: 0, reserved - -DATA 0xFFD01410 0x00000001 # DDR Address Control -# bit 1-0: 1, Cs0width=x16 -# bit 3-2: 0, Cs0size=2Gb -# bit 5-4: 0, Cs1width=nonexistent -# bit 7-6: 0, Cs1size =nonexistent -# bit 9-8: 0, Cs2width=nonexistent -# bit 11-10: 0, Cs2size =nonexistent -# bit 13-12: 0, Cs3width=nonexistent -# bit 15-14: 0, Cs3size =nonexistent -# bit 16: 0, Cs0AddrSel -# bit 17: 0, Cs1AddrSel -# bit 18: 0, Cs2AddrSel -# bit 19: 0, Cs3AddrSel -# bit 31-20: 0, required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit 0: 0, OpenPage enabled -# bit 31-1: 0, required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit 3-0: 0, DDR cmd -# bit 31-4: 0, required - -DATA 0xFFD0141C 0x00000652 # DDR Mode -# bit 2-0: 2, Burst Length = 4 -# bit 3: 0, Burst Type -# bit 6-4: 5, CAS Latency = 5 -# bit 7: 0, Test mode -# bit 8: 0, DLL Reset -# bit 11-9: 3, Write recovery for auto-precharge must be 3 -# bit 12: 0, Active power down exit time, fast exit -# bit 14-13: 0, reserved -# bit 31-15: 0, reserved - -DATA 0xFFD01420 0x00000006 # DDR Extended Mode -# bit 0: 0, DDR DLL enabled -# bit 1: 1, DDR drive strength reduced -# bit 2: 1, DDR ODT control lsb, 75 ohm termination [RTT0] -# bit 5-3: 0, required -# bit 6: 0, DDR ODT control msb, 75 ohm termination [RTT1] -# bit 9-7: 0, required -# bit 10: 0, differential DQS enabled -# bit 11: 0, required -# bit 12: 0, DDR output buffer enabled -# bit 31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit 2-0: 7, required -# bit 3: 1, MBUS Burst Chop disabled -# bit 6-4: 7, required -# bit 7: 0, reserved -# bit 8: 1, add sample stage required for f > 266 MHz -# bit 9: 0, no half clock cycle addition to dataout -# bit 10: 0, 1/4 clock cycle skew enabled for addr/ctl signals -# bit 11: 0, 1/4 clock cycle skew disabled for write mesh -# bit 15-12:0xf, required -# bit 31-16: 0, required - -DATA 0xFFD01428 0x00084520 # DDR2 SDRAM Timing Low -# bit 3-0: 0, required -# bit 7-4: 2, M_ODT assertion 2 cycles after read start command -# bit 11-8: 5, M_ODT de-assertion 5 cycles after read start command -# (ODT turn off delay 2,5 clk cycles) -# bit 15-12: 4, internal ODT time based on bit 7-4 -# with the considered SDRAM internal delay -# bit 19-16: 8, internal ODT de-assertion based on bit 11-8 -# with the considered SDRAM internal delay -# bit 31-20: 0, required - -DATA 0xFFD0147c 0x00008452 # DDR2 SDRAM Timing High -# bit 3-0: 2, M_ODT assertion same as bit 11-8 -# bit 7-4: 5, M_ODT de-assertion same as bit 15-12 -# bit 11-8: 4, internal ODT assertion 2 cycles after write start command -# with the considered SDRAM internal delay -# bit 15-12: 8, internal ODT de-assertion 5 cycles after write start command -# with the considered SDRAM internal delay - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -# bit 23-0: 0, reserved -# bit 31-24: 0, CPU CS Window0 Base Address, addr bits [31:24] - -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit 0: 1, Window enabled -# bit 1: 0, Write Protect disabled -# bit 3-2: 0, CS0 hit selected -# bit 23-4:ones, required -# bit 31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit 3-0: 0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0 -# bit 7-4: 0, ODT0Rd, MODT[1] not asserted -# bit 11-8: 0, required -# big 15-11: 0, required -# bit 19-16: 1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 -# bit 23-20: 0, ODT0Wr, MODT[1] not asserted -# bit 27-24: 0, required -# bit 31-28: 0, required - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit 1-0: 0, ODT0 controlled by ODT Control (low) register above -# bit 3-2: 0, ODT1 controlled by register -# bit 31-4: 0, required - -DATA 0xFFD0149C 0x0000E801 # CPU ODT Control -# bit 3-0: 1, ODTRd, Internal ODT asserted during read from DRAM bank0 -# bit 7-4: 0, ODTWr, Internal ODT not asserted during write to DRAM -# bit 9-8: 0, ODTEn, controlled by ODTRd and ODTWr -# bit 11-10: 2, DQ_ODTSel. ODT select turned on, 75 ohm -# bit 13-12: 2, STARTBURST ODT buffer selected, 75 ohm -# bit 14: 1, STARTBURST ODT enabled -# bit 15: 1, Use ODT Block - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -# bit 0: 1, enable DDR init upon this register write -# bit 31-1: 0, reserved - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/keymile/km_arm/kwbimage_256M8_1.cfg b/board/keymile/km_arm/kwbimage_256M8_1.cfg deleted file mode 100644 index 91ea5f0..0000000 --- a/board/keymile/km_arm/kwbimage_256M8_1.cfg +++ /dev/null @@ -1,257 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2012 -# Stefan Bigler, Keymile AG, stefan.bigler(a)keymile.com -# Norbert Mayer, Keymile AG, norbert.mayer(a)keymile.com -# Deepak Patel, XENTECH Limited, deepak.patel(a)xentech.co.uk -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# -# This configuration applies to COGE5 design (ARM-part) -# Two 8-Bit devices are connected on the 16-Bit bus on the same -# chip-select. The supported devices are -# MT47H256M8EB-3IT:C -# MT47H256M8EB-25EIT:C - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -DATA 0xFFD10000 0x01112222 # MPP Control 0 Register -# bit 3-0: 2, MPPSel0 SPI_CSn (1=NF_IO[2]) -# bit 7-4: 2, MPPSel1 SPI_MOSI (1=NF_IO[3]) -# bit 12-8: 2, MPPSel2 SPI_SCK (1=NF_IO[4]) -# bit 15-12: 2, MPPSel3 SPI_MISO (1=NF_IO[5]) -# bit 19-16: 1, MPPSel4 NF_IO[6] -# bit 23-20: 1, MPPSel5 NF_IO[7] -# bit 27-24: 1, MPPSel6 SYSRST_O -# bit 31-28: 0, MPPSel7 GPO[7] - -DATA 0xFFD10004 0x03303300 # MPP Control 1 Register -# bit 3-0: 0, MPPSel8 GPIO[8] CPU_SDA bitbanged -# bit 7-4: 0, MPPSel9 GPIO[9] CPU_SCL bitbanged -# bit 12-8: 3, MPPSel10 UA0_TXD -# bit 15-12: 3, MPPSel11 UA0_RXD -# bit 19-16: 0, MPPSel12 not connected -# bit 23-20: 3, MPPSel13 GPIO[14] -# bit 27-24: 3, MPPSel14 GPIO[15] -# bit 31-28: 0, MPPSel15 GPIO[16] BOOT_FL_SEL (SPI-MUX Signal) - -DATA 0xFFD10008 0x00001100 # MPP Control 2 Register -# bit 3-0: 0, MPPSel16 GPIO[16] -# bit 7-4: 0, MPPSel17 not connected -# bit 11-8: 1, MPPSel18 NF_IO[0] -# bit 15-12: 1, MPPSel19 NF_IO[1] -# bit 19-16: 0, MPPSel20 GPIO[20] -# bit 23-20: 0, MPPSel21 GPIO[21] -# bit 27-24: 0, MPPSel22 GPIO[22] -# bit 31-28: 0, MPPSel23 GPIO[23] - -# MPP Control 3-6 Register untouched (MPP24-49) - -DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register -# bit 2-0: 3, Reserved -# bit 5-3: 3, Reserved -# bit 6: 0, Reserved -# bit 7: 0, RGMII-pads voltage = 3.3V -# bit 10-8: 3, Reserved -# bit 13-11: 3, Reserved -# bit 14: 0, Reserved -# bit 15: 0, MPP RGMII-pads voltage = 3.3V -# bit 31-16 0x1B1B, Reserved - -DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register -# bit 0-1: 2, Tag RAM RTC RAM0 -# bit 3-2: 1, Tag RAM WTC RAM0 -# bit 7-4: 6, Reserved -# bit 9-8: 2, Valid RAM RTC RAM -# bit 11-10: 1, Valid RAM WTC RAM -# bit 13-12: 2, Dirty RAM RTC RAM -# bit 15-14: 1, Dirty RAM WTC RAM -# bit 17-16: 2, Data RAM RTC RAM0 -# bit 19-18: 1, Data RAM WTC RAM0 -# bit 21-20: 2, Data RAM RTC RAM1 -# bit 23-22: 1, Data RAM WTC RAM1 -# bit 25-24: 2, Data RAM RTC RAM2 -# bit 27-26: 1, Data RAM WTC RAM2 -# bit 29-28: 2, Data RAM RTC RAM3 -# bit 31-30: 1, Data RAM WTC RAM4 - -DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -# bit 15-0: ?, Reserved -# bit 17-16: 2, ECC RAM RTC RAM0 -# bit 19-18: 1, ECC RAM WTC RAM0 -# bit 31-20: ?,Reserved - -# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! -# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage - -# SDRAM initalization -DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register -# bit 13-0: 0x4E0, DDR2 clks refresh rate -# bit 14: 0, reserved -# bit 15: 0, reserved -# bit 16: 0, CPU to Dram Write buffer policy -# bit 17: 0, Enable Registered DIMM or Equivalent Sampling Logic -# bit 19-18: 0, reserved -# bit 23-20: 0, reserved -# bit 24: 1, enable exit self refresh mode on DDR access -# bit 25: 1, required -# bit 29-26: 0, reserved -# bit 31-30: 1, reserved - -DATA 0xFFD01404 0x36543000 # DDR Controller Control Low -# bit 3-0: 0, reserved -# bit 4: 0, 2T mode =addr/cmd in same cycle -# bit 5: 0, clk is driven during self refresh, we don't care for APX -# bit 6: 0, use recommended falling edge of clk for addr/cmd -# bit 7-11: 0, reserved -# bit 12-13: 1, reserved, required 1 -# bit 14: 0, input buffer always powered up -# bit 17-15: 0, reserved -# bit 18: 1, cpu lock transaction enabled -# bit 19: 0, reserved -# bit 23-20: 5, recommended value for CL=4 and STARTBURST_DEL disabled bit31=0 -# bit 27-24: 6, CL+1, STARTBURST sample stages, freq 200-399MHz, unbuffer DIMM -# bit 30-28: 3, required -# bit 31: 0, no additional STARTBURST delay - -DATA 0xFFD01408 0x2202444E # DDR Timing (Low) (active cycles value +1) -# bit 3-0: 0xe, TRAS = 45ns -> 15 clk cycles -# bit 7-4: 0x4, TRCD = 15ns -> 5 clk cycles -# bit 11-8: 0x4, TRP = 15ns -> 5 clk cycles -# bit 15-12: 0x4, TWR = 15ns -> 5 clk cycles -# bit 19-16: 0x2, TWTR = 7,5ns -> 3 clk cycles -# bit 20: 0, extended TRAS msb -# bit 23-21: 0, reserved -# bit 27-24: 0x2, TRRD = 7,5ns -> 3 clk cycles -# bit 31-28: 0x2, TRTP = 7,5ns -> 3 clk cycles - -DATA 0xFFD0140C 0x0000003E # DDR Timing (High) -# bit 6-0: 0x3E, TRFC = 195ns -> 63 clk cycles -# bit 8-7: 0, TR2R -# bit 10-9: 0, TR2W -# bit 12-11: 0, TW2W -# bit 31-13: 0, reserved - -DATA 0xFFD01410 0x00000000 # DDR Address Control -# bit 1-0: 0, Cs0width=x8 (2 devices) -# bit 3-2: 0, Cs0size=2Gb -# bit 5-4: 0, Cs1width=nonexistent -# bit 7-6: 0, Cs1size =nonexistent -# bit 9-8: 0, Cs2width=nonexistent -# bit 11-10: 0, Cs2size =nonexistent -# bit 13-12: 0, Cs3width=nonexistent -# bit 15-14: 0, Cs3size =nonexistent -# bit 16: 0, Cs0AddrSel -# bit 17: 0, Cs1AddrSel -# bit 18: 0, Cs2AddrSel -# bit 19: 0, Cs3AddrSel -# bit 31-20: 0, required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit 0: 0, OpenPage enabled -# bit 31-1: 0, required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit 3-0: 0, DDR cmd -# bit 31-4: 0, required - -DATA 0xFFD0141C 0x00000652 # DDR Mode -# bit 2-0: 2, Burst Length = 4 -# bit 3: 0, Burst Type -# bit 6-4: 5, CAS Latency = 5 -# bit 7: 0, Test mode -# bit 8: 0, DLL Reset -# bit 11-9: 3, Write recovery for auto-precharge must be 3 -# bit 12: 0, Active power down exit time, fast exit -# bit 14-13: 0, reserved -# bit 31-15: 0, reserved - -DATA 0xFFD01420 0x00000006 # DDR Extended Mode -# bit 0: 0, DDR DLL enabled -# bit 1: 1, DDR drive strenght reduced -# bit 2: 1, DDR ODT control lsb, 75ohm termination [RTT0] -# bit 5-3: 0, required -# bit 6: 0, DDR ODT control msb, 75ohm termination [RTT1] -# bit 9-7: 0, required -# bit 10: 0, differential DQS enabled -# bit 11: 0, required -# bit 12: 0, DDR output buffer enabled -# bit 31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit 2-0: 7, required -# bit 3: 1, MBUS Burst Chop disabled -# bit 6-4: 7, required -# bit 7: 0, reserved -# bit 8: 1, add sample stage required for > 266Mhz -# bit 9: 0, no half clock cycle addition to dataout -# bit 10: 0, 1/4 clock cycle skew enabled for addr/ctl signals -# bit 11: 0, 1/4 clock cycle skew disabled for write mesh -# bit 15-12:0xf, required -# bit 31-16: 0, required - -DATA 0xFFD01428 0x00084520 # DDR2 SDRAM Timing Low -# bit 3-0: 0, required -# bit 7-4: 2, M_ODT assertion 2 cycles after read start command -# bit 11-8: 5, M_ODT de-assertion 5 cycles after read start command -# (ODT turn off delay 2,5 clk cycles) -# bit 15-12: 4, internal ODT time based on bit 7-4 -# with the considered SDRAM internal delay -# bit 19-16: 8, internal ODT de-assertion based on bit 11-8 -# with the considered SDRAM internal delay -# bit 31-20: 0, required - -DATA 0xFFD0147c 0x00008452 # DDR2 SDRAM Timing High -# bit 3-0: 2, M_ODT assertion same as bit 11-8 -# bit 7-4: 5, M_ODT de-assertion same as bit 15-12 -# bit 11-8: 4, internal ODT assertion 2 cycles after write start command -# with the considered SDRAM internal delay -# bit 15-12: 8, internal ODT de-assertion 5 cycles after write start command -# with the considered SDRAM internal delay - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -# bit 23-0: 0, reserved -# bit 31-24: 0, CPU CS Window0 Base Address, addr bits [31:24] - -DATA 0xFFD01504 0x1FFFFFF1 # CS[0]n Size -# bit 0: 1, Window enabled -# bit 1: 0, Write Protect disabled -# bit 3-2: 0, CS0 hit selected -# bit 23-4:ones, required -# bit 31-24:0x1F, Size (i.e. 512MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) -# bit 3-0: 0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0 -# bit 7-4: 0, ODT0Rd, MODT[1] not asserted -# bit 11-8: 0, required -# big 15-11: 0, required -# bit 19-16: 1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 -# bit 23-20: 0, ODT0Wr, MODT[1] not asserted -# bit 27-24: 0, required -# bit 31-28: 0, required - -DATA 0xFFD01498 0x00000004 # DDR ODT Control (High) -# bit 1-0: 0, ODT0 controlled by ODT Control (low) register above -# bit 3-2: 1, ODT1 never active -# bit 31-4: 0, required - -DATA 0xFFD0149C 0x0000E801 # CPU ODT Control -# bit 3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit 7-4: 0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0 -# bit 9-8: 0, ODTEn, controlled by ODT0Rd and ODT0Wr -# bit 11-10: 2, DQ_ODTSel. ODT select turned on, 75 ohm -# bit 13-12: 2, STARTBURST ODT buffer selected, 75 ohm -# bit 14: 1, STARTBURST ODT enabled -# bit 15: 1, Use ODT Block - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -# bit 0: 1, enable DDR init upon this register write -# bit 31-1: 0, reserved - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt index 4384c0d..1bdff2f 100644 --- a/board/keymile/scripts/develop-common.txt +++ b/board/keymile/scripts/develop-common.txt @@ -8,5 +8,5 @@ tftpkernel=tftpboot ${load_addr_r} ${tftppath}/${uimage} toolchain=/opt/eldk rootfssize=0 set_uimage=printenv uimage || setenv uimage uImage -set_tftppath=if test ${hostname} = kmcoge5un; then setenv tftppath CI5UN; else if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi; fi +set_tftppath=if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi try_import_nfs_path=if tftpboot ${load_addr_r} ${tftppath}/nfs-path.txt; then env import -t ${load_addr_r} ${filesize}; else echo no auto nfs path imported; echo you can set nfsargs in /tftpboot/${tftppath}/nfs-path.txt and rerun develop; fi diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig deleted file mode 100644 index 054038f..0000000 --- a/configs/km_kirkwood_128m16_defconfig +++ /dev/null @@ -1,81 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_TARGET_KM_KIRKWOOD=y -# CONFIG_KIRKWOOD_PCIE_INIT is not set -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_ENV_OFFSET_REDUND=0x2000 -CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood 128M16" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_KM_KIRKWOOD_128M16=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_EEPROM=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_KIRKWOOD_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_SOFT=y -CONFIG_SYS_I2C_SOFT_SLAVE=0x0 -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig deleted file mode 100644 index ac2deeb..0000000 --- a/configs/km_kirkwood_defconfig +++ /dev/null @@ -1,81 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage.cfg" -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_TARGET_KM_KIRKWOOD=y -# CONFIG_KIRKWOOD_PCIE_INIT is not set -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_ENV_OFFSET_REDUND=0x2000 -CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_KM_KIRKWOOD=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_EEPROM=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_KIRKWOOD_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_SOFT=y -CONFIG_SYS_I2C_SOFT_SLAVE=0x0 -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig deleted file mode 100644 index 8074679..0000000 --- a/configs/km_kirkwood_pci_defconfig +++ /dev/null @@ -1,81 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage.cfg" -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_TARGET_KM_KIRKWOOD=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_ENV_OFFSET_REDUND=0x2000 -CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood PCI" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_KM_FPGA_CONFIG=y -CONFIG_KM_KIRKWOOD_PCI=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_EEPROM=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_KIRKWOOD_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_SOFT=y -CONFIG_SYS_I2C_SOFT_SLAVE=0x0 -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig deleted file mode 100644 index 5766f49..0000000 --- a/configs/kmcoge5un_defconfig +++ /dev/null @@ -1,84 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_256M8_1.cfg" -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_TARGET_KM_KIRKWOOD=y -# CONFIG_KIRKWOOD_PCIE_INIT is not set -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_ENV_OFFSET_REDUND=0xD0000 -CONFIG_IDENT_STRING="\nHitachi Power Grids COGE5UN" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 -CONFIG_KM_ENV_IS_IN_SPI_NOR=y -CONFIG_KM_PIGGY4_88E6352=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_KIRKWOOD_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_SOFT=y -CONFIG_SYS_I2C_SOFT_SLAVE=0x0 -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig deleted file mode 100644 index a309aca..0000000 --- a/configs/kmnusa_defconfig +++ /dev/null @@ -1,85 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_TARGET_KM_KIRKWOOD=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_ENV_OFFSET_REDUND=0xD0000 -CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_KM_FPGA_CONFIG=y -CONFIG_KM_ENV_IS_IN_SPI_NOR=y -CONFIG_KM_PIGGY4_88E6352=y -CONFIG_KM_NUSA=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_KIRKWOOD_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_SOFT=y -CONFIG_SYS_I2C_SOFT_SLAVE=0x0 -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MV88E6352_SWITCH=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/configs/kmsuse2_defconfig b/configs/kmsuse2_defconfig deleted file mode 100644 index de44deb..0000000 --- a/configs/kmsuse2_defconfig +++ /dev/null @@ -1,85 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_TARGET_KM_KIRKWOOD=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -CONFIG_ENV_OFFSET_REDUND=0xD0000 -CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood" -CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_KM_FPGA_CONFIG=y -CONFIG_KM_FPGA_FORCE_CONFIG=y -CONFIG_KM_FPGA_NO_RESET=y -CONFIG_KM_ENV_IS_IN_SPI_NOR=y -CONFIG_KM_SUSE2=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=32 -CONFIG_SYS_CBSIZE=512 -CONFIG_SYS_PBSIZE=532 -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -CONFIG_SYS_BOOTM_LEN=0x2000000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_BOOTP_BOOTFILESIZE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NETCONSOLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_KIRKWOOD_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_SOFT=y -CONFIG_SYS_I2C_SOFT_SLAVE=0x0 -CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h deleted file mode 100644 index a91e5e8..0000000 --- a/include/configs/km/km_arm.h +++ /dev/null @@ -1,158 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Prafulla Wadaskar <prafulla(a)marvell.com> - * - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * (C) Copyright 2010-2011 - * Heiko Schocher, DENX Software Engineering, hs(a)denx.de. - */ - -/* - * for linking errors see - * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html - */ - -#ifndef _CONFIG_KM_ARM_H -#define _CONFIG_KM_ARM_H - -#define CONFIG_NAND_ECC_BCH - -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" - -/* Increase max size of compressed kernel */ - -#include "asm/arch/config.h" - -/* architecture specific default bootargs */ -#define CONFIG_KM_DEF_BOOT_ARGS_CPU \ - "bootcountaddr=${bootcountaddr} ${mtdparts}" \ - " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" - -#define CONFIG_KM_DEF_ENV_CPU \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.kwb\0" \ - CONFIG_KM_UPDATE_UBOOT \ - "set_fdthigh=setenv fdt_high ${kernelmem}\0" \ - "checkfdt=" \ - "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \ - "then true; else setenv cramfsloadfdt true; " \ - "setenv boot bootm ${load_addr_r}; " \ - "echo No FDT found, booting with the kernel " \ - "appended one; fi\0" \ - "" - -/* - * NAND Flash configuration - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Other required minimal configurations - */ - -/* - * Ethernet Driver configuration - */ -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer autoneg timeout */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - -/* - * I2C related stuff - */ -#undef CONFIG_I2C_MVTWSI -#define CONFIG_SYS_I2C_INIT_BOARD - -#define CONFIG_SYS_NUM_I2C_BUSES 6 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ - } - -#ifndef __ASSEMBLY__ -#include <asm/arch/gpio.h> -#include <linux/delay.h> -#include <linux/stringify.h> -extern void __set_direction(unsigned pin, int high); -#define KM_KIRKWOOD_SDA_PIN 8 -#define KM_KIRKWOOD_SCL_PIN 9 -#define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300 -#define KM_KIRKWOOD_ENV_WP 38 - -#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) -#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) -#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) -#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) -#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) -#endif - -#define I2C_DELAY udelay(1) -#define I2C_SOFT_DECLARATIONS - -/* - * Environment variables configurations - */ -#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ -#else -#define CONFIG_SYS_EEPROM_WREN -#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */ -#endif - -#define KM_FLASH_GPIO_PIN 16 - -#define CONFIG_KM_UPDATE_UBOOT \ - "update=" \ - "sf probe 0;sf erase 0 +${filesize};" \ - "sf write ${load_addr_r} 0 ${filesize};\0" - -#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_KM_NEW_ENV \ - "newenv=sf probe 0;" \ - "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ - __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" -#else -#define CONFIG_KM_NEW_ENV \ - "newenv=setenv addr 0x100000 && " \ - "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \ - "mw.b ${addr} 0 4 && " \ - "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \ - " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ - "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \ - " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" -#endif - -#ifndef CONFIG_KM_BOARD_EXTRA_ENV -#define CONFIG_KM_BOARD_EXTRA_ENV "" -#endif - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_BOARD_EXTRA_ENV \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_NEW_ENV \ - "arch=arm\0" \ - "" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* address for the bootcount (taken from end of RAM) */ -#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) - -/* enable POST tests */ -#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) -#define CONFIG_POST_SKIP_ENV_FLAGS -#define CONFIG_POST_EXTERNAL_WORD_FUNCS - -#endif /* _CONFIG_KM_ARM_H */ diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h deleted file mode 100644 index 01482d5..0000000 --- a/include/configs/km_kirkwood.h +++ /dev/null @@ -1,118 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Prafulla Wadaskar <prafulla(a)marvell.com> - * - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr(a)denx.de. - * - * (C) Copyright 2011-2012 - * Holger Brunck, Keymile GmbH Hannover, holger.brunck(a)keymile.com - * Valentin Longchamp, Keymile AG, valentin.longchamp(a)keymile.com - */ - -/* - * for linking errors see - * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html - */ - -#ifndef _CONFIG_KM_KIRKWOOD_H -#define _CONFIG_KM_KIRKWOOD_H - -/* KM_KIRKWOOD */ -#if defined(CONFIG_KM_KIRKWOOD) -#define CONFIG_HOSTNAME "km_kirkwood" - -/* KM_KIRKWOOD_PCI */ -#elif defined(CONFIG_KM_KIRKWOOD_PCI) -#define CONFIG_HOSTNAME "km_kirkwood_pci" -#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE - -/* KM_KIRKWOOD_128M16 */ -#elif defined(CONFIG_KM_KIRKWOOD_128M16) -#define CONFIG_HOSTNAME "km_kirkwood_128m16" - -/* KM_NUSA */ -#elif defined(CONFIG_KM_NUSA) - -#define CONFIG_HOSTNAME "kmnusa" - -/* KMCOGE5UN */ -#elif defined(CONFIG_KM_COGE5UN) -#define CONFIG_HOSTNAME "kmcoge5un" - -/* KM_SUSE2 */ -#elif defined(CONFIG_KM_SUSE2) -#define CONFIG_HOSTNAME "kmsuse2" -#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE -#else -#error ("Board unsupported") -#endif - -/* include common defines/options for all arm based Keymile boards */ -#include "km/km_arm.h" - -#if defined(CONFIG_KM_PIGGY4_88E6352) -/* - * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via - * an Marvell 88E6352 simple switch. - * In this case we have to change the default settings for the etherent mac. - * There is NO ethernet phy. The ARM and Switch are conencted directly over - * RGMII in MAC-MAC mode - * In this case 1GBit full duplex and autoneg off - */ -#define PORT_SERIAL_CONTROL_VALUE ( \ - MVGBE_FORCE_LINK_PASS | \ - MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - MVGBE_ADV_NO_FLOW_CTRL | \ - MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - MVGBE_FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* Reserved bit has to be 1 */ | \ - MVGBE_DO_NOT_FORCE_LINK_FAIL | \ - MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ - MVGBE_DTE_ADV_0 | \ - MVGBE_MIIPHY_MAC_MODE | \ - MVGBE_AUTO_NEG_NO_CHANGE | \ - MVGBE_MAX_RX_PACKET_1552BYTE | \ - MVGBE_CLR_EXT_LOOPBACK | \ - MVGBE_SET_FULL_DUPLEX_MODE | \ - MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ - MVGBE_SET_GMII_SPEED_TO_1000 |\ - MVGBE_SET_MII_SPEED_TO_100) - -#endif - -#ifdef CONFIG_KM_PIGGY4_88E6061 -/* - * Some keymile boards like mgcoge5un have their PIGGY4 connected via - * an Marvell 88E6061 simple switch. - * In this case we have to change the default settings for the - * ethernet phy connected to the kirkwood. - * In this case 100MB full duplex and autoneg off - */ -#define PORT_SERIAL_CONTROL_VALUE ( \ - MVGBE_FORCE_LINK_PASS | \ - MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - MVGBE_ADV_NO_FLOW_CTRL | \ - MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - MVGBE_FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* Reserved bit has to be 1 */ | \ - MVGBE_DO_NOT_FORCE_LINK_FAIL | \ - MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ - MVGBE_DTE_ADV_0 | \ - MVGBE_MIIPHY_MAC_MODE | \ - MVGBE_AUTO_NEG_NO_CHANGE | \ - MVGBE_MAX_RX_PACKET_1552BYTE | \ - MVGBE_CLR_EXT_LOOPBACK | \ - MVGBE_SET_FULL_DUPLEX_MODE | \ - MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ - MVGBE_SET_GMII_SPEED_TO_10_100 |\ - MVGBE_SET_MII_SPEED_TO_100) -#endif - -#endif /* _CONFIG_KM_KIRKWOOD */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 4f628e0..648b91e 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -238,7 +238,6 @@ CONFIG_IRAM_BASE CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_IRAM_TOP -CONFIG_KM_BOARD_EXTRA_ENV CONFIG_KM_DEF_ARCH CONFIG_KM_DEF_BOOT_ARGS_CPU CONFIG_KM_DEF_ENV -- 1.8.3.1

2 2

[PATCH] MAINTAINERS: get rid of the optee variables entry
by Ilias Apalodimas 06 Oct '22

06 Oct '22

Since I am co-maintaining EFI with Heinrich remove the special entry for EFI variable storage via OP-TEE Signed-off-by: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> --- MAINTAINERS | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b4b185aacd43..a26b36c7c20d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -871,6 +871,7 @@ F: include/cp437.h F: include/efi* F: include/pe.h F: include/asm-generic/pe.h +F: include/mm_communication.h F: lib/charset.c F: lib/efi*/ F: test/lib/efi_* @@ -884,12 +885,6 @@ F: tools/efivar.py F: tools/file2include.c F: tools/mkeficapsule.c -EFI VARIABLES VIA OP-TEE -M: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> -S: Maintained -F: lib/efi_loader/efi_variable_tee.c -F: include/mm_communication.h - ENVIRONMENT M: Joe Hershberger <joe.hershberger(a)ni.com> R: Wolfgang Denk <wd(a)denx.de> -- 2.37.2

2 1

[PATCH 1/1] cmd: simplify do_env_set_efi()
by Heinrich Schuchardt 06 Oct '22

06 Oct '22

Use efi_convert_string() to convert a UTF-8 to a UTF-16 string. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- cmd/nvedit_efi.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/cmd/nvedit_efi.c b/cmd/nvedit_efi.c index 770877c527..0411b66559 100644 --- a/cmd/nvedit_efi.c +++ b/cmd/nvedit_efi.c @@ -383,7 +383,6 @@ int do_env_set_efi(struct cmd_tbl *cmdtp, int flag, int argc, u32 attributes; bool default_guid, verbose, value_on_memory; u16 *var_name16 = NULL, *p; - size_t len; efi_status_t ret; if (argc == 1) @@ -487,16 +486,13 @@ int do_env_set_efi(struct cmd_tbl *cmdtp, int flag, int argc, 16, 1, value, size, true); } - len = utf8_utf16_strnlen(var_name, strlen(var_name)); - var_name16 = malloc((len + 1) * 2); + var_name16 = efi_convert_string(var_name); if (!var_name16) { printf("## Out of memory\n"); ret = CMD_RET_FAILURE; goto out; } p = var_name16; - utf8_utf16_strncpy(&p, var_name, len + 1); - ret = efi_set_variable_int(var_name16, &guid, attributes, size, value, true); unmap_sysmem(value); -- 2.37.2

2 1