July 2021 - U-Boot

[PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value
by Wasim Khan 08 Jul '21

08 Jul '21

From: Wasim Khan <wasim.khan(a)nxp.com> NXP platforms expect bootcmd and mcinitcmd to be updated as per boot source. commit cbf77d201870f2d12227e2d95718a416b16ec98b breaks this behaviour. Revert commit cbf77d201870f2d12227e2d95718a416b16ec98b Signed-off-by: Wasim Khan <wasim.khan(a)nxp.com> --- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 27 +++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 7553b5bce2..ad209bde33 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -33,10 +33,13 @@ #include <fsl_validate.h> #endif #include <fsl_immap.h> +#ifdef CONFIG_TFABOOT +#include <env_internal.h> +#endif #include <dm.h> #include <dm/device_compat.h> #include <linux/err.h> -#ifdef CONFIG_GIC_V3_ITS +#if defined(CONFIG_TFABOOT) || defined(CONFIG_GIC_V3_ITS) DECLARE_GLOBAL_DATA_PTR; #endif @@ -953,12 +956,28 @@ int board_late_init(void) #endif #ifdef CONFIG_TFABOOT /* - * Set bootcmd and mcinitcmd if they don't exist in the environment. + * check if gd->env_addr is default_environment; then setenv bootcmd + * and mcinitcmd. + */ +#ifdef CONFIG_SYS_RELOC_GD_ENV_ADDR + if (gd->env_addr == (ulong)&default_environment[0]) { +#else + if (gd->env_addr + gd->reloc_off == (ulong)&default_environment[0]) { +#endif + fsl_setenv_bootcmd(); + fsl_setenv_mcinitcmd(); + } + + /* + * If the boot mode is secure, default environment is not present then + * setenv command needs to be run by default */ - if (!env_get("bootcmd")) +#ifdef CONFIG_CHAIN_OF_TRUST + if ((fsl_check_boot_mode_secure() == 1)) { fsl_setenv_bootcmd(); - if (!env_get("mcinitcmd")) fsl_setenv_mcinitcmd(); + } +#endif #endif #ifdef CONFIG_QSPI_AHB_INIT qspi_ahb_init(); -- 2.25.1

5 7

[PATCH] doc: fix typo in signature.txt
by Thomas Perrot 08 Jul '21

08 Jul '21

Fix value fields in signature nodes. Signed-off-by: Thomas Perrot <thomas.perrot(a)bootlin.com> --- doc/uImage.FIT/signature.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt index d9a912119032..7cb1c15e5e15 100644 --- a/doc/uImage.FIT/signature.txt +++ b/doc/uImage.FIT/signature.txt @@ -266,14 +266,14 @@ As an example, consider this FIT: data = <data for fdt1>; signature-1 { algo = "sha1,rsa2048"; - vaue = <...fdt signature 1...> + value = <...fdt signature 1...> }; }; fdt-2 { data = <data for fdt2>; signature-1 { algo = "sha1,rsa2048"; - vaue = <...fdt signature 2...> + value = <...fdt signature 2...> }; }; }; -- 2.31.1

2 1

[PATCH 00/18] Migrate to DM_USB and OF_CONTROL support
by Tom Rini 08 Jul '21

08 Jul '21

As I have mentioned in various release emails, now that various migration deadlines are reaching the 3+ year mark, I'm taking more drastic measures and removing boards or removing functionality from boards, in order to complete migrations. This series depends on the DM_PCI migration series I had posted earlier and can be seen here: https://patchwork.ozlabs.org/project/uboot/list/?series=243894&state=* With this series, I'm doing the DM_USB + OF_CONTROL migration. A number of kirkwood platforms already had OF_CONTROL support done, so a very minimal DM enablement is done, but should be tested on real hardware. I would guess that if they don't work, disabling CONFIG_SYS_MALLOC_F is wrong and it needs to be enabled and a LEN of 0x2000 used as well if the default is not large enough. In another set of cases, the boards are removed as other bigger migrations are also missing. This series, as well as the DM_PCI one and the DM_VIDEO and CONFIG_DM_SPI_FLASH series that will follow are intended to be applied after v2021.07 is released, and based on how the DM_MMC migration series was done for this release, probably around the -rc2 or -rc3 time-frame. So there is some time left yet to migrate boards, but the deadline is fast approaching. Thanks all! -- Tom

4 44

[PATCH 0/3] Add support for USB on ST-Ericsson Ux500
by Stephan Gerhold 08 Jul '21

08 Jul '21

This patch series adds support for USB on ST-Ericsson Ux500 by: - Adding a driver to talk to the AB8500 PMIC - Adding a driver to enable the USB PHY - Adding a simple Ux500 glue driver for the musb-new driver This was tested on the u8500 "stemmy" board that is already present in U-Boot. Stephan Gerhold (3): power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU phy: Add driver for ST-Ericsson AB8500 USB PHY usb: musb-new: Add glue driver for ST-Ericsson Ux500 drivers/phy/Kconfig | 6 + drivers/phy/Makefile | 1 + drivers/phy/phy-ab8500-usb.c | 54 +++++++ drivers/power/pmic/Kconfig | 10 ++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/ab8500.c | 258 +++++++++++++++++++++++++++++++ drivers/usb/musb-new/Kconfig | 11 +- drivers/usb/musb-new/Makefile | 1 + drivers/usb/musb-new/musb_core.c | 2 +- drivers/usb/musb-new/ux500.c | 179 +++++++++++++++++++++ include/power/ab8500.h | 125 +++++++++++++++ 11 files changed, 646 insertions(+), 2 deletions(-) create mode 100644 drivers/phy/phy-ab8500-usb.c create mode 100644 drivers/power/pmic/ab8500.c create mode 100644 drivers/usb/musb-new/ux500.c create mode 100644 include/power/ab8500.h -- 2.32.0

3 11

[PATCH] x86: Drop _X86EMU_env definition when CONFIG_BIOSEMU is used
by Bin Meng 08 Jul '21

08 Jul '21

With x86 we can execute an option ROM either natively or using the x86 emulator (if enabled with CONFIG_BIOSEMU). Both of these share the _X86EMU_env variable, with the native code using it to hold register state during interrupt processing. At present, in 32-bit U-Boot, the variable is declared twice, once in common code and once in code only compiled with CONFIG_BIOSEMU. With GCC 11 this causes a 'multiple definitions' error on boards with CONFIG_BIOSEMU. Drop the emulator definition when CONFIG_BIOSEMU is used. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- arch/x86/lib/bios.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/lib/bios.c b/arch/x86/lib/bios.c index fbdc3b04e3..98cc05de2e 100644 --- a/arch/x86/lib/bios.c +++ b/arch/x86/lib/bios.c @@ -23,7 +23,9 @@ static int (*int_handler[256])(void); /* to have a common register file for interrupt handlers */ +#ifndef CONFIG_BIOSEMU X86EMU_sysEnv _X86EMU_env; +#endif asmlinkage void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx, u32 esi, u32 edi); -- 2.25.1

3 3

Please pull u-boot-dm
by Simon Glass 08 Jul '21

08 Jul '21

Hi Tom, https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/8087 The following changes since commit 1311dd37ecf476be041d0452d4ee38619aadd5de: Merge branch '2021-07-01-update-CI-containers' (2021-07-05 15:29:44 -0400) are available in the Git repository at: git://git.denx.de/u-boot-dm.git tags/dm-pull-6jul21 for you to fetch changes up to 880e4768c20b99b1f9a50f35c180f8522dd82c9a: tools: Fix default target compile tools in Python tools (2021-07-06 10:38:03 -0600) ---------------------------------------------------------------- various minor sandbox improvements ---------------------------------------------------------------- Alper Nebi Yasak (2): sandbox: cros-ec: Add tests for the Chromium OS EC PWM driver tools: Fix default target compile tools in Python tools Heinrich Schuchardt (3): sandbox: ensure that state->ram_buf is in low memory sandbox: fix sandbox_reset() sandbox: don't refer to symbol _init Patrick Delaunay (1): dm: define LOG_CATEGORY for all uclass Rasmus Villemoes (1): remove struct uclass_driver::ops Simon Glass (1): sandbox: Support signal handling only when requested arch/sandbox/cpu/start.c | 33 +++++++++++----- arch/sandbox/dts/test.dts | 6 +++ arch/sandbox/include/asm/state.h | 1 + arch/sandbox/include/asm/test.h | 10 +++++ common/board_f.c | 4 +- configs/sandbox64_defconfig | 1 + configs/sandbox_defconfig | 1 + configs/sandbox_flattree_defconfig | 1 + configs/sandbox_noinst_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + drivers/adc/adc-uclass.c | 2 + drivers/ata/ahci-uclass.c | 2 + drivers/axi/axi-emul-uclass.c | 2 + drivers/axi/axi-uclass.c | 2 + drivers/block/blk-uclass.c | 2 + drivers/block/ide.c | 2 + drivers/bootcount/bootcount-uclass.c | 2 + drivers/button/button-uclass.c | 2 + drivers/cache/cache-uclass.c | 2 + drivers/clk/clk-uclass.c | 2 + drivers/core/root.c | 5 +-- drivers/core/simple-bus.c | 2 + drivers/cpu/cpu-uclass.c | 2 + drivers/crypto/rsa_mod_exp/mod_exp_uclass.c | 2 + drivers/dma/dma-uclass.c | 2 + drivers/firmware/firmware-uclass.c | 2 + drivers/hwspinlock/hwspinlock-uclass.c | 2 + drivers/i2c/i2c-emul-uclass.c | 2 + drivers/i2c/i2c-uclass.c | 2 + drivers/i2c/muxes/i2c-mux-uclass.c | 2 + drivers/input/keyboard-uclass.c | 2 + drivers/led/led-uclass.c | 2 + drivers/mailbox/mailbox-uclass.c | 2 + drivers/misc/cros_ec_sandbox.c | 47 ++++++++++++++++++++++ drivers/misc/fs_loader.c | 3 ++ drivers/misc/i2c_eeprom.c | 2 + drivers/misc/misc-uclass.c | 2 + drivers/misc/p2sb-uclass.c | 2 + drivers/misc/pwrseq-uclass.c | 2 + drivers/mmc/mmc-uclass.c | 2 + drivers/mtd/mtd-uclass.c | 2 + drivers/mtd/spi/sf-uclass.c | 2 + drivers/mux/mux-uclass.c | 2 + drivers/nvme/nvme-uclass.c | 2 + drivers/pch/pch-uclass.c | 2 + drivers/pci/pci-uclass.c | 2 + drivers/pci_endpoint/pci_ep-uclass.c | 2 + drivers/phy/phy-uclass.c | 2 + drivers/pinctrl/pinctrl-uclass.c | 2 + drivers/power/domain/power-domain-uclass.c | 2 + drivers/power/pmic/pmic-uclass.c | 2 + drivers/power/regulator/regulator-uclass.c | 2 + drivers/pwm/pwm-uclass.c | 2 + drivers/ram/ram-uclass.c | 2 + drivers/remoteproc/rproc-uclass.c | 3 ++ drivers/reset/reset-uclass.c | 2 + drivers/rng/rng-uclass.c | 2 + drivers/rtc/rtc-uclass.c | 2 + drivers/scsi/scsi-uclass.c | 2 + drivers/serial/serial-uclass.c | 2 + drivers/smem/smem-uclass.c | 2 + drivers/soc/soc-uclass.c | 2 + drivers/sound/codec-uclass.c | 2 + drivers/sound/i2s-uclass.c | 2 + drivers/sound/sound-uclass.c | 2 + drivers/spi/spi-emul-uclass.c | 2 + drivers/spmi/spmi-uclass.c | 2 + drivers/sysinfo/sysinfo-uclass.c | 2 + drivers/tee/tee-uclass.c | 2 + drivers/thermal/thermal-uclass.c | 2 + drivers/timer/timer-uclass.c | 2 + drivers/ufs/ufs-uclass.c | 2 + drivers/usb/emul/usb-emul-uclass.c | 2 + drivers/usb/gadget/udc/udc-uclass.c | 2 + drivers/usb/host/usb-uclass.c | 2 + drivers/video/backlight-uclass.c | 2 + drivers/video/bridge/video-bridge-uclass.c | 2 + drivers/video/display-uclass.c | 2 + drivers/video/dsi-host-uclass.c | 2 + drivers/video/panel-uclass.c | 2 + drivers/video/vidconsole-uclass.c | 2 + drivers/video/video-uclass.c | 2 + drivers/video/video_osd-uclass.c | 2 + drivers/virtio/virtio-uclass.c | 2 + drivers/w1-eeprom/w1-eeprom-uclass.c | 2 + drivers/w1/w1-uclass.c | 2 + drivers/watchdog/wdt-uclass.c | 2 + drivers/xen/pvblock.c | 3 ++ include/dm/uclass.h | 3 -- test/cmd/pwm.c | 32 ++++++++++++++- test/dm/Makefile | 1 + test/dm/cros_ec_pwm.c | 60 +++++++++++++++++++++++++++++ test/dm/panel.c | 2 +- test/dm/pwm.c | 6 ++- tools/patman/tools.py | 2 - 95 files changed, 348 insertions(+), 24 deletions(-) create mode 100644 test/dm/cros_ec_pwm.c Regards, Simon

2 1

[PATCH v2 0/2] mmc: Add support for checking device number against alias index
by Aswath Govindraju 08 Jul '21

08 Jul '21

The following series of patches, - add support to check for a device with a sequence number equal to device number before looking for matching index - assign device number by reading aliases node's index by using dev_seq Changes since v1: - In patch 2 used dev_seq instead of using dev_read_alias_seq for reading alias index. Aswath Govindraju (2): mmc: Check for device with a seq number equal to num before checking against index mmc: mmc-uclass: Use dev_seq() to read aliases node's index drivers/mmc/mmc-uclass.c | 12 +++++------- drivers/mmc/mmc.c | 8 +++++--- 2 files changed, 10 insertions(+), 10 deletions(-) -- 2.17.1

5 10

[PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support
by Masami Hiramatsu 08 Jul '21

08 Jul '21

Hi, Here is the 5th version of the series (including some fixes for build errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot. This series includes not only DeveloperBox support but also some fixes for the issues which I faced while porting U-Boot on the DeveloperBox. First 3 patches are fixes, next 1 patch is a code cleanup for generic gpio for arm. The next 7 patches adding DeveloperBox devices and board support. The last 2 patches are related to the UEFI capsule update. Previous version is here: https://lists.denx.de/pipermail/u-boot/2021-May/449305.html Changes in v5 ------------- I dripped dfu_mtd bugfix patch (previous [12/14]) from this, because Sughosh already fixed it. [11/13]: - Remove log level from config. DeveloperBox ============ DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: - * Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard * 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default) * 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots (1x slots are connected via PCIe bridge chip) * 4 USB-3.0 ports * 2 SATA ports * 1 GbE network port * 1 USB-UART serial port (micro USB) * 64MB SPI NOR Flash * 8GB eMMC Flash Storage * 96boards LS connector The DeveloperBox schematic can be found here: - https://www.96boards.org/documentation/enterprise/developerbox/hardware-doc… And the other documents can be found here: - https://www.96boards.org/documentation/enterprise/developerbox/ Currently, the U-Boot port supports: - * USB * eMMC * SPI-NOR * SATA * GbE The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default. The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as BL33, but no need to combine with it. Thank you, --- Jassi Brar (4): mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver spi: synquacer: Add HSSPI SPI controller driver for SynQuacer net: synquacer: Add netsec driver i2c: synquacer: SNI Synquacer I2C controller Masami Hiramatsu (9): ata: ahci-pci: Use scsi_ops to initialize ops dm: pci: Skip setting VGA bridge bits if parent device is the host bus efi: Fix to use null handle to create new handle for efi_fmp_raw gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs pci: synquacer: Add SynQuacer ECAM based PCIe driver ARM: dts: synquacer: Add device trees for DeveloperBox board: synquacer: Add DeveloperBox 96boards EE support doc: qemu: arm64: Fix the documentation of capsule update configs: synquacer: Enable EFI capsule update support arch/arm/Kconfig | 108 ++ arch/arm/dts/Makefile | 2 arch/arm/dts/synquacer-sc2a11-caches.dtsi | 73 + .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 75 + arch/arm/dts/synquacer-sc2a11-developerbox.dts | 56 + arch/arm/dts/synquacer-sc2a11.dtsi | 595 ++++++++++ arch/arm/include/asm/gpio.h | 8 board/socionext/developerbox/Kconfig | 36 + board/socionext/developerbox/MAINTAINERS | 14 board/socionext/developerbox/Makefile | 9 board/socionext/developerbox/developerbox.c | 146 +++ configs/synquacer_developerbox_defconfig | 129 ++ doc/board/emulation/qemu_capsule_update.rst | 11 doc/board/index.rst | 1 doc/board/socionext/developerbox.rst | 87 ++ doc/board/socionext/index.rst | 9 drivers/ata/ahci-pci.c | 2 drivers/i2c/Kconfig | 7 drivers/i2c/Makefile | 1 drivers/i2c/synquacer_i2c.c | 338 ++++++ drivers/mmc/Kconfig | 10 drivers/mmc/Makefile | 1 drivers/mmc/f_sdh30.c | 81 + drivers/net/Kconfig | 8 drivers/net/Makefile | 1 drivers/net/sni_netsec.c | 1134 ++++++++++++++++++++ drivers/pci/Kconfig | 12 drivers/pci/Makefile | 1 drivers/pci/pci-uclass.c | 3 drivers/pci/pcie_ecam_synquacer.c | 600 +++++++++++ drivers/spi/Kconfig | 8 drivers/spi/Makefile | 1 drivers/spi/spi-synquacer.c | 491 +++++++++ include/configs/synquacer.h | 115 ++ lib/efi_loader/efi_capsule.c | 2 35 files changed, 4158 insertions(+), 17 deletions(-) create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi create mode 100644 board/socionext/developerbox/Kconfig create mode 100644 board/socionext/developerbox/MAINTAINERS create mode 100644 board/socionext/developerbox/Makefile create mode 100644 board/socionext/developerbox/developerbox.c create mode 100644 configs/synquacer_developerbox_defconfig create mode 100644 doc/board/socionext/developerbox.rst create mode 100644 doc/board/socionext/index.rst create mode 100644 drivers/i2c/synquacer_i2c.c create mode 100644 drivers/mmc/f_sdh30.c create mode 100644 drivers/net/sni_netsec.c create mode 100644 drivers/pci/pcie_ecam_synquacer.c create mode 100644 drivers/spi/spi-synquacer.c create mode 100644 include/configs/synquacer.h -- Masami Hiramatsu <masami.hiramatsu(a)linaro.org>

4 19

[PATCH v2] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
by chenguanqiao 07 Jul '21

07 Jul '21

From: Chen Guanqiao <chenguanqiao(a)kuaishou.com> Fixed a defect of a null pointer being discovered by Coverity Scan: CID 331544: Null pointer dereferences (REVERSE_INULL) Null-checking "size" suggests that it may be null, but it has already been dereferenced on all paths leading to the check. Signed-off-by: Chen Guanqiao <chenguanqiao(a)kuaishou.com> --- drivers/core/ofnode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index eeeccfb446..dda6c76e83 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -329,7 +329,8 @@ static fdt_addr_t __ofnode_get_addr_size_index(ofnode node, int index, { int na, ns; - *size = FDT_SIZE_T_NONE; + if (size) + *size = FDT_SIZE_T_NONE; if (ofnode_is_np(node)) { const __be32 *prop_val; @@ -340,6 +341,7 @@ static fdt_addr_t __ofnode_get_addr_size_index(ofnode node, int index, &flags); if (!prop_val) return FDT_ADDR_T_NONE; + if (size) *size = size64; @@ -359,8 +361,6 @@ static fdt_addr_t __ofnode_get_addr_size_index(ofnode node, int index, index, na, ns, size, translate); } - - return FDT_ADDR_T_NONE; } fdt_addr_t ofnode_get_addr_size_index(ofnode node, int index, fdt_size_t *size) -- 2.27.0

2 1

[PATCH v3 0/8] common: Introduce crypt-style password support
by Steffen Jaeckel 07 Jul '21

07 Jul '21

This patchset introduces support for crypt-style passwords to unlock the console in autoboot mode. The implementation of crypt-sha256 and crypt-sha512 originate from libxcrypt at https://github.com/besser82/libxcrypt.git Version v4.4.17 Git commit hash 6b110bc I didn't re-format those two files to make diffing to the original versions from libxcrypt easier, which leads to a huge load of checkpatch.pl warnings&errors. Please advise on whether they should be re-formatted or can be kept as is. The remaining warnings from checkpatch.pl are intentional resp. open for discussion. A sandbox defconfig with password entry has been added. I'm not sure whether this should be kept or not, it's just there as an example. Cheers, Steffen Changes in v3: Add unit-tests for autoboot Introduce `bootstopusesha256` to allow fallback to plain SHA256-based hashing Add AUTOBOOT_FLUSH_STDIN option Drop the changes to bcm963158_ram_defconfig Changes in v2: Update Kconfig way of enabling, setting hashes etc. Changes in v1: Added unit-tests of crypt_compare() Wrapped crypt functions to encapsulate errno Steffen Jaeckel (8): lib: add crypt subsystem lib: wrap crypt API to hide errno usage common: integrate crypt-based passwords common: Rename macro appropriately common: allow disabling of timeout for password entry common: add AUTOBOOT_FLUSH_STDIN option common: add support to fallback to plain SHA256 test: add first autoboot unit tests common/Kconfig.boot | 65 ++++++- common/autoboot.c | 135 ++++++++++++-- common/console.c | 5 + configs/sandbox_defconfig | 11 ++ include/console.h | 17 ++ include/crypt.h | 14 ++ include/test/common.h | 15 ++ include/test/suites.h | 1 + lib/Kconfig | 1 + lib/Makefile | 1 + lib/crypt/Kconfig | 28 +++ lib/crypt/Makefile | 10 ++ lib/crypt/alg-sha256.h | 11 ++ lib/crypt/alg-sha512.h | 11 ++ lib/crypt/crypt-port.h | 30 ++++ lib/crypt/crypt-sha256.c | 335 ++++++++++++++++++++++++++++++++++ lib/crypt/crypt-sha512.c | 350 ++++++++++++++++++++++++++++++++++++ lib/crypt/crypt.c | 76 ++++++++ test/Kconfig | 9 + test/Makefile | 1 + test/cmd_ut.c | 1 + test/common/Makefile | 3 + test/common/cmd_ut_common.c | 22 +++ test/common/test_autoboot.c | 90 ++++++++++ test/lib/Makefile | 1 + test/lib/test_crypt.c | 64 +++++++ 26 files changed, 1285 insertions(+), 22 deletions(-) create mode 100644 include/crypt.h create mode 100644 include/test/common.h create mode 100644 lib/crypt/Kconfig create mode 100644 lib/crypt/Makefile create mode 100644 lib/crypt/alg-sha256.h create mode 100644 lib/crypt/alg-sha512.h create mode 100644 lib/crypt/crypt-port.h create mode 100644 lib/crypt/crypt-sha256.c create mode 100644 lib/crypt/crypt-sha512.c create mode 100644 lib/crypt/crypt.c create mode 100644 test/common/Makefile create mode 100644 test/common/cmd_ut_common.c create mode 100644 test/common/test_autoboot.c create mode 100644 test/lib/test_crypt.c -- 2.31.1

2 13