August 2021 - U-Boot

[PATCH 0/5] efi_loader: user EfiBootServicesData for device path
by Heinrich Schuchardt 24 Aug '21

24 Aug '21

When creating device paths or converting the device paths to text we must memory of type EfiBootServiceData. Change function definitions to use enums instead of int to avoid future misuse of constants. Heinrich Schuchardt (5): efi_loader: use an enum for the memory allocation types efi_loader rename enum efi_mem_type to efi_memory_type efi_loader: use correct type for AllocatePages, AllocatePool efi_loader: use EfiBootServicesData for device path efi_loader: use EfiBootServicesData for DP to text arch/x86/include/asm/hob.h | 2 +- include/efi.h | 36 +++++++++++++++++++----- include/efi_api.h | 2 +- include/efi_loader.h | 9 +++--- lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_device_path_to_text.c | 2 +- lib/efi_loader/efi_memory.c | 5 ++-- 7 files changed, 41 insertions(+), 17 deletions(-) -- 2.30.2

3 9

[u-boot-test-hooks PATCH] travis-ci: Add SiFive Unleashed QEMU targets
by Bin Meng 24 Aug '21

24 Aug '21

Add support for testing sifive_unleashed_defconfig via QEMU. QEMU supports booting exact the same images as used on the real hardware out of the box, that U-Boot SPL loads U-Boot proper from either an SD card or the SPI NOR flash, hence we can easily set up CI to cover these 2 boot flows of SiFive Unleashed board. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- bin/travis-ci/conf.sifive_unleashed_sdcard_qemu | 11 +++++++++++ bin/travis-ci/conf.sifive_unleashed_spi-nor_qemu | 11 +++++++++++ .../u_boot_boardenv_sifive_unleashed_sdcard_qemu.py | 10 ++++++++++ .../u_boot_boardenv_sifive_unleashed_spi-nor_qemu.py | 10 ++++++++++ 4 files changed, 42 insertions(+) create mode 100644 bin/travis-ci/conf.sifive_unleashed_sdcard_qemu create mode 100644 bin/travis-ci/conf.sifive_unleashed_spi-nor_qemu create mode 100644 py/travis-ci/u_boot_boardenv_sifive_unleashed_sdcard_qemu.py create mode 100644 py/travis-ci/u_boot_boardenv_sifive_unleashed_spi-nor_qemu.py diff --git a/bin/travis-ci/conf.sifive_unleashed_sdcard_qemu b/bin/travis-ci/conf.sifive_unleashed_sdcard_qemu new file mode 100644 index 0000000..f3c3da1 --- /dev/null +++ b/bin/travis-ci/conf.sifive_unleashed_sdcard_qemu @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2021 Bin Meng <bmeng.cn(a)gmail.com> + +console_impl=qemu +qemu_machine="sifive_u,msel=11" +qemu_binary="qemu-system-riscv64" +qemu_extra_args="-smp 5 -m 8G -nographic -nic user,tftp=${UBOOT_TRAVIS_BUILD_DIR}" +qemu_kernel_args="-bios ${U_BOOT_BUILD_DIR}/spl/u-boot-spl.bin -drive file=${U_BOOT_BUILD_DIR}/sdcard.img,if=sd" +reset_impl=none +flash_impl=none diff --git a/bin/travis-ci/conf.sifive_unleashed_spi-nor_qemu b/bin/travis-ci/conf.sifive_unleashed_spi-nor_qemu new file mode 100644 index 0000000..e28bfc4 --- /dev/null +++ b/bin/travis-ci/conf.sifive_unleashed_spi-nor_qemu @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2021 Bin Meng <bmeng.cn(a)gmail.com> + +console_impl=qemu +qemu_machine="sifive_u,msel=6" +qemu_binary="qemu-system-riscv64" +qemu_extra_args="-smp 5 -m 8G -nographic -nic user,tftp=${UBOOT_TRAVIS_BUILD_DIR}" +qemu_kernel_args="-bios ${U_BOOT_BUILD_DIR}/spl/u-boot-spl.bin -drive file=${U_BOOT_BUILD_DIR}/spi-nor.img,if=mtd" +reset_impl=none +flash_impl=none diff --git a/py/travis-ci/u_boot_boardenv_sifive_unleashed_sdcard_qemu.py b/py/travis-ci/u_boot_boardenv_sifive_unleashed_sdcard_qemu.py new file mode 100644 index 0000000..a86e0bd --- /dev/null +++ b/py/travis-ci/u_boot_boardenv_sifive_unleashed_sdcard_qemu.py @@ -0,0 +1,10 @@ +import os +import travis_tftp + +env__net_dhcp_server = True +env__net_tftp_readable_file = travis_tftp.file2env('u-boot') +env__efi_loader_helloworld_file = travis_tftp.file2env('lib/efi_loader/helloworld.efi') +env__efi_loader_grub_file = travis_tftp.file2env('grub_riscv64.efi') +env__efi_fit_tftp_file = { + "dn" : os.environ['UBOOT_TRAVIS_BUILD_DIR'], +} diff --git a/py/travis-ci/u_boot_boardenv_sifive_unleashed_spi-nor_qemu.py b/py/travis-ci/u_boot_boardenv_sifive_unleashed_spi-nor_qemu.py new file mode 100644 index 0000000..a86e0bd --- /dev/null +++ b/py/travis-ci/u_boot_boardenv_sifive_unleashed_spi-nor_qemu.py @@ -0,0 +1,10 @@ +import os +import travis_tftp + +env__net_dhcp_server = True +env__net_tftp_readable_file = travis_tftp.file2env('u-boot') +env__efi_loader_helloworld_file = travis_tftp.file2env('lib/efi_loader/helloworld.efi') +env__efi_loader_grub_file = travis_tftp.file2env('grub_riscv64.efi') +env__efi_fit_tftp_file = { + "dn" : os.environ['UBOOT_TRAVIS_BUILD_DIR'], +} -- 2.25.1

2 1

[u-boot-test-hooks PATCH] travis-ci: Correct the memory size for Xilinx Zynq QEMU
by Bin Meng 24 Aug '21

24 Aug '21

Currently the memory is specified to be an insane size of about 38TB. This happens to be not an issue with QEMU 4.2.0 which is what U-Boot CI is currently using, but it does not make newer QEMU (e.g.: 6.0.0) happy. Change it to use a 1G memory size. Fixes: 4fcc1d95a39f ("Add support for Xilinx Zynq Virtual platform") Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- bin/travis-ci/conf.xilinx_zynq_virt_qemu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/bin/travis-ci/conf.xilinx_zynq_virt_qemu b/bin/travis-ci/conf.xilinx_zynq_virt_qemu index eef7904..a6af659 100644 --- a/bin/travis-ci/conf.xilinx_zynq_virt_qemu +++ b/bin/travis-ci/conf.xilinx_zynq_virt_qemu @@ -21,7 +21,7 @@ console_impl=qemu qemu_machine="xilinx-zynq-a9" qemu_binary="qemu-system-arm" -qemu_extra_args="-display none -m 40000000 -nographic -serial /dev/null -serial mon:stdio -monitor null" +qemu_extra_args="-display none -m 1G -nographic -serial /dev/null -serial mon:stdio -monitor null" qemu_kernel_args="-device loader,file=${U_BOOT_BUILD_DIR}/u-boot-dtb.bin,addr=0x4000000,cpu-num=0" reset_impl=none flash_impl=none -- 2.25.1

2 1

[u-boot-test-hooks PATCH] Update Contributing.md with up-to-date information
by Bin Meng 24 Aug '21

24 Aug '21

As Stephen is no longer actively maintaining the uboot-test-hooks, and the repo itself has been moved to source.denx.de, update the Contributing.md with up-to-date information on how patches should be sent against this repo. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- Contributing.md | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/Contributing.md b/Contributing.md index e8bcfc4..b1f78a8 100644 --- a/Contributing.md +++ b/Contributing.md @@ -1,16 +1,14 @@ -To add patches to this repo, please either: +To add patches to this repo, please send the patch via email, at least: -a) Submit a github pull request. - -b) Send the patch via email, at least: - -To: swarren(a)nvidia.com +To: "Tom Rini <trini(a)konsulko.com>" Cc: u-boot(a)lists.denx.de -With a subject prefix of "[PATCH test hooks]", i.e.: +With a subject prefix of "[u-boot-test-hooks PATCH]", i.e.: + + git format-patch --subject-prefix='u-boot-test-hooks PATCH' ... - git format-patch --subject-prefix='PATCH test hooks' ... +or using patman with "Series-prefix: u-boot-test-hooks" to generate the patch. You will need to include a signed-off-by line in your patch. See https://developercertificate.org/ for the meaning of this. -- 2.25.1

2 1

[PATCH v2] imx8mm-cl-iot-gate: Split the defconfigs
by Fabio Estevam 24 Aug '21

24 Aug '21

Currently imx8mm-cl-iot-gate_defconfig fails to produce a working boot binary due to the lack of fip.bin: BINMAN all Image 'main-section' is missing external blobs and is non-functional: blob-ext Some images are invalid To make the build process more consistent with the other i.MX8M targets, split the defconfig in two: - imx8mm-cl-iot-gate_defconfig: standard defconfig that only requires ATF / DDR firmware. - imx8mm-cl-iot-gate-optee_defconfig: "more advanced" defconfig that requires ATF / Optee / mbedtls / DDR firmware. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- Changes since v1: - Fix typo in commit log - Add an entry in MAINTAINERS arch/arm/dts/Makefile | 2 + .../dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi | 255 ++++++++++++++++++ arch/arm/dts/imx8mm-cl-iot-gate-optee.dts | 6 + arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 14 +- arch/arm/mach-imx/imx8m/Kconfig | 7 + board/compulab/imx8mm-cl-iot-gate/Kconfig | 2 +- board/compulab/imx8mm-cl-iot-gate/MAINTAINERS | 1 + configs/imx8mm-cl-iot-gate-optee_defconfig | 147 ++++++++++ 8 files changed, 420 insertions(+), 14 deletions(-) create mode 100644 arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-cl-iot-gate-optee.dts create mode 100644 configs/imx8mm-cl-iot-gate-optee_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c42715ead4..88f52cd390 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1127,6 +1127,8 @@ dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb +dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb + dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb targets += $(dtb-y) diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi b/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi new file mode 100644 index 0000000000..3226a244a9 --- /dev/null +++ b/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +/ { + binman: binman { + multiple-images; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&{/soc@0} { + u-boot,dm-pre-reloc; + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; + u-boot,dm-pre-reloc; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + /delete-property/ assigned-clock-rates; +}; + +&osc_24m { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&aips1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&aips3 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pinctrl_uart3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2_gpio { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart3 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&usdhc3 { + u-boot,dm-spl; +}; + +&i2c1 { + u-boot,dm-spl; +}; + +&i2c2 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} { + u-boot,dm-spl; +}; + +&pinctrl_i2c2 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; +}; + +&fec1 { + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; +}; + +&wdog1 { + u-boot,dm-spl; +}; + +&binman { + u-boot-spl-ddr { + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + align-size = <4>; + align = <4>; + + u-boot-spl { + align-end = <4>; + }; + + blob_1: blob-ext@1 { + filename = "lpddr4_pmu_train_1d_imem.bin"; + size = <0x8000>; + }; + + blob_2: blob-ext@2 { + filename = "lpddr4_pmu_train_1d_dmem.bin"; + size = <0x4000>; + }; + + blob_3: blob-ext@3 { + filename = "lpddr4_pmu_train_2d_imem.bin"; + size = <0x8000>; + }; + + blob_4: blob-ext@4 { + filename = "lpddr4_pmu_train_2d_dmem.bin"; + size = <0x4000>; + }; + }; + + flash { + mkimage { + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000"; + + blob { + filename = "u-boot-spl-ddr.bin"; + }; + }; + }; + + itb { + filename = "u-boot.itb"; + + fit { + description = "Configuration to load ATF before U-Boot"; + #address-cells = <1>; + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; + + images { + uboot { + description = "U-Boot (64-bit)"; + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SYS_TEXT_BASE>; + + uboot_blob: blob-ext { + filename = "u-boot-nodtb.bin"; + }; + }; + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x920000>; + entry = <0x920000>; + + atf_blob: blob-ext { + filename = "bl31.bin"; + }; + }; + + fip { + description = "Trusted Firmware FIP"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x40310000>; + + fip_blob: blob-ext{ + filename = "fip.bin"; + }; + }; + + fdt { + description = "NAME"; + type = "flat_dt"; + compression = "none"; + + uboot_fdt_blob: blob-ext { + filename = "u-boot.dtb"; + }; + }; + }; + + configurations { + default = "conf"; + + conf { + description = "NAME"; + firmware = "uboot"; + loadables = "atf", "fip"; + fdt = "fdt"; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-optee.dts b/arch/arm/dts/imx8mm-cl-iot-gate-optee.dts new file mode 100644 index 0000000000..4d0ef46997 --- /dev/null +++ b/arch/arm/dts/imx8mm-cl-iot-gate-optee.dts @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include "imx8mm-cl-iot-gate.dts" diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi index 3226a244a9..00927c1574 100644 --- a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi @@ -217,18 +217,6 @@ }; }; - fip { - description = "Trusted Firmware FIP"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - load = <0x40310000>; - - fip_blob: blob-ext{ - filename = "fip.bin"; - }; - }; - fdt { description = "NAME"; type = "flat_dt"; @@ -246,7 +234,7 @@ conf { description = "NAME"; firmware = "uboot"; - loadables = "atf", "fip"; + loadables = "atf"; fdt = "fdt"; }; }; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index ccaf106be5..dfda4cb70e 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -138,6 +138,13 @@ config TARGET_IMX8MM_CL_IOT_GATE select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 + +config TARGET_IMX8MM_CL_IOT_GATE_OPTEE + bool "CompuLab iot-gate-imx8 with optee support" + select BINMAN + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4 endchoice source "board/beacon/imx8mm/Kconfig" diff --git a/board/compulab/imx8mm-cl-iot-gate/Kconfig b/board/compulab/imx8mm-cl-iot-gate/Kconfig index 7f5c794bf5..f32102f24b 100644 --- a/board/compulab/imx8mm-cl-iot-gate/Kconfig +++ b/board/compulab/imx8mm-cl-iot-gate/Kconfig @@ -1,4 +1,4 @@ -if TARGET_IMX8MM_CL_IOT_GATE +if TARGET_IMX8MM_CL_IOT_GATE || TARGET_IMX8MM_CL_IOT_GATE_OPTEE config SYS_BOARD default "imx8mm-cl-iot-gate" diff --git a/board/compulab/imx8mm-cl-iot-gate/MAINTAINERS b/board/compulab/imx8mm-cl-iot-gate/MAINTAINERS index 9c6b17095c..9db1fb6950 100644 --- a/board/compulab/imx8mm-cl-iot-gate/MAINTAINERS +++ b/board/compulab/imx8mm-cl-iot-gate/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/compulab/imx8mm-cl-iot-gate/ F: include/configs/imx8mm-cl-iot-gate.h F: configs/imx8mm-cl-iot-gate_defconfig +F: configs/imx8mm-cl-iot-gate-optee_defconfig diff --git a/configs/imx8mm-cl-iot-gate-optee_defconfig b/configs/imx8mm-cl-iot-gate-optee_defconfig new file mode 100644 index 0000000000..d918779960 --- /dev/null +++ b/configs/imx8mm-cl-iot-gate-optee_defconfig @@ -0,0 +1,147 @@ +CONFIG_ARM=y +CONFIG_SPL_SYS_ICACHE_OFF=y +CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_OFFSET=0x4400 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-cl-iot-gate-optee" +CONFIG_SPL_TEXT_BASE=0x7E1000 +CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg" +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_SHA1SUM=y +CONFIG_CMD_BIND=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_RTC=y +CONFIG_CMD_TIME=y +CONFIG_CMD_GETTIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_TPM=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=2 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_CLK_COMPOSITE_CCF=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_SPL_CLK_IMX8MM=y +CONFIG_CLK_IMX8MM=y +CONFIG_DFU_TFTP=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y +CONFIG_UDP_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x44000000 +CONFIG_FASTBOOT_BUF_SIZE=0x5000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=2 +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MXC=y +CONFIG_DM_KEYBOARD=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_FSL_ESDHC_IMX=y +CONFIG_DM_SPI_FLASH=y +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_BD71837=y +CONFIG_SPL_DM_PMIC_BD71837=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_BD71837=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RTC=y +CONFIG_RTC_ABX80X=y +CONFIG_MXC_UART=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_TEE=y +CONFIG_OPTEE=y +CONFIG_DM_THERMAL=y +CONFIG_TPM2_TIS_SPI=y +CONFIG_TPM2_FTPM_TEE=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_SDP_LOADADDR=0x40400000 +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_IMX_WATCHDOG=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPM=y +CONFIG_LZO=y +CONFIG_BZIP2=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_EFI_SET_TIME=y +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y +CONFIG_EFI_CAPSULE_ON_DISK=y +CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y +CONFIG_EFI_SECURE_BOOT=y -- 2.25.1

3 2

[PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash
by Adam Ford 23 Aug '21

23 Aug '21

There is a QSPI NOR flash part on the board. Because this chip isn't yet supported in Linux, but it is supported in U-Boot, and the face that the RPC_SPI compatible names are different in U-Boot and Linux, the device tree updates are confined to -u-boot.dtsi files. In order to use the QSPI, TF-A must leave RPC unlocked by compiling TF-A with RZG_RPC_HYPERFLASH_LOCKED=0. Signed-off-by: Adam Ford <aford173(a)gmail.com> Reviewed-by: Biju Bas <biju.das.jz(a)bp.renesas.com> --- V2: Add note to commit message about TF-A No functional changes diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi index a0c0a7f35c..06271537b7 100644 --- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi +++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi @@ -4,11 +4,19 @@ */ / { + aliases { + spi0 = &rpc; + }; + soc { u-boot,dm-pre-reloc; }; }; +&avb { + phy-mode = "rgmii-txid"; +}; + &cpg { u-boot,dm-pre-reloc; }; @@ -25,6 +33,25 @@ u-boot,dm-pre-reloc; }; +&rpc { + compatible = "renesas,rcar-gen3-rpc"; + num-cs = <1>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &sdhi0 { /delete-property/ cd-gpios; }; diff --git a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi index a0c0a7f35c..be0ce54e55 100644 --- a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi +++ b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi @@ -4,6 +4,10 @@ */ / { + aliases { + spi0 = &rpc; + }; + soc { u-boot,dm-pre-reloc; }; @@ -25,6 +29,25 @@ u-boot,dm-pre-reloc; }; +&rpc { + compatible = "renesas,rcar-gen3-rpc"; + num-cs = <1>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &sdhi0 { /delete-property/ cd-gpios; }; diff --git a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi index eef200af2d..228391e0df 100644 --- a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi +++ b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi @@ -4,6 +4,10 @@ */ / { + aliases { + spi0 = &rpc; + }; + soc { u-boot,dm-pre-reloc; }; @@ -25,6 +29,25 @@ u-boot,dm-pre-reloc; }; +&rpc { + compatible = "renesas,rcar-gen3-rpc"; + num-cs = <1>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &sdhi0 { /delete-property/ cd-gpios; sd-uhs-sdr12; diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig index 4a87a9a31f..c115f548a3 100644 --- a/configs/r8a774a1_beacon_defconfig +++ b/configs/r8a774a1_beacon_defconfig @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y CONFIG_BITBANGMII=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y @@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/r8a774b1_beacon_defconfig b/configs/r8a774b1_beacon_defconfig index 2c31222525..fe7bac048a 100644 --- a/configs/r8a774b1_beacon_defconfig +++ b/configs/r8a774b1_beacon_defconfig @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -48,6 +50,10 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_BITBANGMII=y CONFIG_PHY_REALTEK=y @@ -61,6 +67,9 @@ CONFIG_SCIF_CONSOLE=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_RENESAS_RPC_SPI=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/r8a774e1_beacon_defconfig b/configs/r8a774e1_beacon_defconfig index a814d6ad63..37097b0088 100644 --- a/configs/r8a774e1_beacon_defconfig +++ b/configs/r8a774e1_beacon_defconfig @@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y CONFIG_BITBANGMII=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y @@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y -- 2.17.1

2 4

[PATCH 0/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size
by Ying-Chun Liu 23 Aug '21

23 Aug '21

From: "Ying-Chun Liu (PaulLiu)" <paulliu(a)debian.org> When purchasing imx8mm-cl-iot-gate it is able to customize the memory size. It could be 1GB, 2GB and 4GB. We implement board_phys_sdram_size() to detect the memory size for usage. This patch was trying to fix the regression on mainline U-boot for imx8mm-cl-iot-gate. However this is not related to the regression. But we should have this implemented anyway. Ying-Chun Liu (PaulLiu) (1): arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size .../imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c | 25 +++++++++++++++++++ include/configs/imx8mm-cl-iot-gate.h | 2 +- 2 files changed, 26 insertions(+), 1 deletion(-) -- 2.32.0

4 5

Pull request for efi-2021-10-rc3
by Heinrich Schuchardt 23 Aug '21

23 Aug '21

Hello Tom, Ilias will be back on Monday. Then he can clarify with Simon the series "efi: Minimal revert to rodata change" https://patchwork.ozlabs.org/project/uboot/list/?series=256272. The following changes since commit a0da2dda4ed9d0aee5265e9cd8876734f9f80e09: Prepare v2021.10-rc2 (2021-08-16 14:18:45 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-2021-10-rc3 for you to fetch changes up to 9a4b3c8e914dbb9d06640d8e04db8a06dedca051: efi_loader: use EfiBootServicesData for DP to text (2021-08-17 17:24:08 +0200) ---------------------------------------------------------------- Pull request for efi-2021-10-rc3 Documentation: * Rename Freescale to NXP * Document structures used for the UEFI TCG2 protocol UEFI: * Device paths must use EfiBootServicesData ---------------------------------------------------------------- Heinrich Schuchardt (8): doc: move i.MX7D/i.MX8MM A/B booting to board specific doc: rename Freescale to NXP doc: move doc/board/st/st.rst efi_loader: use an enum for the memory allocation types efi_loader rename enum efi_mem_type to efi_memory_type efi_loader: use correct type for AllocatePages, AllocatePool efi_loader: use EfiBootServicesData for device path efi_loader: use EfiBootServicesData for DP to text Masahisa Kojima (1): efi_loader: add comment for efi_tcg2.h arch/x86/include/asm/hob.h | 2 +- doc/board/index.rst | 2 +- doc/board/{freescale => nxp}/imx8mm_evk.rst | 0 doc/board/{freescale => nxp}/imx8mn_evk.rst | 0 doc/board/{freescale => nxp}/imx8mp_evk.rst | 0 doc/board/{freescale => nxp}/imx8mq_evk.rst | 0 doc/board/{freescale => nxp}/imx8qxp_mek.rst | 0 doc/board/{freescale => nxp}/imxrt1020-evk.rst | 0 doc/board/{freescale => nxp}/imxrt1050-evk.rst | 0 doc/board/{freescale => nxp}/index.rst | 5 ++- doc/board/{freescale => nxp}/mx6sabreauto.rst | 0 doc/board/{freescale => nxp}/mx6sabresd.rst | 0 doc/board/{freescale => nxp}/mx6ul_14x14_evk.rst | 0 doc/board/{freescale => nxp}/mx6ullevk.rst | 0 doc/{imx/misc => board/nxp}/psb.rst | 0 doc/board/st/index.rst | 2 +- doc/board/st/{st.rst => st-dt.rst} | 0 doc/imx/index.rst | 9 ---- doc/imx/misc/index.rst | 9 ---- doc/index.rst | 11 ----- include/efi.h | 36 ++++++++++++--- include/efi_api.h | 2 +- include/efi_loader.h | 9 ++-- include/efi_tcg2.h | 57 ++++++++++++++++++++++-- lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_device_path_to_text.c | 2 +- lib/efi_loader/efi_memory.c | 5 ++- 27 files changed, 100 insertions(+), 53 deletions(-) rename doc/board/{freescale => nxp}/imx8mm_evk.rst (100%) rename doc/board/{freescale => nxp}/imx8mn_evk.rst (100%) rename doc/board/{freescale => nxp}/imx8mp_evk.rst (100%) rename doc/board/{freescale => nxp}/imx8mq_evk.rst (100%) rename doc/board/{freescale => nxp}/imx8qxp_mek.rst (100%) rename doc/board/{freescale => nxp}/imxrt1020-evk.rst (100%) rename doc/board/{freescale => nxp}/imxrt1050-evk.rst (100%) rename doc/board/{freescale => nxp}/index.rst (83%) rename doc/board/{freescale => nxp}/mx6sabreauto.rst (100%) rename doc/board/{freescale => nxp}/mx6sabresd.rst (100%) rename doc/board/{freescale => nxp}/mx6ul_14x14_evk.rst (100%) rename doc/board/{freescale => nxp}/mx6ullevk.rst (100%) rename doc/{imx/misc => board/nxp}/psb.rst (100%) rename doc/board/st/{st.rst => st-dt.rst} (100%) delete mode 100644 doc/imx/index.rst delete mode 100644 doc/imx/misc/index.rst

3 2

[PATCH v5 0/3] Support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs
by Frieder Schrempf 23 Aug '21

23 Aug '21

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> This a patchset to upstream the support for the SL i.MX6UL, SL i.MX6ULL and SL i.MX8MM families of SoMs and matching evaluation boards by Kontron Electronics. The first patch prepares the docs of the existing sl28 hardware to allow other boards to be added in the hierarchy. The second patch adds the i.MX6UL/ULL hardware and the third patch the i.MX8MM hardware. Frieder Schrempf (3): doc: board: kontron: sl28: Reduce section levels and change title imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) arch/arm/dts/Makefile | 6 +- .../dts/imx6ul-kontron-n631x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ul-kontron-n631x-s.dts | 17 + arch/arm/dts/imx6ul-kontron-n631x-som.dtsi | 14 + .../dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi | 63 + arch/arm/dts/imx6ul-kontron-n6x1x-s.dts | 423 ++++ arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi | 420 ++++ .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 124 ++ .../dts/imx6ull-kontron-n641x-s-u-boot.dtsi | 7 + arch/arm/dts/imx6ull-kontron-n641x-s.dts | 16 + arch/arm/dts/imx6ull-kontron-n641x-som.dtsi | 13 + arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 ++ .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 253 +++ arch/arm/dts/imx8mm-kontron-n801x-s.dts | 388 ++++ arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 298 +++ arch/arm/mach-imx/imx8m/Kconfig | 8 + arch/arm/mach-imx/mx6/Kconfig | 10 + board/kontron/sl-mx6ul/Kconfig | 15 + board/kontron/sl-mx6ul/MAINTAINERS | 9 + board/kontron/sl-mx6ul/Makefile | 8 + board/kontron/sl-mx6ul/sl-mx6ul.c | 85 + board/kontron/sl-mx6ul/spl.c | 377 ++++ board/kontron/sl-mx8mm/Kconfig | 15 + board/kontron/sl-mx8mm/MAINTAINERS | 8 + board/kontron/sl-mx8mm/Makefile | 9 + board/kontron/sl-mx8mm/imximage.cfg | 9 + board/kontron/sl-mx8mm/lpddr4_timing.c | 1844 +++++++++++++++++ board/kontron/sl-mx8mm/sl-mx8mm.c | 99 + board/kontron/sl-mx8mm/spl.c | 321 +++ configs/kontron-sl-mx6ul_defconfig | 108 + configs/kontron-sl-mx8mm_defconfig | 122 ++ doc/board/kontron/index.rst | 2 + doc/board/kontron/sl-mx6ul.rst | 43 + doc/board/kontron/sl-mx8mm.rst | 85 + doc/board/kontron/sl28.rst | 30 +- include/configs/kontron-sl-mx6ul.h | 78 + include/configs/kontron-sl-mx8mm.h | 84 + 37 files changed, 5518 insertions(+), 16 deletions(-) create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-s.dts create mode 100644 arch/arm/dts/imx6ul-kontron-n631x-som.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s.dts create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi create mode 100644 arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-s.dts create mode 100644 arch/arm/dts/imx6ull-kontron-n641x-som.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-som.dtsi create mode 100644 board/kontron/sl-mx6ul/Kconfig create mode 100644 board/kontron/sl-mx6ul/MAINTAINERS create mode 100644 board/kontron/sl-mx6ul/Makefile create mode 100644 board/kontron/sl-mx6ul/sl-mx6ul.c create mode 100644 board/kontron/sl-mx6ul/spl.c create mode 100644 board/kontron/sl-mx8mm/Kconfig create mode 100644 board/kontron/sl-mx8mm/MAINTAINERS create mode 100644 board/kontron/sl-mx8mm/Makefile create mode 100644 board/kontron/sl-mx8mm/imximage.cfg create mode 100644 board/kontron/sl-mx8mm/lpddr4_timing.c create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.c create mode 100644 board/kontron/sl-mx8mm/spl.c create mode 100644 configs/kontron-sl-mx6ul_defconfig create mode 100644 configs/kontron-sl-mx8mm_defconfig create mode 100644 doc/board/kontron/sl-mx6ul.rst create mode 100644 doc/board/kontron/sl-mx8mm.rst create mode 100644 include/configs/kontron-sl-mx6ul.h create mode 100644 include/configs/kontron-sl-mx8mm.h -- 2.32.0

3 5

[PATCH v1 0/7] board: toradex: verdin-imx8mm: target refresh
by Marcel Ziswiler 23 Aug '21

23 Aug '21

From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> An assortment of fixes and improvements like a legacy image generation fix, an Ethernet PHY configuration fix, DEK blob encapsulation preparation, migration to using binman to pack images, SLEEP_MOCI# enablement and dropping of V1.0 hardware support [1]. One last issue I am still trying to debug the root cause of. As already once mentioned back here [2] it still prints the following error message during boot: imx_wdt watchdog@30280000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 Note that this series is applied on top of Peng's Makefile fix [3] as otherwise, it may not quite generate all binman artefacts in the right order as discussed here [4]. [1] https://developer.toradex.com/verdin-sample-phase-over [2] https://marc.info/?l=u-boot&m=161786572422973 [3] https://marc.info/?l=u-boot&m=162908373904742 [4] https://marc.info/?l=u-boot&m=162945614207220 Marcel Ziswiler (5): imx: mkimage_fit_atf: fix legacy image generation imx8m: clean-up kconfig indentation verdin-imx8mm: fix ethernet ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation verdin-imx8mm: switch to use binman to pack images Max Krummenacher (2): verdin-imx8mm: enable sleep_moci output verdin-imx8mm: drop support for v1.0 hardware arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 129 +++++++++++++++++++- arch/arm/dts/imx8mm-verdin.dts | 20 ++- arch/arm/mach-imx/imx8m/Kconfig | 21 ++-- arch/arm/mach-imx/mkimage_fit_atf.sh | 26 ++-- board/toradex/verdin-imx8mm/imximage.cfg | 11 +- board/toradex/verdin-imx8mm/verdin-imx8mm.c | 77 +----------- configs/verdin-imx8mm_defconfig | 3 +- doc/board/toradex/verdin-imx8mm.rst | 54 ++++---- 8 files changed, 210 insertions(+), 131 deletions(-) -- 2.26.2

5 17